Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 17737.105-2018 |
Coaxial communication cables—Part 1-105: Electrical test methods—Test for withstand voltage of cable dielectric 同轴通信电缆 第1-105部分：电气试验方法 电缆介质的耐电压试验 |
China National Standards with |
 English PDF |
| GB/T 17737.106-2018 |
Coaxial communication cables—Part 1-106: Electrical test methods—Test for withstand voltage of cable sheath 同轴通信电缆 第1-106部分：电气试验方法 电缆护套的耐电压试验 |
China National Standards with |
English PDF |
| GB/T 11313.15-2018 |
Radio frequency connectors—Part 15: R.F.coaxial connectors with inner diameter of outer conductor 4.13mm(0.163in), characteristic impedance 50 ohms, screw coupling (Type SMA) 射频连接器 第15部分:外导体内径为4.13mm(0.163in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(SMA型) |
China National Standards with |
English PDF |
| GB/T 34926-2017 |
Corrugated copper metallic sheath mica tape mineral insulated cables and their terminations with a rated voltage up to and including 0.6/1kV 额定电压0.6/1kV及以下云母带矿物绝缘波纹铜护套电缆及终端 |
China National Standards with |
English PDF |
| GB/T 34876-2017 |
Vacuum technology—Vacuum gauges—Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge 真空技术 真空计 与标准真空计直接比较校准结果的不确定度评定 |
China National Standards with |
English PDF |
| GB/T 34873-2017 |
Vacuum gauges—Calibration by direct comparison with a reference gauge 真空计 与标准真空计直接比较校准 |
China National Standards with |
English PDF |
| GB/T 19443-2017 |
Insulators for overhead lines with a nominal voltage above 1500V—Ceramic or glass insulator units for d.c. systems—Definitions,test methods and acceptance criteria 标称电压高于1500V的架空线路用绝缘子 直流系统用瓷或玻璃绝缘子串元件 定义、试验方法及接收准则 |
China National Standards with |
English PDF |
| GB/T 34939.1-2017 |
D.C.±800kV composite post insulator—Part 1: Composite post insulator with resin impregnated glass fibers solid core ±800kV直流支柱复合绝缘子 第1部分：环氧玻璃纤维实心芯体复合绝缘子 |
China National Standards with |
English PDF |
| GB/T 34937-2017 |
Insulators for overhead lines—Composite suspension and tension insulators for d.c.systems with a nominal voltage greater than 1500 V—Definitions, test methods and acceptance criteria 架空线路绝缘子 标称电压高于1500 V直流系统用悬垂和耐张复合绝缘子 定义、试验方法及接收准则 |
China National Standards with |
English PDF |
| GB/T 34956-2017 |
Atmospheric radiation effects—Accommodation of atmospheric radiation effects via single event effects within avionics electronic equipment 大气辐射影响 航空电子设备单粒子效应防护设计指南 |
China National Standards with |
English PDF |
| GB/T 19812.3-2017 |
Plastic equipment for water saving irrigation—Part 3：Drip pipe and drip tape inlaid with emitters inside 塑料节水灌溉器材 第3部分：内镶式滴灌管及滴灌带 |
China National Standards with |
English PDF |
| GB/T 19812.1-2017 |
Plastic equipment for water saving irrigation—Part 1：Drip tape with labyrinth on one side 塑料节水灌溉器材 第1部分：单翼迷宫式滴灌带 |
China National Standards with |
English PDF |
| GB/T 34724-2017 |
Accelerated method of determining corrosion rate of metal in contact with preservative treated wood 接触防腐木材的金属腐蚀速率加速测定方法 |
China National Standards with |
English PDF |
| GB/T 34722-2017 |
Surface decorated plywood and blockboard with paper impregnated thermosetting resins 浸渍胶膜纸饰面胶合板和细木工板 |
China National Standards with |
English PDF |
| GB/T 34726-2017 |
Method of determining corrosion rate of metal in contact with wood preservative 木材防腐剂对金属的腐蚀速率测定方法 |
