Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44165.3-2024 |
Detection methods for key chemical substances in consumer products-Part 3: Ethyl chloride {译} 消费品中重点化学物质检测方法-第3部分：氯代乙烷 |
China National Standards 3,3,3, |
 English PDF |
| GB/T 44148.3-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 3: Low temperature toughness nickel steel {译} 承压设备用钢锻件、轧制或锻制钢棒-第3部分:低温韧性镍钢 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42086.3-2024 |
Hydraulic transmission connection-flange connection-Part 3: 42-MPa, DN25~DN80 square series {译} 液压传动连接-法兰连接-第3部分：42-MPa、DN25～DN80方形系列 |
China National Standards 3,3,3, |
English PDF |
| GB/T 14034.3-2024 |
Hydraulic transmission connections - Metallic pipe joints - Part 3 Part: End seal {译} 液压传动连接-金属管接头-第3部分:端面密封 |
China National Standards 3,3,3, |
English PDF |
| GB/T 7260.3-2024 |
Uninterruptible power supply systems (UPS) - Part 3: Methods for determining performance and test requirements {译} 不间断电源系统（UPS）-第3部分：确定性能和试验要求的方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 5169.23-2024 |
Fire hazard tests for electrical and electronic products - Part 23: Test flame - 500W vertical flame test method for polymer tubular materials {译} 电工电子产品着火危险试验-第23部分：试验火焰-聚合物管形材料500W垂直火焰试验方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 17699.3-2024 |
Electronic data exchange for administration, commerce and transportation-Part 3: Segment directory {译} 行政、商业和运输业电子数据交换-第3部分：段目录 |
China National Standards 3,3,3, |
English PDF |
| GB/T 44086.2-2024 |
BeiDou-3 regional short message communication user terminal information interface-Part 2: General data interface口 {译} 北斗三号区域短报文通信用户终端信息接口-第2部分：通用数据接口 |
China National Standards 3,3,3, |
English PDF |
| GB/T 44086.1-2024 |
BeiDou-3 regional short message communication user terminal information interface-Part 1: User management module interface {译} 北斗三号区域短报文通信用户终端信息接口-第1部分：用户管理模块接口 |
China National Standards 3,3,3, |
English PDF |
| GB/T 44087-2024 |
Technical requirements and test methods for BeiDou-3 regional short message communication user terminals {译} 北斗三号区域短报文通信用户终端技术要求与测试方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 44083.3-2024 |
Road vehicles - Methods and rules for evaluating the usability of child restraint systems and their installation in vehicle fixing systems - Part 3: Riding and daily maintenance of child occupants in child restraint systems {译} 道路车辆-儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则-第3部分：儿童约束系统中儿童乘员的搭乘及日常维护 |
China National Standards 3,3,3, |
English PDF |
| GB/T 44067.3-2024 |
Industrial Internet platform - Technical requirements and test methods - Part 3: Industrial DaaS platform {译} 工业互联网平台-技术要求及测试方法-第3部分：工业DaaS平台 |
China National Standards 3,3,3, |
English PDF |
| GB/T 44126.2-2024 |
Road vehicles - Roller brake test bench test method for brake systems of vehicles with a maximum allowable total mass of more than 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems {译} 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 |
China National Standards 3,3,3, |
English PDF |
| GB/T 44044-2024 |
Road vehicles-Trailers below 3.5t-Requirements for support wheels and lifting devices {译} 道路车辆-3.5t以下挂车-支撑轮和升降装置要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 18802.331-2024 |
Low voltage surge protector components - Part 331: Performance requirements and test methods for metal oxide varistors (MOVs) {译} 低压电涌保护器元件-第331部分：金属氧化物压敏电阻（MOV）的性能要求和试验方法 |
China National Standards 3,3,3, |
English PDF |
| GB-14102.3-2024 |
Fire shutters - Part 3: Fire shutter controllers {译} 防火卷帘-第3部分：防火卷帘控制器 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 29014.3-2024 |
Cut Cutting tool data expression and exchange - Part 3: Tool project reference dictionary {译} 切削刀具数据表达与交换-第3部分：刀具项目参考字典 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 43963-2024 |
Guide to determining the values of electrical clearances, creepage distances and solid insulation requirements for equipment with rated voltages above 1000V to 2000V AC and above 1500V to 3000V DC {译} 确定额定电压在交流1000V以上至2000V，直流1500V以上至3000V间设备的电气间隙、爬电距离的数值以及对固体绝缘要求的指南 |
China National Standards 3,3,3, |
English PDF |
| GB/T 18336.3-2024 |
Network security technology - Information technology security assessment criteria - Part 3: Security assurance components {译} 网络安全技术-信息技术安全评估准则-第3部分：安全保障组件 |
China National Standards 3,3,3, |
English PDF |
| GB/T 18910.3-2024 |
Liquid crystal display devices - Part 3: Liquid crystal display screens - Sectional specifications {译} 液晶显示器件-第3部分：液晶显示屏-分规范 |
China National Standards 3,3,3, |
English PDF |
| GB/T 18910.63-2024 |
Liquid crystal display devices - Part 6-3: Test methods for liquid crystal display modules - Active matrix liquid crystal display =Motion artifacts of display modules {译} 液晶显示器件-第6-3部分：液晶显示模块测试方法-有源矩阵液晶显示模块运动伪像 |
China National Standards 3,3,3, |
English PDF |
| GB/T 20183.3-2024 |
Plant protection machinery - Spraying equipment - Part 3: Test method for evaluating the performance of the liquid dosage adjustment system per unit area {译} 植物保护机械-喷雾设备-第3部分：评价单位面积施药液量调节系统性能的试验方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 21832.3-2024 |
Austenitic-ferritic duplex stainless steel welded steel pipes - Part 3: Pipes for oil and gas transportation {译} 奥氏体-铁素体型双相不锈钢焊接钢管-第3部分：油气输送用管 |
China National Standards 3,3,3, |
English PDF |
| GB/T 21833.3-2024 |
Austenitic-ferritic duplex stainless steel seamless steel pipes - Part 3: Pipes for oil and gas transportation {译} 奥氏体-铁素体型双相不锈钢无缝钢管-第3部分：油气输送用管 |
