Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 41824-2022 |
Quality management specifications for Metal materials used in items important to safety in nuclear power plants {译} 核电厂安全重要物项用金属材料质量管理规范 |
China National Standards Meta |
 English PDF |
| GB/T 41917-2022 |
Nanotechnology Electron Spin Resonance (ESR) Detection of Reactive Oxygen Species (ROS) Produced by Metal Oxide Nanomaterials {译} 纳米技术 电子自旋共振（ESR）法检测金属氧化物纳米材料产生的活性氧（ROS） |
China National Standards Meta |
English PDF |
| GB/T 15546-2022 |
Metallurgical Roll Terminology {译} 冶金轧辊术语 |
China National Standards Meta |
English PDF |
| GB/T 16825.1-2022 |
Metallic materials - Inspection and calibration of static uniaxial testing machines - Part 1: Tensile and (or) compression testing machines - Inspection and calibration of force measuring systems {译} 金属材料 静力单轴试验机的检验与校准 第1部分：拉力和（或）压力试验机 测力系统的检验与校准 |
China National Standards Meta |
English PDF |
| GB/T 30834-2022 |
Evaluation and statistics of non-Metallic inclusions in steel - Scanning electron microscopy {译} 钢中非金属夹杂物的评定和统计 扫描电镜法 |
China National Standards Meta |
English PDF |
| GB/T 5686.1-2022 |
Ferromanganese, manganese silicon alloy, ferromanganese nitride and Metal manganese Determination of manganese content Potentiometric titration, ammonium nitrate oxidation titration and perchloric acid oxidation titration {译} 锰铁、锰硅合金、氮化锰铁和金属锰 锰含量的测定 电位滴定法、硝酸铵氧化滴定法及高氯酸氧化滴定法 |
China National Standards Meta |
English PDF |
| GB/T 5686.4-2022 |
Ferromanganese, manganese silicon alloy, ferromanganese nitride and Metal manganese Determination of phosphorus content Molybdenum blue spectrophotometry and bismuth phosphorus molybdenum blue spectrophotometry {译} 锰铁、锰硅合金、氮化锰铁和金属锰 磷含量的测定 钼蓝分光光度法和铋磷钼蓝分光光度法 |
China National Standards Meta |
English PDF |
| GB/T 5686.2-2022 |
Determination of ferromanganese, manganese-silicon alloy, ferromanganese nitride and Metal manganese-silicon content Molybdenum blue spectrophotometry, potassium fluorosilicate titration and perchloric acid gravimetric method {译} 锰铁、锰硅合金、氮化锰铁和金属锰 硅含量的测定 钼蓝分光光度法、氟硅酸钾滴定法和高氯酸重量法 |
China National Standards Meta |
English PDF |
| GB/T 41079.2-2022 |
Methods for Determination of Physical Properties of Liquid Metals Part 2: Determination of Electrical Conductivity {译} 液态金属物理性能测定方法 第2部分：电导率的测定 |
China National Standards Meta |
English PDF |
| GB/T 41756-2022 |
Corrosion of Metals and alloys - Method for assessing resistance to atmospheric corrosion of low alloy steels {译} 金属和合金的腐蚀 低合金钢耐大气腐蚀评估方法 |
China National Standards Meta |
English PDF |
| GB/T 41739-2022 |
Test method for dimensional stability of Metal matrix composites—Cold and heat cycle method {译} 金属基复合材料尺寸稳定性检测方法 冷热循环法 |
China National Standards Meta |
English PDF |
| GB/T 41738-2022 |
Test method for mode I interlaminar fracture toughness (GIC) of fiber Metal laminates {译} 纤维金属层板I型层间断裂韧性（GIC）试验方法 |
China National Standards Meta |
English PDF |
| GB/T 26957-2022 |
Destructive testing of welds in Metallic materials - Tensile test methods for cross joints and lap joints {译} 金属材料焊缝破坏性试验 十字接头和搭接接头拉伸试验方法 |
China National Standards Meta |
English PDF |
| GB/T 2652-2022 |
Destructive test of welds in Metallic materials Longitudinal tensile test of weld metal in fusion welded joints {译} 金属材料焊缝破坏性试验 熔化焊接头焊缝金属纵向拉伸试验 |
China National Standards Meta |
English PDF |
| GB/T 20092.2-2022 |
Chinese News Information Content Part 2: News Metadata {译} 中文新闻信息内容 第2部分：新闻元数据 |
China National Standards Meta |
English PDF |
| GB/T 20568-2022 |
Metallic materials - Hydraulic test method for pipe rings {译} 金属材料 管环液压试验方法 |
China National Standards Meta |
English PDF |
| GB/T 3658-2022 |
Ring test method for magnetic properties of soft magnetic Metal materials and powder metallurgy materials in the frequency range of 20Hz to 100kHz {译} 软磁金属材料和粉末冶金材料20Hz～100kHz频率范围磁性能的环形试样测量方法 |
China National Standards Meta |
English PDF |
| GB/T 41706-2022 |
Metal powders - Determination of non-metallic inclusions in metal powders for powder forging {译} 金属粉末 粉末锻造用金属粉末中非金属夹杂物的测定方法 |
China National Standards Meta |
English PDF |
| GB/T 41978-2022 |
Additive manufacturing—Metal powder hollow flour rate detection method {译} 增材制造 金属粉末空心粉率检测方法 |
China National Standards Meta |
English PDF |
| GB/T 2650-2022 |
Destructive testing of welds in Metallic materials Impact testing {译} 金属材料焊缝破坏性试验 冲击试验 |
China National Standards Meta |
English PDF |
| GB/T 41859-2022 |
Sheet Metal precision cold-formed process specification {译} 金属板材精密冷弯成形 工艺规范 |
China National Standards Meta |
English PDF |
| GB/T 3488.4-2022 |
