Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 33630-2017 |
Offshore wind turbine generator systems—Specification for CORRosion protection 海上风力发电机组 防腐规范 |
China National Standards CORR |
 English PDF |
| GB/T 5170.11-2017 |
Inspection methods for environmental testing equipments—Part 11: CORRosive gas testing equipments 环境试验设备检验方法 第11部分：腐蚀气体试验设备 |
China National Standards CORR |
English PDF |
| GB/T 35530-2017 |
Gas mixtures—Gravimetric preparation—Mastering CORRelations in composition 混合气体 称量制备 组分相关性控制 |
China National Standards CORR |
English PDF |
| GB/T 35172-2017 |
Determination of CORRosion resistance of refractories for cement kilns to CMSW 水泥窑用耐火材料抗生活垃圾预处理可燃物侵蚀性试验方法 |
China National Standards CORR |
English PDF |
| GB/T 35490-2017 |
Anti-CORRosion technology of prestressed concrete cylinder pipe 预应力钢筒混凝土管防腐蚀技术 |
China National Standards CORR |
English PDF |
| GB/T 35491-2017 |
CORRosion inhibitor—Volatile corrosion inhibitor 缓蚀剂 气相缓蚀剂 |
China National Standards CORR |
English PDF |
| GB/T 35509-2017 |
Application and evaluation of CORRosion inhibitors in oil and gas fields 油气田缓蚀剂的应用和评价 |
China National Standards CORR |
English PDF |
| GB/T 35451.1-2017 |
Polypropylene(PP) structure-wall piping systems for underground drainage and sewerage—Part 1：Polypropylene double wall CORRugated pipes 埋地排水排污用聚丙烯（PP）结构壁管道系统 第1部分：聚丙烯双壁波纹管材 |
China National Standards CORR |
English PDF |
| GB/T 35499-2017 |
Code for quality and technology of antiCORRosive construction with furan resin 呋喃树脂耐蚀作业质量技术规范 |
China National Standards CORR |
English PDF |
| GB/T 33423-2016 |
Technical specification for antiCORRosion of wind turbines in the coastal and offshore area 沿海及海上风电机组防腐技术规范 |
China National Standards CORR |
English PDF |
| GB/T 33383-2016 |
Technical specification for anti-CORRosion on concrete/reinforced concrete structures using corrosion-resistant modified polyvinyl chloride (HFVC) structural adhesive and cement 耐蚀改性聚氯乙烯（HFVC）结构胶及胶泥防腐技术规范 |
China National Standards CORR |
English PDF |
| GB/T 33373-2016 |
AntiCORRision—Electrochemical protection—Terminology 防腐蚀 电化学保护 术语 |
China National Standards CORR |
English PDF |
| GB/T 33314-2016 |
CORRosion control engineering life cycle—General requirements 腐蚀控制工程生命周期 通用要求 |
China National Standards CORR |
English PDF |
| GB/T 32998-2016 |
Surface chemical analysis—Auger electron spectroscopy—Reporting of methods used for charge control and charge CORRection 表面化学分析 俄歇电子能谱 荷电控制与校正方法报告的规范要求 |
China National Standards CORR |
English PDF |
| GB/T 32977-2016 |
Hot rolled improved CORRosion resisting steel sections 改善耐蚀性能热轧型钢 |
China National Standards CORR |
English PDF |
| GB/T 15260-2016 |
CORRosion of metals and alloys—Test methods for intergranular corrosion of nickel alloys 金属和合金的腐蚀 镍合金晶间腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 32721-2016 |
Effects of pollutants on myCORRhizal fungi—Spore germination test 污染物对菌根真菌的影响 孢子萌发试验 |
China National Standards CORR |
English PDF |
| GB/T 32613-2016 |
Determination of chlorhydrocaobon contents in CORRection stationery—Gas chromatographic method 涂改类文具中氯代烃的测定 气相色谱法 |
China National Standards CORR |
English PDF |
| GB/T 32571-2016 |
CORRosion of metals and alloys—Corrosion test for intergranular corrosion susceptibility of high—Cr ferritic stainless steels 金属和合金的腐蚀 高铬铁素体不锈钢晶间腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 32550-2016 |
CORRosion of metals and alloys—Determination of the critical pitting temperature under potentiostatic control 金属和合金的腐蚀 恒电位控制下的临界点蚀温度测定 |
China National Standards CORR |
English PDF |
| GB/T 17897-2016 |
CORRosion of metals and alloys—Corrosion test for pitting corrosion resistance of stainless steels in the ferric chloride solution 金属和合金的腐蚀 不锈钢三氯化铁点腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 32508-2016 |
Quantitative determination of CORRosive sulfur (dibenzyl disulfide , DBDS) in insulating liquids 绝缘油中腐蚀性硫（二苄基二硫醚）定量检测方法 |
China National Standards CORR |
English PDF |
| GB/T 19355.3-2016 |
Zinc coatings—Guidelines and recommendations for the protection against CORRosion of iron and steel in structures—Part 3: Sherardizing 锌覆盖层 钢铁结构防腐蚀的指南和建议 第3部分：粉末渗锌 |
China National Standards CORR |
English PDF |
| GB/T 19355.2-2016 |
Zinc coatings—Guidelines and recommendations for the protection against CORRosion of iron and steel in structures—Part 2: Hot dip galvanizing 锌覆盖层 钢铁结构防腐蚀的指南和建议 第2部分：热浸镀锌 |
China National Standards CORR |
English PDF |
| GB/T 19355.1-2016 |
Zinc coatings—Guidelines and recommendations for the protection against CORRosion of iron and steel in structures—Part 1: General principles of design and corrosion resistance 锌覆盖层 钢铁结构防腐蚀的指南和建议 第1部分：设计与防腐蚀的基本原则 |
China National Standards CORR |
English PDF |
| GB/Z 32458-2015 |
