Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 7962.16-2010 |
Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient，transformation temperature and yield point temperature 无色光学玻璃测试方法 第16部分：线膨胀系数、转变温度和弛垂温度 |
China National Standards 1,6 |
 English PDF |
| GB/T 18268.25-2010 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 25: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/ 测量、控制和实验室用的电设备 电磁兼容性要求 第25部分：特殊要求 接口符合IEC61784-1, CP3/2的现场装置的试验配置、工作条件和性能判据 |
China National Standards 1,6 |
English PDF |
| GB/T 18268.24-2010 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 24: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and fo 测量、控制和实验室用的电设备 电磁兼容性要求 第24部分：特殊要求 符合IEC 61557-8的绝缘监控装置和符合IEC 61557-9的绝缘故障定位设备的试验配置、工作条件和性能判据 |
China National Standards 1,6 |
English PDF |
| GB/T 12085.16-2010 |
Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration and dry heat or cold 光学和光学仪器 环境试验方法 第16部分：弹跳或恒加速度与高温、低温综合试验 |
China National Standards 1,6 |
English PDF |
| GB 5199-2010 |
Information technology - Chinese ideogram coded character set (basic set) - 15×16 dot matrix font 信息技术 汉字编码字符集（基本集） 15×16点阵字型 |
China National Standards 1,6 |
English PDF |
| GB 25893.2-2010 |
Information technology - Universal multi-octet coded character set - Mongolian nominal characters and presentation forms - 16 Dot matrix font - Part2: Xinwen Ti 信息技术 通用多八位编码字符集 蒙古文名义字符与变形显现字符 16点阵字型 第2部分：新闻体 |
China National Standards 1,6 |
English PDF |
| GB 25908-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16×32 Dot matrix font - Tuz lean 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16×32点阵字型 正文白体 |
China National Standards 1,6 |
English PDF |
| GB 25907.8-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 8: Teilik bold 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第8部分：塔里克黑体 |
China National Standards 1,6 |
English PDF |
| GB 25907.7-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 7: Teilik lean 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第7部分：塔里克白体 |
China National Standards 1,6 |
English PDF |
| GB 25907.6-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 6: Ruki bold 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第6部分：如克黑体 |
China National Standards 1,6 |
English PDF |
| GB 25907.5-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font -Part 5: Ruki lean 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第5部分：如克白体 |
China National Standards 1,6 |
English PDF |
| GB 25907.4-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 4: Kufi bold 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第4部分：库非黑体 |
China National Standards 1,6 |
English PDF |
| GB 25907.3-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 3: Kufi lean 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第3部分：库非白体 |
China National Standards 1,6 |
English PDF |
| GB 25907.2-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 2:Tuz bold 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第2部分：正文黑体 |
China National Standards 1,6 |
English PDF |
| GB 25907.1-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 16 Dot matrix font - Part 1: Tuz lean 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 16点阵字型 第1部分：正文白体 |
China National Standards 1,6 |
English PDF |
| GB 25903.2-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 16 Dot matrix fonts - Part 2: Zhenghei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 16点阵字型 第2部分：正黑体 |
China National Standards 1,6 |
English PDF |
| GB 25903.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 16 Dot matrix fonts - Part 1: Zhengbai Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 16点阵字型 第1部分：正白体 |
China National Standards 1,6 |
English PDF |
| GB 25893.1-2010 |
Information technology - Universal multi-octet coded character set - Mongolian nominal characters and presentation forms - 16 Dot matrix font - Part 1: Bai Ti 信息技术 通用多八位编码字符集 蒙古文名义字符与变形显现字符 16点阵字型 第1部分：白体 |
China National Standards 1,6 |
English PDF |
| GB 17698-2010 |
Information technology - Universal multiple-octet coded character set (CJK unified ideographs) 15×16-dot matrix font 信息技术 通用多八位编码字符集(CJK统一汉字) 15×16点阵字型 |
China National Standards 1,6 |
English PDF |
| GB/T 25805-2010 |
Vat grey 3B（C.I. Vat black 16） 还原灰3B（C.I.还原黑16） |
China National Standards 1,6 |
English PDF |
| GB/T 25804-2010 |
Vat red 6B（C.I. Vat red 13） 还原红6B（C.I.还原红13） |
China National Standards 1,6 |
English PDF |
| GB/T 25790-2010 |
Reactive orange KN-3R 150%（C.I. Reactive orange 16） 反应橙KN-3R 150%（C.I.反应橙16） |
China National Standards 1,6 |
English PDF |
| GB 10395.16-2010 |
Agricultural and forestry machinery - Safety - Part 16: Potato harvesters 农林机械 安全 第16部分：马铃薯收获机 |
China National Standards 1,6 |
English PDF |
| GB/T 1598-2010 |
Platinum-10%Rhodium/Platinem thermocomouple wires - Platinum-13%Rhodium/Platinem thermocomouple wires - Platinum-30%Rhodium/Platinem-6%Rhodium thermocomouple wires 铂铑10-铂热电偶丝、铂铑13-铂热电偶丝、铂铑30-铂铑6热电偶丝 |
China National Standards 1,6 |
English PDF |
| GB/T 18491.6-2010 |
Information technology - Software measurement - Functional size measurement - Part 6: Guide for use of GB/T 18491 series and related standards 信息技术 软件测量 功能规模测量 第6部分：GB/T 18491系列标准和相关标准的使用指南 |