China National Standards 3,3,3, |
English PDF |
| GB/T 32590.3-2024 |
Rail transit-Management and command/control systems for urban rail and urban rail transportation-Part 3: System requirements specifications {译} 轨道交通-市域铁路和城轨交通运输管理和指令/控制系统-第3部分：系统需求规范 |
China National Standards 3,3,3, |
English PDF |
| GB/T 36450.3-2024 |
Information technology - Storage management - Part 3: General profile {译} 信息技术-存储管理-第3部分：通用轮廓 |
China National Standards 3,3,3, |
English PDF |
| GB/T 38001.53-2024 |
Flexible display devices - Part 5-3: Visual evaluation method {译} 柔性显示器件-第5-3部分：目视评价方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 3880.3-2024 |
Aluminium and aluminium alloy plates and strips for general industrial use - Part 3: Dimensional deviation {译} 一般工业用铝及铝合金板、带材-第3部分：尺寸偏差 |
China National Standards 3,3,3, |
English PDF |
| GB/T 40344.3-2024 |
Vacuum technology - Standard methods for measuring the performance of vacuum pumps - Part 3: Specific parameters for mechanical booster pumps {译} 真空技术-真空泵性能测量标准方法-第3部分：机械增压泵的特定参数 |
China National Standards 3,3,3, |
English PDF |
| GB/T 4074.3-2024 |
Test methods for winding wires - Part 3: Mechanical properties {译} 绕组线试验方法-第3部分：机械性能 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43746.3-2024 |
Safety requirements for drilling and foundation construction equipment-Part 3: Piles and other foundation construction equipment {译} 钻孔和基础施工设备安全要求-第3部分：桩和其他基础施工设备 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43846.3-2024 |
Microscope-Nomenclature of microscope objectives-Part 3: spectral transmittance {译} 显微镜-显微镜物镜的命名-第3部分：光谱透射率 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43905.3-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 3: Determination of ozone emission rate during arc welding {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第3部分：电弧焊中臭氧排放速率的测定 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43917.3-2024 |
Welding fume capture and separation equipment-Part 3: Capture of fume suction devices on welding guns Determination of efficiency {译} 焊接烟尘捕集和分离设备-第3部分：焊枪上烟尘吸气装置捕集效率的测定 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43924.3-2024 |
Aerospace-MJ thread-Part 3: Limit dimensions of threads for fluid system pipe fittings {译} 航空航天-MJ螺纹-第3部分：流体系统管路件螺纹的极限尺寸 |
China National Standards 3,3,3, |
English PDF |
| GB/T 44021.3-2024 |
Audio, video and related equipment - Power consumption measurement - Part 3: Television sets {译} 音视频及相关设备-功耗测量-第3部分：电视机 |
China National Standards 3,3,3, |
English PDF |
| GB/T 4797.3-2024 |
Classification of environmental conditions - Natural environmental conditions - Part 3: Biological {译} 环境条件分类-自然环境条件-第3部分：生物 |
China National Standards 3,3,3, |
English PDF |
| GB/T 17903.3-2024 |
Information technology - Security technology - Non-repudiation - Part 3: Mechanisms using asymmetric technology {译} 信息技术-安全技术-抗抵赖-第3部分：采用非对称技术的机制 |
China National Standards 3,3,3, |
English PDF |
| GB/T 37364.3-2024 |
Technical regulations for surveying terrestrial wildlife and their habitats-Part 3: Mammals {译} 陆生野生动物及其栖息地调查技术规程-第3部分：兽类 |
China National Standards 3,3,3, |
English PDF |
| GB/T 23751.3-2024 |
Micro fuel cell power generation systems - Part 3: Interchangeability of fuel containers {译} 微型燃料电池发电系统-第3部分：燃料容器互换性 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43669-2024 |
Space data and information transmission system-Spacecraft 1553B bus communication protocol {译} 空间数据与信息传输系统-航天器1553B总线通信协议 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43657.3-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 3: Container handlers {译} 工业车辆能效-试验方法-第3部分：集装箱搬运车 |
China National Standards 3,3,3, |
English PDF |
| GB/T 18721.3-2024 |
Printing technology - prepress data exchange - Part 3: - CIELAB standard color image data (CIELAB/SCID) {译} 印刷技术-印前数据交换-第3部分：-CIELAB标准彩色图像数据（CIELAB/SCID） |
China National Standards 3,3,3, |
English PDF |
| GB/T 43603.3-2024 |
Chemical analysis methods for nickel-platinum target alloys - Part 3: Determination of carbon content - high-frequency infrared detection method - {译} 镍铂靶材合金化学分析方法-第3部分：碳含量的测定-高频红外检测法- |
China National Standards 3,3,3, |
English PDF |
| GB/T 43753.3-2024 |
Chemical analysis methods for precious metal alloy electroplating wastewater-Part 3: Sulfate content Determination of - barium sulfate gravimetric method {译} 贵金属合金电镀废水化学分析方法-第3部分：硫酸盐含量的测定-硫酸钡重量法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 25915.3-2024 |
Clean rooms and related controlled environments-Part 3: Detection methods {译} 洁净室及相关受控环境-第3部分：检测方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 11047.3-2024 |
Textiles-Detection and evaluation of fabric snagging properties-Part 3: Needle cloth roller method {译} 纺织品-织物勾丝性能的检测和评价-第3部分：针布滚筒法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43750-2024 |
Coaxial communication cable-Part 1-113:-Electrical test methods-Attenuation constant test {译} 各向同性稀土粘结永磁粉磁特性测量方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43730-2024 |
Industrial water quota-Part 13: Ethylene and propylene {译} 食品生产数据管理技术规范 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43793.2-2024 |
Test methods for color photoresist for flat panel displays-Part 3: Reliability {译} 平板显示用彩色光刻胶测试方法-第2部分：光学性能 |
China National Standards 3,3,3, |
English PDF |
| GB/T 40753.3-2024 |