Centrifugal pumps handling viscous liquids—Performance CORRections 输送粘性液体的离心泵 性能修正 |
China National Standards CORR |
English PDF |
| GB/T 9989.5-2015 |
Vitreous and porcelain enamels—Determination of resistance to chemical CORRosion—Part 5: Determination of resistance to chemical corrosion in closed systems 搪瓷耐化学侵蚀的测定 第5部分：在封闭系统中耐化学侵蚀的测定 |
China National Standards CORR |
English PDF |
| GB/T 9989.4-2015 |
Vitreous and porcelain enamels—Determination of resistance to chemical CORRosion—Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel 搪瓷耐化学侵蚀的测定 第4部分：用圆柱形容器进行耐碱溶液侵蚀的测定 |
China National Standards CORR |
English PDF |
| GB/T 9989.3-2015 |
Vitreous and porcelain enamels—Determination of resistance to chemical CORRosion—Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel 搪瓷耐化学侵蚀的测定 第3部分：用六角形容器进行耐碱溶液侵蚀的测定 |
China National Standards CORR |
English PDF |
| GB/T 9989.2-2015 |
Vitreous and porcelain enamels—Determination of resistance to chemical CORRosion—Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours 搪瓷耐化学侵蚀的测定 第2部分：耐沸腾酸、沸腾中性液体及其蒸气化学侵蚀的测定 |
China National Standards CORR |
English PDF |
| GB/T 9989.1-2015 |
Vitreous and porcelain enamels—Determination of resistance to chemical CORRosion—Part 1: Determination of resistance to chemical corrosion by acids at room temperature 搪瓷耐化学侵蚀的测定 第1部分：室温下耐酸侵蚀的测定 |
China National Standards CORR |
English PDF |
| GB/T 5169.36-2015 |
Fire hazard testing for electric and electronic products—Part 36: CORRosion damage effects of fire effluent—Summary and relevance of test methods 电工电子产品着火危险试验 第36部分：燃烧流的腐蚀危害 试验方法概要和相关性 |
China National Standards CORR |
English PDF |
| GB/T 5169.35-2015 |
Fire hazard testing for electric and eletronic products—Part 35: CORRosion damage effects of fire effluent—General guidance 电工电子产品着火危险试验 第35部分：燃烧流的腐蚀危害 总则 |
China National Standards CORR |
English PDF |
| GB/T 32120-2015 |
Covering antiCORRosion technology of oxiditive polymerization for steel structures 钢结构氧化聚合型包覆防腐蚀技术 |
China National Standards CORR |
English PDF |
| GB/T 32119-2015 |
Covering antiCORRosion technology of multilayer petrolatum for marine steel structures 海洋钢铁构筑物复层矿脂包覆防腐蚀技术 |
China National Standards CORR |
English PDF |
| GB/T 32095.3-2015 |
Performance and test methods of non-stick surface of domestic metal utensils for household food—Part 3：Test specification of CORRosion resistance 家用食品金属烹饪器具不粘表面性能及测试规范 第3部分：耐腐蚀性测试规范 |
China National Standards CORR |
English PDF |
| GB/T 31944-2015 |
CORRosion resistant steel plates for cargo oil tanks 原油船货油舱用耐腐蚀钢板 |
China National Standards CORR |
English PDF |
| GB/T 31940-2015 |
Bi-metal composite CORRosion resistance steel pipe for fluid transportation 流体输送用双金属复合耐腐蚀钢管 |
China National Standards CORR |
English PDF |
| GB/T 31935-2015 |
CORRosion of metals and alloys—Corrosion test for intergranular corrosion susceptibility of low-Cr ferritic stainless steels 金属和合金的腐蚀 低铬铁素体不锈钢晶间腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 31933-2015 |
Test method for the CORRosion of steel bar embedded in concrete in chloride enviroment 模拟海洋环境钢筋耐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 16545-2015 |
CORRosion of metals and alloys—Removal of corrosion products from corrosion test specimens 金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除 |
China National Standards CORR |
English PDF |
| GB/T 31972-2015 |
Requirement of CORRosion protection for floating production and storage units offshore 海上浮式生产储存设备（FPS）的腐蚀防护要求 |
China National Standards CORR |
English PDF |
| GB/T 31819-2015 |
Anti-CORRosion technical specification for liquid fluorubber coated FGD chimney 液体氟橡胶涂敷脱硫后烟囱耐蚀作业技术规范 |
China National Standards CORR |
English PDF |
| GB/T 31817-2015 |
Specification of coating for CORRosion protection of windpower equipments 风力发电设施防护涂装技术规范 |
China National Standards CORR |
English PDF |
| GB/T 31586.2-2015 |
CORRosion protection of steel structures by protective paint systems—Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating—Part 2: Cross-cut testing and X-cut testing 防护涂料体系对钢结构的防腐蚀保护 涂层附着力/内聚力（破坏强度）的评定和验收准则 第2部分：划格试验和划叉试验 |
China National Standards CORR |
English PDF |
| GB/T 31588.1-2015 |
Paints and varnishes—Determination of resistance to cyclic CORRosion conditions—Part 1: Wet(salt fog)/dry/humidity 色漆和清漆 耐循环腐蚀环境的测定 第1部分：湿(盐雾)/干燥/湿气 |
China National Standards CORR |
English PDF |
| GB/T 31586.1-2015 |
CORRosion protection of steel structures by protective paint systems—Assessment of ,and acceptance criteria for,the adhesion/cohesion (fracture strength) of a coating—Part 1: Pull-off testing 防护涂料体系对钢结构的防腐蚀保护 涂层附着力/内聚力（破坏强度）的评定和验收准则 第1部分：拉开法试验 |
China National Standards CORR |
English PDF |
| GB/T 31550-2015 |
CORRugated boxes for packaging in transportation under low temperature 冷链运输包装用低温瓦楞纸箱 |
