Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 7689.1-2013 |
ReinForcements - Test method for woven fabrics - Part 1：Determination of thickness 增强材料 机织物试验方法 第1部分：厚度的测定 |
China National Standards Force |
 English PDF |
| GB/T 30022-2013 |
Test method for basic mechanical properties of fiber reinForced polymer bar 纤维增强复合材料筋基本力学性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 30021-2013 |
Warp knitting carbon fiber reinForcements 经编碳纤维增强材料 |
China National Standards Force |
English PDF |
| GB/T 27797.4-2013 |
Fibre-reinForced plastics - Methods of producing test plates - Part 4：Moulding of prepregs 纤维增强塑料 试验板制备方法 第4部分：预浸料模塑 |
China National Standards Force |
English PDF |
| GB/T 29822-2013 |
Tungsten-rhenium thermocouple wires and temperature-electromotive Force(EMF) tables 钨铼热电偶丝及分度表 |
China National Standards Force |
English PDF |
| GB 50949-2013 |
Construction code for sound reinForcement system 扩声系统工程施工规范 |
China National Standards Force |
English PDF |
| GB/T 3923.2-2013 |
Textiles - Tensile properties of fabrics - Part 2 :Determination of maximum Force using the grab method 纺织品 织物拉伸性能 第2部分：断裂强力的测定（抓样法） |
China National Standards Force |
English PDF |
| GB/T 3923.1-2013 |
Textiles - Tensile properties of fabrics - Part 1: Determination of maximum Force and elongation at maximum force using the strip method 纺织品 织物拉伸性能 第1部分：断裂强力和断裂伸长率的测定（条样法） |
China National Standards Force |
English PDF |
| GB/T 3916-2013 |
Textiles - Yarns from packages - Determination of single-end breaking Force and elongation at break using constant rate of extension (CRE) tester 纺织品 卷装纱 单根纱线断裂强力和断裂伸长率的测定（CRE法） |
China National Standards Force |
English PDF |
| GB 13014-2013 |
Quenching and self-tempering ribbed bars for the reinForcement of concrete 钢筋混凝土用余热处理钢筋 |
China National Standards Force |
English PDF |
| GB/T 7690.6-2013 |
ReinForcements - Test method for yarns - Part 6: Determination of twist balance index 增强材料 纱线试验方法 第6部分：捻度平衡指数的测定 |
China National Standards Force |
English PDF |
| GB/T 7690.5-2013 |
ReinForcements - Test method for yarns - Part 5：Determination of fiber diameter for glass fiber 增强材料 纱线试验方法 第5部分：玻璃纤维纤维直径的测定 |
China National Standards Force |
English PDF |
| GB/T 7690.4-2013 |
ReinForcements - Test method for yarns - Part 4: Determination of stiffness 增强材料 纱线试验方法 第4部分：硬挺度的测定 |
China National Standards Force |
English PDF |
| GB/T 7689.2-2013 |
ReinForcements - Test method for woven fabrics - Part 2: Determination of number of yarns per unit length of warp and weft 增强材料 机织物试验方法 第2部分：经、纬密度的测定 |
China National Standards Force |
English PDF |
| GB/T 6006.2-2013 |
Test method for glass mats - Part 2: Determination of tensile breaking Force 玻璃纤维毡试验方法 第2部分：拉伸断裂强力的测定 |
China National Standards Force |
English PDF |
| GB/T 29640-2013 |
Plastics - Glass fiber reinForced poly(decamethylene terephthalamide) compound 塑料 玻璃纤维增强聚对苯二甲酰癸二胺 |
China National Standards Force |
English PDF |
| GB/T 29555-2013 |
Test method of operating Forces for doors 门的启闭力试验方法 |
China National Standards Force |
English PDF |
| GB/T 29552-2013 |
Fibre reinForced plastics composites bridge decks 纤维增强复合材料桥板 |
China National Standards Force |
English PDF |
| GB/T 29048-2012 |
Operating Forces - Test method - Windows 窗的启闭力试验方法 |
China National Standards Force |
English PDF |
| GB/T 29165.2-2012 |
Petroleum and natural gas industries - Glass-reinForced plastics (GRP) piping - Part 2: Qualification and manufacture 石油天然气工业 玻璃纤维增强塑料管 第2部分：评定与制造 |
China National Standards Force |
English PDF |
| GB/T 29165.1-2012 |
Petroleum and natural gas industries - Glass-reinForced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials 石油天然气工业 玻璃纤维增强塑料管 第1部分：词汇、符号、应用及材料 |
China National Standards Force |
English PDF |
| GB/T 29324-2012 |
Fiber reinForced polymer matrix composite core for overhead electrical conductors 架空导线用纤维增强树脂基复合材料芯棒 |
China National Standards Force |
English PDF |
| GB 50843-2013 |
Technical code for appraisal and reinForcement of building slope 建筑边坡工程鉴定与加固技术规范 |
China National Standards Force |
English PDF |
| GB/T 28891-2012 |
Fibre-reinForced plastic composites - Determination of mode Ⅰinterlaminar fracture toughness GⅠC for unidirectionally reinforced materials 纤维增强塑料复合材料 单向增强材料Ⅰ型层间断裂韧性GⅠC的测定 |
China National Standards Force |
English PDF |
| GB/T 28900-2012 |
Test methods of steel for reinForcement of concrete 钢筋混凝土用钢材试验方法 |
China National Standards Force |
