China National Standards

China end GB Standards List

  •  China "end" GB Standards List:
    • Standard  Code Standard Title Standard Class Order
    GB/T 26218.1-2010 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles
    污秽条件下使用的高压绝缘子的选择和尺寸确定 第1部分：定义、信息和一般原则    		 China National Standards
    end
    English PDF
    GB/T 23756.2-2010 Evaluation of electrical endurance of electrical insulation systems - Part 2: Evaluation procedures based on extreme-value distributions
    电气绝缘系统耐电寿命评定 第2部分：在极值分布基础上的评定程序    		 China National Standards
    end
    English PDF
    GB/T 11026.6-2010 Electrical insulating materials - Thermal endurance properties - Part 6: Ageing ovens - Multi-chamber ovens
    电气绝缘材料 耐热性 第6部分：老化烘箱 多室烘箱    		 China National Standards
    end
    English PDF
    GB/T 11026.5-2010 Electrical insulating materials - Thermal endurance properties - Part 5: Ageing ovens - Precision ovens for use up to 300℃
    电气绝缘材料 耐热性 第5部分：老化烘箱 温度达300℃的精密烘箱    		 China National Standards
    end
    English PDF
    GB/T 26180-2010 Method of measuring and specifying colour rendering of light sources
    光源显色性的表示和测量方法    		 China National Standards
    end
    English PDF
    GB/T 26173-2010 Super calendered paper
    超级压光纸    		 China National Standards
    end
    English PDF
    GB 17017-2010 Control criteria for endemic fluorosis areas
    地方性氟中毒病区控制标准    		 China National Standards
    end
    English PDF
    GB/T 25992-2010 Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions
    整体硬质合金和陶瓷直柄球头立铣刀 尺寸    		 China National Standards
    end
    English PDF
    GB 25960-2010 Rules for steam coal blending
    动力配煤规范    		 China National Standards
    end
    English PDF
    GB/T 25962-2010 Standard test method for determining the leakage tendencies of automotive wheel bearing grease under accelerated conditions
    高速条件下汽车轮毂轴承润滑脂漏失量测定法    		 China National Standards
    end
    English PDF
    GB/T 25934.2-2010 Methods for chemical analysis of high purity gold - Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method - Determination of impurity elements contents
    高纯金化学分析方法 第2部分：ICP-MS-标准加入校正-内标法 测定杂质元素的含量    		 China National Standards
    end
    English PDF
    GB/T 14999.7-2010 Test methods for grain sizes，primary dendrite spacing and microshrinkage of superalloy castings
    高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法    		 China National Standards
    end
    English PDF
    GB/T 25670-2010 end mills with brazed angular hardmetal tips
    硬质合金斜齿立铣刀    		 China National Standards
    end
    English PDF
    GB/T 25665-2010 Solid end mills with corner radii and cylindrical shanks made of hard cutting materials - Dimensions
    整体硬切削材料直柄圆弧立铣刀 尺寸    		 China National Standards
    end
    English PDF
    GB 25490-2010 Safety of woodworking machines - Single end tenoning machines with sliding table
    木工机床安全 带移动工作台单头开榫机    		 China National Standards
    end
    English PDF
    GB 25434-2010 Safety requirements of rubber calenders & plastics calenders
    橡胶塑料压延机安全要求    		 China National Standards
    end
    English PDF
    GB/T 25450-2010 Eddy current testing of fuel element end cap weld for PHWR
    重水堆核电厂燃料元件端塞焊缝涡流检测    		 China National Standards
    end
    English PDF
    GB/T 25297.2-2010 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes
    电阻点焊 电极接头，外锥度1:10 第2部分：末端插入式圆柱柄配合    		 China National Standards
    end
    English PDF
    GB/T 6118-2010 end mills - Technical specifications
    立铣刀技术条件    		 China National Standards
    end
    English PDF
    GB/T 6117.3-2010 end mills - Part 3: Milling cutters with 7：24 taper shanks
    立铣刀 第3部分：7:24锥柄立铣刀    		 China National Standards
    end
    English PDF