Cemented carbide - Metallographic determination of microstructure - Part 4: Metallographic determination of porosity, non-combined carbon defects and decarburized phases {译} 硬质合金 显微组织的金相测定 第4部分：孔隙度、非化合碳缺陷和脱碳相的金相测定 |
China National Standards Meta |
English PDF |
| GB/T 41857-2022 |
Sheet Metal fine-blanking extrusion composite formed parts General technical requirements {译} 金属板料精冲挤压复合成形件 通用技术条件 |
China National Standards Meta |
English PDF |
| GB/T 40541-2021 |
Structural design requirements of Metal pressure vessels for space system 航天金属压力容器结构设计要求 |
China National Standards Meta |
English PDF |
| GB/T 40516-2021 |
Metal valves for use in marine J-flanged pipe face-to-face and centre-to-face dimensions J类船用法兰连接金属阀门的结构长度 |
China National Standards Meta |
English PDF |
| GB/T 40380.2-2021 |
Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第2部分：高温时流速的测定 |
China National Standards Meta |
English PDF |
| GB/T 40410-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled method 金属材料 多轴疲劳试验 轴向-扭转应变控制方法 |
China National Standards Meta |
English PDF |
| GB/T 40404-2021 |
Slag material—Measurement of melting temperature—High temperature Metallographic method 渣类材料 熔化温度的测定 高温金相法 |
China National Standards Meta |
English PDF |
| GB/T 40403-2021 |
Corrosion of Metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards Meta |
English PDF |
| GB/T 40393-2021 |
Corrosion of Metals and alloys—Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels 金属和合金的腐蚀 奥氏体不锈钢晶间腐蚀敏感性加速腐蚀试验方法 |
China National Standards Meta |
English PDF |
| GB/T 40389-2021 |
Sintered Metal materials, excluding hardmetals—Measurement of surface roughness 烧结金属材料（不包括硬质合金） 表面粗糙度的测定 |
China National Standards Meta |
English PDF |
| GB/T 40368-2021 |
Determination of kunitz trypsin inhibitor of plant Metabolites—Enzyme-linked immunosorbent assay 植物代谢产物胰蛋白酶抑制因子测定 酶联免疫吸附法 |
China National Standards Meta |
English PDF |
| GB/T 40360-2021 |
Still beverage Metal cans filling and sealing machine—General technical specifications 不含气饮料金属罐灌装封罐机 通用技术条件 |
China National Standards Meta |
English PDF |
| GB/T 40340-2021 |
Composites and Metal assemblies—Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests 复合材料与金属组合件 碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验 盐雾试验 |
China National Standards Meta |
English PDF |
| GB/T 40339-2021 |
Corrosion of Metals and alloys—Guidelines for assessing the significances of stress corrosion cracks detected in service 金属和合金的腐蚀 服役中检出的应力腐蚀裂纹的重要性评估导则 |
China National Standards Meta |
English PDF |
| GB/T 40338-2021 |
Corrosion of Metals and alloys—Exfoliation corrosion testing of aluminium alloys 金属和合金的腐蚀 铝合金剥落腐蚀试验 |
China National Standards Meta |
English PDF |
| GB/T 40314-2021 |
Corrosion of Metals and alloys—Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel 金属和合金的腐蚀 适用于不锈钢平板或管状试样的碟形弹簧缝隙腐蚀构型 |
China National Standards Meta |
English PDF |
| GB/T 40304-2021 |
Determination of content of nonMetallic inclusions in steel—Billet full section method 钢中非金属夹杂物含量的测定 钢坯全截面法 |
China National Standards Meta |
English PDF |
| GB/T 40299-2021 |
Corrosion of Metals and alloys—Conventions applicable to electrochemical measurements in corrosion testing 金属和合金的腐蚀 腐蚀试验电化学测量方法适用惯例 |
China National Standards Meta |
English PDF |
| GB/T 40281-2021 |
Determination of content of nonMetallic inclusions in steel—Extremum analytical method 钢中非金属夹杂物含量的测定 极值分析法 |
China National Standards Meta |
English PDF |
| GB/T 24524-2021 |
Metallic materials—Sheet and strip—Hole expanding test 金属材料 薄板和薄带 扩孔试验方法 |
China National Standards Meta |
English PDF |
| GB/T 24183-2021 |
Metallic materials—Sheet and Strip—Earing test 金属材料 薄板和薄带 制耳试验方法 |
China National Standards Meta |
English PDF |
| GB/T 17850.9-2021 |
Preparation of steel substrates before application of paints and related products—Specifications for non-Metallic blast-cleaning abrasives—Part 9: Staurolite 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分：十字石 |
China National Standards Meta |
English PDF |
| GB/T 15970.10-2021 |
Corrosion of Metals and alloys—Stress corrosion testing—Part l0: Reverse U-bend method 金属和合金的腐蚀 应力腐蚀试验 第10部分：反向U型弯曲试验方法 |
China National Standards Meta |
English PDF |
| GB/T 15078-2021 |
Testing method for contact resistance of precious Metals electrical contact materials 贵金属电触点材料接触电阻的测量方法 |
China National Standards Meta |
English PDF |
| GB/T 7729-2021 |
Chemical analysis of Metallurgical products—General rule for spectrophotometric methods 冶金产品化学分析 分光光度法通则 |
China National Standards Meta |
English PDF |