English PDF |
| GB/T 28872-2012 |
Testing method of magnetic lightly-striking mode atomic Force microscope for nanotopography of living cells 活细胞样品纳米结构的磁驱动轻敲模式原子力显微镜检测方法 |
China National Standards Force |
English PDF |
| GB/T 14904-2011 |
Rubber and plastics hoses and hose assemblies with wire reinForcements Hydraulic impulse test with flexing 钢丝增强橡胶和塑料软管及软管组合件 曲挠液压脉冲试验 |
China National Standards Force |
English PDF |
| GB/T 28114-2011 |
Magnesium reinForced porcelain ware 镁质强化瓷器 |
China National Standards Force |
English PDF |
| GB/T 27799-2011 |
Fabric reinForce plastic cover panel of trucks 载货汽车用复合材料覆盖件 |
China National Standards Force |
English PDF |
| GB/T 27797.9-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC 纤维增强塑料 试验板制备方法 第9部分：GMT/STC模塑 |
China National Standards Force |
English PDF |
| GB/T 27797.8-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分：SMC及BMC模塑 |
China National Standards Force |
English PDF |
| GB/T 27797.7-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分：树脂传递模塑 |
China National Standards Force |
English PDF |
| GB/T 27797.6-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 6: Pultrusion moulding 纤维增强塑料 试验板制备方法 第6部分：拉挤模塑 |
China National Standards Force |
English PDF |
| GB/T 27797.5-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 5: Filament winding 纤维增强塑料 试验板制备方法 第5部分：缠绕成型 |
China National Standards Force |
English PDF |
| GB/T 27797.3-2011 |
Fibre-reinForced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分：湿法模塑 |
China National Standards Force |
English PDF |
| GB/T 27797.2-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分：接触和喷射模塑 |
China National Standards Force |
English PDF |
| GB/T 27797.1-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 1: General conditions 纤维增强塑料 试验板制备方法 第1部分：通则 |
China National Standards Force |
English PDF |
| GB/T 27797.11-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分：BMC和其他长纤维模塑料注射模塑 小方片 |
China National Standards Force |
English PDF |
| GB/T 27797.10-2011 |
Fibre-reinForced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards Force |
English PDF |
| GB/T 27760-2011 |
Test method for calibrating the z-magnification of an atomic Force microscope at subnanometer displacement levels using si (111) monatomic steps 利用Si（111）晶面原子台阶对原子力显微镜亚纳米高度测量进行校准的方法 |
China National Standards Force |
English PDF |
| GB/T 4959-2011 |
Methods of measurement for the characteristics of sound reinForcement in auditoria 厅堂扩声特性测量方法 |
China National Standards Force |
English PDF |
| GB/T 28049-2011 |
Code for sound reinForcement system design of auditorium, gymnasiums and stadium 厅堂、体育场馆扩声系统设计规范 |
China National Standards Force |
English PDF |
| GB/T 28048-2011 |
Code for acceptance of quality of sound reinForcement system of auditorium gymnasium and stadium 厅堂、体育场馆扩声系统验收规范 |
China National Standards Force |
English PDF |
| GB/T 28047-2011 |
Method of listening evaluation of sound reinForcement of auditorium gymnasium and stadium 厅堂、体育场馆扩声系统听音评价方法 |
China National Standards Force |
English PDF |
| GB/T 26747-2011 |
Fiber reinForced plastics tanks for water treatment units 水处理装置用复合材料罐 |
China National Standards Force |
English PDF |
| GB/T 26743-2011 |
Fiber reinForced composite bars for civil engineering 结构工程用纤维增强复合材料筋 |
China National Standards Force |
English PDF |
| GB/T 26735-2011 |
Glass fiber reinForced thermosetting resin spray pipe 玻璃纤维增强热固性树脂喷淋管 |
China National Standards Force |
English PDF |
| GB 26537-2011 |
Steet fiber reinForced concrete manhole cover 钢纤维混凝土检查井盖 |
China National Standards Force |
English PDF |
| GB/T 3683-2011 |
Rubber hoses and hose assemblies - Wire-braid-reinForced hydraulic types for oil-based or water-based fluids - Specification 橡胶软管及软管组合件 油基或水基流体适用的钢丝编织增强液压型 规范 |
China National Standards Force |
English PDF |
| GB/T 26518-2011 |
ReinForced and composite polymeric sheets for water proof 高分子增强复合防水片材 |
China National Standards Force |
English PDF |
| GB 50669-2011 |
Code for construction and acceptance of reinForced concrete silos 钢筋混凝土筒仓施工与质量验收规范 |
China National Standards Force |
English PDF |
| GB/T 26437-2010 |
Feed efficacy and safety evaluation - Guidelines for the determination of apparent metabolizable energy for chickens by the Force feeding method 畜禽饲料有效性与安全性评价 强饲法测定鸡饲料表观代谢能技术规程 |
China National Standards Force |
English PDF |
| GB/T 25917-2010 |