Supply Chain Security Management System-ISO-28000 Implementation Guide-Part 4: Additional specific guidelines for the implementation of ISO-28000 with compliance to GB/T-38702 as the management target {译} 供应链安全管理体系-ISO-28000实施指南-第3部分：中小企业采用ISO-28000的附加特定指南（海港除外） |
China National Standards 3,3,3, |
English PDF |
| GB/T 43632-2024 |
Supply Chain Security Management System-ISO-28000 Implementation Guide-Part 3: Additional specific guidelines for the adoption of ISO-28000 by small and medium-sized enterprises (excluding seaports) {译} 供应链安全管理体系-供应链韧性的开发-要求及使用指南 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43880.2-2024 |
Service-oriented manufacturing-Guidelines-Part 3: Resource management {译} 服务型制造-导则-第2部分：基本模式 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43789.31-2024 |
Electronic paper display devices - Part 3-2: Test methods for optoelectronic properties {译} 电子纸显示器件-第3-1部分：光学性能测试方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43789.11-2024 |
Electronic paper display devices - Part 3-1: Test methods for optical properties {译} 电子纸显示器件-第1-1-部分：术语 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43590.501-2024 |
Laser display devices - Part 5-3: Test methods for image quality of laser projection displays (screens) {译} 激光显示器件-第5-1-部分：激光前投影显示光学性能测试方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 4937.35-2024 |
Semiconductor devices - Mechanical and climatic test methods - Part 35: Acoustic microscopy of plastic encapsulated electronic components {译} 半导体器件-机械和气候试验方法-第35部分：塑封电子元器件的声学显微镜检查 |
China National Standards 3,3,3, |
English PDF |
| GB/T 4937.34-2024 |
Semiconductor devices - Mechanical and climatic test methods - Part 34: Power cycling {译} 半导体器件-机械和气候试验方法-第34部分：功率循环 |
China National Standards 3,3,3, |
English PDF |
| GB/T 38624.3-2024 |
Internet of Things - Gateway - Part 3: Gateway test method for access to public telecommunications networks {译} 物联网-网关-第3部分：面向公共电信网接入的网关测试方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 31960.13-2024 |
Technical specifications for power energy efficiency monitoring systems - Part 13: Technical specifications for on-site handheld devices {译} 电力能效监测系统技术规范-第13部分：现场手持设备技术规范 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43529.3-2023 |
Standardizing the Registration and Delivery of Product Ontologies Using Spreadsheets Part 3: Common Information Model Interface {译} 利用电子表格标准化产品本体的注册和传递 第3部分：公共信息模型接口 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43524.1-2023 |
Subsea equipment Part 1: Power connectors, penetrations and jumper assemblies for rated voltages 3 kV (Umax=3.6 kV) to 30 kV (Umax=36 kV) {译} 水下设备 第1部分：额定电压3 kV（Umax＝3.6 kV）至30 kV（Umax＝36 kV）电源连接器、贯穿装置和跨接线组件 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43493.3-2023 |
Semiconductor devices - Non-destructive testing and identification criteria for defects in silicon carbide homoepitaxial wafers for power devices - Part 3: Photoluminescence detection method of defects {译} 半导体器件 功率器件用碳化硅同质外延片缺陷的无损检测识别判据 第3部分：缺陷的光致发光检测方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43481-2023 |
Additive manufacturing 3D process model data quality requirements {译} 增材制造 三维工艺模型数据质量要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42151.81-2023 |
Power automation communication networks and systems Part 8-1: Specific communication service mapping (SCSM) mapping to MMS (ISO 9506-1 and ISO 9506-2) and ISO/IEC 8802-3 {译} 电力自动化通信网络和系统 第8-1部分：特定通信服务映射（SCSM） 映射到MMS（ISO 9506-1和ISO 9506-2）和ISO/IEC 8802-3 |
China National Standards 3,3,3, |
English PDF |
| GB/T 39075.203-2023 |
Organic light-emitting diode (OLED) light sources for general lighting Safety Part 2-3: Special requirements Flexible OLED light sheets and panels {译} 普通照明用有机发光二极管（OLED）光源 安全 第2-3部分: 特殊要求 柔性OLED光片和面板 |
China National Standards 3,3,3, |
English PDF |
| GB/T 32151.13-2023 |
Carbon Emissions Accounting and Reporting Requirements Part 13: Independent Coking Enterprises {译} 碳排放核算与报告要求 第13部分：独立焦化企业 |
China National Standards 3,3,3, |
English PDF |
| GB/T 31308.3-2023 |
Data elements, processes and documents in administration, commerce and industry Long-lasting signatures Part 3: Long-lasting signature specifications for PDF Advanced Electronic Signatures (PAdES) {译} 行政、商业和行业中的数据元、过程和文档 长效签名 第3部分: PDF高级电子签名（PAdES）的长效签名规范 |
China National Standards 3,3,3, |
English PDF |
| GB/T 30420.3-2023 |
Sewing Machinery Terminology Part 3: Spreading and Cutting Equipment Terminology {译} 缝制机械术语 第3部分: 铺布裁剪设备术语 |
China National Standards 3,3,3, |
English PDF |
| GB/T 29627.3-2023 |
Polyaramid fiber paperboard for electrical applications Part 3: Individual material specifications {译} 电气用聚芳酰胺纤维纸板 第3部分：单项材料规范 |
China National Standards 3,3,3, |
English PDF |
| GB/T 27917.3-2023 |
Express Service Part 3: Service Links {译} 快递服务 第3部分：服务环节 |
China National Standards 3,3,3, |
English PDF |
| GB/T 25444.3-2023 |
Mobile and fixed offshore installations Electrical installations Part 3: Equipment {译} 移动式和固定式近海设施 电气装置 第3部分：设备 |
China National Standards 3,3,3, |
English PDF |
| GB/T 25022.3-2023 |
Rail transit rolling stock electrical connectors Part 3: Communication control connectors {译} 轨道交通 机车车辆电连接器 第3部分：通信控制连接器 |
China National Standards 3,3,3, |
English PDF |
| GB/T 23031.3-2023 |
Industrial Internet Platform Application Implementation Guide Part 3: Intelligent Manufacturing {译} 工业互联网平台 应用实施指南 第3部分：智能化制造 |
China National Standards 3,3,3, |
English PDF |
| GB/T 20186.3-2023 |
Secondary coating materials for optical fibers Part 3: Modified polycarbonate {译} 光纤用二次被覆材料 第3部分：改性聚碳酸酯 |
