Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 38998-2020 |
Cut-size office paper—Measurement of edge quality 裁切后办公用纸 边缘质量的测定 |
China National Standards Measure |
 English PDF |
| GB/T 39018-2020 |
Intelligent lighting equipment—Non-active mode power Measurement 智能照明设备 非主功能模式功率的测量 |
China National Standards Measure |
English PDF |
| GB/T 39042-2020 |
Measurement of the magnetic properties of electrical steels by means of a single sheet tester—H-coil method 电工钢单片磁性能测试 H线圈法 |
China National Standards Measure |
English PDF |
| GB/T 12967.1-2020 |
Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分：耐磨性的测定 |
China National Standards Measure |
English PDF |
| GB/T 19233-2020 |
Measurement methods of fuel consumption for light-duty vehicles 轻型汽车燃料消耗量试验方法 |
China National Standards Measure |
English PDF |
| GB/T 38889-2020 |
Antennas and reception systems for radio interference—Antenna Measurement—Vehicle antennas and system 天线及接收系统的无线电干扰 天线测量 车载天线及系统 |
China National Standards Measure |
English PDF |
| GB/T 38897-2020 |
Non-destructive testing—Measurement method for material elastic modulus and Poisson’s ratio using ultrasoinc velocity 无损检测 弹性模量和泊松比的超声测量方法 |
China National Standards Measure |
English PDF |
| GB/T 38841-2020 |
Mechanical properties Measurement—Room temperature tensile test of reacted Nb3Sn composite superconductors 力学性能测量 反应后的Nb3Sn复合超导线室温拉伸试验方法 |
China National Standards Measure |
English PDF |
| GB/T 38769-2020 |
Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces 金属材料 预裂纹夏比试样冲击加载断裂韧性的测定 |
China National Standards Measure |
English PDF |
| GB/T 38737-2020 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by Measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 |
China National Standards Measure |
English PDF |
| GB/T 38777-2020 |
Technical requirements and methods of Measurement for digital terrestrial television external receiving module 地面数字电视外接模块式接收终端技术要求和测量方法 |
China National Standards Measure |
English PDF |
| GB/T 28239-2020 |
Limits and Measurement methods for non-road diesel engine specific fuel consumption 非道路用柴油机燃料消耗率限值及试验方法 |
China National Standards Measure |
English PDF |
| GB/T 38617-2020 |
Industrial-process Measurement and control instruments terminology—Level measuring instruments terminology 工业自动化仪表术语 物位仪表术语 |
China National Standards Measure |
English PDF |
| GB/T 38677-2020 |
Gas analysis—Measurement procedure and result—Technical requirements for calibration 气体分析 测量过程及结果 校准技术要求 |
China National Standards Measure |
English PDF |
| GB/T 38588-2020 |
In-situ Measurements of heat loss of insulating pipes for urban heat-supplying 城镇供热保温管网系统散热损失现场检测方法 |
China National Standards Measure |
English PDF |
| GB/T 20840.103-2020 |
Instrument transformers—Part 103：The use of instrument transformers for power quality Measurement 互感器 第103部分：互感器在电能质量测量中的应用 |
China National Standards Measure |
English PDF |
| GB/T 10068-2020 |
Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement, evaluation and limits of vibration severity 轴中心高为56mm及以上电机的机械振动 振动的测量、评定及限值 |
China National Standards Measure |
English PDF |
| GB/T 38532-2020 |
Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size 微束分析 电子背散射衍射 平均晶粒尺寸的测定 |
China National Standards Measure |
English PDF |
| GB/T 38518-2020 |
Measurement of coating thickness on flexible film substrate 柔性薄膜基体上涂层厚度的测量方法 |
China National Standards Measure |
English PDF |
| GB/T 4595-2020 |
Measurement of noise on board vessels 船上噪声测量 |
China National Standards Measure |
English PDF |
| GB/T 38446-2020 |
Micro-electromechanical system technology—Test methods for tensile property Measurement of strip thin films 微机电系统（MEMS）技术 带状薄膜抗拉性能的试验方法 |
China National Standards Measure |
English PDF |
| GB/T 39729-2020 |
General requirements for Measurement of cell purity—Flow cytometry 细胞纯度测定通用要求 流式细胞测定法 |
China National Standards Measure |
English PDF |
| GB/T 39643-2020 |
