Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 28636-2012 |
Heating and air conditioning system hydraulic balance valve 采暖与空调系统水力平衡阀 |
China National Standards valve |
 English PDF |
| GB/T 28572-2012 |
Series of large and medium inletvalves of hydraulic turbine 大中型水轮机进水阀门系列 |
China National Standards valve |
English PDF |
| GB/T 28563-2012 |
Electrical testing of thyristor valves for ±800kV ultra high voltage direct current (UHVDC) power transmission ±800kV特高压直流输电用晶闸管阀电气试验 |
China National Standards valve |
English PDF |
| GB/T 28494-2012 |
Globe valves of thermoplastics materials 热塑性塑料截止阀 |
China National Standards valve |
English PDF |
| GB/T 14478-2012 |
Fundamental technical requirements for large and medium inlet valves of hydraulic turbine 大中型水轮机进水阀门基本技术条件 |
China National Standards valve |
English PDF |
| GB/T 50775-2012 |
Code for construction and acceptance of converter valve in converter station at ±800KV and below ±800KV及以下换流站换流阀施工及验收规范 |
China National Standards valve |
English PDF |
| GB 28379-2012 |
Minimum allowable values of water efficiency and water efficiency grades for flush valve for water closets 便器冲洗阀用水效率限定值及用水效率等级 |
China National Standards valve |
English PDF |
| GB/T 28270-2012 |
Intelligent valve electric actuator 智能型阀门电动装置 |
China National Standards valve |
English PDF |
| GB/T 8243.9-2012 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests 内燃机全流式机油滤清器试验方法 第9部分：进、出口止回阀试验 |
China National Standards valve |
English PDF |
| GB/T 28259-2012 |
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment 石油天然气工业 井下设备 井下安全阀 |
China National Standards valve |
English PDF |
| GB 15383-2011 |
Connection types and dimensions for gas cylinder valve outlets 气瓶阀出气口连接型式和尺寸 |
China National Standards valve |
English PDF |
| GB/T 27734-2011 |
Polypropylene（PP）valves for pipes under pressure - Basic dimensions - Metric series 压力管道用聚丙烯（PP）阀门 基本尺寸 公制系列 |
China National Standards valve |
English PDF |
| GB/T 27726-2011 |
Thermoplastics valves - Pressure test methods and requirements 热塑性塑料阀门压力试验方法及要求 |
China National Standards valve |
English PDF |
| GB/T 27725-2011 |
Butterfly valves of thermoplastics materials 热塑性塑料蝶阀 |
China National Standards valve |
English PDF |
| GB/T 10002.3-2011 |
valves made of unplasticized poly(vinyl chloride)(PVC-U)for water supply 给水用硬聚氯乙烯（PVC-U）阀门 |
China National Standards valve |
English PDF |
| GB/T 25753.3-2011 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 3: Measurement of overflow valve differential pressure 真空技术 罗茨真空泵性能测量方法 第3部分：溢流阀压差的测量 |
China National Standards valve |
English PDF |
| GB 5135.17-2011 |
Automatic sprinkler system - Part 17：Pressure reducing valves 自动喷水灭火系统 第17部分：减压阀 |
China National Standards valve |
English PDF |
| GB 26640-2011 |
Specification for minimal thickness of the shell of valves 阀门壳体最小壁厚尺寸要求规范 |
China National Standards valve |
English PDF |
| GB/T 26715-2011 |
Biogas valve 沼气阀 |
China National Standards valve |
English PDF |
| GB/T 26482-2011 |
Fire type-testing requirement for check valves 止回阀 耐火试验 |
China National Standards valve |
English PDF |
| GB/T 26481-2011 |
valve test for fugitive emissions 阀门的逸散性试验 |
China National Standards valve |
English PDF |
| GB/T 26480-2011 |
valve inspection and testing 阀门的检验和试验 |
China National Standards valve |
English PDF |
| GB/T 26479-2011 |
Fire test for soft-seated quarter-turn valves 弹性密封部分回转阀门 耐火试验 |
China National Standards valve |
English PDF |
| GB/T 26478-2011 |
Globe valves for ammonia and lift check valves 氨用截止阀和升降式止回阀 |
China National Standards valve |
English PDF |
| GB/T 18691.5-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 5: Control valves 农业灌溉设备 灌溉阀 第5部分：控制阀 |
China National Standards valve |
English PDF |
| GB/T 18691.4-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 4: Air valves 农业灌溉设备 灌溉阀 第4部分：进排气阀 |
China National Standards valve |
English PDF |
