Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 17645.102-2008 |
Industrial automation systems and integration - Parts library - Part 102: View exchange protocol by ISO 10303 conforming specification 工业自动化系统与集成 零件库 第102部分：符合GB/T 16656一致性规范的视图交换协议 |
China National Standards 1,3 |
 English PDF |
| GB/T 22330.13-2008 |
Standard for specified animal disease free zone - Part 13: Highly pathogenic avian influenza free zone 无规定动物疫病区标准 第13部分：无高致病性禽流感区 |
China National Standards 1,3 |
English PDF |
| GB/T 1149.13-2008 |
Internal combustion engines - Piston rings - Part 13: Oil control rings 内燃机 活塞环 第13部分：油环 |
China National Standards 1,3 |
English PDF |
| GB/T 19114.31-2008 |
Industrial automation systems and integration - Industrial manufacturing management data - Part 31: Resource information model 工业自动化系统与集成 工业制造管理数据 第31部分：资源信息模型 |
China National Standards 1,3 |
English PDF |
| GB/T 7497.3-2008 |
Microprocessor system bus - 8-bit and 16-bit data (MULTIBUS Ⅰ) - Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors 微处理器系统总线 8位及16位数据（MULTIBUS I) 第3部分：对带有插针与插座连接器(间接配合)的欧洲板配置的机械与插针的描述 |
China National Standards 1,3 |
English PDF |
| GB/T 13576.1-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 1: Profiles 锯齿形(3°、30°)螺纹 第1部分：牙型 |
China National Standards 1,3 |
English PDF |
| GB/T 16573-2008 |
Micrographics - Microfilming of documents on 16 mm and 35 mmsilver-gelatin type microfilm - Operating procedures 缩微摄影技术 在16mm和35mm银-明胶型 缩微胶片上拍摄文献的操作程序 |
China National Standards 1,3 |
English PDF |
| GB/T 5271.13-2008 |
Information technology - Vocabulary Part 13: Computer graphics 信息技术 词汇 第13部分：计算机图形 |
China National Standards 1,3 |
English PDF |
| GB/T 1592.3-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 3: Main PTO dimensions and spline dimensions, location of PTO 农业拖拉机后置动力输出轴1、2和3型 第3部分：动力输出轴尺寸和花键尺寸、动力输出轴位置 |
China National Standards 1,3 |
English PDF |
| GB/T 1592.2-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 2 部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards 1,3 |
English PDF |
| GB/T 1592.1-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards 1,3 |
English PDF |
| GB/T 11810-2008 |
Tin113 - Indium113m generator 锡113-铟113m发生器 |
China National Standards 1,3 |
English PDF |
| GB/T 7672.3-2008 |
Glass-fiber wound winding wires - Part 3: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 玻璃丝包绕组线 第3部分：155级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards 1,3 |
English PDF |
| GB/T 7672.23-2008 |
Glass-fiber wound winding wires - Part 23: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 玻璃丝包绕组线 第23部分：180级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
China National Standards 1,3 |
English PDF |
| GB/T 7672.2-2008 |
Glass-fiber wound winding wires - Part 2: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 130 玻璃丝包绕组线 第2部分：130级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards 1,3 |
English PDF |
| GB/T 11018.2-2008 |
Copper winding wires with silk covering - Part 2: Bunched solderable polyurethane enamelled round copper wires, class130, with silk covering 丝包铜绕组线 第2部分：130级丝包直焊聚氨酯漆包束线 |
China National Standards 1,3 |
English PDF |
| GB/T 9331-2008 |
Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1kV and 3 kV 船舶电气装置 额定电压1kV和3kV挤包绝缘非径向电场单芯和多芯电力电缆 |
China National Standards 1,3 |
English PDF |
| GB/T 12976.1-2008 |
Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 1: General and construction requirements for power cables with rated voltages up to and including 30kV 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第1部分：额定电压30kV及以下电缆一般规定和结构要求 |
