Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 39994-2021 |
Determination of six metal elements (iron, calcium, magnesium, zinc, titanium,copper) in POLYolefin pipe system 聚烯烃管道中六种金属元素（铁、钙、镁、锌、钛、铜）的测定 |
China National Standards POLY |
 English PDF |
| GB/T 24596-2021 |
Ductile iron pipes and fittings—POLYurethane coatings 球墨铸铁管和管件 聚氨酯涂层 |
China National Standards POLY |
English PDF |
| GB/T 20218-2021 |
Biaxially oriented POLYamide (nylon) film 双向拉伸聚酰胺（尼龙）薄膜 |
China National Standards POLY |
English PDF |
| GB/T 39748.9-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing POLYmer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分：称重法测定密度 |
China National Standards POLY |
English PDF |
| GB/T 39748.8-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing POLYmer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 |
China National Standards POLY |
English PDF |
| GB/T 39748.7-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing POLYmer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 |
China National Standards POLY |
English PDF |
| GB/T 39748.6-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing POLYmer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 |
China National Standards POLY |
English PDF |
| GB/T 39748.11-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing POLYmer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分：可吸入颗粒含量的测定 |
China National Standards POLY |
English PDF |
| GB/T 39748.10-2021 |
Urine-absorbing aids for incontinence -- Test methods for characterizing POLYmer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分：电位滴定法测定可萃取聚合物量 |
China National Standards POLY |
English PDF |
| GB/T 39937-2021 |
Plastics—Extruded sheets of POLYpropylene (PP)—Requirements and test methods 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法 |
China National Standards POLY |
English PDF |
| GB/T 39936-2021 |
Plastics—Extruded sheets of POLYpropylene (PP)—Requirements and test methods 深冷保冷用泡沫塑料 |
China National Standards POLY |
English PDF |
| GB/T 39827.2-2021 |
Plastics -- Post-consumer POLY(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards POLY |
English PDF |
| GB/T 39827.1-2021 |
Plastics -- Post-consumer POLY(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第1部分：命名系统和分类基础 |
China National Standards POLY |
English PDF |
| GB/T 41071-2021 |
Determination of POLYcyclic aromatic hydrocarbons in dye products 染料产品中多环芳烃的测定 |
China National Standards POLY |
English PDF |
| GB/T 15592-2021 |
POLYvinyl chloride paste resins 聚氯乙烯糊用树脂 |
China National Standards POLY |
English PDF |
| GB/T 41003.2-2021 |
General technical specification for plastic foam mats—Part 2: Indoor POLYvinyl chloride foam mats 塑料泡沫垫通用技术条件 第2部分：室内聚氯乙烯泡沫垫 |
China National Standards POLY |
English PDF |
| GB/T 38482-2021 |
Determination of animal type Ⅰ collagen—POLYacrylamide gel electrophoresis 动物源性I型胶原蛋白成分测定 聚丙烯酰胺凝胶电泳法 |
China National Standards POLY |
English PDF |
| GB/T 7363-2021 |
Test method for POLYnuclear aromatics in petroleum wax 石油蜡中稠环芳烃试验法 |
China National Standards POLY |
English PDF |
| GB/T 41003.1-2021 |
General technical specification for plastic foam mats—Part 1:POLYethylene/ethylene vinylacetate copolymer foam mats for children 塑料泡沫垫通用技术条件 第1部分：聚乙烯/乙烯-醋酸乙烯酯共聚物儿童泡沫垫 |
China National Standards POLY |
English PDF |
| GB/T 41006-2021 |
General technical requirements for POLYurethane synthetic leather used for vehicle 汽车用聚氨酯合成革通用技术条件 |
China National Standards POLY |
English PDF |
| GB/T 41167-2021 |
General requirements for POLYethylene terephthalate(PET) bottle for drinks 聚对苯二甲酸乙二醇酯(PET)饮品瓶通用技术要求 |
China National Standards POLY |
English PDF |
| GB/T 24282-2021 |
Plastics—Determination of xylene-soluble matter fraction in POLYpropylene 塑料 聚丙烯中二甲苯可溶物含量的测定 |
China National Standards POLY |
English PDF |
| GB/T 41171-2021 |
Urine-absorbing aids for incontinence -- Measurement of airborne respirable POLYacrylate superabsorbent materials -- Determination of dust in collection cassettes by sodium atomic absorption spectrometry 失禁用尿吸收辅助器具? 空气中可吸入聚丙烯酸高吸水性材料测量 钠原子吸收光谱法对采集盒粉尘的测定 |
China National Standards POLY |
English PDF |
| GB/T 40911.3-2021 |
Plastics—POLY(methyl methacrylate) sheets—Types,dimensions and characteristics—Part 3:Continuous cast sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第3部分：连续浇铸板材 |
China National Standards POLY |
English PDF |
| GB/T 40911.2-2021 |
Plastics—POLY(methyl methacrylate)sheets—Types,dimensions and characteristics—Part 2:Extruded sheets 塑料制品 聚甲基丙烯酸甲酯板材 类型、尺寸和特性 第2部分：挤出板材 |
China National Standards POLY |
English PDF |
| GB/T 40967-2021 |
POLYethylene(PE)pipes and fittings for nuclear power plants 核电厂用聚乙烯（PE）管材及管件 |
China National Standards POLY |
English PDF |