| GB/T 18691.3-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 3: Check valves 农业灌溉设备 灌溉阀 第3部分：止回阀 |
China National Standards valve |
English PDF |
| GB/T 18691.2-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 2: Isolating valves 农业灌溉设备 灌溉阀 第2部分：隔离阀 |
China National Standards valve |
English PDF |
| GB/T 18691.1-2011 |
Agricultural irrigation equipment - Irrigation valves - Part 1: General requirements 农业灌溉设备 灌溉阀 第1部分：通用要求 |
China National Standards valve |
English PDF |
| GB/T 26147-2010 |
Specification for ball of ball valve 球阀球体 技术条件 |
China National Standards valve |
English PDF |
| GB/T 26146-2010 |
Eccentric stmi-ball valve 偏心半球阀 |
China National Standards valve |
English PDF |
| GB/T 26145-2010 |
Drain valve 排污阀 |
China National Standards valve |
English PDF |
| GB/T 26144-2010 |
Liner fluoroplatics for flanged ang wafer steel butterfly valve 法兰和对夹连接钢制衬氟塑料蝶阀 |
China National Standards valve |
English PDF |
| GB/T 26142.2-2010 |
Pneumatic fluid power - Five-port directional control valves,sizes 18mm and 26mm - Part 2: Mounting interface surfaces with optional electrical connector 气动五通方向控制阀 规格18mm和26mm 第2部分:带可选电气接头的安装面 |
China National Standards valve |
English PDF |
| GB/T 26142.1-2010 |
Pneumatic fluid power - Five-port directional control valves,sizes 18mm and 26mm - Part 1: Mounting interface surfaces without electrical connector 气动五通方向控制阀 规格18mm和26mm 第1部分：不带电气接头的安装面 |
China National Standards valve |
English PDF |
| GB/T 17213.17-2010 |
Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery 工业过程控制阀 第2-5部分：流通能力 流体流经级间恢复多级控制阀的计算公式 |
China National Standards valve |
English PDF |
| GB/T 26024-2010 |
Seamless copper and copper alloys tube for valves on air-conditioning and refrigeration system 空调与制冷系统阀件用铜及铜合金无缝管 |
China National Standards valve |
English PDF |
| GB 25974.3-2010 |
Powered support for coal mine - Part 3：The hydraulic control system and valves 煤矿用液压支架 第3部分：液压控制系统及阀 |
China National Standards valve |
English PDF |
| GB/T 25754-2010 |
Vacuum technology - Right-angle valve - Dimensions and interfaces for pneumatic actuator 真空技术 直角阀 尺寸和气动装置的接口 |
China National Standards valve |
English PDF |
| GB/T 25739-2010 |
Technical guideline of valves commissioning for nuclear power plant 核电厂阀门调试技术导则 |
China National Standards valve |
English PDF |
| GB 22380.3-2010 |
Explosion protected safety technique of the petrol filling station - Part 3: Safety requirements for construction and performance of shear valves 燃油加油站防爆安全技术 第3部分：剪切阀结构和性能的安全要求 |
China National Standards valve |
English PDF |
| GB/T 5771-2010 |
Delivery valve of diesel fuel injection pump - Specifications 柴油机喷油泵出油阀偶件 技术条件 |
China National Standards valve |
English PDF |
| GB/T 25429-2010 |
Specification for drill string non-return valve 钻具止回阀规范 |
China National Standards valve |
English PDF |
| GB/T 25126-2010 |
Large capacity cross-electromagnetic four-way reversing valve 大容量交叉式电磁四通换向阀 |
China National Standards valve |
English PDF |
| GB/T 24925-2010 |
Cryogenic valve technical specifications 低温阀门 技术条件 |
China National Standards valve |
English PDF |
| GB/T 24924-2010 |
Resilient-seated gate valves for water supply service 供水系统用弹性密封闸阀 |
China National Standards valve |
English PDF |
| GB/T 24923-2010 |
Technical specifications of basic version electric valve actuators 普通型阀门电动装置技术条件 |
China National Standards valve |
English PDF |
| GB/T 24922-2010 |
Technical specifications of explosion-proof version electric valve actuators 隔爆型阀门电动装置技术条件 |
China National Standards valve |
English PDF |
| GB/T 24921.2-2010 |
Sizing,selection,and installation of pressure relieving valves for petrochemical industries - Part 2: Installation 石化工业用压力释放阀的尺寸确定、选型和安装 第2部分：安装 |
China National Standards valve |
English PDF |
| GB/T 24921.1-2010 |
Sizing,selection and installation of pressure reliev valves for petrochemical industries - Part 1: Sizing and selection 石化工业用压力释放阀的尺寸确定、选型和安装 第1部分：尺寸的确定和选型 |
