Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 18222.2-2024 |
Small craft - Determination of maximum propulsion rating by maneuvering speed - Part 2: Craft with a hull length between 8m and 24m {译} 小艇-用操纵速度确定最大推进额定功率-第2部分：艇体长度在8m～24m之间的艇 |
China National Standards 24 |
 English PDF |
| GB/T 7000.224-2023 |
Luminaires Part 2-24: Special requirements Limited surface temperature luminaires {译} 灯具 第2-24部分：特殊要求 限制表面温度灯具 |
China National Standards 24 |
English PDF |
| GB/T 26949.24-2023 |
Industrial Vehicles Stability Verification Part 24: Off-Road Slewing Telescopic Forklift {译} 工业车辆 稳定性验证 第24部分：越野型回转伸缩臂式叉车 |
China National Standards 24 |
English PDF |
| GB/T 14034.1-2023 |
Hydraulic transmission connections Metal pipe couplings Part 1: 24° taper {译} 液压传动连接 金属管接头 第1部分：24°锥形 |
China National Standards 24 |
English PDF |
| GB/T 42691.4-2023 |
Road vehicles - Local area interconnect network (LIN) - Part 4: 12V/24V electrical physical layer specification {译} 道路车辆 局域互联网络（LIN） 第4部分：12V/24V电气物理层规范 |
China National Standards 24 |
English PDF |
| GB/T 24002.1-2023 |
Environmental management system - Application of GB/T 24001 Guidelines for managing environmental aspects and responding to environmental conditions for environmental subject areas - Part 1: General principles {译} 环境管理体系 针对环境主题领域应用 GB/T 24001管理环境因素和应对环境状况的指南 第1部分：通则 |
China National Standards 24 |
English PDF |
| GB/Z 41561-2022 |
Comparison of mechanical and physical properties of ISO 8124-1, EN 71-1 and ASTM F963 standards {译} ISO 8124-1、EN 71-1和ASTM F963标准机械物理性能差异比对 |
China National Standards 24 |
English PDF |
| GB/T 17215.324-2022 |
Electrical Measuring Equipment (AC) Particular Requirements Part 24: Static Fundamental Component Reactive Energy Meters (Class 0.5S, Class 1S, Class 1, Class 2 and Class 3) {译} 电测量设备（交流） 特殊要求 第24部分：静止式基波分量无功电能表（0.5S级、1S级、1级、2级和3级） |
China National Standards 24 |
English PDF |
| GB/T 14352.24-2022 |
Methods for chemical analysis of tungsten ore and molybdenum ore - Part 24: Determination of germanium content - Inductively coupled plasma mass spectrometry {译} 钨矿石、钼矿石化学分析方法 第24部分：锗含量的测定 电感耦合等离子体质谱法 |
China National Standards 24 |
English PDF |
| GB/T 40025-2021 |
RF technical requirements and test methods for 24GHz vehicle radio equipment 24GHz车辆无线电设备射频技术要求及测试方法 |
China National Standards 24 |
English PDF |
| GB/T 8151.24-2021 |
Methods for chemical analysis of zinc concentrates—Part 24:Determination of soluble zinc content—Flame atomic absorption spectrometry 锌精矿化学分析方法 第24部分:可溶性锌含量的测定 火焰原子吸收光谱法 |
China National Standards 24 |
English PDF |
| GB 9706.224-2021 |
Medical electrical equipment—Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers 医用电气设备 第2-24部分：输液泵和输液控制器的基本安全和基本性能专用要求 |
China National Standards 24 |
English PDF |
| GB/T 6346.24-2021 |
Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte 电子设备用固定电容器 第24部分：分规范 表面安装导电聚合物固体电解质钽固定电容器 |
China National Standards 24 |
English PDF |
| GB/T 20975.24-2020 |
Methods for chemical analysis of aluminium and aluminium alloys—Part 24：Determination of total rare earth content 铝及铝合金化学分析方法 第24部分：稀土总含量的测定 |
China National Standards 24 |
English PDF |
| GB/T 38833-2020 |
240V/336V DC power system technical requirements and test methods for information and telecommunication 信息通信用240V/336V直流供电系统技术要求和试验方法 |
China National Standards 24 |
English PDF |
| GB/T 19212.24-2020 |
Safety of transformers, reactors, power supply units and combinations thereof—Part 24：Particular requirements and test for transformers and power supply units for construction sites 变压器、电抗器、电源装置及其组合的安全 第24部分：建筑工地用变压器和电源装置的特殊要求和试验 |