| GB/T 40919-2021 |
POLYethylene materials for piping systems—Determination of Strain Hardening Modulus in relation to slow crack growth 管道系统用聚乙烯材料 与慢速裂纹增长相关的应变硬化模量的测定 |
China National Standards POLY |
English PDF |
| GB/T 40921-2021 |
Expanded POLYpropylene (PP-E) beads 发泡聚丙烯（PP-E）珠粒 |
China National Standards POLY |
English PDF |
| GB/T 40918-2021 |
General technical requirements of POLYstyrene wood-imitation plastic board for outdoor application 聚苯乙烯户外仿木板材通用技术要求 |
China National Standards POLY |
English PDF |
| GB/T 40968-2021 |
Test method of POLYcylic aromatic hydrocarbons in musical instrument 乐器产品中多环芳烃的测试方法 |
China National Standards POLY |
English PDF |
| GB/T 40916-2021 |
High strength POLYurethane foam for storage and transport of liquefied gas 液化气储运用高强度聚氨酯泡沫塑料 |
China National Standards POLY |
English PDF |
| GB/T 41000-2021 |
General requirement of POLYcarbonate (PC) drinking water pitcher 聚碳酸酯（PC）饮水罐质量通则 |
China National Standards POLY |
English PDF |
| GB/T 40006.9-2021 |
Plastics—Recycled plastics—Part 9:POLY(ethylene terephthalate) (PET) materials 塑料 再生塑料 第9部分：聚对苯二甲酸乙二醇酯(PET)材料 |
China National Standards POLY |
English PDF |
| GB/T 40006.8-2021 |
Plastics—Recycled plastics—Part 8: POLYamide (PA) materials 塑料 再生塑料 第8部分：聚酰胺(PA)材料 |
China National Standards POLY |
English PDF |
| GB/T 40006.7-2021 |
Plastics—Recycled plastics—Part 7: POLYcarbonate(PC) materials 塑料 再生塑料 第7部分：聚碳酸酯(PC)材料 |
China National Standards POLY |
English PDF |
| GB/T 40006.6-2021 |
Plastics—Recycled plastics—Part 6: POLYstyrene（PS）and impact-resistant polystyrene(PS-I) materials 塑料 再生塑料 第6部分：聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）材料 |
China National Standards POLY |
English PDF |
| GB/T 29614-2021 |
Vulcanized rubber—Determination the content of POLYcyclic aromatic hydrocarbons 硫化橡胶 多环芳烃含量的测定 |
China National Standards POLY |
English PDF |
| GB/T 40632-2021 |
The determination for POLYsaccharides in bamboo leaves 竹叶中多糖的检测方法 |
China National Standards POLY |
English PDF |
| GB/T 40971-2021 |
Methods for the determination of prohibited substance in furniture products and related materials—POLYcyclic aromatic hydrocarbons 家具产品及其材料中禁限用物质测定方法 多环芳烃 |
China National Standards POLY |
English PDF |
| GB/T 40872-2021 |
Plastics—Test methods of POLYethylene cellular 塑料 聚乙烯泡沫试验方法 |
China National Standards POLY |
English PDF |
| GB/T 40722.2-2021 |
Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-POLYmerized SBR -- Part 2: FTIR with ATR method 苯乙烯-丁二烯橡胶（SBR）? 溶液聚合SBR微观结构的测定? 第2部分：红外光谱ATR 法 |
China National Standards POLY |
English PDF |
| GB/T 39560.8-2021 |
Determination of certain substances in electrical and electronic products—Part 8:Phthalates in POLYmers by gas chromatography-mass spectrometry (GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermaldesorption accessory (Py/TD-GC-MS) 电子电气产品中某些物质的测定 第8部分：气相色谱-质谱法（GC-MS）与配有热裂解/热脱附的气相色谱-质谱法 （Py/TD-GC-MS）测定聚合物中的邻苯二甲酸酯 |
China National Standards POLY |
English PDF |
| GB/T 39560.702-2021 |
Determination of certain substances in electrical and electronic products—Part 7-2:Hexavalent chrome—Determination of hexavalent chrome[Cr(VI)]in POLYmers and electronics by the colormetric method 电子电气产品中某些物质的测定 第7-2部分：六价铬 比色法测定聚合物和电子件中的六价铬[Cr（VI）] |
China National Standards POLY |
English PDF |
| GB/T 39560.5-2021 |
Determination of certain substances in electrical and electronic products—Part 5: Cadmium，lead and chromium in POLYmers and electronics and cadmium and lead in metals by AAS，AFS，ICP-OES and ICP-MS 电子电气产品中某些物质的测定 第5部分： AAS、AFS、ICP-OES和ICP-MS法测定聚合物和电子件中镉、铅、铬以及金属中镉、铅的含量 |
China National Standards POLY |
English PDF |
| GB/T 39560.4-2021 |
Determination of certain substances in electrical and electronic products—Part 4: Mercury in POLYmers, metals and electronics by CV-AAS, CV-AFS , ICP-OES and ICP-MS 电子电气产品中某些物质的测定 第4部分：CV-AAS、CV-AFS、ICP-OES和ICP-MS测定聚合物、金属和电子件中的汞 |
China National Standards POLY |
English PDF |
| GB/T 1232.3-2021 |
Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 3:Determination of the Delta Mooney value for non-pigmented,oil-extended emulsion-POLYmerized SBR 未硫化橡胶 用圆盘剪切黏度计进行测定 第3部分：无填料的充油乳液聚合型苯乙烯-丁二烯橡胶Delta门尼值的测定 |
China National Standards POLY |
English PDF |
| GB/T 40912-2021 |
Textiles—Quantitative chemical analysis—Mixtures of POLYesteramide with certain other fibers 纺织品 定量化学分析 聚酰胺酯纤维与某些其他纤维的混合物 |
China National Standards POLY |
English PDF |
| GB/T 40566-2021 |
Granular POLYsilicon produced by fluidized bed method—Determination of hydrogen—Pulse heating inert gas fusion infrared absorption method 流化床法颗粒硅 氢含量的测定 脉冲加热惰性气体熔融红外吸收法 |
China National Standards POLY |
English PDF |
| GB/T 6346.24-2021 |
Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive POLYmer solid electrolyte 电子设备用固定电容器 第24部分：分规范 表面安装导电聚合物固体电解质钽固定电容器 |
