Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 26129-2010 |
Contact-type transmitter-receiver Headset for fireman 消防员接触式送受话器 |
China National Standards Head |
 English PDF |
| GB/T 14080-2010 |
General specification of Head stack assembly for hard disk drive 硬磁盘驱动器头堆组件通用规范 |
China National Standards Head |
English PDF |
| GB 25991-2010 |
Automotive Headlamps with LED light sources and/or LED modules 汽车用LED前照灯 |
China National Standards Head |
English PDF |
| GB/T 25888-2010 |
SnakeHead 月鳢 |
China National Standards Head |
English PDF |
| GB/T 25873-2010 |
Round-Headed cabbage - Guide to cold storage and refrigerated transport 结球甘蓝 冷藏和冷藏运输指南 |
China National Standards Head |
English PDF |
| GB/T 25661.2-2010 |
Plano-machining centres with traveling overHead cross rail - Part 2: Specifications 高架横梁移动龙门加工中心 第2部分：技术条件 |
China National Standards Head |
English PDF |
| GB/T 25661.1-2010 |
Plano-machining centres with traveling overHead cross rail - Part 1: Testing of the accuracy 高架横梁移动龙门加工中心 第1部分：精度检验 |
China National Standards Head |
English PDF |
| GB/T 25498.3-2010 |
Electroacoustics - Simulators of human Head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry 电声学 人头模拟器和耳模拟器 第3部分：校准压耳式测听耳机用声耦合器 |
China National Standards Head |
English PDF |
| GB/T 25498.1-2010 |
Electroacoustics - Simulators of human Head and ear - Part 1: Ear simulator for the calibration of supra-aural earphones 电声学 人头模拟器和耳模拟器 第1部分：校准压耳式耳机用耳模拟器 |
China National Standards Head |
English PDF |
| GB/T 25651-2010 |
Hammer crusher - HammerHead ablation 锤式破碎机 锤头磨耗 |
China National Standards Head |
English PDF |
| GB/T 18400.2-2010 |
Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal Heads with vertical primary rotary axis (vertical Z-axis) 加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴) |
China National Standards Head |
English PDF |
| GB/T 18400.1-2010 |
Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory Heads (horizontal Z -axis) 加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards Head |
English PDF |
| GB/T 325.3-2010 |
Packaging container - Steel drums - Part 3：Non-removable Head (tight head) drums with a minimum total capacity of 212l, 216.5l and 230l 包装容器 钢桶 第3部分：最小总容量212L、216.5L和230L闭口钢桶 |
China National Standards Head |
English PDF |
| GB/T 325.2-2010 |
Packaging container - Steel drums - Part 2：Removable Head (open head) drums with a minimum total capacity of 208l, 210l and 216.5l 包装容器 钢桶 第2部分：最小总容量208L、210L和216.5L全开口钢桶 |
China National Standards Head |
English PDF |
| GB/T 25198-2010 |
Heads for pressure vessels 压力容器封头 |
China National Standards Head |
English PDF |
| GB/T 18024.3-2010 |
Graphical symbols for the technical documentation of coal mine machinery - Part 3：Graphical symbols for machinery of coal winning and road Heading 煤矿机械技术文件用图形符号 第3部分：采掘机械图形符号 |
China National Standards Head |
English PDF |
| GB/T 25095-2010 |
Monitoring system of operating status for overHead transmission lines 架空输电线路运行状态监测系统 |
China National Standards Head |
English PDF |
| GB/T 25094-2010 |
General technical specification of corrective maintenance tower for overHead transmission line 架空输电线路抢修杆塔通用技术条件 |
China National Standards Head |
English PDF |
| GB/T 25084-2010 |
Insulator strings and sets for overHead lines with a nominal voltage greater than 1000V - AC power arc tests 标称电压高于1000V的架空线路用绝缘子串和绝缘子串组 交流工频电弧试验 |
China National Standards Head |
English PDF |
| GB/T 25020.4-2010 |
Steel pole for overHead contact system of electrified railway - Part 4：H section pole 电气化铁路接触网钢支柱 第4部分：H形支柱 |
China National Standards Head |
English PDF |
| GB/T 25020.3-2010 |
Steel pole for overHead contact system of electrified railway - Part 3：Steel tube pole 电气化铁路接触网钢支柱 第3部分：环形钢管支柱 |
China National Standards Head |
English PDF |
| GB/T 25020.2-2010 |
Steel pole for overHead contact system of electrified railway - Part 2：Square shape tube steel pole 电气化铁路接触网钢支柱 第2部分：方形钢管支柱 |