China National Standards 1,6 |
English PDF |
| GB/T 19520.17-2010 |
Mechanical structures for electronic equipment - Dimension of mechanical structures of the 482.6 mm（19 in）series - Part 3-105: Dimensions and design aspects for 1U high chassis 电子设备机械结构 482.6mm“（19in）系列机械结构尺寸 第3-105部分：1U高度机箱的尺寸和设计要求 |
China National Standards 1,6 |
English PDF |
| GB/T 14506.28-2010 |
Methods for chemical analysis of silicate rocks - Part 28: Determination of 16 major and minor elements content 硅酸盐岩石化学分析方法 第28部分：16个主次成分量测定 |
China National Standards 1,6 |
English PDF |
| GB/T 14506.16-2010 |
Methods for chemical analysis of silicate rocks - Part 16: Determination of rubidium content 硅酸盐岩石化学分析方法 第16部分：铷量测定 |
China National Standards 1,6 |
English PDF |
| GB/T 14353.16-2010 |
Methods for chemical analysis of copper ores, lead ores and zinc ores - Part 16: Determination of tellurium content 铜矿石、铅矿石和锌矿石化学分析方法 第16部分：碲量测定 |
China National Standards 1,6 |
English PDF |
| GB/T 14352.16-2010 |
Methods for chemical analysis of tungsten ores and molybdenum ores - Part 16：Determination of selenium content 钨矿石、钼矿石化学分析方法 第16部分：硒量测定 |
China National Standards 1,6 |
English PDF |
| GB/T 25260.1-2010 |
Synthetic rubber latex - Part 1: Carboxyl styrene-butadiene rubber latex (XSBRL)56C、55B 合成胶乳 第1部分：羧基丁苯胶乳(XSBRL)56C、55B |
China National Standards 1,6 |
English PDF |
| GB/T 325.3-2010 |
Packaging container - Steel drums - Part 3：Non-removable head (tight head) drums with a minimum total capacity of 212l, 216.5l and 230l 包装容器 钢桶 第3部分：最小总容量212L、216.5L和230L闭口钢桶 |
China National Standards 1,6 |
English PDF |
| GB/T 325.2-2010 |
Packaging container - Steel drums - Part 2：Removable head (open head) drums with a minimum total capacity of 208l, 210l and 216.5l 包装容器 钢桶 第2部分：最小总容量208L、210L和216.5L全开口钢桶 |
China National Standards 1,6 |
English PDF |
| GB 5135.16-2010 |
Automatic sprinkler system - Part 16：Flexible sprinkler hose with fittings 自动喷水灭火系统 第16部分：消防洒水软管 |
China National Standards 1,6 |
English PDF |
| GB/T 23561.16-2010 |
Methods for determining the physical and mechanical properties of coal and rock - Part 16: Method for determining slake durability index of rock 煤和岩石物理力学性质测定方法 第16部分：岩石耐崩解性指数测定方法 |
China National Standards 1,6 |
English PDF |
| GB/T 7717.16-2009 |
Acrylonitrile for industrial use - Part 16: Determination of content of iron - Graphite furnace atomic absorption spectrometer method 工业用丙烯腈 第16部分：铁含量的测定 石墨炉原子吸收法 |
China National Standards 1,6 |
English PDF |
| GB/T 16484.16-2009 |
Chemical analysis methods of rare earth chloride and light rare earth carbonate - Part 16: Determination of water insoluble substance content in rare earth chloride - Gravimetry 氯化稀土、碳酸轻稀土化学分析方法 第16部分：氯化稀土中水不溶物量的测定 重量法 |
China National Standards 1,6 |
English PDF |
| GB/T 9649.16-2009 |
Terminology classification and code of geology and mineral resources - Part 16: Mineral deposit geology 地质矿产术语分类代码 第16部分：矿床学 |
China National Standards 1,6 |
English PDF |
| GB/T 24371-2009 |
Spinning preparatory, spinning and doubling (twisting) machinery - Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 纺纱准备、纺纱和并（捻）机械 环锭纺、并、捻锭子用筒管 锥度1∶38和1∶64 |
China National Standards 1,6 |
English PDF |
| GB/T 24288-2009 |
Paper and board - Determination of dominant wavelength and excitation purity - D65/10°diffuse reflectance method 纸和纸板 主波长和兴奋纯度的测定 D65/10°漫反射法 |
China National Standards 1,6 |
English PDF |
| GB/T 24148.6-2009 |
Plastics - Unsaturated-polyester resins - Part 6: Determination of reactivity at 130℃ 塑料 不饱和聚酯树脂 (UP-R) 第6部分：130℃反应活性测定 |
China National Standards 1,6 |
English PDF |
| GB/T 2910.16-2009 |
Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene and certain other fibres (method using xylene) 纺织品 定量化学分析 第16部分：聚丙烯纤维与某些其他纤维的混合物（二甲苯法） |
China National Standards 1,6 |
English PDF |
| GB/T 23834.6-2009 |
Chemical analysis method for stannous sulfate - Part 6: Determination of iron content - 1,10-phenanthroline spectrophotometry 硫酸亚锡化学分析方法 第6部分：铁含量的测定 邻菲啰啉分光光度法 |
China National Standards 1,6 |
English PDF |
| GB/T 4103.16-2009 |
Methods for chemical analysis of lead and lead alloys - Part 16: Determination of copper，silver，bismuth，arsenic，antimony，tin and zinc contents - Optical emission spectrometry 铅及铅合金化学分析方法 第16部分：铜、银、铋、砷、锑、锡、锌量的测定 光电直读发射光谱法 |
China National Standards 1,6 |
English PDF |
| GB/T 22838.16-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 16: Cigarettes - Determination of loss of tobacco from the ends - Method using a rotating cylindrical cage 卷烟和滤棒物理性能的测定 第16部分：卷烟 端部掉落烟丝的测定 旋转笼法 |
China National Standards 1,6 |
English PDF |
| GB/T 23296.17-2009 |
Food contact materials - Polymer - Determination of 1,2-diaminoethane and 1,6-diaminohexane in food simulants - Gas chromatography 食品接触材料 高分子材料 食品模拟物中乙二胺与己二胺的测定 气相色谱法 |
China National Standards 1,6 |
English PDF |
| GB/T 23296.15-2009 |
Food contact materials - Polymer - Determination of 2,4,6-triamino-1,3,5-triazine（melamine）in food simulants - High performance liquid chromatography 食品接触材料 高分子材料 食品模拟物中2，4，6-三氨基-1，3，5-三嗪（三聚氰胺）的测定 高效液相色谱法 |