China National Standards 1,3 |
English PDF |
| GB/T 12972.4-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 4：Flexible coalcutter cables with individual metallic screens for rated voltages up to 1.9/3.3kV 矿用橡套软电缆 第4部分：额定电压1.9/3.3kV及以下采煤机金属屏蔽软电缆 |
China National Standards 1,3 |
English PDF |
| GB/T 12972.3-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 3：Trailing coalcutter cables with monitoring core and semiconducting screens for rated voltage of 0.66/1.14kV 矿用橡套软电缆 第3部分: 额定电压0.66/1.14kV 采煤机屏蔽监视加强型软电缆 |
China National Standards 1,3 |
English PDF |
| GB/T 12972.2-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 2：Flexible coalcutter cables for rated voltages up to 1.9/3.3kV 矿用橡套软电缆 第2部分：额定电压1.9/3.3kV及以下采煤机软电缆 |
China National Standards 1,3 |
English PDF |
| GB/T 18654.13-2008 |
Inspection of germplasm for cultured fishes - Part 13:Analysis of isozyme electrophoresis 养殖鱼类种质检验 第13部分：同工酶电泳分析 |
China National Standards 1,3 |
English PDF |
| GB/T 2951.31-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking 电缆和光缆绝缘和护套材料通用试验方法 第31部分：聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验 |
China National Standards 1,3 |
English PDF |
| GB/T 2951.13-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test 电缆和光缆绝缘和护套材料通用试验方法 第13部分: 通用试验方法 密度测定方法 吸水试验 收缩试验 |
China National Standards 1,3 |
English PDF |
| GB/T 18380.31-2008 |
Test on electric and optical fibre cables under fire conditions - Part 31:Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards 1,3 |
English PDF |
| GB/T 18380.13-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 13:Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles 电缆和光缆在火焰条件下的燃烧试验 第13部分：单根绝缘电线电缆火焰垂直蔓延试验 测定燃烧的滴落(物)/微粒的试验方法 |
China National Standards 1,3 |
English PDF |
| GB/T 22041-2008 |
Product of geographical indication - National cellar 1573 liquor 地理标志产品 国窖1573白酒 |
China National Standards 1,3 |
English PDF |
| GB/T 22055.1-2008 |
Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5in×1/36in) 显微镜 物镜螺纹 第1部分：RMS型物镜螺纹（4/5in×1/36in） |
China National Standards 1,3 |
English PDF |
| GB/T 22229-2008 |
Chemical products for industrial use - Determinaton of vapour pressure of solids and liquids at range 10-3 to 1Pa - Vapour pressure balance method 工业用化学品 固体及液体的蒸气压在10-３Pa至1Pa范围内的测定 蒸气压平衡法 |
China National Standards 1,3 |
English PDF |
| GB/T 22025-2008 |
Aerosol grade isobutane（A-31） 气雾剂级异丁烷（A-31） |
China National Standards 1,3 |
English PDF |
| GB/T 15257-2008 |
Mixed modulation chloroprene rubber CR321、CR322 混合调节型氯丁二烯橡胶 CR321、CR322 |
China National Standards 1,3 |
English PDF |
| GB/T 5121.13-2008 |
Methods for chemical analysis of copper and copper alloys - Part 13:Determination of aluminium content 铜及铜合金化学分析方法 第13部分：铝含量的测定 |
China National Standards 1,3 |
English PDF |
| GB/T 7095.7-2008 |
Enamelled rectangular copper winding wires - Part 7:Polyester enamelled rectangular copper wire, class 130 漆包铜扁绕组线 第7部分：130级聚酯漆包铜扁线 |
China National Standards 1,3 |
English PDF |
| GB/T 7095.3-2008 |
Enamelled rectangular copper winding wires - Part 3:Polyester enamelled rectangular copper wire, class 155 漆包铜扁绕组线 第3部分：155级聚酯漆包铜扁线 |
China National Standards 1,3 |
English PDF |
| GB/T 4127.13-2008 |
Bonded abrasive products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder 固结磨具 尺寸 第13部分：立式砂轮机用去毛刺和荒磨砂轮 |
China National Standards 1,3 |
English PDF |
| GB/T 4728.13-2008 |
