Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 50997-2014 |
Code for engineering of cold-Rolled electrical steel strip plant 冷轧电工钢工程设计规范 |
China National Standards Rolled |
 English PDF |
| GB/T 4335-2013 |
Determination of ferrite grain size for cold Rolled low carbon steel sheets 低碳钢冷轧薄板铁素体晶粒度测定法 |
China National Standards Rolled |
English PDF |
| GB/T 30068-2013 |
Cold Rolled steel sheets and strips for appliance 家电用冷轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 13237-2013 |
Cold Rolled quality carbon structural steel sheets and strips 优质碳素结构钢冷轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 19277.2-2013 |
Determination of the ultimate aerobic biodegradability of plastic materials under contRolled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test 受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量 |
China National Standards Rolled |
English PDF |
| GB/T 29515-2013 |
Cold Rolled steel sheet for enamelling - Fish-scaling sensitivity test - Hydrogen permeation method 搪瓷用冷轧钢板 鳞爆敏感性试验 氢渗透法 |
China National Standards Rolled |
English PDF |
| GB/T 14164-2013 |
Hot Rolled wide strips for line pipe of petroleum and natural gas 石油天然气输送管用热轧宽钢带 |
China National Standards Rolled |
English PDF |
| GB/T 29468-2012 |
Cleanroom and associated contRolled environments - Guidelines of partition sandwich panel application technology 洁净室及相关受控环境 围护结构夹芯板应用技术指南 |
China National Standards Rolled |
English PDF |
| GB/T 29469-2012 |
Cleanrooms and associated contRolled environments - Evaluation of performance and rationality 洁净室及相关受控环境 性能及合理性评价 |
China National Standards Rolled |
English PDF |
| GB 21976.2-2012 |
Escape apparatus for building fire - Part 2: Automatic and repetitive rescue contRolled descent device 建筑火灾逃生避难器材 第2部分：逃生缓降器 |
China National Standards Rolled |
English PDF |
| GB/T 9945-2012 |
Hot-Rolled bulb flats 热轧球扁钢 |
China National Standards Rolled |
English PDF |
| GB/T 28906-2012 |
Hot Rolled wire rod for cold heading 冷镦钢热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 28899-2012 |
Wire rods for cold Rolled ribbed steel bars 冷轧带肋钢筋用热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 28763-2012 |
Numerically contRolled tube bending machine 数控弯管机 |
China National Standards Rolled |
English PDF |
| GB/T 11264-2012 |
Hot-Rolled light rails 热轧轻轨 |
China National Standards Rolled |
English PDF |
| GB/T 12274.1-2012 |
Quartz crystal contRolled oscillators of assessed quality - Part 1: Generic specification 有质量评定的石英晶体振荡器 第1部分：总规范 |
China National Standards Rolled |
English PDF |
| GB/T 28300-2012 |
Surface quality classes for hot-Rolled bars and rods technical delivery conditions 热轧棒材和盘条表面质量等级交货技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 28299-2012 |
Hot-Rolled flange plate for construction 结构用热轧翼板钢 |
China National Standards Rolled |
English PDF |
| GB/T 19277.1-2011 |
Determination of the ultimate aerobic biodegradability of plastic materials under contRolled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method 受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第1部分：通用方法 |
China National Standards Rolled |
English PDF |
| GB/T 27543-2011 |
Pedestrian contRolled platform trucks 手推升降平台搬运车 |
China National Standards Rolled |
English PDF |
| GB/T 26723-2011 |
Cold Rolled titanium strip coil 冷轧钛带卷 |
China National Standards Rolled |
English PDF |
| GB/T 26562-2011 |
Construction and layout of pedals of self-propelled sit-down rider-contRolled industrial trucks - Rules for the construction and layout of pedals 自行式坐驾工业车辆踏板的结构与布置 踏板的结构与布置原则 |
