China National Standards

China CC GB Standards List

  •  China "CC" GB Standards List:
    • Standard  Code Standard Title Standard Class Order
    GB/T 41218-2021 Bank branches -- Specification for aCCessibility environment construction
    银行营业网点? 无障碍环境建设规范    		 China National Standards
    CC
    English PDF
    GB 9706.202-2021 Medical electrical equipment—Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical aCCessories
    医用电气设备 第2-2部分：高频手术设备及高频附件的基本安全和基本性能专用要求    		 China National Standards
    CC
    English PDF
    GB/T 1037-2021 Test method for water vapor transmission of plastic film and sheet—DesiCCant method and water method
    塑料薄膜与薄片水蒸气透过性能测定 杯式增重与减重法    		 China National Standards
    CC
    English PDF
    GB/T 40887.1-2021 Wheelchair containment and oCCupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers—Part 1:Systems for rearward-facing wheelchair seated passengers
    无障碍客车的轮椅车及乘坐者限位系统 第1部分：后向式轮椅车乘坐者系统    		 China National Standards
    CC
    English PDF
    GB/T 40672-2021 Clinical laboratory testing—Criteria for aCCeptable lots of dehydrated Mueller-Hinton agar and broth for antimicrobial susceptibility testing
    临床实验室检验 抗菌剂敏感试验脱水MH琼脂和肉汤可接受批标准    		 China National Standards
    CC
    English PDF
    GB/T 19361-2021 Wire electrical discharge machines(unidirectional traveling type)—Testing of the aCCuracy
    电火花线切割机床（单向走丝型） 精度检验    		 China National Standards
    CC
    English PDF
    GB/T 40815.4-2021 Mechanical structures for electrical and electronic equipment—Thermal managementfor cabinets in aCCordance with inch and metric system—Part 4:Cooling performance tests for water supplied heat exchangers in electronic cabinets
    电气和电子设备机械结构　符合英制系列和公制系列机柜的热管理　第4部分：电子机柜中供水热交换器的冷却性能试验    		 China National Standards
    CC
    English PDF
    GB/T 40815.2-2021 Mechanical structures for electrical and electronic equipment—Thermal management for cabinets in aCCordance with inch and metric system—Part 2:Method for the determination of forced air cooling
    电气和电子设备机械结构　符合英制系列和公制系列机柜的热管理　第2部分：强迫风冷的确定方法    		 China National Standards
    CC
    English PDF
    GB/T 40734-2021 Non-destructive testing of welds—Phased array ultrasonic testing(PAUT)—ACCeptance levels
    焊缝无损检测 相控阵超声检测 验收等级    		 China National Standards
    CC
    English PDF
    GB/T 40777-2021 Requirements for automatic reclosing devices (ARDs) for circuit-breakers,RCBOs and RCCBs for household and similar uses
    家用及类似用途断路器、RCCB、RCBO自动重合闸电器（ARD）的一般要求    		 China National Standards
    CC
    English PDF
    GB/T 19334-2021 Dimensions of low-voltage switchgear and controlgear—Standardized mounting on rails for mechanical support of switchgear,controlgear and aCCessories
    低压开关设备和控制设备的尺寸 在开关设备和控制设备及其附件中作机械支承的标准安装轨    		 China National Standards
    CC
    English PDF
    GB/T 40695-2021 Information technology—Telecommunications and information exchange between systems—Wireless network aCCess requirements based on IPv6
    信息技术 系统间远程通信和信息交换 基于IPv6的无线网络接入要求    		 China National Standards
    CC
    English PDF
    GB/T 40632-2021 The determination for polysaCCharides in bamboo leaves
    竹叶中多糖的检测方法    		 China National Standards
    CC
    English PDF
    GB/T 30845.2-2021 Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems)—Part 2: Dimensional compatibility and interchangeability requirements for aCCessories to be used by various types of ships
    高压岸电连接系统(HVSC系统)用插头、插座和船用耦合器　第2部分：不同类型的船舶用附件的尺寸兼容性和互换性要求    		 China National Standards
    CC
    English PDF
    GB/T 40590-2021 Specification for operation and maintenance management of electron aCCelerator facility for radiation processing
    辐射加工用电子加速器装置运行维护管理通用规范    		 China National Standards
    CC
    English PDF
    GB/T 39560.8-2021 Determination of certain substances in electrical and electronic products—Part 8:Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermaldesorption aCCessory (Py/TD-GC-MS)
    电子电气产品中某些物质的测定 第8部分：气相色谱-质谱法（GC-MS）与配有热裂解/热脱附的气相色谱-质谱法 （Py/TD-GC-MS）测定聚合物中的邻苯二甲酸酯    		 China National Standards
    CC
    English PDF
    GB/T 40625-2021 Indoor measurement methods for noise emitted by aCCelerating motor vehicles
    汽车加速行驶车外噪声室内测量方法    		 China National Standards
    CC
    English PDF
    GB/T 40779-2021 Information technology—Telecommunications and information exchange between systems—Low-voltage power line communication protocol for urban street light aCCess
    信息技术 系统间远程通信和信息交换 应用于城市路灯接入的低压电力线通信协议    		 China National Standards
    CC
    English PDF
    GB/T 40785-2021 Information technology—Technical requirements of urban street light aCCess control system
    信息技术 城市路灯接入控制系统技术要求    		 China National Standards
    CC
    English PDF
    GB/T 38624.2-2021 Internet of things—Gateway—Part 2: Technical requirements of gateway aCCessing the public telecommunication network
    物联网 网关 第2部分：面向公用电信网接入的网关技术要求    		 China National Standards
    CC
    English PDF
    GB/T 40421-2021 Health informatics—Messages and communication—Web aCCess to DICOM persistent objects
    健康信息学 消息与通信 DICOM持久对象的网络访问    		 China National Standards
    CC
    English PDF