Graphical symbols for diagrams - Part 13：Analogue elements 电气简图用图形符号 第13部分：模拟元件 |
China National Standards 1,3 |
English PDF |
| GB 5959.13-2008 |
Safety in electroheat installations - Part 13: particular requirements for electroheat installation with explosive atmosphere 电热装置的安全 第13部分: 对具有爆炸性气氛的电热装置的特殊要求 |
China National Standards 1,3 |
English PDF |
| GB/T 21888-2008 |
Acid brilliant red P-9B 150%（C.I. Acid red 131） 酸性艳红P-9B 150%（C.I.酸性红131） |
China National Standards 1,3 |
English PDF |
| GB/T 6109.9-2008 |
Enamelled round winding wire - Part 9:Solderable polyurethane enamelled round copper wire overcoated with polyamide,class 130 漆包圆绕组线 第9部分：130级聚酰胺复合直焊聚氨酯漆包铜圆线 |
China National Standards 1,3 |
English PDF |
| GB/T 6109.7-2008 |
Enamelled round winding wire - Part 7:Polyester enamelled round copper wire,class 130L 漆包圆绕组线 第7部分：130L级聚酯漆包铜圆线 |
China National Standards 1,3 |
English PDF |
| GB/T 6109.4-2008 |
Enamelled round winding wire - Part 4:Solderable polyurethane enamelled round copper wire,class 130 漆包圆绕组线 第4部分：130级直焊聚氨酯漆包铜圆线 |
China National Standards 1,3 |
English PDF |
| GB/T 6109.3-2008 |
Enamelled round winding wire - Part 3:Polyvinyl acetal enamelled round copper wire,class 120 漆包圆绕组线 第3部分：120级缩醛漆包铜圆线 |
China National Standards 1,3 |
English PDF |
| GB/T 6109.23-2008 |
Enamelled round winding wire - Part 23: Solderable polyurethane enamelled round copper wire,class 180 漆包圆绕组线 第23部分：180级直焊聚氨酯漆包铜圆线 |
China National Standards 1,3 |
English PDF |
| GB/T 6109.15-2008 |
Enamelled round winding wire - Part 15:Solderable polyurethane enamelled round copper wire,class 130,with a bonding layer 漆包圆绕组线 第15部分：130级自粘性直焊聚氨酯漆包铜圆线 |
China National Standards 1,3 |
English PDF |
| GB/T 6109.13-2008 |
Enamelled round winding wire - Part 13: Solderable polyesterimide enamelled round copper wire,class 180 漆包圆绕组线 第13部分：180级直焊聚酯亚胺漆包铜圆线 |
China National Standards 1,3 |
English PDF |
| GB/T 21547.3-2008 |
VMEbus Extensions for instrumentation - Part 3: TCP/IP-IEEE488.1 Interface specification VME总线对仪器的扩展 第3部分：TCP/IP-IEEE488.1 接口规范 |
China National Standards 1,3 |
English PDF |
| GB/T 15972.31-2008 |
Specifications for optical fibre test methods - Part 31: Measurement methods and test procedures for mechanical characteristics - tensile strength 光纤试验方法规范 第31部分：机械性能的测量方法和试验程序 抗张强度 |
China National Standards 1,3 |
English PDF |
| GB/T 20975.13-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 13：Determination of vanadium content N-benzoyl-Nphenylhydroxylamine spectrophotometric method 铝及铝合金化学分析方法 第13部分: 钒含量的测定 苯甲酰苯胲分光光度法 |
China National Standards 1,3 |
English PDF |
| GB/T 21450-2008 |
Crude petroleum and petroleum products - Compressibility factors for hydrocarbons in the range 638 kg/m3 to 1074 kg/m3 原油和石油产品 密度在638kg/m3到1074 kg/m3范围内的烃压缩系数 |
China National Standards 1,3 |
English PDF |
| GB/T 6113.105-2008 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30MHz to 1000MHz 无线电骚扰和抗扰度测量设备和测量方法规范 第1-5部分: 无线电骚扰和抗扰度测量设备 30MHz～1000MHz天线校准用试验场地 |
China National Standards 1,3 |
English PDF |
| GB/T 6113.103-2008 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus-Ancillary equipment - Disturbances power 无线电骚扰和抗扰度测量设备和测量方法规范 第1-3部分: 无线电骚扰和抗扰度测量设备 辅助设备 骚扰功率 |
China National Standards 1,3 |
English PDF |
| GB/T 18663.3-2007 |
Mechanical structure for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets,racks and subracks 电子设备机械结构 公制系列和英制系列的试验 第3部分：机柜、机架和插箱的电磁屏蔽性能试验 |
China National Standards 1,3 |
English PDF |