China National Standards Head |
English PDF |
| GB/T 25020.1-2010 |
Steel pole for overHead contact system of electrified railway - Part 1：Lattice pole 电气化铁路接触网钢支柱 第1部分：格构式支柱 |
China National Standards Head |
English PDF |
| GB/T 25014-2010 |
Marine bulkHead gearing 船用隔舱传动装置 |
China National Standards Head |
English PDF |
| GB 24932-2010 |
Requirements of seats, their anchorages and Head restrains for all-terrain vehicles 全地形车座椅、座椅固定及头枕要求 |
China National Standards Head |
English PDF |
| GB/T 24955.3-2010 |
Ship and marine technology - Transmitting Heading devices ( THDs ) - Part 3: GNSS principles 船舶和海上技术 艏向发送设备（THDs） 第3部分：GNSS原理 |
China National Standards Head |
English PDF |
| GB/T 24955.2-2010 |
Ship and marine technology - Transmitting Heading devices ( THDs ) - Part 2: Geomagnetic principles 船舶和海上技术 艏向发送设备（THDs） 第2部分：地磁原理 |
China National Standards Head |
English PDF |
| GB/T 24955.1-2010 |
Ship and marine technology - Transmitting Heading devices ( THDs ) - Part 1: Gyro - compasses 船舶和海上技术 艏向发送设备（THDs） 第1部分：陀螺罗经 |
China National Standards Head |
English PDF |
| GB/T 24952-2010 |
Ships and marine technology - Heading control systems for high - speed craft 船舶和海上技术 高速船艏向控制装置 |
China National Standards Head |
English PDF |
| GB 50548-2010 |
Code for investigation and surveying of 330kV~750kV overHead transmission line 330kV~750kV架空输电线路勘测规范 |
China National Standards Head |
English PDF |
| GB 50545-2010 |
Code for design of 110KV~750KV overHead transmission line 110KV~750KV架空输电线路设计规范 |
China DL-Electricity & Power Industry Standards Head |
English PDF |
| GB 50061-2010 |
Code for design of 66kV or under overHead electrical power transmission line 66kV及以下架空电力线路设计规范 |
China National Standards Head |
English PDF |
| GB/T 24834-2009 |
Technical specification for fittings of 1000kV AC overHead transmission line 1000kV交流架空输电线路金具技术规范 |
China National Standards Head |
English PDF |
| GB/T 4232-2009 |
Stainless steel wire for cold Heading and cold forging 冷顶锻用不锈钢丝 |
China National Standards Head |
English PDF |
| GB/T 24572.2-2009 |
Standard practice for separation and concentration of ignitable liquid residues from fire debris samples - Part 2: Direct Headspace vapors sampling 火灾现场易燃液体残留物实验室提取方法 第2部分：直接顶空进样法 |
China National Standards Head |
English PDF |
| GB 11550-2009 |
Strength requirement and test of automobile seats Head restraints 汽车座椅头枕强度要求和试验方法 |
China National Standards Head |
English PDF |
| GB/T 11281-2009 |
General specification for reduction gearHead of electrical micro-machine 微电机用齿轮减速器通用技术条件 |
China National Standards Head |
English PDF |
| GB/T 5953.2-2009 |
Steel wire for cold Heading and cold forging - Part 2: Not intended for heat treatment 冷镦钢丝 第2部分：非热处理型冷镦钢丝 |
China National Standards Head |
English PDF |
| GB/T 5953.1-2009 |
Steel wire for cold Heading and cold forging - Part 1: Intended for heat treatment 冷镦钢丝 第1部分：热处理型冷镦钢丝 |
China National Standards Head |
English PDF |
| GB/T 23461-2009 |
3D dimensions of male adult Headforms 成年男性头型三维尺寸 |
China National Standards Head |
English PDF |
| GB/T 23428-2009 |
Ship and marine technology - Heading control systems 船舶和海上技术 艏向控制装置 |
China National Standards Head |
English PDF |
| GB/T 23308-2009 |
Aluminium-magnesium-silicon alloy wire for overHead line conductors 架空绞线用铝-镁-硅系合金圆线 |
China National Standards Head |
English PDF |
| GB/T 17048-2009 |
Hard-drawn aluminium wire for overHead line conductors 架空绞线用硬铝线 |
China National Standards Head |
English PDF |
| GB/T 22709-2008 |
Residual strength of string insulator units of glass or ceramic material for overHead lines after mechanical damage of the dielectric 架空线路玻璃或瓷绝缘子串元件绝缘体机械破损后的残余强度 |
China National Standards Head |
English PDF |
| GB 11341-2008 |
Safety rules for overHead chain conveyers 悬挂输送机安全规程 |
China National Standards Head |
English PDF |
| GB/T 22437.5-2008 |
