Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 35999.3-2018 |
Prerequisite programmes on food safety—Part 3: Farming 食品质量控制前提方案 第3部分：农场 |
China National Standards site |
 English PDF |
| GB/T 8243.15-2018 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分：复合材料滤清器的振动疲劳试验 |
China National Standards site |
English PDF |
| GB/T 35999.4-2018 |
Prerequisite programmes on food safety—Part 4: Food packaging manufacturing 食品质量控制前提方案 第4部分：食品包装的生产 |
China National Standards site |
English PDF |
| GB/T 36112-2018 |
Specification for service site management of administrative service centre 政务服务中心服务现场管理规范 |
China National Standards site |
English PDF |
| GB/T 35821-2018 |
Determination of biomass content in biomass/plastic composites 生物质/塑料复合材料生物质含量测定方法 |
China National Standards site |
English PDF |
| GB/T 36172-2018 |
Polyethylene sleeving of ductile iron pipelines for site application 现场安装聚乙烯套球墨铸铁管线 |
China National Standards site |
English PDF |
| GB/T 35612-2017 |
Green product assessment—Wood plastic composites products 绿色产品评价 木塑制品 |
China National Standards site |
English PDF |
| GB/T 7251.4-2017 |
Low-voltage switchgear and controlgear assemblies—Part 4: Particular requirements for assemblies for construction sites (ACS) 低压成套开关设备和控制设备 第4部分：对建筑工地用成套设备（ACS）的特殊要求 |
China National Standards site |
English PDF |
| GB/T 34939.1-2017 |
D.C.±800kV composite post insulator—Part 1: Composite post insulator with resin impregnated glass fibers solid core ±800kV直流支柱复合绝缘子 第1部分：环氧玻璃纤维实心芯体复合绝缘子 |
China National Standards site |
English PDF |
| GB/T 34937-2017 |
Insulators for overhead lines—Composite suspension and tension insulators for d.c.systems with a nominal voltage greater than 1500 V—Definitions, test methods and acceptance criteria 架空线路绝缘子 标称电压高于1500 V直流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则 |
China National Standards site |
English PDF |
| GB/T 34867.1-2017 |
Procedures for measurement and verification of motor-system energy-savings—Part 1: Test procedures on working site for energy efficiency of motor 电动机系统节能量测量和验证方法 第1部分：电动机现场能效测试方法 |
China National Standards site |
English PDF |
| GB/T 34886-2017 |
Non-destructive testing—Test method for laser shearography of composite materials 无损检测 复合材料激光错位散斑检测方法 |
China National Standards site |
English PDF |
| GB/T 34749-2017 |
Fire-resistance tests for wood and wood composite material—Cone calorimeter method 木材及木质复合材料耐火试验方法 锥形量热仪法 |
China National Standards site |
English PDF |
| GB/T 34925-2017 |
On-site inspections method of a.c. circuit systems for 110 kV substations on plateau 高原110 kV变电站交流回路系统现场检验方法 |
China National Standards site |
English PDF |
| GB/T 34751-2017 |
Utilization site classification of rangeland 天然草地利用单元划分 |
China National Standards site |
English PDF |
| GB/T 34973-2017 |
On-site measurements of obstrusive light of LED panals LED显示屏干扰光现场测量方法 |
China National Standards site |
English PDF |
| GB/T 34332-2017 |
Chemical analysis of magnesite and dolomite refractory products 菱镁矿和白云石耐火制品化学分析方法 |
China National Standards site |
English PDF |
| GB/T 34556-2017 |
Impact test method for aluminium matrix composites 铝基复合材料冲击试验方法 |
China National Standards site |
English PDF |
| GB/T 34559-2017 |
Test method for compressive property of C/C composites 碳/碳复合材料压缩性能试验方法 |
China National Standards site |
English PDF |
| GB/T 34558-2017 |
Terminology for metal matrix composites 金属基复合材料术语 |
China National Standards site |
English PDF |
| GB/T 34437-2017 |
Test method of the oxygen permeability of the multilayer composite plastics pipe 多层复合塑料管材氧气渗透性能测试方法 |
China National Standards site |
English PDF |
| GB/T 34625-2017 |
Metallic and other inorganic coatings—Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes—Specification and test methods 金属及其他无机覆盖层 电气、电子和工程用金和金合金电镀层 技术规范和试验方法 |
China National Standards site |
English PDF |
| GB/T 34445-2017 |
Test method of hot-tack property for heat sealing surfaces of thermoplastic polymer and thermoplastic composite material 热塑性塑料及其复合材料热封面热粘性能测定 |
China National Standards site |
English PDF |
| GB/T 34182-2017 |
Composite cable bracket 复合材料电缆支架 |
China National Standards site |
English PDF |
| GB/T 34180-2017 |
Thermal insulation products for building applications—Determination of the resistance to impact of external thermal insulation composite systems(ETICS) 建筑用绝热制品 外墙外保温系统抗冲击性测定 |
China National Standards site |
English PDF |
