Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 21628-2008 |
Dangerous goods - External fire test method of division 1.6 article 危险品 1.6项物品的外部火烧试验方法 |
China National Standards article, |
 English PDF |
| GB/T 21572-2008 |
Dangerous goods - Test method of external fire for division 1.5 article 危险品 1.5项物品的外部火烧试验方法 |
China National Standards article, |
English PDF |
| GB/T 21524-2008 |
Particle size determination of inorganic chemical products - Sieving method 无机化工产品中粒度的测定 筛分法 |
China National Standards article, |
English PDF |
| GB/T 21540-2008 |
Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation 液压传动 液体在线自动颗粒计数系统 校准和验证方法 |
China National Standards article, |
English PDF |
| GB/T 5542-2007 |
Dyestuffs - Determination of large particles - Filter method of single layer filter cloth 染料 大颗粒的测定 单层滤布过滤法 |
China National Standards article, |
English PDF |
| GB/T 21137-2007 |
Leaf tobacco - determination of strip particle size 烟叶 片烟大小的测定 |
China National Standards article, |
English PDF |
| GB/T 21133-2007 |
Environmental tobacco smoke Estimation of its contribution to respirable suspended particles Method based on solanesol 环境烟草烟气 可吸入悬浮颗粒物的估测 茄呢醇法 |
China National Standards article, |
English PDF |
| GB/T 21131-2007 |
Environmental tobacco smoke Estimation of its contribution to respirable suspended particles Determination of particulate matter by ultraviolet absorbance and by fluorescence 环境烟草烟气 可吸入悬浮颗粒物的估测 用紫外吸收法和荧光法测定粒相物 |
China National Standards article, |
English PDF |
| GB/T 6167-2007 |
Methods for testing the performance of airborne particle counter 尘埃粒子计数器性能试验方法 |
China National Standards article, |
English PDF |
| GB/T 9444-2007 |
Magnetic particle testing for steel castings 铸钢件磁粉检测 |
China National Standards article, |
English PDF |
| GB/T 20966-2007 |
Determination of particle size distribution for colliery powders 煤矿粉尘粒度分布测定方法 |
China National Standards article, |
English PDF |
| GB/T 8243.12-2007 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分：采用颗粒计数法测定滤清效率和容灰量 |
China National Standards article, |
English PDF |
| GB 21027-2007 |
Request in common use of security for student’s articles 学生用品的安全通用要求 |
China National Standards article, |
English PDF |
| GB/T 5719-2006 |
Rubber sealing articles - Vocabulary 橡胶密封制品 词汇 |
China National Standards article, |
English PDF |
| GB/T 15105.1-2006 |
Molding articles from wood particle Part 1: Interior use 模压刨花制品 第1部分：室内用 |
China National Standards article, |
English PDF |
| GB/T 20170.1-2006 |
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定 |
China National Standards article, |
English PDF |
| GB 2626-2006 |
Respiratory protective equipment -- non-powered air-purifying particle respirator 呼吸防护用品――自吸过滤式防颗粒物呼吸器 |
China National Standards article, |
English PDF |
| GB/T 20405.3-2006 |
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分：筛分法对粒径分布的测定 |
China National Standards article, |
English PDF |
| GB/T 20117-2006 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders 精细陶瓷粉体颗粒尺寸分布测试用样品的制备 |
China National Standards article, |
English PDF |
| GB/T 15445.4-2006 |
Representation of results of particle size analysis - Part 4: Characterization of a classification process 粒度分析结果的表述 第4部分：分级过程的表征 |
China National Standards article, |
English PDF |
| GB/T 15445.2-2006 |
Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions 粒度分析结果的表述 第2部分：由粒度分布计算平均粒径/直径和各次矩 |
China National Standards article, |
English PDF |
| GB/T 20170.1-2006 |
Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定 |
China National Standards article, |
English PDF |
| GB 16487.3-2005 |
Environmental protection control standard for imported solid wastes as raw materials -- Wood and wood articles wastes 进口可用作原料的固体废物环境保护控制标准 木、木制品废料 |
China National Standards article, |
English PDF |
| GB/T 20015-2005 |
Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish 金属和其它无机覆盖层 电镀镍、自催化镀镍、电镀铬及最后精饰 自动控制喷丸硬化前处理 |
China National Standards article, |
English PDF |
| GB/T 19921-2005 |
Test method of particles on silicon wafer surfaces 硅抛光片表面颗粒测试方法 |
China National Standards article, |
English PDF |
| GB/T 15822.3-2005 |
Non-destructive testing-Magnetic particle testing-Part 3:Equipment 无损检测 磁粉检测 第3部分：设备 |
China National Standards article, |
English PDF |
| GB/T 15822.2-2005 |
Non-desstructive testing-Magnetic particle testing-Part 2:Detection media 无损检测 磁粉检测 第2部分：检测介质 |
China National Standards article, |
English PDF |
| GB/T 15822.1-2005 |
Non-destructive testing-Magnetic particle testing-Part 1:General principles 无损检测 磁粉检测 第1部分：总则 |
China National Standards article, |
English PDF |
| GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards article, |
English PDF |
| GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards article, |
English PDF |
| GB/T 5097-2005 |
Non-destructive testing-Penetrant testing and magnetic particle testing-Viewing conditions 无损检测 渗透检测和磁粉检测 观察条件 |