Cranes - Design principles for loads and load combinations - Part 5: OverHead traveling and portal bridge cranes 起重机 载荷与载荷组合的设计原则 第5部分：桥式和门式起重机 |
China National Standards Head |
English PDF |
| GB/T 882-2008 |
Clevis pin with Head 销轴 |
China National Standards Head |
English PDF |
| GB/T 880-2008 |
Clevis pins without Head 无头销轴 |
China National Standards Head |
English PDF |
| GB/T 70.3-2008 |
Hexagon socket countersunk Head screws 内六角沉头螺钉 |
China National Standards Head |
English PDF |
| GB/T 70.2-2008 |
Hexagon socket button Head screws 内六角平圆头螺钉 |
China National Standards Head |
English PDF |
| GB/T 70.1-2008 |
Hexagon socket Head cap screws 内六角圆柱头螺钉 |
China National Standards Head |
English PDF |
| GB/T 67-2008 |
Slotted pan Head screws - Product grade A 开槽盘头螺钉 |
China National Standards Head |
English PDF |
| GB/T 22149-2008 |
OverHead projectors - Methods for measuring performance characteristics 透射式投影器 性能特性测定方法 |
China National Standards Head |
English PDF |
| GB/T 22077-2008 |
OverHead electrical conductors-creep test procedures for stranded conductors 架空导线蠕变试验方法 |
China National Standards Head |
English PDF |
| GB/T 1179-2008 |
Round wire concentric lay overHead electrical stranded conductors 圆线同心绞架空导线 |
China National Standards Head |
English PDF |
| GB/T 5055-2008 |
Black carp, grass carp, silver carp and bigHead carp - Parents 青鱼、草鱼、鲢、鳙 亲鱼 |
China National Standards Head |
English PDF |
| GB/T 2554-2008 |
Mechanical dividing Heads 机械分度头 |
China National Standards Head |
English PDF |
| GB/T 5644-2008 |
Flared couplings - BulkHead union elbow 扩口式过板弯通管接头 |
China National Standards Head |
English PDF |
| GB/T 5643-2008 |
Flared couplings - BulkHead union 扩口式过板直通管接头 |
China National Standards Head |
English PDF |
| GB/T 3757-2008 |
24° cone connectors - Weld-in bulkHead straight connector 卡套式过板焊接管接头 |
China National Standards Head |
English PDF |
| GB/T 3749-2008 |
24° cone connectors - BulkHead union elbow 卡套式过板弯通管接头 |
China National Standards Head |
English PDF |
| GB/T 3748-2008 |
24° cone connectors - BulkHead union 卡套式过板直通管接头 |
China National Standards Head |
English PDF |
| GB/T 21719-2008 |
Determination of Head rice yield of paddy 稻谷整精米率检验法 |
China National Standards Head |
English PDF |
| GB/T 21643-2008 |
IP Authentication Header IP认证头(AH) |
China National Standards Head |
English PDF |
| GB/T 5143-2008 |
lndustrial trucks - OverHead guards - Specification and testing 工业车辆 护顶架 技术要求和试验方法 |
China National Standards Head |
English PDF |
| GB/T 21402-2008 |
Agricultural irrigation equipment-Control Heads 农业灌溉设备 水头控制器 |
China National Standards Head |
English PDF |
| GB/T 21421.1-2008 |
Composite string insulator units for overHead lines with a nominal voltage greater than 1000V - Part 1: Standard strength classes and end fittings 标称电压高于1000V架空线路用复合绝缘子串元件 第1部分：标准强度等级和端部附件 |
China National Standards Head |
English PDF |
| GB 4599-2007 |
Motor vehicle Headlamps equipped with filament lamps 汽车用灯丝灯泡前照灯 |
China National Standards Head |
English PDF |
| GB 21260-2007 |
Headlamp cleaner 汽车用前照灯清洗器 |
China National Standards Head |
English PDF |
| GB 21259-2007 |
Headlamps equipped with gas - discharge light sources for motor vehicle 汽车用气体放电光源前照灯 |
China National Standards Head |
English PDF |
| GB/T 878-2007 |
Slotted Headless screws with shank 开槽无头螺钉 |
China National Standards Head |
English PDF |
| GB/T 2673-2007 |
hexalobular socket countersunk Head screws 内六角花形沉头螺钉 |
China National Standards Head |
English PDF |
| GB/T 20957.2-2007 |
Test conditions for machining centres - Part 2: Geometric tests for machines with vertical spindle or universal Heads with vertical primary rotary axis (vertical Z-axis) 精密加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床 几何精度检验(垂直Z轴) |
China National Standards Head |
English PDF |
| GB/T 20957.1-2007 |
Test conditions for precision machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory Heads (horizontal Z axis) 精密加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards Head |