Geometrical product specifications (GPS)—Systematic errors and contributions to Measurement uncertainty of length measurement due to thermal influences 产品几何技术规范（GPS） 长度测量中温度影响引入的系统误差和测量不确定度来源 |
China National Standards Measure |
English PDF |
| GB/T 39640-2020 |
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure 家用电器及类似器具电磁场相对于人体曝露的测量方法 |
China National Standards Measure |
English PDF |
| GB/T 39635-2020 |
Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test 金属材料 仪器化压入法测定压痕拉伸性能和残余应力 |
China National Standards Measure |
English PDF |
| GB/T 39627-2020 |
Technical specification of intelligent Measurement and control devices for smart hydropower plant 智能水电厂智能测控装置技术规范 |
China National Standards Measure |
English PDF |
| GB/T 39585-2020 |
Opto-electronic Measurement—Performance requirements and test methods of light distribution measurement system 光电测量 配光测试系统的性能要求和检测方法 |
China National Standards Measure |
English PDF |
| GB/T 33523.71-2020 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 71: Software Measurement standards 产品几何技术规范（GPS） 表面结构 区域法 第71部分：软件测量标准 |
China National Standards Measure |
English PDF |
| GB/T 33523.70-2020 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 70: Material Measures 产品几何技术规范（GPS） 表面结构 区域法 第70部分：实物测量标准 |
China National Standards Measure |
English PDF |
| GB/T 18779.6-2020 |
Geometrical product specifications (GPS)—Inspection by Measurement of workpieces and measuring equipment—Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces 产品几何技术规范（GPS） 工件与测量设备的测量检验 第6部分：仪器和工件接受/拒收的通用判定规则 |
China National Standards Measure |
English PDF |
| GB/T 18779.5-2020 |
Geometrical product specifications (GPS)—Inspection by Measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments 产品几何技术规范（GPS） 工件与测量设备的测量检验 第5部分：指示式测量仪器的检验不确定度 |
China National Standards Measure |
English PDF |
| GB/T 18779.4-2020 |
Geometrical product specifications (GPS)—Inspection by Measurement of workpieces and measuring equipment—Part 4: Background on functional limits and specification limits in decision rules 产品几何技术规范（GPS） 工件与测量设备的测量检验 第4部分：判定规则中功能限与规范限的基础 |
China National Standards Measure |
English PDF |
| GB/T 6113.203-2020 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 2-3: Methods of Measurement of disturbances and immunity—Radiated disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范 第2-3部分：无线电骚扰和抗扰度测量方法 辐射骚扰测量 |
China National Standards Measure |
English PDF |
| GB/T 29239-2020 |
Energy efficiency metrics and Measurement method for mobile communication equipment—Base station 移动通信设备节能参数和测试方法 基站 |
China National Standards Measure |
English PDF |
| GB/T 25897-2020 |
Residual resistance ratio Measurement—Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors 剩余电阻比测量 铌-钛（Nb-Ti）和铌三锡（Nb3Sn）复合超导体剩余电阻比测量 |
China National Standards Measure |
English PDF |
| GB/T 24635.4-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of Measurement—Part 4: Evaluating task-specific measurement uncertainty using simulation 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第4部分：应用仿真技术评估特定任务的测量不确定度 |
China National Standards Measure |
English PDF |
| GB/T 24635.1-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of Measurement—Part 1: Overview and metrological characteristics 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第1部分：概要和计量特性 |
China National Standards Measure |
English PDF |
| GB/T 21246-2020 |
Measurement method for cathodic protection parameters of buried steel pipelines 埋地钢质管道阴极保护参数测量方法 |
China National Standards Measure |
English PDF |
| GB/T 14098-2020 |
Turbines and turbine sets—Measurement of emitted airborne noise—Engineering/survey method 燃气轮机和燃气轮机机组 气载噪声的测量 工程法/简易法 |
China National Standards Measure |
English PDF |
| GB/T 10910-2020 |
Agricultural wheeled tractors and field machinery—Measurement of whole-body vibration of the operator 农业轮式拖拉机和田间作业机械 驾驶员全身振动的测量 |
China National Standards Measure |
English PDF |
| GB/T 8421-2020 |