China National Standards with |
English PDF |
| GB/T 34736-2017 |
Detection of jaagsiekte sheep retrovirus with dot blotting hybridization 绵羊肺腺瘤病毒核酸斑点杂交检测技术 |
China National Standards with |
English PDF |
| GB/T 34740-2017 |
Diagnostic methods for animal rabies diagnosis with direct immunofluorescence assay 动物狂犬病直接免疫荧光诊断方法 |
China National Standards with |
English PDF |
| GB/T 20203-2017 |
Technical specification for irrigation projects with pipe conveyance 管道输水灌溉工程技术规范 |
China National Standards with |
English PDF |
| GB/T 34352-2017 |
Cleaning guide for the boiler and system with organic heat transfer fluids 有机热载体锅炉及系统清洗导则 |
China National Standards with |
English PDF |
| GB/T 34597-2017 |
Passenger cars—Stopping distance at straight-line braking with ABS—Open loop test method 乘用车 防抱制动系统(ABS)直线制动距离 开环试验方法 |
China National Standards with |
English PDF |
| GB/T 34364-2017 |
Specification for design of case with laminated veneer lumber (LVL) 单板层积材包装箱设计规范 |
China National Standards with |
English PDF |
| GB/T 34508-2017 |
Additive manufacturing with TC4 alloys powder by bed electron beam melting 粉床电子束增材制造TC4合金材料 |
China National Standards with |
English PDF |
| GB/T 34609.1-2017 |
Method for chemical analysis of rhodium compounds—Part 1: Determination of rhodium content—Gravimetric method with hexaammine cobalt nitrate 铑化合物化学分析方法 第1部分：铑量的测定 硝酸六氨合钴重量法 |
China National Standards with |
English PDF |
| GB/T 10574.12-2017 |
Methods for chemical analysis of tin-lead solders—Part 12：Determination of sulfur content—High frequency combustion with infrared absorption method 锡铅焊料化学分析方法 第12部分：硫量的测定 高频燃烧红外吸收光谱法 |
China National Standards with |
English PDF |
| GB/T 34387-2017 |
General function test method for valves used with refrigerant 制冷剂用阀门通用性能试验方法 |
China National Standards with |
English PDF |
| GB/T 14048.13-2017 |
Low-voltage switchgear and controlgear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behaviour under fault conditions (PDDB) 低压开关设备和控制设备 第5-3部分：控制电路电器和开关元件 在故障条件下具有确定功能的接近开关（PDDB）的要求 |
China National Standards with |
English PDF |
| GB/T 28807.3-2017 |
Railway applications—Compatibility between rolling stock and train detection systems—Part 3:Compatibility with axle counters 轨道交通 机车车辆和列车检测系统的兼容性 第3部分：与计轴器的兼容性 |
China National Standards with |
English PDF |
| GB/T 28807.2-2017 |
Railway applications—Compatibility between rolling stock and train detection systems—Part 2: Compatibility with track circuits 轨道交通 机车车辆和列车检测系统的兼容性 第2部分：与轨道电路的兼容性 |
China National Standards with |
English PDF |
| GB/T 5019.12-2017 |
Specification for insulating materials based on mica— Part 12：Glass fabric backup epoxy dry mica tape with high porosity 以云母为基的绝缘材料 第12部分：高透气性玻璃布补强环氧少胶云母带 |
China National Standards with |
English PDF |
| GB/T 20897.3-2017 |
Inflatable boats—Part3: Boats with a maximum motor power rating of 15 kW and greater 充气艇 第3部分：发动机最大额定功率为15 kW及以上的艇 |
China National Standards with |
English PDF |
| GB/T 4698.8-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 8：Determination of aluminum content—Separation with sodium hydroxide-EDTA complex-metric titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第8部分：铝量的测定 碱分离-EDTA络合滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards with |