| GB/T 34241-2017 |
Spiral wound composite polyamide reverse osmosis membrane element 卷式聚酰胺复合反渗透膜元件 |
China National Standards site |
English PDF |
| GB/T 4724-2017 |
Composite base copper clad laminated sheets for printed circuits 印制电路用覆铜箔复合基层压板 |
China National Standards site |
English PDF |
| GB/T 34011-2017 |
Thermal insulation products for building applications—Determination of the pull-off resistance of external thermal insulation composite systems(ETICS)(foam block test) 建筑用绝热制品 外墙外保温系统抗拉脱性能的测定（泡沫块试验） |
China National Standards site |
English PDF |
| GB/T 33600-2017 |
Sandwich composite wallboard with porous concrete using metal tailings 金属尾矿多孔混凝土夹芯系统复合墙板 |
China National Standards site |
English PDF |
| GB/T 34006-2017 |
Cardanol modified phenolic resin for composite material 复合材料用腰果酚改性酚醛树脂 |
China National Standards site |
English PDF |
| GB/T 33948.2-2017 |
Method for chemical analysis of copper-steel composite metal—Part 2：Determination of zinc content—Na2EDTA titration method 铜-钢复合金属化学分析方法 第2部分：锌含量的测定 Na2EDTA滴定法 |
China National Standards site |
English PDF |
| GB/T 33948.1-2017 |
Method for chemical analysis of copper-steel composite metal—Part 1：Determination of copper content—Iodine titration method 铜-钢复合金属化学分析方法 第1部分：铜含量的测定 碘量法 |
China National Standards site |
English PDF |
| GB/T 33825-2017 |
Steel/copper composite rod and wire for hermetically sealed relay 密封继电器用钢包铜复合棒线材 |
China National Standards site |
English PDF |
| GB/T 33614-2017 |
Test method for compression properties of 3D braided fabric and its polymer matrix composites 三维编织物及其树脂基复合材料压缩性能试验方法 |
China National Standards site |
English PDF |
| GB/T 33613-2017 |
Test method for tensile properties of 3D braided fabric and its polymer matrix composites 三维编织物及其树脂基复合材料拉伸性能试验方法 |
China National Standards site |
English PDF |
| GB/T 33676-2017 |
Technical specifications for inspection of lightning protection system in telecommunication site (station) 通信局(站)防雷装置检测技术规范 |
China National Standards site |
English PDF |
| GB/T 33621-2017 |
Test method for bending properties of 3D braided fabric and its polymer matrix composites 三维编织物及其树脂基复合材料弯曲性能试验方法 |
China National Standards site |
English PDF |
| GB/T 33639-2017 |
CNC hydraulic punching and drilling composite machine for plates 数控液压冲钻复合机 |
China National Standards site |
English PDF |
| GB/T 33499-2017 |
The steel frame composite panels made from foamed cement 钢框架发泡水泥芯材复合板 |
China National Standards site |
English PDF |
| GB/T 33501-2017 |
Test method for tensile property of C/C composites 碳/碳复合材料拉伸性能试验方法 |
China National Standards site |
English PDF |
| GB/T 23506-2017 |
The gas-fuel power set for oil pruduction drilling site 石油采油井场燃气动力机组 |
China National Standards site |
English PDF |
| GB/T 35185-2017 |
Composite reinforced line pipe for the petroleum and natural gas industry 石油天然气工业用复合材料增强管线钢管 |
China National Standards site |
English PDF |
| GB/T 35463-2017 |
Test method for bulk density of wood-plastic composites and products 木塑复合材料及制品体积密度的测定方法 |
China National Standards site |
English PDF |
| GB/T 35266-2017 |
Textiles—Determination of splitting rates of composite microfibers in fabrics 纺织品 织物中复合超细纤维开纤率的测定 |
China National Standards site |
English PDF |
| GB/T 35462-2017 |
Test method of mechanical fasteners in wood-plastic composites and products for construction 建筑用木塑复合材料及制品机械紧固件的测试方法 |
China National Standards site |
English PDF |
| GB/T 35469-2017 |
Test method of anti-mold activity of building wood-plastic composites 建筑木塑复合材料防霉性能测试方法 |
China National Standards site |
English PDF |
| GB/T 35751-2017 |
Nonwovens and composite nonwovens for automotive interior 汽车装饰用非织造布及复合非织造布 |
China National Standards site |
English PDF |
| GB/T 35156-2017 |
Fiber reinforced polymer composites structural cables 结构用纤维增强复合材料拉索 |
China National Standards site |
English PDF |
| GB/T 23507.4-2017 |
Criterion for electrical equipment for oil drilling rig—Part 4: Auxiliary power equipment and circuits for well site 石油钻机用电气设备规范 第4部分：辅助用电设备及井场电路 |
China National Standards site |
English PDF |
| GB/T 35284-2017 |
Information security technology - Requirements and assessment methods for website identity and system security 信息安全技术 网站身份和系统安全要求与评估方法 |
China National Standards site |
English PDF |
| GB/T 35465.2-2017 |
Test method for fatigue properties of polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data 聚合物基复合材料疲劳性能测试方法 第2部分：线性或线性化应力寿命（S-N）和应变寿命（ε-N）疲劳数据的统计分析 |