Agricultural wheeled tractors—Operator's seat—Laboratory Measurement of transmitted vibration 农业轮式拖拉机 驾驶员座椅 传递振动的实验室测量 |
China National Standards Measure |
English PDF |
| GB/T 39424.2-2020 |
Road vehicles—Traffic accident analysis—Part 2: Guidelines for the use of impact severity Measures 道路车辆 交通事故分析 第2部分：碰撞严重度测量方法使用指南 |
China National Standards Measure |
English PDF |
| GB/T 19703-2020 |
In vitro diagnostic medical devices—Measurement of quantities in samples of biological origin—Requirements for certified reference materials and the content of supporting documentation 体外诊断医疗器械 生物源性样品中量的测量 有证参考物质及支持文件内容的要求 |
China National Standards Measure |
English PDF |
| GB/T 38336-2019 |
Industrial, scientific and medical robots—Electromagnetic compatibility—Emission methods of Measurement and limits 工业、科学和医疗机器人 电磁兼容 发射测试方法和限值 |
China National Standards Measure |
English PDF |
| GB/T 38432-2019 |
Particle—Gas-solid reaction Measurement—Micro fluidized bed method 颗粒 气固反应测定 微型流化床法 |
China National Standards Measure |
English PDF |
| GB/T 38368-2019 |
Geometrical product specifications (GPS)—Requirements of digital model-based Measurement 产品几何技术规范（GPS） 基于数字化模型的测量通用要求 |
China National Standards Measure |
English PDF |
| GB/T 38340-2019 |
Small craft—Reciprocating internal combustion engines exhaust emission Measurement—Test-bed measurement of gaseous and particulate exhaust emissions 小艇 往复式内燃机排放测量 气体和颗粒排放物的试验台测量 |
China National Standards Measure |
English PDF |
| GB/T 38336-2019 |
Industrial, scientific and medical robots—Electromagnetic compatibility—Emission methods of Measurement and limits
工业、科学和医疗机器人 电磁兼容 发射测试方法和限值 |
China National Standards Measure |
English PDF |
| GB 4824-2019 |
Industrial,scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of Measurement 工业、科学和医疗设备 射频骚扰特性 限值和测量方法 |
China National Standards Measure |
English PDF |
| GB 4793.4-2019 |
Safety requirements for electrical equipment for Measurement,control and laboratory use—Part 4: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials 测量、控制和实验室用电气设备的安全要求 第4部分：用于处理医用材料的灭菌器和清洗消毒器的特殊要求 |
China National Standards Measure |
English PDF |
| GB/T 50597-2019 |
Standard for terminology Measure units and symbols in textile engineering
纺织工程常用术语、计量单位及符号标准 |
China National Standards Measure |
English PDF |
| GB/T 37966-2019 |
Nanotechnologies—Measurement method for peroxidase-like activity of iron oxide nanoparticles 纳米技术 氧化铁纳米颗粒类过氧化物酶活性测量方法 |
China National Standards Measure |
English PDF |
| GB/T 37803-2019 |
Integrated management Measures for pests of plants for planting 种植用植物有害生物综合管理措施 |
China National Standards Measure |
English PDF |
| GB/T 37688-2019 |
Information technology—Measurement of re-flowable document interoperability 信息技术 流式文档互操作性的度量 |
China National Standards Measure |
English PDF |
| GB/T 25104-2019 |
Automatic Measurement of water content in crude oil—RF method 原油水含量的自动测定 射频法 |
China National Standards Measure |
English PDF |
| GB/T 25000.23-2019 |
Systems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 23: Measurement of system and software product quality 系统与软件工程 系统与软件质量要求和评价(SQuaRE) 第23部分：系统与软件产品质量测量 |
China National Standards Measure |
English PDF |
| GB/T 25000.22-2019 |
Systems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 22: Measurement of quality in use 系统与软件工程 系统与软件质量要求和评价(SQuaRE) 第22部分：使用质量测量 |
China National Standards Measure |
English PDF |
| GB/T 25000.21-2019 |
Systems and software engineering—Systems and software Quality Requirements and Evaluation (SQuaRE)—Part 21: Quality Measure elements 系统与软件工程 系统与软件质量要求和评价(SQuaRE) 第21部分：质量测度元素 |
China National Standards Measure |
English PDF |
| GB/T 10129-2019 |
Methods of Measurement of magnetic properties of electrical steel strip and sheet at medium frequencies 电工钢带（片）中频磁性能测量方法 |
China National Standards Measure |
English PDF |
| GB 15744-2019 |
The limits and Measurement methods of fuel consumption for motorcycles and mopeds 摩托车和轻便摩托车燃油消耗量限值及测量方法 |