English PDF |
| GB/T 32076.8-2017 |
High-strength structural bolting assemblies for preloading—Part 8: Torshear type bolt with cup head,and nut assemblies 预载荷高强度栓接结构连接副 第8部分：扭剪型圆头螺栓和螺母连接副 |
China National Standards with |
English PDF |
| GB/T 1819.10-2017 |
Methods for chemical analysis of tin concentrates—Part 10: Determination of sulfur content—High frequency combustion with infrared absorption method and potassium iodate titrimetric method 锡精矿化学分析方法 第10部分：硫量的测定 高频感应炉燃烧红外吸收法和碘酸钾滴定法 |
China National Standards with |
English PDF |
| GB/T 5318-2017 |
Sintered metal materials（excluding hardmetals） without notch impact test piece 烧结金属材料（不包括硬质合金）无切口冲击试样 |
China National Standards with |
English PDF |
| GB/T 25026-2017 |
Structure,main size and basic parameters of one piece glass-lined steel vessels with agitator 搪玻璃闭式搅拌容器型式、主要尺寸及基本参数 |
China National Standards with |
English PDF |
| GB/T 34176-2017 |
Chemical analysis methods for determination of Fe2+ and Fe3+ in refractory products by the spectral photometric method with 1,10-phenanthroline 邻二氮杂菲分光光度法测定耐火材料中的二价和三价铁离子化学分析方法 |
China National Standards with |
English PDF |
| GB/T 34189-2017 |
Portland cement used for pipe pile without high pressure steam 免压蒸管桩硅酸盐水泥 |
China National Standards with |
English PDF |
| GB/T 3883.306-2017 |
Safety of motor-operated hand-held,transportable and garden tools―Part 3: Particular requirements for transportable diamond drills with liquid systems 手持式、可移式电动工具和园林工具的安全 第3部分：可移式带液源金刚石钻的专用要求 |
China National Standards with |
English PDF |
| GB/T 33600-2017 |
Sandwich composite wallboard with porous concrete using metal tailings 金属尾矿多孔混凝土夹芯系统复合墙板 |
China National Standards with |
English PDF |
| GB/T 33967-2017 |
Wire rods for conversion to wire without intermediate heat treatment 免铅浴淬火钢丝用热轧盘条 |
China National Standards with |
English PDF |
| GB/T 33969-2017 |
Technical specification for injecting pulverized coal with oxygen-enriched into blast furnace 高炉富氧喷煤技术规范 |
China National Standards with |
English PDF |
| GB/T 33968-2017 |
Hot rolled steel sections with improved weldability 改善焊接性能热轧型钢 |
China National Standards with |
English PDF |
| GB/T 26949.15-2017 |
Industrial trucks—Verification of stability—Part 15: Counterbalanced trucks with articulated steering 工业车辆 稳定性验证 第15部分：带铰接转向的平衡重式叉车 |
China National Standards with |
English PDF |
| GB/T 15670.21-2017 |
Toxicological test methods for pesticides registration—Part 21: Unscheduled DNA synthesis (UDS) test with mammalian liver cells in vivo 农药登记毒理学试验方法 第21部分：体内哺乳动物肝细胞程序外DNA合成(UDS)试验 |
China National Standards with |
English PDF |
| GB/T 16462.3-2017 |
Test conditions for numerically controlled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分：倒置立式机床几何精度检验 |
China National Standards with |
English PDF |
| GB/T 16462.2-2017 |
Test conditions for numerically controlled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心检验条件 第2部分：立式机床几何精度检验 |
China National Standards with |
English PDF |
| GB/T 73-2017 |
Slotted set screws with flat point 开槽平端紧定螺钉 |
China National Standards with |
English PDF |
| GB/T 9074.18-2017 |
Tapping screw and washer assemblies with plain washers 自攻螺钉和平垫圈组合件 |
China National Standards with |
English PDF |