Axial Force-applied fatigue testing machines dynamic force calibration 轴向加力疲劳试验机动态力校准 |
China National Standards Force |
English PDF |
| GB/T 26076-2010 |
Metal sheets and strips - Axial-Force-controlled fatigue testing method 金属薄板（带） 轴向力控制疲劳试验方法 |
China National Standards Force |
English PDF |
| GB/T 16823.3-2010 |
Fasteners - Torque/clamp Force testing 紧固件 扭矩-夹紧力试验 |
China National Standards Force |
English PDF |
| GB/T 13763-2010 |
Geosynthetics - Determination of trapezoid tearing Force 土工合成材料 梯形法撕破强力的测定 |
China National Standards Force |
English PDF |
| GB/T 25826-2010 |
Epoxy-coated steel for the reinForcement of concrete 钢筋混凝土用环氧涂层钢筋 |
China National Standards Force |
English PDF |
| GB/T 1499.3-2010 |
Steel for the reinForcement of concrete - Part3 : Welded fabric 钢筋混凝土用钢 第3部分：钢筋焊接网 |
China National Standards Force |
English PDF |
| GB/T 16701-2010 |
Methods for measuring the thermoelectric Force of noble metal and base matal thermocouple wires 贵金属、廉金属热电偶丝热电动势 测量方法 |
China National Standards Force |
English PDF |
| GB/T 25256-2010 |
Optical functional films - Release film - The measurement of peeling Force at 180°angle and subsequent adhesion 光学功能薄膜 离型膜 180°剥离力和残余黏着率测试方法 |
China National Standards Force |
English PDF |
| GB/T 25043-2010 |
Multiaxial warp-knitted reinForcement for resin-matrix prepreg 连续树脂基预浸料用多轴向经编增强材料 |
China National Standards Force |
English PDF |
| GB/T 24721.5-2009 |
Glass fiber reinForced plastic product for highway - Part 5: Sign base panel 公路用玻璃纤维增强塑料产品 第5部分：标志底板 |
China National Standards Force |
English PDF |
| GB/T 24721.4-2009 |
Glass fiber reinForced plastic product for highway - Part 4: Non-pressure communications well lid 公路用玻璃纤维增强塑料产品 第4部分：非承压通信井盖 |
China National Standards Force |
English PDF |
| GB/T 24721.3-2009 |
Glass fiber reinForced plastic product for highway - Part 3: Duct 公路用玻璃纤维增强塑料产品 第3部分：管道 |
China National Standards Force |
English PDF |
| GB/T 24721.2-2009 |
Glass fiber reinForced plastic product for highway - Part 2: Trunk 公路用玻璃纤维增强塑料产品 第2部分：管箱 |
China National Standards Force |
English PDF |
| GB/T 24721.1-2009 |
Glass fiber reinForced plastic product for highway - Part 1: General rule 公路用玻璃纤维增强塑料产品 第1部分：通则 |
China National Standards Force |
English PDF |
| GB 16413-2009 |
Inspecting specification of glass fiber reinForced plastic product safety property for coal mining 煤矿井下用玻璃钢制品安全性能检验规范 |
China National Standards Force |
English PDF |
| GB/T 24496-2009 |
Grooved vertical joints with connecting bars and concrete infill between large reinForced concrete panels - Laboratory mechanical tests - Effect of tangential loading 钢筋混凝土大板间有连接筋并用混凝土浇灌的键槽式竖向接缝 实验室力学试验 平面内切向荷载的影响 |
China National Standards Force |
English PDF |
| GB/T 7966-2009 |
Acoustics - Ultrasonics power measurement - Radiation Force balances and performance requirements 声学 超声功率测量 辐射力天平法及性能要求 |
China National Standards Force |
English PDF |
| GB 24162-2009 |
Periodic inspection and evaluation of hoop wrapped fibre reinForced composite gas cylinders with metal liners of compressed natural gas for automotive vehicles 汽车用压缩天然气金属内胆纤维环缠绕气瓶定期检验与评定 |
China National Standards Force |
English PDF |
| GB/T 24151-2009 |
Plastics - Glass fiber reinForced and flame retardant poly(butylenes terephthalate) compound 塑料 玻璃纤维增强阻燃聚对苯二甲酸丁二醇酯专用料 |
China National Standards Force |
English PDF |
| GB/T 15908-2009 |
Plastics hoses and hose assemblies - Textile-reinForced types for hydraulic applications - Specification 塑料软管及软管组合件 液压用织物增强型 规范 |
China National Standards Force |
English PDF |
| GB/T 23918-2009 |
Tri-wheel vehicles - Location,maximum actuating Forces and operating method of controls 三轮汽车 操纵机构的位置、最大操纵力和操纵方法 |
China National Standards Force |
English PDF |
| GB/T 23916-2009 |
Low-speed goods vehicles - Location，maximum actuating Forces and operating method of controls 低速货车 操纵机构的位置、最大操纵力和操纵方法 |
China National Standards Force |
English PDF |
| GB/T 3961-2009 |
Terms for fibre reinForced plastics 纤维增强塑料术语 |
China National Standards Force |
English PDF |
| GB/T 23641-2009 |
Fiber reinForced unsaturated polyester moulding-compounds（SMC and BMC）for electrical purposes 电气用纤维增强不饱和聚酯模塑料(SMC/BMC) |
China National Standards Force |
English PDF |
| GB/T 7920.17-2009 |
Steel reinForcement (bar) processing machinery - Terminology 钢筋加工机械 术语 |
China National Standards Force |
English PDF |
| GB 18967-2009 |
Modified bituminous waterproof sheet using polyethylene reinForcement 改性沥青聚乙烯胎防水卷材 |