China National Standards valve |
English PDF |
| GB/T 24920-2010 |
Steel pressure relirf valves for petrochemical industries 石化工业用钢制压力释放阀 |
China National Standards valve |
English PDF |
| GB/T 24919-2010 |
Installation, operation, maintenance of industrial valves - General requirements 工业阀门 安装使用维护 一般要求 |
China National Standards valve |
English PDF |
| GB/T 24918-2010 |
Cryogenic emergency shutoff valve 低温介质用紧急切断阀 |
China National Standards valve |
English PDF |
| GB/T 24917-2010 |
Glasses valve 眼镜阀 |
China National Standards valve |
English PDF |
| GB/T 14087-2010 |
Safety valves for marine air vessel 船用空气瓶安全阀 |
China National Standards valve |
English PDF |
| GB 9765-2009 |
Tyre valve threads 轮胎气门嘴螺纹 |
China National Standards valve |
English PDF |
| GB 9764-2009 |
Tyre valve-core chambers 轮胎气门嘴芯腔 |
China National Standards valve |
English PDF |
| GB 1796.7-2009 |
Tyre valves - Part 7:Components 轮胎气门嘴 第7部分：零部件 |
China National Standards valve |
English PDF |
| GB 1796.5-2009 |
Tyre valves - Part 5: Tyre valves for large core chamber 轮胎气门嘴 第5部分：大芯腔气门嘴 |
China National Standards valve |
English PDF |
| GB 1796.4-2009 |
Tyre valves - Part 4: Clamp-in valves 轮胎气门嘴 第4部分：压紧式无内胎气门嘴 |
China National Standards valve |
English PDF |
| GB/T 9766.7-2009 |
Test method for tyre valves - Part 7: Components test methods 轮胎气门嘴试验方法 第7部分：零部件试验方法 |
China National Standards valve |
English PDF |
| GB/T 9766.5-2009 |
Test method for tyre valve - Part 5: Tyre valves for large core chamber test methods 轮胎气门嘴试验方法 第5部分：大芯腔气门嘴试验方法 |
China National Standards valve |
English PDF |
| GB/T 9766.4-2009 |
Test method for tyre valve - Part 4: Clamp-in tubeless valves test methods 轮胎气门嘴试验方法 第4部分：压紧式无内胎气门嘴试验方法 |
China National Standards valve |
English PDF |
| GB/T 18689-2009 |
Agricultural irrigation equipment－ Manually operated small plastics valves 农业灌溉设备 小型手动塑料阀 |
China National Standards valve |
English PDF |
| GB/T 24649.4-2009 |
Brake valve of pneumatic braking system of tractor-trailers - Specifications 拖拉机挂车气制动系统气制动阀 技术条件 |
China National Standards valve |
English PDF |
| GB 17926-2009 |
Compressed natural gas cylinder valve for vehicle 车用压缩天然气瓶阀 |
China National Standards valve |
English PDF |
| GB 17878-2009 |
Cylinder valve for non-refillable steel welded industry cylinder 工业用非重复充装焊接钢瓶用瓶阀 |
China National Standards valve |
English PDF |
| GB 15382-2009 |
General specifications of gas cylinder valves 气瓶阀通用技术要求 |
China National Standards valve |
English PDF |
| GB 10879-2009 |
valves for dissolved acetylene cylinders 溶解乙炔气瓶阀 |
China National Standards valve |
English PDF |
| GB/T 588-2009 |
Marine bronze flanged stop check valves 船用法兰青铜截止止回阀 |
China National Standards valve |
English PDF |
| GB/T 23337-2009 |
Internal combustion engines - Intake and exhaust valves - Specification 内燃机 进、排气门 技术条件 |
China National Standards valve |
English PDF |
| GB/T 23300-2009 |
Parallel plane disc gate valves 平板闸阀 |
China National Standards valve |
English PDF |
| GB/T 13852-2009 |
General specification of hydraulic control valves for ship 船用液压控制阀技术条件 |
China National Standards valve |
English PDF |
| GB 12279-2008 |
Cardiovasular implants - Cardiac valve prostheses 心血管植入物 人工心脏瓣膜 |
China National Standards valve |
English PDF |
| GB 14536.21-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated oil valves, including mechanical requirements 家用和类似用途电自动控制器 电动油阀的特殊要求, 包括机械要求 |
China National Standards valve |
English PDF |
| GB/T 8464-2008 |
Cast iron and copper valves with screwed connections 铁制和铜制螺纹连接阀门 |
China National Standards valve |
English PDF |
| GB/T 22653-2008 |
Emergency shutoff valve for LG equipment 液化气体设备用紧急切断阀 |
China National Standards valve |
English PDF |
| GB/T 22652-2008 |
Overlaying-welding procedure qualification for valves sealing face 阀门密封面堆焊工艺评定 |
China National Standards valve |
