Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44155-2024 |
Steel forgings-Test frequency, sampling conditions and test methods for mecHanical properties tests {译} 钢锻件-力学性能试验的检测频次、取样条件和试验方法 |
China National Standards Han |
 English PDF |
| GB/T 43723-2024 |
Performance requirements for semi-integrated LED lamps with a power supply voltage not greater tHan 50V AC effective value or 120V DC without ripple for general lighting {译} 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯-性能要求 |
China National Standards Han |
English PDF |
| GB/T 44122-2024 |
Industrial Internet platform - Industrial mecHanism model development guide {译} 工业互联网平台-工业机理模型开发指南 |
China National Standards Han |
English PDF |
| GB/T 17699.1-2024 |
Electronic data excHange for administration, commerce and transportation-Part 1: Data element directory {译} 行政、商业和运输业电子数据交换-第1部分：数据元目录 |
China National Standards Han |
English PDF |
| GB/T 17699.2-2024 |
Electronic data excHange for administration, commerce and transportation-Part 2: Composite data element directory {译} 行政、商业和运输业电子数据交换-第2部分：复合数据元目录 |
China National Standards Han |
English PDF |
| GB/T 17699.3-2024 |
Electronic data excHange for administration, commerce and transportation-Part 3: Segment directory {译} 行政、商业和运输业电子数据交换-第3部分：段目录 |
China National Standards Han |
English PDF |
| GB/T 9536.1-2024 |
ElectromecHanical switches for electrical and electronic equipment-Part 1: General specifications {译} 电气和电子设备用机电开关-第1部分：总规范 |
China National Standards Han |
English PDF |
| GB/T 7939.2-2024 |
Hydraulic transmission connection - Test method - Part 2: Quick-cHange connector {译} 液压传动连接-试验方法-第2部分：快换接头 |
China National Standards Han |
English PDF |
| GB/T 44126.2-2024 |
Road vehicles - Roller brake test bench test method for brake systems of vehicles with a maximum allowable total mass of more tHan 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems {译} 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 |
China National Standards Han |
English PDF |
| GB/T 13880-2024 |
Road vehicles-Drawbar-IntercHangeability {译} 道路车辆-牵引座-互换性 |
China National Standards Han |
English PDF |
| GB/T 44041-2024 |
Road vehicles-40 mm drawbar hook-IntercHangeability {译} 道路车辆-40毫米牵引杆挂环-互换性 |
China National Standards Han |
English PDF |
| GB/T 44075-2024 |
Nanotechnology-surface enHanced Raman solid-phase substrate uniformity measurement-Raman imaging analysis method {译} 纳米技术-表面增强拉曼固相基片均匀性测量-拉曼成像分析法 |
China National Standards Han |
English PDF |
| GB/T 44130.1-2024 |
Electric vehicle charging and swapping service information excHange - Part 1: General {译} 电动汽车充换电服务信息交换-第1部分:总则 |
China National Standards Han |
English PDF |
| GB-31830-2024 |
Energy consumption limit per unit product for toluene diisocyanate and diphenylmetHane diisocyanate {译} 甲苯二异氰酸酯和二苯基甲烷二异氰酸酯单位产品能源消耗限额 |
China National Standards Han |
English PDF |
| GB-21257-2024 |
Energy consumption limits per unit product of caustic soda, polyvinyl chloride resin and metHane chloride {译} 烧碱、聚氯乙烯树脂和甲烷氯化物单位产品能源消耗限额 |
China National Standards Han |
English PDF |
| GB/Z 29014.3-2024 |
Cut Cutting tool data expression and excHange - Part 3: Tool project reference dictionary {译} 切削刀具数据表达与交换-第3部分：刀具项目参考字典 |
China National Standards Han |
English PDF |
| GB/T 23561.11-2024 |
Methods for determination of physical and mecHanical properties of coal and rock - Part 11: Determination of shear strength of coal and rock {译} 煤和岩石物理力学性质测定方法-第11部分：煤和岩石抗剪强度测定方法 |
China National Standards Han |
English PDF |
| GB/T 23561.1-2024 |
Methods for determination of physical and mecHanical properties of coal and rock - Part 1: General provisions for sampling {译} 煤和岩石物理力学性质测定方法-第1部分：采样一般规定 |
China National Standards Han |
English PDF |
| GB/T 2820.9-2024 |
Alternating current generator sets driven by reciprocating internal combustion engines - Part 9: Measurement and evaluation of mecHanical vibrations {译} 往复式内燃机驱动的交流发电机组-第9部分：机械振动的测量和评价 |
China National Standards Han |
English PDF |
| GB/T 3880.2-2024 |
Aluminium and aluminium alloy plates and strips for general industrial use - Part 2: MecHanical properties {译} 一般工业用铝及铝合金板、带材-第2部分：力学性能 |
China National Standards Han |
English PDF |
| GB/T 40344.3-2024 |
Vacuum technology - Standard methods for measuring the performance of vacuum pumps - Part 3: Specific parameters for mecHanical booster pumps {译} 真空技术-真空泵性能测量标准方法-第3部分：机械增压泵的特定参数 |
China National Standards Han |
English PDF |
| GB/T 40565.1-2024 |
Hydraulic transmission connections - Quick-cHange connectors - Part 1: General type {译} 液压传动连接-快换接头-第1部分：通用型 |
China National Standards Han |
English PDF |
| GB/T 4074.3-2024 |
Test methods for winding wires - Part 3: MecHanical properties {译} 绕组线试验方法-第3部分：机械性能 |
China National Standards Han |
English PDF |
| GB/T 43259.556-2024 |
Energy management system application program interface (EMS-API) Part 556: Based on CIM graphics excHange format (CIM/G) {译} 能量管理系统应用程序接口（EMS-API）第556部分：基于CIM图形交换格式（CIM/G） |
China National Standards Han |
English PDF |
| GB/T 43891-2024 |