China National Standards 3,3,3, |
English PDF |
| GB/T 19510.213-2023 |
Light source control devices Part 2-13: Special requirements for DC or AC electronic control devices for LED modules {译} 光源控制装置 第2-13部分：LED模块用直流或交流电子控制装置的特殊要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 19510.203-2023 |
Light source control devices Part 2-3: Special requirements for AC and/or DC electronic control devices for fluorescent lamps {译} 光源控制装置 第2-3部分：荧光灯用交流和/或直流电子控制装置的特殊要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 17626.39-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 39: Close range radiated field immunity test {译} 电磁兼容 试验和测量技术 第39部分：近距离辐射场抗扰度试验 |
China National Standards 3,3,3, |
English PDF |
| GB/T 17626.30-2023 |
Electromagnetic compatibility - Testing and measurement technology - Part 30: Power quality measurement methods {译} 电磁兼容 试验和测量技术 第30部分：电能质量测量方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 17626.3-2023 |
Electromagnetic compatibility Testing and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test {译} 电磁兼容 试验和测量技术 第3部分：射频电磁场辐射抗扰度试验 |
China National Standards 3,3,3, |
English PDF |
| GB/T 14392.3-2023 |
International Trade Document Forms Part 3: Application Guide {译} 国际贸易单证样式 第3部分：应用指南 |
China National Standards 3,3,3, |
English PDF |
| GB/T 14196.3-2023 |
Incandescent lamps safety regulations part 3: tungsten halogen lamps (for non-motor vehicles) {译} 白炽灯 安全规范 第3部分：卤钨灯（非机动车辆用） |
China National Standards 3,3,3, |
English PDF |
| GB/Z 41275.23-2023 |
Avionics Process Management Aerospace and Defense Electronic Systems Containing Lead-Free Solder Part 23: Rework/Repair Guidelines for Lead-Free and Mixed Electronics {译} 航空电子过程管理 含无铅焊料航空航天及国防电子系统 第23部分：无铅及混装电子产品返工/修复指南 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 43533-2023 |
Integration of internal arc fault suppression systems in complete sets of power switches and control equipment (PSC complete sets) according to GB/T 7251.2-2023 {译} 依据GB/T 7251.2—2023的成套电力开关和控制设备（PSC成套设备）中内部电弧故障抑制系统的集成 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 25320.1003-2023 |
Power system management and its information exchange Data and communication security Part 100-3: Conformance test cases for IEC 62351-3 and secure communication extensions including the TCP/IP protocol suite {译} 电力系统管理及其信息交换 数据和通信安全 第100-3部分：IEC 62351-3的一致性测试用例和包括TCP/IP协议集的安全通信扩展 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 25320.1001-2023 |
Power system management and its information exchange Data and communication security Part 100-1: Conformance test cases for IEC 62351-5 and IEC TS 60870-5-7 {译} 电力系统管理及其信息交换 数据和通信安全 第100-1部分：IEC 62351-5和IEC TS 60870-5-7的一致性测试用例 |
China National Standards 3,3,3, |
English PDF |
| GB/T 9089.3-2023 |
Electrical installations under severe outdoor conditions Part 3: General requirements for equipment and accessories {译} 户外严酷条件下的电气设施 第3部分：设备及附件的一般要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 7679.3-2023 |
Mining Machinery Terminology Part 3: Lifting Equipment {译} 矿山机械术语 第3部分：提升设备 |
China National Standards 3,3,3, |
English PDF |
| GB/T 7256.3-2023 |
Civil airport navigation aids Part 3: Precision approach path indicators {译} 民用机场助航灯具 第3部分：精密进近航道指示器 |
China National Standards 3,3,3, |
English PDF |
| GB/T 7000.223-2023 |
Luminaires Part 2-23: Special requirements Extra-low voltage (ELV) lighting systems for use with extra-low voltage (ELV) light sources {译} 灯具 第2-23部分：特殊要求 特低电压（ELV）光源用特低电压照明系统 |
China National Standards 3,3,3, |
English PDF |
| GB/T 7000.213-2023 |
Luminaires Part 2-13: Special requirements Floor recessed luminaires {译} 灯具 第2-13部分：特殊要求 地面嵌入式灯具 |
China National Standards 3,3,3, |
English PDF |
| GB/T 5019.13-2023 |
Mica-based insulation materials Part 13: High thermal conductivity glass cloth reinforced low-adhesive mica tape {译} 以云母为基的绝缘材料 第13部分：高导热性玻璃布补强少胶云母带 |
China National Standards 3,3,3, |
English PDF |
| GB/T 2659.3-2023 |
Name codes of countries and regions around the world and their administrative divisions Part 3: Previously used country and region codes {译} 世界各国和地区及其行政区划名称代码 第3部分：原先使用的国家和地区代码 |
China National Standards 3,3,3, |
English PDF |
| GB 17799.3-2023 |
Electromagnetic Compatibility General Standard Part 3: Emissions from equipment in residential environments {译} 电磁兼容 通用标准 第3部分：居住环境中设备的发射 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 40104.103-2023 |
Solar thermal power station Part 1-3: General meteorological data set data format {译} 太阳能光热发电站 第1-3部分：通用 气象数据集数据格式 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43419.3-2023 |
Heavy metal management in rice fields Part 3: Physiological barrier {译} 稻田重金属治理 第3部分：生理阻隔 |
China National Standards 3,3,3, |
English PDF |
| GB/T 29165.3-2023 |
Oil and gas industry Glass fiber reinforced plastic pipes Part 3: System design {译} 石油天然气工业 玻璃纤维增强塑料管 第3部分：系统设计 |
China National Standards 3,3,3, |
English PDF |
| GB/T 21413.3-2023 |
Rail transit - Electrical equipment for rolling stock - Part 3: Electrical devices - Rules for DC circuit breakers {译} 轨道交通 机车车辆电气设备 第3部分：电工器件 直流断路器规则 |
China National Standards 3,3,3, |
English PDF |
| GB/T 30000.31-2023 |
Specifications for Classification and Labeling of Chemicals Part 31: Warning signs for chemical workplaces {译} 化学品分类和标签规范 第31部分：化学品作业场所警示性标志 |
China National Standards 3,3,3, |
English PDF |
| GB/T 16886.23-2023 |
Biological evaluation of medical devices Part 23: Stimulation test {译} 医疗器械生物学评价 第23部分：刺激试验 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42513.3-2023 |
