Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 6683.3-2023 |
Petroleum and related products—Measurement methods and precision of results—Part 3: Monitoring and verification of published precision data for test methods {译} 石油及相关产品 测量方法与结果精密度 第3部分：试验方法已发布精密度数据的监测和验证 |
China National Standards —Part |
 English PDF |
| GB/T 28826.3-2023 |
Information technology—Common biometric interchange format framework—Part 3: Maintainer format specification {译} 信息技术 公用生物特征识别交换格式框架 第3部分：维护者格式规范 |
China National Standards —Part |
English PDF |
| GB/T 39139.2-2023 |
Shale gas—Environmental protection—Part 2: Recommended practices for environmental protection in production operations {译} 页岩气 环境保护 第2部分：生产作业环境保护推荐作法 |
China National Standards —Part |
English PDF |
| GB/T 32800.1-2023 |
Hand-held non-electric power tools—Safety requirements—Part 1: Assembly power tools for non-threaded structural fasteners {译} 手持式非电类动力工具 安全要求 第1部分：非螺纹结构紧固件用装配动力工具 |
China National Standards —Part |
English PDF |
| GB/T 30268.3-2023 |
Information technology—Conformity testing for the biometric application programming interface (BioAPI)—Part 3: Test assertions for the BioAPI framework {译} 信息技术 生物特征识别应用程序接口（BioAPI）的符合性测试 第3部分：BioAPI框架的测试断言 |
China National Standards —Part |
English PDF |
| GB/T 26949.4-2022 |
Industrial vehicles—Verification of stability—Part 4: Pallet stackers, double-deck stackers and orderers with a lift height not greater than 1 200 mm at the operator's position {译} 工业车辆 稳定性验证 第4部分：托盘堆垛车、双层堆垛车和操作者位置起升高度不大于1 200 mm的拣选车 |
China National Standards —Part |
English PDF |
| GB/T 20564.6-2022 |
High-strength cold-rolled steel sheets and strips for automobiles—Part 6: Transformation-induced plasticity steels {译} 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards —Part |
English PDF |
| GB/T 40711.1-2022 |
Evaluation method for energy-saving effect of out-of-cycle technologies/devices for passenger cars—Part 1: Shift reminder device {译} 乘用车循环外技术/装置节能效果评价方法 第1部分：换挡提醒装置 |
China National Standards —Part |
English PDF |
| GB/T 22459.6-2022 |
Refractory mortars—Part 6: Determination of moisture content of ready-mixed mortars 耐火泥浆 第6部分：预搅拌泥浆含水量试验方法 |
China National Standards —Part |
English PDF |
| GB/T 22459.5-2022 |
Refractory mortars—Part 5: Determination of grain size distribution ( sieve analysis ) 耐火泥浆 第5部分：粒度分布（筛分析）试验方法 |
China National Standards —Part |
English PDF |
| GB/T 22459.4-2022 |
Refractory mortars—Part 4: Determination of flexural bonding strength 耐火泥浆 第4部分：常温抗折粘接强度试验方法 |
China National Standards —Part |
English PDF |
| GB/T 22459.2-2022 |
Refractory mortars—Part 2：Determination of consistency using the reciprocating flow table method 耐火泥浆 第2部分：稠度试验方法（跳桌法） |
China National Standards —Part |
English PDF |
| GB/T 22459.1-2022 |
Refractory mortars—Part 1：Determination of consistency using the penetrating cone method 耐火泥浆 第1部分：稠度试验方法（锥入度法） |
China National Standards —Part |
English PDF |
| GB/T 19749.3-2022 |
Coupling capacitors and capacitor dividers—Part 3: AC or DC coupling capacitor for harmonic-filters applications 耦合电容器及电容分压器 第3部分：用于谐波滤波器的交流或直流耦合电容器 |
China National Standards —Part |
English PDF |
| GB/T 19749.2-2022 |
Coupling capacitors and capacitor dividers—Part 2: DC or AC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application 耦合电容器及电容分压器 第2部分：接于线与地之间用于电力线路载波（PLC）的直流或交流单相耦合电容器 |
China National Standards —Part |
English PDF |
| GB/T 20042.3-2022 |
Proton exchange membrane fuel cell—Part 3: Test method for proton exchange membrane 质子交换膜燃料电池 第3部分：质子交换膜测试方法 |
China National Standards —Part |
English PDF |
| GB/T 38002.2-2022 |
Automation system and integration—Serial real time communication system for manufacturing integration—Part 2: Input and output device profile 自动化系统与集成 制造业串行实时通信系统集成 第2部分：输入输出设备行业专规 |
China National Standards —Part |
English PDF |
| GB/T 18449.4-2022 |
Metallic materials—Knoop hardness test—Part 4: Tables of hardness values 金属材料 努氏硬度试验 第4部分: 硬度值表 |
China National Standards —Part |
English PDF |
| GB/T 4340.4-2022 |
Metallic materials—Vickers hardness test—Part 4：Tables of hardness values 金属材料 维氏硬度试验 第4部分: 硬度值表 |
China National Standards —Part |
English PDF |
| GB/T 3222.2-2022 |
Acoustics—Description, measurement and assessment of environmental noise—Part 2: Determination of sound pressure levels 声学 环境噪声的描述、测量与评价 第2部分：声压级测定 |
China National Standards —Part |
English PDF |
| GB/T 4854.3-2022 |
Acoustics—Reference zero for the calibration of audiometric equipment—Part 3：Reference equivalent threshold vibratory force levels for pure tones and bone vibrators 声学 校准测听设备的基准零级 第3部分: 骨振器纯音基准等效阈振动力级 |
China National Standards —Part |
English PDF |
| GB/T 17473.7-2022 |
Test methods of precious metals pastes used for microelectronics—Part 7: Determination of solderability and solder leaching resistance 微电子技术用贵金属浆料测试方法 第7部分：可焊性、耐焊性测定 |
China National Standards —Part |
English PDF |