China National Standards Rolled |
English PDF |
| GB 26509-2011 |
Garden machinery - Pedestrian-contRolled lawnmower with a petrol（diesel）engine - Safety requirements and testing methods 园林机械 以汽（柴）油机为动力的步进式草坪割草机 安全技术要求和试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 6893-2010 |
Aluminium and aluminium alloys cold drawn (Rolled) seamless tubes 铝及铝合金拉（轧）制无缝管 |
China National Standards Rolled |
English PDF |
| GB/T 25915.8-2010 |
Cleanrooms and associated contRolled environments - Part 8: Classification of airborne molecular contamination 洁净室及相关受控环境 第8部分：空气分子污染分级 |
China National Standards Rolled |
English PDF |
| GB/T 25915.7-2010 |
Cleanrooms and associated contRolled environments - Part 7: Separative devices (clean air hoods, gloveboxes, isolators and minienvironments) 洁净室及相关受控环境 第7部分：隔离装置（洁净风罩、手套箱、隔离器、微环境） |
China National Standards Rolled |
English PDF |
| GB/T 25915.4-2010 |
Cleanrooms and associated contRolled environments - Part 4: Design, construction and start-up 洁净室及相关受控环境 第4部分：设计、建造、启动 |
China National Standards Rolled |
English PDF |
| GB/T 25915.2-2010 |
Cleanrooms and associated contRolled environments - Part 2: Specifications for testing and monitoring to prove continued compliance with GB/T 25915.1 洁净室及相关受控环境 第2部分：证明持续符合GB/T 25915.1的检测与监测技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 25916.2-2010 |
Cleanrooms and associated contRolled environments - Biocontamination control - Part 2: Evaluation and interpretation of biocontamination data 洁净室及相关受控环境 生物污染控制 第2部分：生物污染数据的评估与分析 |
China National Standards Rolled |
English PDF |
| GB/T 25916.1-2010 |
Cleanrooms and associated contRolled environments - Biocontamination control - Part1: General principles and methods 洁净室及相关受控环境 生物污染控制 第1部分：一般原理和方法 |
China National Standards Rolled |
English PDF |
| GB/T 25915.6-2010 |
Cleanrooms and associated contRolled environments - Part 6: Vocabulary 洁净室及相关受控环境 第6部分：词汇 |
China National Standards Rolled |
English PDF |
| GB/T 25915.5-2010 |
Cleanrooms and associated contRolled environments - Part 5: Operations 洁净室及相关受控环境 第5部分：运行 |
China National Standards Rolled |
English PDF |
| GB/T 25915.3-2010 |
Cleanrooms and associated contRolled environments - Part 3: Test methods 洁净室及相关受控环境 第3部分：检测方法 |
China National Standards Rolled |
English PDF |
| GB/T 25915.1-2010 |
Cleanrooms and associated contRolled environments - Part 1: Classification of air cleanliness 洁净室及相关受控环境 第1部分：空气洁净度等级 |
China National Standards Rolled |
English PDF |
| GB/T 12085.15-2010 |
Optics and optical instruments - Environmental test methods - Part 15: Combined digitally contRolled broad-band random vibration and dry heat or cold 光学和光学仪器 环境试验方法 第15部分：宽带随机振动(数字控制)与高温、低温综合试验 |
China National Standards Rolled |
English PDF |
| GB/T 26077-2010 |
Metallic materials - Fatigue testing - Axial-strain-contRolled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards Rolled |
English PDF |
| GB/T 26076-2010 |
Metal sheets and strips - Axial-force-contRolled fatigue testing method 金属薄板（带） 轴向力控制疲劳试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 14996-2010 |
Cold-Rolled heat-resisting superalloy sheets 高温合金冷轧板 |
China National Standards Rolled |
English PDF |
| GB/T 14995-2010 |
Hot-Rolled superalloy sheets 高温合金热轧板 |
China National Standards Rolled |
English PDF |
| GB/T 25874.1-2010 |
Textile machinery and accessories - Strip steel for dents of reeds - Part 1: Cold Rolled strip steel 纺织机械与附件 筘齿用钢片 第1部分：冷轧钢片 |
China National Standards Rolled |
English PDF |
| GB/T 25832-2010 |