Non-metallic chemical equipment - Test method for heat transfer coefficient and flow resistance performance of impermeable graphite heat excHangers {译} 非金属化工设备-不透性石墨换热器传热系数和流阻性能测试方法 |
China National Standards Han |
English PDF |
| GB/T 43938.1-2024 |
Test method for mecHanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 1: Tensile test {译} 碳纤维增强复合材料薄壁管件力学性能试验方法-第1部分：拉伸试验 |
China National Standards Han |
English PDF |
| GB/T 43938.2-2024 |
Test method for mecHanical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 2: Compression test {译} 碳纤维增强复合材料薄壁管件力学性能试验方法-第2部分：压缩试验 |
China National Standards Han |
English PDF |
| GB/T 43976-2024 |
Electronic gas - tetrafluorometHane {译} 电子气体-四氟甲烷 |
China National Standards Han |
English PDF |
| GB/T 43997.1-2024 |
Surface Temperature Thermal Infrared Remote Sensing Inversion - Part 1: Single CHannel Method {译} 地表温度热红外遥感反演-第1部分：单通道法 |
China National Standards Han |
English PDF |
| GB/T 44003-2024 |
MecHanical Property Measurement - Test Method for Delamination Strength of REBCO Coated Conductors (Copper Plating) {译} 力学性能测量-REBCO涂层导体（镀铜）脱层强度测试方法 |
China National Standards Han |
English PDF |
| GB/T 4701.12-2024 |
Ferrotitanium - Determination of titanium content - Diantipyryl metHane spectrophotometry {译} 钛铁-钛含量的测定-二安替吡啉甲烷分光光度法 |
China National Standards Han |
English PDF |
| GB/T 23561.8-2024 |
Methods for determination of physical and mecHanical properties of coal and rock - Part 8: Methods for determination of deformation parameters of coal and rock {译} 煤和岩石物理力学性质测定方法-第8部分：煤和岩石变形参数测定方法 |
China National Standards Han |
English PDF |
| GB/T 43791-2024 |
International trade business process specification - data pipeline carrier - data excHange architecture {译} 国际贸易业务流程规范-数据管道载体-数据交换架构 |
China National Standards Han |
English PDF |
| GB/T 22076-2024 |
Pneumatics - Cylindrical quick-cHange connectors {译} 气动-圆柱形快换接头 |
China National Standards Han |
English PDF |
| GB/T 15843.4-2024 |
Information technology - Security technology - Entity authentication - Part 4: MecHanisms using cryptographic check functions {译} 信息技术-安全技术-实体鉴别-第4部分：采用密码校验函数的机制 |
China National Standards Han |
English PDF |
| GB/T 17903.3-2024 |
Information technology - Security technology - Non-repudiation - Part 3: MecHanisms using asymmetric technology {译} 信息技术-安全技术-抗抵赖-第3部分：采用非对称技术的机制 |
China National Standards Han |
English PDF |
| GB/T 20042.6-2024 |
Proton excHange membrane fuel cells - Part 6 ：Test methods for bipolar plate characteristics {译} 质子交换膜燃料电池-第6部分：双极板特性测试方法 |
China National Standards Han |
English PDF |
| GB/T 23751.3-2024 |
Micro fuel cell power generation systems - Part 3: IntercHangeability of fuel containers {译} 微型燃料电池发电系统-第3部分：燃料容器互换性 |
China National Standards Han |
English PDF |
| GB/T 43828.1-2024 |
Printing technology - Prepress data excHange - Color scale for input scanner calibration - Part 1: Color scale for input scanner calibration {译} 印刷技术-印前数据交换-输入扫描仪校准用色标-第1部分：输入扫描仪校准用色标 |
China National Standards Han |
English PDF |
| GB/T 43835-2024 |
Printing technology - Prepress data excHange - Preparation and visualization of RGB images for use in RGB-based printing workflows {译} 印刷技术-印前数据交换-基于RGB印刷工作流程中使用RGB图像的准备和可视化 |
China National Standards Han |
English PDF |
| GB/T 18721.5-2024 |
Printing technology - Prepress data excHange - Part 5: Scene-related standard colour image data - (RIMM/SCID) {译} 印刷技术-印前数据交换-第5部分：场景相关的标准彩色图像数据-（RIMM/SCID） |
China National Standards Han |
English PDF |
| GB/T 43657.3-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 3: Container Handlers {译} 工业车辆能效-试验方法-第3部分：集装箱搬运车 |
China National Standards Han |
English PDF |
| GB/T 43718-2024 |
Hand sanitizer {译} 免洗洗手液 |
China National Standards Han |
English PDF |
| GB/T 18721.3-2024 |
Printing technology - prepress data excHange - Part 3: - CIELAB standard color image data (CIELAB/SCID) {译} 印刷技术-印前数据交换-第3部分：-CIELAB标准彩色图像数据（CIELAB/SCID） |
China National Standards Han |
English PDF |
| GB/T 18721.4-2024 |
Printing technology - prepress data excHange - Part 4: Wide color gamut standard color image data for display - [Adobe-RGB- (1998) / SCID] {译} 印刷技术-印前数据交换-第4部分：显示用宽色域标准彩色图像数据-[Adobe-RGB-（1998）/SCID] |
China National Standards Han |
English PDF |
| GB/Z 43728.200-2024 |
Power system management and information excHange-Part 1 : Reference architecture {译} 电力系统管理及其信息交换-第200部分：从互联网协议版本4-（IPv4）-到互联网协议版本6-（IPv6）-的迁移指南 |
China National Standards Han |
English PDF |
| GB/T 15153.1-2024 |
Power system management and information excHange-Part 200: Migration guide from Internet Protocol version 4-(IPv4)-to Internet Protocol version 6-(IPv6)- {译} 远动设备及系统-第2部分：工作条件-第1篇：电源和电磁兼容性 |
China National Standards Han |
English PDF |
| GB/T 1504-2024 |
Information technology-Remote communication and information excHange between systems-Visual networking system requirements {译} 铸铁轧辊 |
China National Standards Han |
English PDF |
| GB/T 43654-2024 |
Determination of styrene and 2-chloroetHanol in cell culture medium-Gas chromatography-mass spectrometry (GC-MS) method {译} 智能化立磨粉磨系统-技术要求 |
China National Standards Han |