| GB/T 3222.1-2022 |
Acoustics—Description, measurement and assessment of environmental noise—Part 1: Basic quantities and assessment procedures 声学 环境噪声的描述、测量与评价 第1部分：基本参量与评价方法 |
China National Standards —Part |
English PDF |
| GB/T 39078.2-2022 |
Safety requirements for escalators and moving walks—Part 2: Safety parameters meeting essential safety requirements 自动扶梯和自动人行道安全要求 第2部分：满足基本安全要求的安全参数 |
China National Standards —Part |
English PDF |
| GB/T 12967.6-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第6部分：色差和外观质量 |
China National Standards —Part |
English PDF |
| GB/T 12967.5-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第5部分：抗破裂性的测定 |
China National Standards —Part |
English PDF |
| GB/T 12967.4-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第4部分：耐光热性能的测定 |
China National Standards —Part |
English PDF |
| GB/T 12967.3-2022 |
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 3 : Salt spray test 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第3部分：盐雾试验 |
China National Standards —Part |
English PDF |
| GB/T 6609.30-2022 |
Chemical analysis methods and determination of physical performance of alumina—Part 30: Determination of trace elements—Wavelength dispersive X-ray fluorescence spectrometric method 氧化铝化学分析方法和物理性能测定方法 第30部分：微量元素含量的测定 波长色散X射线荧光光谱法 |
China National Standards —Part |
English PDF |
| GB/T 19889.2-2022 |
Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2 : Determination and application of measurement uncertainties 声学 建筑和建筑构件隔声测量 第2部分：测量不确定度评定和应用 |
China National Standards —Part |
English PDF |
| GB/T 17001.6-2022 |
Anti-counterfeiting printing ink—Part 6：Infrared excitation fluorescence anti-counterfeiting printing ink 防伪油墨 第6部分：红外激发荧光防伪油墨 |
China National Standards —Part |
English PDF |
| GB/T 20720.3-2022 |
Enterprise-control system integration—Part 3: Activity models of manufacturing operations management 企业控制系统集成 第3部分：制造运行管理的活动模型 |
China National Standards —Part |
English PDF |
| GB/T 1819.1-2022 |
Methods for chemical analysis of tin concentrates—Part 1：Determination of moisture content—Heat drying method 锡精矿化学分析方法 第1部分：水分含量的测定 热干燥法 |
China National Standards —Part |
English PDF |
| GB/T 41157.5-2022 |
Fasteners for nuclear power plants—Part 5：Acceptance inspection 核电厂用紧固件 第5部分：验收检查 |
China National Standards —Part |
English PDF |
| GB/T 41157.1-2022 |
Fasteners for nuclear power plants—Part 1：Bolts, screws and studs made of alloy steel 核电厂用紧固件 第1部分：合金钢螺栓、螺钉和螺柱 |
China National Standards —Part |
English PDF |
| GB/T 41157.2-2022 |
Fasteners for nuclear power plants—Part 2：Nuts made of carbon steel and alloy steel 核电厂用紧固件 第2部分：碳钢和合金钢螺母 |
China National Standards —Part |
English PDF |
| GB/T 41157.3-2022 |
Fasteners for nuclear power plants—Part 3：Bolts, screws and studs made of corrosion-resistant stainless steel 核电厂用紧固件 第3部分：不锈钢螺栓、螺钉和螺柱 |
China National Standards —Part |
English PDF |
| GB/T 41157.4-2022 |
Fasteners for nuclear power plants—Part 4：Nuts made of corrosion-resistant stainless steel 核电厂用紧固件 第4部分：不锈钢螺母 |
China National Standards —Part |
English PDF |
| GB/T 18380.36-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 36：Test for vertical flame spread of vertically-mounted bunched wires or cables—Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 |
China National Standards —Part |
English PDF |
| GB/T 18380.31-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards —Part |
English PDF |
| GB/T 18380.13-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 13:Test for vertical flame propagation for a single insulated wire or cable—Procedure for determination of flaming droplets/particles 电缆和光缆在火焰条件下的燃烧试验 第13部分：单根绝缘电线电缆火焰垂直蔓延试验 测定燃烧的滴落（物）/微粒的试验方法 |
China National Standards —Part |
English PDF |
| GB/T 18380.12-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 12:Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 kW pre-mixed flame 电缆和光缆在火焰条件下的燃烧试验 第12部分：单根绝缘电线电缆火焰垂直蔓延试验 1 kW 预混合型火焰试验方法 |
China National Standards —Part |
English PDF |
| GB/T 18380.11-2022 |
Tests on electric and optical fibre cables under fire conditions—Part 11:Test for vertical flame propagation for a single insulated wire or cable—Apparatus 电缆和光缆在火焰条件下的燃烧试验 第11部分：单根绝缘电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards —Part |
English PDF |
| GB/T 18944.2-2022 |
Flexible cellular polymeric materials—Sponge and expanded cellular rubber products—Specification—Part 2：Mouldings and extrusions 柔性多孔聚合物材料 海绵和发泡橡胶制品 规范 第2部分：模制品与挤出制品 |
China National Standards —Part |
English PDF |
| GB/T 24141.2-2022 |
Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards —Part |
English PDF |
| GB/T 3286.11-2022 |
Methods for chemical analysis of limestone and dolomite—Part 11: Determination of calcium oxide, magnesium oxide, silicon dioxide, aluminium oxide and iron oxide content—Wavelength dispersive X-ray fluorescence spectrometry (Fused cast bead method) 石灰石及白云石化学分析方法 第11部分：氧化钙、氧化镁、二氧化硅、氧化铝及氧化铁含量的测定 波长色散X射线荧光光谱法(熔铸玻璃片法) |