| GB/T 1408.3-2007 |
Electric strength of insulating materials test methods - Part 3: Additional requirements for 1,2/50μs impulse tests 绝缘材料电气强度试验方法 第3部分：1.2/50μs脉冲试验补充要求 |
China National Standards 1,3 |
English PDF |
| GB/T 10066.31-2007 |
Test methods for electroheat installtions - Part 31: High-frequency induction heating installation- Test methods for the determination of power output of the generator 电热装置的试验方法 第31部分：高频感应加热装置发生器输出功率的测定 |
China National Standards 1,3 |
English PDF |
| GB/T 3048.13-2007 |
Test methods for electrical properties of electric cables and wires - Part 13：Impulse voltage test 电线电缆电性能试验方法 第13部分：冲击电压试验 |
China National Standards 1,3 |
English PDF |
| GB 19510.13-2007 |
Lamp controlgear - Part 13: Particular requirements for d.c.or a.c. supplied electronic ballasts for discharge lamps(excluding fluorescent lamps) 灯的控制装置 第13部分: 放电灯(荧光灯除外)用直流或交流电子镇流器的特殊要求 |
China National Standards 1,3 |
English PDF |
| GB/T 19882.31-2007 |
Automatic meter reading system - Part 3-1: Application layer data exchange protocols - Object identification system 自动抄表系统 第3-1部分：应用层数据交换协议 对象标识系统 |
China National Standards 1,3 |
English PDF |
| GB/T 21161-2007 |
Agricultural trailers - Single-acting telescopic tipping cylinders - 25MPa(250bar)series - Types1，2and3 - Interchangeability dimensions 农用挂车 单作用套筒伸缩油缸25MPa（250bar）系列Ⅰ型、Ⅱ型和Ⅲ型互换尺寸 |
China National Standards 1,3 |
English PDF |
| GB/T 20432.13-2007 |
Photography - Photographic-grade chemicals - Test methods - Part 13: Determination of pH 摄影 照相级化学品 试验方法 第13部分：pH值的测定 |
China National Standards 1,3 |
English PDF |
| GB/T 20485.13-2007 |
Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration by laser interferometry 振动与冲击传感器校准方法 第13部分: 激光干涉法冲击绝对校准 |
China National Standards 1,3 |
English PDF |
| GB/T 18311.31-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources 纤维光学互连器件和无源器件 基本试验和测量程序 第3-31部分：检查和测量 纤维光学光源耦合功率比测量 |
China National Standards 1,3 |
English PDF |
| GB/T 18311.16-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules 纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分：检查和测量 球面抛光套管端面半径 |
China National Standards 1,3 |
English PDF |
| GB/T 15157.14-2007 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范 |
China National Standards 1,3 |
English PDF |
| GB/T 14805.3-2007 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax release number:1) - Part 3: Syntax rules specific to interactive EDI 行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第3部分: 交互式电子数据交换专用的语法规则 |
China National Standards 1,3 |
English PDF |
| GB/T 11313.4-2007 |
Radio-frequency connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器 第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards 1,3 |
English PDF |
| GB/T 18802.341-2007 |
Components for low-voltage surge protective devices - Part 341: Secification for thyristor surge suppressors(TSS) 低压电涌保护器元件 第341部分：电涌抑制晶闸管（TSS）规范 |
China National Standards 1,3 |
English PDF |
| GB/T 18802.331-2007 |
Components for low-voltage surge protective devices - Part 331: Secification for metal oxide varistors(MOV) 低压电涌保护器元件 第331部分：金属氧化物压敏电阻（MOV）规范 |
China National Standards 1,3 |
English PDF |
| GB/T 18802.321-2007 |
Components for low-voltage surge protective devices - Part 321: Specifications for avalanche breakdown diode(ABD) 低压电涌保护器元件 第321部分：雪崩击穿二极管（ABD）规范 |
China National Standards 1,3 |
English PDF |
| GB 3836.17-2007 |
Electrical apparatus for explosive gas atmosphere - Part 13: Construction and use of rooms or buildings protected by pressurization 爆炸性气体环境用电气设备 第17部分：正压房间或建筑物的结构和使用 |