China National Standards 1,6 |
English PDF |
| GB/T 23312.6-2009 |
Enamelled round aluminium winding wire - Part 6: Polyester or polyesterimide overcoated with polyamide enamelled round aluminium wire, class 180 漆包铝圆绕组线 第6部分：180级聚酯或聚酯亚胺/聚酰胺复合漆包铝圆线 |
China National Standards 1,6 |
English PDF |
| GB/T 23306-2009 |
Specifications for flameproof three-phase asynchronous motors for use on dispensers （frame size 63 to 100） 燃油加油机用隔爆型三相异步电动机(机座号63～100)技术条件 |
China National Standards 1,6 |
English PDF |
| GB/T 19520.15-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分：基于连接器的插箱和插件的接口尺寸 |
China National Standards 1,6 |
English PDF |
| GB/T 19520.14-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-103: Keying and alignment pin 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-103部分：编码键和定位销 |
China National Standards 1,6 |
English PDF |
| GB/T 19520.13-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-102: Injector/extractor handle 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-102部分：插拔器手柄 |
China National Standards 1,6 |
English PDF |
| GB/T 19520.12-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-101部分：插箱及其插件 |
China National Standards 1,6 |
English PDF |
| GB/T 23284-2009 |
Micrographics - Image mark (blip) used with 16mm and 35mm roll microfilm 缩微摄影技术 16mm和35mm卷式缩微胶片使用的影像标记(光点) |
China National Standards 1,6 |
English PDF |
| GB/T 19216.31-2008 |
Tests for electric or optical fibre cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0.6/1 kV 在火焰条件下电缆或光缆的线路完整性试验 第31部分：供火并施加冲击的试验程序和要求 额定电压0.6/1kV及以下电缆 |
China National Standards 1,6 |
English PDF |
| GB/T 12706.4-2008 |
Power cables with extruded insulation and their accessories for rated voltages from lkV (Um=1.2kV) up to 35kV(Um=40.5kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6kV(Um=7.2kV) up to 35kV(Um=40.5kV) 额定电压1kV(Um=1.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆及附件 第4部分：额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)电力电缆附件试验要求 |
China National Standards 1,6 |
English PDF |
| GB/T 12706.2-2008 |
Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 2: Cables for rated voltages from 6kV(Um=7.2kV) up to 30kV(Um=36kV) 额定电压1kV(Um=1.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆及附件 第2部分：额定电压6kV(Um=7.2kV)到30kV(Um=36kV)电缆 |
China National Standards 1,6 |
English PDF |
| GB/T 12706.1-2008 |
Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV) - Part 1: Cables for rated voltage of 1kV (Um=1.2kV) and 3kV (Um=3.6kV) 额定电压1kV(Um=1.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆及附件 第1部分：额定电压1kV(Um=1.2kV)和3kV(Um=3.6kV)电缆 |
China National Standards 1,6 |
English PDF |
| GB/T 20772-2008 |
Determination of 461 pesticides and related chemicals residues in animal muscles - LC-MS-MS method 动物肌肉中461种农药及相关化学品残留量的测定 液相色谱-串联质谱法 |
China National Standards 1,6 |
English PDF |
| GB/T 22899.1-2008 |
Paper and board - Measurement of hygroexpansivity - Part 1: Hygroexpansivity up to a maximum relative humidity of 68% 纸和纸板 湿膨胀率的测定 第1部分：最大相对湿度增加到68%过程的湿膨胀率 |
China National Standards 1,6 |
English PDF |
| GB/T 22880-2008 |
Paper and board - Determination of CIE whiteness, D65/10°(outdoor daylight) 纸和纸板 CIE白度的测定，D65/10°(室外日光) |
China National Standards 1,6 |
English PDF |
| GB/T 14048.11-2008 |
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment 低压开关设备和控制设备 第6-1部分：多功能电器 转换开关电器 |
China National Standards 1,6 |
English PDF |
| GB 22320-2008 |
Information technology - Chinese coded character set - 15×16-dots matrix font of Chinese ideogram 信息技术 中文编码字符集 汉字15×16点阵字型 |
China National Standards 1,6 |
English PDF |
| GB 14245.1-2008 |
Information technology - Chinese ideogram coded character set (basic set) - 64 dot matrix font - Part 1:Song Ti 信息技术 汉字编码字符集（基本集） 64点阵字型 第1部分：宋体 |
China National Standards 1,6 |
English PDF |
| GB/T 7497.3-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors 微处理器系统总线 8位及16位数据（MULTIBUS I) 第3部分：对带有插针与插座连接器(间接配合)的欧洲板配置的机械与插针的描述 |
China National Standards 1,6 |
English PDF |
| GB/T 7497.2-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connectors(direct) 微处理器系统总线 8位及16位数据（MULTIBUS I） 第2部分：对带有边缘连接器(直接配合)的系统总线配置的机械与引脚的描述 |
China National Standards 1,6 |
English PDF |
| GB/T 7497.1-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 1: Functional description with electrical and timing specifications 微处理器系统总线 8位及16位数据(MULTIBUS I) 第１部分: 电气与定时规范的功能描述 |
China National Standards 1,6 |
English PDF |
| GB/T 16573-2008 |
Micrographics - Microfilming of documents on 16 mm and 35 mmsilver-gelatin type microfilm - Operating procedures 缩微摄影技术 在16mm和35mm银-明胶型 缩微胶片上拍摄文献的操作程序 |
China National Standards 1,6 |
English PDF |
| GB/T 5271.16-2008 |
Information technology - Vocabulary Part 16: Information theory 信息技术 词汇 第16部分：信息论 |
China National Standards 1,6 |
English PDF |
| GB/T 12356-2008 |
Micrographics - 16 mm planetary cameras - Test target for checking performance 缩微摄影技术 16mm平台式缩微摄影机用测试标板的特征及其使用 |
China National Standards 1,6 |
English PDF |
| GB/T 4854.5-2008 |