English PDF |
| GB/T 13927-2008 |
Industrial valves - Pressure testing 工业阀门 压力试验 |
China National Standards valve |
English PDF |
| GB/T 12239-2008 |
Industrial valves - Diaphragm valves made of metallic materials 工业阀门 金属隔膜阀 |
China National Standards valve |
English PDF |
| GB/T 12238-2008 |
Flanged and wafer resilient seal butterfly valves 法兰和对夹连接弹性密封蝶阀 |
China National Standards valve |
English PDF |
| GB 15558.3-2008 |
Buried polyethylene（PE）piping systems for the supply of gaseous fuels - Part 3: valves 燃气用埋地聚乙烯(PE)管道系统 第3部分：阀门 |
China National Standards valve |
English PDF |
| GB/T 596-2008 |
Marine bronze male thread stop-check valves 船用外螺纹青铜截止止回阀 |
China National Standards valve |
English PDF |
| GB/T 587-2008 |
Marine bronze flanged stop valves 船用法兰青铜截止阀 |
China National Standards valve |
English PDF |
| GB/T 584-2008 |
Marine cast steel flanged stop valves 船用法兰铸钢截止阀 |
China National Standards valve |
English PDF |
| GB/T 1951-2008 |
Marine low pressure bronze male threaded stop valves 船用低压外螺纹青铜截止阀 |
China National Standards valve |
English PDF |
| GB 14536.9-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated water valves, including mechanical requirements 家用和类似用途电自动控制器 电动水阀的特殊要求(包括机械要求) |
China National Standards valve |
English PDF |
| GB 1796.6-2008 |
Tyre valves - Part 6: Cores 轮胎气门嘴 第6部分：气门芯 |
China National Standards valve |
English PDF |
| GB 1796.3-2008 |
Tyre valves - Part 3: Snap-in valves 轮胎气门嘴 第3部分：卡扣式气门嘴 |
China National Standards valve |
English PDF |
| GB 1796.2-2008 |
Tyre valves - Part 2: Rubber base valves 轮胎气门嘴 第2部分：胶座气门嘴 |
China National Standards valve |
English PDF |
| GB 1796.1-2008 |
Tyre valves - Part 1: Clamp-in valves 轮胎气门嘴 第1部分：压紧式内胎气门嘴 |
China National Standards valve |
English PDF |
| GB/T 9766.6-2008 |
Test method for tyre valve - Part 6: Test method for core 轮胎气门嘴试验方法 第6部分：气门芯试验方法 |
China National Standards valve |
English PDF |
| GB/T 22342-2008 |
Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress 石油天然气工业 井下安全阀系统 设计、安装、操作和维护 |
China National Standards valve |
English PDF |
| GB/T 591-2008 |
Marine cast iron flanged stop check valves 船用法兰铸铁截止止回阀 |
China National Standards valve |
English PDF |
| GB/T 590-2008 |
Marine cast iron flanged stop valves 船用法兰铸铁截止阀 |
China National Standards valve |
English PDF |
| GB/T 585-2008 |
Marine cast steel flanged stop check valves 船用法兰铸钢截止止回阀 |
China National Standards valve |
English PDF |
| GB/T 2030-2008 |
Bronze suction valve for seaward sluice 青铜吸入通海阀 |
China National Standards valve |
English PDF |
| GB/T 2029-2008 |
Cast steel suction valve for seaward sluice 铸钢吸入通海阀 |
China National Standards valve |
English PDF |
| GB/T 1953-2008 |
Marine low pressure bronze male threaded stop check valves 船用低压外螺纹青铜截止止回阀 |
China National Standards valve |
English PDF |
| GB/T 1852-2008 |
Marine cast steel flanged steam pressure reducing valves 船用法兰铸钢蒸汽减压阀 |
China National Standards valve |
English PDF |
| GB/T 1850-2008 |
Marine male threaded weight quick-closing valves 船用外螺纹重块式快关阀 |
China National Standards valve |
English PDF |
| GB/T 600-2008 |
General specifications for marine piping valves and fittings 船舶管路阀件通用技术条件 |
China National Standards valve |
English PDF |
| GB/T 595-2008 |
Marine bronze male thread stop valves 船用外螺纹青铜截止阀 |
China National Standards valve |
English PDF |
| GB/T 11698-2008 |
Metal valves for use in marine flanged pipe systems - Face-to-face and center-to-face dimensions 船用法兰连接金属阀门的结构长度 |
China National Standards valve |
English PDF |
| GB/T 4213-2008 |
Pneumatic industrial process control valves 气动调节阀 |
China National Standards valve |
English PDF |
| GB/T 22137.2-2008 |
valve positiongers for use in industrial-process control system - Part 2: Methods of evaluating the performance of intelligent value positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第2部分：气动输出智能阀门定位器性能评定方法 |
China National Standards valve |