China National Standards POLY |
English PDF |
| GB/T 40641-2021 |
Determination of POLYprenol from pine needles—High performance liquid chromatography 松针聚戊烯醇含量的测定 高效液相色谱法 |
China National Standards POLY |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- POLYoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards POLY |
English PDF |
| GB/T 22271.1-2021 |
Plastics -- POLYoxymethylene(POM) moulding and extrusion materials -- Part 1: Designation system and basis for specification 塑料 聚甲醛（POM）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards POLY |
English PDF |
| GB/T 39506-2020 |
Determination of the POLY vinyl chloride (PVC) content of unplasticized poly vinyl chloride (PVC-U) pipes and fittings—Method based on total chlorine content 硬聚氯乙烯（PVC-U）管材及管件中聚氯乙烯（PVC）含量的测定 基于总氯含量的方法 |
China National Standards POLY |
English PDF |
| GB/T 39199-2020 |
Characterization and testing methods of recycled POLYethylene (PE) 聚乙烯（PE）塑料再生料的表征特性及检测方法 |
China National Standards POLY |
English PDF |
| GB/T 39100-2020 |
Determination of antioxidant activity for POLYpeptides—DPPH and ABTS methods 多肽抗氧化性测定 DPPH和ABTS法 |
China National Standards POLY |
English PDF |
| GB/T 39101-2020 |
Determination of antimicrobial activity for POLYpeptides—Inhibition zone method 多肽抗菌性测定 抑菌圈法 |
China National Standards POLY |
English PDF |
| GB 30612-2014 |
National food safety standard - Food Additives - POLYdimethylsiloxane (PDMS) and Its Emulsion + No.1 modification sheet 食品安全国家标准 食品添加剂 聚二甲基硅氧烷及其乳液+《第1号修改单》 |
China National Standards POLY |
English PDF |
| GB 15892-2020 |
POLYaluminium chloride for treatment of drinking water 生活饮用水用聚氯化铝 |
China National Standards POLY |
English PDF |
| GB/T 24451-2020 |
Low resilience flexible POLYurethane cellular plastics 慢回弹软质聚氨酯泡沫塑料 |
China National Standards POLY |
English PDF |
| GB/T 39025-2020 |
Spun-dyed POLYimide staple fiber 有色聚酰亚胺短纤维 |
China National Standards POLY |
English PDF |
| GB/T 39026-2020 |
Test method for the identification of recycled POLYethylene terephthalate (PET) fiber 循环再利用聚酯（PET）纤维鉴别方法 |
China National Standards POLY |
English PDF |
| GB/T 39027-2020 |
High strength and modulus POLYimide filament yarns 高强高模聚酰亚胺长丝 |
China National Standards POLY |
English PDF |
| GB/T 22875-2018 |
Super-absorbent POLYmer for sanitary towel and diapers 纸尿裤和卫生巾用高吸收性树脂+第1号修改单 |
China National Standards POLY |
English PDF |
| GB/T 25997-2020 |
POLYisocyanurate（PIR） products for thermal insulation 绝热用聚异氰脲酸酯制品 |
China National Standards POLY |
English PDF |
| GB/T 12967.1-2020 |
Test methods for anodic oxidation coatings and organic POLYmer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分：耐磨性的测定 |
China National Standards POLY |
English PDF |
| GB/T 38907-2020 |
Water saving enterprises—POLYsilicon industry 节水型企业 多晶硅行业 |
China National Standards POLY |
English PDF |
| GB/Z 38765-2020 |
Targeted poverty alleviation—Chinese medicinal materials—Specifications for operation management of Paris POLYphylla Smith var.yunnanensis(Franch.)Hand.-Mazz.project 精准扶贫 中药材 滇重楼产业项目运营管理规范 |
China National Standards POLY |
English PDF |
| GB/T 18916.50-2020 |
Norm of water intake—Part 50：POLYester product 取水定额 第50部分：聚酯涤纶产品 |
China National Standards POLY |
English PDF |
| GB/T 18916.49-2020 |
Norm of water intake—Part 49：POLYamide product 取水定额 第49部分：锦纶产品 |
China National Standards POLY |
English PDF |
| GB/T 18916.48-2020 |
Norm of water intake—Part 48：POLYvinyl product 取水定额 第48部分：维纶产品 |
China National Standards POLY |
English PDF |
| GB/T 18916.47-2020 |
Norm of water intake—Part 47: POLYsilicon production 取水定额 第47部分：多晶硅生产 |
China National Standards POLY |
English PDF |
| GB/T 38534-2020 |
Test method for tensile properties of oriented fibre reinforced POLYmer matrix composite materials at ultra-low temperature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 |
China National Standards POLY |
English PDF |
| GB/T 39714.2-2020 |
Plastics—POLYtetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 |
China National Standards POLY |
English PDF |
| GB/T 39714.1-2020 |
Plastics—POLYtetrafluoroethylene(PTFE) semi-finished products—Part 1:Requirements and designation 塑料 聚四氟乙烯(PTFE)半成品 第1部分：要求和命名 |
China National Standards POLY |
English PDF |
| GB/T 39690.2-2020 |
Plastics—Mixtures of POLYpropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 |
China National Standards POLY |
English PDF |
| GB/T 39690.1-2020 |
Plastics—Mixtures of POLYpropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 1: Designation system and basis for specification 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第1部分： 命名系统和分类基础 |
China National Standards POLY |
English PDF |
