Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 29019-2012 |
Transparent film fold wrapPINg machine 透明膜折叠式裹包机 |
China National Standards PIN |
 English PDF |
| GB/T 28964-2012 |
Small craft - Bilge-pumPINg systems 小艇 舱底泵系统 |
China National Standards PIN |
English PDF |
| GB/T 28954-2012 |
Automotive engines - SPIN-on filters for lubricating oil - Connect dimensions 汽车发动机 旋装式机油滤清器 连接尺寸 |
China National Standards PIN |
English PDF |
| GB/T 28953-2012 |
Automotive diesel - SPIN-on fuel filters for diesel engines - Mounting and connecting dimensions 汽车柴油机 旋装式燃油滤清器 安装和连接尺寸 |
China National Standards PIN |
English PDF |
| GB/T 29402.1-2012 |
Storage of cereals and pulses - Part 1：General recommendations for the keePINg of cereals 谷物和豆类储存 第1部分：谷物储存的一般建议 |
China National Standards PIN |
English PDF |
| GB/T 29265.305-2012 |
Information technology - Information device intelligent grouPINg and resource sharing - Part 305：Power line communication interface 信息技术 信息设备资源共享协同服务 第305部分：电力线通信接口 |
China National Standards PIN |
English PDF |
| GB/T 17780.2-2012 |
Textile machinery - Safety requirements - Part 2: SPINning preparatory and spinning machines 纺织机械 安全要求 第2部分：纺纱准备和纺纱机械 |
China National Standards PIN |
English PDF |
| GB/Z 28805-2012 |
Intelligrid methodology for develoPINg requirements for energy systems 能源系统需求开发的智能电网方法 |
China National Standards PIN |
English PDF |
| GB 3883.20-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for strapPINg tools 手持式电动工具的安全 第2部分：捆扎机的专用要求 |
China National Standards PIN |
English PDF |
| GB 17464-2012 |
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamPINg units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included) 连接器件 电气铜导线 螺纹型和无螺纹型夹紧件的安全要求 适用于0.2 mm2以上至35 mm2（包括）导线的夹紧件的通用要求和特殊要求 |
China National Standards PIN |
English PDF |
| GB/T 28799.3-2012 |
Plastics piPINg systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings 冷热水用耐热聚乙烯（PE-RT）管道系统 第3部分：管件 |
China National Standards PIN |
English PDF |
| GB/T 28799.2-2012 |
Plastics piPINg systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯（PE-RT）管道系统 第2部分：管材 |
China National Standards PIN |
English PDF |
| GB/T 28799.1-2012 |
Plastics piPINg systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分：总则 |
China National Standards PIN |
English PDF |
| GB/T 28923.5-2012 |
MapPINg requirements for the natural disaster remote sensing thematic maps - Part 5: Relief and recovery assessment thematic maps 自然灾害遥感专题图产品制作要求 第5部分：救助与恢复重建评估专题图产品 |
China National Standards PIN |
English PDF |
| GB/T 28923.4-2012 |
MapPINg requirements for the natural disaster remote sensing thematic maps - Part 4: Loss assessment thematic maps 自然灾害遥感专题图产品制作要求 第4部分：损失评估专题图产品 |
China National Standards PIN |
English PDF |
| GB/T 28923.3-2012 |
MapPINg requirements for the natural disaster remote sensing thematic maps - Part 3: Risk assessment thematic maps 自然灾害遥感专题图产品制作要求 第3部分：风险评估专题图产品 |
China National Standards PIN |
English PDF |
| GB/T 28923.2-2012 |
MapPINg requirements for the natural disasters remote sensing thematic maps - Part 2: Monitoring thematic maps 自然灾害遥感专题图产品制作要求 第2部分：监测专题图产品 |
China National Standards PIN |
English PDF |
| GB/T 28923.1-2012 |
MapPINg requirements for the natural disaster remote sensing thematic maps - Part 1: Classification, codes and mapping 自然灾害遥感专题图产品制作要求 第1部分：分类、编码与制图 |
China National Standards PIN |
English PDF |
| GB/T 28708-2012 |