Methods for chemical analysis of nickel alloys Part 3: Determination of aluminum content Nitrous oxide-flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry {译} 镍合金化学分析方法 第3部分：铝含量的测定 一氧化二氮-火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 6150.3-2023 |
Methods for chemical analysis of tungsten concentrates Part 3: Determination of phosphorus content Phosphomolybdenum yellow spectrophotometry and inductively coupled plasma atomic emission spectrometry {译} 钨精矿化学分析方法 第3部分：磷含量的测定 磷钼黄分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 27612.3-2023 |
Agricultural irrigation equipment sprinkler heads Part 3: Water volume distribution characteristics and test methods {译} 农业灌溉设备 喷头 第3部分：水量分布特性和试验方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 41312.3-2023 |
Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment {译} 化工用设备渗透性检测方法 第3部分：塑料及其衬里设备 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43279.3-2023 |
Molecular in vitro diagnostic tests. Specification of pre-test procedures for venous whole blood. Part 3: Isolation of plasma circulating cell-free DNA. {译} 分子体外诊断检验 静脉全血检验前过程的规范 第3部分：分离血浆循环游离DNA |
China National Standards 3,3,3, |
English PDF |
| GB/T 43432.3-2023 |
Metallic materials - Barcol hardness test Part 3: Calibration of standard hardness blocks {译} 金属材料 巴氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43407.3-2023 |
Road vehicles - Ergonomic requirements for driving areas of low-floor passenger buses running on dedicated lines - Part 3: Information devices and controls {译} 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第3部分：信息装置和控制器 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43403-2023 |
Road vehicles Trailers below 3.5t Quality inspection after fatigue test of welded traction brackets for connecting balls {译} 道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43400-2023 |
Road vehicles Trailers below 3.5t Calculation of mechanical strength of steel drawbars {译} 道路车辆 3.5t以下挂车 钢制牵引杆机械强度计算 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43399-2023 |
Road Vehicles Liquefied Natural Gas (LNG) Filling Connector 3.1MPa Connector {译} 道路车辆 液化天然气（LNG）加注连接器 3.1MPa连接器 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43258.3-2023 |
Road vehicles Diagnostic communications over Internet Protocol (DoIP) Part 3: Wired vehicle interface based on IEEE 802.3 {译} 道路车辆 基于因特网协议的诊断通信（DoIP） 第3部分：基于IEEE 802.3有线车辆接口 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43253.3-2023 |
Road vehicles - Functional safety audit and assessment methods Part 3: Software level {译} 道路车辆 功能安全审核及评估方法 第3部分：软件层面 |
China National Standards 3,3,3, |
English PDF |
| GB/T 23101.3-2023 |
Surgical implants Hydroxyapatite Part 3: Chemical analysis and characterization of crystallinity and phase purity {译} 外科植入物 羟基磷灰石 第3部分：结晶度和相纯度的化学分析和表征 |
China National Standards 3,3,3, |
English PDF |
| GB/T 28869.3-2023 |
Magnetic cores made of soft magnetic materials - Measurement methods - Part 3: Magnetic properties at high excitation levels {译} 软磁材料制成的磁心 测量方法 第3部分：高励磁水平下的磁特性 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43259.302-2023 |
Energy Management System Application Programming Interface (EMS-API) Part 302: Dynamic Part of the Common Information Model (CIM) {译} 能量管理系统应用程序接口（EMS-API）第302部分：公共信息模型（CIM）的动态部分 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43248-2023 |
Electric and hybrid vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz {译} 电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 5008.3-2023 |
Lead-acid batteries for starters Part 3: Product varieties, specifications and terminal dimensions for heavy-duty vehicles {译} 起动用铅酸蓄电池 第3部分：重载车辆产品品种规格和端子尺寸 |
China National Standards 3,3,3, |
English PDF |
| GB/T 23947.3-2023 |
General method for determination of arsenic in inorganic chemical products Part 3: Atomic fluorescence spectrometry {译} 无机化工产品中砷测定的通用方法 第3部分：原子荧光光谱法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 17529.3-2023 |
Acrylic acids and esters for industrial use Part 3: Ethyl acrylate for industrial use {译} 工业用丙烯酸及酯 第3部分：工业用丙烯酸乙酯 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43326.3-2023 |
Snow throwers - Safety requirements and test methods - Part 3: Mounted snow throwers {译} 抛雪机 安全要求和试验方法 第3部分：坐骑式抛雪机 |
China National Standards 3,3,3, |
English PDF |
| GB/T 25774.3-2023 |
Inspection of welding materials Part 3: Preparation and inspection of T-joint fillet weld specimens {译} 焊接材料的检验 第3部分：T型接头角焊缝试样的制备及检验 |
China National Standards 3,3,3, |
English PDF |
| GB/T 15558.3-2023 |
Buried polyethylene (PE) piping systems for gas use Part 3: Pipe fittings {译} 燃气用埋地聚乙烯（PE）管道系统 第3部分：管件 |
China National Standards 3,3,3, |
English PDF |
| GB/T 19494.3-2023 |
Mechanized sampling of coal Part 3: Determination of precision and bias testing {译} 煤炭机械化采样 第3部分：精密度测定和偏倚试验 |
China National Standards 3,3,3, |
English PDF |
| GB/T 13871.3-2023 |
Lip seals for rotating shafts with elastomeric sealing elements - Part 3: Storage, handling and installation {译} 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分：贮存、搬运和安装 |
China National Standards 3,3,3, |
English PDF |
| GB/T 19520.22-2023 |
Mechanical structures of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-110: Residential racks and cabinets for smart homes {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-110部分：智慧房屋用住宅机架和机柜 |
China National Standards 3,3,3, |
English PDF |