China National Standards 1,3 |
English PDF |
| GB/T 19851.13-2007 |
Sports equipment and playground for middle school ＆ primary school - Part 13：Volleyball net post, badminton net post, Tennis net post 中小学体育器材和场地 第13部分：排球网柱、羽毛球网柱、网球网柱 |
China National Standards 1,3 |
English PDF |
| GB/T 328.13-2007 |
Test methods for building sheets for waterproofing - Part 13: Plastic and rubber sheets for waterproofing-dimensional stability 建筑防水卷材试验方法 第13部分：高分子防水卷材 尺寸稳定性 |
China National Standards 1,3 |
English PDF |
| GB/T 18015.31-2007 |
Multicore and symmetrical pair/quad cables for digital communications - Part 31: Work area wiring - Blank detail specification 数字通信用对绞或星绞多芯对称电缆 第31部分：工作区布线电缆 空白详细规范 |
China National Standards 1,3 |
English PDF |
| GB/T 18802.311-2007 |
Components for low-voltage surge protective devices - Part 311: Specification for gas discharge tubes(GDT) 低压电涌保护器元件 第311部分：气体放电管（GDT）规范 |
China National Standards 1,3 |
English PDF |
| GB/T 20718-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connector for vehicles with 12V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 12V13芯型 |
China National Standards 1,3 |
English PDF |
| GB/T 19659.3-2006 |
Industrial automation systems and integration - Open systems application integration framework - Part 3: Reference description for IEC 61158-based control systems 工业自动化系统与集成 开放系统应用集成框架 第3部分：基于IEC 61158控制系统的参考描述 |
China National Standards 1,3 |
English PDF |
| GB/T 4169.13-2006 |
Components of injection moulds for plastics ― Part 13: Return pin 塑料注射模零件 第13部分：复位杆 |
China National Standards 1,3 |
English PDF |
| GB/T 20258.3-2006 |
Data dictionary for fundamental geographic information features - Part 3：Data dictionary for fundamental geographic information features of 1:25 000 1:50 000 1:100 000 scale 基础地理信息要素数据字典 第3部分：1:25 000 1:50 000 1:100 000基础地理信息要素数据字典 |
China National Standards 1,3 |
English PDF |
| GB/T 20540.1-2006 |
Digital data communication for measurement and control - Fieldbus for use in industrial systems Type 3: PROFIBUS specification - Part 1: Overview and guidance 测量和控制数字数据通信 工业控制系统用现场总线 类型3：PROFIBUS规范 第1部分：概述和导则 |
China National Standards 1,3 |
English PDF |
| GB/T 4841.3-2006 |
Colour cards of standard depths for dyeing with dyestuffs 2/1、1/3、1/6、1/12、1/25 染料染色标准深度色卡 2/1、1/3、1/6、1/12、1/25 |
China National Standards 1,3 |
English PDF |
| GB 20697-2006 |
13%MCPA-Na aqueous solution 13%2甲4氯钠水剂 |
China National Standards 1,3 |
English PDF |
| GB/T 20522-2006 |
Semiconductor devices Part 14-3: Semiconductor sensors - Pressure sensors 半导体器件 第14-3部分: 半导体传感器-压力传感器 |
China National Standards 1,3 |
English PDF |
| GB/T 20257.3-2006 |
Cartographic symbols for national fundamental scale maps -- Part 3: Specifications for cartographic symbols 1:25000 1:50000 & 1:100000 topographic maps 国家基本比例尺地图图式 第3部分：1:25000 1:50000 1:100000地形图图式 |
China National Standards 1,3 |
English PDF |
| GB/T 20226.2-2006 |
Micrographics -- A6 size microfilm jackets Part 2: Other types of jacket for 16mm and 35mm microfilm 缩微摄影技术 缩微胶片A6尺寸封套 第2部分:16mm和35mm缩微胶片用其他类型封套 |
China National Standards 1,3 |
English PDF |
| GB 5135.13-2006 |
Automatic sprinkler system Part 13:Performance requirements and test methods of drencher head 自动喷水灭火系统 第13部分:水幕喷头 |
China National Standards 1,3 |
English PDF |
| GB 10395.13-2006 |