Hot Rolled steel plates and strips for porcelain enameling 搪瓷用热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 11263-2010 |
Hot-Rolled H and cut T section steel 热轧H型钢和剖分T型钢 |
China National Standards Rolled |
English PDF |
| GB/T 25693-2010 |
Earth-moving machinery - remote - contRolled demolition robot 土方机械 遥控拆除机 |
China National Standards Rolled |
English PDF |
| GB/T 25659.2-2010 |
Simplified numerically contRolled horizontal turning machines - Part 2: Specifications 简式数控卧式车床 第2部分：技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 25659.1-2010 |
Simplified numerically contRolled horizontal turning machines - Part 1: Testing of the accuracy 简式数控卧式车床 第1部分：精度检验 |
China National Standards Rolled |
English PDF |
| GB/T 6145-2010 |
Manganin and constantan alloy wires,sheet and Rolled wires for precision electrical resistance 锰铜、康铜精密电阻合金线、片及带 |
China National Standards Rolled |
English PDF |
| GB/T 25514-2010 |
Health informatics - ContRolled health terminology - Structure and high-level indicators 健康信息学 健康受控词表 结构和高层指标 |
China National Standards Rolled |
English PDF |
| GB/T 25609-2010 |
Earth - moving machinery - Braking systems of pedestrian-contRolled machines - Performance requirements and test procedures 土方机械 步行操纵式机器的制动系统 性能要求和试验方法 |
China National Standards Rolled |
English PDF |
| GB 25326-2010 |
The norm of energy consumption per unit products of Rolled or drawn aluminium and aluminium alloy tubes，bars 铝及铝合金轧、拉制管、棒材单位产品能源消耗限额 |
China National Standards Rolled |
English PDF |
| GB/T 25053-2010 |
Continuously hot Rolled low carbon steel sheet and strip 热连轧低碳钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 25046-2010 |
High magnetic induction cold-Rolled non-oriented electrical steel strip and sheet 高磁感冷轧无取向电工钢带（片） |
China National Standards Rolled |
English PDF |
| GB/T 20887.5-2010 |
Continuously hot Rolled high strength steel sheet and strip for automobile - Part 5: Martensitic steel 汽车用高强度热连轧钢板及钢带 第5部分：马氏体钢 |
China National Standards Rolled |
English PDF |
| GB/T 20887.4-2010 |
Continuously hot Rolled high strength steel sheet and strip for automobile - Part 4: Transformation induced plasticity steel 汽车用高强度热连轧钢板及钢带 第4部分：相变诱导塑性钢 |
China National Standards Rolled |
English PDF |
| GB/T 20887.3-2010 |
Continuously hot Rolled high strength steel sheet and strip for automobile - Part 3: Dual phase steel 汽车用高强度热连轧钢板及钢带 第3部分：双相钢 |
China National Standards Rolled |
English PDF |
| GB/T 20887.2-2010 |
Continuously hot Rolled high strength steel sheet and strip for automobile － Part 2: High hole expansion steel 汽车用高强度热连轧钢板及钢带 第2部分：高扩孔钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.7-2010 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 7: Martensitic steels 汽车用高强度冷连轧钢板及钢带 第7部分：马氏体钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.6-2010 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 6: Transformation induced plasticity steel 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.5-2010 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 5: Isotropic steel 汽车用高强度冷连轧钢板及钢带 第5部分：各向同性钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.4-2010 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 4: High strength low alloy steel 汽车用高强度冷连轧钢板及钢带 第4部分：低合金高强度钢 |
China National Standards Rolled |
English PDF |
| GB/T 15391-2010 |
Dimension,shape and tolerances for cold-Rolled steel strips with a width less than 600mm 宽度小于600mm冷轧钢带的尺寸、外形及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 3639-2009 |
Seamless cold-drawn or cold-Rolled steel tubes for precision applications 冷拔或冷轧精密无缝钢管 |