| GB/T 19520.21-2023 |
Mechanical Structure of Electrical and Electronic Equipment 482.6 mm (19 in) Series Mechanical Structure Dimensions Part 3-109: Chassis Dimensions of Embedded Computing Devices {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-109部分：嵌入式计算设备的机箱尺寸 |
China National Standards 3,3,3, |
English PDF |
| GB/T 19520.20-2023 |
Mechanical structure of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-108: Dimensions of R-type sub-boxes and plug-ins {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-108部分：R型插箱和插件的尺寸 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43316.3-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method {译} 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 19042.6-2023 |
Evaluation and routine testing of medical imaging departments Part 3-6: Imaging performance acceptance and stability testing of mammography X-ray equipment in breast tomosynthesis imaging mode {译} 医用成像部门的评价及例行试验 第3-6部分:乳腺断层合成成像模式下乳腺摄影X射线设备成像性能验收与稳定性试验 |
China National Standards 3,3,3, |
English PDF |
| GB 1886.354-2021 |
National Food Safety Standard Food Additive 3-[(4-Amino-2,2-dioxo-1H-2,1,3-benzothiadiazin-5-yl)oxy]-2,2-dimethyl- N-propylpropionamide {译} 食品安全国家标准 食品添加剂 3-[(4-氨基-2,2-二氧-1H-2,1,3-苯并噻二嗪-5-基)氧]-2,2-二甲基-N-丙基丙酰胺 |
China National Standards 3,3,3, |
English PDF |
| GB 1886.347-2021 |
National Food Safety Standard Food Additive 4-amino-5,6-dimethylthieno[2,3-d]pyrimidin-2(1H)-one hydrochloride {译} 食品安全国家标准 食品添加剂 4-氨基-5,6-二甲基噻吩并[2,3-d]嘧啶-2(1H)-酮盐酸盐 |
China National Standards 3,3,3, |
English PDF |
| GB/T 7190.3-2019 |
Mechanical draft cooling tower Part 3: Closed cooling tower "Modification No. 1" {译} 机械通风冷却塔 第3部分：闭式冷却塔《第1号修改单》 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 43202.2-2023 |
Application of Robot GB/T 36530 Part 2: Application Guide {译} 机器人 GB/T 36530的应用 第2部分：应用指南 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 21223.3-2023 |
Guidelines for statistical analysis of aging test data Part 3: Minimum number of specimens under different test conditions given test data {译} 老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量 |
China National Standards 3,3,3, |
English PDF |
| GB/T 5169.34-2023 |
Fire hazard tests for electrical and electronic products Part 34: Guidelines for fire hazard assessment Ignitability Summary and relevance of test methods {译} 电工电子产品着火危险试验 第34部分：着火危险评定导则 起燃性 试验方法概要和相关性 |
China National Standards 3,3,3, |
English PDF |
| GB/T 5169.33-2023 |
Fire hazard test for electrical and electronic products Part 33: Guidelines for fire hazard assessment Ignitability General principles {译} 电工电子产品着火危险试验 第33部分： 着火危险评定导则 起燃性 总则 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43201.3-2023 |
Industrial Automation Systems and Integration Standardized Procedures for Production Systems Engineering Part 3: Information Flow in the Production Planning Process {译} 工业自动化系统与集成 生产系统工程的标准化程序 第3部分：生产计划过程中的信息流 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43197-2023 |
Determination of banned components Acid Red 73 and Solvent Red 1 in cosmetics by liquid chromatography-tandem mass spectrometry {译} 化妆品中禁用组分酸性红73和溶剂红1的测定 液相色谱-串联质谱法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43094-2023 |
Trans-1-chloro-3,3,3-trifluoropropene for industrial use [HCFO-1233zd(E)] {译} 工业用反式-1-氯-3,3,3-三氟丙烯[HCFO-1233zd(E)] |
China National Standards 3,3,3, |
English PDF |
| GB/T 43080.3-2023 |
Ventilators Ventilator efficiency classes Part 3: Ventilators without maximum drive speed {译} 通风机 通风机效率等级 第3部分：不含驱动装置最高转速时的通风机 |
China National Standards 3,3,3, |
English PDF |
| GB/T 43034.3-2023 |
Integrated circuits - Measurement of pulse immunity - Part 3: Non-synchronous transient injection method {译} 集成电路 脉冲抗扰度测量 第3部分：非同步瞬态注入法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42983.3-2023 |
Industrial robot operation and maintenance Part 3: Health assessment {译} 工业机器人 运行维护 第3部分：健康评估 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42847.3-2023 |
Reversible mode fuel cell modules for energy storage systems Part 3: Electrical energy storage system performance test methods {译} 储能系统用可逆模式燃料电池模块 第3部分：电能储存系统性能测试方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42442.3-2023 |
Smart City Smart Parking Part 3: Platform Technical Requirements {译} 智慧城市 智慧停车 第3部分：平台技术要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42381.63-2023 |
Data Quality Part 63: Data Quality Management: Process Measurement {译} 数据质量 第63部分：数据质量管理：过程测量 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42381.130-2023 |
Data Quality Part 130: Master Data: Characteristic Data Exchange: Accuracy {译} 数据质量 第130部分：主数据：特征数据交换：准确性 |
China National Standards 3,3,3, |
English PDF |
| GB/T 40602.3-2023 |
Radio interference from antennas and receiving systems Part 3: Site measurements Compact site performance verification methods {译} 天线及接收系统的无线电干扰 第3部分：场地测量 紧缩场场地性能确认方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 39003.3-2023 |
Engineering data exchange format for industrial automation systems engineering Automation markup language Part 3: Geometry and kinematics {译} 工业自动化系统工程用工程数据交换格式 自动化标记语言 第3部分：几何学和运动学 |
China National Standards 3,3,3, |
English PDF |
| GB/T 38834.3-2023 |
Robots - Performance specifications and test methods for service robots - Part 3: Operation {译} 机器人 服务机器人性能规范及其试验方法 第3部分：操作 |
China National Standards 3,3,3, |
English PDF |
| GB/T 3780.30-2023 |