China National Standards —Part |
English PDF |
| GB/T 27748.2-2022 |
Stationary fuel cell power system—Part 2: Performance test methods 固定式燃料电池发电系统 第2部分：性能试验方法 |
China National Standards —Part |
English PDF |
| GB/T 3871.18-2022 |
Agricultural tractors—Test procedures—Part 18: Hydraulic power at tractor/implement interface 农业拖拉机 试验规程 第18部分：拖拉机与机具接口处液压功率 |
China National Standards —Part |
English PDF |
| GB/T 3871.5-2022 |
Agricultural tractors—Test procedures—Part 5: Turning and clearance diameters 农业拖拉机 试验规程 第5部分：转向圆和通过圆直径 |
China National Standards —Part |
English PDF |
| GB/T 21944.1-2022 |
Special products of silicon carbide—Kiln furniture of reaction bonded silicon carbide—Part 1：Beams 碳化硅特种制品 反应烧结碳化硅窑具 第1部分：方梁 |
China National Standards —Part |
English PDF |
| GB/T 8446.3-2022 |
Heat sinks for power semiconductor devices—Part 3: Insulators and fasteners 电力半导体器件用散热器 第3部分：绝缘件和紧固件 |
China National Standards —Part |
English PDF |
| GB/T 8446.2-2022 |
Heat sinks for power semiconductor devices—Part 2: Measurement methods of thermal resistance and inlet-outlet fluid pressure drop 电力半导体器件用散热器 第2部分：热阻和流阻测量方法 |
China National Standards —Part |
English PDF |
| GB/T 8446.1-2022 |
Heat sinks for power semiconductor devices—Part 1: Radiators 电力半导体器件用散热器 第1部分：散热体 |
China National Standards —Part |
English PDF |
| GB/T 16507.6-2022 |
Water-tube boilers—Part 6: Inspection, testing and acceptance 水管锅炉 第6部分：检验、试验和验收 |
China National Standards —Part |
English PDF |
| GB/T 16507.4-2022 |
Water-tube boilers—Part 4: Strength calculation of pressure parts 水管锅炉 第4部分：受压元件强度计算 |
China National Standards —Part |
English PDF |
| GB/T 16507.3-2022 |
Water-tube boilers—Part 3: Structure design 水管锅炉 第3部分：结构设计 |
China National Standards —Part |
English PDF |
| GB/T 16507.2-2022 |
Water-tube boilers—Part 2: Materials 水管锅炉 第2部分：材料 |
China National Standards —Part |
English PDF |
| GB/T 16507.1-2022 |
Water-tube boilers—Part 1: General requirements 水管锅炉 第1部分：总则 |
China National Standards —Part |
English PDF |
| GB/T 41158.7-2022 |
Three-dimensional process planning for mechanical products—Part 7： Distribution requirements 机械产品三维工艺设计 第7部分：发放要求 |
China National Standards —Part |
English PDF |
| GB/T 41158.3-2022 |
Three-dimensional process planning for mechanical products—Part 3: Model building 机械产品三维工艺设计 第3部分：模型构建 |
China National Standards —Part |
English PDF |
| GB/T 41158.4-2022 |
Three-dimensional process planning for mechanical products—Part 4：Process symbol and annotation 机械产品三维工艺设计 第4部分：工艺符号与标注 |
China National Standards —Part |
English PDF |
| GB/T 41158.6-2022 |
Three-dimensional process planning for mechanical products—Part 6：Data requirements 机械产品三维工艺设计 第6部分：数据要求 |
China National Standards —Part |
English PDF |
| GB/T 41158.5-2022 |
Three-dimensional process planning for mechanical products—Part 5：Detailed design 机械产品三维工艺设计 第5部分：详细设计 |
China National Standards —Part |
English PDF |
| GB/T 41158.1-2022 |
Three-dimensional process planning for mechanical products—Part 1：Terms and definitions 机械产品三维工艺设计 第1部分：术语和定义 |
China National Standards —Part |
English PDF |
| GB/T 41158.2-2022 |
Three-dimensional process planning for mechanical products—Part 2：General requirements 机械产品三维工艺设计 第2部分：通用要求 |
China National Standards —Part |
English PDF |
| GB/T 17737.8-2022 |
Coaxial communication cables—Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric 同轴通信电缆 第8部分：聚四氟乙烯绝缘半柔电缆分规范 |
China National Standards —Part |
English PDF |
| GB/T 17737.801-2022 |
Coaxial communication cables—Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric 同轴通信电缆 第8-1部分：聚四氟乙烯绝缘半柔电缆空白详细规范 |
China National Standards —Part |
English PDF |
| GB/T 41270.9-2022 |
Avionics process management—Effects of atmospheric radiation—Part 9: Procedures and methods for calculating single event effect failure rates for avionics {译} 航空电子过程管理 大气辐射影响 第9部分：航空电子设备单粒子效应故障率计算程序与方法 |
China National Standards —Part |
English PDF |
| GB/T 18494.2-2022 |
Convertor transformers—Part 2: Transformers for HVDC applications 变流变压器 第2部分：高压直流输电用换流变压器 |
China National Standards —Part |
English PDF |
| GB/T 1094.14-2022 |
Power transformers—Part 14: Liquid-immersed power transformer using high-temperature insulation materials 电力变压器 第14部分：采用高温绝缘材料的液浸式电力变压器 |
China National Standards —Part |
English PDF |
| GB/T 1094.11-2022 |
Power transformers—Part 11: Dry-type transformers 电力变压器 第11部分：干式变压器 |
China National Standards —Part |
English PDF |
| GB/T 17989.9-2022 |
Statistical method of quality control in production process—Control charts—Part 9: Control charts for stationary processes 生产过程质量控制统计方法 控制图 第9部分：平稳过程控制图 |
China National Standards —Part |
English PDF |
| GB/T 17989.8-2022 |
Statistical method of quality control in production process—Control charts—Part 8：Charting techniques for short runs and small mixed batches 生产过程质量控制统计方法 控制图 第8部分：短周期小批量的控制方法 |