Specification for size selection of seamless and welded steel pipe used in piPINg engineering 管道工程用无缝及焊接钢管尺寸选用规定 |
China National Standards PIN |
English PDF |
| GB 17750-2012 |
Safety code for painting - Safety for dipPINg process 涂装作业安全规程 浸涂工艺安全 |
China National Standards PIN |
English PDF |
| GB/T 28462-2012 |
Woven napPINg fabric for synthetic leather 机织起绒合成革基布 |
China National Standards PIN |
English PDF |
| GB/T 28550-2012 |
PiPINg verification requirement during nuclear power plant commissioning 核电厂调试阶段管道验证要求 |
China National Standards PIN |
English PDF |
| GB/T 28587-2012 |
Inertial measurement unit in the mobile mapPINg system 移动测量系统惯性测量单元 |
China National Standards PIN |
English PDF |
| GB/T 17157-2012 |
Specifications for aerial photogrammetric analytical mapPINg of 1:25 000 1:50 000 1:100 000 topographic maps 1:25 000 1:50 000 1:100 000地形图航空摄影测量解析测图规范 |
China National Standards PIN |
English PDF |
| GB 50764-2012 |
Design code of power of piPINg for power plant 电厂动力管道设计规范 |
China National Standards PIN |
English PDF |
| GB/T 8541-2012 |
Terminology of forging and stamPINg 锻压术语 |
China National Standards PIN |
English PDF |
| GB/T 27863-2011 |
Packaging for dangerous goods - The requirement for impact surface of impact test by dropPINg 危险货物包装 跌落试验冲击台要求 |
China National Standards PIN |
English PDF |
| GB/T 28055-2011 |
Technical standard for hot tapPINg and plugging on steel pipeline 钢制管道带压封堵技术规范 |
China National Standards PIN |
English PDF |
| GB/T 27735-2011 |
CamPINg tents 野营帐篷 |
China National Standards PIN |
English PDF |
| GB/T 27888.3-2011 |
Ship and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage,drain piPINg for vacuum systems 船舶与海上技术 船舶与海上结构物的排水系统 第3部分: 真空系统的卫生水排放及排放管道 |
China National Standards PIN |
English PDF |
| GB/T 27888.2-2011 |
Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage,drain piPINg for gravity systems 船舶与海上技术 船舶与海上结构物的排水系统 第2部分: 重力系统的卫生水排放及排水管道 |
China National Standards PIN |
English PDF |
| GB/T 27866-2011 |
Specification of controlling weld hardness of carbon steel and low alloy steel piPINg and equipment to prevent sulfide stress cracking 控制钢制管道和设备焊缝硬度防止硫化物应力开裂技术规范 |
China National Standards PIN |
English PDF |
| GB/T 21078.3-2011 |
Banking - Personal identification number (PIN) management and security - Part 3: Guidelines for PIN handling in open networks 银行业务 个人识别码的管理与安全 第3部分：开放网络中PIN处理指南 |
China National Standards PIN |
English PDF |
| GB/T 21078.2-2011 |
Banking - Personal identification number management and security - Part 2: Requirements for offline PIN handling in ATM and POS systems 银行业务 个人识别码的管理与安全 第2部分：ATM和POS系统中脱机PIN处理的要求 |
China National Standards PIN |
English PDF |
| GB/T 13207-2011 |
Canned PINeapple 菠萝罐头 |
China National Standards PIN |
English PDF |
| GB/T 27559-2011 |
Rolling bearing - Cylindrical roller bearings for sPINdles of machines 滚动轴承 机床主轴用圆柱滚子轴承 |
China National Standards PIN |
English PDF |
| GB/T 27507-2011 |
Rewind sPINdles for 35mm and 70mm motion picture - Dimensions 35mm和70mm电影倒片轴 尺寸 |
China National Standards PIN |
English PDF |
| GB/T 26960-2011 |
Semi automatic strapPINg machine 半自动捆扎机 |
China National Standards PIN |
English PDF |
| GB/T 26995-2011 |
General specification for rinsing-filling-capPINg machine of plastic bottle 塑料瓶冲洗灌装旋盖机通用技术条件 |
China National Standards PIN |
English PDF |
| GB/T 15801-2011 |