| GB/T 7728-2021 |
Chemical analysis of Metallurgical products—General rule for flame atomic absorption spectrometric methods 冶金产品化学分析 火焰原子吸收光谱法通则 |
China National Standards Meta |
English PDF |
| GB/T 3075-2021 |
Metallic materials—Fatigue testing—Axial force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards Meta |
English PDF |
| GB/T 1425-2021 |
Determination of melting temperature range for precious Metals and their alloys—Testing method of thermal analysis 贵金属及其合金熔化温度范围的测定 热分析试验方法 |
China National Standards Meta |
English PDF |
| GB/T 40380.1-2021 |
Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第1部分：高温时松装密度的测定 |
China National Standards Meta |
English PDF |
| GB/T 40377-2021 |
Corrosion of Metals and alloys—Determination of AC corrosion—Protection criteria 金属和合金的腐蚀 交流腐蚀的测定 防护准则 |
China National Standards Meta |
English PDF |
| GB/T 40375-2021 |
Technical specification of corrosion control operation for Metal connection (fastening) structure 金属连接（紧固）结构耐蚀作业技术规范 |
China National Standards Meta |
English PDF |
| GB/T 40374-2021 |
HardMetals—Determination of lead and cadmium content—Flame atomic absorption spectrometric method and inductively coupled plasma atomic emission spectrometry 硬质合金化学分析方法 铅量和镉量的测定 火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法 |
China National Standards Meta |
English PDF |
| GB/T 16840.4-2021 |
Technical determination methods for electrical fire evidence—Part 4: Metallographic analysis method 电气火灾痕迹物证技术鉴定方法 第4部分：金相分析法 |
China National Standards Meta |
English PDF |
| GB/T 27926.1-2021 |
Financial services — Universal financial industry message scheme — Part 1: Metamodel 金融服务 金融业通用报文方案 第1部分：元模型 |
China National Standards Meta |
English PDF |
| GB/T 40220-2021 |
Determination of soybean agglutinin of plant Metabolites—Enzyme-linked immunosorbent assay 植物代谢产物大豆凝集素测定 酶联免疫吸附法 |
China National Standards Meta |
English PDF |
| GB/T 40208-2021 |
Core Metadata of logistics information resource 物流信息资源核心元数据 |
China National Standards Meta |
English PDF |
| GB/T 40262-2021 |
Metal coating fabric—Determination of metal layer adhesive force—Tape method 金属镀膜织物 金属层结合力的测定 胶带法 |
China National Standards Meta |
English PDF |
| GB/T 40226-2021 |
Detection of environmental microbial Metagenome—High throughput sequencing 环境微生物宏基因组检测 高通量测序法 |
China National Standards Meta |
English PDF |
| GB/T 40223-2021 |
Determination of free gossypol of plant Metabolites—Enzyme-linked immunosorbent assay 植物代谢产物游离棉酚测定 酶联免疫吸附法 |
China National Standards Meta |
English PDF |
| GB/T 40114-2021 |
Jewellery—Determination of precious Metal content—Difference method using inductively coupled plasma optical emission spectroscopy 首饰 贵金属含量的测定 ICP差减法 |
China National Standards Meta |
English PDF |
| GB/T 19216.3-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a Metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards Meta |
English PDF |
| GB/T 40073-2021 |
External pressure strength test procedure for Metal pressure hull of submersibles 潜水器金属耐压壳外压强度试验方法 |
China National Standards Meta |
English PDF |
| GB/T 40072-2021 |
Strength test method for submersible Metallic framework 潜水器金属框架强度试验方法 |
China National Standards Meta |
English PDF |
| GB/T 40064-2021 |
External pressure strength test procedure for Metal pressure hull of submersibles 节能技术评价导则 |
China National Standards Meta |
English PDF |
| GB/T 40019-2021 |
General Metadata for fundamental manufacturing process 基础制造工艺通用元数据 |
China National Standards Meta |
English PDF |
| GB/T 40016-2021 |
General Metadata for fundamental part and component 基础零部件通用元数据 |
China National Standards Meta |
English PDF |
| GB/T 39994-2021 |
Determination of six Metal elements (iron, calcium, magnesium, zinc, titanium,copper) in polyolefin pipe system 聚烯烃管道中六种金属元素（铁、钙、镁、锌、钛、铜）的测定 |
China National Standards Meta |
English PDF |
| GB/T 26077-2021 |
Metallic materials—Fatigue testing—Axial-strain-controlled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards Meta |
English PDF |
| GB/T 9790-2021 |
Metallic materials—Vickers and Knoop microhardness tests of metallic and other inorganic coatings 金属材料 金属及其他无机覆盖层的维氏和努氏显微硬度试验 |
China National Standards Meta |
English PDF |
| GB/T 3488.3-2021 |
HardMetals—Metallographic determination of microstructure—Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals 硬质合金 显微组织的金相测定 第3部分：Ti（C,N）和WC立方碳化物基硬质合金显微组织的金相测定 |
China National Standards Meta |
English PDF |
| GB/T 39957-2021 |
High pressure Metal die casting units—Technical requirements 压铸单元 技术条件 |
China National Standards Meta |