| GB/T 32076.9-2017 |
High-strength structural bolting assemblies for preloading—Part 9: Torshear type bolt with hexagon head with large width across flats，and nut assemblies 预载荷高强度栓接结构连接副 第9部分：扭剪型大六角头螺栓和螺母连接副 |
China National Standards with |
English PDF |
| GB/T 33986-2017 |
Information description of product for electronic commerce transaction—Plastic product in contact with foodstuff 电子商务交易产品信息描述 食品接触塑料制品 |
China National Standards with |
English PDF |
| GB/T 31465.6-2017 |
Road vehicles—Fuse-links—Part 6: Fuse-links with bolt-in contacts with high voltage 道路车辆 熔断器 第6部分：螺栓式高压熔断器 |
China National Standards with |
English PDF |
| GB/T 31465.7-2017 |
Road vehicles—Fuse-links—Part 7: Fuse-links with shortened tabs 道路车辆 熔断器 第7部分：短引脚式熔断器 |
China National Standards with |
English PDF |
| GB/T 33682-2017 |
General microganism identification method with with matrix-assisted laster desorption/ionization time of flight mass spectrometry 基质辅助激光解析电离飞行时间质谱鉴别微生物方法通则 |
China National Standards with |
English PDF |
| GB/T 9160.1-2017 |
Rolling bearings—Accessories—Part 1:Adapter sleeve assemblies and withdrawal sleeves 滚动轴承 附件 第1部分：紧定套和退卸衬套 |
China National Standards with |
English PDF |
| GB/T 5015-2017 |
Gear coupling with elastomer 弹性柱销齿式联轴器 |
China National Standards with |
English PDF |
| GB/T 26949.13-2017 |
Industrial trucks—Verification of stability—Part 13: Rough-terrain trucks with mast 工业车辆 稳定性验证 第13部分：带门架的越野型叉车 |
China National Standards with |
English PDF |
| GB/T 2878.3-2017 |
Connections for hydraulic fluid power—Ports and stud ends with metric threads and O-ring sealing—Part 3: light-duty stud ends (L series) 液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第3部分：轻型螺柱端（L系列） |
China National Standards with |
English PDF |
| GB/T 4323-2017 |
Pin coupling with elastic sleeve 弹性套柱销联轴器 |
China National Standards with |
English PDF |
| GB/T 5272-2017 |
Coupling with elastic spider 梅花形弹性联轴器 |
China National Standards with |
English PDF |
| GB/T 2662-2017 |
Clothes with fillings 棉服装 |
China National Standards with |
English PDF |
| GB/T 5687.4-2016 |
Nitrogen-bearing ferrochromium and nitride ferrochrome with high nitrogen content—Determination of nitrogen content—The distillation-neutralization titration method 氮化铬铁和高氮铬铁 氮含量的测定 蒸馏-中和滴定法 |
China National Standards with |
English PDF |
| GB/T 33510-2017 |
Conveyor belts with heat-resistant rubber covers—Heat resistance of covers—Requirements and test methods 耐热橡胶覆盖层输送带 覆盖层的耐热性 要求和试验方法 |
China National Standards with |
English PDF |
| GB/T 33524.1-2017 |
Modular taper interface with ball track system—Part 1: Dimensions and designation of shanks 带有钢球拉紧系统的模块圆锥接口 第1部分：柄部尺寸和标记 |
China National Standards with |
English PDF |
| GB/T 33524.2-2017 |
Modular taper interface with ball track system—Part 2: Dimensions and designation of receivers 带有钢球拉紧系统的模块圆锥接口 第2部分：安装孔尺寸和标记 |
China National Standards with |
English PDF |
| GB/T 1132-2017 |
Machine chucking reamers with cylindrical shanks and Morse taper shanks 直柄和莫氏锥柄机用铰刀 |
China National Standards with |
English PDF |
| GB/T 51232-2016 |
Technical standard for assembled buildings with steel-structure 装配式钢结构建筑技术标准 |
China National Standards with |
English PDF |
| GB/T 51231-2016 |