China National Standards 24 |
English PDF |
| GB/T 7424.24-2020 |
Optical fibre cable generic specification—Part 24: Basic optical cable test procedures—Electrical test methods 光缆总规范 第24部分：光缆基本试验方法 电气试验方法 |
China National Standards 24 |
English PDF |
| GB/T 37999-2019 |
1,1,1,3,3-Pentafluoropropane(HFC-245fa) for industrial use 工业用1,1,1,3,3-五氟丙烷（HFC-245fa） |
China National Standards 24 |
English PDF |
| GB/T 37891.4-2019 |
Cutter arbors with parallel key and tenon drive—Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers 带平键和端键传动的铣刀杆 第4部分：带7:24手动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards 24 |
English PDF |
| GB/T 37891.3-2019 |
Cutter arbors with parallel key and tenon drive—Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers 带平键和端键传动的铣刀杆 第3部分：带7:24自动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards 24 |
English PDF |
| GB/T 22322.1-2019 |
Information technology－Chinese coded character set－24 dot matrix font of Chinese ideogram—Part 1:Song ti 信息技术 中文编码字符集 汉字24点阵字型 第1部分：宋体 |
China National Standards 24 |
English PDF |
| GB/T 19967.2-2019 |
Information technology－Universal coded character set (basic multilingual plane)－24 dot matrix font of Chinese ideogram－Part 2:Hei ti 信息技术 通用编码字符集（基本多文种平面） 汉字24点阵字型 第2部分：黑体 |
China National Standards 24 |
English PDF |
| GB/T 19967.1-2019 |
Information technology－Universal coded character set (basic multilingual plane)－24 dot matrix font of Chinese ideogram－Part 1:Song ti 信息技术 通用编码字符集（基本多文种平面） 汉字24点阵字型 第1部分：宋体 |
China National Standards 24 |
English PDF |
| GB/T 20897.4-2019 |
Inflatable boats—Part 4:Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater 充气艇 第4部分：发动机额定功率为15 kW及以上且船长在8m～24m之间的艇 |
China National Standards 24 |
English PDF |
| GB/T 5169.24-2018 |
Fire hazard testing for electric and electronic products—Part 24: Guidance for assessing the fire hazard—Insulating liquids 电工电子产品着火危险试验 第24部分：着火危险评定导则 绝缘液体 |
China National Standards 24 |
English PDF |
| GB/T 17737.324-2018 |
Coaxial communication cables—Part 1-324: Mechanical test methods—Test for abrasion resistance of cable 同轴通信电缆 第1-324部分：机械试验方法 电缆耐磨性试验 |
China National Standards 24 |
English PDF |
| GB/T 25000.24-2017 |
Systems and software engineering—Systems and software Quality Requirements and Evaluation(SQuaRE)—Part 24: Measurement of data quality 系统与软件工程 系统与软件质量要求和评价（SQuaRE） 第24部分：数据质量测量 |
China National Standards 24 |
English PDF |
| GB/T 3780.24-2017 |
Carbon black－Part 24：Determination of void volume 炭黑 第24部分：空隙体积的测定 |
China National Standards 24 |
English PDF |
| GB/T 4698.24-2017 |
Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 24：Determination of nickel content—Dimethylglyoxime spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第24部分：镍量的测定 丁二酮肟分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards 24 |
English PDF |
| GB/T 13747.24-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 24：Determination of carbon content—Infrared absorption method after high frequency combustion 锆及锆合金化学分析方法 第24部分：碳量的测定 高频燃烧红外吸收法 |
China National Standards 24 |
English PDF |
| GB/T 17466.24-2017 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations—Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment 家用和类似用途固定式电气装置的电器附件安装盒和外壳 第24部分：住宅保护装置和其他电源功耗电器的外壳的特殊要求 |
China National Standards 24 |
English PDF |
| GB/T 14598.24-2017 |
Measuring relays and protection equipment—Part 24: Common format for transient data exchange (COMTRADE) for power systems 量度继电器和保护装置 第24部分：电力系统暂态数据交换(COMTRADE)通用格式 |
China National Standards 24 |
English PDF |
| GB/T 34134-2017 |