Acoustics - Reference zero for the calibration of audiometric equipment- Part 5: Reference equivalent threshold sound pressure levels for pure tone in the frequency range 8 kHz to 16 kHz 声学 校准测听设备的基准零级 第5部分：8kHz-16kHz频率范围纯音基准等效阈声压级 |
China National Standards 1,6 |
English PDF |
| GB/T 12972.7-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 6：Flexible cables with screens for rated voltages up to 6/10kV 矿用橡套软电缆 第7部分：额定电压6/10kV及以下屏蔽橡套软电缆 |
China National Standards 1,6 |
English PDF |
| GB/T 12972.6-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 6：Flexible cables with monitoring core and metallic screens for rated voltages up to 6/10kV 矿用橡套软电缆 第6部分：额定电压6/10kV及以下金属屏蔽监视型软电缆 |
China National Standards 1,6 |
English PDF |
| GB/T 12972.5-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 5：Flexible cables for rated voltages up to 0.66/1.14kV 矿用橡套软电缆 第5部分: 额定电压0.66/1.14kV 及以下移动橡套软电缆 |
China National Standards 1,6 |
English PDF |
| GB/T 12972.3-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 3：Trailing coalcutter cables with monitoring core and semiconducting screens for rated voltage of 0.66/1.14kV 矿用橡套软电缆 第3部分: 额定电压0.66/1.14kV 采煤机屏蔽监视加强型软电缆 |
China National Standards 1,6 |
English PDF |
| GB/T 22057.1-2008 |
Microscopes - Imaging distances related to mechanical reference planes - Part 1: Tube length 160mm 显微镜 相对机械参考平面的成像距离 第1部分：筒长160mm |
China National Standards 1,6 |
English PDF |
| GB/T 22055.1-2008 |
Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5in×1/36in) 显微镜 物镜螺纹 第1部分：RMS型物镜螺纹（4/5in×1/36in） |
China National Standards 1,6 |
English PDF |
| GB/T 5121.16-2008 |
Methods for chemical analysis of copper and copper alloys - Part 16:Determination of chromium content 铜及铜合金化学分析方法 第16部分：铬含量的测定 |
China National Standards 1,6 |
English PDF |
| GB/T 5169.16-2008 |
Fire hazard testing for electric and electronic products - Part 16: Test flames - 50W horizontal and vertical flame test methods 电工电子产品着火危险试验 第16部分: 试验火焰 50W 水平与垂直火焰试验方法 |
China National Standards 1,6 |
English PDF |
| GB/T 6109.16-2008 |
Enamelled round winding wire - Part 16: Solderable polyurethane enamelled round copper wire,class 155,with a bonding layer 漆包圆绕组线 第16部分：155级自粘性直焊聚氨酯漆包铜圆线 |
China National Standards 1,6 |
English PDF |
| GB/T 21629-2008 |
Dangerous goods - Bullet impact test method of division 1.6 article 危险品 1.6项物品的子弹撞击试验方法 |
China National Standards 1,6 |
English PDF |
| GB/T 21628-2008 |
Dangerous goods - External fire test method of division 1.6 article 危险品 1.6项物品的外部火烧试验方法 |
China National Standards 1,6 |
English PDF |
| GB/T 20975.16-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 16：Determination of magnesium 铝及铝合金化学分析方法 第16部分：镁含量的测定 |
China National Standards 1,6 |
English PDF |
| GB/T 18663.1-2008 |
Mechanical structures for electronic equipment Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis 电子设备机械结构 公制系列和英制系列的试验 第1部分: 机柜、机架、插箱和机箱的气候、机械试验及安全要求 |
China National Standards 1,6 |
English PDF |
| GB/T 21450-2008 |
Crude petroleum and petroleum products - Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1074 kg/m3 原油和石油产品 密度在638kg/m3到1074 kg/m3范围内的烃压缩系数 |
China National Standards 1,6 |
English PDF |
| GB/T 18663.3-2007 |
Mechanical structure for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets,racks and subracks 电子设备机械结构 公制系列和英制系列的试验 第3部分：机柜、机架和插箱的电磁屏蔽性能试验 |
China National Standards 1,6 |
English PDF |
| GB/T 3048.16-2007 |
Test methods for electrical properties of electric cables and wires - Part 16: Surface resistance test 电线电缆电性能试验方法 第16部分：表面电阻试验 |
China National Standards 1,6 |
English PDF |
| GB/T 21113-2007 |
Reels for 16mm motion picture projectors - Dimensions 16mm电影放映机片夹尺寸 |
China National Standards 1,6 |
English PDF |
| GB/T 21109.2-2007 |
Functional safety-Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 过程工业领域安全仪表系统的功能安全 第2部分：GB/T 21109.1的应用指南 |
China National Standards 1,6 |
English PDF |
| GB/T 14805.6-2007 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 6: Secure authentication and acknowledgement message(message type - AUTACK) 行政、商业和运输业电子数据交换（EDIFACT） 应用级语法规则(语法版本号:4，语法发布号:1) 第6部分: 安全鉴别和确认报文(报文类型为AUTACK) |
China National Standards 1,6 |
English PDF |
| GB/T 4022.1-2007 |
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1：Machines with a table surface length of up to 1600 mm 卧轴矩台平面磨床 精度检验 第1部分：工作台面长度至1600mm的机床 |
China National Standards 1,6 |
English PDF |
| GB/T 18311.16-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules 纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分：检查和测量 球面抛光套管端面半径 |
China National Standards 1,6 |
English PDF |
| GB/T 11313.4-2007 |
Radio-frequency connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器 第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards 1,6 |
English PDF |
| GB/T 4127.16-2007 |
Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools 固结磨具 尺寸 第16部分：手持式电动工具用切割砂轮 |
China National Standards 1,6 |
English PDF |
| GB 17625.2-2007 |
Eiectromagnetic compatibility limits(EMC) - Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems,for equipment with rated current ≤16A per phase and not subject to conditional connection 电磁兼容 限值 对每相额定电流≤16A且无条件接入的设备在公用低压供电系统中产生的电压变化、电压波动和闪烁的限制 |