China National Standards Force |
English PDF |
| GB/T 16778-2009 |
General procedure of failure analysis for fiber reinForced plastic structural products 纤维增强塑料结构件失效分析一般程序 |
China National Standards Force |
English PDF |
| GB/T 14208.4-2009 |
Textile-glass-reinForced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第4部分：表观层间剪切强度的测定 |
China National Standards Force |
English PDF |
| GB/T 14208.3-2009 |
Textile-glass-reinForced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 3: Determination of compressive strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分：压缩强度的测定 |
China National Standards Force |
English PDF |
| GB/T 14208.2-2009 |
Textile-glass-reinForced plastics - Determination of mechanical properties on rods made of roving- reinforced resin - Part 2: Determination of flexural strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第2部分：弯曲强度的测定 |
China National Standards Force |
English PDF |
| GB/T 14208.1-2009 |
Textile-glass-reinForced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 1: General considerations and preparation of rods 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第1部分：通则和棒的制备 |
China National Standards Force |
English PDF |
| GB/T 16167-2009 |
Technical conditions of lifeboat glass fiber reinForced plastics laminate 救生艇壳体玻璃纤维增强塑料层合板技术条件 |
China National Standards Force |
English PDF |
| GB/T 3917.5-2009 |
Textiles - Tear properties of fabrics - Part 5: Determination of tear Force of wing-shaped test specimens (Single tear method) 纺织品 织物撕破性能 第5部分：翼形试样(单缝)撕破强力的测定 |
China National Standards Force |
English PDF |
| GB/T 3917.4-2009 |
Textiles - Tear properties of fabrics - Part 4: Determination of tear Force of tongue-shaped test specimens (Double tear test) 纺织品 织物撕破性能 第4部分：舌形试样（双缝）撕破强力的测定 |
China National Standards Force |
English PDF |
| GB/T 3917.3-2009 |
Textiles - Tear properties of fabrics - Part 3: Determination of tear Force of trapezoid-shaped test specimens 纺织品 织物撕破性能 第3部分：梯形试样撕破强力的测定 |
China National Standards Force |
English PDF |
| GB/T 3917.2-2009 |
Textiles - Tear properties of fabrics - Part 2: Determination of tear Force of trouser-shaped test specimens (Single tear method) 纺织品 织物撕破性能 第2部分：裤形试样（单缝）撕破强力的测定 |
China National Standards Force |
English PDF |
| GB/T 3917.1-2009 |
Textiles - Tear properties of fabrics - Part 1: Determination of tear Force using ballistic pendulum method (Elmendorf) 纺织品 织物撕破性能 第1部分：冲击摆锤法撕破强力的测定 |
China National Standards Force |
English PDF |
| GB/T 11836-2009 |
Concrete and reinForced concrete sewer pipes 混凝土和钢筋混凝土排水管 |
China National Standards Force |
English PDF |
| GB 4706.34-2008 |
Household and similar electrical appliances - Safety - Particular requirements for commercial electric Forced convection ovens, steam cookers and steam-convection ovens 家用和类似用途电器的安全 商用电强制对流烤炉、蒸汽炊具和蒸汽对流炉的特殊要求 |
China National Standards Force |
English PDF |
| GB/T 5382-2008 |
Performance and measurement method for braking Force of motorcycles and mopeds 摩托车和轻便摩托车制动力要求及试验方法 |
China National Standards Force |
English PDF |
| GB/T 22366-2008 |
Sensory analysis - Methodology - General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative Forced-choice(3-AFC) procedure 感官分析 方法学 采用三点选配法（3-AFC）测定嗅觉、味觉和风味觉察阈值的一般导则 |
China National Standards Force |
English PDF |
| GB/T 13332-2008 |
Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool Forces 土方机械 液压挖掘机和挖掘装载机 挖掘力的测定方法 |
China National Standards Force |
English PDF |
| GB/T 10175.2-2008 |
Earth moving machinery - Loaders and backhoe loaders - Part 2: Test method for measuring breakout Forces and lift capacity to maximum lift height 土方机械 装载机和挖掘装载机 第2部分：掘起力和最大提升高度提升能力的测试方法 |
China National Standards Force |
English PDF |
| GB/T 3075-2008 |
Metallic materials - Fatigue testing - Axial-Force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards Force |
English PDF |
| GB/T 1040.5-2008 |
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinForced plastic composites 塑料 拉伸性能的测定 第5部分：单向纤维增强复合材料的试验条件 |
China National Standards Force |
English PDF |
| GB/T 15231-2008 |
Test methods for the properties of glassfibre reinForced cement 玻璃纤维增强水泥性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 22209-2008 |
Marine no-asbestos fiber reinForced rubber gaskets 船用垫片用非石棉纤维增强橡胶板 |
China National Standards Force |
English PDF |
| GB/T 22208-2008 |
Test methods of no-asbestos fiber reinForced rubber gaskets 船用垫片用非石棉纤维增强橡胶板试验方法 |