    GB 7300.501-2021 Feed additives—Part 5:Live microorganisms—SaCCharomyces cerevisiae
    饲料添加剂 第5部分：微生物 酿酒酵母    		 China National Standards
    CC
    English PDF
    GB 55019-2021 General Code for ACCessibility in Building and Municipal Engineering
    建筑与市政工程无障碍通用规范    		 China National Standards
    CC
    English PDF
    GB 51440-2021 Standard for construction and aCCeptance of cold store
    冷库施工及验收标准    		 China National Standards
    CC
    English PDF
    GB/T 39205-2020 Information security technology—Light-weight authentication and aCCess control mechanism
    信息安全技术 轻量级鉴别与访问控制机制    		 China National Standards
    CC
    English PDF
    GB/T 39093-2020 Heat aCCumulation storage test method for dangerous goods
    危险品热积累储存试验方法    		 China National Standards
    CC
    English PDF
    GB/T 39079-2020 Inspection and test specifications of large-scale amusement device—ACCeleration test
    大型游乐设施检验检测 加速度测试    		 China National Standards
    CC
    English PDF
    GB/T 29639-2020 Guidelines for enterprises to develop emergency response plan for work place aCCidents
    生产经营单位生产安全事故应急预案编制导则    		 China National Standards
    CC
    English PDF
    GB/T 21965-2020 Steel wire ropes—Vocabulary for aCCeptance and defect
    钢丝绳 验收及缺陷术语    		 China National Standards
    CC
    English PDF
    GB/T 38637.2-2020 Internet of things—ACCess of sensing and controlling device—Part 2:Data management requirements
    物联网 感知控制设备接入 第2部分：数据管理要求    		 China National Standards
    CC
    English PDF
    GB/T 38876-2020 Test method for aCCess network equipment—10Gbit/s ethernet passive optical network (10G EPON)
    接入网设备测试方法 10Gbit/s以太网无源光网络（10G EPON）    		 China National Standards
    CC
    English PDF
    GB/T 39028-2020 Textile machinery and aCCessories—Web roller cards—Terms and definitions
    纺织机械与附件 罗拉式梳理成网机 术语和定义    		 China National Standards
    CC
    English PDF
    GB/T 39044-2020 ACCess specification of government service platform
    政务服务平台接入规范    		 China National Standards
    CC
    English PDF
    GB/T 38829-2020 Technical requirements for IPTV media delivery system—Content aCCess
    IPTV媒体交付系统技术要求 内容接入    		 China National Standards
    CC
    English PDF
    GB/T 24051-2020 Environmental management—Material flow cost aCCounting—General framework
    环境管理 物质流成本核算 通用框架    		 China National Standards
    CC
    English PDF
    GB/T 38641-2020 Information technology—Telecommunications and information exchange between systems—Media aCCess control and physical layer specifications for low power wide area network
    信息技术 系统间远程通信和信息交换 低功耗广域网媒体访问控制层和物理层规范    		 China National Standards
    CC
    English PDF
    GB/T 38637.1-2020 Internet of things—ACCess of sensing and controlling device—Part 1: General requirements
    物联网 感知控制设备接入 第1部分：总体要求    		 China National Standards
    CC
    English PDF
    GB/T 38798-2020 Technical requirements for security of integrated broadband aCCess network
    综合宽带接入网安全技术要求    		 China National Standards
    CC
    English PDF
    GB/T 38624.1-2020 Internet of things—Gateway—Part 1：Gateway technology requirements for aCCess of sensing device
    物联网 网关 第1部分：面向感知设备接入的网关技术要求    		 China National Standards
    CC
    English PDF
    GB/T 16857.901-2020 Geometrical product specifications (GPS)—ACCeptance and reverification tests for coordinate measuring machines (CMM)—Part 901: CMMs with multiple imaging probing system
    产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第901部分：配置多影像探测系统的坐标测量机    		 China National Standards
    CC
    English PDF
    GB/T 12706.4-2020 Power cables with extruded insulation and their aCCessories for rated voltages from l kV (Um=1.2 kV) up to 35 kV(Um=40.5 kV)—Part 4:Test requirements on accessories for cables with rated voltages from 6 kV(Um=7.2 kV) up to 35 kV(Um=40.5 kV)
    额定电压1kV(Um=1.2kV)到35kV(Um=40.5kV)挤包绝缘电力电缆及附件 第4部分:额定电压6kV(Um=7.2kV)到35kV(Um=40.5kV)电力电缆附件试验要求    		 China National Standards
    CC
    English PDF
    GB/T 12706.3-2020 Power cables with extruded insulation and their aCCessories for rated voltages from 1kV (Um=1.2kV) up to 35kV (Um=40.5kV)—Part 3: Cables for rated voltages of 35kV(Um=40.5kV)
    额定电压1kV(Um=1.2 kV)到35kV(Um=40.5 kV)挤包绝缘电力电缆及附件 第3部分：额定电压35kV(Um=40.5kV)电缆    		 China National Standards
    CC
    English PDF
    GB/T 12706.2-2020 Power cables with extruded insulation and their aCCessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 2: Cables for rated voltages from 6 kV(Um=7.2 kV) up to 30 kV(Um=36 kV)
    额定电压1 kV(Um=1.2 kV)到35 kV(Um=40.5 kV)挤包绝缘电力电缆及附件 第2部分：额定电压6 kV(Um=7.2kV)到30 kV(Um=36 kV)电缆    		 China National Standards
    CC
    English PDF
    GB/T 12706.1-2020 Power cables with extruded insulation and their aCCessories for rated voltages from 1 kV (Um=1.2 kV) up to 35 kV (Um=40.5 kV)—Part 1: Cables for rated voltage of 1 kV(Um=1.2 kV)and 3 kV(Um=3.6 kV)
    额定电压1 kV(Um=1.2 kV)到35 kV(Um=40.5 kV)挤包绝缘电力电缆及附件 第1部分：额定电压1 kV(Um=1.2 kV)和3 kV(Um=3.6 kV)电缆    		 China National Standards
    CC
    English PDF
    GB/T 17989.3-2020 Control charts--Part 3: ACCeptance control charts
    控制图 第3部分：验收控制图    		 China National Standards
    CC
    English PDF