Carbon black Part 30: Determination of high temperature volatiles Thermogravimetric method {译} 炭黑 第30部分：高温挥发物的测定 热重法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 31596.3-2023 |
Social Security Terminology Part 3: Unemployment Insurance {译} 社会保险术语 第3部分: 失业保险 |
China National Standards 3,3,3, |
English PDF |
| GB/T 29493.3-2023 |
Determination of harmful substances in textile dyeing and finishing auxiliaries Part 3: Determination of organotin compounds {译} 纺织染整助剂中有害物质的测定 第3部分：有机锡化合物的测定 |
China National Standards 3,3,3, |
English PDF |
| GB/T 28712.3-2023 |
Heat exchanger types and basic parameters Part 3: U-shaped tube heat exchanger {译} 热交换器型式与基本参数 第3部分：U形管式热交换器 |
China National Standards 3,3,3, |
English PDF |
| GB/T 28059.3-2023 |
Highway Network Image Information Management System Platform Interconnection Technical Specifications Part 3: Interface and Communication Control Protocol {译} 公路网图像信息管理系统 平台互联技术规范 第3部分：接口与通信控制协议 |
China National Standards 3,3,3, |
English PDF |
| GB/T 27698.3-2023 |
Performance test methods for heat exchangers and heat transfer elements Part 3: Heat transfer elements {译} 热交换器及传热元件性能测试方法 第3部分：传热元件 |
China National Standards 3,3,3, |
English PDF |
| GB/T 20234.3-2023 |
Connecting devices for conductive charging of electric vehicles Part 3: DC charging interface {译} 电动汽车传导充电用连接装置 第3部分：直流充电接口 |
China National Standards 3,3,3, |
English PDF |
| GB/T 18975.13-2023 |
Industrial Automation Systems and Integration Process Plant (Including Oil and Gas Production Facilities) Life Cycle Data Integration Part 13: Integrated Asset Planning Life Cycle {译} 工业自动化系统与集成 流程工厂（包括石油和天然气生产设施）生命周期数据集成 第13部分：集成资产计划生命周期 |
China National Standards 3,3,3, |
English PDF |
| GB/T 17693.13-2023 |
Guidelines for Translating and Writing Chinese Characters of Place Names in Foreign Languages Part 13: Hindi {译} 外语地名汉字译写导则 第13部分:印地语 |
China National Standards 3,3,3, |
English PDF |
| GB/T 38329.3-2023 |
Port ship-to-shore connection Part 3: Low-voltage shore connection (LVSC) systems General requirements {译} 港口船岸连接 第3部分：低压岸电连接(LVSC)系统 一般要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 6609.35-2023 |
Methods for chemical analysis and determination of physical properties of alumina Part 35: Determination of specific surface area Nitrogen adsorption method {译} 氧化铝化学分析方法和物理性能测定方法 第35部分：比表面积的测定 氮吸附法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 20147.3-2023 |
Colorimetry Part 3: CIE Tristimulus Values {译} 色度学 第3部分：CIE三刺激值 |
China National Standards 3,3,3, |
English PDF |
| GB/T 20564.13-2023 |
High-strength cold-rolled steel plates and strips for automobiles Part 13: Medium manganese steel {译} 汽车用高强度冷连轧钢板及钢带 第13部分：中锰钢 |
China National Standards 3,3,3, |
English PDF |
| GB/T 713.3-2023 |
Steel plates and strips for pressure equipment Part 3: Low alloy steels with specified low temperature properties {译} 承压设备用钢板和钢带 第3部分：规定低温性能的低合金钢 |
China National Standards 3,3,3, |
English PDF |
| GB/T 34033.3-2023 |
Ships and Offshore Technology Risk Assessment of Ship Antifouling Systems Part 3: Methods for Human Health Risk Assessment of Antifouling Active Substances During the Application and Removal of Marine Antifouling Primers {译} 船舶与海上技术 船舶防污底系统风险评估 第3部分：船用防污底涂料应用和去除过程中防污活性物质的人体健康风险评估方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 21888-2023 |
C.I. Acid Red 131 (Acid Brilliant Red P-9B 150%) {译} C.I.酸性红131（酸性艳红P-9B 150%） |
China National Standards 3,3,3, |
English PDF |
| GB/T 20818.13-2023 |
Industrial process measurement and control. Data structures and elements in process equipment catalogs. Part 13: List of properties (LOP) for electronic data exchange of pressure measuring equipment. {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第13部分：压力测量设备电子数据交换用属性列表（LOP） |
China National Standards 3,3,3, |
English PDF |
| GB/T 42828.3-2023 |
General techniques for improving saline-alkali land Part 3: Biological improvement {译} 盐碱地改良通用技术 第3部分：生物改良 |
China National Standards 3,3,3, |
English PDF |
| GB/T 19831.3-2023 |
Oil and gas industry Casing centralizers Part 3: Rigid and semi-rigid centralizers {译} 石油天然气工业 套管扶正器 第3部分：刚性和半刚性扶正器 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42919.3-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method {译} 塑料 导热系数和热扩散系数的测定 第3部分：温度波分析法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42746-2023 |
Adult 3D foot model {译} 成年人三维足部模型 |
China National Standards 3,3,3, |
English PDF |
| GB/T 7939.3-2023 |
Hydraulic power connections - Test methods - Part 3: Hose assemblies {译} 液压传动连接 试验方法 第3部分：软管总成 |
China National Standards 3,3,3, |
English PDF |
| GB/T 41638.3-2023 |
Plastics - Carbon and environmental footprints of bio-based plastics - Part 3: Requirements and guidelines for the quantification of process carbon footprints {译} 塑料 生物基塑料的碳足迹和环境足迹 第3部分：过程碳足迹 量化要求与准则 |
China National Standards 3,3,3, |
English PDF |
| GB/T 12604.13-2023 |
Non-destructive testing - Terminology - Part 13: Array ultrasonic testing {译} 无损检测 术语 第13部分：阵列超声检测 |
China National Standards 3,3,3, |
English PDF |
| GB/T 6683.3-2023 |
Petroleum and related products—Measurement methods and precision of results—Part 3: Monitoring and verification of published precision data for test methods {译} 石油及相关产品 测量方法与结果精密度 第3部分：试验方法已发布精密度数据的监测和验证 |
China National Standards 3,3,3, |
English PDF |
| GB/T 9239.31-2023 |
Mechanical vibration - Rotor balancing - Part 31: Machine unbalance variability and unbalance sensitivity {译} 机械振动 转子平衡 第31部分： 机器不平衡易变性和不平衡灵敏度 |
China National Standards 3,3,3, |