China National Standards Rolled |
English PDF |
| GB/T 3279-2009 |
Hot-Rolled spring steel sheets and plates 弹簧钢热轧钢板 |
China National Standards Rolled |
English PDF |
| GB/T 24587-2009 |
Hot-Rolled wire rods for prestressing steel bars of concrete 预应力混凝土钢棒用热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 17396-2009 |
Hot-Rolled seamless steel tubes for hydraulic pillar service 液压支柱用热轧无缝钢管 |
China National Standards Rolled |
English PDF |
| GB/T 11251-2009 |
Hot-Rolled alloy structural steel plates 合金结构钢热轧厚钢板 |
China National Standards Rolled |
English PDF |
| GB/T 24473-2009 |
General technical requirements of digital-contRolled pocket spring machine 数控卷簧装袋机 技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 24472-2009 |
General technical requirements of digital-contRolled pocket spring assembling machine 数控袋装弹簧胶粘机 技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 24470-2009 |
General technical requirements of digital-contRolled mid-concave spring coiling machine 中凹形弹簧数控卷簧机 技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 24238-2009 |
Hot Rolled wire rod for prestressed steel 预应力钢丝及钢绞线用热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 14981-2009 |
Dimension，shape，mass and tolerance for hot-Rolled round wire rod 热轧圆盘条尺寸、外形、重量及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 24107.1-2009 |
Instrument for soil test - Triaxial apparatus - Part 1: Strain contRolled triaxial apparatus 土工试验仪器 三轴仪 第1部分：应变控制式三轴仪 |
China National Standards Rolled |
English PDF |
| GB/T 16462.8-2009 |
Test conditions for numerically contRolled turning machines and turning centres - Part 8: Evaluation of thermal distortions 数控车床和车削中心检验条件 第8部分：热变形的评定 |
China National Standards Rolled |
English PDF |
| GB/T 16462.7-2009 |
Test conditions for numerically contRolled turning machines and turning centres - Part 7: Evaluation of contouring performance in the coordinate planes 数控车床和车削中心检验条件 第7部分：在坐标平面内轮廓特性的评定 |
China National Standards Rolled |
English PDF |
| GB/T 23244-2009 |
Fruit and vegetables - Principles and techniques of the contRolled atmosphere method of storage 水果和蔬菜 气调贮藏技术规范 |
China National Standards Rolled |
English PDF |
| GB/T 23253-2009 |
Hydraulic fluid power - Electrically contRolled hydraulic pumps - Test methods to determine performance characteristics 液压传动 电控液压泵 性能试验方法 |
China National Standards Rolled |
English PDF |
| GB 22998-2008 |
Safety of machine tools - Large numerically contRolled turning machines and turning centres 机床安全 大规格数控车床与车削中心 |
China National Standards Rolled |
English PDF |
| GB 22997-2008 |
Safety of machine tools - Small numerically contRolled turning machines and turning centres 机床安全 小规格数控车床与车削中心 |
China National Standards Rolled |
English PDF |
| GB/T 22918-2008 |
Technical requirements for temperature-contRolled transportation of perishable food 易腐食品控温运输技术要求 |
China National Standards Rolled |
English PDF |
| GB 22659-2008 |
Safety of woodworking machines - Numerically contRolled (NC)boring machines and routing machines 木工机床安全 数控钻床和数控镂铣机 |
China National Standards Rolled |
English PDF |
| GB 9706.13-2008 |
Medical electrical equipment - Part 2: Particular requirements for the safety of automatically-contRolled brachytherapy afterloading equipment 医用电气设备 第2部分：自动控制式近距离治疗后装设备安全专用要求 |
China National Standards Rolled |
English PDF |
| GB/T 710-2008 |
Hot-Rolled quality carbon structural steel sheets and strips 优质碳素结构钢热轧薄钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 14977-2008 |