China National Standards site |
English PDF |
| GB/T 35465.3-2017 |
Test method for fatigue properties of polymer matrix composite materials -Part 3: Tension-tension fatigue 聚合物基复合材料疲劳性能测试方法 第3部分：拉-拉疲劳 |
China National Standards site |
English PDF |
| GB/T 35465.1-2017 |
Test method for fatigue properties of polymer matrix composite materials—Part 1：General principle 聚合物基复合材料疲劳性能测试方法 第1部分：通则 |
China National Standards site |
English PDF |
| GB/T 35466-2017 |
Determination of the emission of volatile organic compounds form wood-plastic composite for construction 建筑用木塑复合材料挥发性有机化合物（VOC）测定 |
China National Standards site |
English PDF |
| GB/T 35169-2017 |
Test method of weatherability for external thermal insulation composite systems of building 建筑外墙外保温系统耐候性试验方法 |
China National Standards site |
English PDF |
| GB/T 35484.2-2017 |
Earth-moving machinery and mobile road construction machinery—Worksite data exchange—Part 2: Data dictionary 土方机械和移动式道路施工机械 工地数据交换 第2部分：数据字典 |
China National Standards site |
English PDF |
| GB/T 35484.1-2017 |
Earth-moving machinery and mobile road construction machinery－Worksite data exchange－Part 1: System architecture 土方机械和移动式道路施工机械 工地数据交换 第1部分：系统体系 |
China National Standards site |
English PDF |
| GB/T 22587-2017 |
Matrix to superconductor volume ratio measurement—Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires 基体与超导体体积比测量 铜-铌鈦（Cu Nb-Ti）复合超导线铜-超[体积]比的测量 |
China National Standards site |
English PDF |
| GB/T 35752-2017 |
Warp-knitted composite geotextiles 经编复合土工织物 |
China National Standards site |
English PDF |
| GB/T 35287-2017 |
Information security technology—Guidelines of trusted identity technology for website 信息安全技术 网站可信标识技术指南 |
China National Standards site |
English PDF |
| GB/T 33389-2016 |
Woven fabrics and woven composite fabrics for automotive interior 汽车装饰用机织物及机织复合物 |
China National Standards site |
English PDF |
| GB/T 33334-2016 |
Test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies(composite and composite) 胶粘剂单搭接拉伸剪切强度试验方法（复合材料对复合材料） |
China National Standards site |
English PDF |
| GB/T 33276-2016 |
Knitted fabrics and knitted composite fabrics for automotive interior 汽车装饰用针织物及针织复合物 |
China National Standards site |
English PDF |
| GB 31604.23-2016 |
National Food Safety Standard-Food contact materials and products-Determination of diaminotoluene in composite food contact materials 食品安全国家标准 食品接触材料及制品 复合食品接触材料中二氨基甲苯的测定 |
China National Standards site |
English PDF |
| GB/T 17748-2016 |
Aluminium-plastic composite panel for curtain wall 建筑幕墙用铝塑复合板 |
China National Standards site |
English PDF |
| GB/T 32990-2016 |
Smart perfusion machine for cast-in-situ foam concrete composite wall 现浇泡沫混凝土复合墙体智能灌注机 |
China National Standards site |
English PDF |
| GB/T 22412-2016 |
Aluminium-plastic composite panel for ordinary decoration 普通装饰用铝塑复合板 |
China National Standards site |
English PDF |
| GB/T 32724-2016 |
Format for recording soil and site information 记录土壤和现场信息的格式 |
China National Standards site |
English PDF |
| GB/T 32787-2016 |
Technical specification for manganese ferroalloy dust cold-press composite pellet 锰系铁合金粉尘冷压复合球团技术规范 |
China National Standards site |
English PDF |
| GB 18565-2016 |
Composite performance requirement and detecting methods for road transport vehicles 道路运输车辆综合性能要求和检验方法 |
China National Standards site |
English PDF |
| GB/T 6113.104-2016 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-4: Radio disturbance and immunity measuring apparatus—Antennas and test sites for radiated disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第1-4部分: 无线电骚扰和抗扰度测量设备 辐射骚扰测量用天线和试验场地 |
China National Standards site |
English PDF |
| GB/T 32586-2016 |
Railway applications—Fixed installations—Electric traction specific requirements for composite insulators used for overhead contact line systems 轨道交通 地面装置 电力牵引架空接触网系统用复合绝缘子的特定要求 |
China National Standards site |
English PDF |
| GB/T 19161-2016 |
Packing containers—Composite intermediate bulk container 包装容器 复合式中型散装容器 |
China National Standards site |
English PDF |
| GB/T 32498-2016 |
Metal matrix composites—Tensile testing—Method of test at ambient temperature 金属基复合材料 拉伸试验 室温试验方法 |
China National Standards site |
English PDF |
| GB/T 32497-2016 |
Test method of ballistic resistance against fragment simulating projectiles for fiber-reinforced composites—V50 method 纤维增强复合材料抗破片模拟弹性能试验方法 V50法 |