China National Standards —Part |
English PDF |
| GB/T 17989.7-2022 |
Statistical method of quality control in production process—Control charts—Part 7: Multivariate control charts 生产过程质量控制统计方法 控制图 第7部分：多元控制图 |
China National Standards —Part |
English PDF |
| GB/T 17989.6-2022 |
Statistical method of quality control in production process—Control charts—Part 6: EWMA control charts 生产过程质量控制统计方法 控制图 第6部分：指数加权移动平均控制图 |
China National Standards —Part |
English PDF |
| GB/T 17989.5-2022 |
Statistical method of quality control in production process—Control charts—Part 5：Specialized control charts 生产过程质量控制统计方法 控制图 第5部分：特殊控制图 |
China National Standards —Part |
English PDF |
| GB/T 5796.4-2022 |
Trapezoidal screw threads—Part 4: Tolerances 梯形螺纹 第4部分：公差 |
China National Standards —Part |
English PDF |
| GB/T 5796.3-2022 |
Trapezoidal screw threads—Part 3: Basic dimensions 梯形螺纹 第3部分：基本尺寸 |
China National Standards —Part |
English PDF |
| GB/T 5796.2-2022 |
Trapezoidal screw threads—Part 2: General plan 梯形螺纹 第2部分：直径与螺距系列 |
China National Standards —Part |
English PDF |
| GB/T 5796.1-2022 |
Trapezoidal screw threads—Part 1: Profiles 梯形螺纹 第1部分：牙型 |
China National Standards —Part |
English PDF |
| GB/T 6609.2-2022 |
Chemical analysis methods and determination of physical performance of alumina—Part 2: Determination of loss of mass at 300 ℃ and 1000 ℃ 氧化铝化学分析方法和物理性能测定方法 第2部分：300 ℃和1000 ℃质量损失的测定 |
China National Standards —Part |
English PDF |
| GB 5768.2-2022 |
Road traffic signs and markings—Part 2: Road traffic signs 道路交通标志和标线 第2部分：道路交通标志 |
China National Standards —Part |
English PDF |
| GB/T 42168.1-2022 |
Condoms—Guidelines for clinical research—Part 1: Self-reported clinical functional studies of male condoms {译} 避孕套 临床研究指南 第1部分：男用避孕套基于自我报告的临床功能研究 |
China National Standards —Part |
English PDF |
| GB/T 12690.1-2022 |
Chemical analysis methods for non-rare earth impurities in rare earth metals and their oxides—Part 1: Determination of carbon and sulfur content—High frequency-infrared absorption method {译} 稀土金属及其氧化物中非稀土杂质化学分析方法 第1部分：碳、硫量的测定 高频-红外吸收法 |
China National Standards —Part |
English PDF |
| GB/T 42076.1-2022 |
Biotechnology—Cell counting—Part 1: General rules for cell counting methods {译} 生物技术 细胞计数 第1部分：细胞计数方法通则 |
China National Standards —Part |
English PDF |
| GB/T 12085.17-2022 |
Optics and photonics—Environmental test methods—Part 17: Comprehensive test for pollution and solar radiation {译} 光学和光子学 环境试验方法 第17部分：污染、太阳辐射综合试验 |
China National Standards —Part |
English PDF |
| GB/T 41815.1-2022 |
Information technology—Biometrics presents attack detection—Part 1: Framework {译} 信息技术 生物特征识别呈现攻击检测 第1部分：框架 |
China National Standards —Part |
English PDF |
| GB/T 41813.2-2022 |
Information technology—Test methods for intelligent voice interaction—Part 2: Semantic understanding {译} 信息技术 智能语音交互测试方法 第2部分：语义理解 |
China National Standards —Part |
English PDF |
| GB/T 41813.1-2022 |
Information technology—Test methods for intelligent voice interaction—Part 1: Speech recognition {译} 信息技术 智能语音交互测试方法 第1部分：语音识别 |
China National Standards —Part |
English PDF |
| GB/T 41866.4-2022 |
Systems and software engineering—Information technology project performance benchmarking measurement framework—Part 4: Data collection and maintenance {译} 系统与软件工程 信息技术项目绩效基准度量框架 第4部分：数据收集和维护 |
China National Standards —Part |
English PDF |
| GB/T 41866.2-2022 |
Systems and software engineering—Information technology project performance benchmarking framework—Part 2: Benchmarking requirements {译} 系统与软件工程 信息技术项目绩效基准度量框架 第2部分：基准度量要求 |
China National Standards —Part |
English PDF |
| GB/T 19668.7-2022 |
Information technology services—Supervision—Part 7: Requirements for the measurement of supervision workload {译} 信息技术服务 监理 第7部分：监理工作量度量要求 |
China National Standards —Part |
English PDF |
| GB/T 40778.3-2022 |
Internet of things—System implementation for Web open services—Part 3: Object discovery methods {译} 物联网 面向Web开放服务的系统实现 第3部分：物体发现方法 |
China National Standards —Part |
English PDF |
| GB/T 41890.1-2022 |
Ships and marine technology—Model test methods for propeller cavitation noise during ship design—Part 1: Sound source level assessment {译} 船舶与海上技术 船舶设计过程中螺旋桨空化噪声模型试验方法 第1部分：声源级评估 |
China National Standards —Part |
English PDF |
| GB/T 40987.1-2021 |
Public library professional work specifications—Part 1： Provincial public library 公共图书馆业务规范 第1部分：省级公共图书馆 |
China National Standards —Part |
English PDF |
| GB/T 40987.2-2021 |
Public library professional work specifications—Part 2： Municipal public library 公共图书馆业务规范 第2部分：市级公共图书馆 |
China National Standards —Part |
English PDF |
| GB/T 40987.3-2021 |
Public library professional work specifications—Part 3：County public library 公共图书馆业务规范 第3部分：县级公共图书馆 |
China National Standards —Part |
English PDF |
| GB/T 38775.5-2021 |
Electric vehicle wireless power transfer—Part 5: Electromagnetic compatibility requirements and test methods 电动汽车无线充电系统 第5部分：电磁兼容性要求和试验方法 |