English PDF |
| GB/T 22137.1-2008 |
valve positiongers for use in industrial-process control system - Part 1: Methods of evaluating the performance of valve positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第1部分：气动输出阀门定位器性能评定方法 |
China National Standards valve |
English PDF |
| GB/T 17213.5-2008 |
Industrial-process control valves - Part 5: Marking 工业过程控制阀 第5部分: 标志 |
China National Standards valve |
English PDF |
| GB/T 6567.5-2008 |
Technical drawings - Graphical symbols for piping systems - Axonometric representation of graphical symbols for piping, piping accessories and valves etc. 技术制图 管路系统的图形符号 管路、管件和阀门等图形符号的轴测图画法 |
China National Standards valve |
English PDF |
| GB/T 6567.4-2008 |
Technical drawings - Graphical symbols for piping systems - valves and control components 技术制图 管路系统的图形符号 阀门和控制元件 |
China National Standards valve |
English PDF |
| GB/T 7940.2-2008 |
Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector 气动 五气口方向控制阀 第2部分：带可选电气接头的安装面 |
China National Standards valve |
English PDF |
| GB/T 7940.1-2008 |
Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector 气动 五气口方向控制阀 第1部分：不带电气接头的安装面 |
China National Standards valve |
English PDF |
| GB/T 22130-2008 |
steel plug valves 钢制旋塞阀 |
China National Standards valve |
English PDF |
| GB/T 22107-2008 |
Pneumatic fluid power - Directional control valves - Measurement of shifting time 气动方向控制阀 切换时间的测量 |
China National Standards valve |
English PDF |
| GB/T 12240-2008 |
Iron plug valves 铁制旋塞阀 |
China National Standards valve |
English PDF |
| GB/T 9766.3-2008 |
Test method for tyre valve - Part 3: Snap-in valves - Test methods 轮胎气门嘴试验方法 第3部分：卡扣式气门嘴试验方法 |
China National Standards valve |
English PDF |
| GB/T 9766.2-2008 |
Test method for tyre valve - Part 2: Rubber base valves test methods 轮胎气门嘴试验方法 第2部分：胶座气门嘴试验方法 |
China National Standards valve |
English PDF |
| GB/T 9766.1-2008 |
Test method for tyre valves - Part 1: Test method for clamp-in valves 轮胎气门嘴试验方法 第1部分：压紧式内胎气门嘴试验方法 |
China National Standards valve |
English PDF |
| GB/T 12773-2008 |
valve steel and superalloy bars for internal combustion engines 内燃机气阀用钢及合金棒材 |
China National Standards valve |
English PDF |
| GB/T 13854-2008 |
Jet-pipe electro-hydraulic servo valve 射流管电液伺服阀 |
China National Standards valve |
English PDF |
| GB/T 2514-2008 |
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces 液压传动 四油口方向控制阀安装面 |
China National Standards valve |
English PDF |
| GB/T 21465-2008 |
Terminology for valves 阀门 术语 |
China National Standards valve |
English PDF |
| GB/T 594-2008 |
Marine forged steel male thread stop valves 船用外螺纹锻钢截止阀 |
China National Standards valve |
English PDF |
| GB/T 5744-2008 |
Marine quick-closing valves 船用快关阀 |
China National Standards valve |
English PDF |
| GB/T 1853-2008 |
Marine flanged cast steel overboard stop check valve 船用法兰铸钢舷侧截止止回阀 |
China National Standards valve |
English PDF |
| GB/T 1241-2008 |
Marine forged steel male thread stop-check valves 船用外螺纹锻钢截止止回阀 |
China National Standards valve |
English PDF |
| GB/T 21387-2008 |
Aaxial flow check valve 轴流式止回阀 |
China National Standards valve |
English PDF |
| GB/T 21385-2008 |
Metal-seated ball valve 金属密封球阀 |
China National Standards valve |
English PDF |
| GB/T 21384-2008 |
Electric water-heater safety valve 电热水器用安全阀 |
China National Standards valve |
English PDF |
| GB/T 12236-2008 |
Steel swing check valve for petroleum, petrochemical and allied industries 石油、化工及相关工业用的钢制旋启式止回阀 |
China National Standards valve |
English PDF |
| GB/T 10869-2008 |
Control valves for power station 电站调节阀 |
China National Standards valve |
English PDF |
| GB/T 21285-2007 |
Tubes valves - Identification system for valves and their components 轮胎气门嘴及其零部件的标识方法 |
China National Standards valve |
English PDF |
| GB/T 21229-2007 |