China National Standards 1,6 |
English PDF |
| GB/T 19851.16-2007 |
Sports equipment and playground for middle school ＆ primary school - Part 16：Hurdle shelf 中小学体育器材和场地 第16部分：跨栏架 |
China National Standards 1,6 |
English PDF |
| GB/T 328.16-2007 |
Test methods for building sheets for waterproofing - Part 16: Plastic and rubber sheets for waterproofing-exposure to liquid chemicals including water 建筑防水卷材试验方法 第16部分：高分子防水卷材 耐化学液体（包括水） |
China National Standards 1,6 |
English PDF |
| GB/T 20895.1-2007 |
Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6m 小艇 稳性和浮性的评定与分类 第1部分：艇体长度不小于6m的非帆艇 |
China National Standards 1,6 |
English PDF |
| GB/T 20870.1-2007 |
Semiconductor devices - Part 16-1: Microwave integrated circuits - Amplifiers 半导体器件 第16-1部分：微波集成电路 放大器 |
China National Standards 1,6 |
English PDF |
| GB/T 18663.2-2007 |
Mechanical structure for electronic equipment Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks 电子设备机械结构 公制系列和英制系列的试验 第2部分：机柜和机架的地震试验 |
China National Standards 1,6 |
English PDF |
| GB/T 19659.3-2006 |
Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems 工业自动化系统与集成 开放系统应用集成框架 第3部分：基于IEC 61158控制系统的参考描述 |
China National Standards 1,6 |
English PDF |
| GB/T 4169.16-2006 |
Components of injection moulds for plastics - Part 16: Shouldered ejector pin 塑料注射模零件 第16部分: 带肩推杆 |
China National Standards 1,6 |
English PDF |
| GB/T 4841.3-2006 |
Colour cards of standard depths for dyeing with dyestuffs 2/1、1/3、1/6、1/12、1/25 染料染色标准深度色卡 2/1、1/3、1/6、1/12、1/25 |
China National Standards 1,6 |
English PDF |
| GB 3836.16-2006 |
Electrical apparatus for explosive gas atmospheres―Part 16: Inspection and maintenance of electrical installation(other than mines) 爆炸性气体环境用电气设备 第16部分: 电气装置的检查和维护（煤矿除外） |
China National Standards 1,6 |
English PDF |
| GB/T 20226.2-2006 |
Micrographics -- A6 size microfilm jackets Part 2: Other types of jacket for 16mm and 35mm microfilm 缩微摄影技术 缩微胶片A6尺寸封套 第2部分:16mm和35mm缩微胶片用其他类型封套 |
China National Standards 1,6 |
English PDF |
| GB/T 20226.1-2006 |
Micrographics - A6 size microfilm jackets - Part 1: Five channel jacket for 16mm microfilm 缩微摄影技术 缩微胶片A6尺寸封套 第1部分:16mm缩微胶片用五片道封套 |
China National Standards 1,6 |
English PDF |
| GB/T 3871.16-2006 |
Agricultural tractors - Test procedures - Part 16: Axle power determination 农业拖拉机 试验规程 第16部分：轴功率测定 |
China National Standards 1,6 |
English PDF |
| GB/T 3810.16-2006 |
Test methods of ceramic tiles Part 16: Determination of small colour differences 陶瓷砖试验方法 第16部分:小色差的测定 |
China National Standards 1,6 |
English PDF |
| GB/T 19969-2005 |
Information technology -- 130 mm optical disk cartridges for information interchange -- Capacity : 2.6 Gbytes per cartridge 信息技术 信息交换用130mm盒式光盘 容量：每盒2.6G字节 |
China National Standards 1,6 |
English PDF |
| GB 19966-2005 |
Information technology -- Universal multiple-octet coded character set(Basic Multiling plane)-16-dots matrix font of Chinese ideogram 信息技术 通用多八位编码字符集(基本多文种平面)汉字16点阵字型 |
China National Standards 1,6 |
English PDF |
| GB 19212.16-2005 |
Safety of power transformers ,power supply units and similar devices -- Part 16: Particular requirements for isolating transformers for the supply of medical locations 电力变压器、电源装置和类似产品的安全 第16部分：医疗场所供电用隔离变压器的特殊要求 |
China National Standards 1,6 |
English PDF |
| GB 5226.3-2005 |
Sefety of machinery-Eletrical equipment of machines-Part 11:Requirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exceeding 36kV 机械安全 机械电气设备 第11部分：电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件 |
China National Standards 1,6 |
English PDF |
| GB/T 19896-2005 |
Degrees of projected image sharpness for 70,35and 16mm motion-picture projection systems 70、35和16mm电影放映系统 画面清晰度等级 |
China National Standards 1,6 |
English PDF |
| GB/T 17213.6-2005 |
Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分：定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards 1,6 |
English PDF |
| GB/T 7700-2005 |
Spindle for 16mm motion picture projector reels-Dimensions 16mm电影放映机片轴 尺寸 |
China National Standards 1,6 |
English PDF |
| GB/T 19735-2005 |
Micrographics-Rotary camera for 16 mm microfilm-Mechanical and optical characteristics 缩微摄影技术 16mm缩微胶片轮转式摄影机 机械与光学特性 |
China National Standards 1,6 |
English PDF |
| GB/T 13151-2005 |
Semiconductor devices Discrete devices Part 6:Thyristors Section Three-Blank detail specification for reverse blocking triode thyristors,ambient and case-rated,for currents greater than 100A 半导体器件 分立器件 第6部分:晶闸管 第3篇 电流大于 100A、环境和管壳额定的反向阻断三极晶闸管空白详细规范 |
China National Standards 1,6 |
English PDF |
| GB/T 16855.100-2005 |
Safety of machinery-Safety-related parts of control systems-Part 100:Guidelines for the use and application of GB/T 16855.1 机械安全 控制系统有关安全部件 第100部分:GB/T 16855.1的应用指南 |
China National Standards 1,6 |
English PDF |
| GB/T 18700.8-2005 |
Telecontrol equipment and systems-Part 6-601:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-Functional profile for providing the connection-oriented transport service in an end system connected via permanent access to a pac 远动设备和系统 第6-601部分:与ISO标准和ITU-T建议 兼容的远动协议 在通过永久接入分组交换数据网连接的端系统中提供基于连接传输服务的功能协议集 |