English PDF |
| GB/T 20863.5-2007 |
Cranes - Classification - Part 5: OverHead travelling and portal bridge cranes 起重机 分级 第5部分: 桥式和门式起重机 |
China National Standards Head |
English PDF |
| GB/T 20790-2006 |
Technical requirements for Head-feed combine harvester 半喂入联合收割机 技术条件 |
China National Standards Head |
English PDF |
| GB/T 4169.4-2006 |
Components of injection moulds for plastics - Part 4: Headed guide pillar 塑料注射模零件 第4部分：带头导柱 |
China National Standards Head |
English PDF |
| GB/T 4169.3-2006 |
Components of injection moulds for plastics - Part 3: Headed guide bush 塑料注射模零件 第3部分：带头导套 |
China National Standards Head |
English PDF |
| GB/T 20642-2006 |
Impulse puncture test in air on insulators for overHead lines 高压线路绝缘子空气中冲击击穿试验 |
China National Standards Head |
English PDF |
| GB 11778-2006 |
Fry and fingerling of bigHead carp 鳙鱼苗、鱼种 |
China National Standards Head |
English PDF |
| GB 15083-2006 |
Strength requirement and test of automobile seats, their anchorages and any Head restraints 汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
China National Standards Head |
English PDF |
| GB 50385-2006 |
Code for design of the mine Headframes 矿山井架设计规范 |
China National Standards Head |
English PDF |
| GB/T 15806-2006 |
The methods for calculating fertilization rate of eggs of black carp ,grass carp, silver carp and bigHead carp 青鱼、草鱼、鲢、鳙鱼卵受精率计算方法 |
China National Standards Head |
English PDF |
| GB/T 20303.5-2006 |
Cranes - Cabins - Part 5: OverHead travelling and portal bridge cranes 起重机 司机室 第5部分：桥式和门式起重机 |
China National Standards Head |
English PDF |
| GB/T 12618.6-2006 |
Open end blind rivets with break pull mandrel and protruding Head―property class 40,41 开口型平圆头抽芯铆钉 40、41级 |
China National Standards Head |
English PDF |
| GB/T 12618.5-2006 |
Open end blind rivets with break pull mandrel and protruding Head―property class 20,21 22 开口型平圆头抽芯铆钉 20、21、22级 |
China National Standards Head |
English PDF |
| GB/T 12618.4-2006 |
Open end blind rivets with break pull mandrel and protruding Head―property class 51 开口型平圆头抽芯铆钉 51级 |
China National Standards Head |
English PDF |
| GB/T 12618.3-2006 |
Open end blind rivets witn break pull mandrel and protruding Head―property class 12 开口型平圆头抽芯铆钉 12级 |
China National Standards Head |
English PDF |
| GB/T 12618.2-2006 |
Open end blind rivets with break pull mandrel and protruding Head―property class 30 开口型平圆头抽芯铆钉 30级 |
China National Standards Head |
English PDF |
| GB/T 12618.1-2006 |
Open end blind rivets with break pull mandrel and protruding Head―property class 10,11 开口型平圆头抽芯铆钉 10、11级 |
China National Standards Head |
English PDF |
| GB/T 12617.5-2006 |
Open end blind rivets with break pull mandrel and countersunk Head―property class 20,21,22 开口型沉头抽芯铆钉 20、21、22级 |
China National Standards Head |
English PDF |
| GB/T 12617.4-2006 |
Open end blind rivets with break pull mandrel and countersunk Head―property class 51 开口型沉头抽芯铆钉 51级 |
China National Standards Head |
English PDF |
| GB/T 12617.3-2006 |
Open end blind rivets with break pull mandrel and countersunk Head―property class 12 开口型沉头抽芯铆钉 12级 |
China National Standards Head |
English PDF |
| GB/T 12617.2-2006 |
Open end blind rivets with break pull mandrel and countersunk Head―property class 30 开口型沉头抽芯铆钉 30级 |
China National Standards Head |
English PDF |
| GB/T 12617.1-2006 |
Open end blind rivets with break pull mandrel and countersunk Head―property class 10,11 开口型沉头抽芯铆钉10、11级 |
China National Standards Head |
English PDF |
| GB 5135.13-2006 |
Automatic sprinkler system Part 13:Performance requirements and test methods of drencher Head 自动喷水灭火系统 第13部分:水幕喷头 |
China National Standards Head |
English PDF |
| GB/T 1231-2006 |
Specifications of high strength bolts with large hexagon Head,large hexagon nuts,plain washers for steel structures 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 |