China National Standards —Part |
English PDF |
| GB/T 38775.6-2021 |
Electric vehicle wireless power transfer—Part 6：Interoperability requirements and testing—Gground side 电动汽车无线充电系统 第6部分：互操作性要求及测试 地面端 |
China National Standards —Part |
English PDF |
| GB/T 38775.7-2021 |
Electric vehicle wireless power transfer—Part 7:Interoperability requirements and testing—Vehicle side 电动汽车无线充电系统 第7部分：互操作性要求及测试 车辆端 |
China National Standards —Part |
English PDF |
| GB 9706.216-2021 |
Medical electrical equipment—Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment 医用电气设备 第2-16部分：血液透析、血液透析滤过和血液滤过设备的基本安全和基本性能专用要求 |
China National Standards —Part |
English PDF |
| GB 9706.229-2021 |
Medical electrical equipment—Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators 医用电气设备 第2-29部分：放射治疗模拟机的基本安全和基本性能专用要求 |
China National Standards —Part |
English PDF |
| GB 9706.239-2021 |
Medical electrical equipment—Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment 医用电气设备 第2-39部分：腹膜透析设备的基本安全和基本性能专用要求 |
China National Standards —Part |
English PDF |
| GB 40554.1-2021 |
Code of safety practice for offshore oil & gas exploration and production—Part 1: General 海洋石油天然气开采安全规程 第1部分：总则 |
China National Standards —Part |
English PDF |
| GB/T 28004.1-2021 |
Disposable diapers—Part 1:Disposable diapers for baby 纸尿裤 第1部分：婴儿纸尿裤 |
China National Standards —Part |
English PDF |
| GB 9706.265-2021 |
Medical electrical equipment—Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment 医用电气设备 第2-65部分：口内成像牙科X射线机的基本安全和基本性能专用要求 |
China National Standards —Part |
English PDF |
| GB 9706.243-2021 |
Medical electrical equipment—Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures 医用电气设备 第2-43部分：介入操作X射线设备的基本安全和基本性能专用要求 |
China National Standards —Part |
English PDF |
| GB/T 40535.1-2021 |
Test methods of continuous nitride ceramic fibers—Part 1：Nitrogen content 连续氮化物陶瓷纤维测试方法 第1部分：氮含量 |
China National Standards —Part |
English PDF |
| GB/T 40523.1-2021 |
Ships and marine technology—Measurement of changes in hull and propeller performance—Part 1: General principles 船舶与海上技术 船体和螺旋桨性能变化测量 第1部分：总则 |
China National Standards —Part |
English PDF |
| GB/T 40521.2-2021 |
Passenger cars test track for a severe lane-change manoeuvre—Part 2: Obstacle avoidance 乘用车紧急变线试验车道 第2部分：避障 |
China National Standards —Part |
English PDF |
| GB/T 40521.1-2021 |
Passenger cars test track for a severe lane-change manoeuvre—Part 1: Double lane-change 乘用车紧急变线试验车道 第1部分：双移线 |
China National Standards —Part |
English PDF |
| GB/T 40531.1-2021 |
Ships and marine technology—Specifications for gas detectors intended for use on board ships—Part 1:Portable gas detectors for atmosphere testing of enclosed spaces 船舶与海上技术 船用气体探测器规范 第1部分：围蔽处所的便携式气体探测器 |
China National Standards —Part |
English PDF |
| GB/T 40528.1-2021 |
Requirements for structural dimensions of multi-hull yacht—Part 1:Composite material 多体游艇结构尺寸规定 第1部分：复合材料 |
China National Standards —Part |
English PDF |
| GB/T 40523.3-2021 |
Ships and marine technology—Measurement of changes in hull and propeller performance—Part 3: Alternative methods 船舶与海上技术 船体和螺旋桨性能变化测量 第3部分：替代方法 |
China National Standards —Part |
English PDF |
| GB/T 40523.2-2021 |
Ships and marine technology—Measurement of changes in hull and propeller performance—Part 2: Default method 船舶与海上技术 船体和螺旋桨性能变化测量 第2部分：默认方法 |
China National Standards —Part |
English PDF |
| GB/T 40380.2-2021 |
Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第2部分：高温时流速的测定 |
China National Standards —Part |
English PDF |
| GB/T 40426.3-2021 |
Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material 塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材 |
China National Standards —Part |
English PDF |
| GB/T 40426.2-2021 |
Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material 塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材 |
China National Standards —Part |
English PDF |
| GB/T 40426.1-2021 |
Plastics—Decorative solid surfacing materials—Part 1: Classification and specifications 塑料制品 装饰性实体面材 第1部分：分类和规范 |
China National Standards —Part |
English PDF |
| GB/T 40425.1-2021 |
Electric vehicle top contact charging system—Part 1: General requirements 电动客车顶部接触式充电系统 第1部分：通用要求 |
China National Standards —Part |
English PDF |
| GB/T 40398.2-2021 |
Test method for C-C composites—Part 2: Flexural properties 炭-炭复合炭素材料试验方法 第2部分：弯曲性能试验 |
China National Standards —Part |
English PDF |
| GB/T 40398.1-2021 |
Test method for C-C composites—Part 1: Friction and wear property 炭-炭复合炭素材料试验方法 第1部分：摩擦磨损性能试验 |
China National Standards —Part |
English PDF |
| GB/T 40352.1-2021 |
Collection and processing of human tissue biomaterial—Part 1:Surgical removal tissue biomaterial 人类组织样本采集与处理 第1部分：手术切除组织 |
China National Standards —Part |
English PDF |
| GB/T 40344.1-2021 |
Vacuum technology—Standard methods for measuring vacuum-pump performance—Part 1：General description 真空技术 真空泵性能测量标准方法 第1部分：总体要求 |