China National Standards site |
English PDF |
| GB/T 32496-2016 |
Test method for volume fraction of reinforcement in metal matrix composites—Image analysis method 金属基复合材料增强体体积含量试验方法 图像分析法 |
China National Standards site |
English PDF |
| GB/T 32493-2016 |
Test method of ballistic resistance for fibre reinforced composites—Specific absorbed energy by perforation method 纤维增强复合材料抗弹性能试验方法 贯穿比吸能法 |
China National Standards site |
English PDF |
| GB/T 32502-2016 |
Overhead electrical stranded conductors composite core supported/reinforced 复合材料芯架空导线 |
China National Standards site |
English PDF |
| GB/T 32484-2016 |
Watch-cases and accessories—Vapour phase deposited coatings 表壳体及其附件 气相沉积镀层 |
China National Standards site |
English PDF |
| GB/T 32377-2015 |
Dynamic punch-shear properties test method for fibre reinforced composites 纤维增强复合材料动态冲击剪切性能试验方法 |
China National Standards site |
English PDF |
| GB/T 32376-2015 |
Elastic constants test method for fibre reinforced composites 纤维增强复合材料弹性常数测试方法 |
China National Standards site |
English PDF |
| GB/T 32439-2015 |
Cross helically wound steel wires reinforced-polyethylene composite pipelines for water supply 给水用钢丝网增强聚乙烯复合管道 |
China National Standards site |
English PDF |
| GB/T 8243.13-2015 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 |
China National Standards site |
English PDF |
| GB/T 31980-2015 |
Recycling copper wire for electrodeposited copper foil 电解铜箔用再生铜线 |
China National Standards site |
English PDF |
| GB/T 31976-2015 |
Aluminium alloy sheets used for sound-absorbing composite panel with through-hole 复合通孔吸声用铝合金板材 |
China National Standards site |
English PDF |
| GB/T 31968-2015 |
Rare earth composite yttrium zirconium oxide ceramic powder 稀土复合钇锆陶瓷粉 |
China National Standards site |
English PDF |
| GB/T 31940-2015 |
Bi-metal composite corrosion resistance steel pipe for fluid transportation 流体输送用双金属复合耐腐蚀钢管 |
China National Standards site |
English PDF |
| GB/T 31780-2015 |
Critical temperature measurement—Critical temperature of composite superconductors by a resistance method 临界温度测量 电阻法测复合超导体临界温度 |
China National Standards site |
English PDF |
| GB/T 31539-2015 |
Pultruded fiber reinforced polymer composites structural profiles 结构用纤维增强复合材料拉挤型材 |
China National Standards site |
English PDF |
| GB/T 31566-2015 |
Metallic coatings—Physical vapour-deposited coatings of aluminium—Specification and test methods 金属覆盖层 物理气相沉积铝涂层 技术规范与检测方法 |
China National Standards site |
English PDF |
| GB/T 7251.7-2015 |
Low-voltage switchgear and controlgear assemblies—Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicles charging stations 低压成套开关设备和控制设备 第7部分：特定应用的成套设备--如码头、露营地、市集广场、电动车辆充电站 |
China National Standards site |
English PDF |
| GB/T 31527-2015 |
Mechanical properties measurement—Room temperature tensile test of NbTi/Cu composite superconductors 力学性能测量 NbTi/Cu复合超导线室温拉伸试验方法 |
China National Standards site |
English PDF |
| GB/T 31522-2015 |
Matrix to superconductor volume ratio measurement—Copper to non-copper volume ratio of Nb3Sn composite superconducting wires 基体与超导体体积比测试 Nb3Sn复合超导线铜与非铜体积比 |
China National Standards site |
English PDF |
| GB/T 31515-2015 |
Seamless polyethylene-aluminum coextruded composite tube 无缝铝塑共挤出复合软管 |
China National Standards site |
English PDF |
| GB/T 31435-2015 |
Safety evaluation methods on the materials of external thermal insulation composite systems 外墙外保温系统材料安全性评价方法 |
China National Standards site |
English PDF |
| GB/T 15635-2014 |
Electronic data interchange for administration, commerce and transport (EDIFACT)―Composite data elements directory 行政、商业和运输业电子数据交换 复合数据元目录 |
China National Standards site |
English PDF |
| GB/T 30971-2014 |
Software engineering―Recommended practice for the internet―Web site engineering, web site management, and web site life cycle 软件工程 用于互联网的推荐实践 网站工程、网站管理和网站生存周期 |
China National Standards site |
English PDF |
| GB/T 31162-2014 |
Technical specification for lightning protection of surface meteorological observing site and duty office 地面气象观测场（室）防雷技术规范 |
China National Standards site |
English PDF |
| GB/T 21421.2-2014 |
Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V― Part 2：Dimensions and characteristics 标称电压高于1 000V 的架空线路用复合绝缘子串元件 第2部分：尺寸与特性 |
China National Standards site |
English PDF |
| GB/T 3356-2014 |
Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials 定向纤维增强聚合物基复合材料弯曲性能试验方法 |