China National Standards Head |
English PDF |
| GB/T 1228-2006 |
High strength bolts with large hexagon Head for steel structures 钢结构用高强度大六角头螺栓 |
China National Standards Head |
English PDF |
| GB/T 20142-2006 |
Composite line post insulators for a.c. overHead lines with a norminal voltage greater than 1000V -- Definitions, Test methods and acceptance criteria 标称电压高于1000V的交流架空线路用线路柱式复合绝缘子-定义、试验方法及接收准则 |
China National Standards Head |
English PDF |
| GB/T 20141-2006 |
OverHead electrical conductors - Formed wire, concentric lay, stranded conductors 型线同心绞架空导线 |
China National Standards Head |
English PDF |
| GB/T 7253-2005 |
Insulators for overHead lines with a nominal voltage above 1000V -- Ceramic or glass insulator units for a.c.systems -- Charateristics of insulator units of the cap and pin type 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性 |
China National Standards Head |
English PDF |
| GB/T 17980.106-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 106:Fungicides against Head smut of corn 农药 田间药效试验准则(二) 第106部分:杀菌剂防治玉米丝黑穗病 |
China National Standards Head |
English PDF |
| GB/T 9074.5-2004 |
Cross recessed small pan Head screw andwasher assemblies with plain washers 十字槽小盘头螺钉和平垫圈组合件 |
China National Standards Head |
English PDF |
| GB/T 9074.20-2004 |
Cross recessed hexagon Head tapping screw with indentation and washer assemblies with plain washers 十字槽凹穴六角头自攻螺钉和平垫圈组合件 |
China National Standards Head |
English PDF |
| GB/T 6321-2004 |
Spring-optical measuring Heads 光学扭簧测微计 |
China National Standards Head |
English PDF |
| GB/T 2672-2004 |
Hexalobular socket pan Head screws 内六角花形盘头螺钉 |
China National Standards Head |
English PDF |
| GB/T 2671.2-2004 |
Hexalobular socket Head cap screws 内六角花形圆柱头螺钉 |
China National Standards Head |
English PDF |
| GB/T 2671.1-2004 |
Hexalobular socket cheese(short)Head screws 内六角花形低圆柱头螺钉 |
China National Standards Head |
English PDF |
| GB/T 2670.3-2004 |
Hexalobular socket raised countersunk(oval)Head tapping screws 内六角花形半沉头自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 2670.2-2004 |
Hexalobular socket countersunk Head tapping screws 内六角花形沉头自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 2670.1-2004 |
Hexalobular socket pan Head tapping screws 内六角花形盘头自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 2674-2004 |
Hexalobular socket raised countersunk Head screws 内六角花形半沉头螺钉 |
China National Standards Head |
English PDF |
| GB/T 13829.9-2004 |
Grooved pins with countersunk Head 沉头槽销 |
China National Standards Head |
English PDF |
| GB/T 13829.8-2004 |
Grooved pins with round Head 圆头槽销 |
China National Standards Head |
English PDF |
| GB/T 12616.1-2004 |
Closed end blind rivets with break pull mandrel and countersunk Head--Property class 11 封闭型沉头抽芯铆钉 11级 |
China National Standards Head |
English PDF |
| GB/T 12615.4-2004 |
Closed end blind rivets with break pull mandrel and protruding Head--Property class 51 封闭型平圆头抽芯铆钉 51级 |
China National Standards Head |
English PDF |
| GB/T 12615.3-2004 |
Closed end blind rivets with break pull mandrel and protruding Head--Property class 06 封闭型平圆头抽芯铆钉 06级 |
China National Standards Head |
English PDF |
| GB/T 12615.2-2004 |
Closed end blind rivets with break pull mandrel and protruding Head--Property class 30 封闭型平圆头抽芯铆钉 30级 |
China National Standards Head |
English PDF |
| GB/T 12615.1-2004 |
Closed end blind rivets with break pull mandrel and protruding Head--Property class 11 封闭型平圆头抽芯铆钉 11级 |
China National Standards Head |
English PDF |
| GB/T 19443-2004 |
Insulators for overHead lines with a nominal voltage above 1000V--Ceramic or glass insulator units for d.c. systems--Difinitions，test methods and acceptance criteria 标称电压高于1000V的架空线路用绝缘子----直流系统用瓷或玻璃绝缘子元件----定义、试验方法和接收准则 |
China National Standards Head |
English PDF |
| GB/T 7424.4-2003 |
Optical fiber cables--Part 4-1:Section specification--Optical fibre composite overHead ground wire 光缆 第4-1部分:分规范 光纤复合架空地线 |