China National Standards —Part |
English PDF |
| GB/T 40283.3-2021 |
Automation systems and integration—Interoperability of capability units for manufacturing application solutions—Part 3:Verification and validation of interoperability among capability units 自动化系统与集成 制造应用解决方案的能力单元互操作 第3部分：能力单元互操作性的验证和确认 |
China National Standards —Part |
English PDF |
| GB/T 39715.4-2021 |
Plastics—Biobased content—Part 4: Determination of biobased mass content 塑料 生物基含量 第4部分：生物基物质含量的测定 |
China National Standards —Part |
English PDF |
| GB/T 39715.3-2021 |
Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content 塑料 生物基含量 第3部分：生物基合成聚合物含量的测定 |
China National Standards —Part |
English PDF |
| GB/T 39715.2-2021 |
Plastics—Biobased content—Part 2: Determination of biobased carbon content 塑料 生物基含量 第2部分：生物基碳含量的测定 |
China National Standards —Part |
English PDF |
| GB/T 39715.1-2021 |
Plastics—Biobased content—Part 1: General principles 塑料 生物基含量 第1部分：通用原则 |
China National Standards —Part |
English PDF |
| GB/T 39380.1-2021 |
Chlorinated poly (vinyl chloride) (PVC-C) piping system for fire sprinkler installations—Part 1：Pipes 喷水灭火用氯化聚氯乙烯（PVC-C）管道系统 第1部分：管材 |
China National Standards —Part |
English PDF |
| GB/T 38206.5-2021 |
Methods to assess the reliability of pneumatic components—Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves 气动元件可靠性评估方法 第5部分：止回阀、梭阀、双压阀（与阀）、单向节流阀及快排阀 |
China National Standards —Part |
English PDF |
| GB/T 38206.4-2021 |
Methods to assess the reliability of pneumatic components—Part 4: Pressure regulators 气动元件可靠性评估方法 第 4 部分：调压阀 |
China National Standards —Part |
English PDF |
| GB/T 38146.3-2021 |
China automotive test cycle—Part 3: Engine 中国汽车行驶工况 第3部分：发动机 |
China National Standards —Part |
English PDF |
| GB/T 38048.2-2021 |
Surface cleaning appliances—Part 2: Dry vacuum cleaners for household or similar use一Methods for measuring the performance 表面清洁器具 第2部分：家用和类似用途干式真空吸尘器 性能测试方法 |
China National Standards —Part |
English PDF |
| GB/T 37199.1-2021 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 1：Designation system and basis for specifications 塑料 聚丁烯（PB）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards —Part |
English PDF |
| GB/T 36271.2-2021 |
Power installations exceeding 1 kV a.c. and 1.5 kV d.c.—Part 2: d.c. 交流1kV及直流1.5kV以上电力设施 第2部分：直流 |
China National Standards —Part |
English PDF |
| GB/T 34830.2-2021 |
Collection specifications for credit information—Part 2: Contents 信用信息征集规范 第2部分：内容 |
China National Standards —Part |
English PDF |
| GB/T 34520.8-2021 |
Test methods of continuous silicon carbide fibers—Part 8：Oxygen content 连续碳化硅纤维测试方法 第8部分：氧含量 |
China National Standards —Part |
English PDF |
| GB/T 34015.4-2021 |
Recovery of traction battery used in electric vehicle—Echelon use—Part 4: Labels for echelon used battery products 车用动力电池回收利用 梯次利用 第4部分：梯次利用产品标识 |
China National Standards —Part |
English PDF |
| GB/T 34015.3-2021 |
Recovery of traction battery used in electric vehicle—Echelon use—Part 3：Echelon using requirement 车用动力电池回收利用 梯次利用 第3部分：梯次利用要求 |
China National Standards —Part |
English PDF |
| GB/T 33863.9-2021 |
OPC unified architecture—Part 9: Alarms and conditions OPC统一架构 第9部分：报警和条件 |
China National Standards —Part |
English PDF |
| GB/T 33863.13-2021 |
OPC unified architecture—Part 13: Aggregates OPC统一架构 第13部分：聚合 |
China National Standards —Part |
English PDF |
| GB/T 33863.11-2021 |
OPC unified architecture—Part 11: Historical access OPC统一架构 第11部分：历史访问 |
China National Standards —Part |
English PDF |
| GB/T 33863.10-2021 |
OPC unified architecture—Part 10: Programs OPC统一架构 第10部分：程序 |
China National Standards —Part |
English PDF |
| GB/T 33521.32-2021 |
Mechanical vibration—Ground-borne noise and vibration arising from rail systems—Part 32: Measurement of dynamic properties of the ground 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第32部分：大地的动态性能测量 |
China National Standards —Part |
English PDF |
| GB/T 33047.3-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 |
China National Standards —Part |
English PDF |
| GB/T 33047.2-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy 塑料 聚合物热重法（TG） 第2部分：活化能的测定 |
China National Standards —Part |
English PDF |
| GB/T 31214.2-2021 |
Springs—Shot peening—Part 2：Cut wire shot technical specification and testing 弹簧 喷丸 第2部分：钢丝切丸技术要求与检测 |
China National Standards —Part |
English PDF |
| GB/T 29168.1-2021 |
Petroleum and natural gas industries—Induction bends, fittings and flanges for pipeline transportation systems—Part 1: Induction bends 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第1部分：感应加热弯管 |
China National Standards —Part |
English PDF |
| GB/T 26519.3-2021 |
Persulfate for industrial use—Part 3:Ammonium persulfate for industrial use 工业过硫酸盐 第3部分：工业过硫酸铵 |
China National Standards —Part |
English PDF |
| GB/T 26519.1-2021 |
