Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43661-2024 |
Surface chemical analysis - Scanning probe microscopy - Definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPM, such as SSRM and SCM) for two-dimensional imaging of dopants, etc. {译} 表面化学分析-扫描探针显微术-用于二维掺杂物成像等用途的电扫描探针显微镜（ESPM，如SSRM和SCM）空间分辨的定义和校准 |
China National Standards etc |
 English PDF |
| GB/T 43586-2023 |
Polyolefin cold stretch casing film {译} 聚烯烃冷拉伸套管膜 |
China National Standards etc |
English PDF |
| GB/T 17879-2023 |
Gears - chemical etching test for surface tempering after grinding {译} 齿轮 磨削后表面回火的化学浸蚀检验 |
China National Standards etc |
English PDF |
| GB/T 41652-2022 |
Silicon electrode and silicon ring for etching machine {译} 刻蚀机用硅电极及硅环 |
China National Standards etc |
English PDF |
| GB/T 22565.1-2021 |
Metallic materials -- Sheet and strip -- Method for spring back evaluation -- Part 1: Stretch bending 金属材料 薄板和薄带 回弹性能评估方法 第1部分：拉弯法 |
China National Standards etc |
English PDF |
| GB/T 24328.3-2020 |
Tissue paper and tissue products—Part 3: Determination of tensile strength, stretch at maximum force and tensile energy absorption 卫生纸及其制品 第3部分: 抗张强度、最大力值时伸长率和抗张能量吸收的测定 |
China National Standards etc |
English PDF |
| GB/T 29503-2020 |
Aluminium alloy stretched plates 铝合金预拉伸板 |
China National Standards etc |
English PDF |
| GB/T 31334.6-2020 |
Test methods for dipped canvas—Part 6 : Determinations of size, grammage, etc 浸胶帆布试验方法 第6部分：尺寸、克重等基本项目测量 |
China National Standards etc |
English PDF |
| GB/T 15711-2018 |
Inspection of non-metallic inclusions of steel—etching test method of tower samples 钢中非金属夹杂物的检验 塔形发纹酸浸法 |
China National Standards etc |
English PDF |
| GB/T 36690-2018 |
Method of determination for 26 elements（copper，nickel，lead，zinc，cadmium，chrome etc.） content in the sludge from industrial waste liquid treatment 工业废液处理污泥中铜、镍、铅、锌、镉、铬等26种元素含量测定方法 |
China National Standards etc |
English PDF |
| GB/T 34697-2017 |
Treatment and disposal method for spent fluoric etchant 含氟蚀刻废液处理处置方法 |
China National Standards etc |
English PDF |
| GB/T 34481-2017 |
Test method for measuring etch pit density (EPD) in low dislocation density monocrystalline germanium slices 低位错密度锗单晶片腐蚀坑密度(EPD)的测量方法 |
China National Standards etc |
English PDF |
| GB/T 14142-2017 |
Test method for crystallographic perfection of epitaxial layers in silicon—etching technique 硅外延层晶体完整性检验方法 腐蚀法 |
China National Standards etc |
English PDF |
| GB/T 33468-2016 |
Automatic one stage injection stretch and blow molding machine 全自动一步法注拉吹成型机 |
China National Standards etc |
English PDF |
| GB/T 32816-2016 |
Silicon-based MEMS fabrication technology—Specification for criterion of the combination of the deep etching and bonding process 硅基MEMS制造技术 以深刻蚀与键合为核心的工艺集成规范 |
China National Standards etc |
English PDF |
| GB 23200.37-2016 |
National food safety standards—Determination of residue of 20 pesticides including nitenpyram, dinotefuran etc in foods Liquid chromatography-tandem mass spectrometry 食品安全国家标准 食品中烯啶虫胺、呋虫胺等20种农药残留量的测定 液相色谱-质谱/质谱法 |
China National Standards etc |
English PDF |
| GB/T 226-2015 |
Test method for macrostructure and defect of steel by etching 钢的低倍组织及缺陷酸蚀检验法 |
China National Standards etc |
English PDF |
| GB/T 31528-2015 |
Treatment and disposal technical specification for spent coppery etchant 含铜蚀刻废液处理处置技术规范 |
China National Standards etc |
English PDF |
| GB/T 19981.2-2014 |
Textiles―Professional care,drycleaning and wetcleaning of fabrics and garments―Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene 纺织品 织物和服装的专业维护、干洗和湿洗 第2部分：使用四氯乙烯干洗和整烫时性能试验的程序 |
China National Standards etc |
English PDF |
| GB/T 19981.1-2014 |
Textiles—Professional care, drycleaning and wetcleaning of fabrics and garments—Part 1: Assessment of performance after cleaning and finishing 纺织品 织物和服装的专业维护、干洗和湿洗 第1部分: 清洗和整烫后性能的评价 |
China National Standards etc |
English PDF |
| GB/T 30868-2014 |
Test method for measuring micropipe density of monocrystalline silicon carbide wafers―Chemically etching 碳化硅单晶片微管密度的测定 化学腐蚀法 |
China National Standards etc |
English PDF |
| GB/T 15877-2013 |
Semiconductor integrated circuits—Specification of DIP leadframes produced by etching 半导体集成电路 蚀刻型双列封装引线框架规范 |
China National Standards etc |
English PDF |
| GB/T 29846-2013 |
Photoimageable plating and etching resist paste of printed circuit board 印制板用光成像耐电镀抗蚀剂 |
China National Standards etc |
English PDF |
| GB/T 29503-2013 |
aluminium alloy stretched plates 铝合金预拉伸板 |
China National Standards etc |