China National Standards CORR |
English PDF |
| GB/T 31404-2015 |
Technical specification for antiCORRosion operation of seawater circulation system in nuclear power plant 核电站海水循环系统防腐蚀作业技术规范 |
China National Standards CORR |
English PDF |
| GB/T 30789.8-2015 |
Paints and varnishes—Evaluation of degradation of coatings—Designation of quantity and size of defects ,and of intensity of uniform changes in appearance—Part 8: Assessment of degree of delamination and CORRosion around a scribe or other artificial 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第8部分：划线或其它人造缺陷周边剥离和腐蚀等级的评定 |
China National Standards CORR |
English PDF |
| GB/T 18241.5-2015 |
Rubber lining—Part 5：AntiCORRosion lining with high temperature resistance for equipment 橡胶衬里 第5部分：耐高温防腐衬里 |
China National Standards CORR |
English PDF |
| GB/T 23802-2015 |
Petroleum and natural gas industries—CORRosion-resistant alloy seamless tubes for use as casing,tubing and coupling stock—Technical delivery conditions 石油天然气工业 套管、油管和接箍毛坯用耐腐蚀合金无缝管交货技术条件 |
China National Standards CORR |
English PDF |
| GB/T 31439.2-2015 |
Guardrail—Part 2: CORRugated sheet steel thrie-beams for road guardrail 波形梁钢护栏 第2部分：三波形梁钢护栏 |
China National Standards CORR |
English PDF |
| GB/T 31439.1-2015 |
Guardrail—Part 1: CORRugated sheet steel W-beams for road guardrail 波形梁钢护栏 第1部分：两波形梁钢护栏 |
China National Standards CORR |
English PDF |
| GB/T 18226-2015 |
Specification for steel component antiCORRosion of highway engineering 公路交通工程钢构件防腐技术条件 |
China National Standards CORR |
English PDF |
| GB/T 31361-2015 |
Anti-CORRosion painting of solvent-free liquid epoxy coating 无溶剂环氧液体涂料的防腐蚀涂装 |
China National Standards CORR |
English PDF |
| GB/T 31296-2014 |
Sulfate-resistant and CORRosion-inhibiting admixtures for concrete 混凝土防腐阻锈剂 |
China National Standards CORR |
English PDF |
| GB/T 31317-2014 |
CORRosion of metals and alloys—Black box exposure test method 金属和合金的腐蚀 黑箱暴露试验方法 |
China National Standards CORR |
English PDF |
| GB/T 31205-2014 |
Abrasion-CORRosion resistant steel castings 耐磨耐蚀钢铸件 |
China National Standards CORR |
English PDF |
| GB 30981-2014 |
Limit of harmful substances of antiCORRosion coatings for construction steel structures 建筑钢结构防腐涂料中有害物质限量 |
China National Standards CORR |
English PDF |
| GB 18241.1-2014 |
Rubber lining―Part 1：AntiCORRosion lining for equipment 橡胶衬里 第1部分：设备防腐衬里 |
China National Standards CORR |
English PDF |
| GB/T 6822-2014 |
Antifouling and antiCORRosive paint system for ship hull 船体防污防锈漆体系 |
China National Standards CORR |
English PDF |
| GB/T 30790.8-2014 |
Paints and varnishes―CORRosion protection of steel structures by protective paint systems―Part 8:Development of specification for new work and maintenance 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第8部分：新建和维护技术规格书的制定 |
China National Standards CORR |
English PDF |
| GB/T 30790.7-2014 |
Paints and varnishes―CORRosion protection of steel structures by protective paint systems―Part 7: Execution and supervision of paint work 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第7部分：涂装的实施和管理 |
China National Standards CORR |
English PDF |
| GB/T 30790.6-2014 |
Paints and varnishes―CORRosion protection of steel structures by protective paint systems―Part 6: Laboratory performance test methods 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第6部分：实验室性能测试方法 |
China National Standards CORR |
English PDF |
| GB/T 30790.5-2014 |
Paints and varnishes―CORRosion protection of steel structures by protective paint systems―Part 5: Protective paint systems 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第5部分：防护涂料体系 |
China National Standards CORR |
English PDF |
| GB/T 30790.4-2014 |
Paints and varnishes―CORRosion protection of steel structures by protective paint systems―Part 4: Types of surface and surface preparation 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第4部分：表面类型和表面处理 |
China National Standards CORR |
English PDF |
| GB/T 30790.3-2014 |
Paints and varnishes―CORRosion protection of steel structures by protective paint systems―Part 3: Design considerations 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第3部分：设计依据 |
China National Standards CORR |
English PDF |
| GB/T 30790.2-2014 |
Paints and varnishes―CORRosion protection of steel structures by protective paint systems―Part 2: Classification of environments 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第2部分：环境分类 |
China National Standards CORR |
English PDF |
| GB/T 30790.1-2014 |
Paints and varnishes―CORRosion protection of steel structures by protective paint systems―Part 1: General introduction 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第1部分：总则 |
China National Standards CORR |
English PDF |
| GB/T 30789.9-2014 |