China National Standards site |
English PDF |
| GB/T 3355-2014 |
Test method for in-plane shear response of polymer matrix composite materials 聚合物基复合材料纵横剪切试验方法 |
China National Standards site |
English PDF |
| GB/T 3354-2014 |
Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials 定向纤维增强聚合物基复合材料拉伸性能试验方法 |
China National Standards site |
English PDF |
| GB/T 30974.2-2014 |
Guide for identification and recording of fiber-reinforced composite materials in databases―Part 2: Guide of identification 数据库中纤维增强复合材料标识和收录指南 第2部分：标识指南 |
China National Standards site |
English PDF |
| GB/T 30974.1-2014 |
Guide for identification and recording of fiber-reinforced composite materials in databases―Part 1: Guide of recording mechanical test data 数据库中纤维增强复合材料标识和收录指南 第1部分：力学试验数据收录指南 |
China National Standards site |
English PDF |
| GB/T 30970-2014 |
Test method for the shear properties of polymer matrix composite materials by V-notched beam method 聚合物基复合材料剪切性能V型缺口梁试验方法 |
China National Standards site |
English PDF |
| GB/T 30969-2014 |
Test method for short-beam shear strength of polymer matrix composite materials 聚合物基复合材料短梁剪切强度试验方法 |
China National Standards site |
English PDF |
| GB/T 30968.4-2014 |
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 4: Test method of open-hole compressive strength 聚合物基复合材料层合板开孔/受载孔性能试验方法 第4部分：开孔压缩强度试验方法 |
China National Standards site |
English PDF |
| GB/T 30968.3-2014 |
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 3: Test method of open-hole tensile strength strength 聚合物基复合材料层合板开孔/受载孔性能试验方法 第3部分：开孔拉伸强度试验方法 |
China National Standards site |
English PDF |
| GB/T 30968.2-2014 |
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 2: Test method of filled-hole tension and compression 聚合物基复合材料层合板开孔/受载孔性能试验方法 第2部分：充填孔拉伸和压缩试验方法 |
China National Standards site |
English PDF |
| GB/T 30968.1-2014 |
Test method for open-hole/loaded-hole of polymer matrix composite laminates—Part 1: Test method of bearing response 聚合物基复合材料层合板开孔/受载孔性能试验方法 第1部分：挤压性能试验方法 |
China National Standards site |
English PDF |
| GB/T 30967-2014 |
Practice for fiber reinforcement orientation codes for composite materials 复合材料纤维增强体取向编码方法 |
China National Standards site |
English PDF |
| GB/T 30836-2014 |
Lithium titanium oxide and its carbon composite anode materials for lithium ion battery 锂离子电池用钛酸锂及其炭复合负极材料 |
China National Standards site |
English PDF |
| GB/T 30835-2014 |
Lithium iron phosphate-carbon composite cathode materials for lithium ion battery 锂离子电池用炭复合磷酸铁锂正极材料 |
China National Standards site |
English PDF |
| GB/T 30816-2014 |
Terminology for bio-based composite materials in engineering 工程用生物基复合材料术语 |
China National Standards site |
English PDF |
| GB/T 19519-2014 |
Insulators for overhead lines―Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000V―Definitions, test methods and acceptance criteria 架空线路绝缘子 标称电压高于1 000 V交流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则 |
China National Standards site |
English PDF |
| GB/T 30710-2014 |
Standard test method for creep relaxation of laminated composite gasket materials 层压复合垫片材料蠕变松弛率试验方法 |
China National Standards site |
English PDF |
| GB/T 30709-2014 |
Standard test method for compressibility and recovery of laminated composite gasket materials 层压复合垫片材料压缩率和回弹率试验方法 |
China National Standards site |
English PDF |
| GB/T 30599-2014 |
In situ particulate reinforced ZL101A alloy matrix composites 原位颗粒增强ZL101A合金基复合材料 |
China National Standards site |
English PDF |
| GB/T 30595-2014 |
External thermal insulation composite systems based on extruded polystyrene 挤塑聚苯板（XPS）薄抹灰外墙外保温系统材料 |
China National Standards site |
English PDF |
| GB/T 30593-2014 |
External wall interior insulation composite panel system 外墙内保温复合板系统 |
China National Standards site |
English PDF |
| GB 50194-2014 |
Code for safety of power supply and consumption for construction site 建设工程施工现场供用电安全规范 |
China National Standards site |
English PDF |
| GB/T 50983-2014 |
Code for site investigation of geotechnical engineering for low and intermediate level radioactive wastedi sposal 低、中水平放射性废物处置场岩土工程勘察规范 |
China National Standards site |
English PDF |
| GB 30185-2013 |
The norm of energy consumption for unit product of aluminum-plastic composite panel 铝塑板单位产品能源消耗限额 |
China National Standards site |
English PDF |
| GB/T 30478-2013 |
Woodworking machines―Circular sawing machines for building sites―Nomenclature 木工机床 建筑工地用圆锯机 术语 |