English PDF |
| GB/T 39913-2021 |
General science and technology infrastructure -- User Metadata 科技平台 用户元数据 |
China National Standards Meta |
English PDF |
| GB/T 39897-2021 |
Determination of volatile organic compounds and aldehydes and ketones in nonMetallic parts of vehicles 车内非金属部件挥发性有机物和醛酮类物质检测方法 |
China National Standards Meta |
English PDF |
| GB/T 39859-2021 |
Gallium-based liquid Metal 镓基液态金属 |
China National Standards Meta |
English PDF |
| GB/T 39794.1-2021 |
Test method for wind uplift resistance of Metal roof -- Part 1: Static pressure method 金属屋面抗风掀性能检测方法 第1部分：静态压力法 |
China National Standards Meta |
English PDF |
| GB/T 39789-2021 |
Non-destructive testing of welds—Eddy current-video integrated testing method of Metal composites weld 焊缝无损检测 金属复合材料焊缝涡流视频集成检测方法 |
China National Standards Meta |
English PDF |
| GB/T 22373-2021 |
Metadata of standard literature 标准文献元数据 |
China National Standards Meta |
English PDF |
| GB/T 19934.1-2021 |
Hydraulic fluid power—Fatigue pressure testing of Metal pressure-containing envelopes—Part 1: Test method 液压传动 金属承压壳体的疲劳压力试验 第1部分：试验方法 |
China National Standards Meta |
English PDF |
| GB/T 18329.4-2021 |
Plain bearings—Metallic multilayer plain bearings—Part 4:Non-destructive ultrasonic transmission testing of bond of thickness greater than or equal to 0.3 mm 滑动轴承 多层金属滑动轴承 第4部分: 合金厚度≥0.3mm的结合质量超声穿透无损检测 |
China National Standards Meta |
English PDF |
| GB/T 18329.3-2021 |
Plain bearings—Metallic multilayer plain bearings—Part 3: Non-destructive penetrant testing 滑动轴承 多层金属滑动轴承 第3部分：无损渗透检验 |
China National Standards Meta |
English PDF |
| GB/T 5162-2021 |
Metallic powders—Determination of tap density 金属粉末 振实密度的测定 |
China National Standards Meta |
English PDF |
| GB/T 41107.2-2021 |
Destructive tests on welds in Metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第2部分：自拘束试验 |
China National Standards Meta |
English PDF |
| GB/T 41107.1-2021 |
Destructive tests on welds in Metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 1: General 金属材料焊缝破坏性试验 焊件的热裂纹试验 弧焊方法 第1部分：总则 |
China National Standards Meta |
English PDF |
| GB/T 22565.1-2021 |
Metallic materials -- Sheet and strip -- Method for spring back evaluation -- Part 1: Stretch bending 金属材料 薄板和薄带 回弹性能评估方法 第1部分：拉弯法 |
China National Standards Meta |
English PDF |
| GB/T 3670-2021 |
Covered electordes for manual Metal arc welding of copper and copper alloys 铜及铜合金焊条 |
China National Standards Meta |
English PDF |
| GB/T 41110-2021 |
Tubular cored electrodes for gas shielded and non-gas shielded Metal arc welding of nickel and nickel alloys 镍及镍合金药芯焊丝 |
China National Standards Meta |
English PDF |
| GB/T 41139-2021 |
Requirements of standard conformance testing for information classification coding and Metadata 信息分类编码及元数据标准符合性测试要求 |
China National Standards Meta |
English PDF |
| GB/T 41120-2021 |
Non-destructive testing -- Test method for non-ferromagnetic Metallic component pulsed eddy current testing 无损检测 非铁磁性金属材料脉冲涡流检测 |
China National Standards Meta |
English PDF |
| GB/T 41079.1-2021 |
Test methods for physical properties of liquid Metals—Part 1:Determination of density 液态金属物理性能测定方法 第1部分：密度的测定 |
China National Standards Meta |
English PDF |
| GB/T 41154-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled thermo-mechanical fatigue testing method 金属材料 多轴疲劳试验 轴向-扭转应变控制热机械疲劳试验方法 |
China National Standards Meta |
English PDF |
| GB/T 8643-2021 |
Determination of lubricant content in lubricated Metal-powder mixes—Soxhlet extraction method 含润滑剂金属粉末中润滑剂含量的测定 索格利特（Soxhlet）萃取法 |
China National Standards Meta |
English PDF |
| GB/T 41080-2021 |
Metallographic inspection method for molybdenum and molybdenum alloys 钼及钼合金金相检验方法 |
China National Standards Meta |
English PDF |
| GB/T 9441-2021 |
Metallographic test method for spheroidal graphite cast iron 球墨铸铁金相检验 |
China National Standards Meta |
English PDF |
| GB/T 41155-2021 |
Sintered Metal materials,excluding hardmetals—Fatigue test pieces 烧结金属材料（不包括硬质合金） 疲劳试样 |
China National Standards Meta |
English PDF |
| GB/T 228.1-2021 |
Metallic materials—Tensile testing—Part 1: Method of test at room temperature 金属材料 拉伸试验 第1部分:室温试验方法 |
China National Standards Meta |
English PDF |
| GB/T 41058-2021 |
Methods for detecting heavy Metals in sludge and contaminated soil for cement kiln coprocessing 水泥窑协同处置污泥及污染土中重金属的检测方法 |
China National Standards Meta |
English PDF |
| GB/T 41049-2021 |
Test method for flexural properties of fibre Metal laminates 纤维金属层板弯曲性能试验方法 |
China National Standards Meta |
English PDF |