Paints and varnishes―Evaluation of degradation of coatings―Designation of quantity and size of defects,and of intensity of uniform changes in appearance―Part 9: Assessment of degree of filiform CORRosion 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第9部分：丝状腐蚀等级的评定 |
China National Standards CORR |
English PDF |
| GB/T 30786-2014 |
Paints and varnishes―Guidelines for the introduction of scribe marks through coatings on metallic panels for CORRosion testing 色漆和清漆 腐蚀试验用金属板涂层划痕标记导则 |
China National Standards CORR |
English PDF |
| GB/T 18175-2014 |
Determination of CORRosion inhibition performance of water treatment agents―Rotation specimen method 水处理剂缓蚀性能的测定 旋转挂片法 |
China National Standards CORR |
English PDF |
| GB/T 19285-2014 |
Inspection of CORRosion protection for buried steel pipelines 埋地钢质管道腐蚀防护工程检验 |
China National Standards CORR |
English PDF |
| GB 50212-2014 |
Code for construction of building antiCORRosive engineering 建筑防腐蚀工程施工规范 |
China National Standards CORR |
English PDF |
| GB/T 7989-2013 |
Viterous and porcelain enamels―Determination of resistance to chemical CORRosion by boiling acids and their vapours 搪玻璃釉 耐沸腾酸及其蒸气腐蚀性能的测定 |
China National Standards CORR |
English PDF |
| GB/T 16717-2013 |
Packing containers―Heavy duty CORRugated boxes 包装容器 重型瓦楞纸箱 |
China National Standards CORR |
English PDF |
| GB/T 30156-2013 |
Method of CORRosion and wear for the coated accessories of textile products 纺织制品涂层附件腐蚀和磨损的方法 |
China National Standards CORR |
English PDF |
| GB/T 30064-2013 |
Metallic materials - Method of constraint loss CORRection of CTOD fracture toughness for fracture assessment of steel components 金属材料 钢构件断裂评估中裂纹尖端张开位移（CTOD）断裂韧度的拘束损失修正方法 |
China National Standards CORR |
English PDF |
| GB/T 30059-2013 |
Seamless CORRosion-resisting alloy tubes for heat-exchanger 热交换器用耐蚀合金无缝管 |
China National Standards CORR |
English PDF |
| GB 17915-2013 |
Specifications for storage and preservation of CORRosive goods 腐蚀性商品储存养护技术条件 |
China National Standards CORR |
English PDF |
| GB/T 15748-2013 |
The method of galvanic CORRosion test for metallic ship materials 船用金属材料电偶腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB 30000.19-2013 |
Rules for classification and labelling of chemicals - Part 19：Skin CORRosion/irritation 化学品分类和标签规范 第19部分：皮肤腐蚀/刺激 |
China National Standards CORR |
English PDF |
| GB 30000.17-2013 |
Rules for classification and labelling of chemicals - Part 17: CORRosive to metals 化学品分类和标签规范 第17部分：金属腐蚀物 |
China National Standards CORR |
English PDF |
| GB/T 29088-2012 |
CORRosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method 金属和合金的腐蚀 双环电化学动电位再活化测量方法 |
China National Standards CORR |
English PDF |
| GB/T 29037-2012 |
Thermal spraying - Coatings for protection against CORRosion and oxidation at elevated temperatures 热喷涂 抗高温腐蚀和氧化的保护涂层 |
China National Standards CORR |
English PDF |
| GB/T 10125-2012 |
CORRosion tests in artificial atmospheres - Salt spray tests 人造气氛腐蚀试验 盐雾试验 |
China National Standards CORR |
English PDF |
| GB/T 29065-2012 |
Road vehicles - Brake lining friction materials - Evaluation method of CORRosion effects on painted backing plates and brake shoes 道路车辆 制动衬片摩擦材料 涂漆背板和制动蹄耐腐蚀性能评价方法 |
China National Standards CORR |
English PDF |
| GB/T 29040-2012 |
Test methods of rolling resistance for motor vehicle tyres - Single point test and CORRelation of measurement results 汽车轮胎滚动阻力试验方法 单点试验和测量结果的相关性 |
China National Standards CORR |
English PDF |
| GB/T 29423-2012 |
Alkali-activated slag-fly ash concrete for antiCORRosive cement products 用于耐腐蚀水泥制品的碱矿渣粉煤灰混凝土 |
China National Standards CORR |
English PDF |
| GB/T 2424.10-2012 |
Environmental testing - General guidance of accelerated testing for atmospheric CORRosion 环境试验 大气腐蚀加速试验的通用导则 |
China National Standards CORR |
English PDF |
| GB/T 17497.3-2012 |
Decorative products by flexographic printing - Part 3: CORRugated board 柔性版装潢印刷品 第3部份：瓦楞纸板类 |
China National Standards CORR |
English PDF |
| GB/T 28907-2012 |
Sulfuric acid dew-point CORRosion resistance steel plates and strips 耐硫酸露点腐蚀钢板和钢带 |
China National Standards CORR |
English PDF |
| GB/T 2423.51-2012 |
Environmental testing - Part 2: Test methods - Test Ke: Flowing mixed gas CORRosion test 环境试验 第2部分：试验方法 试验Ke：流动混合气体腐蚀试验 |
China National Standards CORR |
English PDF |
| GB/T 28713.2-2012 |
Enhanced heat transfer elements used in tube-shell heat exchangers- Part 2：Stainless steel CORRugated tubes 管壳式热交换器用强化传热元件 第2部分：不锈钢波纹管 |
China National Standards CORR |
English PDF |
| GB/T 28416-2012 |
CORRosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying 人工大气中的腐蚀试验 交替暴露在腐蚀性气体、中性盐雾及干燥环境中的加速腐蚀试验 |
China National Standards CORR |
English PDF |
| GB/T 24513.3-2012 |
CORRosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity 金属和合金的腐蚀 室内大气低腐蚀性分类 第3部分：影响室内大气腐蚀性的环境参数测定 |
China National Standards CORR |