China National Standards 1,6 |
English PDF |
| GB/T 18700.6-2005 |
Telecontrol equipment and systems-Part 6-2:Telecontrol protocols compatible with ISO standards and ITU-T recommendations-Use of basic standards(OSI layers 1-4) 远动设备和系统 第6-2部分:与ISO标准和ITU-T建议 兼容的远动协议 OSI 1至4层基本标准的使用 |
China National Standards 1,6 |
English PDF |
| GB/T 19523-2004 |
Micrographics--16mm and 35mm microfilm spools and reels--Specifications 缩微摄影技术 16mm与35mm 缩微胶片防光片盘与片盘 技术规范 |
China National Standards 1,6 |
English PDF |
| GB/T 7517-2004 |
Micrographics--Microfilming for ancient books on 16mm roll film 缩微摄影技术 在16mm卷片上拍摄古籍的规定 |
China National Standards 1,6 |
English PDF |
| GB/T 17980.61-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 61:Insecticides against sugarcane borer 农药 田间药效试验准则(二) 第61部分:杀虫剂防治甘蔗螟虫 |
China National Standards 1,6 |
English PDF |
| GB/T 17980.136-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 136:Restrain shoot medicament trials on tobacoo 农药 田间药效试验准则(二) 第136部分:烟草抑芽剂试验 |
China National Standards 1,6 |
English PDF |
| GB/T 17980.126-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 126:Herbicides against weeds in peanut 农药 田间药效试验准则(二) 第126部分:除草剂防治花生田杂草 |
China National Standards 1,6 |
English PDF |
| GB/T 17980.116-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 116:Fungicides against recur canker of apple and pear 农药 田间药效试验准则(二) 第116部分:杀菌剂防治苹果和梨树腐烂病疤(斑)复发 |
China National Standards 1,6 |
English PDF |
| GB/T 17980.106-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 106:Fungicides against head smut of corn 农药 田间药效试验准则(二) 第106部分:杀菌剂防治玉米丝黑穗病 |
China National Standards 1,6 |
English PDF |
| GB/T 17980.146-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 146:Plant growth regulator trials on the figure index of apple 农药 田间药效试验准则(二) 第146部分:植物生长调节剂提高苹果果形指数试验 |
China National Standards 1,6 |
English PDF |
| GB/T 4258-2004 |
Parallel shanks countersinks for angles60°、90°and 120° inclusive 60°、90°、120°直柄锥面锪钻 |
China National Standards 1,6 |
English PDF |
| GB/T 1143-2004 |
Morse taper shank countersinks for angles 60° and 90°，120° inclusive 60°、90°、120°莫氏锥柄锥面锪钻 |
China National Standards 1,6 |
English PDF |
| GB 9706.2-2003 |
Medical electrical equipment--Part 2-16: Particular requirements for the safety of haemodialysis，haemodiafiltration and haemofiltration equipment 医用电气设备 第2-16部分:血液透析、血液透析滤过和血液滤过设备的安全专用要求 |
China National Standards 1,6 |
English PDF |
| GB/Z 18700.5-2003 |
Telecontrol equipment and systems--Part 6-1: Telecontrol protocols compatible with ISO standards and ITU-T recommendations--Application contextand organization of standards 远动设备及系统 第6-1部分:与ISO标准和ITU-T建议兼容的远动协议标准的应用环境和结构 |
China National Standards 1,6 |
English PDF |
| GB/T 4678.16-2003 |
Die-casting die components--Part 16: Flat ejector pin 压铸模零件 第16部分:扁推杆 |
China National Standards 1,6 |
English PDF |
| GB/T 19230.6-2003 |
Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method) 评价汽油清净剂使用效果的试验方法 第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(M111法) |
China National Standards 1,6 |
English PDF |
| GB/T 19216.21-2003 |
Tests for electric cables under fire conditions--Circuit integrity--Part 21: Procedures and requirements--Cables of rated voltage up to and including 0.6/1.0kV 在火焰条件下电缆或光缆的线路完整性试验 第21部分:试验步骤和要求 额定电压0.6/1.0 kV及以下电缆 |
China National Standards 1,6 |
English PDF |
| GB/T 18995-2003 |
Cinematography--Manufacturer-printed，latent image identification on 16mm，35mm and 65mm motion-picture film--Specifications and dimensions 电影摄影术 在16mm、35mm和65mm电影胶片上由制造厂印制的潜影标识 规范和尺寸 |
China National Standards 1,6 |
English PDF |
| GB/Z 17625.6-2003 |
Electromagnetic compatibility--Limits--Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A 电磁兼容 限值 对额定电流大于16A的设备在低压供电系统中产生的谐波电流的限制 |
China National Standards 1,6 |
English PDF |
| GB/T 13477.16-2002 |
Test method for buildingsealants--Part 16:Determination of resistance to compression 建筑密封材料试验方法 第16部分:压缩特性的测定 |
China National Standards 1,6 |
English PDF |
| GB/T 5297-2002 |
Cinematography--Maximum permissible area for subtitle on 35mm and 16mm motion-picture release prints--Position and dimensions 35mm和16mm电影发行影片字幕最大可允许区域的位置和尺寸 |
China National Standards 1,6 |
English PDF |
| GB/T 6075.6-2002 |
Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 6:Reciprocating machines with power ratings above 100kW 在非旋转部件上测量和评价机器的机械振动 第6部分:功率大于100kW的往复式机器 |
China National Standards 1,6 |
English PDF |
| GB/T 1962.1-2001 |
The conical fittings with a 6%(Luer)taper for syringes，needles and certain other medical equipment--Part 1:General requirement 注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分:通用要求 |
China National Standards 1,6 |
English PDF |
| GB/T 18230.6-2000 |
Hexagon nuts for structural bolting，style 1，hot-dip galvanized (oversize tapped)--Product grades A and B--Property classes 5，6 and 8 栓接结构用1型六角螺母 热浸镀锌(加大攻丝尺寸) A和B级 5、6和8级 |
China National Standards 1,6 |
English PDF |
| GB/T 18230.1-2000 |
Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 |
China National Standards 1,6 |
English PDF |
| GB/T 4641-2000 |
Camera usage of 16mm motion-picture film 16mm电影胶片在摄影机上的用法 |