    GB/T 38544-2020 Specification for application and aCCeptance of administrative license items
    行政许可申请与受理规范    		 China National Standards
    CC
    English PDF
    GB/T 45001-2020 OCCupational health and safety management systems—Requirements with guidance for use
    职业健康安全管理体系 要求及使用指南    		 China National Standards
    CC
    English PDF
    GB/T 51420-2020 Code for Commissioning and ACCeptance of Smart substation
    智能变电站工程调试及验收标准    		 China National Standards
    CC
    English PDF
    GB 50205-2020 Standard for aCCeptance of construction quality of steel structures
    钢结构工程施工质量验收标准    		 China National Standards
    CC
    English PDF
    GB 9706.201-2020 Medical electrical equipment—Part 2-1: Particular requirements for the basic safety and essential performance of electron aCCelerators in the range 1 MeV to 50 MeV
    医用电气设备 第2-1部分：能量为1MeV至50MeV电子加速器基本安全和基本性能专用要求    		 China National Standards
    CC
    English PDF
    GB/T 39577-2020 Technical requirements for aCCess network—10-Gigabit-capable passive optical networks (XG-PON)
    接入网技术要求 10Gbit/s无源光网络（XG-PON）    		 China National Standards
    CC
    English PDF
    GB/T 31489.4-2020 D.C. extruded cables systems for power transmission at a rated voltage up to and including 500kV—Part 4: ACCessories for D.C. cables
    额定电压500kV及以下直流输电用挤包绝缘电力电缆系统 第4部分：直流电缆附件    		 China National Standards
    CC
    English PDF
    GB/T 18779.6-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the aCCeptance and rejection of instruments and workpieces
    产品几何技术规范（GPS） 工件与测量设备的测量检验 第6部分：仪器和工件接受/拒收的通用判定规则    		 China National Standards
    CC
    English PDF
    GB/T 39613-2020 Specifications for quality inspection and aCCeptance of geographic conditions monitoring achievements
    地理国情监测成果质量检查与验收    		 China National Standards
    CC
    English PDF
    GB/T 18647-2020 Diagnostic techniques for animal coCCidiosis
    动物球虫病诊断技术    		 China National Standards
    CC
    English PDF
    GB/T 19004-2020 Quality management—Quality of an organization—Guidance to achieve sustained suCCess
    质量管理 组织的质量 实现持续成功指南    		 China National Standards
    CC
    English PDF
    GB/T 17888.4-2020 Safety of machinery—Permanent means of aCCess to machinery—Part 4: Fixed ladders
    机械安全 接近机械的固定设施 第4部分：固定式直梯    		 China National Standards
    CC
    English PDF
    GB/T 17888.3-2020 Safety of machinery—Permanent means of aCCess to machinery—Part 3: Stairs, stepladders and guard-rails
    机械安全 接近机械的固定设施 第3部分：楼梯、阶梯和护栏    		 China National Standards
    CC
    English PDF
    GB/T 17888.2-2020 Safety of machinery—Permanent means of aCCess to machinery—Part 2: Working platforms and walkways
    机械安全 接近机械的固定设施 第2部分：工作平台与通道    		 China National Standards
    CC
    English PDF
    GB/T 17888.1-2020 Safety of machinery—Permanent means of aCCess to machinery—Part 1: Choice of fixed means and general requirements of access
    机械安全 接近机械的固定设施 第1部分：固定设施的选择及接近的一般要求    		 China National Standards
    CC
    English PDF
    GB/T 12787-2020 Radiation protection instrumentation—Warning equipment for criticality aCCidents
    辐射防护仪器 临界事故报警设备    		 China National Standards
    CC
    English PDF
    GB/T 10963.2-2020 Electrical aCCessories—Circuit-breakers for overcurrent protection for household and similar installations—Part 2: Circuit-breakers for AC and DC operation
    电气附件 家用及类似场所用过电流保护断路器 第2部分：用于交流和直流的断路器    		 China National Standards
    CC
    English PDF
    GB/T 10963.1-2020 Electrical aCCessories—Circuit-breakers for overcurrent protection for household and similar installations—Part 1: Circuit-breakers for a.c. operation
    电气附件 家用及类似场所用过电流保护断路器 第1部分：用于交流的断路器    		 China National Standards
    CC
    English PDF
    GB/T 39424.2-2020 Road vehicles—Traffic aCCident analysis—Part 2: Guidelines for the use of impact severity measures
    道路车辆 交通事故分析 第2部分：碰撞严重度测量方法使用指南    		 China National Standards
    CC
    English PDF
    GB/T 39424.1-2020 Road vehicles—Traffic aCCident analysis—Part 1: Vocabulary
    道路车辆 交通事故分析 第1部分：术语    		 China National Standards
    CC
    English PDF
    GB/T 39423-2020 Road vehicles—Collection of aCCident data for evaluation of occupant restraint performance
    道路车辆 评价乘员约束性能的事故数据收集    		 China National Standards
    CC
    English PDF
    GB/T 28029.11-2020 Electronic railway equipment—Train communication network(TCN)—Part 3-3:CANopen Consist Network（CCN）
    轨道交通电子设备 列车通信网络（TCN） 第3-3部分：CANopen编组网（CCN）    		 China National Standards
    CC
    English PDF
    GB/T 50185-2019 Code for aCCeptance of construction quality of industrial equipment and pipeline insulation engineering
    工业设备及管道绝热工程施工质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 50377-2019 Standard for installation and aCCeptance of mechanical equipment in metallurgical mine
    矿山机电设备工程安装及验收标准    		 China National Standards
    CC
    English PDF
    GB/T 50402-2019 Standard for engineering installation aCCeptance of sintering mechanical equipment
    烧结机械设备工程安装验收标准    		 China National Standards
    CC
    English PDF
    GB/T 50561-2019 Standard for equipment installing and aCCeptance of building material industry
    建材工业设备安装工程施工及验收标准    		 China National Standards