| GB/T 39560.6-2020 |
Determination of certain substances in electrical and electronic products—Part 6: POLYbrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry（GC-MS） 电子电气产品中某些物质的测定 第6部分：气相色谱-质谱仪（GC-MS）测定聚合物中的多溴联苯和多溴二苯醚 |
China National Standards POLY |
English PDF |
| GB/T 1632.4-2020 |
Plastics—Determination of the viscosity of POLYmers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 |
China National Standards POLY |
English PDF |
| GB/T 39710-2020 |
POLYcarbonate / acrylonitrile-butadiene-styrene (PC / ABS) material for charging spot housing of electric vehicle 电动汽车充电桩壳体用聚碳酸酯/丙烯腈-丁二烯-苯乙烯（PC/ABS）专用料 |
China National Standards POLY |
English PDF |
| GB/T 39699-2020 |
Rubber—Identification of POLYmers—Pyrolytic gas-chromatographic method using mass-spectrometric detection 橡胶 聚合物的鉴定 裂解气相色谱-质谱法 |
China National Standards POLY |
English PDF |
| GB/T 28799.5-2020 |
POLYethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 5： Fitness for purpose of the system 冷热水用耐热聚乙烯(PE-RT)管道系统 第5部分：系统适用性 |
China National Standards POLY |
English PDF |
| GB/T 28799.3-2020 |
POLYethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 3: Fittings 冷热水用耐热聚乙烯(PE-RT)管道系统 第3部分：管件 |
China National Standards POLY |
English PDF |
| GB/T 28799.2-2020 |
POLYethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 2: Pipes 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分：管材 |
China National Standards POLY |
English PDF |
| GB/T 28799.1-2020 |
POLYethylene of raised temperature resistance（PE-RT）piping systems for hot and cold water installations—Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分：总则 |
China National Standards POLY |
English PDF |
| GB/T 20674.4-2020 |
Plastics pipes and fittings—Equipment for fusion jointing POLYethylene systems—Part 4: Traceability coding 塑料管材和管件 聚乙烯系统熔接设备 第4部分：可追溯编码 |
China National Standards POLY |
English PDF |
| GB/T 20674.3-2020 |
Plastics pipes and fittings—Equipment for fusion jointing POLYethylene systems—Part 3:Operator's badge 塑料管材和管件 聚乙烯系统熔接设备 第3部分：操作者代码 |
China National Standards POLY |
English PDF |
| GB/T 20674.2-2020 |
Plastics pipes and fittings—Equipment for fusion jointing POLYethylene systems—Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 |
China National Standards POLY |
English PDF |
| GB/T 20674.1-2020 |
Plastics pipes and fittings—Equipment for fusion jointing POLYethylene systems—Part 1:Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 |
China National Standards POLY |
English PDF |
| GB/T 19473.5-2020 |
POLYbutene (PB) piping systems for hot and cold water installations—Part 5: Fitness for purpose of the system 冷热水用聚丁烯（PB）管道系统 第5部分：系统适用性 |
China National Standards POLY |
English PDF |
| GB/T 19473.3-2020 |
POLYbutene (PB) piping systems for hot and cold water installations—Part 3: Fittings 冷热水用聚丁烯（PB）管道系统 第3部分：管件 |
China National Standards POLY |
English PDF |
| GB/T 19473.2-2020 |
POLYbutene (PB) piping systems for hot and cold water installations—Part 2: Pipes 冷热水用聚丁烯（PB）管道系统 第2部分：管材 |
China National Standards POLY |
English PDF |
| GB/T 19473.1-2020 |
POLYbutene (PB) piping systems for hot and cold water installations—Part 1: General 冷热水用聚丁烯（PB）管道系统 第1部分：总则 |
China National Standards POLY |
English PDF |
| GB/T 18993.5-2020 |
Chlorinated POLY (vinyl chloride) （PVC-C）piping systems for hot and cold water installations—Part 5：Fitness for the purpose of system 冷热水用氯化聚氯乙烯（PVC-C）管道系统 第5部分：系统适用性 |
China National Standards POLY |
English PDF |
| GB/T 18993.3-2020 |
Chlorinated POLY (vinyl chloride) (PVC-C) piping systems for hot and cold water installations—Part 3：Fittings 冷热水用氯化聚氯乙烯（PVC-C）管道系统 第3部分：管件 |
China National Standards POLY |
English PDF |
| GB/T 18993.2-2020 |
Chlorinated POLY (vinyl chloride) (PVC-C) piping systems for hot and cold water installations—Part 2：Pipes 冷热水用氯化聚氯乙烯（PVC-C）管道系统 第2部分：管材 |
China National Standards POLY |
English PDF |
| GB/T 18993.1-2020 |
Chlorinated POLY (vinyl chloride) (PVC-C) piping systems for hot and cold water installations—Part 1：General 冷热水用氯化聚氯乙烯（PVC-C）管道系统 第1部分：总则 |
China National Standards POLY |
English PDF |
| GB/T 39246-2020 |
Prefabricated directly buried insulating fittings with seamless high density POLYethylene casing pipe 高密度聚乙烯无缝外护管预制直埋保温管件 |
China National Standards POLY |
English PDF |
| GB/T 35465.6-2020 |
Test method for fatigue properties of POLYmer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension 聚合物基复合材料疲劳性能测试方法 第6部分：胶粘剂拉伸剪切疲劳 |
China National Standards POLY |
English PDF |
| GB/T 35465.5-2020 |
Test method for fatigue properties of POLYmer matrix composite materials—Part 5: Flexural fatigue 聚合物基复合材料疲劳性能测试方法 第5部分：弯曲疲劳 |
China National Standards POLY |
English PDF |
| GB/T 35465.4-2020 |