China National Standards article, |
English PDF |
| GB/T 19632-2005 |
Classification and codes for the service、equipments and articles of funeral and interment 殡葬服务、设施、用品分类与代码 |
China National Standards article, |
English PDF |
| GB/T 19627-2005 |
Particle size analysis-Photon correlation spectroscopy 粒度分析--光子相关光谱法 |
China National Standards article, |
English PDF |
| GB/T 13221-2004 |
Nanometer powder--Determination of particle size distribution--Small angle X-ray scattering method 纳米粉末粒度分布的测定 X射线小角散射法 |
China National Standards article, |
English PDF |
| GB/T 6609.28-2004 |
Chemical analysis methods and determination of physical performance of alumina--Determination of the fine particle size distribution(less than 60μm)--Method using electroformed sieves 氧化铝化学分析方法和物理性能测定方法 小于60μm的细粉末粒度分布的测定 湿筛法 |
China National Standards article, |
English PDF |
| GB/T 6524-2003 |
Metallic powders--Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement 金属粉末 粒度分布的测量 重力沉降光透法 |
China National Standards article, |
English PDF |
| GB/T 8243.4-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency，life and cumulative efficiency(gravimetric method) 内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法) |
China National Standards article, |
English PDF |
| GB/T 14634.4-2002 |
Test methods of rare earth three-band phosphors for fluorescent lamps--Determination of particle size distribution by electric sensing zone technique 灯用稀土三基色荧光粉试验方法 电传感法粒度分布测定 |
China National Standards article, |
English PDF |
| GB/T 18854-2002 |
Hydraulic fluid power--Calibration of liquid automatic particle counters 液压传动 液体自动颗粒计数器的校准 |
China National Standards article, |
English PDF |
| GB/T 14039-2002 |
Hydraulic fluid power--Fluids--Method for coding the level of contamination by solid particles 液压传动 油液 固体颗粒污染等级代号 |
China National Standards article, |
English PDF |
| GB/T 6461-2002 |
Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 |
China National Standards article, |
English PDF |
| GB/T 13912-2002 |
Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods 金属覆盖层 钢铁制件热浸镀锌层技术要求及试验方法 |
China National Standards article, |
English PDF |
| GB/T 18592-2001 |
Metallic coating--Hot dipped aluminium coatings on ferrous articles--Specification 金属覆盖层 钢铁制品热浸镀铝 技术条件 |
China National Standards article, |
English PDF |
| GB/T 5758-2001 |
Determination for particle size range，effective size and uniformity coefficient of ion exchange resins 离子交换树脂粒度、有效粒径和均一系数的测定 |
China National Standards article, |
English PDF |
| GB/T 5051-2000 |
General technical conditions for the particle forming machine 刨花铺装机通用技术条件 |
China National Standards article, |
English PDF |
| GB/T 18264-2000 |
Acceptance generality of the particle board production line 刨花板生产线验收通则 |
China National Standards article, |
English PDF |
| GB/T 12496.2-1999 |
Test methods of wooden activated carbon--Determination of particle size distribution 木质活性炭试验方法 粒度的测定 |
China National Standards article, |
English PDF |
| GB/T 7702.2-1997 |
Standard test method for granular activated carbon from coal--Determination of particle size 煤质颗粒活性炭试验方法 粒度的测定 |
China National Standards article, |
English PDF |
| GB/T 4734-1996 |
Methods of chemical analysis for ceramic materials and articles 陶瓷材料及制品化学分析方法 |
China National Standards article, |
English PDF |
| GB/T 16144-1995 |
Annual limits on intakes for radioactive aerosol with different particle size 不同粒度放射性气溶胶年摄入量限值 |
China National Standards article, |
English PDF |
| GB/T 10091.1-1995 |
Tabular layouts of article characteristics--Definitions and principles 事物特性表 定义和原理 |
China National Standards article, |
English PDF |
| GB/T 13220-1991 |
Determination of particle size distribution of fine powder--Method of sieve classfication with sonic wave 细粉末粒度分布的测定 声波筛分法 |
China National Standards article, |
English PDF |
| GB/T 12005.7-1989 |
Determination of particle size of powder polyacry-lamide 粉状聚丙烯酰胺粒度测定方法 |
China National Standards article, |
English PDF |
| GB/T 11107-1989 |
Metallic and its compound powder--Determination of specific surface and particle size by air permeating method 金属及其化合物粉末 比表面积和粒度测定 空气透过法 |
China National Standards article, |
English PDF |
| GB/T 10305-1988 |
Test method for particle distribution of cathode carb-onates by centrifugation sedimentation 阴极碳酸盐粒度分布的测定 离心沉降法 |
China National Standards article, |
English PDF |
| GB/T 6288-1986 |
Determination of particle size for granular molecular sieve 粒状分子筛粒度测定方法 |
China National Standards article, |
English PDF |
| GB 5172-1985 |
The rule for radiation protection of particle accelerators 粒子加速器辐射防护规定 |
China National Standards article, |
English PDF |
| GB/T 4195-1984 |
Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles 钨、钼粉末粒度分布测试方法(沉降天平法) |
China National Standards article, |
English PDF |
| Find out:258Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