English PDF |
| GB/T 28485-2012 |
Coated adornment - Detection of nickel release - Method for simulation of wear and CORRosion 镀层饰品 镍释放量的测定 磨损和腐蚀模拟法 |
China National Standards CORR |
English PDF |
| GB/T 28531-2012 |
Guideline on transport CORRidor performance measurement and monitoring 运输通道物流绩效评估与监控规范 |
China National Standards CORR |
English PDF |
| GB/T 28387.5-2012 |
Safety requirements of the design and construction of printing and paper converting machines - Part 5：Machines for the production of CORRugated board and machines for the conversion of flat and corrugated board 印刷机械和纸加工机械的设计及结构安全规则 第5部分：瓦楞纸板生产机械以及纸板和瓦楞纸板加工设备 |
China National Standards CORR |
English PDF |
| GB/T 27828-2011 |
Chemicals - Test method of in vitro skin CORRosion - Transcutaneous electrical resistance test（TER） 化学品 体外皮肤腐蚀 经皮电阻试验方法 |
China National Standards CORR |
English PDF |
| GB/T 27795-2011 |
Test method for CORRosion testing of non-metallic gaskets 非金属垫片腐蚀性试验方法 |
China National Standards CORR |
English PDF |
| GB/T 27830-2011 |
Chemicals - Test method of in vitro skin CORRosion - Human skin model test 化学品 体外皮肤腐蚀 人体皮肤模型试验方法 |
China National Standards CORR |
English PDF |
| GB/T 27829-2011 |
Chemicals - In vitro test of skin CORRosion - Membrane barrier method 化学品 体外皮肤腐蚀 膜屏障试验方法 |
China National Standards CORR |
English PDF |
| GB/T 27806-2011 |
Tar epoxy anti-CORRosion coatings 环氧沥青防腐涂料 |
China National Standards CORR |
English PDF |
| GB/T 20159.4-2011 |
Classification of environmental condition - Guidance for the CORRelation and transformation of environmental condition classes to the environmental tests - Stationary use at non-weatherprotected locations 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 无气候防护场所固定使用 |
China National Standards CORR |
English PDF |
| GB/T 20159.3-2011 |
Classification of environmental conditions - Guidance for the CORRelation and transformation of environmental condition classes to the environmental tests - Stationary use at weatherprotected locations 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 有气候防护场所固定使用 |
China National Standards CORR |
English PDF |
| GB/T 26933-2011 |
CORRugated roof panel for steel general cargo containers 钢制通用集装箱封闭槽型顶板 |
China National Standards CORR |
English PDF |
| GB 50727-2011 |
Code for acceptance of construction quality of antiCORRosive engineering of industrial equipment and pipeline 工业设备及管道防腐蚀工程施工质量验收规范 |
China National Standards CORR |
English PDF |
| GB 50726-2011 |
Code for antiCORRosive engineering construction of industrial euqipment and pipeline 工业设备及管道防腐蚀工程施工规范 |
China National Standards CORR |
English PDF |
| GB/T 26825-2011 |
Static-resistance FJ antiCORRosive glues FJ抗静电防腐胶 |
China National Standards CORR |
English PDF |
| GB/T 26737-2011 |
Road vehicles - Brake linings - Test method for seizure to ferrous mating surface due to CORRosion 道路车辆 制动衬片 锈蚀对铁偶合面粘结影响的试验方法 |
China National Standards CORR |
English PDF |
| GB/T 12668.6-2011 |
Adjustable speed electrical power drive systems - Part 6：Guide for determination of types of load duty and CORResponding current ratings 调速电气传动系统 第6部分：确定负载工作制类型和相应电流额定值的导则 |
China National Standards CORR |
English PDF |
| GB/T 26491-2011 |
Determination of intergranular CORRosion of 5XXX series aluminum alloys by mass loss 5XXX系铝合金晶间腐蚀试验方法 质量损失法 |
China National Standards CORR |
English PDF |
| GB/T 6548-2011 |
CORRugated fiberboard - Determination of ply adhesive strength 瓦楞纸板粘合强度的测定 |
China National Standards CORR |
English PDF |
| GB/T 26323-2010 |
Paints and varnishes - Determination of resistance to filiform CORRosion on aluminium and aluminium alloys 色漆和清漆 铝及铝合金表面涂膜的耐丝状腐蚀试验 |
China National Standards CORR |
English PDF |
| GB/T 26299-2010 |
Copper alloy sheet and strip for anti-CORRosion 耐蚀用铜合金板、带材 |
China National Standards CORR |
English PDF |
| GB/T 26256-2010 |
Interference, coexistence and CORResponding measurement methods of 2.4GHz wireless telecommunications equipment 2.4GHz频段无线电通信设备的相互干扰限制与共存要求及测试方法 |
China National Standards CORR |
English PDF |
| GB/T 26002-2010 |
Stainless steel pliable CORRugated tubing and fittings used in gas piping systems 燃气输送用不锈钢波纹软管及管件 |
China National Standards CORR |
English PDF |
| GB/T 25996-2010 |
Test method for thermal insulations on external stress CORRosion cracking of austenitic stainless steel 绝热材料对奥氏体不锈钢外部应力腐蚀开裂的试验方法 |
China National Standards CORR |
English PDF |
| GB/T 24513.2-2010 |
CORRosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres 金属和合金的腐蚀 室内大气低腐蚀性分类 第2部分：室内大气腐蚀性的测定 |
China National Standards CORR |
English PDF |
| GB/T 14525-2010 |
General specification for CORRugated metal hose assemblies 波纹金属软管通用技术条件 |
China National Standards CORR |
English PDF |
| GB/T 25961-2010 |