General requirement for surface condition of hot-Rolled steel plates 热轧钢板表面质量的一般要求 |
China National Standards Rolled |
English PDF |
| GB/T 13790-2008 |
Cold Rolled low carbon steel sheets and strips for vitreous enamelling 搪瓷用冷轧低碳钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB 912-2008 |
Hot-Rolled sheets and strips of carbon structural steels and high strength low alloy structural steels 碳素结构钢和低合金结构钢热轧薄钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 711-2008 |
Hot-Rolled quality carbon structural steel plates, sheets and wide strips 优质碳素结构钢热轧厚钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 5213-2008 |
Cold Rolled low carbon steel sheet and strip 冷轧低碳钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 2523-2008 |
Measuring method of surface roughness and peak count for cold-Rolled metal sheet (strip) 冷轧金属薄板（带）表面粗糙度和峰值数的测量方法 |
China National Standards Rolled |
English PDF |
| GB/T 2521-2008 |
Cold-Rolled grain-oriented and non-oriented electrical steel strip (sheet） 冷轧取向和无取向电工钢带(片) |
China National Standards Rolled |
English PDF |
| GB/T 706-2008 |
Hot Rolled section steel 热轧型钢 |
China National Standards Rolled |
English PDF |
| GB/T 702-2008 |
Hot-Rolled steel bars - Dimensions，shape，weight and tolerances 热轧钢棒尺寸、外形、重量及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 701-2008 |
Hot Rolled low carbon steel wire rods 低碳钢热轧圆盘条 |
China National Standards Rolled |
English PDF |
| GB/T 4697-2008 |
Hot-Rolled U-type steel for mine timbering 矿山巷道支护用热轧U型钢 |
China National Standards Rolled |
English PDF |
| GB/T 4354-2008 |
Hot Rolled quality carbon steel wire rods 优质碳素钢热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 3075-2008 |
Metallic materials - Fatigue testing - Axial-force-contRolled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards Rolled |
English PDF |
| GB 13788-2008 |
Cold Rolled ribbed steel wires and bars 冷轧带肋钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 4934.1-2008 |
Instrument for soil test - Shear apparatus - Part 1: Strain-contRolled direct shear apparatus 土工试验仪器 剪切仪 第1部分：应变控制式直剪仪 |
China National Standards Rolled |
English PDF |
| GB/T 8749-2008 |
Hot-Rolled quality carbon structural steel strips 优质碳素结构钢热轧钢带 |
China National Standards Rolled |
English PDF |
| GB/T 4162-2008 |
Forged and Rolled steel bars - Method for ultrasonic testing 锻轧钢棒超声检测方法 |
China National Standards Rolled |
English PDF |
| GB/T 14993-2008 |
Hot-Rolled superalloy bars for rotating parts 转动部件用高温合金热轧棒材 |
China National Standards Rolled |
English PDF |
| GB 1499.1-2008 |
Steel for the reinforcement of concrete - Part 1: Hot Rolled plain bars 钢筋混凝土用钢 第1部分：热轧光圆钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 11253-2007 |
Cold-Rolled sheets and strips of carbon structural steels 碳素结构钢冷轧薄钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 4059-2007 |
Polycrystalline silicon - examination method - zone - melting on phosphorus under contRolled atomosphere 硅多晶气氛区熔基磷检验方法 |
China National Standards Rolled |
English PDF |
| GB/T 3274-2007 |
Hot-Rolled plates and strips of carbon structural steels and high strength low alloy structural steels 碳素结构钢和低合金结构钢热轧厚钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 21074-2007 |
Cold Rolled stainless precision steel strip for needle tubing 针管用不锈钢精密冷轧钢带 |
China National Standards Rolled |
English PDF |
| GB 1499.2-2007 |
Steel for the reinforcement of concrete - Part 2: Hot Rolled bars 钢筋混凝土用钢 第2部分：热轧带肋钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 16462.4-2007 |
Test conditions for numerically contRolled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验 |