Technical standard for assembled buildings with concrete structure 装配式混凝土建筑技术标准 |
China National Standards with |
English PDF |
| GB/T 34125-2017 |
General specification for outdoor cabinet with relaying protection and security automatic equipment of power system 电力系统继电保护及安全自动装置户外柜通用技术条件 |
China National Standards with |
English PDF |
| GB/T 9074.32-2017 |
Bolt or screw and washer assemblies with conical spring washers 螺栓或螺钉和锥形弹性垫圈组合件 |
China National Standards with |
English PDF |
| GB/T 4243-2017 |
Long fluted machine reamers with Morse taper shanks 莫氏锥柄长刃机用铰刀 |
China National Standards with |
English PDF |
| GB/T 4247-2017 |
Machine bridge reamers with Morse taper shanks 莫氏锥柄机用桥梁铰刀 |
China National Standards with |
English PDF |
| GB/T 18015.7-2017 |
Multicore and symmetrical pair/quad cables for digital communications—Part 7: Symmetrical pair/quad cables with transmission characteristics up to 1 200MHz—Sectional specification for digital and analog communication cables 数字通信用对绞或星绞多芯对称电缆 第7部分：具有1200MHz及以下传输特性的对绞或星绞对称电缆 数字及模拟通信电缆分规范 |
China National Standards with |
English PDF |
| GB/T 18015.8-2017 |
Multicore and symmetrical pair/quad cables for digital communications—Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1200MHz－Work area wiring sectional specification 数字通信用对绞或星绞多芯对称电缆 第8部分：具有1200MHz及以下传输特性的对绞或星绞对称电缆 工作区布线电缆分规范 |
China National Standards with |
English PDF |
| GB/T 35459-2017 |
Men’s clothing with chinese stand collar 中式立领男装 |
China National Standards with |
English PDF |
| GB/T 35259-2017 |
Textiles—Tests for colour fastness—Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant（CMCCON02） 纺织品 色牢度试验 试样颜色随照明体变化的仪器评定方法（CMCCON02） |
China National Standards with |
English PDF |
| GB/T 22794-2017 |
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses 家用和类似用途的不带和带过电流保护的F型和B型剩余电流动作断路器 |
China National Standards with |
English PDF |
| GB/T 15102-2017 |
Surface decorated fiberboard and particleboard with paper impregnated thermosetting resins 浸渍胶膜纸饰面纤维板和刨花板 |
China National Standards with |
English PDF |
| GB/T 35480-2017 |
Fastener—Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification 紧固件 螺栓、螺钉和螺柱预涂微胶囊型粘合层技术条件 |
China National Standards with |
English PDF |
| GB/T 35544-2017 |
Fully-wrapped carbon fiber reinforced cylinders with an aluminum liner for the on-board storage of compressed hydrogen as a fuel for land vehicles 车用压缩氢气铝内胆碳纤维全缠绕气瓶 |
China National Standards with |
English PDF |
| GB/T 34903.1-2017 |
Petroleum,petrochemical and natural gas industries—Non-metallic materials in contact with media related to oil and gas production—Part 1:Thermoplastics 石油、石化与天然气工业 与油气开采相关介质接触的非金属材料 第1部分：热塑性塑料 |
China National Standards with |
English PDF |
| GB/T 13681.2-2017 |
Hexagon weld nuts with flange 焊接六角法兰面螺母 |
China National Standards with |
English PDF |
| GB/T 18831-2017 |
Safety of machinery—Interlocking devices associated with guards—Principles for design and selection 机械安全 与防护装置相关的联锁装置 设计和选择原则 |
China National Standards with |
English PDF |
| GB/T 5099.1-2017 |
Seamless steel gas cylinders—Part 1: Quenched and tempered steel cylinders with tensile strength less than 1100 MPa 钢质无缝气瓶 第1部分：淬火后回火处理的抗拉强度小于1100MPa的钢瓶 |
China National Standards with |
English PDF |
| GB/T 35478-2017 |