    CC
    English PDF
    GB 50166-2019 Code for installation and aCCeptance of fire alarm system
    火灾自动报警系统施工及验收标准    		 China National Standards
    CC
    English PDF
    GB/T 51360-2019 Standard for engineering construction and aCCeptance of open-pit mental mine
    金属露天矿工程施工及验收标准    		 China National Standards
    CC
    English PDF
    GB 51392-2019 Standard for construction and quality aCCeptance of light emitting diode manufacturing equipment installation engineering
    发光二极管生产工艺设备安装工程施工及质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 51380-2019 Technical standard for broadban optical fiber aCCess engieering
    宽带光纤接入工程技术标准    		 China National Standards
    CC
    English PDF
    GB 51378-2019 Standard for aCCeptance of high voltage DC power supply system engineering for telecommunication
    通信高压直流电源系统工程验收标准    		 China National Standards
    CC
    English PDF
    GB 50411-2019 Standard for aCCeptance of enery efficient building construction
    建筑节能工程施工质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 13295-2019 Ductile iron pipes, fittings and aCCessories for water or gas applications [Including 2021XG1]
    水及燃气用球墨铸铁管、管件和附件    		 China National Standards
    CC
    English PDF
    GB/T 38322-2019 Information technology—Information device interconnection—Interface requirements between third-party smart home electric system and general terminal aCCess service platform
    信息技术 信息设备互连 第三方智能家用电子系统与终端统一接入服务平台接口要求    		 China National Standards
    CC
    English PDF
    GB/T 38320-2019 Information technology—Information device interconnection—Interface requirements between smart home electric system terminals and general terminal aCCess service platform
    信息技术 信息设备互连 智能家用电子系统终端设备与终端统一接入服务平台接口要求    		 China National Standards
    CC
    English PDF
    GB/T 38280-2019 Cable management systems—Specifications for conduit fittings and aCCessories for cable installations for extra heavy duty electrical steel conduit
    电缆管理系统 超重荷型刚性电气导管电缆装置用导管配件和附件的规范    		 China National Standards
    CC
    English PDF
    GB/T 38269-2019 Corrosion of metals and alloys—ACCelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity
    金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润    		 China National Standards
    CC
    English PDF
    GB/T 22079-2019 HV polymeric insulators for indoor and outdoor use—General definitions ,test methods and aCCeptance criteria
    户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则    		 China National Standards
    CC
    English PDF
    GB/T 17466.1-2019 Boxes and enclosures for electrical aCCessories for household and similar fixed electrical installations—Part 1:General requirements
    家用和类似用途固定式电气装置的电器附件安装盒和外壳 第1部分:通用要求    		 China National Standards
    CC
    English PDF
    GB/T 15000.4-2019 Directives for the work of reference materials—Part 4：Contents of certificates,labels and aCCompanying documentation
    标准样品工作导则 第4部分：证书、标签和附带文件的内容    		 China National Standards
    CC
    English PDF
    GB/T 13295-2019 Ductile iron pipes,fitting and aCCessories for water or gas applications
    水及燃气用球墨铸铁管、管件和附件    		 China National Standards
    CC
    English PDF
    GB/T 38425.2-2019 Textile machinery and aCCessories—Flat steel healds with closed end loops—Part 2：Dimensions of healds manufactured of hardened strip steel
    纺织机械与附件 闭口综耳钢片综 第2部分：淬火钢带钢片综的尺寸    		 China National Standards
    CC
    English PDF
    GB/T 38422-2019 Textile machinery and aCCessories—Circular knitting machines—Vocabulary
    纺织机械与附件 圆型针织机 词汇    		 China National Standards
    CC
    English PDF
    GB/T 38399.3-2019 Textile machinery and aCCessories—Vocabulary of flat warp knitting machines—Part 3: Patterning devices
    纺织机械与附件 平型经编机词汇 第3部分：提花装置    		 China National Standards
    CC
    English PDF
    GB/T 38417-2019 Textile machinery and aCCessories—Bars for drop wires for electrical warp stop motions
    纺织机械与附件 电子经停装置用停经杆    		 China National Standards
    CC
    English PDF
    GB/T 38399.4-2019 Textile machinery and aCCessories—Vocabulary of flat warp knitting machines—Part 4: Stitch bonding machines and stitch bonding devices
    纺织机械与附件 平型经编机词汇 第4部分：缝编机和缝编装置    		 China National Standards
    CC
    English PDF
    GB/T 38399.2-2019 Textile machinery and aCCessories—Vocabulary of flat warp knitting machines—Part 2: Warp let-off, fabric take-up and batching
    纺织机械与附件 平型经编机词汇 第2部分：送经、织物牵拉和卷取    		 China National Standards
    CC
    English PDF
    GB/T 38399.1-2019 Textile machinery and aCCessories—Vocabulary of flat warp knitting machines—Part 1: Basic structure and knitting elements
    纺织机械与附件 平型经编机词汇 第1部分：基本结构和成圈机件    		 China National Standards
    CC
    English PDF
    GB/T 38392-2019 Metallurgical equipment—Couplings—Test methods,inspecting rules and aCCptance codes
    冶金设备 联轴器 试验方法、 检验规则及验收规范    		 China National Standards
    CC
    English PDF
    GB/T 38355-2019 Matrix quality management mode for suCCess right the first time
    一次成功矩阵式质量管理模式    		 China National Standards
    CC
    English PDF
    GB/T 27011-2019 Conformity assessment—Requirements for aCCreditation bodies accrediting conformity assessment bodies