Tractors and machinery for agriculture and forestry - Technical means for ensuring safety - Part 13: Powered walk-behind and hand-held lawn trimmers and lawn edge trimmers 农林拖拉机和机械 安全技术要求 第13部分：后操纵式和手持式动力草坪修剪机和草坪修边机 |
China National Standards 1,3 |
English PDF |
| GB/T 12668.4-2006 |
Adjustable speed electrical power drive systems - part 4: General requirements - Rating specifications for a.c. power drive systems above 1000V a.c. and not exceeding 35kV 调速电气传动系统 第4部分:一般要求 交流电压1000V以上但不超过35kV的交流调速电气传动系统额定值的规定 |
China National Standards 1,3 |
English PDF |
| GB/T 5271.31-2006 |
Information technology - Vocabulary Part 31: Artificial intelligence - Machine learning 信息技术 词汇 第31部分:人工智能 机器学习 |
China National Standards 1,3 |
English PDF |
| GB/T 16262.3-2006 |
Information technology - Abstract Syntax Notation One (ASN.1) - Part 3: Constraint specification 信息技术 抽象语法记法一(ASN.1) 第3部分:约束规范 |
China National Standards 1,3 |
English PDF |
| GB/T 20127.13-2006 |
Steel and alloy - Determination of trace element contents Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method 钢铁及合金 痕量元素的测定 第13部分：碘化物萃取-苯基荧光酮光度法测定锡含量 |
China National Standards 1,3 |
English PDF |
| GB/T 3871.13-2006 |
Agricultural tractors - Test procedures - Part 13: Measurement of exhaust smoke 农业拖拉机 试验规程 第13部分：排气烟度测量 |
China National Standards 1,3 |
English PDF |
| GB/T 3810.13-2006 |
Test methods of ceramic tiles Part 13: Determination of chemical resistance 陶瓷砖试验方法 第13部分:耐化学腐蚀性的测定 |
China National Standards 1,3 |
English PDF |
| GB/T 19969-2005 |
Information technology -- 130 mm optical disk cartridges for information interchange -- Capacity : 2.6 Gbytes per cartridge 信息技术 信息交换用130mm盒式光盘 容量：每盒2.6G字节 |
China National Standards 1,3 |
English PDF |
| GB/T 11045.13-2005 |
Textiles-Tests for color fastness-Miscellaneous tests part13:Colour fastness of wool dyes to processes using chemical means for creasing pleating and setting 纺织品 色牢度试验 其他实验第13部分:染色毛纺织品耐化学褶被、褶裥和定型加工色牢度 |
China National Standards 1,3 |
English PDF |
| GB/T 6002.13-2005 |
Textile machinery Terminology -- Part 13: Dyeing and finishing machinery -- Tentering and heat-treatment machinery 纺织机械术语 第13部分：染整机械 拉幅定形机 |
China National Standards 1,3 |
English PDF |
| GB 19212.13-2005 |
Safety of power transformers, power supply units and similar devices -- Part 13: Particular requirements for constant voltage transformers 电力变压器、电源装置和类似产品的安全 第13部分：恒压变压器的特殊要求 |
China National Standards 1,3 |
English PDF |
| GB/T 19936.1-2005 |
Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分：油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards 1,3 |
English PDF |
| GB/T 20025.2-2005 |
Rubber and plastics hoses and hose assemblise for automotive air conditioning -- Refrigerant 134a 汽车空调用橡胶和塑料软管及软管组合件 耐制冷剂134a |
China National Standards 1,3 |
English PDF |
| GB 5226.4-2005 |
Safety of machinery-Electrical equipment of machines-Part 31:Particular safety and EMC requirements for sewing machines,units and systems 机械安全 机械电气设备 第31部分：缝纫机、缝制单元和缝制系统的特殊安全和EMC要求 |
China National Standards 1,3 |
English PDF |
| GB 5226.3-2005 |
Sefety of machinery-Eletrical equipment of machines-Part 11:Requirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exceeding 36kV 机械安全 机械电气设备 第11部分：电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件 |
China National Standards 1,3 |
English PDF |
| GB/T 19896-2005 |
Degrees of projected image sharpness for 70,35and 16mm motion-picture projection systems 70、35和16mm电影放映系统 画面清晰度等级 |
China National Standards 1,3 |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