Rules for monitoring and forecast of the cotton PINk bollworm [Pectinophora gossypiella（Saunders）] 棉红铃虫测报技术规范 |
China National Standards PIN |
English PDF |
| GB 50690-2011 |
Code for construction quality acceptance of non-metallic piPINg engineering in petrochemical engineering 石油化工非金属管道工程施工质量验收规范 |
China National Standards PIN |
English PDF |
| GB/T 26564-2011 |
Magnesium aluminate sPINel 镁铝尖晶石 |
China National Standards PIN |
English PDF |
| GB/T 26551-2011 |
Livestock machinery - Fodder chopPINg 畜牧机械 粗饲料切碎机 |
China National Standards PIN |
English PDF |
| GB/T 26693-2011 |
TimekeePINg instruments - Movements - Types, dimensions and nomenclature 计时仪器 手表机心的形状、尺寸和名称 |
China National Standards PIN |
English PDF |
| GB/Z 26588-2011 |
Production technical practice for komatsuna（Japanese mustard sPINach） 小菘菜生产技术规范 |
China National Standards PIN |
English PDF |
| GB/Z 26573-2011 |
Production technical practice for sPINach 菠菜生产技术规范 |
China National Standards PIN |
English PDF |
| GB 26503-2011 |
Rapid prototyPINg machines - Technical requirements for safeguarding 快速成形机床 安全防护技术要求 |
China National Standards PIN |
English PDF |
| GB/T 26514-2011 |
Oil of Melaleuca, alternifolia,terPINen-4-ol type(Tea Tree oil) 互叶白千层(精)油，松油烯-4-醇型(茶树(精)油] |
China National Standards PIN |
English PDF |
| GB/T 26215-2010 |
Capacitors of damPINg absorption circuit for HVDC transmission systems converters 高压直流输电系统换流阀阻尼吸收回路用电容器 |
China National Standards PIN |
English PDF |
| GB/T 26356-2010 |
The requirements of service quality in tourist shopPINg spot 旅游购物场所服务质量要求 |
China National Standards PIN |
English PDF |
| GB 26255.2-2010 |
Mechanical fittings for polyethylene piPINg systems for the supply of gaseous fuels - Part 2: Metal fittings for pipes of nominal outside diameter greaten than 63mm 燃气用聚乙烯管道系统的机械管件 第2部分：公称外径大于63mm的管材用钢塑转换管件 |
China National Standards PIN |
English PDF |
| GB 26255.1-2010 |
Mechanical fittings for polyethylene piPINg systems for the supply of gaseous fuels - Part 1:Metal fittings for pipes of nominal outside diameter less than or equal to 63mm 燃气用聚乙烯管道系统的机械管件 第1部分：公称外径不大于63mm的管材用钢塑转换管件 |
China National Standards PIN |
English PDF |
| GB/T 26316-2010 |
Market,oPINion and social research - Service requirement 市场、民意和社会调查 服务要求 |
China National Standards PIN |
English PDF |
| GB/T 26315-2010 |
Market, oPINion and social research - Vocabulary 市场、民意和社会调查 术语 |
China National Standards PIN |
English PDF |
| GB/T 26242-2010 |
Information technology - General specification of 9-PIN dot matrix printer cores 信息技术 九针点阵式打印机芯通用规范 |
China National Standards PIN |
English PDF |
| GB/T 25926-2010 |
Industrial-process measurement and control instrument panels - Methods of drawing the wiring and piPINg diagrams 工业自动化仪表盘 接线接管图的绘制方法 |
China National Standards PIN |
English PDF |
| GB/T 26002-2010 |
Stainless steel pliable corrugated tubing and fittings used in gas piPINg systems 燃气输送用不锈钢波纹软管及管件 |
China National Standards PIN |
English PDF |
| GB/T 25851.1-2010 |
Mobile cranes - Experimental determination of crane performance Part1: TipPINg loads and radii 流动式起重机 起重机性能的试验测定 第1部分：倾翻载荷和幅度 |
China National Standards PIN |
English PDF |
| GB 50184-2011 |
Code for acceptance of construction quality of industrial metallic piPINg 工业金属管道工程施工质量验收规范 |
China National Standards PIN |
English PDF |
| GB/T 25758.2-2010 |
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: PINhole camera radiographic method 无损检测 工业X射线系统焦点特性 第2部分：针孔照相机射线照相方法 |