Test method for fatigue properties of POLYmer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue 聚合物基复合材料疲劳性能测试方法 第4部分：拉-压和压-压疲劳 |
China National Standards POLY |
English PDF |
| GB/T 24165-2020 |
Determination of POLYchlorinated biphenyls in dye products 染料产品中多氯联苯的测定 |
China National Standards POLY |
English PDF |
| GB/T 15593-2020 |
Plasticized POLY(vinyl chloride) compounds for transfusion (infusion) equipment 输血(液)器具用聚氯乙烯塑料 |
China National Standards POLY |
English PDF |
| GB/T 3780.28-2020 |
Carbon black—Part 28: Determination the content of POLYcyclic aromatic hydrocarbons 炭黑 第28部分：多环芳烃含量的测定 |
China National Standards POLY |
English PDF |
| GB/T 20202-2019 |
Ethylene-vinyl acetate coPOLYmer (EVA) blown covering film for agriculture 农业用乙烯-乙酸乙烯酯共聚物（EVA）吹塑棚膜 |
China National Standards POLY |
English PDF |
| GB/T 50639-2019 |
Standard for design of POLYamide polymer and fiber plant 锦纶工厂设计标准 |
China National Standards POLY |
English PDF |
| GB/T 50508-2019 |
Standard for design of POLYester fiber plant 涤纶工厂设计标准 |
China National Standards POLY |
English PDF |
| GB/T 38288-2019 |
Plastics—Recycled POLYpropylene compound 塑料 聚丙烯再生改性专用料 |
China National Standards POLY |
English PDF |
| GB/T 38286-2019 |
POLYethylene(PE)，polypropylene(PP) and polystyrene(PS) resin―Determination of peroxide value 聚乙烯、聚丙烯、聚苯乙烯树脂 过氧化值的测定 |
China National Standards POLY |
English PDF |
| GB/T 38273.2-2019 |
Plastics—Thermoplastic POLYester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
China National Standards POLY |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic POLYester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
China National Standards POLY |
English PDF |
| GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in POLYstyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 |
China National Standards POLY |
English PDF |
| GB/T 22079-2019 |
HV POLYmeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则 |
China National Standards POLY |
English PDF |
| GB/T 4455-2019 |
POLYethylene blown covering film for agriculture 农业用聚乙烯吹塑棚膜 |
China National Standards POLY |
English PDF |
| GB/T 38421-2019 |
Fur—Detection of animal derived material—Qualitative real-time POLYmerase chain reaction (PCR) methods 毛皮 源性成分检测 实时荧光定性聚合酶链式反应（PCR）检测方法 |
China National Standards POLY |
English PDF |
| GB/T 38420-2019 |
Determination of bisphenol A migration in POLYcarbonate and polysulfone materials in toys—High performance liquid chromatography-tandem mass spectrometry 玩具聚碳酸酯和聚砜材料中双酚A迁移量的测定 高效液相色谱-串联质谱法 |
China National Standards POLY |
English PDF |
| GB/T 12009.5-2016 |
(Plastics - Aromatic isocyanates for the production of POLYurethane - Part 5: Determination of acidity - amendment No. 1) 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定《第1号修改单》 |
China National Standards POLY |
English PDF |
| GB/T 38288-2019 |
Plastics—Recycled POLYpropylene compound 塑料 聚丙烯再生改性专用料 |
China National Standards POLY |
English PDF |
| GB/T 38286-2019 |
POLYethylene(PE)，polypropylene(PP) and polystyrene(PS) resin―Determination of peroxide value 聚乙烯、聚丙烯、聚苯乙烯树脂 过氧化值的测定 |
China National Standards POLY |
English PDF |
| GB/T 38273.1-2019 |
Plastics—Thermoplastic POLYester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第1部分：命名系统和分类基础 |
China National Standards POLY |
English PDF |
| GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in POLYstyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 |
China National Standards POLY |
English PDF |
| GB/T 22079-2019 |
HV POLYmeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则 |
China National Standards POLY |
English PDF |
| GB/T 4455-2019 |
POLYethylene blown covering film for agriculture 农业用聚乙烯吹塑棚膜 |
China National Standards POLY |
English PDF |
| GB/T 37891.5-2019 |
Cutter arbors with parallel key and tenon drive—Part 5:Dimensions and designation of tool holders with POLYgonal taper interface with flange contact surface 带平键和端键传动的铣刀杆 第5部分：带法兰接触面的多棱锥柄刀杆的尺寸和标记 |
China National Standards POLY |
English PDF |
| GB/T 37881-2019 |
Plastics－Long glass fiber reinforced POLYpropylene（PP） compound for automotive 塑料 汽车用长玻璃纤维增强聚丙烯(PP)专用料 |
China National Standards POLY |
English PDF |
| GB/T 37857-2019 |
Thermoforming disposable urine cup made by POLYlactic acid 聚乳酸热成型一次性验尿杯 |
China National Standards POLY |
English PDF |
| GB/T 37836-2019 |
Air filter plate made by POLYlactic acid/polybutylene succinate composite 聚乳酸/聚丁二酸丁二酯复合材料空气过滤板 |
China National Standards POLY |
English PDF |
| GB/T 20202-2019 |
Ethylene-vinyl acetate coPOLYmer (EVA) blown covering film for agriculture 农业用乙烯-乙酸乙烯酯共聚物（EVA）吹塑棚膜 |
China National Standards POLY |
English PDF |
| GB/T 19472.1-2019 |
POLYethylene structure wall pipeline system for underground usage—Part 1: Polyethylene double wall corrugated pipes 埋地用聚乙烯（PE）结构壁管道系统 第1部分：聚乙烯双壁波纹管材 |