Persulfate for industrial use—Part 1:Sodium persulfate for industrial use 工业过硫酸盐 第1部分：工业过硫酸钠 |
China National Standards —Part |
English PDF |
| GB/T 25915.8-2021 |
Cleanrooms and associated controlled environments—Part 8: Classification of air cleanliness by chemical concentration (ACC) 洁净室及相关受控环境 第8部分：按化学物浓度划分空气洁净度(ACC)等级 |
China National Standards —Part |
English PDF |
| GB/T 25915.2-2021 |
Cleanrooms and associated controlled environments—Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration 洁净室及相关受控环境 第2部分：洁净室空气粒子浓度的监测 |
China National Standards —Part |
English PDF |
| GB/T 25915.1-2021 |
Cleanrooms and associated controlled environments—Part 1: Classification of air cleanliness by particle concentration 洁净室及相关受控环境 第1部分：按粒子浓度划分空气洁净度等级 |
China National Standards —Part |
English PDF |
| GB/T 25915.10-2021 |
Cleanrooms and associated controlled environments—Part 10: Classification of surface cleanliness by chemical concentration 洁净室及相关受控环境 第10部分：按化学物浓度划分表面洁净度等级 |
China National Standards —Part |
English PDF |
| GB/T 20899.6-2021 |
Methods for chemical analysis of gold ores—Part 6: Determination of zinc content 金矿石化学分析方法 第6部分：锌量的测定 |
China National Standards —Part |
English PDF |
| GB/T 20899.5-2021 |
Methods for chemical analysis of gold ores—Part 5: Determination of lead content 金矿石化学分析方法 第5部分：铅量的测定 |
China National Standards —Part |
English PDF |
| GB/T 20899.4-2021 |
Methods for chemical analysis of gold ores—Part 4: Determination of copper content 金矿石化学分析方法 第4部分：铜量的测定 |
China National Standards —Part |
English PDF |
| GB/T 20485.43-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准 |
China National Standards —Part |
English PDF |
| GB/T 20485.32-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第32部分：谐振测试 用冲击激励测试加速度计的频率和相位响应 |
China National Standards —Part |
English PDF |
| GB/T 17850.9-2021 |
Preparation of steel substrates before application of paints and related products—Specifications for non-metallic blast-cleaning abrasives—Part 9: Staurolite 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分：十字石 |
China National Standards —Part |
English PDF |
| GB/T 17564.6-2021 |
Standard data element types with associated classification scheme for electric components—Part 6: IEC Common Data Dictionary (IEC CDD) quanlity guidelines 电气元器件的标准数据元素类型和相关分类模式 第6部分：IEC公共数据字典（IEC CDD）质量指南 |
China National Standards —Part |
English PDF |
| GB/T 15972.31-2021 |
Specifications for optical fibre test methods—Part 31: Measurement methods and test procedures for mechanical characteristics—Tensile strength 光纤试验方法规范 第31部分：机械性能的测量方法和试验程序 抗张强度 |
China National Standards —Part |
English PDF |
| GB/T 15970.10-2021 |
Corrosion of metals and alloys—Stress corrosion testing—Part l0: Reverse U-bend method 金属和合金的腐蚀 应力腐蚀试验 第10部分：反向U型弯曲试验方法 |
China National Standards —Part |
English PDF |
| GB/T 15969.9-2021 |
Programmable controllers—Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) 可编程序控制器 第9部分：用于小型传感器和执行器的单点数字通信接口(SDCI) |
China National Standards —Part |
English PDF |
| GB/T 15224.2-2021 |
Classification for quality of coal—Part 2: Sulfur content 煤炭质量分级 第2部分：硫分 |
China National Standards —Part |
English PDF |
| GB/T 10781.9-2021 |
Quality requirements for baijiu—Part 9:Zhimaxiangxing baijiu 白酒质量要求 第9部分：芝麻香型白酒 |
China National Standards —Part |
English PDF |
| GB/T 10054.1-2021 |
Builders' hoists for goods—Part 1: Hoists with accessible platforms 货用施工升降机 第1部分：运载装置可进人的升降机 |
China National Standards —Part |
English PDF |
| GB/T 9239.12-2021 |
Mechanical vibration—Rotor balancing—Part 12: Procedures and tolerances for rotors with flexible behaviour 机械振动 转子平衡 第12部分：具有挠性特性的转子的平衡方法与允差 |
China National Standards —Part |
English PDF |
| GB/T 8013.5-2021 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 5: Function coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第5部分：功能膜 |
China National Standards —Part |
English PDF |
| GB/T 8013.4-2021 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 4: Texture coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第4部分：纹理膜 |
China National Standards —Part |
English PDF |
| GB/T 7739.6-2021 |
Methods for chemical analysis of gold concentrates—Part 6: Determination of zinc content 金精矿化学分析方法 第6部分：锌量的测定 |
China National Standards —Part |
English PDF |
| GB/T 7739.5-2021 |
Methods for chemical analysis of gold concentrates—Part 5: Determination of lead content 金精矿化学分析方法 第5部分：铅量的测定 |
China National Standards —Part |
English PDF |
| GB/T 7187.1-2021 |
Fuel oil consumption for transportation ships—Part 1: Calculation method for marine ships 运输船舶燃油消耗量 第1部分：海洋船舶计算方法 |
China National Standards —Part |
English PDF |
| GB/T 6324.11-2021 |
Test method of organic chemical products—Part 11：Determination of trace arsenic in liquid products—Atomic fluorescence spectrometric method 有机化工产品试验方法 第11部分：液体化工产品中微量砷的测定 原子荧光法 |
China National Standards —Part |
English PDF |
| GB/T 5211.14-2021 |