China National Standards Force |
English PDF |
| GB/T 16638.4-2008 |
Aerodynamics - Concepts，quantities and symbols - Part 4: Aerodynamic Forces，moments，their coefficients and derivatives of aircraft 空气动力学 概念、量和符号 第4部分：飞机的空气动力、力矩及其系数和导数 |
China National Standards Force |
English PDF |
| GB/T 14410.2-2008 |
Flight mechanics - Concepts，quantities and symbols - Part 2：Forces，moments，their coefficients and derivatives 飞行力学 概念、量和符号 第2部分：力、力矩及其系数和导数 |
China National Standards Force |
English PDF |
| GB/T 13985-2008 |
Operating Force and strength of camera 照相机操作力和强度 |
China National Standards Force |
English PDF |
| GB/T 7190.2-2008 |
Glass fiber reinForced plastic cooling tower - Part 2: Large glass fiber reinforced plastic cooling tower 玻璃纤维增强塑料冷却塔 第2部分: 大型玻璃纤维增强塑料冷却塔 |
China National Standards Force |
English PDF |
| GB/T 7190.1-2008 |
Glass fiber reinForced plastic cooling tower - Part 1: Middle and small glass fiber reinforced plastic cooling tower 玻璃纤维增强塑料冷却塔 第1部分: 中小型玻璃纤维增强塑料冷却塔 |
China National Standards Force |
English PDF |
| GB/T 5258-2008 |
Fiber-reinForced plastic composites - Determination of compressive properties in the in-plane direction 纤维增强塑料面内压缩性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 3365-2008 |
Carbon fiber reinForced plastics - Determination of void content and fiber volume content 碳纤维增强塑料孔隙含量和纤维体积含量试验方法 |
China National Standards Force |
English PDF |
| GB/T 2573-2008 |
Test method for aging properties of glass fiber reinForced plastics 玻璃纤维增强塑料老化性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 22082-2008 |
ReinForced concrete segments 预制混凝土衬砌管片 |
China National Standards Force |
English PDF |
| GB/T 16779-2008 |
Test method for tension-tension fatigue of fiber reinForced plastic laminates 纤维增强塑料层合板拉-拉疲劳性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 15928-2008 |
ReinForced plastics based on unsaturated polyester resins - Determination of residual styrene monomer content 不饱和聚酯树脂基增强塑料中残留苯乙烯单体含量的测定 |
China National Standards Force |
English PDF |
| GB/T 15738-2008 |
Test method for resistivity of conducting and antistatic fiber reinForced plastics 导电和抗静电纤维增强塑料电阻率试验方法 |
China National Standards Force |
English PDF |
| GB/T 1458-2008 |
Test method for mechanical properties of ring of filament-winding reinForced plastics 纤维缠绕增强塑料环形试样力学性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 14354-2008 |
Food containers of glass fiber reinForced unsaturated polyester resin 玻璃纤维增强不饱和聚酯树脂食品容器 |
China National Standards Force |
English PDF |
| GB/T 13096-2008 |
Test method for mechanical properties of pultruded glass fiber reinForced plastic rods 拉挤玻璃纤维增强塑料杆力学性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 16825.1-2008 |
Verification of static uniaxial testing machines - Part 1：Tension/compression testing machines - Verification and calibration of the Force-measuring system 静力单轴试验机的检验 第1部分: 拉力和(或)压力试验机测力系统的检验与校准 |
China National Standards Force |
English PDF |
| GB/T 13634-2008 |
Calibration of Force-proving instruments used for the verification of uniaxlial testing machines 单轴试验机检验用标准测力仪的校准 |
China National Standards Force |
English PDF |
| GB/T 13773.2-2008 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum Force to seam rupture using the grab method 纺织品 织物及其制品的接缝拉伸性能 第2部分：抓样法接缝强力的测定 |
China National Standards Force |
English PDF |
| GB/T 13773.1-2008 |
Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum Force to seam rupture using the strip method 纺织品 织物及其制品的接缝拉伸性能 第1部分：条样法接缝强力的测定 |
China National Standards Force |
English PDF |
| GB/T 14319-2008 |
Bonded abrasive products - Vitrified stones for Force-honing and superfinishing 固结磨具 陶瓷结合剂强力珩磨磨石与超精磨磨石 |
China National Standards Force |
English PDF |
| GB/T 18374-2008 |
Vocabulary - Terms for reinForcements 增强材料术语及定义 |
China National Standards Force |
English PDF |
| GB/T 19198-2008 |
Testing method for thermo-electromotive Force of precious metals and their alloys pair up with platinum or copper 贵金属及其合金对铂、对铜热电动势的测量方法 |
China National Standards Force |
English PDF |
| GB 1499.1-2008 |
Steel for the reinForcement of concrete - Part 1: Hot rolled plain bars 钢筋混凝土用钢 第1部分：热轧光圆钢筋 |
China National Standards Force |
English PDF |
| GB/T 21492-2008 |
Glass fiber reinForced plastics jacking pipe 玻璃纤维增强塑料顶管 |
China National Standards Force |
English PDF |
| GB/T 21292-2007 |
Fishing nets Determination of mesh breaking Force of netting 渔网 网目断裂强力的测定 |