China National Standards POLY |
English PDF |
| GB/T 18477.3-2019 |
Unplasticized POLYvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and drainage—Part 3: Axial hollow-wall construction pipes 埋地排水用硬聚氯乙烯（PVC-U）结构壁管道系统 第3部分：轴向中空壁管材 |
China National Standards POLY |
English PDF |
| GB/T 18476-2019 |
POLYolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test) 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验） |
China National Standards POLY |
English PDF |
| GB/T 18251-2019 |
Method for the assessment of the degree of pigment or carbon black dispersion in POLYolefin pipes, fittings and compounds 聚烯烃管材、管件和混配料中颜料或炭黑分散度的测定 |
China National Standards POLY |
English PDF |
| GB/T 10067.416-2019 |
Basic specifications for electroheating and electromagnetic processing installations—Part 416: POLYsilicon ingot furnace 电热和电磁处理装置基本技术条件 第416部分:多晶硅铸锭炉 |
China National Standards POLY |
English PDF |
| GB/T 8826-2019 |
Rubber antioxidant—POLYmerized 2,2,4-trimethyl-1,2-dihydroquinoline (TMQ) 橡胶防老剂 2,2,4-三甲基-1,2-二氢化喹啉聚合物（TMQ） |
China National Standards POLY |
English PDF |
| GB/T 36520.4-2019 |
Hydraulic fluid power—Dimensions and tolerances of POLYurethane seals—Part 4：Dimensions and tolerances of seals for cylinder port 液压传动 聚氨酯密封件尺寸系列 第4部分：缸口密封圈的尺寸和公差 |
China National Standards POLY |
English PDF |
| GB/T 36520.3-2019 |
Hydraulic fluid power—Dimensions and tolerances of POLYurethane seals—Part 3：Dimensions and tolerances of wiper ring 液压传动 聚氨酯密封件尺寸系列 第3部分：防尘圈的尺寸和公差 |
China National Standards POLY |
English PDF |
| GB/T 37587-2019 |
Technical specification for corrosion resistance of buried steel bend pipe POLYethylene anti-corrosion tapes 埋地钢质弯管聚乙烯防腐带耐蚀作业技术规范 |
China National Standards POLY |
English PDF |
| GB/T 37580-2019 |
Requirements for buried POLYethylene（PE） gas pipeline corrosion control engineering life cycle 聚乙烯（PE）埋地燃气管道腐蚀控制工程全生命周期要求 |
China National Standards POLY |
English PDF |
| GB/T 37388-2019 |
Solution-POLYmerized styrene butadiene rubber（SSBR） 溶液聚合型苯乙烯-丁二烯橡胶（SSBR） |
China National Standards POLY |
English PDF |
| GB/T 37642-2019 |
POLYcaprolactone 聚己内酯（PCL) |
China National Standards POLY |
English PDF |
| GB/T 37639-2019 |
Determination of POLYbrominated biphenyls and polybrominated diphenyl ethers in plastic products—Gas chromatography and mass spectrometry 塑料制品中多溴联苯和多溴二苯醚的测定 气相色谱-质谱法 |
China National Standards POLY |
English PDF |
| GB/T 37638-2019 |
Determination of POLYbrominated biphenyls and polybrominated biphenyl ethers in plastic products—High performance liquid chromatography 塑料制品中多溴联苯和多溴二苯醚的测定 高效液相色谱法 |
China National Standards POLY |
English PDF |
| GB/T 20629.3-2019 |
Non-cellulosic papers for electrical purposes—Part 3: Unfilled aramid (aromatic POLYamide) papers 电气用非纤维素纸 第3部分：无填充聚芳酰胺纤维纸 |
China National Standards POLY |
English PDF |
| GB/T 17030-2019 |
POLYvinylidene chloride(PVDC)flat-film for food-packaging 食品包装用聚偏二氯乙烯（PVDC）片状肠衣膜 |
China National Standards POLY |
English PDF |
| GB 1886.297-2018 |
National food safety standard - Food Additives - POLYoxypropylene Glycerol Ether 食品安全国家标准-食品添加剂-聚氧丙烯甘油醚 |
China National Standards POLY |
English PDF |
| GB/T 36946-2018 |
Leather—Chemical tests—Determination of POLYcyclic aromatic hydrocarbons—Gas chromatography-mass spectrometry 皮革-化学试验-多环芳烃的测定-气相色谱-质谱法 |
China National Standards POLY |
English PDF |
| GB/T 37101-2018 |
Determination of 3,3’-dichloro-4,4’-diaminodiphenylmethane in POLYmeric materials—Gas chromatography-mass spectrography 聚合物材料中3,3-二氯-4,4-二氨基二苯基甲烷的测定-气相色谱-质谱法 |
China National Standards POLY |
English PDF |
| GB/T 36941-2018 |
Modified POLYpropylene masterbatch based on straw fiber 秸秆纤维基聚丙烯改性料 |
China National Standards POLY |
English PDF |
| GB/T 36971-2018 |
Textiles—Tests for colour fastness—Assessment of migration of textile colours into POLYvinyl chloride coatings 纺织品-色牢度试验-织物染料向聚氯乙烯涂层迁移的评定 |
China National Standards POLY |
English PDF |
| GB/T 36976-2018 |
Textiles－Quantitative chemical analysis－Mixtures of POLYimide with certain other fibers 纺织品-定量化学分析-聚酰亚胺纤维与某些其他纤维的混合物 |
China National Standards POLY |
English PDF |
| GB/T 35451.2-2018 |
POLYpropylene(PP) structure-wall piping systems for underground drainage and sewerage—Part 2: Polypropylene spirally enwound structure-wall pipes 埋地排水排污用聚丙烯(PP)结构壁管道系统-第2部分：聚丙烯缠绕结构壁管材 |
China National Standards POLY |
English PDF |
| GB/T 19812.4-2018 |
Plastic equipment for water saving irrigation—Part 4：POLYethylene (PE) flexible pipe 塑料节水灌溉器材-第4部分:-聚乙烯(PE)软管 |
China National Standards POLY |
English PDF |
| GB/T 5836.2-2018 |
Unplasticized POLY(vinyl chloride) (PVC-U) fittings for soil and waste discharge inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管件 |