China National Standards Head |
English PDF |
| GB/T 5291.2-2003 |
Die sinking electro-discharge machines(EDM)----Testin of accuracy----Part 2:Two column machines(Slide-Head type and cross-slide table type) 电火花成形机 精度检验 第2部分:双立柱机床(移动主轴头型和十字工作台型) |
China National Standards Head |
English PDF |
| GB/T 5290.2-2003 |
Die sinking electro-discharge machines(EDM)----Parameters----Part 2:Two column machines (Slide-Head type and cross slide table type) 电火花成形机 参数 第2部分:双立柱机床 (移动主轴头型和十字工作台型) |
China National Standards Head |
English PDF |
| GB/T 4678.6-2003 |
Die-casting die components--Part 6: Headed guide bush 压铸模零件 第6部分: 带头导套 |
China National Standards Head |
English PDF |
| GB/T 4678.5-2003 |
Die-casting die components--Part 5: Headed guide pillar 压铸模零件 第5部分: 带头导柱 |
China National Standards Head |
English PDF |
| GB/T 1001.1-2003 |
Insulators for overHead lines with a nominal voltage above 1000V--Part 1: Ceramic or glass insulator units for a.c.systems--Definitions，test methods and acceptance criteria 标称电压高于1000V的架空线路绝缘子 第1部分:交流系统用瓷或玻璃绝缘子元件 定义、试验方法和判定准则 |
China National Standards Head |
English PDF |
| GB 19152-2003 |
Photometric characteristics of moped Headlamps 轻便摩托车前照灯配光性能 |
China National Standards Head |
English PDF |
| GB/T 1565-2003 |
Gib Head taper keys 钩头型 楔键 |
China National Standards Head |
English PDF |
| GB/T 3105-2002 |
General purpose bolts and screws--Radii under the Head 普通螺栓和螺钉 头下圆角半径 |
China National Standards Head |
English PDF |
| GB/T 15856.5-2002 |
Hexagon washer Head drilling screws 六角凸缘自钻自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 15856.4-2002 |
Hexagon flange Head drilling screws with tapping screw thread 六角法兰面自钻自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 15856.3-2002 |
Cross recessed raised countersunk Head drilling screws with tapping screw thread 十字槽半沉头自钻自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 15856.2-2002 |
Cross recessed countersunk Head drilling screws 十字槽沉头自钻自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 15856.1-2002 |
Cross recessed pan Head drilling screws with tapping screw thread 十字槽盘头自钻自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 10433-2002 |
Cheese Head studs for arc stud welding 电弧螺柱焊用圆柱头焊钉 |
China National Standards Head |
English PDF |
| GB/T 18874.5-2002 |
Cranes--Information to be provided--Part 5:OverHead travelling cranes and portal bridge cranes 起重机 供需双方应提供的资料 第5部分:桥式和门式起重机 |
China National Standards Head |
English PDF |
| GB/T 2338-2002 |
Requirements and tests for overHead line spacers 架空电力线路间隔棒技术条件和试验方法 |
China National Standards Head |
English PDF |
| GB/T 7349-2002 |
Methods of measur ement of radio interference from high voltage overHead power transmission line and substation 高压架空送电线、变电站无线电干扰测量方法 |
China National Standards Head |
English PDF |
| GB/T 6478-2001 |
Steels for cold Heading and cold extruding 冷镦和冷挤压用钢 |
China National Standards Head |
English PDF |
| GB/T 11798.6-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 6:Technical requirements of verification for symmetrical beam Headlamp tester 机动车安全检测设备 检定技术条件 第6部分:对称光前照灯检测仪检定技术条件 |
China National Standards Head |
English PDF |
| GB/T 822-2000 |
Cheese Head screws with cross recess 十字槽圆柱头螺钉 |
China National Standards Head |
English PDF |
| GB/T 819.1-2000 |
Countersunk flat Head screws(common head style)with cross recess--Part 1:Steel of property class 4.8 十字槽沉头螺钉 第1部分:钢4.8级 |
China National Standards Head |
English PDF |
| GB/T 818-2000 |
Pan Head screws with cross recess 十字槽盘头螺钉 |
China National Standards Head |
English PDF |
| GB/T 69-2000 |
Countersunk slotted raised Head screws(common head style) 开槽半沉头螺钉 |
China National Standards Head |
English PDF |
| GB/T 65-2000 |
Slotted cheese Head screws 开槽圆柱头螺钉 |
China National Standards Head |
English PDF |
| GB/T 5786-2000 |
Hexagon Head bolts with fine pitch thread--Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards Head |