SELV plugs and socket-outlets for household and similar purposes 16 A 6 V、12 V、24 V、48 V a.c. and d.c.—Types, basic parameters and dimensions 家用和类似用途安全特低电压（SELV）交流和直流插头插座16 A 6 V、12 V、24 V、48 V 型式、基本参数和尺寸 |
China National Standards 24 |
English PDF |
| GB/T 15670.24-2017 |
Toxicological test methods for pesticides registration—Part 24: Two-generation reproduction toxicity study 农药登记毒理学试验方法 第24部分：两代繁殖毒性试验 |
China National Standards 24 |
English PDF |
| GB/Z 33902-2017 |
Measurement of fluid flow by means of pressure differential devices—Guidelines on the effect of departure from the specifications and operating conditions given in GB/T 2624 and the correction methods 使用差压装置测量流体流量 偏离GB/T2624给出的要求和工作条件的影响及其修正方法 |
China National Standards 24 |
English PDF |
| GB/Z 33875-2017 |
Guidelines for the use of GB/T 2624—2006 GB/T 2624-2006使用指南 |
China National Standards 24 |
English PDF |
| GB/T 17215.324-2017 |
Electricity metering equipment (a.c.)—Particular requirements—Part 24: Static meters for reactive energy at fundamental frequency (classes 0.5S,1S and 1) 交流电测量设备 特殊要求 第24部分：静止式基波频率无功电能表(0.5S级,1S级和1级) |
China National Standards 24 |
English PDF |
| GB/T 3836.24-2017 |
Explosive atmospheres—Part 24: Equipment protection by special protection “s” 爆炸性环境 第24部分：由特殊型“s”保护的设备 |
China National Standards 24 |
English PDF |
| GB/T 7247.5-2017 |
Safety of laser products—Part 5：Manufacturer’s checklist for GB 7247.1 激光产品的安全 第5部分：生产者关于GB 7247.1的检查清单 |
China National Standards 24 |
English PDF |
| GB/T 9258.3-2017 |
Coated abrasives—Grain size analysis—Part 3: Determination of grain size distribution of microgrits P240 to P2500 涂附磨具用磨料 粒度分析 第3部分：微粉P240～P2500粒度组成的测定 |
China National Standards 24 |
English PDF |
| GB/Z 35140-2017 |
Measurement of fluid flow by means of pressure-differential devices—Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of GB/T 2624 用差压装置测量流体流量 GB/T 2624范围之外的孔板、喷嘴和文丘里管的使用指南 |
China National Standards 24 |
English PDF |
| GB/T 18916.24-2016 |
Norm of water intake—Part 24：Long vegetable fibre production 取水定额 第24部分：麻纺织产品 |
China National Standards 24 |
English PDF |
| GB/T 11854-2016 |
Gauges of 7:24 tapers—Inspection 7:24工具圆锥量规 检验 |
China National Standards 24 |
English PDF |
| GB 14883.8-2016 |
National Food Safety Standard-Determination of radioactive materials plutonium - 239 and plutonium - 240 in food 食品安全国家标准 食品中放射性物质钚-239、钚-240的测定 |
China National Standards 24 |
English PDF |
| GB/T 32558-2016 |
Reduction sleeves with 7/24 external and Morse internal taper 带7:24外圆锥和莫氏内圆锥的缩柄套 |
China National Standards 24 |
English PDF |
| GB/T 32556.2-2016 |
Cutter arbors with tenon drive—Part 2: Dimensions of 7:24 taper 带端键传动的铣刀杆 第2部分：带7:24锥柄的铣刀杆尺寸 |
China National Standards 24 |
English PDF |
| GB 19079.24-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 24: Sport aircraft place 体育场所开放条件与技术要求 第24部分：运动飞机场所 |
China National Standards 24 |
English PDF |
| GB/T 10944.5-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 5: Technical specifications of Retention knobs 自动换刀7:24圆锥工具柄 第5部分：拉钉的技术条件 |
China National Standards 24 |
English PDF |
| GB/T 10944.4-2013 |
Tool shanks with 7/24 taper for automatic tool changers—Part 4: Technical specifications for shanks 自动换刀7:24圆锥工具柄 第4部分：柄的技术条件 |
China National Standards 24 |
English PDF |
| GB/T 10944.3-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 3:Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF,JD and JF 自动换刀7:24圆锥工具柄 第3部分：AC、AD、AF、UC、UD、UF、JD 和 JF型拉钉 |
China National Standards 24 |
English PDF |
| GB/T 10944.2-2013 |