China National Standards POLY |
English PDF |
| GB/T 5836.1-2018 |
Unplasticized POLY(vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings 建筑排水用硬聚氯乙烯(PVC-U)管材 |
China National Standards POLY |
English PDF |
| GB/T 10801.2-2018 |
Rigid extruded POLYstyrene foam board for thermal insulation(XPS) 绝热用挤塑聚苯乙烯泡沫塑料(XPS) |
China National Standards POLY |
English PDF |
| GB/T 36948-2018 |
Fibre ropes for offshore stantionkeeping—High modulus POLYethylene（HMPE） 海洋平台定位系泊纤维绳-高模量聚乙烯（HMPE） |
China National Standards POLY |
English PDF |
| GB/T 36965-2018 |
Test method for cross-linking degree of ethylene-vinyl acetate coPOLYmer applied in photovoltaic modules—Differential scanning calorimetry（DSC） 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 |
China National Standards POLY |
English PDF |
| GB/T 37049-2018 |
Test method for the content of metal impurity in electronic grade POLYsilicon—Inductively coupled-plasma mass spectrometry method 电子级多晶硅中基体金属杂质含量的测定-电感耦合等离子体质谱法 |
China National Standards POLY |
English PDF |
| GB/T 29848-2018 |
Ethylene-vinyl acetate coPOLYmer (EVA) film for PV module 光伏组件封装用乙烯-醋酸乙烯酯共聚物(EVA)胶膜 |
China National Standards POLY |
English PDF |
| GB 36900.3-2018 |
Cross Linked High Density POLYethene High Integrity Container for Low-and-intermediate level radioactive solid wastes 低、中水平放射性废物高完整性容器-交联高密度聚乙烯容器 |
China National Standards POLY |
English PDF |
| GB/T 34691.1-2018 |
Plastics—Thermoplastic POLYester (TP) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-热塑性聚酯（TP）模塑和挤出材料-第1部分：命名系统和分类基础 |
China National Standards POLY |
English PDF |
| GB/T 37196-2018 |
Plastics—POLYether polyols/polymeric polyols—Determination of aldehydes and ketones 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定 |
China National Standards POLY |
English PDF |
| GB/T 37199.2-2018 |
Plastics—POLYbutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards POLY |
English PDF |
| GB/T 37194.2-2018 |
Plastics—POLY(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 |
China National Standards POLY |
English PDF |
| GB/T 37194.1-2018 |
Plastics—POLY(phenylene sulfide)(PPS) moulding and extrusion materials—Part 1:Designation system and basis for specifications 塑料-聚苯硫醚(PPS)模塑和挤出材料-第1部分:命名系统和分类基础 |
China National Standards POLY |
English PDF |
| GB/T 8656-2018 |
Emulsion-and solution-POLYmerized styrene-butadiene rubber(SBR)—Evaluation procedures 乳液和溶液聚合型苯乙烯-丁二烯橡胶（SBR）-评价方法 |
China National Standards POLY |
English PDF |
| GB/T 17931-2018 |
POLY(ethylene terephthalate) (PET) resin for bottles 瓶用聚对苯二甲酸乙二酯（PET）树脂 |
China National Standards POLY |
English PDF |
| GB/T 37198-2018 |
Impact-resistant POLYstyrene（PS-I）resin 抗冲击聚苯乙烯（PS-I）树脂 |
China National Standards POLY |
English PDF |
| GB/T 37193-2018 |
Optical functional films—POLYethylene terephthalate（PET) film—Determination of extraction rate 光学功能薄膜-聚对苯二甲酸乙二醇酯（PET）薄膜-萃取率测定方法 |
China National Standards POLY |
English PDF |
| GB/T 37263-2018 |
Prefabricated directly buried insulating plastic-steel-plastic composite pipes with POLYurethane [PUR]foamed-plastics and high density polyethylene [PE]casing pipes 高密度聚乙烯外护管聚氨酯发泡预制直埋保温钢塑复合管 |
China National Standards POLY |
English PDF |
| GB/T 5761-2018 |
Suspension POLYvinyl chloride resins of general purpose 悬浮法通用型聚氯乙烯树脂 |
China National Standards POLY |
English PDF |
| GB/T 8660-2018 |
Solution POLYmerized butadiene rubber（BR)—Evaluation procedures 溶液聚合型丁二烯橡胶（BR）-评价方法 |
China National Standards POLY |
English PDF |
| GB/T 4059-2018 |
Test method for phosphorus content in POLYcrystalline silicon by zone-melting method under controlled atmosphere 硅多晶气氛区熔基磷检验方法 |
China National Standards POLY |
English PDF |
| GB 1886.298-2018 |
National Food Safety Standard - Food Additives - POLYoxypropylene Ethylene Oxide Glycerol Ether 食品安全国家标准-食品添加剂-聚氧丙烯氧化乙烯甘油醚 |
China National Standards POLY |
English PDF |
| GB/T 36214.5-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of POLYmers using size-exclusion chromatography—Part5:Method using light-scattering detection 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分：光散射法 |
China National Standards POLY |
English PDF |
| GB/T 8013.1-2018 |
Anodic oxide coatings and organic POLYmer coatings on aluminium and its alloys—Part 1: Anodic oxide coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第1部分：阳极氧化膜 |
China National Standards POLY |
English PDF |
| GB/T 36214.4-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of POLYmers using size-exclusion chromatography—Part4:High-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法 |
China National Standards POLY |
English PDF |