China National Standards Measure |
English PDF |
| GB/T 38437-2019 |
Methods of Measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method 用抽拉或旋转方式测量铁磁材料样品磁偶极矩的方法 |
China National Standards Measure |
English PDF |
| GB/T 37617-2019 |
Test methods for Zeta potential of nanofiltration membrane surface—Streaming potential Measurement 纳滤膜表面Zeta电位测试方法 流动电位法 |
China National Standards Measure |
English PDF |
| GB/T 19289-2019 |
Methods of Measurement of resistivity，density and stacking factor of electrical steel strip and sheet 电工钢带（片）的电阻率、密度和叠装系数的测量方法 |
China National Standards Measure |
English PDF |
| GB/T 37382-2019 |
Optical functional films—Films for backlight unit of liquid crystal display—High temperature and high humidity aging Measurement 光学功能薄膜 液晶显示背光模组用薄膜 高温高湿老化性能测定方法 |
China National Standards Measure |
English PDF |
| GB/T 351-2019 |
Metallic materials—Resistivity Measurement method 金属材料 电阻率测量方法 |
China National Standards Measure |
English PDF |
| GB/T 37692-2019 |
Running mode specific fuel consumption limits and Measurement methods for small spark ignition engines of non-road mobile machinery 非道路移动机械用小型点燃式发动机工况法燃料消耗率限值与测量方法 |
China National Standards Measure |
English PDF |
| GB/T 37543-2019 |
：Measurement method for total electric field strength and ion current density of DC transmission line and converter station
直流输电线路和换流站的合成场强与离子流密度的测量方法 |
China National Standards Measure |
English PDF |
| GB/T 24964-2019 |
Refrigerated light hydrocarbon fluids—Measurement of cargoes on board LNG carriers 冷冻轻烃流体 液化天然气运输船上货物量的测量 |
China National Standards Measure |
English PDF |
| GB/T 24959-2019 |
Refrigerated light hydrocarbon fluids—General requirements for temperature Measurement system in cargo tanks of LNG carrier 冷冻轻烃流体 液化天然气运输船货舱内温度测量系统一般要求 |
China National Standards Measure |
English PDF |
| GB/T 17626.5-2019 |
Electromagnetic compatibility—Testing and Measurement techniques－Surge immunity test 电磁兼容 试验和测量技术 浪涌（冲击）抗扰度试验 |
China National Standards Measure |
English PDF |
| GB/T 11828.1-2019 |
Instruments for stage Measurement—Part 1:Float-type stage gauge 水位测量仪器 第1部分：浮子式水位计 |
China National Standards Measure |
English PDF |
| GB/T 37412-2019 |
Lasers and laser-related equipment—Cavity ring-down method for high reflectance Measurement 激光器和激光相关设备 光腔衰荡高反射率测量方法 |
China National Standards Measure |
English PDF |
| GB/T 28438.2-2019 |
Objective assessment and Measurement methods for coverage of digital terrestrial television broadcasting signals—Part 2: Mobile reception 地面数字电视广播信号覆盖质量客观评估和测量方法 第2部分：移动接收 |
China National Standards Measure |
English PDF |
| GB/T 21451.5-2019 |
Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 5: Measurement of temperature in marine vessels 石油和液体石油产品 储罐中液位和温度自动测量法 第5部分：油船舱中的温度测量 |
China National Standards Measure |
English PDF |
| GB/T 21451.2-2019 |
Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 2:Measurement of level in marine vessels 石油和液体石油产品 储罐中液位和温度自动测量法 第2部分: 油船舱中的液位测量 |
China National Standards Measure |
English PDF |
| GB/T 16789-2019 |
Specifications of the baseline Measurements 比长基线测量规范 |
China National Standards Measure |
English PDF |
| GB/T 36964-2018 |
Software engineering—Specification for software development cost Measurement 软件工程-软件开发成本度量规范 |
China National Standards Measure |
English PDF |
| GB/T 37139-2018 |
Requirements for EMC Measurement methods for DC powered equipment 直流供电设备的EMC测量方法要求 |
China National Standards Measure |
English PDF |
| GB/T 36982-2018 |
Interface technical requirements and Measurement methods of the digital optical line terminal used in program distribution network 节目分配网络ASI数字光端机接口技术要求和测量方法 |
China National Standards Measure |
English PDF |
| GB/T 36998-2018 |
Technical requirements and Measurement methods for ASI combiner/splitter used in program distribution network 节目分配网络ASI合路/分路器技术要求和测量方法 |
China National Standards Measure |