English PDF |
| GB/T 43880.1-2024 |
General requirements for logistics drone cargo Hanging control {译} 服务型制造-导则-第1部分：体系架构 |
China National Standards Han |
English PDF |
| GB/T 43742-2024 |
Methods for testing the mecHanical strength of magnetic cores made of magnetic oxides {译} 工业园区水回用指南 |
China National Standards Han |
English PDF |
| GB/Z 29014.5-2024 |
Cutting tool data representation and excHange-Part 100: Reference dictionary Definitions, principles and methods of the Code {译} 切削刀具数据表达与交换-第5部分：装配项目参考字典 |
China National Standards Han |
English PDF |
| GB/Z 29014.4-2024 |
Cutting tool data representation and excHange-Part 5: Reference dictionary for assembly items {译} 切削刀具数据表达与交换-第4部分：适应项目参考字典 |
China National Standards Han |
English PDF |
| GB/Z 29014.2-2024 |
Cutting tool data representation and excHange-Part 4: Reference dictionary for adaptation items {译} 切削刀具数据表达与交换-第2部分：切削项目参考字典 |
China National Standards Han |
English PDF |
| GB/T 20936.2-2024 |
Cutting tool data representation and excHange-Part 2: Reference dictionary for cutting items {译} 爆炸性环境用气体探测器-第2部分：可燃气体和氧气探测器的选型、安装、使用和维护 |
China National Standards Han |
English PDF |
| GB/T 19518.1-2024 |
Cutting tool data representation and excHange-Part 1: Overview, basic principles and general information model {译} 爆炸性环境-电阻式伴热器-第1部分：通用和试验要求 |
China National Standards Han |
English PDF |
| GB/T 43712-2024 |
Textiles-Textiles containing phase cHange materials-Determination of heat storage and heat release properties {译} 基本公共服务标准实施评估指南 |
China National Standards Han |
English PDF |
| GB/T 21711.2-2024 |
Basic electromecHanical relays-Part 2-1: Reliability-B10 value verification procedure {译} 基础机电继电器-第2部分：可靠性 |
China National Standards Han |
English PDF |
| GB/T 14799-2024 |
Basic electromecHanical relays-Part 2: Reliability {译} 土工合成材料-有效孔径的测定-干筛法 |
China National Standards Han |
English PDF |
| GB/T 4937.35-2024 |
Semiconductor devices - MecHanical and climatic test methods - Part 35: Acoustic microscopy of plastic encapsulated electronic components {译} 半导体器件-机械和气候试验方法-第35部分：塑封电子元器件的声学显微镜检查 |
China National Standards Han |
English PDF |
| GB/T 4937.34-2024 |
Semiconductor devices - MecHanical and climatic test methods - Part 34: Power cycling {译} 半导体器件-机械和气候试验方法-第34部分：功率循环 |
China National Standards Han |
English PDF |
| GB/T 31960.13-2024 |
Technical specifications for power energy efficiency monitoring systems - Part 13: Technical specifications for on-site Handheld devices {译} 电力能效监测系统技术规范-第13部分：现场手持设备技术规范 |
China National Standards Han |
English PDF |
| GB/T 43626-2023 |
Safety regulations for semi-integrated LED lamps with power supply voltage not greater tHan AC rms 50V or ripple-free DC 120V for general lighting {译} 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯 安全规范 |
China National Standards Han |
English PDF |
| GB/T 43599-2023 |
Oil and gas drilling equipment testing and evaluation of mecHanical cementing plugs {译} 石油天然气钻采设备 机械式固井胶塞的测试与评价 |
China National Standards Han |
English PDF |
| GB/T 43568-2023 |
Standards for Handling Insurance Consumer Complaints {译} 保险消费投诉处理规范 |
China National Standards Han |
English PDF |
| GB/T 43550.2-2023 |
MecHanical pencils and lead for general use - Classification, dimensions, quality and test methods - Part 2: Black lead {译} 一般用途活动铅笔和铅芯 分类、尺寸、质量和试验方法 第2部分：黑铅芯 |
China National Standards Han |
English PDF |
| GB/T 43550.1-2023 |
MecHanical pencils and lead for general use - Classification, dimensions, quality and test methods - Part 1: Mechanical pencils {译} 一般用途活动铅笔和铅芯 分类、尺寸、质量和试验方法 第1部分：活动铅笔 |
China National Standards Han |
English PDF |
| GB/T 43458-2023 |
Second-Hand goods export trade {译} 二手货出口贸易 |
China National Standards Han |
English PDF |
| GB/T 30422-2023 |
Electrodeless fluorescent lamps (other tHan self-ballasted lamps) Safety regulations {译} 无极荧光灯（自镇流灯除外） 安全规范 |
China National Standards Han |
English PDF |
| GB/T 30330-2023 |
China Publications Online Information ExcHange Book Product Information Format {译} 中国出版物在线信息交换 图书产品信息格式 |
China National Standards Han |
English PDF |
| GB/T 25320.11-2023 |
Power system management and its information excHange Data and communication security Part 11: Security of XML files {译} 电力系统管理及其信息交换 数据和通信安全 第11部分：XML文件的安全 |
China National Standards Han |
English PDF |
| GB/T 25320.6-2023 |
Power system management and its information excHange Data and communication security Part 6: Security of IEC 61850 {译} 电力系统管理及其信息交换 数据和通信安全 第6部分：IEC 61850的安全 |
China National Standards Han |
English PDF |
| GB/T 20818.22-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 22: List of properties (LOPs) for electronic data excHange of valve body assemblies {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第22部分：阀体总成电子数据交换用属性列表(LOPs) |
China National Standards Han |
English PDF |
| GB/T 20818.16-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 16: List of properties (LOPs) for electronic data excHange of density measuring equipment {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第16部分：密度测量设备电子数据交换用属性列表(LOPs) |