| GB/T 36214.2-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of POLYmers using size-exclusion chromatography—Part 2:Universal calibration method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法 |
China National Standards POLY |
English PDF |
| GB/T 36214.3-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of POLYmers using size-exclusion chromatography—Part 3:Low-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法 |
China National Standards POLY |
English PDF |
| GB/T 36214.1-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of POLYmers using size-exclusion chromatography—Part 1:General principles 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分：通则 |
China National Standards POLY |
English PDF |
| GB/T 8013.3-2018 |
Anodic oxide coatings and organic POLYmer coatings on aluminium and its alloys—Part 3: Organic polymer coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第3部分：有机聚合物涂膜 |
China National Standards POLY |
English PDF |
| GB/T 8013.2-2018 |
Anodic oxide coatings and organic POLYmer coatings on aluminium and its alloys—Part 2: Combined coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第2部分:阳极氧化复合膜 |
China National Standards POLY |
English PDF |
| GB/T 35083.2-2018 |
Plain bearings—Testing of the tribological behaviour of bearing materials—Part 2: Testing of POLYmer-based bearing materials 滑动轴承 轴承材料摩擦学特性试验 第2部分: 聚合物轴承材料试验 |
China National Standards POLY |
English PDF |
| GB/T 36262-2018 |
Fiber reinforced POLYmer composite grids for civil engineering 结构工程用纤维增强复合材料网格 |
China National Standards POLY |
English PDF |
| GB/T 23641-2018 |
Fiber reinforced unsaturated POLYester moulding compounds（SMC and BMC）for electrical purposes 电气用纤维增强不饱和聚酯模塑料（SMC/BMC） |
China National Standards POLY |
English PDF |
| GB/T 36159-2018 |
Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic POLYmer coatings on aluminium and its alloys in architectural applications 建筑用铝及铝合金表面阳极氧化膜及有机聚合物膜层、性能、检测方法的选择 |
China National Standards POLY |
English PDF |
| GB/T 18916.38-2018 |
Norm of water intake—Part 38: POLYvinyl chloride 取水定额 第38部分：聚氯乙烯 |
China National Standards POLY |
English PDF |
| GB/T 6346.26-2018 |
Fixed capacitors for use in electronic equipment—Part 26: Sectional specification—Fixed aluminium electrolytic capacitors with conductive POLYmer solid electrolyte 电子设备用固定电容器 第26部分：分规范 导电高分子固体电解质铝固定电容器 |
China National Standards POLY |
English PDF |
| GB/T 36488-2018 |
Determination of POLYcyclic aromatic hydrocarbons in coatings 涂料中多环芳烃的测定 |
China National Standards POLY |
English PDF |
| GB/T 36374.1-2018 |
Plastics-Sulfone POLYmer moulding and extrusion materials—Part1:Designation system and basis for specifications 塑料 砜聚合物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards POLY |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone POLYmer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards POLY |
English PDF |
| GB/T 8313-2018 |
Determination of total POLYphenols and catechins content in tea 茶叶中茶多酚和儿茶素类含量的检测方法 |
China National Standards POLY |
English PDF |
| GB/T 36497-2018 |
Determination of POLYchlorinated biphenyls in coatings 涂料中多氯联苯的测定 |
China National Standards POLY |
English PDF |
| GB/T 36289.1-2018 |
Insulating films of crystalline silicon photovoltaic(PV) modules—Part 1：POLYethylene terephthalate films 晶体硅太阳电池组件用绝缘薄膜 第1部分：聚酯薄膜 |
China National Standards POLY |
English PDF |
| GB/T 6346.2601-2018 |
Fixed capacitors for use in electronic equipment—Part 26-1:Blank detail specification—Fixed aluminium electrolytic capacitors with conductive POLYmer solid electrolyte—Assessment level EZ 电子设备用固定电容器 第26-1部分：空白详细规范 导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards POLY |
English PDF |
| GB/T 36363-2018 |
POLYolefin separator for lithium-ion battery 锂离子电池用聚烯烃隔膜 |
China National Standards POLY |
English PDF |
| GB/T 36520.2-2018 |
Hydraulic fluid power—Dimensions and tolerances of POLYurethane seals—Part 2：Dimensions and tolerances of seals used in hydraulic reciprocating applications for piston rod 液压传动 聚氨酯密封件尺寸系列 第2部分：活塞杆往复运动密封圈的尺寸和公差 |
China National Standards POLY |
English PDF |
| GB/T 36520.1-2018 |
Hydraulic fluid power—Dimensions and tolerances of POLYurethane seals—Part 1：Dimensions and tolerances of seals used in hydraulic reciprocating applications for piston 液压传动 聚氨酯密封件尺寸系列 第1部分：活塞往复运动密封圈的尺寸和公差 |
China National Standards POLY |
English PDF |
| GB/T 36792-2018 |
Flame retardant chemical—Brominated POLYcarbonate 阻燃化学品 溴代聚碳酸酯 |
China National Standards POLY |
English PDF |
| GB/T 36790-2018 |
Plastics—POLYamides—Accelerated conditioning of test specimens 塑料 聚酰胺 试样加速状态调节 |
China National Standards POLY |
English PDF |
| GB/T 36755-2018 |
BST DNA POLYmerase BST DNA聚合酶 |
China National Standards POLY |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