    合格评定 认可机构要求    		 China National Standards
    CC
    English PDF
    GB/T 18737.2-2019 Textile machinery and aCCessories—Beams for winding—Part 2: Warper’s beams
    纺织机械与附件 经轴 第2部分：整经轴    		 China National Standards
    CC
    English PDF
    GB/T 38322-2019 Information technology—Information device interconnection—Interface requirements between third-party smart home electric system and general terminal aCCess service platform
    信息技术 信息设备互连 第三方智能家用电子系统与终端统一接入服务平台接口要求    		 China National Standards
    CC
    English PDF
    GB/T 38320-2019 Information technology—Information device interconnection—Interface requirements between smart home electric system terminals and general terminal aCCess service platform
    信息技术 信息设备互连 智能家用电子系统终端设备与终端统一接入服务平台接口要求    		 China National Standards
    CC
    English PDF
    GB/T 38269-2019 Corrosion of metals and alloys—ACCelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process—Dry and wet conditions at constant absolute humidity
    金属和合金的腐蚀 含人造海水沉积盐过程的循环加速腐蚀试验 恒定绝对湿度下干燥/湿润    		 China National Standards
    CC
    English PDF
    GB/T 22079-2019 HV polymeric insulators for indoor and outdoor use—General definitions ,test methods and aCCeptance criteria
    户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则    		 China National Standards
    CC
    English PDF
    GB/T 17466.1-2019 Boxes and enclosures for electrical aCCessories for household and similar fixed electrical installations—Part 1:General requirements
    家用和类似用途固定式电气装置的电器附件安装盒和外壳 第1部分:通用要求    		 China National Standards
    CC
    English PDF
    GB/T 15000.4-2019 Directives for the work of reference materials—Part 4：Contents of certificates,labels and aCCompanying documentation
    标准样品工作导则 第4部分：证书、标签和附带文件的内容    		 China National Standards
    CC
    English PDF
    GB/T 13295-2019 Ductile iron pipes,fitting and aCCessories for water or gas applications
    水及燃气用球墨铸铁管、管件和附件    		 China National Standards
    CC
    English PDF
    GB 27887-2011 Restraining devices for child oCCupants of power-driven vehicles
    机动车儿童乘员用约束系统《第1号修改单》    		 China National Standards
    CC
    English PDF
    GB/T 51351-2019 Standard for quality aCCeptance of building slope engineering construction
    建筑边坡工程施工质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 51349-2019 Design standard for oCCupational safety and health in forestry industry engineering
    林产加工工业职业安全卫生设计标准    		 China National Standards
    CC
    English PDF
    GB/T 51317-2019 Unified standard for construction quality aCCeptance of petroleum and natural gas construction engineering
    石油天然气工程施工质量验收统一标准    		 China National Standards
    CC
    English PDF
    GB/T 38021-2019 Analogue quartz clocks—Timing aCCuracy
    指针式石英钟 走时精度    		 China National Standards
    CC
    English PDF
    GB/T 38020.1-2019 Watch-cases and aCCessories—Gold alloy coverings—Part 1:General requirements
    表壳体及其附件 金合金覆盖层 第1部分：一般要求    		 China National Standards
    CC
    English PDF
    GB/T 37977.23-2019 Electrostatics—Part 2-3：Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge aCCumulation
    静电学 第2-3部分：防静电固体平面材料电阻和电阻率的测试方法    		 China National Standards
    CC
    English PDF
    GB/T 37974-2019 General requirements for automatic test system aCCeptance
    自动测试系统验收通用要求    		 China National Standards
    CC
    English PDF
    GB/T 37910.2-2019 Non-destructive testing of welds — ACCeptance levels for radiographic testing — Part 2: Aluminium and its alloys
    焊缝无损检测 射线检测验收等级 第2部分: 铝及铝合金    		 China National Standards
    CC
    English PDF
    GB/T 37910.1-2019 Non-destructive testing of welds—ACCeptance levels for radiographic testing—Part 1:Steel,nickel,titanium and their alloys
    焊缝无损检测 射线检测验收等级 第1部分：钢、镍、钛及其合金    		 China National Standards
    CC
    English PDF
    GB/T 37895-2019 Dimensions of aCCessories for cutter arbors with parallel key and tenon drive
    带平键和端键传动铣刀杆附件的尺寸    		 China National Standards
    CC
    English PDF
    GB/T 37887-2019 Technology speCCifieation for crushing plants remanufacturing
    破碎设备再制造技术导则    		 China National Standards
    CC
    English PDF
    GB/T 37836-2019 Air filter plate made by polylactic acid/polybutylene suCCinate composite
    聚乳酸/聚丁二酸丁二酯复合材料空气过滤板    		 China National Standards
    CC
    English PDF
    GB/T 37723-2019 Information technology—Information device interconnection—General technical requirement for smart home electric system terminal aCCess service platform
    信息技术 信息设备互连 智能家用电子系统终端统一接入服务平台总体技术要求    		 China National Standards
    CC
    English PDF
    GB/T 37668-2019 Information technology—Internet content aCCessibility technical requirements and conformance testing
    信息技术 互联网内容无障碍可访问性技术要求与测试方法    		 China National Standards
    CC
    English PDF
    GB/T 23170-2019 Hair products—Wigs and hair pieces aCCessories
    发制品 假发头套及头饰    		 China National Standards
    CC
    English PDF
    GB/T 21138-2019 TobaCCo seeds
    烟草种子    		 China National Standards
    CC
    English PDF
    GB/T 51374-2019 Standard for electrical installation engineering construction and aCCeptance in explosives and powders atmosphere