China National Standards 1,6 |
English PDF |
| GB/T 2926-2000 |
Leaders and run-out trailers for 35mm and 16mm release prints--Specification 35mm和16mm电影发行拷贝片头和片尾的技术规格 |
China National Standards 1,6 |
English PDF |
| GB/Z 17625.3-2000 |
Electromagnetic compatibility--Limits--Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A 电磁兼容 限值 对额定电流大于16 A的设备在低压供电系统中产生的电压波动和闪烁的限制 |
China National Standards 1,6 |
English PDF |
| GB/T 17179.2-2000 |
Information technology--Protocol for providing the connectionless-mode network service--Part 2:Provision of the underlying service by a GB/T 15629(ISO/IEC 8802) subnetwork 信息技术 提供无连接方式网络服务的协议 第2部分:由GB/T 15629(ISO/IEC 8802)子网提供低层服务 |
China National Standards 1,6 |
English PDF |
| GB/T 7631.16-1999 |
Lubricants and related products(class L)--Classification--Part 16:Family P (Pneumatic tools) 润滑剂和有关产品(L类)的分类 第16部分:P组(气动工具) |
China National Standards 1,6 |
English PDF |
| GB/T 7399.3-1999 |
Helical-scan video tape cassette system using 12.65 mm magnetic tape on type S-VHS S-VHS型12.65 mm螺旋扫描盒式磁带录像系统 |
China National Standards 1,6 |
English PDF |
| GB/T 13997-1999 |
Technical requirement for 2048kbit/s，8448kbit/s，34368kbit/s，139264kbit/s optical line terminals 2048kbit/s、8448kbit/s、34368kbit/s、139264kbit/s光端机技术要求 |
China National Standards 1,6 |
English PDF |
| GB/T 4772.2-1999 |
Dimensions and output series for rotating electrical machines--Part 2:Frame numbers 355 to 1000 and flange numbers 1180 to 2360 旋转电机尺寸和输出功率等级 第2部分:机座号355～1000和凸缘号1180～2360 |
China National Standards 1,6 |
English PDF |
| GB/T 4772.1-1999 |
Dimensions and output series for rotating electrical machines--Part 1:Frame numbers 56 to 400 and flange numbers 55 to 1080 旋转电机尺寸和输出功率等级 第1部分:机座号56～400和凸缘号55～1080 |
China National Standards 1,6 |
English PDF |
| GB/T 6590-1998 |
Semiconductor devices--Discrete devices--Part6:Thyristors--Section Two:Blank detail specification for bidirectional triode thyristors(triacs)，ambient or case-rated，up to 100A 半导体器件 分立器件 第6部分:闸流晶体管 第二篇 100A以下环境或管壳额定的双向三极闸流晶体管空白详细规范 |
China National Standards 1,6 |
English PDF |
| GB/T 6352-1998 |
Semiconductor devices--Discrete devices--Part 6:Thyristors--Section One:Blank detail specification for reverse blocking triode thyristors，ambient or case-rated，up to 100A 半导体器件 分立器件 第6部分:闸流晶体管 第一篇 100A以下环境或管壳额定反向阻断三极闸流晶体管空白详细规范 |
China National Standards 1,6 |
English PDF |
| GB/T 13420-1998 |
Electromechanical switches for use in electronic equipment--Part 6:Sectional specification for sensitive switches--Section 1:Blank detail specification 电子设备用机电开关 第6部分:微动开关分规范 第1篇:空白详细规范 |
China National Standards 1,6 |
English PDF |
| GB/T 17281-1998 |
Natural gas--Determination of hydrocarbons from butane(C4) to hexadecane(C16)--Gas chromato-graphic method 天然气中丁烷至十六烷烃类的测定 气相色谱法 |
China National Standards 1,6 |
English PDF |
| GB/T 5095.12-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 12:Soldering tests--Section 6:Test 12f--Sealing against flux and cleaning solvents inmachine soldering 电子设备用机电元件 基本试验规程及测量方法 第12部分:锡焊试验 第六篇:试验12f在机器焊接中封焊处耐焊剂和清洁剂 |
China National Standards 1,6 |
English PDF |
| GB/T 15863-1995 |
VHS 12.65mm VTR’s calibration tapes VHS型12.65 mm录像机校准带 |
China National Standards 1,6 |
English PDF |
| GB/T 15845.1-1995 |
Performance requirements of audiovisual terminals--Frame structure for a 64 to 1920kbit/s channel in audiovisual teleservices 视听用户终端技术要求 视听用户终端业务中64～1920kbit/s信道的帧结构 |
China National Standards 1,6 |
English PDF |
| GB/T 15840-1995 |
Technical requirement for optical line terminals at 4×139 264 kbit/s 4×139 264 kbit/s 光端机技术要求 |
China National Standards 1,6 |
English PDF |
| GB/T 15839-1995 |
Networking specifications for64～1920 kbit/s video-conferencing systems 64～1920 kbit/s会议电视系统进网技术要求 |
China National Standards 1,6 |
English PDF |
| GB/T 15130.2-1995 |
Information processing--Data interchange on 90mm flexible disk cartridges using modified frequency modulation recording at15916 ftprad， on 80 tracks on each side--Part 2:Track format 信息处理 数据交换用90 mm改进调频制记录的位密度为15916磁通翻转/弧度、每面80条磁道的软磁盘 第二部分:磁道格式 |
China National Standards 1,6 |
English PDF |
| GB/T 15131.3-1995 |
Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad， on 80 tracks on each side--Part 3:Track formatB for 80 tracks 信息处理 数据交换用130 mm改进调频制记录的位密度为13262磁通翻转/弧度、每面80条磁道的软磁盘 第三部分:磁道格式B(用于80条磁道) |
China National Standards 1,6 |
English PDF |
| GB/T 15131.2-1995 |
Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad， on 80 tracks on each side--Part 2:Track format A for 77 tracks 信息处理 数据交换用130 mm改进调频制记录的位密度为13262磁通翻转/弧度、每面80条磁道的软磁盘 第二部分:磁道格式 A ( 用于77条磁道) |
China National Standards 1,6 |
English PDF |
| GB/T 11324-1995 |
Performance and test methods of the fourth order digital multiplex equimpent operatingat 139264 kbit/s and using positive justification 139264kbit/s正码速调整四次群数字复用设备技术要求和测试方法 |
China National Standards 1,6 |
English PDF |
| GB/T 15522-1995 |
FM audio recording of helical-scan video tape cassette system using 12.65mm magnetic tape on type VHS VHS型12.65 mm螺旋扫描盒式录像系统的调频音频记录 |
China National Standards 1,6 |
English PDF |