English PDF |
| GB/T 4798.3-2023 |
Classification of environmental conditions Classification of environmental parameter groups and their severity classification Part 3: Stationary use in places with weather protection {译} 环境条件分类 环境参数组分类及其严酷程度分级 第3部分：有气候防护场所固定使用 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42596.3-2023 |
Safety of machine tools - Presses - Part 3: Safety requirements for hydraulic presses {译} 机床安全 压力机 第3部分：液压机安全要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 15000.3-2023 |
Working guidelines for standard samples - Part 3: Standard samples - Determination and evaluation of homogeneity and stability {译} 标准样品工作导则 第3部分：标准样品 定值和均匀性与稳定性评估 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42691.3-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 3: Protocol specification {译} 道路车辆 局域互联网络（LIN） 第3部分：协议规范 |
China National Standards 3,3,3, |
English PDF |
| GB/T 14034.2-2023 |
Hydraulic power connections - Metallic pipe fittings - Part 2: 37° flared {译} 液压传动连接 金属管接头 第2部分：37°扩口式 |
China National Standards 3,3,3, |
English PDF |
| GB/T 304.3-2023 |
Spherical bearings - Part 3: Fits {译} 关节轴承 第3部分：配合 |
China National Standards 3,3,3, |
English PDF |
| GB/T 41815.3-2023 |
Information technology - Biometric presence attack detection - Part 3: Testing and reporting {译} 信息技术 生物特征识别呈现攻击检测 第3部分：测试与报告 |
China National Standards 3,3,3, |
English PDF |
| GB/T 23698-2023 |
General requirements for 3D scanning anthropometric methods {译} 三维扫描人体测量方法的一般要求 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42756.3-2023 |
Card and identification security devices - Contactless proximity objects - Part 3: Initialization and anti-collision {译} 卡及身份识别安全设备 无触点接近式对象 第3部分：初始化和防冲突 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42567.3-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 3: Specific procedures for temperature transmitters {译} 工业过程测量变送器试验的参比条件和程序 第3部分：温度变送器的特定程序 |
China National Standards 3,3,3, |
English PDF |
| GB/T 26237.13-2023 |
Information technology - Biometric data exchange format - Part 13: Voice data {译} 信息技术 生物特征识别数据交换格式 第13部分：声音数据 |
China National Standards 3,3,3, |
English PDF |
| GB/T 28826.3-2023 |
Information technology—Common biometric interchange format framework—Part 3: Maintainer format specification {译} 信息技术 公用生物特征识别交换格式框架 第3部分：维护者格式规范 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42474.3-2023 |
Safety monitoring system for vehicle transportation of explosive hazardous chemicals Part 3: Installation of vehicle-mounted devices {译} 爆炸危险化学品汽车运输安全监控系统 第3部分：车载装置安装 |
China National Standards 3,3,3, |
English PDF |
| GB/T 4937.23-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life {译} 半导体器件 机械和气候试验方法 第23部分：高温工作寿命 |
China National Standards 3,3,3, |
English PDF |
| GB/T 4937.32-2023 |
Semiconductor devices - Methods of mechanical and climatic tests - Part 32: Flammability of plastic encapsulated devices (externally induced) {译} 半导体器件 机械和气候试验方法 第32部分：塑封器件的易燃性（外部引起的） |
China National Standards 3,3,3, |
English PDF |
| GB/T 4937.31-2023 |
Semiconductor devices - Methods of mechanical and climatic tests - Part 31: Flammability of plastic encapsulated devices (internal origin) {译} 半导体器件 机械和气候试验方法 第31部分：塑封器件的易燃性（内部引起的） |
China National Standards 3,3,3, |
English PDF |
| GB/T 41232.3-2023 |
Nanofabrication Key Control Properties Nanoscale Energy Storage Part 3: Measurement of Contact Resistivity and Coating Resistivity of Nanomaterials {译} 纳米制造 关键控制特性 纳米储能 第3部分：纳米材料接触电阻率和涂层电阻率的测试 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42749.3-2023 |
Information Technology IT Enablement Services Business Process Outsourcing (ITES-BPO) Life Cycle Processes Part 3: Measurement Framework (MF) and Organizational Maturity Model (OMM) {译} 信息技术 IT赋能服务业务过程外包（ITES-BPO）生存周期过程 第3部分：度量框架（MF）和组织成熟度模型(OMM) |
China National Standards 3,3,3, |
English PDF |
| GB/T 42601.3-2023 |
Petroleum, heavy chemical and natural gas industries - Lubrication, shaft sealing and control oil systems and auxiliary equipment - Part 3: Oil systems for general purposes {译} 石油、重化学和天然气工业 润滑、轴密封和控制油系统及辅助设备 第3部分：一般用途的油系统 |
China National Standards 3,3,3, |
English PDF |
| GB/T 42629.3-2023 |
International Code of Conduct for Environmental Surveys of Seabed Areas and the High Seas Part 3: Surveys of Marine Life {译} 国际海底区域和公海环境调查规程 第3部分：海洋生物调查 |
China National Standards 3,3,3, |
English PDF |
| GB/T 14191.3-2023 |
Prosthetics and orthotics - Terminology - Part 3: Terminology for orthotics {译} 假肢学和矫形器学 术语 第3部分：矫形器术语 |
China National Standards 3,3,3, |
English PDF |
| GB/Z 17626.33-2023 |
Electromagnetic compatibility - Testing and measurement techniques - Part 33: Measurement methods for high power transient parameters {译} 电磁兼容 试验和测量技术 第33部分：高功率瞬态参数测量方法 |
China National Standards 3,3,3, |
English PDF |
| GB/T 11060.13-2023 |
Natural gas - Determination of sulfur compounds - Part 13: Determination of hydrogen sulfide content by ultraviolet absorption method {译} 天然气 含硫化合物的测定 第13部分：用紫外吸收法测定硫化氢含量 |
China National Standards 3,3,3, |
English PDF |
| GB/T 5750.13-2023 |
Standard Examination Methods for Drinking Water - Part 13: Radioactive Indicators {译} 生活饮用水标准检验方法 第13部分：放射性指标 |
China National Standards 3,3,3, |
English PDF |
| GB/T 5750.3-2023 |
Standard test methods for drinking water - Part 3: Quality control for water quality analysis {译} 生活饮用水标准检验方法 第3部分：水质分析质量控制 |
China National Standards 3,3,3, |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