    GB/T 6117.2-2010 end mills - Part 2: Milling cutters with morse taper shanks
    立铣刀 第2部分：莫氏锥柄立铣刀    		 China National Standards
    end
    English PDF
    GB/T 6117.1-2010 end mills - Part 1: Milling cutters with parallel shanks
    立铣刀 第1部分：直柄立铣刀    		 China National Standards
    end
    English PDF
    GB/T 17390-2010 Recommended practice for electrical submersible pump teardown report
    潜油电泵拆卸报告的编写    		 China National Standards
    end
    English PDF
    GB/T 13578-2010 Rubber and plastics calender
    橡胶塑料压延机    		 China National Standards
    end
    English PDF
    GB/T 25151.4-2010 Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade
    尿素高压设备制造检验方法 第4部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取    		 China National Standards
    end
    English PDF
    GB/T 25151.3-2010 Fabrication and inspection method for high pressure urea equipment - Part 3: Intergranular corrosion tendency test for ultra low-carbon chromated nickel molybdenum austenitic stainless steel of urea grade
    尿素高压设备制造检验方法 第3部分：尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验    		 China National Standards
    end
    English PDF
    GB/T 9065.5-2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 5: Hose fittings with 37°degree flared ends
    液压软管接头 第5部分：37°扩口端软管接头    		 China National Standards
    end
    English PDF
    GB/T 9065.2-2010 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with 24° cone connector ends
    液压软管接头 第2部分：24°锥密封端软管接头    		 China National Standards
    end
    English PDF
    GB/T 232-2010 Metallic materials - Bend test
    金属材料 弯曲试验方法    		 China National Standards
    end
    English PDF
    GB/T 25078.2-2010 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low noise design
    声学 低噪声机器和设备设计实施建议 第2部分：低噪声设计的物理基础    		 China National Standards
    end
    English PDF
    GB/T 25078.1-2010 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning
    声学 低噪声机器和设备设计实施建议 第1部分：规划    		 China National Standards
    end
    English PDF
    GB/T 25023-2010 vehicle end power couplers for locomotives and rolling stocks
    机车车辆车端动力连接器    		 China National Standards
    end
    English PDF
    GB/T 25022-2010 Vehicle end electric communication（control）couplers for locomotives and rolling stocks
    机车车辆车端电气通信（控制）连接器    		 China National Standards
    end
    English PDF
    GB/T 21412.1-2010 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 1: General requirements and recommendations
    石油天然气工业 水下生产系统的设计与操作 第1部分：一般要求和推荐做法    		 China National Standards
    end
    English PDF
    GB/T 24994-2010 Measurement of colloidal charge at paper machine wet end
    造纸湿部溶解电荷量的测定    		 China National Standards
    end
    English PDF
    GB/T 24993-2010 Measurement of Zeta potential at paper machine wet end
    造纸湿部Zeta电位的测定    		 China National Standards
    end
    English PDF
    GB/T 24957-2010 Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement
    冷冻轻烃流体 船上膜式储罐和独立棱柱形储罐的校准 物理测量法    		 China National Standards
    end
    English PDF
    GB/T 24956-2010 Recommended practice for petroleum and natural gas industries - Drill stem design and operating limits
    石油天然气工业 钻柱设计和操作限度的推荐作法    		 China National Standards
    end
    English PDF
    GB/T 24887-2010 Guidelines for the conduct of tests for distinctness, uniformity and stability - Tuliptree（Liriodendron L.）
    植物新品种特异性、一致性、稳定性测试指南 鹅掌楸属    		 China National Standards
    end
    English PDF
    GB/T 9858-2009 Method for determining the folding endurance of photographic film and film base
    片基与胶片耐折度的测定方法    		 China National Standards
    end
    English PDF
    GB/T 9106.1-2009 Packaging containers - Aluminum easy open end and aluminum two - piece can
    包装容器 铝易开盖铝两片罐    		 China National Standards