China National Standards Force |
English PDF |
| GB/T 1186-2007 |
Rubber hoses,textile-reinForced,for compressed air-Specification 压缩空气用织物增强橡胶软管 |
China National Standards Force |
English PDF |
| GB/T 21239-2007 |
Test method for compression after impact properties of fiber reinForced plastic laminates 纤维增强塑料层合板冲击后压缩性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 21238-2007 |
Glass fiber reinForced plastics mortar pipes 玻璃纤维增强塑料夹砂管 |
China National Standards Force |
English PDF |
| GB/T 21115-2007 |
Measurement for levitation Force of bulk oxide superconductor 块状氧化物超导体磁浮力的测量 |
China National Standards Force |
English PDF |
| GB 1499.2-2007 |
Steel for the reinForcement of concrete - Part 2: Hot rolled bars 钢筋混凝土用钢 第2部分：热轧带肋钢筋 |
China National Standards Force |
English PDF |
| GB/T 6074-2006 |
Leaf chains,clevises and sheaves - Dimensions,measuring Forces and tensile strengths 板式链、连接环和槽轮 - 尺寸、测量力和抗拉强度 |
China National Standards Force |
English PDF |
| GB/T 1040.4-2006 |
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinForced plastic composites 塑料 拉伸性能的测定 第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件 |
China National Standards Force |
English PDF |
| GB/T 2766-2006 |
Haemostatic Forceps with box joint - General specifications 穿鳃式止血钳 通用技术条件 |
China National Standards Force |
English PDF |
| GB/Z 20347-2006 |
Powered lawn,garden and horticultural equipment - Operator controls - Actuating Forces,displacement,location and methods of operation 草坪和园艺动力机械 操作者操纵机构 操纵力、位移量、操纵位置和方法 |
China National Standards Force |
English PDF |
| GB/T 20341-2006 |
Tractors and self-propelled machinery for agriculture and forestry - Operator Controls - Actuating Forces,displacement,location and method of operation 农林拖拉机和自走式机械 操作者操纵机构 操纵力、位移量、操纵位置和方法 |
China National Standards Force |
English PDF |
| GB/T 16752-2006 |
Test methods of concrete and reinForced concrete drainage and sewer pipes 混凝土和钢筋混凝土排水管试验方法 |
China National Standards Force |
English PDF |
| GB/T 11182-2006 |
Steel wire for rubber hose reinForcement 橡胶软管增强用钢丝 |
China National Standards Force |
English PDF |
| GB 50371-2006 |
Code for sound reinForcement system design of auditorium 厅堂扩声系统设计规范 |
China National Standards Force |
English PDF |
| GB/T 16825.2-2005 |
Verification of static uniaxial testing machines-Part 2:Tension creep testing machines-Verification of the applied Force 静力单轴试验机的检验 第2部分：拉力蠕变试验机施加力的检验 |
China National Standards Force |
English PDF |
| GB/T 9979-2005 |
Guide rule of test for mechanical properties of fiber-reinForced plastics at elevated and reduced temperatures 纤维增强塑料高低温力学性能 试验准则 |
China National Standards Force |
English PDF |
| GB/T 8924-2005 |
Test method for flammability characteristics of fiber reinForced plastics-Oxygen index method 纤维增强塑料燃烧性能试验方法 氧指数法 |
China National Standards Force |
English PDF |
| GB/T 8237-2005 |
Liquid unsaturated polyester resin for fiber reinForced plastics 纤维增强塑料用液体不饱和聚酯树脂 |
China National Standards Force |
English PDF |
| GB/T 7559-2005 |
Test method for bearing strength by bolted joints of fiber reinForced plastics laminates 纤维增强塑料层合板 螺栓连接挤压强度试验方法 |
China National Standards Force |
English PDF |
| GB/T 6011-2005 |
Test method for flammability characteristics of fiber-reinForced plastics-Incandescent rod method 纤维增强塑料燃烧性能试验方法 炽热棒法 |
China National Standards Force |
English PDF |
| GB/T 5352-2005 |
Fiber-reinForced thermosetting plastic composites pipe-Determination for external loading properties by parallel-plate loading 纤维增强热固性塑料管平行板 外载性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 5351-2005 |
Fiber-reinForced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure 纤维增强热固性塑料管短时水压 失效压力试验方法 |
China National Standards Force |
English PDF |
| GB/T 5350-2005 |
Fiber-reinForced thermosetting plastic composites pipe-Determination for longitudinal compressive properties 纤维增强热固性塑料管轴向压缩性能 试验方法 |
China National Standards Force |
English PDF |
| GB/T 5349-2005 |
Fiber-reinForced thermosetting plastic composites pipe-Determination of longitudinal tensile properties 纤维增强热固性塑料管轴向拉伸 性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 4944-2005 |
Test method for interlaminar tensile strength of glass fiber reinForced plastic laminates 玻璃纤维增强塑料层合板层间拉伸强度 试验方法 |
China National Standards Force |
English PDF |
| GB/T 4550-2005 |
Preparation of unidirection or ientated fiber reinForced plastic plates for test purposes 试验用单向纤维增强塑料平板的制备 |