| GB/T 31723.414-2021 |
Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (field conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-14部分：电磁兼容 电缆组件(现场条件)的耦合衰减 吸收钳法 |
China National Standards Meta |
English PDF |
| GB/T 31723.413-2021 |
Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分：电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 |
China National Standards Meta |
English PDF |
| GB/T 31723.412-2021 |
Metallic communication cable test methods—Part 4-12: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of connecting hardware—Absorbing clamp method 金属通信电缆试验方法 第4-12部分：电磁兼容 连接硬件的耦合衰减或屏蔽衰减 吸收钳法 |
China National Standards Meta |
English PDF |
| GB/T 41012-2021 |
Technical specifications for collection and recovery of non-ferrous Metal contained solid waste 含有色金属固体废物回收利用技术规范 |
China National Standards Meta |
English PDF |
| GB/T 27552-2021 |
Destructive tests on welds in Metallic materials—Microhardness testing of welded joints 金属材料焊缝破坏性试验 焊接接头显微硬度试验 |
China National Standards Meta |
English PDF |
| GB/T 12690.8-2021 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides—Part 8:Determination of sodium content 稀土金属及其氧化物中非稀土杂质化学分析方法 第8部分：钠量的测定 |
China National Standards Meta |
English PDF |
| GB/T 21973-2021 |
YZR3 series wound-rotor three-phase induction motors for crane and Metallurgical applications—Technical specification YZR3系列起重及冶金用绕线转子三相异步电动机 技术条件 |
China National Standards Meta |
English PDF |
| GB/T 15717-2021 |
Test method for vacuum-deposited Metal thickness—Electric resistance method 真空金属镀层厚度测试方法 电阻法 |
China National Standards Meta |
English PDF |
| GB/T 40804-2021 |
Short-term capability evaluation of machining processes on Metal-cutting machine tools 金属切削机床加工过程的短期能力评估 |
China National Standards Meta |
English PDF |
| GB/T 40806-2021 |
Airborne noise emitted by machine tools—Operating conditions for Metal-cutting machines 机床发射空气传播噪声 金属切削机床的操作条件 |
China National Standards Meta |
English PDF |
| GB/T 22930.2-2021 |
Leather and fur—Chemical determination of Metal content—Part 2:Total metal content 皮革和毛皮 金属含量的化学测定 第2部分：金属总量 |
China National Standards Meta |
English PDF |
| GB/T 22930.1-2021 |
Leather and fur—Chemical determination of Metal content—Part 1:Extractable metals 皮革和毛皮 金属含量的化学测定 第1部分：可萃取金属 |
China National Standards Meta |
English PDF |
| GB/T 39560.5-2021 |
Determination of certain substances in electrical and electronic products—Part 5: Cadmium，lead and chromium in polymers and electronics and cadmium and lead in Metals by AAS，AFS，ICP-OES and ICP-MS 电子电气产品中某些物质的测定 第5部分： AAS、AFS、ICP-OES和ICP-MS法测定聚合物和电子件中镉、铅、铬以及金属中镉、铅的含量 |
China National Standards Meta |
English PDF |
| GB/T 39560.4-2021 |
Determination of certain substances in electrical and electronic products—Part 4: Mercury in polymers, Metals and electronics by CV-AAS, CV-AFS , ICP-OES and ICP-MS 电子电气产品中某些物质的测定 第4部分：CV-AAS、CV-AFS、ICP-OES和ICP-MS测定聚合物、金属和电子件中的汞 |
China National Standards Meta |
English PDF |
| GB/T 12690.4-2021 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides—Part 4: Determination of oxygen and nitrogen contents—Impulse-infrared absorption and impulse-thermal conductivity method 稀土金属及其氧化物中非稀土杂质化学分析方法 第4部分：氧、氮量的测定 脉冲-红外吸收法和脉冲-热导法 |
China National Standards Meta |
English PDF |
| GB/T 40795.2-2021 |
Chemical analysis methods of lanthanum-cerium Metals and their compounds—Part 2:Determination of rare earth content 镧铈金属及其化合物化学分析方法 第2部分：稀土量的测定 |
China National Standards Meta |
English PDF |
| GB/T 40795.1-2021 |
Chemical analysis method of lanthanum-cerium Metals and their compounds—Part 1:Determination of cerium content—Ammonium ferrous sulfate titration method 镧铈金属及其化合物化学分析方法 第1部分：铈量的测定 硫酸亚铁铵滴定法 |
China National Standards Meta |
English PDF |
| GB/T 40854-2021 |
Lanthanum-cerium Metal 镧铈金属 |
China National Standards Meta |
English PDF |
| GB/T 40796-2021 |
Corrosion of Metals and alloys—Guidelines for applying statistics to analysis of corrosion data 金属和合金的腐蚀 腐蚀数据分析应用统计学指南 |
China National Standards Meta |
English PDF |
| GB/T 40793-2021 |
NonMetallic coatings for sintered neodymium iron boron permanent magnets 烧结钕铁硼表面涂层 |
China National Standards Meta |
English PDF |
| GB/T 18115.4-2021 |
Chemical analysis methods of rare earth impurities in rare earth Metals and their oxides -- Part 4: Determination of lanthanum, cerium, praseodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yt 稀土金属及其氧化物中稀土杂质化学分析方法 第4部分：钕中镧、铈、镨、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钇量的测定 |
China National Standards Meta |
English PDF |