    火炸药环境电气安装工程施工及验收标准    		 China National Standards
    CC
    English PDF
    GB/T 51365-2019 ACCeptance standards for network engineering
    网络工程验收标准    		 China National Standards
    CC
    English PDF
    GB/T 36628.3-2019 Information technology－Telecommunications and information exchange between systems－Visible light communication－Part 3：Specification of media aCCess control and physical layer for high-rate visible light communication
    信息技术 系统间远程通信和信息交换 可见光通信 第3部分：高速可见光通信媒体访问控制和物理层规范    		 China National Standards
    CC
    English PDF
    GB/T 36628.2-2019 Information technology－Telecommunications and information exchange between systems－Visible light communication－Part 2：Specification of media aCCess control and physical layer for low-rate and narrowband visible light communication
    信息技术 系统间远程通信和信息交换 可见光通信 第2部分：低速窄带可见光通信媒体访问控制和物理层规范    		 China National Standards
    CC
    English PDF
    GB/T 37357-2019 Cast iron pipes, fittings and aCCessories for rain drainage of building roof
    建筑屋面雨水排水铸铁管、管件及附件    		 China National Standards
    CC
    English PDF
    GB/T 37769-2019 Guide for performance aCCeptance of determinator of coal ash fusibility
    煤灰熔融性测定仪性能验收导则    		 China National Standards
    CC
    English PDF
    GB/T 37708-2019 Quality management—Guidelines for suCCessful data envelopment analysis of product
    质量管理 产品成功数据包络分析指南    		 China National Standards
    CC
    English PDF
    GB/T 37655-2019 ACCeptance specification of building integrated photovoltaic power systems
    光伏与建筑一体化发电系统验收规范    		 China National Standards
    CC
    English PDF
    GB/T 23223-2019 Test method of pesticide efficacy in tobaCCo field
    烟用农药田间药效试验方法    		 China National Standards
    CC
    English PDF
    GB/T 11026.10-2019 Electrical insulating materials—Thermal endurance properties—Part 10: ACCelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy
    电气绝缘材料 耐热性 第10部分：利用分析试验方法加速确定相对耐热指数(RTEA) 基于活化能计算的导则    		 China National Standards
    CC
    English PDF
    GB/T 5959.41-2019 Safety in elCCtroheating installations—Part 41: Particular requirements for resistance heating equipment—Heating and melting glass equipment
    电热装置的安全 第41部分：对电阻加热装置的特殊要求 玻璃加热和熔化装置    		 China National Standards
    CC
    English PDF
    GB/T 37333-2019 General technical specification of aCCessible facilities for railway passenger cars and multiple unit
    铁道客车及动车组无障碍设施通用技术条件    		 China National Standards
    CC
    English PDF
    GB/T 37705-2019 Specification of individual aCCount management for residents old-age insurance
    城乡居民基本养老保险个人账户管理规范    		 China National Standards
    CC
    English PDF
    GB/T 37050-2019 Fastening screw thread gaging systems for aCCeptability
    紧固螺纹检测体系    		 China National Standards
    CC
    English PDF
    GB/T 37437-2019 Frontal airbag—Technical requirements of protection for out of position oCCupant
    正面安全气囊 离位乘员保护技术要求    		 China National Standards
    CC
    English PDF
    GB/T 37434-2019 Packaging—ACCessible design—General requirements
    包装 无障碍设计 一般要求    		 China National Standards
    CC
    English PDF
    GB 37489.2-2019 Hygienic design specification for public places―Part 2：Public aCCommodation
    公共场所设计卫生规范 第2部分：住宿场所    		 China National Standards
    CC
    English PDF
    GB/T 37337-2019 Protection of the oCCupants in the event of a lateral pole collision
    汽车侧面柱碰撞的乘员保护    		 China National Standards
    CC
    English PDF
    GB/T 37303.4-2019 Ships and marine technology—Manoeuvring of ships—Part 4:Stopping, aCCeleration, traversing
    船舶和海上技术 船舶操纵性 第4部分：停船、加速和横移    		 China National Standards
    CC
    English PDF
    GB/T 37159.2-2019 Petroleum drilling and production equipment—Offshore self-elevating drilling unit—Part 2:Construction installation and commissioning aCCeptance
    石油天然气钻采设备 海洋石油自升式钻井平台 第2部分：建造安装与调试验收    		 China National Standards
    CC
    English PDF
    GB/T 20572-2019 Evaluating specification on the HACCP certification of the natural casings processin
    天然肠衣生产HACCP应用规范    		 China National Standards
    CC
    English PDF
    GB/T 37020-2018 Information technology—Telecommunications and information exchange between systems—Local and metropolitan area networks—Specific requirements—Medium aCCess control and physical layer specification for video wireless personal area networks（VPAN
    信息技术-系统间远程通信和信息交换-局域网和城域网-特定要求-面向视频的无线个域网（VPAN）媒体访问控制和物理层规范    		 China National Standards
    CC
    English PDF
    GB/T 51342-2018 Electronic engineering energy-saving construction quality aCCeptance criteria
    电子工程节能施工质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 19520.18-2018 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in aCCordance with IEC 60917-2-1
    电子设备机械结构-482.6-mm(19-in)系列机械结构尺寸-第3-106部分:适用于符合IEC-60917-2-1公制机柜或机架的插箱和机箱的适配尺寸    		 China National Standards
    CC
    English PDF
    GB/T 37093-2018 Information security technology—Security requirements for IoT sensing layer aCCess to communication network
    信息安全技术-物联网感知层接入通信网的安全要求    		 China National Standards
    CC
    English PDF
    GB/T 36960-2018 Information security technology —Authentication and authorization—ACCess control middleware framework and interface