Tool shanks with 7/24 taper for automatic tool changers—Part 2：Dimensions and designation of shanks of forms J，JD and JF 自动换刀7:24圆锥工具柄 第2部分：J、JD和JF型柄的尺寸和标记 |
China National Standards 24 |
English PDF |
| GB/T 10944.1-2013 |
Tool shanks with 7/24 taper for automatic tool changers―Part 1：Dimensions and designation of shanks of forms A，AD，AF，U，UD and UF 自动换刀7:24圆锥工具柄 第1部分：A、AD、AF、U、UD和UF型柄的尺寸和标记 |
China National Standards 24 |
English PDF |
| GB/T 11313.24-2013 |
Radio frequency connectors―Part 24: Sectional specification-radio frequency coaxial connectors with screw coupling, typically for use in 75Ω cable networks (type F) 射频连接器 第24部分: 75Ω电缆分配系统用螺纹连接射频同轴连接器（F型）分规范 |
China National Standards 24 |
English PDF |
| GB 30000.24-2013 |
Rules for classification and labelling of chemicals - Part 24: Reproductive toxicity 化学品分类和标签规范 第24部分：生殖毒性 |
China National Standards 24 |
English PDF |
| GB/T 4325.24-2013 |
Methods for chemical analysis of molybdenum - Part 24: Determination of tungsten content - Inductively coupled plasma atomic emission spectrometry 钼化学分析方法 第24部分:钨量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards 24 |
English PDF |
| GB 29280-2012 |
Information technology - Tibetan ideogram coded character set (extension set B) - 24×48 dot matrix font - Bkav bstan bold 信息技术 藏文编码字符集(扩充集B) 24×48点阵字型 甘丹黑体 |
China National Standards 24 |
English PDF |
| GB 29279-2012 |
Information technology - Tibetan ideogram coded character set (extension set B) - 24×48 dot matrix font - Bkav bstan lean 信息技术 藏文编码字符集(扩充集B) 24×48点阵字型 甘丹白体 |
China National Standards 24 |
English PDF |
| GB 29276-2012 |
Information technology - Tibetan ideogram coded character set (basic set & extension set A) - 24×48 dot matrix font - Bkav bstan bold 信息技术 藏文编码字符集(基本集及扩充集A) 24×48点阵字型 甘丹黑体 |
China National Standards 24 |
English PDF |
| GB 29275-2012 |
Information technology - Tibetan ideogram coded character set (basic set & extension set A) - 24×48 dot matrix font - Bkav bstan lean 信息技术 藏文编码字符集(基本集及扩充集A) 24×48点阵字型 甘丹白体 |
China National Standards 24 |
English PDF |
| GB/T 4324.24-2012 |
Methods for chemical analysis of tungsten - Part 24: Determination of phosphorus content - Molybdemum blue photometry 钨化学分析方法 第24部分：磷量的测定 钼蓝分光光度法 |
China National Standards 24 |
English PDF |
| GB/T 18029.24-2012 |
Wheelchairs - Part 24：Requirements and test methods for user-operated stair climbing devices 轮椅车 第24部分：乘坐者操纵的爬楼梯装置的要求和测试方法 |
China National Standards 24 |
English PDF |
| GB/T 26517-2011 |
Determination of 24 preservatives in cosmetics by high performance liquid chromatography method 化妆品中二十四种防腐剂的测定 高效液相色谱法 |
China National Standards 24 |
English PDF |
| GB/T 18268.24-2010 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 24: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and fo 测量、控制和实验室用的电设备 电磁兼容性要求 第24部分：特殊要求 符合IEC 61557-8的绝缘监控装置和符合IEC 61557-9的绝缘故障定位设备的试验配置、工作条件和性能判据 |
China National Standards 24 |
English PDF |
| GB 5007.1-2010 |
Information technology - Chinese ideogram coded character set (basic set) - 24 dot matrix font 信息技术 汉字编码字符集（基本集） 24点阵字型 |
China National Standards 24 |
English PDF |
| GB 25913-2010 |
Information technology - Tibetan ideogram codedcharacter set (extension set B) 24×48 dot matrix font - Ucen Khyungyik 信息技术 藏文编码字符集(扩充集B) 24×48点阵字型 吾坚琼体 |
China National Standards 24 |
English PDF |
| GB 25912-2010 |
Information technology - Tibetan coded character set 24×48 dot matrix font - Petsuk 信息技术 藏文编码字符集 24×48点阵字型 白徂体 |
China National Standards 24 |
English PDF |
| GB 25911-2010 |
Information technology - Tibetan coded character set 24×48 dot matrix font - Drutsa 信息技术 藏文编码字符集 24×48点阵字型 朱匝体 |