Standard test method for CORRosive sulfur in electrical insulating oils 电气绝缘油中腐蚀性硫的试验法 |
China National Standards CORR |
English PDF |
| GB/T 25834-2010 |
CORRosion of metals and alloys - Accelerate corrosion testing of iron and steel in outdoor atmospheres 金属和合金的腐蚀 钢铁户外大气加速腐蚀试验 |
China National Standards CORR |
English PDF |
| GB/T 25477-2010 |
Anti-CORRosion magnetic trurning column fluid level gauge 防腐磁性翻柱式液位计 |
China National Standards CORR |
English PDF |
| GB/T 25314-2010 |
Requirements of CORRosion management program for mechanical equipment in nuclear power plants 核电厂机械设备腐蚀管理大纲内容要求 |
China National Standards CORR |
English PDF |
| GB/T 50538-2010 |
Technical standard for anti-CORRosion and insulation coatings of buried steel pipeline 埋地钢质管道防腐保温层技术标准 |
China National Standards CORR |
English PDF |
| GB/T 25263-2010 |
Chlorinated rubber antiCORRosive coatings 氯化橡胶防腐涂料 |
China National Standards CORR |
English PDF |
| GB/T 25258-2010 |
Perchlorovinyl resin antiCORRosive coatings 过氯乙烯树脂防腐涂料 |
China National Standards CORR |
English PDF |
| GB/T 25252-2010 |
Phenolic resin antiCORRosive coatings 酚醛树脂防锈涂料 |
China National Standards CORR |
English PDF |
| GB/T 25185-2010 |
Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge CORRection 表面化学分析 X射线光电子能谱 - 荷电控制和荷电校正方法的报告 |
China National Standards CORR |
English PDF |
| GB/T 25151.4-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular CORRosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第4部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取 |
China National Standards CORR |
English PDF |
| GB/T 25151.3-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 3: Intergranular CORRosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第3部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验 |
China National Standards CORR |
English PDF |
| GB/T 25151.2-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 2: Selective CORRosion examination and metallography examination for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第2部分：尿素级超低碳铬镍钼奥氏体不锈钢选择性腐蚀检查和金相检查 |
China National Standards CORR |
English PDF |
| GB/T 25147-2010 |
Test method of metal CORRosion amount and corrosion rate of chemical cleaning for industrial equipment - Gravimetric method 工业设备化学清洗中金属腐蚀率及腐蚀总量的测试方法 重量法 |
China National Standards CORR |
English PDF |
| GB/T 25094-2010 |
General technical specification of CORRective maintenance tower for overhead transmission line 架空输电线路抢修杆塔通用技术条件 |
China National Standards CORR |
English PDF |
| GB/T 18593-2010 |
Anti-CORRosive painting of fusion bonded epoxy coating powders 熔融结合环氧粉末涂料的防腐蚀涂装 |
China National Standards CORR |
English PDF |
| GB 50224-2010 |
Code for acceptance of construction quality of antiCORRosive engineering of buildings 建筑防腐蚀工程施工质量验收规范 |
China National Standards CORR |
English PDF |
| GB/T 50590-2010 |
Technical code for antiCORRosion engineering of vinyl ester resins 乙烯基酯树脂防腐蚀工程技术规范 |
China National Standards CORR |
English PDF |
| GB/T 18777-2009 |
Geometrical product specifications (GPS) - Surface texture - Profile method - Metrological characteristics of phase CORRect filters 产品几何技术规范（GPS） 表面结构 轮廓法 相位修正滤波器的计量特性 |
China National Standards CORR |
English PDF |
| GB/T 4061-2009 |
Polycrystalline silicon-examination method-assessment of sandwiches on cross-section by chemical CORRosion 硅多晶断面夹层化学腐蚀检验方法 |
China National Standards CORR |
English PDF |
| GB/T 24518-2009 |
CORRosion of metals and alloys - Test methods for stress corrosion cracking in outdoor environments 金属和合金的腐蚀 应力腐蚀室外暴露试验方法 |
China National Standards CORR |
English PDF |
| GB/T 24517-2009 |
CORRosion of metals and alloys - Outdoors exposure test methods for periodic water spray 金属和合金的腐蚀 户外周期喷淋暴露试验方法 |
China National Standards CORR |
English PDF |
| GB/T 24516.2-2009 |
CORRosion of metals and alloys - Atmospheric corrosion - Sun tracking exposure test methods 金属和合金的腐蚀 大气腐蚀 跟踪太阳暴露试验方法 |
China National Standards CORR |
English PDF |
| GB/T 24516.1-2009 |
CORRosion of metals and alloys - Atmospheric corrosion - Determination of meteorologic factors 金属和合金的腐蚀 大气腐蚀 地面气象因素观测方法 |
China National Standards CORR |
English PDF |
| GB/T 24513.1-2009 |
CORRosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity 金属和合金的腐蚀 室内大气低腐蚀性分类 第1部分：室内大气腐蚀性的测定与评价 |
China National Standards CORR |
English PDF |
| GB/T 5267.4-2009 |
Passivation of CORRosion-resistant stainless-steel fasteners 紧固件表面处理 耐腐蚀不锈钢钝化处理 |
China National Standards CORR |
English PDF |
| GB/T 8034-2009 |
Benzol products of coal carbonization-CORRosiveness to copper-copper strip test 焦化苯类产品铜片腐蚀的测定方法 |
China National Standards CORR |
English PDF |
| GB/T 24201-2009 |
Test method for CORRosion resistance of blast furnace brick to pig iron 高炉炭块抗铁水熔蚀性试验方法 |
China National Standards CORR |
English PDF |
| GB/T 24196-2009 |
CORRosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements 金属和合金的腐蚀 电化学试验方法 恒电位和动电位极化测量导则 |
China National Standards CORR |
English PDF |
| GB/T 24195-2009 |
CORRosion of metals and alloys - Accelerated cyclic tests with exposure to acidified salt spray, “dry” and “wet” conditions 金属和合金的腐蚀 酸性盐雾、“干燥”和“湿润”条件下的循环加速腐蚀试验 |
China National Standards CORR |
English PDF |
| GB/T 14093.4-2009 |
Environmental technology requirements of machinery products for the industry - CORRosion environments 机械产品环境技术要求 工业腐蚀环境 |
China National Standards CORR |
English PDF |
| GB/T 14092.5-2009 |
Environmental condition for machinery products - Industrial CORRosion 机械产品环境条件 工业腐蚀 |
China National Standards CORR |
English PDF |
| GB/T 14834-2009 |
Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and CORRode metals 硫化橡胶或热塑性橡胶 与金属粘附性及对金属腐蚀作用的测定 |
China National Standards CORR |
English PDF |
| GB/T 23639-2009 |
Energy conservation and CORRosion-resistant steel-madecable support system 节能耐腐蚀钢制电缆桥架 |
China National Standards CORR |
English PDF |
| GB/T 8491-2009 |
CORRosion resistant high silicon iron castings 高硅耐蚀铸铁件 |
China National Standards CORR |
English PDF |
| GB/T 23258-2009 |
Standard practice controlling internal CORRosion in steel pipelines 钢质管道内腐蚀控制规范 |
China National Standards CORR |
English PDF |
| GB/T 9772-2009 |
Fiber cement CORRugated sheets and ridge tile 纤维水泥波瓦及其脊瓦 |
China National Standards CORR |
English PDF |
| GB/T 10582-2008 |
Electrical insulating materials - Determination of electrolytic CORRosion caused by insulating materials-test methods 电气绝缘材料 测定因绝缘材料引起的电解腐蚀的试验方法 |
China National Standards CORR |
English PDF |
| GB/Z 22721-2008 |
Guidance for the CORRect use of residual current-operated protective devices (RCDs) for household and similar use 正确使用家用和类似用途剩余电流动作保护电器（RCD）的指南 |
China National Standards CORR |
English PDF |
| GB/T 20159.8-2008 |
Classification of environmental conditions - Guidance for the CORRelation and transformation of environmental condition classes to the environmental tests - Introduction 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 导言 |
China National Standards CORR |
English PDF |
| GB/T 20159.7-2008 |
Classification of environmental conditions - Guidance for the CORRelation and transformation of environmental condition classes to the environment tests - Portable and non-stationary use 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 携带和非固定使用 |
China National Standards CORR |
English PDF |
| GB/T 20159.6-2008 |
Classification of environmental conditions - Guidance for the CORRelation and transformation of environmental condition classes to the environment tests - Ship environment 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 船用 |
China National Standards CORR |
English PDF |
| GB/T 20159.5-2008 |
Classification of environmental conditions - Guidance for the CORRelation and transformation of environmental condition classes to the environment tests - Ground vehicle installations 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 地面车辆使用 |
China National Standards CORR |
English PDF |
| GB/T 20159.2-2008 |
Classification of environmental conditions - Guidance for the CORRelation and transformation of environmental condition classes to the environment tests - Transportation 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 运输 |
China National Standards CORR |
English PDF |
| GB/T 22876-2008 |
Paper，board and CORRugated fiberboard - Description and calibration of compression testing equipment 纸、纸板和瓦楞纸板 压缩试验仪的描述和校准 |
China National Standards CORR |
English PDF |
| GB/T 22874-2008 |
Single-faced and single-wall CORRugated fibreboard - Determination of flat crush resistance 单面和单瓦楞纸板 平压强度的测定 |
China National Standards CORR |
English PDF |
| GB/T 22873-2008 |
CORRugated fibreboard - Determination of the water resistance of the glue bond（immersion） 瓦楞纸板 胶粘抗水性的测定（浸水法） |
China National Standards CORR |
English PDF |
| GB/T 22811-2008 |
CORRugated fibreboard - Determination of the grammage of the component papers after separation 瓦楞纸板 分离后组成原纸定量的测定 |
China National Standards CORR |
English PDF |
| GB/T 22640-2008 |
Test method of C-Ring sample to stress-CORRosion cracking for wrought aluminium and aluminium alloys products 铝合金加工产品的环形试样应力腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 22639-2008 |
Test method of exfoliation CORRosion for wrought aluminium and aluminium alloys 铝合金加工产品的剥落腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 22582-2008 |
Power capacitors - Low-voltage power factor CORRection banks 电力电容器 低压功率因数补偿装置 |
China National Standards CORR |
English PDF |
| GB/T 4334-2008 |
CORRosion of metals and alloys - Test methods for intergranular corrosion of stainless steels 金属和合金的腐蚀 不锈钢晶间腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 4171-2008 |