Acoustics - Determination of sound power levels of noise from air-terminal devices,air-terminal units,dampers and valves by measurement in a reverberation room 声学 风道末端装置、末端单元、风道闸门和阀噪声声功率级的混响室测定 |
China National Standards valve |
English PDF |
| GB/T 20995-2007 |
Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators 输配电系统的电力电子技术 静止无功补偿装置用晶闸管阀的试验 |
China National Standards valve |
English PDF |
| GB/T 20990.1-2007 |
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing 高压直流输电晶闸管阀 第1部分：电气试验 |
China National Standards valve |
English PDF |
| GB/T 2877-2007 |
Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities 液压二通盖板式插装阀 安装连接尺寸 |
China National Standards valve |
English PDF |
| GB/T 20910-2007 |
Temperature/pressure safety valve for hot water supply system 热水系统用温度压力安全阀 |
China National Standards valve |
English PDF |
| GB/T 12237-2007 |
Steel ball valves for petroleum, petrochemical and allied industries 石油、石化及相关工业用的钢制球阀 |
China National Standards valve |
English PDF |
| GB/T 12235-2007 |
Steel globe valves and lift check valve for petroleum, petrochemical and allied industries 石油、石化及相关工业用钢制截止阀和升降式止回阀 |
China National Standards valve |
English PDF |
| GB/T 12234-2007 |
Bolted bonnet steel gate valves for petroleum and natural gas industries 石油、天然气工业用螺柱连接阀盖的钢制闸阀 |
China National Standards valve |
English PDF |
| GB/T 10844-2007 |
General specification of electro-hydraulic servo valves for ship 船用电液伺服阀通用技术条件 |
China National Standards valve |
English PDF |
| GB/T 12246-2006 |
Pilot operated pressure reducing valves 先导式减压阀 |
China National Standards valve |
English PDF |
| GB/T 12245-2006 |
Methods of performance test for pressure reducing valves 减压阀 性能试验方法 |
China National Standards valve |
English PDF |
| GB/T 12244-2006 |
General requirements for pressure reducing valves 减压阀 一般要求 |
China National Standards valve |
English PDF |
| GB/T 12233-2006 |
General purpose industrial valves - Casting iron globe valves and lift check valves 通用阀门 铁制截止阀与升降式止回阀 |
China National Standards valve |
English PDF |
| GB/T 12228-2006 |
General purpose industrial valves - Specification of carbon steel forgings 通用阀门 碳素钢锻件技术条件 |
China National Standards valve |
English PDF |
| GB 14536.19-2006 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated gas valves, including mechanical requirements 家用和类似用途电自动控制器 电动燃气阀的特殊要求，包括机械要求 |
China National Standards valve |
English PDF |
| GB/T 8100-2006 |
Hydraulic fluid power―Pressure-reducing valves,sequence valves,unloading valves,throttle valves and check valves―Mounting surfaces 液压传动 减压阀、顺序阀、卸荷阀、节流阀和单向阀 安装面 |
China National Standards valve |
English PDF |
| GB 7512-2006 |
valves for liquefied petroleum gas cylinders 液化石油气瓶阀 |
China National Standards valve |
English PDF |
| GB/T 20063.8-2006 |
Graphical symbols for diagrams -Part 8: valves and dampers 简图用图形符号 第8部分：阀与阻尼器 |
China National Standards valve |
English PDF |
| GB/T 12225-2005 |
General purpose industrial valves-Specification of copper alloy castings 通用阀门 铜合金铸件技术条件 |
China National Standards valve |
English PDF |
| GB/T 12224-2005 |
General requirements for industrial steel valves 钢制阀门 一般要求 |
China National Standards valve |
English PDF |
| GB/T 10868-2005 |
Steam converting valve for power stations 电站减温减压阀 |
China National Standards valve |
English PDF |
| GB/T 17213.9-2005 |
Industrial-process control valves Part 2-3:Flow capacity-Test procedures 工业过程控制阀 第2-3部分：流通能力 试验程序 |
China National Standards valve |
English PDF |
| GB/T 17213.6-2005 |
Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分：定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards valve |
English PDF |
| GB/T 17213.4-2005 |
Industrial-process control valves Part 4:Inspection and routine testing 工业过程控制阀 第4部分：检验和例行试验 |
China National Standards valve |
English PDF |
| GB/T 17213.3-2005 |
Industrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves 工业过程控制阀 第3-1部分：尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距 |
China National Standards valve |