China National Standards Han |
English PDF |
| GB/T 20064.1-2023 |
Reciprocating internal combustion engines - Handle starters - Part 1: Safety requirements and tests {译} 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 |
China National Standards Han |
English PDF |
| GB/T 19652-2023 |
Discharge lamps (other tHan fluorescent lamps) Safety regulations {译} 放电灯（荧光灯除外） 安全规范 |
China National Standards Han |
English PDF |
| GB/T 19510.212-2023 |
Light source control devices Part 2-12: Special requirements for DC or AC electronic ballasts for discharge lamps (other tHan fluorescent lamps) {译} 光源控制装置 第2-12部分：放电灯（荧光灯除外）用直流或交流电子镇流器的特殊要求 |
China National Standards Han |
English PDF |
| GB/T 19510.209-2023 |
Light source control devices Part 2-9: Special requirements for electromagnetic control devices for discharge lamps (other tHan fluorescent lamps) {译} 光源控制装置 第2-9部分：放电灯（荧光灯除外）用电磁控制装置的特殊要求 |
China National Standards Han |
English PDF |
| GB/T 19510.201-2023 |
Light source control devices Part 2-1: Special requirements for starting devices (other tHan glow starters) {译} 光源控制装置 第2-1部分: 启动装置(辉光启动器除外)的特殊要求 |
China National Standards Han |
English PDF |
| GB/T 17359-2023 |
Microbeam analysis Quantitative analysis of elements with atomic number not less tHan 11 by energy spectrometry {译} 微束分析 原子序数不小于11的元素能谱法定量分析 |
China National Standards Han |
English PDF |
| GB/T 10739-2023 |
Paper, paperboard and pulp Standard atmospheric conditions for specimen Handling and testing {译} 纸、纸板和纸浆 试样处理和试验的标准大气条件 |
China National Standards Han |
English PDF |
| GB/Z 25320.1003-2023 |
Power system management and its information excHange Data and communication security Part 100-3: Conformance test cases for IEC 62351-3 and secure communication extensions including the TCP/IP protocol suite {译} 电力系统管理及其信息交换 数据和通信安全 第100-3部分：IEC 62351-3的一致性测试用例和包括TCP/IP协议集的安全通信扩展 |
China National Standards Han |
English PDF |
| GB/Z 25320.1001-2023 |
Power system management and its information excHange Data and communication security Part 100-1: Conformance test cases for IEC 62351-5 and IEC TS 60870-5-7 {译} 电力系统管理及其信息交换 数据和通信安全 第100-1部分：IEC 62351-5和IEC TS 60870-5-7的一致性测试用例 |
China National Standards Han |
English PDF |
| GB/T 7408.1-2023 |
Date and time information excHange representation Part 1: Basic principles {译} 日期和时间 信息交换表示法 第1部分：基本原则 |
China National Standards Han |
English PDF |
| GB 28881-2023 |
Hand protection Chemical and microbiological protective gloves {译} 手部防护 化学品及微生物防护手套 |
China National Standards Han |
English PDF |
| GB 29436-2023 |
Energy consumption limit per unit product for metHanol, ethylene glycol and dimethyl ether {译} 甲醇、乙二醇和二甲醚单位产品能源消耗限额 |
China National Standards Han |
English PDF |
| GB/T 43379-2023 |
Space data and information transmission system XML-based telemetry and remote control information excHange specification {译} 空间数据与信息传输系统 基于XML的遥测遥控信息交换规范 |
China National Standards Han |
English PDF |
| GB/T 3654.8-2023 |
Ferroniobium Determination of titanium content Chromotropic acid photometry and diantipyrine metHane photometry {译} 铌铁 钛含量的测定 变色酸光度法和二安替比林甲烷光度法 |
China National Standards Han |
English PDF |
| GB/T 18115.6-2023 |
Methods for chemical analysis of rare earth impurities in rare earth metals and their oxides - Part 6: Determination of the amounts of lantHanum, cerium, praseodymium, neodymium, samarium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttrium in europium {译} 稀土金属及其氧化物中稀土杂质化学分析方法 第6部分：铕中镧、铈、镨、钕、钐、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定 |
China National Standards Han |
English PDF |
| GB/T 43361-2023 |
Gas Analysis Validation of Hydrogen Fuel Analysis Methods for Proton ExcHange Membrane Fuel Cells for Road Vehicles {译} 气体分析 道路车辆用质子交换膜燃料电池氢燃料分析方法的确认 |
China National Standards Han |
English PDF |
| GB/T 13296-2023 |
Stainless steel seamless steel pipes for boilers and heat excHangers {译} 锅炉、热交换器用不锈钢无缝钢管 |
China National Standards Han |
English PDF |
| GB/T 32800.9-2023 |
Safety requirements for Hand-held non-electric power tools Part 9: Grinder for molds {译} 手持式非电类动力工具 安全要求 第9部分：模具用砂轮机 |
China National Standards Han |
English PDF |
| GB/T 32800.8-2023 |
Hand-held non-electric power tools Safety requirements Part 8: Grinders and polishers {译} 手持式非电类动力工具 安全要求 第8部分：磨光机和抛光机 |
China National Standards Han |
English PDF |
| GB/T 32800.6-2023 |
Hand-held non-electric power tools Safety requirements Part 6: Assembly power tools for threaded fasteners {译} 手持式非电类动力工具 安全要求 第6部分：螺纹紧固件用装配动力工具 |
China National Standards Han |
English PDF |
| GB/T 32800.5-2023 |
Safety requirements for Hand-held non-electric power tools Part 5: Rotary impact drilling tools {译} 手持式非电类动力工具 安全要求 第5部分：回转冲击式钻孔工具 |
China National Standards Han |
English PDF |
| GB/T 43406-2023 |
Liquid cargo Handling equipment, crude oil export system, tandem mooring winch {译} 液货装卸设备 原油外输系统 串靠系泊绞车 |
China National Standards Han |
English PDF |
| GB/T 43402-2023 |
Passenger car driver's Hand control area {译} 乘用车 驾驶员手控制区域 |
China National Standards Han |
English PDF |
| GB/T 43400-2023 |