China National Standards PIN |
English PDF |
| GB/T 25663-2010 |
CNC movable gantry type multi-sPINdle drilling machine 数控龙门移动多主轴钻床 |
China National Standards PIN |
English PDF |
| GB 25493-2010 |
Rapid prototyPINg machines by laser as processing energy - Technical requirements for safeguarding 以激光为加工能量的快速成形机床 安全防护技术要求 |
China National Standards PIN |
English PDF |
| GB 10395.2-2010 |
Agricultural and forestry machinery - Safety - Part 2：Trailers with tipPINg body 农林机械 安全 第2部分：自卸挂车 |
China National Standards PIN |
English PDF |
| GB/T 18131-2010 |
Standardized shipPINg marks for international trade 国际贸易用标准化运输标志 |
China National Standards PIN |
English PDF |
| GB/T 25632-2010 |
Data interface for software of rapid prototyPINg 快速成形软件数据接口 |
China National Standards PIN |
English PDF |
| GB/T 25457-2010 |
Piano PIN block 钢琴弦轴板 |
China National Standards PIN |
English PDF |
| GB/T 25405-2010 |
Small-size light piPINg water irrigation machines 轻小型管道输水灌溉机组 |
China National Standards PIN |
English PDF |
| GB/T 25391-2010 |
Technical specification of water-pumPINg wind-mill 风力提水机组技术规范 |
China National Standards PIN |
English PDF |
| GB/T 25361.2-2010 |
Internal combustion engines - Piston PINs - Part 2: Inspection measuring principles 内燃机 活塞销 第2部分：检验规则 |
China National Standards PIN |
English PDF |
| GB/T 25361.1-2010 |
Internal combustion engines - Piston PINs - Part 1: General specifications 内燃机 活塞销 第1部分：技术要求 |
China National Standards PIN |
English PDF |
| GB/T 18400.2-2010 |
Test conditions for machining centres - Part 2: Geometric tests for machines with vertical sPINdle or universal heads with vertical primary rotary axis (vertical Z-axis) 加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴) |
China National Standards PIN |
English PDF |
| GB/T 18400.1-2010 |
Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal sPINdle and with accessory heads (horizontal Z -axis) 加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards PIN |
English PDF |
| GB/T 50637-2010 |
Code for design of sPINning process for shell body blank 弹体毛坯旋压工艺设计规范 |
China National Standards PIN |
English PDF |
| GB/T 25257-2010 |
Optical functional films - Determination of warPINg degree 光学功能薄膜 翘曲度测定方法 |
China National Standards PIN |
English PDF |
| GB/T 25243-2010 |
Gansu alPINe fine-wool sheep 甘肃高山细毛羊 |
China National Standards PIN |
English PDF |
| GB/T 25134-2010 |
Optical measurement specification of 3D geometry for forgings/stamPINgs and the dies 锻压制件及其模具三维几何量光学检测规范 |
China National Standards PIN |
English PDF |
| GB 50235-2010 |
Code for construction of industrial metallic piPINg engineering 工业金属管道工程施工规范 |
China National Standards PIN |
English PDF |
| GB 50265-2010 |
Design code for pumPINg station 泵站设计规范 |
China National Standards PIN |
English PDF |
| GB/T 24882-2010 |
Technical regulation for controlling PINe caterpillars 松毛虫防治技术规程 |
China National Standards PIN |
English PDF |
| GB/T 24851-2010 |
Specification for equipPINg and managing of measuring instrument of energy in building material industry 建筑材料行业能源计量器具配备和管理要求 |
China National Standards PIN |
English PDF |
| GB/T 50563-2010 |
Evaluation standard for urban landscaPINg and greening 城市园林绿化评价标准 |
China National Standards PIN |
English PDF |
| GB 50517-2010 |
Code for construction quality acceptance of metallic piPINg in petrochemical engineering 石油化工金属管道工程施工质量验收规范 |