English PDF |
| GB/T 5785-2000 |
Hexagon Head bolts with fine pitch thread 六角头螺栓 细牙 |
China National Standards Head |
English PDF |
| GB/T 5783-2000 |
Hexagon Head bolts--Full thread 六角头螺栓 全螺纹 |
China National Standards Head |
English PDF |
| GB/T 5782-2000 |
Hexagon Head bolts 六角头螺栓 |
China National Standards Head |
English PDF |
| GB/T 5781-2000 |
Hexagon Head bolts--Full thread--Product gradeC 六角头螺栓 全螺纹 C级 |
China National Standards Head |
English PDF |
| GB/T 5780-2000 |
Hexagon Head bolts--Product grade C 六角头螺栓 C级 |
China National Standards Head |
English PDF |
| GB/T 68-2000 |
Slotted countersunk flat Head screws(common head style) 开槽沉头螺钉 |
China National Standards Head |
English PDF |
| GB/T 17880.5-1999 |
Flat Head hexagon riveted nuts 平头六角铆螺母 |
China National Standards Head |
English PDF |
| GB/T 17880.4-1999 |
120° Small countersunk Head riveted nuts 120°小沉头铆螺母 |
China National Standards Head |
English PDF |
| GB/T 17880.3-1999 |
Small countersunk Head riveted nuts 小沉头铆螺母 |
China National Standards Head |
English PDF |
| GB/T 17880.2-1999 |
Countersunk Head riveted nuts 沉头铆螺母 |
China National Standards Head |
English PDF |
| GB/T 17880.1-1999 |
Flat Head riveted nuts 平头铆螺母 |
China National Standards Head |
English PDF |
| GB 17718-1999 |
BigHead carp 鳙 |
China National Standards Head |
English PDF |
| GB 5948-1998 |
Photometric characteristics of motocycle Headlamps epuipped with filament light sources 摩托车白炽丝光源前照灯配光性能 |
China National Standards Head |
English PDF |
| GB/T 801-1998 |
Cup Head square neck bolts with small head andshort neck--Product grade B 小半圆头低方颈螺栓 B级 |
China National Standards Head |
English PDF |
| GB/T 2900.51-1998 |
Electrotechnical terminology--OverHead lines 电工术语 架空线路 |
China National Standards Head |
English PDF |
| GB/T 2428-1998 |
Head-face dimensions of adults 成年人头面部尺寸 |
China National Standards Head |
English PDF |
| GB/T 17130-1997 |
Water quality--Determination of volatile halogenated organic compounds--Headspace gas chromatography 水质 挥发性卤代烃的测定 顶空气相色谱法 |
China National Standards Head |
English PDF |
| GB/T 819.2-1997 |
Cross recessed countersunk flat Head screws(common head style)--Grade A--Part 2:Steel ofproperty class 8.8，stainless steel and non-ferrous metals 十字槽沉头螺钉 第2部分:钢8.8、不锈钢A2-70和有色金属CU2或CU3 |
China National Standards Head |
English PDF |
| GB/T 5279.2-1997 |
Countersunk flat Head screws--Part 2:Penetration depth of cross recesses 沉头螺钉 第2部分:十字槽插入深度 |
China National Standards Head |
English PDF |
| GB/T 16824.2-1997 |
Hexagon flange Head tapping screws 六角法兰面自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 16824.1-1997 |
Hexagon Head tapping screws with collar 六角凸缘自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 16519-1996 |
General specification of video Head drum assembly for VHS video cassette recorder VHS 录像机磁头鼓组件通用技术条件 |
China National Standards Head |
English PDF |
| GB/T 8494-1996 |
General specification for magnetic Heads for cassette tape recorders 盒式磁带录音机磁头总技术条件 |
China National Standards Head |
English PDF |
| GB/T 15858-1995 |
General specification for full track erasing Heads of VHS video tape recorders VHS录像机全消磁头通用技术条件 |
China National Standards Head |
English PDF |
| GB/T 15857-1995 |
General specification for audio/control Heads of VHS video tape recorders VHS录像机音控磁头通用技术条件 |
China National Standards Head |
English PDF |
| GB/T 790-1995 |
OverHead travelling crane--Span series and lifting height series 电动桥式起重机跨度和起升高度系列 |
China National Standards Head |
English PDF |
| GB/T 15855.2-1995 |
Countersunk Head drive rivets 沉头击芯铆钉 |
China National Standards Head |
English PDF |
| GB/T 15855.1-1995 |
Flat round Head drive rivets 扁圆头击芯铆钉 |
China National Standards Head |
English PDF |
| GB 15707-1995 |
Limits of radio interference from AC high voltage overHead power transmission lines 高压交流架空送电线无线电干扰限值 |
China National Standards Head |