    end
    English PDF
    GB/T 22264.8-2009 Mounted digital display electric measuring instruments - Part 8: Recommended test methods
    安装式数字显示电测量仪表 第8部分：推荐的试验方法    		 China National Standards
    end
    English PDF
    GB/T 24620-2009 Development of service standards - Recommendations for addressing consumer issues
    服务标准制定导则 考虑消费者需求    		 China National Standards
    end
    English PDF
    GB 16005-2009 Delimitation for the endemic areas of iodine deficiency disorders(IDD)
    碘缺乏病病区划分    		 China National Standards
    end
    English PDF
    GB 17465.4-2009 Appliance couplers for household and similar general purposes - Part 2: Couplers dependent on appliance weight for engagement
    家用和类似用途器具耦合器 第2部分：靠器具重量啮合的耦合器    		 China National Standards
    end
    English PDF
    GB/T 18318.5-2009 Textiles - Determination of bending behaviour - Part 5: Pure bending method
    纺织品 弯曲性能的测定 第5部分：纯弯曲法    		 China National Standards
    end
    English PDF
    GB/T 18318.4-2009 Textiles - Determination of bending behaviour - Part 4: Cantilever beam
    纺织品 弯曲性能的测定 第4部分：悬臂法    		 China National Standards
    end
    English PDF
    GB/T 18318.3-2009 Textiles - Determination of bending behavior - Part 3: Gurley method
    纺织品 弯曲性能的测定 第3部分：格莱法    		 China National Standards
    end
    English PDF
    GB/T 18318.2-2009 Textiles - Determination of bending behaviour - Part 2: Heart loop method
    纺织品 弯曲性能的测定 第2部分：心形法    		 China National Standards
    end
    English PDF
    GB/T 18318.1-2009 Textiles - Determination of bending behavior - Part 1: Incline method
    纺织品 弯曲性能的测定 第1部分：斜面法    		 China National Standards
    end
    English PDF
    GB/T 24349.2-2009 Textile machinery and accessories - Cylindrical tubes - Part 2: Dimensions, tolerances and designation of tubes for open-end spinning machines
    纺织机械与附件 圆柱形筒管 第2部分：自由端纺纱机用筒管的尺寸、偏差和标记    		 China National Standards
    end
    English PDF
    GB/T 24349.1-2009 Textile machinery and accessories - Cylindrical tubes - Part 1: Recommended main dimensions
    纺织机械与附件 圆柱形筒管 第1部分：主要尺寸推荐值    		 China National Standards
    end
    English PDF
    GB/T 5953.2-2009 Steel wire for cold heading and cold forging - Part 2: Not intended for heat treatment
    冷镦钢丝 第2部分：非热处理型冷镦钢丝    		 China National Standards
    end
    English PDF
    GB/T 5953.1-2009 Steel wire for cold heading and cold forging - Part 1: Intended for heat treatment
    冷镦钢丝 第1部分：热处理型冷镦钢丝    		 China National Standards
    end
    English PDF
    GB/T 16578.2-2009 Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method
    塑料 薄膜和薄片 耐撕裂性能的测定 第2部分：埃莱门多夫（Elmendor）法    		 China National Standards
    end
    English PDF
    GB/T 24125-2009 Stainless steel fibre and cotton, polyester blended grey yarns
    不锈钢纤维与棉涤混纺本色纱线    		 China National Standards
    end
    English PDF
    GB/T 24110-2009 Safety requirements and tests for caps and end closures of writing and marking instruments for import and export
    进出口笔类产品笔帽和端盖安全要求及测试方法    		 China National Standards
    end
    English PDF
    GB/T 11185-2009 Paints and varnishes - Bend test(conical mandrel)
    色漆和清漆 弯曲试验(锥形轴)    		 China National Standards
    end
    English PDF
    GB/T 23838-2009 Determination of suspended solids of industrial circulating cooling water
    工业循环冷却水中悬浮固体的测定    		 China National Standards
    end
    English PDF
    GB/Z 23756.1-2009 Evaluation of electrical endurance of electrical insulation systems - Part 1: General considerations and evaluation procedures based on normal distributions
    电气绝缘系统耐电性评定 第1部分：在正态分布基础上的评定程序和一般原理    		 China National Standards
    end
    English PDF
    GB/T 23619-2009 Guidelines for quarantine surveillance of bactrocera dorsalis (Hendel)