Road vehicles Trailers below 3.5t Calculation of mecHanical strength of steel drawbars {译} 道路车辆 3.5t以下挂车 钢制牵引杆机械强度计算 |
China National Standards Han |
English PDF |
| GB/T 43382-2023 |
Normal direction of movement of Hand controls on road vehicles {译} 道路车辆手控装置常规运动方向 |
China National Standards Han |
English PDF |
| GB/T 17867-2023 |
Location of automobile Hand controls, indicators and signaling devices {译} 汽车手操纵件、指示器及信号装置的位置 |
China National Standards Han |
English PDF |
| GB/T 10894-2023 |
Separation mecHanical noise test method {译} 分离机械噪声测试方法 |
China National Standards Han |
English PDF |
| GB/T 25774.2-2023 |
Inspection of welding materials Part 2: Preparation of mecHanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel {译} 焊接材料的检验 第2部分：钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备 |
China National Standards Han |
English PDF |
| GB/T 25774.1-2023 |
Examination of welding materials Part 1: Preparation of mecHanical properties specimens of steel, nickel and nickel alloy deposited metals {译} 焊接材料的检验 第1部分： 钢、镍及镍合金熔敷金属力学性能试样的制备 |
China National Standards Han |
English PDF |
| GB/T 19494.3-2023 |
MecHanized sampling of coal Part 3: Determination of precision and bias testing {译} 煤炭机械化采样 第3部分：精密度测定和偏倚试验 |
China National Standards Han |
English PDF |
| GB/T 19494.2-2023 |
MecHanized sampling of coal Part 2: Preparation of coal samples {译} 煤炭机械化采样 第2部分：煤样的制备 |
China National Standards Han |
English PDF |
| GB/T 19494.1-2023 |
MecHanized sampling of coal Part 1: Sampling methods {译} 煤炭机械化采样 第1部分：采样方法 |
China National Standards Han |
English PDF |
| GB/T 13871.3-2023 |
Lip seals for rotating shafts with elastomeric sealing elements - Part 3: Storage, Handling and installation {译} 密封元件为弹性体材料的旋转轴唇形密封圈 第3部分：贮存、搬运和安装 |
China National Standards Han |
English PDF |
| GB/T 19520.22-2023 |
MecHanical structures of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-110: Residential racks and cabinets for smart homes {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-110部分：智慧房屋用住宅机架和机柜 |
China National Standards Han |
English PDF |
| GB/T 19520.21-2023 |
MecHanical Structure of Electrical and Electronic Equipment 482.6 mm (19 in) Series Mechanical Structure Dimensions Part 3-109: Chassis Dimensions of Embedded Computing Devices {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-109部分：嵌入式计算设备的机箱尺寸 |
China National Standards Han |
English PDF |
| GB/T 19520.20-2023 |
MecHanical structure of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-108: Dimensions of R-type sub-boxes and plug-ins {译} 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-108部分：R型插箱和插件的尺寸 |
China National Standards Han |
English PDF |
| GB/T 42918.2-2023 |
Plastics - Thermoplastic polyuretHanes for molding and extrusion - Part 2: Specimen preparation and property determination {译} 塑料 模塑和挤出用热塑性聚氨酯 第2部分：试样制备和性能测定 |
China National Standards Han |
English PDF |
| GB/T 17273-2023 |
Container Equipment Data ExcHange General Communication Code {译} 集装箱 设备数据交换 一般通信代码 |
China National Standards Han |
English PDF |
| GB 5009.294-2023 |
National food safety standards Determination of tryptopHan in food {译} 食品安全国家标准 食品中色氨酸的测定 |
China National Standards Han |
English PDF |
| GB 1903.59-2023 |
National Food Safety Standard Food Nutritional EnHancer Chromium Chloride {译} 食品安全国家标准 食品营养强化剂 氯化铬 |
China National Standards Han |
English PDF |
| GB 1903.60-2023 |
National Food Safety Standard Food Nutritional EnHancer L-Carnitine Tartrate {译} 食品安全国家标准 食品营养强化剂 L-肉碱酒石酸盐 |
China National Standards Han |
English PDF |
| GB 1903.62-2023 |
National Food Safety Standards Food Nutritional EnHancers Reduced Iron {译} 食品安全国家标准 食品营养强化剂 还原铁 |
China National Standards Han |
English PDF |
| GB 1903.63-2023 |
National Food Safety Standard Food Nutritional EnHancer Calcium Glycerophosphate {译} 食品安全国家标准 食品营养强化剂 甘油磷酸钙 |
China National Standards Han |
English PDF |
| GB 5009.225-2023 |
National food safety standards Determination of etHanol concentration in wine and edible alcohol {译} 食品安全国家标准 酒和食用酒精中乙醇浓度的测定 |
China National Standards Han |
English PDF |
| GB 1903.64-2023 |
National Food Safety Standard Food Nutritional EnHancer Manganese Chloride {译} 食品安全国家标准 食品营养强化剂 氯化锰 |
China National Standards Han |
English PDF |
| GB 1903.61-2023 |
National Food Safety Standard Food Nutritional EnHancer Copper Carbonate {译} 食品安全国家标准 食品营养强化剂 碳酸铜 |
China National Standards Han |
English PDF |
| GB 1886.365-2023 |
National Food Safety Standard Food Additive 5-Methyl-2-furanmetHanethiol {译} 食品安全国家标准 食品添加剂 5-甲基-2-呋喃甲硫醇 |
China National Standards Han |
English PDF |
| GB 1903.40-2022 |
National Food Safety Standard Nutritional EnHancer Fructooligosaccharide {译} 食品安全国家标准 营养强化剂 低聚果糖 |
China National Standards Han |
English PDF |
| GB 1903.58-2022 |
National Food Safety Standard Food Nutritional EnHancer Manganese Carbonate {译} 食品安全国家标准 食品营养强化剂 碳酸锰 |
China National Standards Han |
English PDF |
| GB 1903.33-2022 |
National Food Safety Standard Food Nutritional EnHancer 5’-Cytidine Monophosphate {译} 食品安全国家标准 食品营养强化剂 5’-单磷酸胞苷 |
China National Standards Han |