    信息安全技术-鉴别与授权-访问控制中间件框架与接口    		 China National Standards
    CC
    English PDF
    GB/T 37099-2018 Green logistics indicators and aCCounting methods
    绿色物流指标构成与核算方法    		 China National Standards
    CC
    English PDF
    GB/T 37140-2018 Technical requirements aCCeptance specification for inspection and testing laboratory
    检验检测实验室技术要求验收规范    		 China National Standards
    CC
    English PDF
    GB/Z 37085-2018 Industrial communication network—Profiles—Part 3-8: Functional safety communication profile of CC-Link family
    工业通信网络-行规-第3-8部分：CC-LINK系列功能安全通信行规    		 China National Standards
    CC
    English PDF
    GB/T 36938-2018 Textile machinery and aCCessories—Strips for water jet solidification
    纺织机械与附件-水刺机用水射流板    		 China National Standards
    CC
    English PDF
    GB/T 36914.1-2018 Textile machinery and aCCessories—Rings and travellers for ring spinning and ring twisting frames—Part 1:Flange rings T and SF and their travellers
    纺织机械与附件-环锭细纱机和环锭捻线机用钢领和钢丝圈-第1部分：T型和SF型钢领和配用的钢丝圈    		 China National Standards
    CC
    English PDF
    GB/T 37078-2018 Technical specifications for aCCess control system
    出入口控制系统技术要求    		 China National Standards
    CC
    English PDF
    GB/T 5170.16-2018 Inspection methods for environmental testing equipments—Part 16：Centrifugal machines for constant aCCeleration test
    环境试验设备检验方法-第16部分：稳态加速度试验用离心机    		 China National Standards
    CC
    English PDF
    GB/T 18264-2018 ACCeptance generality of the particleboard production line
    刨花板生产线验收通则    		 China National Standards
    CC
    English PDF
    GB/T 37276-2018 Classification and aCCreditation for senior care organization
    养老机构等级划分与评定    		 China National Standards
    CC
    English PDF
    GB/T 51338-2018 Distributed power grid-connected engineering commissioning and aCCeptance criteria
    分布式电源并网工程调试与验收标准    		 China National Standards
    CC
    English PDF
    GB 3847-2018 Limits and measurement methods for emissions form diesel vehicles under free aCCeleration and lugdown cycle
    柴油车污染物排放限值及测量方法（自由加速法及加载减速法）    		 China National Standards
    CC
    English PDF
    GB 50170-2018 Electrical installation engineering - Rotating electrical machine construction and aCCeptance criteria
    电气装置安装工程-旋转电机施工及验收标准    		 China National Standards
    CC
    English PDF
    GB 50168-2018 Electrical installation engineering - cable line construction and aCCeptance criteria
    电气装置安装工程-电缆线路施工及验收标准    		 China National Standards
    CC
    English PDF
    GB/T 37174-2018 Test methods for aCCess network—Interoperability of GPON system
    接入网设备测试方法-GPON系统互通性    		 China National Standards
    CC
    English PDF
    GB/T 37172-2018 Test methods for aCCess network equipment—Interoperability of EPON system
    接入网设备测试方法-EPON系统互通性    		 China National Standards
    CC
    English PDF
    GB/T 37173-2018 Technical requirements for aCCess network－Interoperability of GPON system
    接入网技术要求-GPON系统互通性    		 China National Standards
    CC
    English PDF
    GB/T 37083-2018 Technical requirements for aCCess network—Interoperability of ethernet passive optical network（EPON）system
    接入网技术要求-EPON系统互通性    		 China National Standards
    CC
    English PDF
    GB/T 37081-2018 Technical requirements for aCCess network—10Gbit/s ethernet passive optical network (10G-EPON)
    接入网技术要求-10Gbit/s-以太网无源光网络(10G-EPON)    		 China National Standards
    CC
    English PDF
    GB/T 50224-2018 Construction quality aCCeptance criteria for building anti-corrosion engineering
    建筑防腐蚀工程施工质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 36914.2-2018 Textile machinery and aCCessories—Rings and travellers for ring spinning and ring twisting frames—Part 2: HZ-and J-rings and their travellers
    纺织机械与附件-环锭细纱机和环锭捻线机用钢领和钢丝圈-第2部分：HZ型和J型钢领和配用的钢丝圈    		 China National Standards
    CC
    English PDF
    GB/T 3216-2016/XG1-2018 Rotodynamic pumps—Hydraulic performance aCCeptance tests—Grades 1,2 and 3
    《回转动力泵-水力性能验收试验-1级、2级和3级》国家标准第1号修改单    		 China National Standards
    CC
    English PDF
    GB/T 50374-2018 Communication pipeline engineering construction and aCCeptance criteria
    通信管道工程施工及验收标准    		 China National Standards
    CC
    English PDF
    GB/T 50252-2018 Uniform standard for construction quality aCCeptance of industrial installation engineering
    工业安装工程施工质量验收统一标准    		 China National Standards
    CC
    English PDF
    GB/T 51311-2018 Wind and light storage combined power station commissioning and aCCeptance criteria
    风光储联合发电站调试及验收标准    		 China National Standards
    CC
    English PDF
    GB/T 37220-2018 Rubber hose assemblies with large diameter—ACCelerated fatigue test
    大型橡胶软管组合件-加速疲劳试验    		 China National Standards
    CC
    English PDF
    GB/T 51265-2018 Cable TV network engineering construction and aCCeptance criteria
    有线电视网络工程施工与验收标准    		 China National Standards
    CC
    English PDF
    GB/T 51281-2018 Synchronous Digital Hierarchy (SDH) Optical Fiber Transmission System Engineering ACCeptance Criteria
    同步数字体系（SDH）光纤传输系统工程验收标准    		 China National Standards
    CC
    English PDF