    柑桔小实蝇疫情监测规程    		 China National Standards
    end
    English PDF
    GB/T 14834-2009 Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals
    硫化橡胶或热塑性橡胶 与金属粘附性及对金属腐蚀作用的测定    		 China National Standards
    end
    English PDF
    GB/T 5326-2009 Combed printed or dyed polyester/cotton blended fabrics
    精梳涤棉混纺印染布    		 China National Standards
    end
    English PDF
    GB/T 5324-2009 Combed polyester/cotton blended grey yarn
    精梳涤棉混纺本色纱线    		 China National Standards
    end
    English PDF
    GB 23525-2009 Safety technical criterion for personal board-type sling equipment for suspending work
    座板式单人吊具悬吊作业安全技术规范    		 China National Standards
    end
    English PDF
    GB/T 23380-2009 Determination of carbendazim residues in fruits and vegetables - HPLC method
    水果、蔬菜中多菌灵残留的测定 高效液相色谱法    		 China National Standards
    end
    English PDF
    GB/T 22838.9-2009 Determination of physical characteristics for cigarettes and filter rods - Part 9: Cigarettes loose end
    卷烟和滤棒物理性能的测定 第9部分：卷烟空头    		 China National Standards
    end
    English PDF
    GB/T 22838.16-2009 Determination of physical characteristics for cigarettes and filter rods - Part 16: Cigarettes - Determination of loss of tobacco from the ends - Method using a rotating cylindrical cage
    卷烟和滤棒物理性能的测定 第16部分：卷烟 端部掉落烟丝的测定 旋转笼法    		 China National Standards
    end
    English PDF
    GB/T 3917.1-2009 Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)
    纺织品 织物撕破性能 第1部分：冲击摆锤法撕破强力的测定    		 China National Standards
    end
    English PDF
    GB/T 23326-2009 Stainless steel fibers and cotton-polyester blended grey fabric with electromagnetic shielding performance
    不锈钢纤维与棉涤混纺电磁波屏蔽本色布    		 China National Standards
    end
    English PDF
    GB/T 4909.6-2009 Test methods for bare wires - Part 6: Bend test - Single bend test
    裸电线试验方法 第6部分：弯曲试验 单向弯曲    		 China National Standards
    end
    English PDF
    GB/T 4909.5-2009 Test methods for bare wires - Part 5: Bend test - Reverse bend test
    裸电线试验方法 第5部分：弯曲试验 反复弯曲    		 China National Standards
    end
    English PDF
    GB/T 19520.15-2009 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units
    电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分：基于连接器的插箱和插件的接口尺寸    		 China National Standards
    end
    English PDF
    GB/T 19290.5-2009 Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack
    发展中的电子设备构体机械结构模数序列 第2-3部分：分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸    		 China National Standards
    end
    English PDF
    GB 23242-2009 Food processing machinery - Food processors and blenders - Safety and hygiene requirements
    食品加工机械 食物切碎机和搅拌机 安全和卫生要求    		 China National Standards
    end
    English PDF
    GB/T 1943-2009 Method for determination of the modulus of elasticity in compression perpendicular to grain of wood
    木材横纹抗压弹性模量测定方法    		 China National Standards
    end
    English PDF
    GB/T 1939-2009 Method of testing in compression perpendicular to grain of wood
    木材横纹抗压试验方法    		 China National Standards
    end
    English PDF
    GB/T 1936.2-2009 Method for determination of the modulus of elasticity in static bending of wood
    木材抗弯弹性模量测定方法    		 China National Standards
    end
    English PDF
    GB/T 1936.1-2009 Method of testing in bending strength of wood
    木材抗弯强度试验方法    		 China National Standards
    end
    English PDF
    GB/T 14017-2009 Method of testing in tensile strength perpendicular to grain of wood
    木材横纹抗拉强度试验方法    		 China National Standards
    end
    English PDF
    GB 5920-2008 Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers
    汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能    		 China National Standards