English PDF |
| GB/T 8495-1995 |
Basic parameters and measuring methods of video Heads upper cylinders 视频磁头和上鼓组件基本参数及测量方法 |
China National Standards Head |
English PDF |
| GB/T 4637-1994 |
Head gaps andsound records for three-，four-，or six-track magnetic sound records on 35mmmotion-picture film containing no picture--Positions and width dimensions 35mm磁片上三声轨、四声轨和六声轨磁头隙缝的位置和宽度尺寸 |
China National Standards Head |
English PDF |
| GB/T 726-1994 |
Reciprocating internal combustion engines--Designation of the direction of rotation and of cylinders and valves in cylinder Heads and definition of right-hand and left-hand in line engines and locations on an engine 往复式内燃机 旋转方向、气缸和气缸盖上气门的标志及直列式内燃机右机、左机和发动机方位的定义 |
China National Standards Head |
English PDF |
| GB/T 15412-1994 |
General specification of pan/tilt Head for NBTV camera 应用电视摄像机云台通用技术条件 |
China National Standards Head |
English PDF |
| GB/T 794-1993 |
Strengthened cap Head square neck bolts 加强半圆头方颈螺栓 |
China National Standards Head |
English PDF |
| GB/T 14082-1993 |
Generic specification of 9-track digital magnetic Head for digital magnetic tape unit 9磁道数字磁带机磁头通用技术条件 |
China National Standards Head |
English PDF |
| GB/T 13581-1992 |
Minimum performance requirements on high fidelity Head phones 高保真头戴耳机最低性能要求 |
China National Standards Head |
English PDF |
| GBJ 143-1990 |
Standard for protective spacing of radio interference from overHead electric lines,substations to television transposer station and retransmitting station 架空电力线路、变电所对电视差转台、转播台无线电干扰防护间距标准 |
China National Standards Head |
English PDF |
| GB/T 1000.2-1988 |
Pin insulators of ceramic material for high voltage overHead lines--Dimensions and characteristics 高压线路针式瓷绝缘子尺寸与特性 |
China National Standards Head |
English PDF |
| GB/T 949-1988 |
Slotted raised countersunk Head screws with waisted shank 开槽半沉头不脱出螺钉 |
China National Standards Head |
English PDF |
| GB/T 948-1988 |
Slotted countersunk Head screws with waisted shank 开槽沉头不脱出螺钉 |
China National Standards Head |
English PDF |
| GB/T 947-1988 |
Slotted large raised cheese Head screws 开槽球面大圆柱头螺钉 |
China National Standards Head |
English PDF |
| GB/T 946-1988 |
Slotted raised cheese Head screws with shoulder 开槽球面圆柱头轴位螺钉 |
China National Standards Head |
English PDF |
| GB/T 9456-1988 |
Cross recessed hexagon Head tapping screws withindentation 十字槽凹穴六角自攻螺钉 |
China National Standards Head |
English PDF |
| GB/T 840-1988 |
Plastic diamond knurlHead screws 塑料滚花头螺钉 |
China National Standards Head |
English PDF |
| GB/T 837-1988 |
Slotted pan Head screws with waisted shank 开槽盘头不脱出螺钉 |
China National Standards Head |
English PDF |
| GB/T 836-1988 |
Knurled screws with small Head 滚花小头螺钉 |
China National Standards Head |
English PDF |
| GB/T 833-1988 |
Slotted large cheese Head screws 开槽大圆柱头螺钉 |
China National Standards Head |
English PDF |
| GB/T 830-1988 |
Slotted cheese Head screws with shoulder 开槽圆柱头轴位螺钉 |
China National Standards Head |
English PDF |
| GB/T 828-1988 |
Slotted pan Head set screws with dog point 开槽盘头定位螺钉 |
China National Standards Head |
English PDF |
| GB/T 8-1988 |
Square Head bolts--Product grade C 方头螺栓 C级 |
China National Standards Head |
English PDF |
| GB/T 32.3-1988 |
Hexagon bolts with wire holes on Head--Fine pitch thread--Product grade A and B 六角头头部带孔螺栓 细牙 A和B级 |
China National Standards Head |
English PDF |
| GB/T 32.2-1988 |
Hexagon bolts with wire holes on Head--Reduced shank--Product grade B 六角头头部带孔螺栓 细杆 B级 |
China National Standards Head |
English PDF |
| GB/T 32.1-1988 |
Hexagon bolts with wire holes on Head--Product grade A and B 六角头头部带孔螺栓 A和B级 |
China National Standards Head |
English PDF |
| GB/T 9074.9-1988 |
Cross recessed countersunk Head screw and countersunk serrated external toothed lock washer assemblies 十字槽沉头螺钉和锥形锁紧垫圈组合件 |
China National Standards Head |
English PDF |
| Find out:455Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