China National Standards Force |
English PDF |
| GB/T 3857-2005 |
Test method for chemical resistance of glass fiber reinForced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 3856-2005 |
Test method for compression properties of unidirectional fiber reinForced plastics 单向纤维增强塑料平板压缩性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 3855-2005 |
Test method for resin content of carbon fiber reinForced plastics 碳纤维增强塑料树脂含量试验方法 |
China National Standards Force |
English PDF |
| GB/T 3854-2005 |
Test method for hardness of reinForced plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 |
China National Standards Force |
English PDF |
| GB/T 3140-2005 |
Fiber-reinForced plastics composites-Determination of mean specific heat capacity 纤维增强塑料平均比热容试验方法 |
China National Standards Force |
English PDF |
| GB/T 3139-2005 |
Fiber-reinForced plastics composites-Determination of thermal conductivity 纤维增强塑料导热系数试验方法 |
China National Standards Force |
English PDF |
| GB/T 2577-2005 |
Test method for resin content of glass fiber reinForced plastics 玻璃纤维增强塑料树脂含量试验方法 |
China National Standards Force |
English PDF |
| GB/T 2576-2005 |
Test method for insoluble matter content of resin rsed in fiber reinForced plastics 纤维增强塑料树脂不可溶分含量试验方法 |
China National Standards Force |
English PDF |
| GB/T 2572-2005 |
Fiber-reiForced plastics composites-Determination for mean coefficient of linear expansion 纤维增强塑料平均线膨胀系数试验方法 |
China National Standards Force |
English PDF |
| GB/T 1463-2005 |
Test methods for density and relative density of fiber reinForced plastics 纤维增强塑料密度和相对密度试验方法 |
China National Standards Force |
English PDF |
| GB/T 1462-2005 |
Test methods for water absorption of fiber reinForced plastics 纤维增强塑料吸水性试验方法 |
China National Standards Force |
English PDF |
| GB/T 1451-2005 |
Fiber-reinForced plastics composites---Determination of Charpy impact properties 纤维增强塑料简支梁式冲击韧性 试验方法 |
China National Standards Force |
English PDF |
| GB/T 1450.2-2005 |
Fibre-reinForced plastic composites-Determination of the punch-type shear strength 纤维增强塑料冲压式剪切强度试验方法 |
China National Standards Force |
English PDF |
| GB/T 1450.1-2005 |
Fibre-reinForced plastic composites-Determination of interlaminar shear strength 纤维增强塑料层间剪切强度试验方法 |
China National Standards Force |
English PDF |
| GB/T 1449-2005 |
Fibre-reinForced plastic composites-Determination of flexural properties 纤维增强塑料弯曲性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 1448-2005 |
Fiber-reinForced plastics composites-Determination of compressive properties 纤维增强塑料压缩性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 1447-2005 |
Fiber-reinForced plastics composites---Determination of tensile properties 纤维增强塑料拉伸性能试验方法 |
China National Standards Force |
English PDF |
| GB/T 1446-2005 |
Fiber-reinForced plastics composites-The generals for determination of properties 纤维增强塑料性能试验方法总则 |
China National Standards Force |
English PDF |
| GB/T 14206-2005 |
Corrugated sheets of glass fiber reinForced plastics 玻璃纤维增强聚酯波纹板 |
China National Standards Force |
English PDF |
| GB/T 13564-2005 |
Roller opposite Forces type automobile brake tester 滚筒反力式汽车制动检验台 |
China National Standards Force |
English PDF |
| GB/T 19675.2-2005 |
Specifications of flexible graphite gaskets reinForced with tanged metal sheet for pipe flanges 管法兰用金属冲齿板柔性石墨复合垫片 技术条件 |
China National Standards Force |
English PDF |
| GB/T 19675.1-2005 |
Dimensions of flexible graphite gaskets reinForced with tanged metal sheet for ripe flanges 管法兰用金属冲齿板柔性石墨复合垫片 尺寸 |
China National Standards Force |
English PDF |
| GB/T 19631-2005 |
Glassfiber reinForced cement lightweight hollow panel for partition 玻璃纤维增强水泥轻质多孔隔墙条板 |
China National Standards Force |
English PDF |
| GB/T 19623-2004 |
Labor Force quota for signaling engineering in city transit system 城市轨道交通通信信号工程劳动定员定额 |
China National Standards Force |
English PDF |
| GB/T 19622-2004 |
Labor Force quota for subway engineering in city transit system 城市轨道交通地下铁道工程劳动定员定额 |
China National Standards Force |
English PDF |
| GB/T 19621-2004 |
Labor Force quota for lightrail engineering in city transit system 城市轨道交通轻轨工程劳动定员定额 |
China National Standards Force |
English PDF |
| GB/T 19620-2004 |
Labor Force quota for locomotive power supply engineering in city transit system 城市轨道交通电力牵引供电工程 劳动定员定额 |
China National Standards Force |
English PDF |
| GB/T 19467.2-2004 |