China National Standards Rolled |
English PDF |
| GB/T 16462.1-2007 |
Test conditions for numerically contRolled turning machines and turning centers - Part 1: Geometric test for machines with a horizontal workholding spindle 数控车床和车削中心检验条件 第1部分：卧式机床几何精度检验 |
China National Standards Rolled |
English PDF |
| GB 2585-2007 |
Hot-Rolled steel rails for railway 铁路用热轧钢轨 |
China National Standards Rolled |
English PDF |
| GB/T 21043-2007 |
Instrument for soil test - Strain-contRolled unconfined compression apparatus 土工试验仪器 应变控制式无侧限压缩仪 |
China National Standards Rolled |
English PDF |
| GB/T 4237-2007 |
Hot Rolled stainless steel plate, sheet and strip 不锈钢热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 3280-2007 |
Cold Rolled stainless steel plate, sheet and strip 不锈钢冷轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 20887.1-2007 |
Continuously hot Rolled high strength steel sheet and strip for automobile - Part 1: High yield strength steel for cold forming 汽车用高强度热连轧钢板及钢带 第1部分：冷成形用高屈服强度钢 |
China National Standards Rolled |
English PDF |
| GB/T 20853-2007 |
Corrosion of metals and alloys - corrosion in artificial atmosphere - accelerated corrosion test involving exposure under contRolled conditions of humidity cycling and intermittent spraying of a salt solution 金属和合金的腐蚀 人造大气中的腐蚀 暴露于间歇喷洒盐溶液和潮湿循环受控条件下的加速腐蚀试验 |
China National Standards Rolled |
English PDF |
| GB/T 20564.3-2007 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 3: High strength interstitial free steel 汽车用高强度冷连轧钢板及钢带 第3部分：高强度无间隙原子钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.1-2007 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 1：Bake hardening steel 汽车用高强度冷连轧钢板及钢带 第1部分：烘烤硬化钢 |
China National Standards Rolled |
English PDF |
| GB/T 709-2006 |
Dimension,shape,weight and tolerances for hot-Rolled steel plates and sheets 热轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 708-2006 |
Dimension,shape,weight and tolerance for cold-Rolled steel plates and sheets 冷轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 20564.2-2006 |
Continuously cold Rolled high strength steel sheet and strip for automobile - Part 2: Dual phase steel 汽车用高强度冷连轧钢板及钢带 第2部分:双相钢 |
China National Standards Rolled |
English PDF |
| GB/T 20408-2006 |
Radio-contRolled clocks 指针式电波钟 |
China National Standards Rolled |
English PDF |
| GB/T 3932.2-2006 |
Test conditions for manually contRolled milling machines with table of fixed height - Testing of the accuracy - Part 2: Machines with vertical spindle 床身铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards Rolled |
English PDF |
| GB/T 3932.1-2006 |
Test conditions for manually contRolled milling machines with table of fixed height - Testing of the accuracy - Part 1: Machines with horizontal spindle 床身铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards Rolled |
English PDF |
| GB/T 20015-2005 |
Metallic and other inorganic coatings -- Automated contRolled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish 金属和其它无机覆盖层 电镀镍、自催化镀镍、电镀铬及最后精饰 自动控制喷丸硬化前处理 |
China National Standards Rolled |
English PDF |
| GB/T 3524-2005 |
Hot-Rolled carbon and low alloy structural steel strips 碳素结构钢和低合金结构钢热轧钢带 |
China National Standards Rolled |
English PDF |
| GB/T 3273-2005 |
Hot-Rolled steel plates(sheets)and strips for automobile frames 汽车大梁用热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB 4706.78-2005 |
Safety of household and similar electrical appliances Part2:Particular requirements for pedestrian contRolled mains-operated lawnmowers 家用和类似用途电器的安全 第二部分:步行控制的电动割草机的特殊要求 |