China National Standards site |
English PDF |
| GB/T 24803.3-2013 |
Safety requirements for lifts―Part 3: Prerequisites for certification of conformity of lift systems, lift components and lift functions 电梯安全要求 第3部分：电梯、电梯部件和电梯功能符合性评价的前提条件 |
China National Standards site |
English PDF |
| GB/T 30341-2013 |
Specifications of vehicle drivers training site 机动车驾驶员培训教练场技术要求 |
China National Standards site |
English PDF |
| GB 50901-2013 |
Code for construction of steel-concrete composite structures 钢-混凝土组合结构施工规范 |
China National Standards site |
English PDF |
| GB/T 29906-2013 |
External thermal insulation composite systems based on expanded polystyrene 模塑聚苯板薄抹灰外墙外保温系统材料 |
China National Standards site |
English PDF |
| GB/T 29839-2013 |
Optical fiber composite low-voltage cable for rated voltages up to and including 1kV(Um=1.2kV) 额定电压1kV（Um=1.2kV）及以下光纤复合低压电缆 |
China National Standards site |
English PDF |
| GB/T 29760-2013 |
Nacelle cover of composites for wind power 风力发电复合材料机舱罩 |
China National Standards site |
English PDF |
| GB/T 29766-2013 |
Information security technology - Technical requirements and testing and evaluating approaches of website data recovery products 信息安全技术 网站数据恢复产品技术要求与测试评价方法 |
China National Standards site |
English PDF |
| GB 50917-2013 |
Code for design of steel and concrete composite bridges 钢-混凝土组合桥梁设计规范 |
China National Standards site |
English PDF |
| GB/T 50214-2013 |
Technical code for composite steel-form 组合钢模板技术规范 |
China National Standards site |
English PDF |
| GB/T 29553-2013 |
Spinner cover of composites for wind power 风力发电复合材料整流罩 |
China National Standards site |
English PDF |
| GB/T 29552-2013 |
Fibre reinforced plastics composites bridge decks 纤维增强复合材料桥板 |
China National Standards site |
English PDF |
| GB/T 4012-2013 |
2.6/9.5mm composite coaxial cable for telecommunication use 2.6/9.5mm 同轴综合通信电缆 |
China National Standards site |
English PDF |
| GB/T 4011-2013 |
1.2/4.4mm composite coaxial cable for telecommunication use 1.2/4.4mm 同轴综合通信电缆 |
China National Standards site |
English PDF |
| GB/T 29500-2013 |
Wood-plastic composite boards for concrete-form 建筑模板用木塑复合板 |
China National Standards site |
English PDF |
| GB/T 29060-2012 |
The bricks & blocks composited insulation materials 复合保温砖和复合保温砌块 |
China National Standards site |
English PDF |
| GB/T 29419-2012 |
Establishing performance ratings for wood-plastic composite deck boards and guardrail system performance 塑木复合材料铺板性能等级和护栏体系性能 |
China National Standards site |
English PDF |
| GB/T 29418-2012 |
Test methods for mechannical and physical properties of wood-plastic composite product 塑木复合材料产品物理力学性能测试 |
China National Standards site |
English PDF |
| GB/T 29407-2012 |
Technology specification for production of fire-retardant treated lumber and wood composite panel products 阻燃木材及阻燃人造板生产技术规范 |
China National Standards site |
English PDF |
| GB/T 29365-2012 |
Wood-Plastic Composite (WPC) - Test methods of artificial weathering 塑木复合材料 人工气候老化试验方法 |
China National Standards site |
English PDF |
| GB/T 29324-2012 |
Fiber reinforced polymer matrix composite core for overhead electrical conductors 架空导线用纤维增强树脂基复合材料芯棒 |
China National Standards site |
English PDF |
| GB/T 28986-2012 |
Specification for evaluation of structural composite lumber products 结构用木质复合材产品力学性能评定 |
China National Standards site |
English PDF |
| GB/T 2423.34-2012 |
Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature/humidity cyclic test 环境试验 第2部分：试验方法 试验Z/AD：温度/湿度组合循环试验 |
China National Standards site |
English PDF |
| GB/T 28891-2012 |
Fibre-reinforced plastic composites - Determination of mode Ⅰinterlaminar fracture toughness GⅠC for unidirectionally reinforced materials 纤维增强塑料复合材料 单向增强材料Ⅰ型层间断裂韧性GⅠC的测定 |
China National Standards site |
English PDF |
| GB/T 28889-2012 |
Test method for In-plane shear properties of composite materials 复合材料面内剪切性能试验方法 |
China National Standards site |
English PDF |
| GB/T 28904-2012 |
Steel strips for steel-aluminum composite 钢铝复合用钢带 |
China National Standards site |
English PDF |
| GB 28883-2012 |
Composite seamless steel tubes for pressure 承压用复合无缝钢管 |
China National Standards site |
English PDF |
| GB/T 3965-2012 |
Determination of diffusible hydrogen in deposited metal 熔敷金属中扩散氢测定方法 |
China National Standards site |
English PDF |
| GB/T 28871-2012 |
Critical current measurement-DC critical current of Nb3Sn composite superconductors 铌三锡（Nb3Sn）复合超导体的直流临界电流测量 |