| GB/T 12690.7-2021 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides—Part 7: Determination of silicon content 稀土金属及其氧化物中非稀土杂质化学分析方法 第7部分：硅量的测定 |
China National Standards Meta |
English PDF |
| GB/T 11809-2021 |
Test method of weld of fuel rod for PWR—Metallographic examination and radiographic testing 压水堆燃料棒焊缝检验方法 金相检验和X射线照相检验 |
China National Standards Meta |
English PDF |
| GB 39800.3-2020 |
Specifications for the provision of personal protective equipment—Part 3：Metallurgy,nonferrous metals 个体防护装备配备规范 第3部分：冶金、有色 |
China National Standards Meta |
English PDF |
| GB/T 39534-2020 |
Corrosion of Metals and alloys—Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids 金属和合金的腐蚀 液体中不锈钢和镍基合金均匀腐蚀速率测定方法 |
China National Standards Meta |
English PDF |
| GB 16423-2020 |
Safety regulation for Metal and nonmetal mines 金属非金属矿山安全规程 |
China National Standards Meta |
English PDF |
| GB/T 39137-2020 |
Determination for the orientation of refractory Metal single crystal 难熔金属单晶晶向测定方法 |
China National Standards Meta |
English PDF |
| GB/T 39145-2020 |
Test method for the content of surface Metal elements on silicon wafers—Inductively coupled plasma mass spectrometry 硅片表面金属元素含量的测定 电感耦合等离子体质谱法 |
China National Standards Meta |
English PDF |
| GB/T 39153-2020 |
Metastable decomposition strengthened Cu-Ni-Sn alloy rod 亚稳分解强化铜-镍-锡合金棒材 |
China National Standards Meta |
English PDF |
| GB/T 39154-2020 |
Corrosion of Metals and alloys—Cathodic protection of steel in concrete 金属和合金的腐蚀 混凝土用钢筋的阴极保护 |
China National Standards Meta |
English PDF |
| GB/T 39155-2020 |
Corrosion of Metals and alloys—Cathodic protection of harbour installations 金属和合金的腐蚀 海港设施的阴极保护 |
China National Standards Meta |
English PDF |
| GB/T 39203-2020 |
Technical specifications for extraction of valuable Metals from copper smelting dust 铜冶炼烟灰提取有价金属技术规范 |
China National Standards Meta |
English PDF |
| GB/T 10573-2020 |
Tensile testing method for fine wire of nonferrous Metals 有色金属细丝拉伸试验方法 |
China National Standards Meta |
English PDF |
| GB/T 22869-2020 |
Interleaving paper for cold rolled Metal sheets 冷轧金属板衬纸 |
China National Standards Meta |
English PDF |
| GB/T 229-2020 |
Metallic materials—Charpy pendulum impact test method 金属材料 夏比摆锤冲击试验方法 |
China National Standards Meta |
English PDF |
| GB/T 38981-2020 |
Sintered-Metal injection-moulded materials—Specifications 烧结金属注射成形材料 规范 |
China National Standards Meta |
English PDF |
| GB/T 18661-2020 |
Metal-halide lamp(ScI3-NaI series)—Performance requirements 金属卤化物灯（钪钠系列） 性能要求 |
China National Standards Meta |
English PDF |
| GB/T 38967-2020 |
Categories of typical structural elements for civil aircraft sheet Metal parts 民用飞机钣金件典型结构要素分类 |
China National Standards Meta |
English PDF |
| GB/T 39029-2020 |
Technical specification of efficacy evaluation for removing of heavy Metal by biological products 生物产品去除重金属功效评价技术规范 |
China National Standards Meta |
English PDF |
| GB/T 39073-2020 |
Brand evaluation—Core Metadata specification 品牌评价 核心元数据规范 |
China National Standards Meta |
English PDF |
| GB/T 38783-2020 |
Method of coating thickness determination for precious Metal composites by scanning electron microscope 贵金属复合材料覆层厚度的扫描电镜测定方法 |
China National Standards Meta |
English PDF |
| GB/T 20671.3-2020 |
Classification system and test methods for nonMetallic gasket materials—Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分:垫片材料耐液性试验方法 |
China National Standards Meta |
English PDF |
| GB/T 20671.5-2020 |
Classification system and test methods for nonMetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials 非金属垫片材料分类体系及试验方法 第5部分：垫片材料蠕变松弛率试验方法 |
China National Standards Meta |
English PDF |
| GB/T 20671.6-2020 |
Classification system and test methods for nonMetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分：垫片材料与金属表面黏附性试验方法 |
China National Standards Meta |
English PDF |
| GB/T 13912-2020 |
Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods 金属覆盖层 钢铁制件热浸镀锌层 技术要求及试验方法 |
China National Standards Meta |
English PDF |
| GB/T 11376-2020 |
Metallic and other inorganic coatings—Phosphate conversion coating of metals 金属及其他无机覆盖层 金属的磷化膜 |
China National Standards Meta |
English PDF |
| GB/T 38822-2020 |
Metallic materials—Creep-fatigue test method 金属材料 蠕变-疲劳试验方法 |
China National Standards Meta |
English PDF |
| GB/T 38812.2-2020 |
Direct reduced iron—Determination of Metallic iron content—The potassium dichromate titrimetric method after decomposition of sample by ferric chloride 直接还原铁 金属铁含量的测定 三氯化铁分解重铬酸钾滴定法 |
China National Standards Meta |
English PDF |
| GB/T 38811-2020 |