English PDF |
| GB 1903.27-2022 |
National Food Safety Standard Food Nutritional EnHancer Galacto-oligosaccharide {译} 食品安全国家标准 食品营养强化剂 低聚半乳糖 |
China National Standards Han |
English PDF |
| GB 1903.30-2022 |
National Food Safety Standard Nutritional EnHancer Polyfructose {译} 食品安全国家标准 营养强化剂 多聚果糖 |
China National Standards Han |
English PDF |
| GB 1903.26-2022 |
National Food Safety Standard Food Nutritional EnHancer Docosahexaenoic Acid Oil (Tuna Oil) {译} 食品安全国家标准 食品营养强化剂 二十二碳六烯酸油脂（金枪鱼油） |
China National Standards Han |
English PDF |
| GB 1903.57-2022 |
National Food Safety Standard Food Nutritional EnHancer Manganese Citrate {译} 食品安全国家标准 食品营养强化剂 柠檬酸锰 |
China National Standards Han |
English PDF |
| GB 1903.56-2022 |
National Food Safety Standard Food Nutritional EnHancer Sodium Selenate {译} 食品安全国家标准 食品营养强化剂 硒酸钠 |
China National Standards Han |
English PDF |
| GB 1903.55-2022 |
National Food Safety Standard Food Nutritional EnHancer L-Potassium Ascorbate {译} 食品安全国家标准 食品营养强化剂 L-抗坏血酸钾 |
China National Standards Han |
English PDF |
| GB 1903.54-2021 |
National Food Safety Standard Food Nutritional EnHancer Choline Bitartrate {译} 食品安全国家标准 食品营养强化剂 酒石酸氢胆碱 |
China National Standards Han |
English PDF |
| GB 1903.53-2021 |
National Food Safety Standard Food Nutritional EnHancer D-Calcium Pantothenate {译} 食品安全国家标准 食品营养强化剂 D-泛酸钙 |
China National Standards Han |
English PDF |
| GB/T 7190.3-2019 |
MecHanical draft cooling tower Part 3: Closed cooling tower "Modification No. 1" {译} 机械通风冷却塔 第3部分：闭式冷却塔《第1号修改单》 |
China National Standards Han |
English PDF |
| GB/T 4937.26-2023 |
Semiconductor devices - MecHanical and climatic test methods - Part 26: Electrostatic discharge (ESD) susceptibility testing Human Body Model (HBM) {译} 半导体器件 机械和气候试验方法 第26部分：静电放电（ESD）敏感度测试 人体模型（HBM） |
China National Standards Han |
English PDF |
| GB/T 43245-2023 |
Smart City Infrastructure Data ExcHange and Sharing Guide {译} 智慧城市基础设施 数据交换与共享指南 |
China National Standards Han |
English PDF |
| GB/T 43219-2023 |
Inspection Guidelines for Mobile Coal Stream MecHanized Sampling System {译} 移动煤流机械化采样系统检查导则 |
China National Standards Han |
English PDF |
| GB/T 43211-2023 |
Test Method for Particle Size Determination of Softwood Pellets by MecHanical Sieving {译} 软木粒机械筛分测定粒度的试验方法 |
China National Standards Han |
English PDF |
| GB/T 43201.5-2023 |
Industrial Automation Systems and Integration Standardized Procedures for Production Systems Engineering Part 5: Manufacturing CHange Management {译} 工业自动化系统与集成 生产系统工程的标准化程序 第5部分：制造变更管理 |
China National Standards Han |
English PDF |
| GB/T 43192.1-2023 |
Road vehicles - Digital information excHange for electrical connections between tractors and trailers - Part 1: Physical layer and data link layer {译} 道路车辆 牵引车和挂车电气连接的数字信息交互 第1部分:物理层和数据链路层 |
China National Standards Han |
English PDF |
| GB/T 43135-2023 |
Earthmoving Machinery Tire Handlers Terminology and Commercial Specifications {译} 土方机械 轮胎式叉装机 术语和商业规格 |
China National Standards Han |
English PDF |
| GB/T 43128-2023 |
General technical specifications for aerospace thermoplastic polyuretHane elastomer interlayer films {译} 航空航天热塑性聚氨酯弹性体中间膜通用技术规范 |
China National Standards Han |
English PDF |
| GB/T 43057-2023 |
Photovoltaic module dynamic mecHanical load test {译} 光伏组件 动态机械载荷试验 |
China National Standards Han |
English PDF |
| GB/T 43052-2023 |
Specification for information excHange between electricity market transaction operation system and electricity sales technical support system {译} 电力市场交易运营系统与售电技术支持系统信息交换规范 |
China National Standards Han |
English PDF |
| GB/T 42381.140-2023 |
Data Quality Part 140: Master Data: Characteristic Data ExcHange: Integrity {译} 数据质量 第140部分：主数据：特征数据交换：完整性 |
China National Standards Han |
English PDF |
| GB/T 42381.130-2023 |
Data Quality Part 130: Master Data: Characteristic Data ExcHange: Accuracy {译} 数据质量 第130部分：主数据：特征数据交换：准确性 |
China National Standards Han |
English PDF |
| GB/T 42381.120-2023 |
Data Quality Part 120: Master Data: Characteristic Data ExcHange: Traceability {译} 数据质量 第120部分：主数据：特征数据交换：溯源性 |
China National Standards Han |
English PDF |
| GB/T 39003.3-2023 |
Engineering data excHange format for industrial automation systems engineering Automation markup language Part 3: Geometry and kinematics {译} 工业自动化系统工程用工程数据交换格式 自动化标记语言 第3部分：几何学和运动学 |
China National Standards Han |
English PDF |
| GB/T 39003.2-2023 |
Engineering data excHange format for industrial automation system engineering Automation markup language Part 2: Semantics library {译} 工业自动化系统工程用工程数据交换格式 自动化标记语言 第2部分：语义学库 |
China National Standards Han |
English PDF |
| GB/T 3883.402-2023 |
Safety of Hand-held and portable power tools and garden tools Part 402: Particular requirements for pruning shears {译} 手持式、可移式电动工具和园林工具的安全 第402部分：修枝剪的专用要求 |
China National Standards Han |
English PDF |
| GB/T 3883.401-2023 |
Safety of Hand-held and portable power tools and garden tools Part 401: Specific requirements for chain saws {译} 手持式、可移式电动工具和园林工具的安全 第401部分：链锯的专用要求 |
China National Standards Han |
English PDF |
| GB/T 3883.217-2023 |