| GB/T 5875-1994 |
Recorded characteristics for magnetic sound records on 35mm and 16mm motion-picture films containing no picture 35mm和16mm磁片的录音特性 |
China National Standards 1,6 |
English PDF |
| GB/T 15131.1-1994 |
Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad，on 80 tracks on each side--Part 1:Dimensional， physical and magnetic characteristics 信息处理 数据交换用130 mm改进调频制记录的位密度为13262 磁通翻转/弧度、每面80条磁道的软磁盘 第一部分:尺寸、物理性能和磁性能 |
China National Standards 1,6 |
English PDF |
| GB/T 15130.1-1994 |
Information processing--Data interchange on 90mm (35in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad， on 80 tracks on each side--Part1:Dimensional， physical and magnetic characteristics 信息处理 数据交换用90 mm改进调频制记录的位密度为15916 磁通翻转/弧度、每面80条磁道的软磁盘 第一部分:尺寸、物理性能和磁性能 |
China National Standards 1,6 |
English PDF |
| GB/T 15118-1994 |
Technical requirement for digital line systems on optical fibre cables at 4×139264 kbit/s 4×139264 kbit/s 光缆数字线路系统技术要求 |
China National Standards 1,6 |
English PDF |
| GB/T 13921-1992 |
Guidelines for the evaluation of the response of occupants of fixed structures，especially buildings and off-shor structures，to low-frequency horizontal motion (0.063～1Hz) 关于固定结构特别是建筑物和海上结构的居住者对低频(0.063～1Hz)水平运动响应的评价导则 |
China National Standards 1,6 |
English PDF |
| GB/T 13747.8-1992 |
Zirconium and zirconium alloys--Determination of cobalt content--1-Nitroso-2-hydroxy-3，6-naphthalene-disulfonic acid (sodium salt) spectrophotometric method 锆及锆合金化学分析方法 亚硝基R盐分光光度法测定钴量 |
China National Standards 1,6 |
English PDF |
| GB/T 13169-1991 |
General specification for 4MHz (960ch) carrier systems on standardized 1.2/4.4 mm coaxial cable pairs 标准1.2/4.4 mm同轴线对上4 MHz (960路)载波通信系统总技术要求 |
China National Standards 1,6 |
English PDF |
| GB/T 13168-1991 |
General specification for 8MHz (1800ch) carrier systems on standardized 2.6/9.5mm coaxialcable pairs 标准2.6/9.5 mm 同轴线对上8 MHz (1800路) 载波通信系统总技术要求 |
China National Standards 1,6 |
English PDF |
| GB/T 13137-1991 |
Specification for 12-channel telephone carrier terminal equipment used on the symmetric pains of 2.6/9.5 mm coaxial cable 2.6/9.5 mm综合中同轴电缆高频四芯组或高频线对12路载波电话终端设备技术条件 |
China National Standards 1,6 |
English PDF |
| GB/T 13135-1991 |
15×16 Dot matrix font set and data set of Yi characters for information interchange 信息交换用彝文字符15×16点阵字模集及数据集 |
China National Standards 1,6 |
English PDF |
| GB/T 12509-1990 |
16， 24 Dot matrix font setand data set of Uighur character for information interchange 信息交换用维吾尔文16、24点阵字母集及数据集 |
China National Standards 1,6 |
English PDF |
| GB/T 9716-1988 |
Information processing--Unrecorded 12.7mm (0.5in)wide magnetic tape for information interchange-32ftpmm(800 ftpi)NRZ1，126ftpmm(3200ftpi)phase encoded and 356ftpmm(9042ftpi) NRZ1 信息处理 信息交换用9磁道，12.7mm(0.5in)未记录磁带 32ftpmm(800ftpi)NRZ1制，126ftpmm(3200ftpi)调相制和356ftpmm(9042ftpi)NRZ1制 |
China National Standards 1,6 |
English PDF |
| GB/T 9413-1988 |
Methods of measurement of modems for wide band using 60～108 kHz group band circuits 用于60～108 kHz基群电路的宽带调制解调器的测量方法 |
China National Standards 1,6 |
English PDF |
| GB/T 9412-1988 |
Modems for date transmission at 48 kilobits per second using 60～108 kHz group band circuits 用于60～108 kHz基群电路的48 kbit/s数据传输的调制解调器 |
China National Standards 1,6 |
English PDF |
| GB/T 9363-1988 |
Information processing--9-Track， 12.7mm (0.5in) wide magnetictape for information interchange--Format and recording，using group coding at 246 cpmm(6250 cpi) 信息处理 信息交换用9磁道12.7mm(0.5in)磁带成组编码方式246 cpmm (6250 cpi) 的格式及记录 |
China National Standards 1,6 |
English PDF |
| GB/T 7622-1987 |
600/1200 bauds modem standardized for use in the general switched telephone network 在电话自动交换网上使用的标准化600/1200波特调制解调器 |
China National Standards 1,6 |
English PDF |
| GB/T 7422.2-1987 |
16×12， 16×8， 16×4 Dot matrix data set of Mongo-lian characters for information interchange 信息交换用蒙古文16×12、16×8、16×4点阵数据集 |
China National Standards 1,6 |
English PDF |
| GB/T 7422.1-1987 |
16×12， 16×8， 16×4 Dot matrix font set of Mongo-lian characters for information interchange 信息交换用蒙古文16×12、16×8、16×4点阵字模集 |
China National Standards 1,6 |
English PDF |
| GB/T 7399-1987 |
Helical-scan video tape cassette system using 12.65 mm magnetic tape on type VHS VHS 型12.65 mm螺旋扫描盒式磁带录像系统 |
China National Standards 1,6 |
English PDF |
| GB 6281-1986 |
Co-channel interference standards required in the land mobile services (16k0F3E) 陆地移动业务 (16k0F3E)所要求的同波道干扰标准 |
China National Standards 1,6 |
English PDF |
| GB/T 6550-1986 |
Information processing -- 9-Track，127mm wide magnetic tape for information interchange recorded at 63rpmm， phase encoded 信息处理交换用9磁道12.7毫米宽63行/毫米调相制记录磁带 |
China National Standards 1,6 |
English PDF |
| GB/T 5874-1986 |
Image produced by camera aperture type W on 16mm motion-picture film--Position and dimensions 16mm W型电影摄影机片窗所形成的画面位置和尺寸 |
China National Standards 1,6 |
English PDF |
| GB/T 4642-1984 |
Image produced by 16mm motion-picture camera aperture--Position and dimensions 16mm电影摄影机片窗在胶片上所形成的影象位置和尺寸 |
China National Standards 1,6 |
English PDF |
| Find out:389Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