Metallic materials—Residual stress—Method of sound beam control 金属材料 残余应力 声束控制法 |
China National Standards Meta |
English PDF |
| GB/T 38806-2020 |
Metallic materials—Sheet and strip—Test method for bending and folding properties 金属材料 薄板和薄带 弯折性能试验方法 |
China National Standards Meta |
English PDF |
| GB/T 38804-2020 |
Test method for oxidation of Metallic materials exposed in high-temperature steam 金属材料高温蒸汽氧化试验方法 |
China National Standards Meta |
English PDF |
| GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards Meta |
English PDF |
| GB/T 4461-2020 |
Thermostat Metal strip 热双金属带材 |
China National Standards Meta |
English PDF |
| GB/T 244-2020 |
Metallic material—Tube—Bend test method 金属材料 管 弯曲试验方法 |
China National Standards Meta |
English PDF |
| GB/T 20671.1-2020 |
Classification system and test methods for nonMetallic gasket materials—Part 1：Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分:非金属垫片材料分类体系 |
China National Standards Meta |
English PDF |
| GB/T 38769-2020 |
Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces 金属材料 预裂纹夏比试样冲击加载断裂韧性的测定 |
China National Standards Meta |
English PDF |
| GB/T 38758-2020 |
Pneumatic fluid power—Rules of non-ferrous Metallic cylinder body 气动 有色金属缸筒技术要求 |
China National Standards Meta |
English PDF |
| GB/T 4334-2020 |
Corrosion of Metals and alloys－Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels 金属和合金的腐蚀 奥氏体及铁素体-奥氏体（双相）不锈钢晶间腐蚀试验方法 |
China National Standards Meta |
English PDF |
| GB/T 38596-2020 |
Determination method of heavy Metal contents in the wastewater during catalyst production 催化剂生产废水中重金属含量的测定 |
China National Standards Meta |
English PDF |
| GB/T 4156-2020 |
Metallic materials—Sheet and strip—Erichsen cupping test 金属材料 薄板和薄带 埃里克森杯突试验 |
China National Standards Meta |
English PDF |
| GB/T 38719-2020 |
Metallic materials—Tube—Determination of biaxial stress-strain curve of tube by hydro-bulging test 金属材料 管 测定双轴应力-应变曲线的液压胀形试验方法 |
China National Standards Meta |
English PDF |
| GB/T 38684-2020 |
Metallic materials—Sheet and strip—Biaxial stress-strain curve by means of bulge test—Optical measuring systems 金属材料 薄板和薄带 双轴应力-应变曲线胀形试验 光学测量方法 |
China National Standards Meta |
English PDF |
| GB/T 38658-2020 |
Guidance for the extension of validity of type tests of AC Metal enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV 3.6 kV～40.5 kV交流金属封闭开关设备和控制设备型式试验有效性的延伸导则 |
China National Standards Meta |
English PDF |
| GB/T 3906-2020 |
Alternating-current Metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV 3.6 kV～40.5 kV交流金属封闭开关设备和控制设备 |
China National Standards Meta |
English PDF |
| GB/T 38577-2020 |
Determination of the biological activity for plant hormone-related secondary Metabolites—Indicator plant method 植物激素类次生代谢产物的生物活性测定 指示植物法 |
China National Standards Meta |
English PDF |
| GB/T 38571-2020 |
Determination of alkaloids as plant secondary Metabolites—Liquid chromatography-mass spectrometry 植物次生代谢物生物碱的检测 液相色谱-质谱法 |
China National Standards Meta |
English PDF |
| GB/T 7964-2020 |
Sintered Metal materials(excluding hardmetal)--Tension testing at room temperature 烧结金属材料(不包括硬质合金) 室温拉伸试验 |
China National Standards Meta |
English PDF |
| GB/T 6885-2020 |
HardMetals--Sampling and testing method of mixed powders 硬质合金 混合粉取样和试验方法 |
China National Standards Meta |
English PDF |
| GB/T 38516-2020 |
Permeable sintered Metal materials—Determination of average pore size of medium flow 可渗透性烧结金属材料 中流量平均孔径的测定 |
China National Standards Meta |
English PDF |
| GB/T 38555-2020 |
Information technology—Big data—Core Metadata for industrial product 信息技术 大数据 工业产品核心元数据 |
China National Standards Meta |
English PDF |
| GB/T 38548.4-2020 |
Content resources digitization—Part 4:Metadata 内容资源数字化加工 第4部分：元数据 |
China National Standards Meta |
English PDF |
| GB/T 38498-2020 |
Evaluation method for determining Metal corrosion of disinfectant 消毒剂金属腐蚀性评价方法 |
China National Standards Meta |
English PDF |
| GB/T 4702.18-2020 |
Chromiun Metal—Determination of vanadium content—Tantalum reagent trichloromethane extraction spectrophtometry method 金属铬 钒含量的测定 钽试剂三氯甲烷萃取分光光度法 |
China National Standards Meta |
English PDF |
| GB 51414-2020 |
Standard for water saving design in non-ferrous Metals enterprises 有色金属企业节水设计标准 |
China National Standards Meta |
English PDF |
| GB/T 51413-2020 |
Standard for design of waste heat utilization in non-ferrous Metal industry 有色金属工业余热利用设计标准 |
China National Standards Meta |
English PDF |
| GB 51411-2020 |
Standard for design of Metal mine land reclamation engineering 金属矿山土地复垦工程设计标准 |