China National Standards site |
English PDF |
| GB/T 50783-2012 |
Technical code for composite foundation 复合地基技术规范 |
China National Standards site |
English PDF |
| GB/T 28521-2012 |
Intelligent energy saving system by fresh air for telecommunication stations/sites 通信局站用智能新风节能系统 |
China National Standards site |
English PDF |
| GB/T 28520-2012 |
Intelligent heat exchanger for telecommunication stations/sites 通信局站用智能热交换系统 |
China National Standards site |
English PDF |
| GB/T 28294-2012 |
Steel slag composite material 钢渣复合料 |
China National Standards site |
English PDF |
| GB/T 28289-2012 |
Test methods for composite performances of aluminium alloy thermal barrier profiles 铝合金隔热型材复合性能试验方法 |
China National Standards site |
English PDF |
| GB 28053-2011 |
Composite cylinders for breathing apparatus 呼吸器用复合气瓶 |
China National Standards site |
English PDF |
| GB/T 27979-2011 |
Alumina ceramic wear-resistant composite lining board 氧化铝耐磨陶瓷复合衬板 |
China National Standards site |
English PDF |
| GB/T 27675-2011 |
Designation system for aluminium and aluminium alloys composite sheets, strips and foils 铝及铝合金复合板、带、箔材牌号表示方法 |
China National Standards site |
English PDF |
| GB/T 27792-2011 |
Classification for laminated composite gasket materials 层压复合垫片材料分类 |
China National Standards site |
English PDF |
| GB 12523-2011 |
Emisson standard of environment noise for boundary of construction site 建筑施工场界环境噪声排放标准 |
China National Standards site |
English PDF |
| GB/T 28104-2011 |
Detection and identification of Incisitermes minor (Hagen) 小楹白蚁检疫鉴定方法 |
China National Standards site |
English PDF |
| GB/T 26218.3-2011 |
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Composite insulators for a.c. systems 污秽条件下使用的高压绝缘子的选择和尺寸确定 第3部分：交流系统用复合绝缘子 |
China National Standards site |
English PDF |
| GB/T 27649-2011 |
Bamboo and wood laminated composite flooring 竹木复合层积地板 |
China National Standards site |
English PDF |
| GB/T 26978.5-2011 |
Design and manufacture of site built, vertical, cylindrical flat-bottomed steel tanks for the storage of liquefied nature gases - Part 5: Testing, drying, purging and cool-down 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第5部分：试验、干燥、置换及冷却 |
China National Standards site |
English PDF |
| GB/T 26978.4-2011 |
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of liquefied nature gases - Part 4: Insulation components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第4部分：绝热构件 |
China National Standards site |
English PDF |
| GB/T 26978.3-2011 |
Design and manufacture of site built, vertical, cylindrical,flat-bottomed steel tanks for the storage of liquefied nature gases - Part 3: Concrete components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第3部分：混凝土构件 |
China National Standards site |
English PDF |
| GB/T 26978.2-2011 |
Design and manufacture of site built, vertical, cylindrical flat-bottomed steel tanks for the storage of liquefied nature gases - Part 2: Metallic components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第2部分：金属构件 |
China National Standards site |
English PDF |
| GB/T 26978.1-2011 |
Design and manufacture of site built, vertical, cylindrical，flat-bottomed steel tanks for the storage of liquefied nature gases - Part 1: General 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第1部分：总则 |
China National Standards site |
English PDF |
| GB 50739-2011 |
Technical code for composite soil nailing wall in retaining and protection of excavation 复合土钉墙基坑支护技术规范 |
China National Standards site |
English PDF |
| GB/T 50315-2011 |
Technical standard for site testing of masonry engineering 砌体工程现场检测技术标准 |
China National Standards site |
English PDF |
| GB/T 26745-2011 |
Basalt fiber composites for strengthening and restoring structures 结构加固修复用玄武岩纤维复合材料 |
China National Standards site |
English PDF |
| GB/T 26743-2011 |
Fiber reinforced composite bars for civil engineering 结构工程用纤维增强复合材料筋 |
China National Standards site |
English PDF |
| GB/T 26652-2011 |
Abrasion-resistant composite materials castings 耐磨损复合材料铸件 |
China National Standards site |
English PDF |
| GB/T 8190.2-2011 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site 往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量 |
China National Standards site |
English PDF |
| GB 50720-2011 |
Technical code for fire safety of construction site 建设工程施工现场消防安全技术规范 |
China National Standards site |