China National Standards PIN |
English PDF |
| GB/T 24776-2009 |
GrouPINg and read-across methods of chemicals 化学物质分组和交叉参照法 |
China National Standards PIN |
English PDF |
| GB 24789-2009 |
General provisions on equipPINg and managing of the measuring instrument of water in organization of water using 用水单位水计量器具配备和管理通则 |
China National Standards PIN |
English PDF |
| GB/T 24797.1-2009 |
Film for wrapPINg rubber bales - Part 1: Butadiene rubber(BR) and styrene-butadiene rubber(SBR) 橡胶包装用薄膜 第1部分：丁二烯橡胶（BR）和苯乙烯－丁二烯橡胶(SBR) |
China National Standards PIN |
English PDF |
| GB/T 24740-2009 |
Technical product documentation - Symbol of mechanical manufacture orientation and clamPINg 技术产品文件 机械加工定位、夹紧符号表示法 |
China National Standards PIN |
English PDF |
| GB/T 24709-2009 |
Shrink wrapPINg machine 收缩包装机 |
China National Standards PIN |
English PDF |
| GB/T 15310.3-2009 |
Form for international trade export documents - Part 3: ShipPINg note 国际贸易出口单证格式 第3部分：装运通知 |
China National Standards PIN |
English PDF |
| GB/T 22101.3-2009 |
Technical specification for evaluating resistance of cotton to disease and insect pests - Part 3: PINk bollworm 棉花抗病虫性评价技术规范 第3部分：红铃虫 |
China National Standards PIN |
English PDF |
| GB/T 24452-2009 |
Plastics piPINg systems for soil and waste discharge (low and high temperature）inside buildings - Chlorinated poly（vinyl chloride）（PVC-C） 建筑物内排污、废水（高、低温）用氯化聚氯乙烯（PVC-C）管材和管件 |
China National Standards PIN |
English PDF |
| GB 24385-2009 |
Surface grinding machines with horizontal grinding wheel sPINdle and reciprocating table - Safeguarding specifications 卧轴矩台平面磨床 安全防护技术条件 |
China National Standards PIN |
English PDF |
| GB/T 24376-2009 |
Textile machinery and accessories - SPINning preparatory and spinning machinery - Main dimensions of coverings for top rollers 纺织机械与附件 纺纱准备和纺纱机械 上罗拉包覆物的主要尺寸 |
China National Standards PIN |
English PDF |
| GB/T 24374-2009 |
Textile machinery and accessories - SPINning machines - Flyer bobbins 纺织机械与附件 纺纱机械 粗纱筒管 |
China National Standards PIN |
English PDF |
| GB/T 24371-2009 |
SPINning preparatory, spinning and doubling (twisting) machinery - Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 纺纱准备、纺纱和并（捻）机械 环锭纺、并、捻锭子用筒管 锥度1∶38和1∶64 |
China National Standards PIN |
English PDF |
| GB/T 24349.5-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 5: Dimensions, tolerances and designation of tubes for continuous sPIN-drawn synthetic filament yarns 纺织机械与附件 圆柱形筒管 第5部分：合成长丝用筒管的尺寸、偏差和标记 |
China National Standards PIN |
English PDF |
| GB/T 24349.2-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 2: Dimensions, tolerances and designation of tubes for open-end sPINning machines 纺织机械与附件 圆柱形筒管 第2部分：自由端纺纱机用筒管的尺寸、偏差和标记 |
China National Standards PIN |
English PDF |
| GB/T 24356-2009 |
Specifications for quality inspection and acceptance of surveying and mapPINg products 测绘成果质量检查与验收 |
China National Standards PIN |
English PDF |
| GB/T 24306-2009 |
Korean PINe kernel 红松种仁 |
China National Standards PIN |
English PDF |
| GB/T 50510-2009 |
Technical code for renewal and renovation of pumPINg station 泵站更新改造技术规范 |
China National Standards PIN |
English PDF |
| GB/T 5019.9-2009 |
Insulating materials based on mica - Part 9: Polyester film mica paper with an epoxy resin binder for single conductor taPINg 以云母为基的绝缘材料 第9部分：单根导线包绕用环氧树脂粘合聚酯薄膜云母带 |
China National Standards PIN |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