English PDF |
| GB/T 14999.2-2012 |
Test methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch 高温合金试验方法 第2部分：横向低倍组织及缺陷酸浸检验 |
China National Standards etc |
English PDF |
| GB/T 14999.1-2012 |
Test method for superalloys - Part 1: Verification of longitudinal macro-structures and defect by etch 高温合金试验方法 第1部分：纵向低倍组织及缺陷酸浸检验 |
China National Standards etc |
English PDF |
| GB/T 15861-2012 |
General specification of ion beam etching system 离子束蚀刻机通用规范 |
China National Standards etc |
English PDF |
| GB/T 28421-2012 |
Electronic toll collection － etc transaction for DSRC 电子收费 基于专用短程通信的电子收费交易 |
China National Standards etc |
English PDF |
| GB/T 28275-2012 |
Silicon-based MEMS fabrication technology - Specification for KOH etch process 硅基MEMS制造技术 氢氧化钾腐蚀工艺规范 |
China National Standards etc |
English PDF |
| GB/T 26956-2011 |
Destructive tests on welds in metallic materials - etchants for macroscopic and microscopic examination 金属材料焊缝破坏性试验 宏观和微观检验用侵蚀剂 |
China National Standards etc |
English PDF |
| GB/T 15796-2011 |
Rules for monitoring and forecast of the wheat head blight（Fusarium graminearum Schw. / Gibberella zeae (Schw.) Petch） 小麦赤霉病测报技术规范 |
China National Standards etc |
English PDF |
| GB/T 26066-2010 |
practice for shallow etch pit detection on silicon 硅晶片上浅腐蚀坑检测的测试方法 |
China National Standards etc |
English PDF |
| GB/T 17388-2010 |
Eletctric submersible pump installations 潜油电泵装置的安装 |
China National Standards etc |
English PDF |
| GB/T 24816-2009 |
Short link chain for lifting purposes - Grade 8,non-calibrated,for chain slings etc. 起重用短环链 吊链等用8级普通精度链 |
China National Standards etc |
English PDF |
| GB/T 24815-2009 |
Short link chain for lifting purposes - Grade 6,non-calibrated,for chain slings etc. 起重用短环链 吊链等用6级普通精度链 |
China National Standards etc |
English PDF |
| GB/T 24814-2009 |
Short link chain for lifting purposes - Grade 4,non-calibrated,for chain slings etc. 起重用短环链 吊链等用4级普通精度链 |
China National Standards etc |
English PDF |
| GB/T 24678.2-2009 |
Equipment for crop protection - The stretcher-mounted power sprayer with wide-swath and long-range 植物保护机械 担架式宽幅远射程喷雾机 |
China National Standards etc |
English PDF |
| GB/T 1554-2009 |
Testing method for crystallographic perfection of silicon by preferential etch techniques 硅晶体完整性化学择优腐蚀检验方法 |
China National Standards etc |
English PDF |
| GB/T 24328.3-2009 |
Tissue paper and tissue products - Part 3: Determination of tensile strength, stretch at break and tensile energy absorption 卫生纸及其制品 第3部分：抗张强度、断裂时伸长率和抗张能量吸收的测定 |
China National Standards etc |
English PDF |
| GB/T 24317-2009 |
Stretch wool top 拉伸羊毛毛条 |
China National Standards etc |
English PDF |
| GB/T 19981.4-2009 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning 纺织品 织物和服装的专业维护、干洗和湿洗 第4部分：使用模拟湿清洗和整烫时性能试验的程序 |
China National Standards etc |
English PDF |
| GB/T 19981.3-2009 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvent 纺织品 织物和服装的专业维护、干洗和湿洗 第3部分：使用烃类溶剂干洗和整烫时性能试验的程序 |
China National Standards etc |
English PDF |
| GB/T 22565-2008 |
Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending 金属材料 薄板和薄带 拉弯回弹评估方法 |
China National Standards etc |
English PDF |
| GB/T 6567.5-2008 |
Technical drawings - Graphical symbols for piping systems - Axonometric representation of graphical symbols for piping, piping accessories and valves etc. 技术制图 管路系统的图形符号 管路、管件和阀门等图形符号的轴测图画法 |
China National Standards etc |
English PDF |
| GB/T 5252-2006 |
Germanium monocrystal - inspection of dislocation etch pit density 锗单晶位错腐蚀坑密度测量方法 |
China National Standards etc |
English PDF |
| GB/T 19785-2005 |
Stretch packaging 拉伸缠绕包装 |
China National Standards etc |
English PDF |
| GB/T 17879-1999 |
Gears--Surface temper etch inspection after grinding 齿轮 磨削后表面回火的浸蚀检验 |
China National Standards etc |
English PDF |
| GB/T 15711-1995 |
Steel products--Method for etch test of towersample 钢材塔形发纹酸浸检验方法 |
China National Standards etc |
English PDF |
| GB/T 14142-1993 |
Test method for crystallographic perfection of epit-axial layers in silicon by etching techniques 硅外延层晶体完整性检查方法 腐蚀法 |
China National Standards etc |
English PDF |
| GB/T 226-1991 |
etch test for macrostructure and defect of steels 钢的低倍组织及缺陷酸蚀检验法 |
China National Standards etc |
English PDF |
| GB/T 11297.6-1989 |
Standard method for showing andmeasuring dislocation etch pits in indium antimonide single crystal 锑化铟单晶位错蚀坑的腐蚀显示及测量方法 |
China National Standards etc |
English PDF |
| Find out:51Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