China National Standards Meta |
English PDF |
| GB 1886.4-2020 |
National food safety standard - Food additive - Sodium hexaMetaphosphate 食品安全国家标准 食品添加剂 六偏磷酸钠 |
China National Standards Meta |
English PDF |
| GB/T 39670-2020 |
Determination of nitrofuran Metabolites in pet feeds—Liquid chromatography–tandem mass spectrometry 宠物饲料中硝基呋喃类代谢物残留量的测定 液相色谱-串联质谱法 |
China National Standards Meta |
English PDF |
| GB/T 39637-2020 |
Corrosion of Metals and alloys—Classification of soil corrosivity 金属和合金的腐蚀 土壤环境腐蚀性分类 |
China National Standards Meta |
English PDF |
| GB/T 39635-2020 |
Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test 金属材料 仪器化压入法测定压痕拉伸性能和残余应力 |
China National Standards Meta |
English PDF |
| GB/T 39560.701-2020 |
Determination of certain substances in electrical and electronic products—Part 7-1:Hexavalent chromium—Presence of hexavalent chromium [Cr(VI)] in colourless and coloured corrosion-protected coatings on Metals by the colorimetric method 电子电气产品中某些物质的测定 第7-1部分：六价铬 比色法测定金属上无色和有色防腐镀层中的六价铬[Cr(VI)] |
China National Standards Meta |
English PDF |
| GB/T 21838.4-2020 |
Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards Meta |
English PDF |
| GB/T 11032-2020 |
Metal-oxide surge arresters without gaps for a.c. systems 交流无间隙金属氧化物避雷器 |
China National Standards Meta |
English PDF |
| GB/T 2976-2020 |
Metallic materials—Wire—Wrapping test 金属材料 线材 缠绕试验方法 |
China National Standards Meta |
English PDF |
| GB/T 39608-2020 |
Metadata for digital products of fundamental geographic information 基础地理信息数字成果元数据 |
China National Standards Meta |
English PDF |
| GB/T 14849.3-2020 |
Methods for chemical analysis of silicon Metal--Part 3: Determination of calcium content 工业硅化学分析方法 第3部分：钙含量的测定 |
China National Standards Meta |
English PDF |
| GB/T 14849.1-2020 |
Methods for chemical analysis of silicon Metal--Part 1: Determination of iron content 工业硅化学分析方法 第1部分：铁含量的测定 |
China National Standards Meta |
English PDF |
| GB/T 39320-2020 |
Electronic business—Meta model—Foundation module 电子商务 元模型 基本模块 |
China National Standards Meta |
English PDF |
| GB/T 39316.6-2020 |
General resource of military and civilian—Meta Data—Part 6: Facilities 军民通用资源 元数据 第6部分：设施类 |
China National Standards Meta |
English PDF |
| GB/T 39316.5-2020 |
General resource of military and civilian—Meta Data—Part 5:Personnel 军民通用资源 元数据 第5部分：人员类 |
China National Standards Meta |
English PDF |
| GB/T 39316.3-2020 |
General resource of military and civilian—Meta data—Part 3: Equipment—Aviation repair parts 军民通用资源 元数据 第3部分：器材类 航材 |
China National Standards Meta |
English PDF |
| GB/T 39316.2-2020 |
General resource of military and civilian—Meta data—Part 2 : Device—Civil transport ship 军民通用资源 元数据 第2部分：设备类 民用运输船舶 |
China National Standards Meta |
English PDF |
| GB/T 39316.1-2020 |
General resource of military and civilian—Meta data—Part 1: Supplies—Petroleum products 军民通用资源 元数据 第1部分：物资类 油品 |
China National Standards Meta |
English PDF |
| GB/T 39254-2020 |
Additive manufacturing—Evaluation guideline for mechanical properties of Metal parts 增材制造 金属制件机械性能评价通则 |
China National Standards Meta |
English PDF |
| GB/T 39253-2020 |
Additive manufacturing—Specification for directed energy deposition of Metal materials 增材制造 金属材料定向能量沉积工艺规范 |
China National Standards Meta |
English PDF |
| GB/T 39252-2020 |
Additive manufacturing—Specification for powder bed fusion process of Metal materials 增材制造 金属材料粉末床熔融工艺规范 |
China National Standards Meta |
English PDF |
| GB/T 39251-2020 |
Additive manufacturing—Methods to characterize performance of Metal powders 增材制造 金属粉末性能表征方法 |
China National Standards Meta |
English PDF |
| GB/T 39247-2020 |
Additive manufacturing—Specification for heat treatment process of Metal parts 增材制造 金属制件热处理工艺规范 |
China National Standards Meta |
English PDF |
| GB/T 39245.2-2020 |
Grooved Metal gaskets with covering layers for pipe flanges—Part 2：Class designated 管法兰用金属齿形组合垫片 第2部分：Class 系列 |
China National Standards Meta |
English PDF |
| GB/T 39245.1-2020 |
Grooved Metal gaskets with covering layers for pipe flanges—Part 1：PN designated 管法兰用金属齿形组合垫片 第1部分：PN 系列 |
China National Standards Meta |
English PDF |
| GB/T 24523-2020 |
Metallic materials—Test method for rapid indentation (Brinell type) hardness testing 金属材料 快速压入（布氏型）硬度试验方法 |
China National Standards Meta |
English PDF |
| GB/T 19066.2-2020 |
Composite wave-serrated Metal gaskets for pipe flanges一Part 2:Class designated 管法兰用金属波齿复合垫片 第2部分：Class系列 |
China National Standards Meta |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