Plastics--Acquisition and presentation of comparable single-point data--Part 2:Long-fibre-reinForced plastics 塑料 可比单点数据的获得和表示 第2部分:长纤维增强材料 |
China National Standards Force |
English PDF |
| GB/T 1634.2-2004 |
Plastics--Determination of temperature of deflection under load--Part 2:Plastics，ebonite and long-fibre-reinForced composites 塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤维增强复合材料 |
China National Standards Force |
English PDF |
| GB/T 19407-2003 |
Agricultural tractor--Maximum actuating Forces required to operate controls 农业拖拉机操纵装置最大操纵力 |
China National Standards Force |
English PDF |
| GB/T 19314.1-2003 |
Small craft--Hull construction and scantlings--Part 1: Materials: Thermosetting resins，glass-fibre reinForcement，reference laminate 小艇 艇体结构和构件尺寸 第1部分:材料:热固性树脂、玻璃纤维增强塑料、基准层合板 |
China National Standards Force |
English PDF |
| GB/T 5009.98-2003 |
Method for analysis of hygienic standard of unsatur-ated polyester resin and glass fibre reinForced plastics used as food containers and packaging materials 食品容器及包装材料用不饱和聚酯树脂及其玻璃钢制品卫生标准的分析方法 |
China National Standards Force |
English PDF |
| GB/T 15329.1-2003 |
Rubber hosesand hose assemblies--Textile-reinForced hydraulic types--Specification--Part 1: Oil-based fluid applications 橡胶软管及软管组合件 织物增强液压型 第1部分:油基流体用 |
China National Standards Force |
English PDF |
| GB/T 19090-2003 |
Rubber hoses and hose assemblies for underground mining--Textile-reinForced air and water type 矿用输送空气和水的织物增强橡胶软管及软管组合件 |
China National Standards Force |
English PDF |
| GB/T 18947-2003 |
Rubber hoses and hose assemblies for underground mining--Wire-reinForced hydraulic type 矿用钢丝增强液压软管及软管组合件 |
China National Standards Force |
English PDF |
| GB/T 4850-2002 |
Test method for unwinding Force of pressure sensitive adhesive tapes at low speed 压敏胶粘带低速解卷强度的测定 |
China National Standards Force |
English PDF |
| GB 18545-2001 |
Occupational exposure limit for fiberglass reinForced plastic dust in the air of workplace 车间空气中玻璃钢粉尘职业接触限值 |
China National Standards Force |
English PDF |
| GB/T 11798.2-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 2:Technical requirements of verification for opposite Force roller brake tester 机动车安全检测设备 检定技术条件 第2部分:滚筒反力式制动试验台检定技术条件 |
China National Standards Force |
English PDF |
| GB/T 4854.3-1998 |
Acoustics--Reference zero for the calibration of audiometric equipment--Part 3:Reference equivalent threshold Force levels for pure tones and bone vibrators 声学 校准测听设备的基准零级 第3部分:骨振器纯音基准等效阈力级 |
China National Standards Force |
English PDF |
| GB/T 17119-1997 |
Continuous mechanical handling equipment--Belt conveyors with carrying idlers--Calculation of operating power and tensile Forces 连续搬运设备 带承载托辊的带式输送机 运行功率和张力的计算 |
China National Standards Force |
English PDF |
| GB/T 2679.17-1997 |
Corrugated fibreboard--Determination of edgewise crush resistance(Edge reinForced method) 瓦楞纸板边压强度的测定(边缘补强法) |
China National Standards Force |
English PDF |
| GB/T 16309-1996 |
Terms of fiber reinForced cement and related products 纤维增强水泥及其制品术语 |
China National Standards Force |
English PDF |
| GB/T 14520-1993 |
Determination of residual styrene monomer content in reinForced plastics based on unsaturated polyester resins by gas chromatography 气相色谱分析法测定不饱和聚酯树脂增强塑料中的残留苯乙烯单体含量 |
China National Standards Force |
English PDF |
| GB/T 14205-1993 |
Cultivating boat of glass fiber reinForced plastics 玻璃纤维增强塑料养殖船 |
China National Standards Force |
English PDF |
| GB/T 13937-1992 |
Rubber--Determinationof dynamic properties of vulcanizates for classification purposes (by Forced sinusoidal shear strain) 分级用硫化橡胶动态性能的测定 强迫正弦剪切应变法 |
China National Standards Force |
English PDF |
| GB/T 12992-1991 |
Measuring methods of thermal characteristic for Forced air cooling of electronic equipment 电子设备强迫风冷热特性测试方法 |
China National Standards Force |
English PDF |
| GB 13115-1991 |
Hygienic standard for unsaturated polyester resin and glass fibre reinForced plastics used asfood containers and packaging materials 食品容器及包装材料用不饱和聚酯树脂及其玻璃钢制品卫生标准 |
China National Standards Force |
English PDF |
| GBJ 130-1990 |
Technical code for reinForced concrete lift-slab structure 钢筋混凝土升板结构技术规范 |
China National Standards Force |
English PDF |
| GB/T 8808-1988 |
Test method for peel Force of flexible laminated plastics 软质复合塑料材料剥离试验方法 |
China National Standards Force |
English PDF |
| Find out:399Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