English PDF |
| GB/T 26518-2011 |
Reinforced and composite polymeric sheets for water proof 高分子增强复合防水片材 |
China National Standards site |
English PDF |
| GB/T 26300-2010 |
Nickel cobalt manganese composite hydroxide 镍、钴、锰三元素复合氢氧化物 |
China National Standards site |
English PDF |
| GB/T 26360-2010 |
Tourism e-commerce website development technology criterion 旅游电子商务网站建设技术规范 |
China National Standards site |
English PDF |
| GB/T 25928-2010 |
Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) 过程工业自动化系统出厂验收测试（FAT）、现场验收测试（SAT）、现场综合测试（SIT）规范 |
China National Standards site |
English PDF |
| GB 25906.5-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 48 Dot matrix fonts - Part 5: Zouzhe Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第5部分：奏折体 |
China National Standards site |
English PDF |
| GB 25906.4-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 48 Dot matrix fonts - Part 4: Xingshu Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第4部分：行书体 |
China National Standards site |
English PDF |
| GB 25906.3-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 48 Dot matrix fonts - Part 3: Dahei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第3部分：大黑体 |
China National Standards site |
English PDF |
| GB 25906.2-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 48 Dot matrix fonts - Part 2: Zhenghei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第2部分：正黑体 |
China National Standards site |
English PDF |
| GB 25906.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 48 Dot matrix fonts - Part 1: Zhengbai Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 48点阵字型 第1部分：正白体 |
China National Standards site |
English PDF |
| GB 25905.2-2010 |
Information technology - universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 32 dot matrix fonts - Part 2: Zhenghei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 32点阵字型 第2部分：正黑体 |
China National Standards site |
English PDF |
| GB 25905.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 32 Dot matrix fonts - Part 1: Zhengbai Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 32点阵字型 第1部分：正白体 |
China National Standards site |
English PDF |
| GB 25904.3-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 24 Dot matrix fonts - Part 3: Zouzhe Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第3部分：奏折体 |
China National Standards site |
English PDF |
| GB 25904.2-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 24 Dot matrix fonts - Part 2: Xingshu Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第2部分：行书体 |
China National Standards site |
English PDF |
| GB 25904.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 24 Dot matrix fonts - Part 1: Dahei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第1部分：大黑体 |
China National Standards site |
English PDF |
| GB 25903.2-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 16 Dot matrix fonts - Part 2: Zhenghei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 16点阵字型 第2部分：正黑体 |
China National Standards site |
English PDF |
| GB 25903.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 16 Dot matrix fonts - Part 1: Zhengbai Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 16点阵字型 第1部分：正白体 |
China National Standards site |
English PDF |
| GB/T 26106-2010 |
Mechanically deposited coatings of zinc - Specification and test methods 机械镀锌层 技术规范和试验方法 |
China National Standards site |
English PDF |
| GB/T 26061-2010 |
Tantalum-niobium composite carbides 钽铌复合碳化物 |
China National Standards site |
English PDF |
| GB/T 26029-2010 |
Nickel cobalt manganese composite oxide 镍、钴、锰三元素复合氧化物 |
China National Standards site |
English PDF |
| GB/T 25897-2010 |
Superconductivity: Residual resistance ratio measurement of Nb-Ti composite superconductors 超导电性：铌-酞复合超导体剩余电阻比测定 |
China National Standards site |
English PDF |
| GB/T 25777-2010 |
Preparation methods for deposited metal specimens of chemical analysis 焊接材料熔敷金属化学分析试样制备方法 |
China National Standards site |
English PDF |
| GB/T 25774.1-2010 |
Test methods for welding consumables - Part 1: Preparation and testing of deposited metal specimens for mechanical properties in steel,nickel and nickel alloys 焊接材料的检验 第1部分：钢、镍及镍合金熔敷金属力学性能试样的制备及检验 |
China National Standards site |
English PDF |
| GB 25527-2010 |
Mine site mixed and charged explosive trucks - Safety requirements 矿用混装炸药车 安全要求 |
China National Standards site |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