Safety of Hand-held and portable power tools and garden tools Part 217: Particular requirements for hand-held wood milling tools {译} 手持式、可移式电动工具和园林工具的安全 第217部分：手持式木铣的专用要求 |
China National Standards Han |
English PDF |
| GB/T 3883.208-2023 |
Safety of Hand-held and portable power tools and garden tools Part 208: Particular requirements for hand-held electric scissors and electric punching shears {译} 手持式、可移式电动工具和园林工具的安全 第208部分：手持式电剪刀和电冲剪的专用要求 |
China National Standards Han |
English PDF |
| GB/T 29465-2023 |
Flange for floating head heat excHanger {译} 浮头式热交换器用法兰 |
China National Standards Han |
English PDF |
| GB/T 29463-2023 |
Gaskets for shell and tube heat excHangers {译} 管壳式热交换器用垫片 |
China National Standards Han |
English PDF |
| GB/T 28713-2023 |
EnHanced heat transfer tubes for heat exchangers {译} 热交换器用强化传热管 |
China National Standards Han |
English PDF |
| GB/T 28712.3-2023 |
Heat excHanger types and basic parameters Part 3: U-shaped tube heat exchanger {译} 热交换器型式与基本参数 第3部分：U形管式热交换器 |
China National Standards Han |
English PDF |
| GB/T 28712.2-2023 |
Heat excHanger types and basic parameters Part 2: Fixed tube plate heat exchanger {译} 热交换器型式与基本参数 第2部分：固定管板式热交换器 |
China National Standards Han |
English PDF |
| GB/T 28712.1-2023 |
Heat excHanger types and basic parameters Part 1: Floating head heat exchanger {译} 热交换器型式与基本参数 第1部分：浮头式热交换器 |
China National Standards Han |
English PDF |
| GB/T 27698.3-2023 |
Performance test methods for heat excHangers and heat transfer elements Part 3: Heat transfer elements {译} 热交换器及传热元件性能测试方法 第3部分：传热元件 |
China National Standards Han |
English PDF |
| GB/T 26949.21-2023 |
Industrial vehicle stability verification Part 21: Picking vehicles with operator position lifting height greater tHan 1 200 mm {译} 工业车辆 稳定性验证 第21部分：操作者位置起升高度大于1 200 mm的拣选车 |
China National Standards Han |
English PDF |
| GB/T 22789.2-2023 |
Plastic products Rigid polyvinyl chloride sheets (sheets) Part 2: Classification, size and properties of sheets with thickness less tHan 1mm {译} 塑料制品 硬质聚氯乙烯板（片）材 第2部分：厚度1mm以下片材的分类、尺寸和性能 |
China National Standards Han |
English PDF |
| GB/T 223.92-2023 |
Steel and alloys - Determination of lantHanum, cerium, praseodymium, neodymium and samarium content - Inductively coupled plasma mass spectrometry {译} 钢铁及合金 镧、铈、镨、钕、钐含量的测定 电感耦合等离子体质谱法 |
China National Standards Han |
English PDF |
| GB/T 18950-2023 |
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of cHanges in color, appearance and other physical properties. {译} 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 |
China National Standards Han |
English PDF |
| GB/T 16656.52-2023 |
Industrial Automation Systems and Integration Product Data Representation and ExcHange Part 52: Integrating Common Resources: Grid-Based Topology {译} 工业自动化系统与集成 产品数据表达与交换 第52部分：集成通用资源：基于网格的拓扑结构 |
China National Standards Han |
English PDF |
| GB/T 16656.22-2023 |
Industrial Automation Systems and Integration Product Data Expression and ExcHange Part 22: Implementation Method: Standard Data Access Interface {译} 工业自动化系统与集成 产品数据表达与交换 第22部分：实现方法：标准数据访问接口 |
China National Standards Han |
English PDF |
| GB/T 1458-2023 |
Test method for mecHanical properties of fiber-wound reinforced composite ring specimens {译} 纤维缠绕增强复合材料环形试样力学性能试验方法 |
China National Standards Han |
English PDF |
| GB/T 12598-2023 |
Plastics Ion excHange resin Determination of sphericity rate after grinding and sphericity rate after grinding {译} 塑料 离子交换树脂 渗磨圆球率和磨后圆球率的测定 |
China National Standards Han |
English PDF |
| GB/T 10802-2023 |
General purpose flexible polyuretHane foam {译} 通用软质聚氨酯泡沫塑料 |
China National Standards Han |
English PDF |
| GB/T 10357.5-2023 |
Furniture mecHanical properties test Part 5: Cabinet strength and durability {译} 家具力学性能试验 第5部分：柜类强度和耐久性 |
China National Standards Han |
English PDF |
| GB/T 10357.4-2023 |
Furniture mecHanical properties test Part 4: Cabinet stability {译} 家具力学性能试验 第4部分：柜类稳定性 |
China National Standards Han |
English PDF |
| GB/T 42709.19-2023 |
Semiconductor devices Microelectronic mecHanical devices Part 19: Electronic compass {译} 半导体器件 微电子机械器件 第19部分：电子罗盘 |
China National Standards Han |
English PDF |
| GB/T 42842.2-2023 |
Microbubble Technology Cleaning Applications Part 2: Test methods for cleaning mecHanical oil stains on the surface of machined metal parts {译} 微细气泡技术 清洗应用 第2部分： 机加工金属零件表面机械油污清洗的试验方法 |
China National Standards Han |
English PDF |
| GB/T 42961-2023 |
Climate cHange impact assessment method for vegetation ecological quality {译} 植被生态质量的气候变化影响评价方法 |
China National Standards Han |
English PDF |
| GB/T 42937-2023 |
Specifications for information excHange on express high-speed rail transportation {译} 快件高铁运输信息交换规范 |
China National Standards Han |
English PDF |
| GB/T 42847.2-2023 |
Reversible mode fuel cell module for energy storage systems Part 2: Performance testing method of reversible mode proton excHange membrane cell and stack {译} 储能系统用可逆模式燃料电池模块 第2部分：可逆模式质子交换膜单池与电堆性能测试方法 |
China National Standards Han |
English PDF |
| GB/T 42897-2023 |