China National Standards Rolled |
English PDF |
| GB/T 5065-2004 |
Hot-dip lead-tin alloy coated cold Rolled carbon steel sheets and strips 热镀铅锡合金碳素钢冷轧薄钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 17421.4-2003 |
Test code for machine tools--Part 4: Circular tests for numerically contRolled machine tools 机床检验通则 第4部分:数控机床的圆检验 |
China National Standards Rolled |
English PDF |
| GB 4706.65-2003 |
Safety of household and similar electrical appliances--Particular requirements for pedestrian-contRolled mains-operated lawn scarifiers and aerators 家用和类似用途电器的安全 步行控制的电动草坪松土机和松砂机的专用要求 |
China National Standards Rolled |
English PDF |
| GB 19157-2003 |
General specification for remote-contRolled fire monitor systems 远控消防炮系统通用技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 6255-2001 |
General specification for space-charge contRolled tubes 空间电荷控制电子管总规范 |
China National Standards Rolled |
English PDF |
| GB/T 3278-2001 |
Hot-Rolled carbon tool steel sheets and plates 碳素工具钢热轧钢板 |
China National Standards Rolled |
English PDF |
| GB/T 8867-2001 |
Simple contRolled atmospheres cold storage technique of garlic bolt 蒜苔简易气调冷藏技术 |
China National Standards Rolled |
English PDF |
| GB/T 6588-2000 |
Semiconductor devices--Discrete devices--Part 3:Signal(including switching) and regulator diodes--Section One--Blank detail specification for signal diodes，switching diodes and contRolled-avalanche diodes 半导体器件 分立器件 第3部分:信号(包括开关)和调整二极管 第1篇 信号二极管、开关二极管和可控雪崩二极管空白详细规范 |
China National Standards Rolled |
English PDF |
| GB/T 18025-2000 |
Agricultural irrigation--Wiring and equipment for electrically driven or contRolled irrigation machines 农业灌溉设备 电动或电控灌溉机械的电气设备和布线 |
China National Standards Rolled |
English PDF |
| GB/T 17421.2-2000 |
Test codefor machine tools--Part 2:Determination of accuracy and repeatability of positioning numerically contRolled axes 机床检验通则 第2部分:数控轴线的定位精度和重复定位精度的确定 |
China National Standards Rolled |
English PDF |
| GB/T 4857.15-1999 |
Packaging--Transport packages--ContRolled horizontal impack test method 包装 运输包装件 可控水平冲击试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 16656.203-1997 |
Industrial automation systems and integration--Product data representationand exchange--Part 203:Application protocol:Configuration contRolled design 工业自动化系统与集成 产品数据的表达与交换 第203部分:应用协议:配置控制设计 |
China National Standards Rolled |
English PDF |
| GB/T 16462-1996 |
Numerically contRolled turning machines--Testing of the accuracy 数控卧式车床 精度检验 |
China National Standards Rolled |
English PDF |
| GB/T 3414-1994 |
Hot-Rolled profiled steels for coal mechanism 煤机用热轧异型钢 |
China National Standards Rolled |
English PDF |
| GB/T 14292-1993 |
Hot-Rolled long products technical requirements for carbon structure steel and low-alloy structure steel 碳素结构钢和低合金结构钢热轧条钢技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 716-1991 |
Cold-Rolled carbon structural steel strips 碳素结构钢冷轧钢带 |
China National Standards Rolled |
English PDF |
| GB/T 715-1989 |
Hot-Rolled round carbon steel bars for standard parts 标准件用碳素钢热轧圆钢 |
China National Standards Rolled |
English PDF |
| GB 8602-1988 |
Rough-Rolled tyres for railway 铁路用粗制轮箍 |
China National Standards Rolled |
English PDF |
| GB 8601-1988 |
Rolled solid wheels for railway 铁路用辗钢整体车轮 |
China National Standards Rolled |
English PDF |
| GB/T 3522-1983 |
Cold-Rolled quality carbon structural steel strips 优质碳素结构钢冷轧钢带 |
China National Standards Rolled |
English PDF |
| Find out:345Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