    end
    English PDF
    GB/T 22689-2008 Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges
    测定固体绝缘材料相对耐表面放电击穿能力的推荐试验方法    		 China National Standards
    end
    English PDF
    GB/T 18029.23-2008 Wheelchairs - Part 23: Requirements and test methods for attendant-operated stair-climbing devices
    轮椅车 第23部分：护理者操作的爬楼梯装置的要求和测试方法    		 China National Standards
    end
    English PDF
    GB/T 22972-2008 Determination of thiabendazole, albendazole, fenbendazole, oxfendazole and febantel residues in milk and milk powder - HPLC-MS-MS method
    牛奶和奶粉中噻苯达唑、阿苯达唑、芬苯达唑、奥芬达唑、苯硫氨酯残留量的测定 液相色谱-串联质谱法    		 China National Standards
    end
    English PDF
    GB 4706.72-2008 Household and similar electrical appliances - Safety - Particular requirements for commercial dispensing appliances and vending machines
    家用和类似用途电器的安全 商用售卖机的特殊要求    		 China National Standards
    end
    English PDF
    GB/T 4393-2008 Open end wrenches, box wrenches and combination wrenches - Technical specifications
    呆扳手、梅花扳手、两用扳手 技术规范    		 China National Standards
    end
    English PDF
    GB/T 4391-2008 Double-ended wrenches - Size pairing
    双头扳手 对边尺寸组配    		 China National Standards
    end
    English PDF
    GB/T 4388-2008 Types of open-end wrenches, box wrenches and combination wrenches
    呆扳手、梅花扳手、两用扳手的型式    		 China National Standards
    end
    English PDF
    GB/T 23144-2008 Paper and board - Determination of bending stiffness by static methods - General principle
    纸和纸板 静态弯曲挺度的测定 通用原理    		 China National Standards
    end
    English PDF
    GB/T 22906.6-2008 Test of cores - Part 6: Determination of bending strength by three-point method
    纸芯的测定 第6部分：弯曲强度的测定（三点法）    		 China National Standards
    end
    English PDF
    GB/T 22896-2008 Paper and board - Determination of curl - Single vertically suspended test piece
    纸和纸板 卷曲的测定 单个垂直悬挂试样法    		 China National Standards
    end
    English PDF
    GB/T 22777-2008 Numeral information calendars
    数码信息历    		 China National Standards
    end
    English PDF
    GB/T 22772-2008 Mechanical clocks with pendulum
    机械摆钟    		 China National Standards
    end
    English PDF
    GB/T 15825.5-2008 Sheet metal formability and test methods - Part 5: Bending test
    金属薄板成形性能与试验方法 第5部分：弯曲试验    		 China National Standards
    end
    English PDF
    GB/T 22565-2008 Metallic materials - Sheet and strip - Method for springback evaluation in stretch bending
    金属材料 薄板和薄带 拉弯回弹评估方法    		 China National Standards
    end
    English PDF
    GB/T 22542.1-2008 Instrument for dam monitoring - Pendulum coordinometer - Part 1: Step motor type pendulum coordinometer
    大坝监测仪器 垂线坐标仪 第1部分：步进电机式垂线坐标仪    		 China National Standards
    end
    English PDF
    GB/T 22566.1-2008 Electrical insulation system - Electrical stresses produced by repetitive impulses - Part 1: General method of evaluation of electrical endurance
    电气绝缘系统 重复脉冲产生的电应力 第1部分：电老化评定的通用方法    		 China National Standards
    end
    English PDF
    GB/T 10826.4-2008 Fuel injection equipment - Vocabulary - Part 4: High-pressure pipes and end-connections
    燃油喷射装置 词汇 第4部分：高压油管和管端连接件    		 China National Standards
    end
    English PDF
    GB/T 22470-2008 General requirements for environmentally friendly moulding compounds for electrical purpose
    电气用环保型模塑料通用要求    		 China National Standards
    end
    English PDF
    GB/T 2900.13-2008 Electrotechnical terminology - Dependability and quality of service
    电工术语 可信性与服务质量    		 China National Standards
    end
    English PDF

    Find out:500Items   |  To Page of: First -Previous-Next -Last  | 1 2 3

    　

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.gbstandards.org
    China National Standards