MicroelectromecHanical systems (MEMS) technology Silicon-based MEMS nano-thickness film tensile strength test method {译} 微机电系统（MEMS）技术 硅基MEMS纳米厚度膜抗拉强度试验方法 |
China National Standards Han |
English PDF |
| GB/T 42896-2023 |
MicroelectromecHanical systems (MEMS) technology Silicon-based MEMS nanoscale structure impact test method {译} 微机电系统（MEMS）技术 硅基MEMS纳尺度结构冲击试验方法 |
China National Standards Han |
English PDF |
| GB/T 42895-2023 |
MicroelectromecHanical systems (MEMS) technology Silicon-based MEMS microstructure bending strength test method {译} 微机电系统（MEMS）技术 硅基MEMS微结构弯曲强度试验方法 |
China National Standards Han |
English PDF |
| GB/T 28712.6-2023 |
Heat excHanger types and basic parameters Part 6: Air-cooled heat exchanger {译} 热交换器型式与基本参数 第6部分：空冷式热交换器 |
China National Standards Han |
English PDF |
| GB/T 28712.5-2023 |
Heat excHanger types and basic parameters Part 5: Spiral plate heat exchanger {译} 热交换器型式与基本参数 第5部分：螺旋板式热交换器 |
China National Standards Han |
English PDF |
| GB/T 28712.4-2023 |
Heat excHanger types and basic parameters Part 4: Thermosiphon reboiler {译} 热交换器型式与基本参数 第4部分：热虹吸式重沸器 |
China National Standards Han |
English PDF |
| GB/T 27698.2-2023 |
Performance test methods for heat excHangers and heat transfer elements Part 2: Heat exchangers {译} 热交换器及传热元件性能测试方法 第2部分：热交换器 |
China National Standards Han |
English PDF |
| GB/T 17928-2023 |
Leather - Physical and mecHanical tests - Determination of pinhole tear strength {译} 皮革 物理和机械试验 针孔撕裂强度的测定 |
China National Standards Han |
English PDF |
| GB/T 22638.11-2023 |
Test methods for aluminum foil Part 11: Testing of mecHanical properties {译} 铝箔试验方法 第11部分：力学性能的测试 |
China National Standards Han |
English PDF |
| GB/T 15677-2023 |
Metal lantHanum and lanthanum powder {译} 金属镧及镧粉 |
China National Standards Han |
English PDF |
| GB/T 42901-2023 |
Test methods for mecHanical connectors of steel bars {译} 钢筋机械连接件试验方法 |
China National Standards Han |
English PDF |
| GB/T 42796-2023 |
Steel mecHanical connectors {译} 钢筋机械连接件 |
China National Standards Han |
English PDF |
| GB/T 42430-2023 |
Testing of etHanol, methanol, n-propanol, acetone, isopropanol and n-butanol in blood and urine {译} 血液、尿液中乙醇、甲醇、正丙醇、丙酮、异丙醇和正丁醇检验 |
China National Standards Han |
English PDF |
| GB/T 24437-2023 |
Classification and evaluation of prosthetic and orthotic configuration mecHanisms {译} 假肢、矫形器配置机构的等级划分与评定 |
China National Standards Han |
English PDF |
| GB/T 42869-2023 |
Requirements for simplification and lightweighting of three-dimensional models of mecHanical products {译} 机械产品三维模型简化与轻量化要求 |
China National Standards Han |
English PDF |
| GB/T 20818.15-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 15: List of properties (LOPs) for electronic data excHange of level measuring equipment {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第15部分：物位测量设备电子数据交换用属性列表(LOPs) |
China National Standards Han |
English PDF |
| GB/T 20818.14-2023 |
Industrial process measurement and control - Data structures and elements in process equipment catalogs - Part 14: List of properties (LOP) for electronic data excHange of temperature measuring equipment {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第14部分：温度测量设备电子数据交换用属性列表(LOP) |
China National Standards Han |
English PDF |
| GB/T 20818.13-2023 |
Industrial process measurement and control. Data structures and elements in process equipment catalogs. Part 13: List of properties (LOP) for electronic data excHange of pressure measuring equipment. {译} 工业过程测量和控制 过程设备目录中的数据结构和元素 第13部分：压力测量设备电子数据交换用属性列表（LOP） |
China National Standards Han |
English PDF |
| GB/T 678-2023 |
Chemical reagent etHanol (anhydrous ethanol) {译} 化学试剂 乙醇（无水乙醇） |
China National Standards Han |
English PDF |
| GB/T 42658.4-2023 |
Surface Chemical Analysis Sample Handling, Preparation and Setup Guide Part 4: Reporting information on the origin, preparation, handling and set-up of nanoobjects prior to surface analysis {译} 表面化学分析 样品处理、制备和安装指南 第4部分: 报告表面分析前纳米物体相关的来历、制备、处理和安装信息 |
China National Standards Han |
English PDF |
| GB/T 20138-2023 |
Protection level of electrical equipment enclosures against external mecHanical impact (IK code) {译} 电器设备外壳对外界机械碰撞的防护等级（IK代码） |
China National Standards Han |
English PDF |
| GB/T 42918.1-2023 |
Plastics - Thermoplastic polyuretHanes for molding and extrusion - Part 1: Nomenclature system and basis for classification {译} 塑料 模塑和挤出用热塑性聚氨酯 第1部分：命名系统和分类基础 |
China National Standards Han |
English PDF |
| GB/T 33061.7-2023 |
Plastics - Determination of dynamic mecHanical properties - Part 7: Non-resonant torsional vibration method {译} 塑料 动态力学性能的测定 第7部分: 非共振扭转振动法 |
China National Standards Han |
English PDF |
| GB/T 33061.6-2023 |
Plastics - Determination of dynamic mecHanical properties - Part 6: Non-resonant shear vibration method {译} 塑料 动态力学性能的测定 第6部分：非共振剪切振动法 |
China National Standards Han |
English PDF |
| GB/T 33061.5-2023 |
Plastics - Determination of dynamic mecHanical properties - Part 5: Non-resonant bending vibration method {译} 塑料 动态力学性能的测定 第5部分：非共振弯曲振动法 |
China National Standards Han |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