    GB/T 51277-2018 Mine shaft freezing method construction and quality aCCeptance criteria
    矿山立井冻结法施工及质量验收标准    		 China National Standards
    CC
    English PDF
    GB 50210-2018 Building decoration and decoration project quality aCCeptance criteria
    建筑装饰装修工程质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 17248.5-2018 Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions applying aCCurate environmental corrections
    声学-机器和设备发射的噪声-采用准确环境修正测定工作位置和其他指定位置的发射声压级    		 China National Standards
    CC
    English PDF
    GB 1903.38-2018 National Food Safety Standard - Food Nutrition Enhancer - Ferrous SuCCinate
    食品安全国家标准-食品营养强化剂-琥珀酸亚铁    		 China National Standards
    CC
    English PDF
    GB/T 51288-2018 Mine inclined shaft freezing method construction and quality aCCeptance criteria
    矿山斜井冻结法施工及质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 50299-2018 Construction quality aCCeptance criteria for underground railway projects [two volumes]
    地下铁道工程施工质量验收标准[两册]    		 China National Standards
    CC
    English PDF
    GB/T 50381-2018 Urban Rail Transit Automatic Ticket Inspection System Engineering Quality ACCeptance Standard
    城市轨道交通自动售检票系统工程质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 50643-2018 Rubber factory oCCupational safety and health design standards
    橡胶工厂职业安全卫生设计标准    		 China National Standards
    CC
    English PDF
    GB/T 50551-2018 Pellet mechanical equipment engineering installation and quality aCCeptance criteria
    球团机械设备工程安装及质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 50578-2018 Urban rail transit signal engineering construction quality aCCeptance criteria
    城市轨道交通信号工程施工质量验收标准    		 China National Standards
    CC
    English PDF
    GB 50202-2018 Construction quality aCCeptance criteria for building foundation engineering
    建筑地基基础工程施工质量验收标准    		 China National Standards
    CC
    English PDF
    GB/T 36469-2018 Information technology—Telecommunications and information exchange between systems local and metropolitan area networks—Specific requirements—Medium aCCess control (MAC) and physical layer (PHY) specification for Q frequency band ultra high speed wi
    信息技术 系统间远程通信和信息交换局域网和城域网 特定要求 Q波段超高速无线局域网媒体访问控制和物理层规范    		 China National Standards
    CC
    English PDF
    GB/T 10089-2018 ACCuracy of cylindrical worm and wormwheel
    圆柱蜗杆、蜗轮精度    		 China National Standards
    CC
    English PDF
    GB/T 35093-2018 CNC straight-side link-drive press—ACCuracy
    数控闭式多连杆压力机 精度    		 China National Standards
    CC
    English PDF
    GB/T 36474-2018 Semiconductor integrated circuit—Measuring methods for double data rate 3 synchronous dynamic random aCCess memory(DDR3 SDRAM)
    半导体集成电路 第三代双倍数据速率同步动态随机存储器 (DDR3 SDRAM)测试方法    		 China National Standards
    CC
    English PDF
    GB/Z 36471-2018 Information technology—Guidelines for the design of icons and symbols aCCessible to all users, including the elderly and persons with disabilities
    信息技术 包括老年人和残疾人的所有用户可访问的图标和符号设计指南    		 China National Standards
    CC
    English PDF
    GB/T 17982-2018 Models and parameters for calculating radiation doses to the public in the emergency of a nuclear aCCident
    核事故应急情况下公众受照剂量估算的模式和参数    		 China National Standards
    CC
    English PDF
    GB/T 22140-2018 Code for field aCCeptance test of small hydro turbines
    小型水轮机现场验收试验规程    		 China National Standards
    CC
    English PDF
    GB/T 21678-2018 Calculating methods on the economic loss of fishery pollution aCCidents
    渔业污染事故经济损失计算方法    		 China National Standards
    CC
    English PDF
    GB/T 21671-2018 Ethernet technology based local area network(LAN) systems aCCeptance test methods
    基于以太网技术的局域网（LAN）系统验收测试方法    		 China National Standards
    CC
    English PDF
    GB/T 36454-2018 Information technology—Telecommunications and information exchange between systems—Medium aCCess control and physical layer specifications for middle-high throughput wireless local area network
    信息技术 系统间远程通信和信息交换 中高速无线局域网媒体访问控制和物理层规范    		 China National Standards
    CC
    English PDF
    GB/T 29265.404-2018 Information technology—Information device intelligent grouping and resource sharing—Part 404: Remote aCCess management profile
    信息技术 信息设备资源共享协同服务 第404部分：远程访问管理应用框架    		 China National Standards
    CC
    English PDF
    GB/T 36458-2018 Information technology—Customer premises cabling for wireless aCCess points
    信息技术 无线接入点的用户建筑群布缆    		 China National Standards
    CC
    English PDF
    GB/T 36425-2018 Watch-cases and aCCessories—Colour range and designations of gold alloy coverings
    表壳体及其附件 金合金覆盖层的颜色范围和名称    		 China National Standards
    CC
    English PDF
    GB/T 36361-2018 ACCelerated life test method for LED
    LED加速寿命试验方法    		 China National Standards
    CC
    English PDF
    GB/T 36340-2018 General specification for raised aCCess floor for electrostatic protection
    防静电活动地板通用规范    		 China National Standards
    CC
    English PDF

    Find out:500Items   |  To Page of: First -Previous-Next -Last  | 1 2 3

    　

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.gbstandards.org
    China National Standards