Fastener—Steel bolts,screws and studs with polyamide locking pre-coating technical specification 紧固件 螺栓、螺钉和螺柱预涂聚酰胺锁紧层技术条件 |
China National Standards with |
English PDF |
| GB/T 35499-2017 |
Code for quality and technology of anticorrosive construction with furan resin 呋喃树脂耐蚀作业质量技术规范 |
China National Standards with |
English PDF |
| GB/T 35481-2017 |
Hexalobular bolts with flange 六角花形法兰面螺栓 |
China National Standards with |
English PDF |
| GB/T 35730-2017 |
General design requirements of pressurized water reactor nuclear power plants with passive safety systems 非能动安全系统压水堆核电厂总设计要求 |
China National Standards with |
English PDF |
| GB/T 35479-2017 |
Superabrasive products—Grinding tools with diamond or cubic boron nitride—General survey and designation 超硬磨料制品 金刚石或立方氮化硼磨具 形状总览和标记 |
China National Standards with |
English PDF |
| GB/T 35358.1-2017 |
Inlet air cleaning equipment for vehicle engines and compressors—Part 1: Fractional efficiency testing with fine particles(0.3 μm to 5 μm optical diameter) 汽车发动机和压缩机进气空气滤清装置 第1部分：细颗粒分级效率测试(0.3μm到5μm) |
China National Standards with |
English PDF |
| GB/T 35358.2-2017 |
Inlet air cleaning equipment for vehicle engines and compressors—Part 2: Fractional efficiency testing with coarse particles(5 μm to 40 μm optical diameter) 汽车发动机和压缩机进气空气滤清装置 第2部分：粗颗粒分级效率测试(5μm到40μm) |
China National Standards with |
English PDF |
| GB/T 24131.2-2017 |
Rubber,raw—Determination of volatile-matter content—Part 2:Thermogravimetric methods using an automatic analyser with an infrared drying unit 生橡胶 挥发分含量的测定 第2部分：带红外线干燥单元的自动分析仪加热失重法 |
China National Standards with |
English PDF |
| GB/T 35508-2017 |
Regional cathodic protection within station 场站内区域性阴极保护 |
China National Standards with |
English PDF |
| GB/T 34127-2017 |
Fixed energy high intensity proton cyclotron within the range of 10 MeV～20 MeV 10 MeV～20 MeV范围内固定能量强流质子回旋加速器 |
China National Standards with |
English PDF |
| GB/T 290-2017 |
Rolling bearings－Needle roller bearings with drawn cup and without inner ring－Boundary dimensions 滚动轴承 无内圈冲压外圈滚针轴承 外形尺寸 |
China National Standards with |
English PDF |
| GB/T 34903.2-2017 |
Petroleum,petrochemical and natural gas industries—Non-metallic materials in contact with media related to oil and gas production—Part 2:Elastomers 石油、石化与天然气工业 与油气开采相关介质接触的非金属材料 第2部分：弹性体 |
China National Standards with |
English PDF |
| GB/T 33380-2016 |
Rubber hoses with large diameter—Tensile test 大型橡胶软管组合件 拉伸试验 |
China National Standards with |
English PDF |
| GB/T 20846-2016 |
Shipbuilding—Ventilation and air-treatment of galleys and pantries with cooking appliances 造船 厨房和具有烹调设备的配餐室的通风及空气处理 |
China National Standards with |
English PDF |
| GB/T 14987-2016 |
Iron-Nickel soft magnetic alloy cold-rolled strips with high hardness and high electrical resistance 高硬度高电阻铁镍软磁合金冷轧带材 |
China National Standards with |
English PDF |
| GB/T 6481-2016 |
Hollow hexagonal drill rods with taperd connection for rock drilling 凿岩用锥体连接中空六角形钎杆 |
China National Standards with |
English PDF |
| GB/T 33191-2016 |
Technical conditions for computer control and interactive communication with vehicle safety inspection equipment 机动车安全技术检测仪器设备计算机控制与通信技术条件 |
China National Standards with |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