English PDF |
| GB/T 17213.2-2005 |
Industrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分：流通能力 安装条件下流体流量的计算公式 |
China National Standards valve |
English PDF |
| GB/T 17213.16-2005 |
Industrial-process control valves Part 8-4:Noise considerations-Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分：噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards valve |
English PDF |
| GB/T 17213.15-2005 |
Industrial-process control valves Part 8-3:Noise considerations-Control valve aerodynamic noise prediction method 工业过程控制阀 第8-3部分：噪声的考虑 空气动力流流经控制阀产生的噪声预测方法 |
China National Standards valve |
English PDF |
| GB/T 17213.14-2005 |
Industrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分：噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声 |
China National Standards valve |
English PDF |
| GB/T 17213.13-2005 |
Industrial-process control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotary actuators 工业过程控制阀 第6-2部分：定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装 |
China National Standards valve |
English PDF |
| GB/T 17213.12-2005 |
Industrial-process control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves 工业过程控制阀 第3-3部分：尺寸 对焊式两通球形直通控制阀的端距 |
China National Standards valve |
English PDF |
| GB/T 17213.11-2005 |
Industrial-process control valves Part 3-2:Dimensions-Face-to-face dimensions for rotary control valves except butterfly valves 工业过程控制阀 第3-2部分：尺寸 角行程控制阀(蝶阀除外)的端面距 |
China National Standards valve |
English PDF |
| GB/T 17213.10-2005 |
Industrial-process control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分：流通能力 固有流量特性和可调比 |
China National Standards valve |
English PDF |
| GB/T 14043-2005 |
Hydraulic fluid power-Code for identification of valve mounting surfaces and cartridge valve cavities 液压传动 阀安装面和插装阀阀孔的标识代号 |
China National Standards valve |
English PDF |
| GB/T 12232-2005 |
General purpose industrial valves Flanged iron gate valves 通用阀门 法兰连接铁制闸阀 |
China National Standards valve |
English PDF |
| GB/T 12230-2005 |
General purpose industrial valves-Specification of stainless steel castings 通用阀门 不锈钢铸件技术条件 |
China National Standards valve |
English PDF |
| GB/T 12229-2005 |
General Purpose industrial valves-Specification of carbon steel castings 通用阀门 碳素钢铸件技术条件 |
China National Standards valve |
English PDF |
| GB/T 12227-2005 |
General purpose industrial valve-Specification of spheroidal graphite iron castings 通用阀门 球墨铸铁件技术条件 |
China National Standards valve |
English PDF |
| GB/T 12226-2005 |
General purpose industrial valve-Specification of flake graphite iron castings 通用阀门 灰铸铁件技术条件 |
China National Standards valve |
English PDF |
| GB/T 19672-2005 |
Specification of pipeline valves 管线阀门 技术条件 |
China National Standards valve |
English PDF |
| GB/T 12243-2005 |
Spring loaded safety valves 弹簧直接载荷式安全阀 |
China National Standards valve |
English PDF |
| GB/T 12241-2005 |
Safety valves-General Requirements 安全阀一般要求 |
China National Standards valve |
English PDF |
| GB/T 12223-2005 |
Part-turn valve actuator attachments 部分回转阀门驱动装置的连接 |
China National Standards valve |
English PDF |
| GB/T 12222-2005 |
Multi-turn valve actuator attachments 多回转阀门驱动装置的连接 |
China National Standards valve |
English PDF |
| GB/T 12221-2005 |
Metal valves-Face to face,end to end,center to face and center to end dimensions 金属阀门 结构长度 |
China National Standards valve |
English PDF |
| GB/T 15623.2-2003 |
Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 2:Test methods for three-way directional flow control valves 液压传动 电调制液压控制阀 第2部分:三通方向流量控制阀试验方法 |
China National Standards valve |
English PDF |
| GB/T 15623.1-2003 |
Hydraulic fluid power--Electrically modulated hydraulic control valves--Part 1:Test methods for four-way directional flow control valves 液压传动 电调制液压控制阀 第1部分:四通方向流量控制阀试验方法 |
China National Standards valve |
English PDF |
| GB 5135.6-2003 |
Automatic sprinkler system--Part 6: Convention valve 自动喷水灭火系统 第6部分: 通用阀门 |