General methods of test for pigments and extenders—Part 14: Determination of residue on sieve—Mechanical flushing procedure 颜料和体质颜料通用试验方法 第14部分：筛余物的测定 机械冲洗法 |
China National Standards —Part |
English PDF |
| GB/T 4706.110-2021 |
Safety of household and similar electrical appliances—Part 2：Particular requirements for robotic battery powered electrical lawnmowers 家用和类似用途电器的安全 第2部分：由电池供电的智能草坪割草机的专用要求 |
China National Standards —Part |
English PDF |
| GB/T 4678.15-2021 |
Die casting dies—Components—Part 15: Spacer blocks 压铸模 零件 第15部分：垫块 |
China National Standards —Part |
English PDF |
| GB/T 4214.15-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for electric thermal storage room heaters 家用和类似用途电器噪声测试方法 储热式室内加热器的特殊要求 |
China National Standards —Part |
English PDF |
| GB/T 4214.14-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for refrigerators, frozen-food storage cabinets and food freezers 家用和类似用途电器噪声测试方法 电冰箱、冷冻食品储藏箱和食品冷冻箱的特殊要求 |
China National Standards —Part |
English PDF |
| GB/T 4214.13-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for range hoods and other cooking fume extractors 家用和类似用途电器噪声测试方法 吸油烟机及其他烹饪烟气吸排装置的特殊要求 |
China National Standards —Part |
English PDF |
| GB/T 4214.12-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for fan heaters 家用和类似用途电器噪声测试方法 风扇式加热器的特殊要求 |
China National Standards —Part |
English PDF |
| GB/T 4214.11-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for electrically-operated food preparation appliances 家用和类似用途电器噪声测试方法 电动食品加工器具的特殊要求 |
China National Standards —Part |
English PDF |
| GB/T 1973.1-2021 |
Small cylindrical springs—Part 1：Technical specification 小型圆柱螺旋弹簧 第1部分：技术条件 |
China National Standards —Part |
English PDF |
| GB/T 1845.2-2021 |
Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards —Part |
English PDF |
| GB/T 40380.1-2021 |
Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures 金属粉末 高温时松装密度和流速的测定 第1部分：高温时松装密度的测定 |
China National Standards —Part |
English PDF |
| GB/T 20081.3-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分：测试减压阀流量特性的可选方法 |
China National Standards —Part |
English PDF |
| GB/T 20081.2-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 2: Test methods to determine the main characteristics to be included in literature from suppliers 气动 减压阀和过滤减压阀 第 2 部分：评定商务文件中应包含的主要特性的试验方法 |
China National Standards —Part |
English PDF |
| GB/T 20081.1-2021 |
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 1:Main characteristics to be included in literature from suppliers and product-marking requirements 气动 减压阀和过滤减压阀 第1部分：商务文件中应包含的主要特性和产品标识要求 |
China National Standards —Part |
English PDF |
| GB/T 19963.1-2021 |
Technical specification for connecting wind farm to power system—Part 1: On shore wind power 风电场接入电力系统技术规定 第1部分：陆上风电 |
China National Standards —Part |
English PDF |
| GB/T 18916.55-2021 |
Norm of water intake—Part 55：Leather 取水定额 第55部分：皮革 |
China National Standards —Part |
English PDF |
| GB/T 16840.8-2021 |
Technical determination methods for electrical fire evidence—Part 8: Method of thermal analysis 电气火灾痕迹物证技术鉴定方法 第8部分: 热分析法 |
China National Standards —Part |
English PDF |
| GB/T 16840.7-2021 |
Technical determination methods for electrical fire evidence—Part 7：Component analytic method of energy dispersive spectrometry 电气火灾痕迹物证技术鉴定方法 第7部分:EDS成分分析法 |
China National Standards —Part |
English PDF |
| GB/T 16840.4-2021 |
Technical determination methods for electrical fire evidence—Part 4: Metallographic analysis method 电气火灾痕迹物证技术鉴定方法 第4部分：金相分析法 |
China National Standards —Part |
English PDF |
| GB/T 16840.3-2021 |
Technical determination methods for electrical fire evidence—Part 3: Auger electron spectroscopy component analytic method 电气火灾痕迹物证技术鉴定方法 第3部分：俄歇分析法 |
China National Standards —Part |
English PDF |
| GB/T 16840.2-2021 |
Technical determination methods for electrical fire evidence—Part 2: Residual magnetism method 电气火灾痕迹物证技术鉴定方法 第2部分:剩磁检测法 |
China National Standards —Part |
English PDF |
| GB/T 26519.2-2021 |
Persulfate for industrial use—Part 2:Potassium persulfate for industrial use 工业过硫酸盐 第2部分：工业过硫酸钾 |
China National Standards —Part |
English PDF |
| GB 9706.239-2021 |
Medical electrical equipment—Part 2-39:Particular requirements for basic safety and essential performance of peritoneal dialysis equipment 医用电气设备 第2-39部分：腹膜透析设备的基本安全和基本性能专用要求 |
China National Standards —Part |
English PDF |
| GB 9706.229-2021 |
Medical electrical equipment—Part 2-29:Particular requirements for the basic safety and essential performance of radiotherapy simulators 医用电气设备 第2-29部分：放射治疗模拟机的基本安全和基本性能专用要求 |
China National Standards —Part |
English PDF |
| GB 9706.216-2021 |
Medical electrical equipment—Part 2-16: Particular requirements for the basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment 医用电气设备 第2-16部分：血液透析、血液透析滤过和血液滤过设备的基本安全和基本性能专用要求 |
China National Standards —Part |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