English PDF |
| GBZ/T 189.3-2018 |
Measurement of workplace physical factors - Part 3: 1 Hz to 100 kHz - electric and magnetic fields 工作场所物理因素测量-第3部分：1Hz～100kHz-电场和磁场 |
China National Standards Measure |
English PDF |
| GB/T 37257-2018 |
Wind turbines—Measurement of mechanical loads 风力发电机组-机械载荷测量 |
China National Standards Measure |
English PDF |
| GB/T 37016-2018 |
Technical requirements of Measurement and verification about power saving in demand response for power users 电力用户需求响应节约电力测量与验证技术要求 |
China National Standards Measure |
English PDF |
| GB/T 37161-2018 |
Gears—Evaluation of instruments for Measurement of individual gears 齿轮-齿轮测量仪的评价 |
China National Standards Measure |
English PDF |
| GB/T 37130-2018 |
Measurement methods for electromagnetic fields of vehicle with regard to human exposure 车辆电磁场相对于人体曝露的测量方法 |
China National Standards Measure |
English PDF |
| GB/T 6113.201-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods－Part 2-1：Methods of Measurement of disturbances and immunity－Conducted disturbance measurements 无线电骚扰和抗扰度测量设备和测量方法规范-第2-1部分：无线电骚扰和抗扰度测量方法-传导骚扰测量 |
China National Standards Measure |
English PDF |
| GB/T 8190.8-2018 |
Reciprocating internal combustion engines—Exhaust emission Measurement—Part 8：Engine group determination 往复式内燃机-排放测量-第8部分：发动机系组的确定 |
China National Standards Measure |
English PDF |
| GB/T 36989-2018 |
Measurement of liquid hydrocarbons by ultrasonic flow meters 用超声流量计测量液态烃流量 |
China National Standards Measure |
English PDF |
| GB 3847-2018 |
Limits and Measurement methods for emissions form diesel vehicles under free acceleration and lugdown cycle 柴油车污染物排放限值及测量方法（自由加速法及加载减速法） |
China National Standards Measure |
English PDF |
| GB 18285-2018 |
Limits and Measurement methods for emissions from gasoline vehicles under two-speed idle conditions and simple driving mode conditions 汽油车污染物排放限值及测量方法（双怠速法及简易工况法） |
China National Standards Measure |
English PDF |
| GB/T 37167-2018 |
Particle—Separation and Measurement of trace magnetic materials(elements) in inorganic powder 颗粒-无机粉体中微量和痕量磁性物质分离与测定 |
China National Standards Measure |
English PDF |
| GB/T 26068-2018 |
Test method for carrier recombination lifetime in silicon wafers and silicon ingots—Non-contact Measurement of photoconductivity decay by microwave reflectance method 硅片和硅锭载流子复合寿命的测试-非接触微波反射光电导衰减法 |
China National Standards Measure |
English PDF |
| GB/T 50355-2018 |
Standard of limit and Measurement method of vibration in the room of residential buildings 住宅建筑室内振动限值及其测量方法标准 |
China National Standards Measure |
English PDF |
| GB/T 51290-2018 |
Construction project cost index index classification and Measurement standard 建设工程造价指标指数分类与测算标准 |
China National Standards Measure |
English PDF |
| GB/T 36969-2018 |
Nanotechnology—Method for the Measurement of the nanofilm-thickness by atomic force microscopy 纳米技术-原子力显微术测定纳米薄膜厚度的方法 |
China National Standards Measure |
English PDF |
| GB/T 17944-2018 |
Specifications for the dense gravity Measurement 加密重力测量规范 |
China National Standards Measure |
English PDF |
| GB 36886-2018 |
Limit and Measurement methods for exhaust smoke form non-road mobile machinery equipped with diesel engine 非道路柴油移动机械排气烟度限值及测量方法 |
China National Standards Measure |
English PDF |
| GB/T 36128-2018 |
Regulation of mass Measurement permissible errors for jewelry and precious metal products 珠宝贵金属产品质量测量允差的规定 |
China National Standards Measure |
English PDF |
| GB/T 36216-2018 |
Ships and marine technology—Ship recycling management systems—Measures to prevent asbestos emission and exposure during ship recycling 船舶与海上技术 拆船管理体系 拆船过程中防止石棉发散和暴露的措施 |
China National Standards Measure |
English PDF |
| GB/T 36275-2018 |
Limit and Measurement methods of electromagnetic compatibility for private digital mobile radio equipment 专用数字对讲设备电磁兼容限值和测量方法 |
China National Standards Measure |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