Atmospheric CORRosion resisting structural steel 耐候结构钢 |
China National Standards CORR |
English PDF |
| GB/T 20972.3-2008 |
Petroleum and natural gas industries - Material for use in H2S-containing environments in oil and gas production - part 3: Cracking-resistant CRAs (CORRosion-resistant alloys) and other alloys 石油天然气工业 油气开采中用于含硫化氢环境的材料 第3部分：抗开裂耐蚀合金和其他合金 |
China National Standards CORR |
English PDF |
| GB/T 22316-2008 |
Test methods of CORRosion resistance for electrolytic tinplate 电镀锡钢板耐腐蚀性试验方法 |
China National Standards CORR |
English PDF |
| GB/T 15007-2008 |
Designations of CORRosion-resisting alloy 耐蚀合金牌号 |
China National Standards CORR |
English PDF |
| GB/T 6384-2008 |
The testing methods for seawater CORRosion in natural environment of metallic materials for ship and offshore structures 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法 |
China National Standards CORR |
English PDF |
| GB 50393-2008 |
Technical code for antiCORRosive engineering of the steel petroleum tank 钢质石油储罐防腐蚀工程技术规范 |
China National Standards CORR |
English PDF |
| GB/T 749-2008 |
Test method for determining capability of resisting sulfate CORRode of cement 水泥抗硫酸盐侵蚀试验方法 |
China National Standards CORR |
English PDF |
| GB/T 2951.51-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of CORRosive component 电缆和光缆绝缘和护套材料通用试验方法 第51部分：填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率 |
China National Standards CORR |
English PDF |
| GB/T 22057.2-2008 |
Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-CORRected optical systems 显微镜 相对机械参考平面的成像距离 第2部分：无限远校正光学系统 |
China National Standards CORR |
English PDF |
| GB/T 6466-2008 |
Electrodeposited chromium coatings - Electrolytic CORRosion testing (EC test) 电沉积铬层 电解腐蚀试验(EC试验) |
China National Standards CORR |
English PDF |
| GB/T 6465-2008 |
Metallic and other non-organic coatings - CORRodkote corrosion test(CORR test) 金属和其他无机覆盖层 腐蚀膏腐蚀试验 (CORR试验) |
China National Standards CORR |
English PDF |
| GB/T 3903.19-2008 |
Footwear - Test methods for accessories:Metallic accessories - CORRosion resistance 鞋类 金属附件试验方法 耐腐蚀性 |
China National Standards CORR |
English PDF |
| GB/T 13352-2008 |
Belt drives V－belts for the automotive - Industry and CORResponding pulleys - Dimensions 带传动 汽车工业用V带及其带轮 尺寸 |
China National Standards CORR |
English PDF |
| GB/T 5170.11-2008 |
Inspection methods for environmental testing equipments for electric and electronic products - CORRosive gas testing equipments 电工电子产品环境试验设备检验方法 腐蚀气体试验设备 |
China National Standards CORR |
English PDF |
| GB/T 17506-2008 |
The analysis method of CORRosive layer on ferrous metals of ship with EPMA 船舶黑色金属腐蚀层的电子探针分析方法 |
China National Standards CORR |
English PDF |
| GB/T 6748-2008 |
AntiCORRosive paint for ship 船用防锈漆 |
China National Standards CORR |
English PDF |
| GB/T 14165-2008 |
CORRosion of metals and alloys - Atmospheric corrosion testing - General requirements for field tests 金属和合金 大气腐蚀试验 现场试验的一般要求 |
China National Standards CORR |
English PDF |
| GB/T 13452.4-2008 |
Paints and varnishes - Determination of resistance to filiform CORRosion on steel 色漆和清漆 钢铁表面上涂膜的耐丝状腐蚀试验 |
China National Standards CORR |
English PDF |
| GB/T 15008-2008 |
CORRosion-resisting alloy bars 耐蚀合金棒 |
China National Standards CORR |
English PDF |
| GB/T 14986-2008 |
High saturation magnetic induction, magnetic compensate alloys depending on temperature variation, CORRosion-resisting, iron-aluminium, Permanent permeability, soft magneticalloys 高饱和、磁温度补偿、耐蚀、铁铝、恒磁导率软磁合金 |
China National Standards CORR |
English PDF |
| GB/T 27027-2008 |
Guidelines for CORRective action to be taken by a certification body in the event of misuse of its mark of conformity 认证机构对误用其符合性标志采取纠正措施的实施指南 |
China National Standards CORR |
English PDF |
| GB/T 6543-2008 |
Single and double CORRugated boxes for transport packages 运输包装用单瓦楞纸箱和双瓦楞纸箱 |
China National Standards CORR |
English PDF |
| GB/T 16267-2008 |
Test method of packaging materials - Vapors CORRosion inhibiting ability 包装材料试验方法 气相缓蚀能力 |
China National Standards CORR |
English PDF |
| GB/T 16266-2008 |
Test method of packaging materials - Contact CORRosion 包装材料试验方法 接触腐蚀 |
China National Standards CORR |
English PDF |
| GB/T 14188-2008 |
General rules for selection and using of packaging materials with volatile CORRosion inhibitor 气相防锈包装材料选用通则 |
China National Standards CORR |
English PDF |
| GB/T 21621-2008 |
Dangerous goods - Test method for CORRosion to metals of corrosive substance 危险品 金属腐蚀性试验方法 |
China National Standards CORR |
English PDF |
| GB/T 21609-2008 |
Test method of acute dermal irritation/CORRosion for chemicals 化学品急性眼刺激性/腐蚀性试验方法 |
China National Standards CORR |
English PDF |
| Find out:497Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