China National Standards valve |
English PDF |
| GB 5135.5-2003 |
Automatic sprinkler system--Part5: Deluge alarm valves 自动喷水灭火系统 第5部分: 雨淋报警阀 |
China National Standards valve |
English PDF |
| GB 5135.4-2003 |
Automatic sprinkler system--Part4: Dry pipe valves 自动喷水灭火系统 第4部分: 干式报警阀 |
China National Standards valve |
English PDF |
| GB 5135.2-2003 |
Automatic sprinkler system--Part 2:Wet system alarm valves，retard chamber，water motor alarm 自动喷水灭火系统 第2部分: 湿式报警阀、延迟器、水力警铃 |
China National Standards valve |
English PDF |
| GB/T 19278-2003 |
General terms and their definitions of thermoplastic pipes，fittings and valves 热塑性塑料管材、管件及阀门通用术语及其定义 |
China National Standards valve |
English PDF |
| GB/T 19230.6-2003 |
Test method for evaluating gasoline detergent in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method) 评价汽油清净剂使用效果的试验方法 第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(M111法) |
China National Standards valve |
English PDF |
| GB/T 19230.5-2003 |
Test method for evaluating gasoline detergent in use--Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(Ford 2.3L method) 评价汽油清净剂使用效果的试验方法 第5部分: 汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(Ford 2.3L方法) |
China National Standards valve |
English PDF |
| GB/T 8098-2003 |
Hydraulic fluid power--Compensated flow control valves--Mounting surfaces 液压传动 带补偿的流量控制阀 安装面 |
China National Standards valve |
English PDF |
| GB/T 8243.2-2003 |
Methods of test for full-flow lubricating oil filters for internal combustion engines--Part 2: Element by-pass valve characteristics 内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性 |
China National Standards valve |
English PDF |
| GB/T 8101-2002 |
Hydraulic fluid power--Pressure-relief valves--Mounting surfaces 液压溢流阀 安装面 |
China National Standards valve |
English PDF |
| GB/T 7940.3-2001 |
Pneumatic fluid power--Five-port directional control valves--Part 3:Code system for communication of valve functions 气动 五气口方向控制阀 第3部分:功能识别编码体系 |
China National Standards valve |
English PDF |
| GB 18299-2001 |
Automotive LPG steel cylinder multivalve 机动车用液化石油气钢瓶集成阀 |
China National Standards valve |
English PDF |
| GB/T 17490-1998 |
Hydraulic fluid power--Identification of valve ports，subplates，control devices and solenoids 液压控制阀 油口、底板、控制装置和电磁铁的标识 |
China National Standards valve |
English PDF |
| GB/T 17487-1998 |
Hydraulic fluid power--Four-and five-port servovalves--Mounting surfaces 四油口和五油口液压伺服阀 安装面 |
China National Standards valve |
English PDF |
| GB/T 17213.8-1998 |
Industrial-process control valves--Part 8:Noise considerations--Section 1:Laboratory measurement of noise generated by aerodynamic flow through control valves 工业过程控制阀 第8部分:噪声的考虑 第1节:实验室内测量空气动力流流经控制阀产生的噪声 |
China National Standards valve |
English PDF |
| GB/T 17213.7-1998 |
Industrial-process control valves--Part 7:Control valve data sheet 工业过程控制阀 第7部分:控制阀数据单 |
China National Standards valve |
English PDF |
| GB/T 17213.1-1998 |
Industrial-process control valves--Part 1:Control valve terminology and general considerations 工业过程控制阀 第1部分:控制阀术语和总则 |
China National Standards valve |
English PDF |
| GB/T 16859-1997 |
Terminal marking for valve device stacks and assemblies and for power convertor equipment 阀器件堆、装置和电力变流设备的端子标记 |
China National Standards valve |
English PDF |
| GB/T 726-1994 |
Reciprocating internal combustion engines--Designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in line engines and locations on an engine 往复式内燃机 旋转方向、气缸和气缸盖上气门的标志及直列式内燃机右机、左机和发动机方位的定义 |
China National Standards valve |
English PDF |
| GB/T 15185-1994 |
Cast iron and copper alloy ball valves 铁制和铜制球阀 |
China National Standards valve |
English PDF |
| GB/T 3037-1994 |
Marine duo-eccentric-pivoted butterfly valves 船用双偏心型蝶阀 |
China National Standards valve |
English PDF |
| Find out:411Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