China National Standards 24 |
English PDF |
| GB 25909.2-2010 |
Information technology - Uyghur, Kazak, Kirgiz coded character set - 24 Dot matrix font - Part 2: Tuz bold 信息技术 维吾尔文、哈萨克文、柯尔克孜文编码字符集 24点阵字型 第2部分:正文黑体 |
China National Standards 24 |
English PDF |
| GB 25904.3-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 24 Dot matrix fonts - Part 3: Zouzhe Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第3部分：奏折体 |
China National Standards 24 |
English PDF |
| GB 25904.2-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 24 Dot matrix fonts - Part 2: Xingshu Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第2部分：行书体 |
China National Standards 24 |
English PDF |
| GB 25904.1-2010 |
Information technology - Universal multi-octet coded character set - Sibe, Manchu nominal characters, presentation forms and composite characters - 24 Dot matrix fonts - Part 1: Dahei Ti 信息技术 通用多八位编码字符集 锡伯文、满文名义字符、显现字符与合体字 24点阵字型 第1部分：大黑体 |
China National Standards 24 |
English PDF |
| GB 19967.2-2010 |
Information technology - Universal multiple-octet coded character set (Basic Multilingual plane) - 24-dots matrix font of Chinese ideogram - Part 2: Hei Ti 信息技术 通用多八位编码字符集（基本多文种平面） 汉字24点阵字型 第2部分：黑体 |
China National Standards 24 |
English PDF |
| GB 16793.1-2010 |
Information technology - Universal multiple-octet coded character set (CJK unified ideographs) - 24-dot matrix font - Part 1: Song Ti 信息技术 通用多八位编码字符集(CJK统一汉字) 24点阵字型 第1部分：宋体 |
China National Standards 24 |
English PDF |
| GB/T 14034.1-2010 |
Metallic tube connections for fluid power and general use - Part 1: 24°cone connectors 流体传动金属管连接 第1部分：24°锥形管接头 |
China National Standards 24 |
English PDF |
| GB 10395.24-2010 |
Agricultural and forestry machinery - Safety - Part 24：Slurry tankers 农林机械 安全 第24部分：液体肥料施肥车 |
China National Standards 24 |
English PDF |
| GB/T 6117.3-2010 |
End mills - Part 3: Milling cutters with 7：24 taper shanks 立铣刀 第3部分：7:24锥柄立铣刀 |
China National Standards 24 |
English PDF |
| GB/T 14506.24-2010 |
Methods for chemical analysis of silicate rocks - Part 24: Determination of cadmium content 硅酸盐岩石化学分析方法 第24部分：镉量测定 |
China National Standards 24 |
English PDF |
| GB/T 9065.2-2010 |
Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with 24° cone connector ends 液压软管接头 第2部分：24°锥密封端软管接头 |
China National Standards 24 |
English PDF |
| GB/T 25088-2010 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24S (supplementary) for vehicles with 24V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 24V7芯辅助型（24S） |
China National Standards 24 |
English PDF |
| GB/T 9649.24-2009 |
Terminology classification and code for geology and mineral resources - Part 24: Geoeconomy 地质矿产术语分类代码 第24部分：地质经济学 |
China National Standards 24 |
English PDF |
| GB/T 2910.24-2009 |
Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and some other fibers (method using phenol and tetrachloroethane) 纺织品 定量化学分析 第24部分：聚酯纤维与某些其他纤维的混合物（苯酚/四氯乙烷法） |
China National Standards 24 |
English PDF |
| GB 20041.24-2009 |
Conduit systems for cable management - Part 24: Particular requirement - Conduit systems buried underground 电缆管理用导管系统 第24部分：埋入地下的导管系统的特殊要求 |
China National Standards 24 |
English PDF |
| GB/T 23311-2009 |
Aromatic polyimide tape wrapped round copper wire, class 240 240级芳族聚酰亚胺薄膜绕包铜圆线 |
China National Standards 24 |
English PDF |
| GB/T 23310-2009 |
Aromatic polyimide tape wrapped rectangular copper wire，class 240 240级芳族聚酰亚胺薄膜绕包铜扁线 |
China National Standards 24 |
English PDF |
| GB 12951-2009 |
Americium-241 alpha sources for ionization smoke fire detectors 离子感烟火灾探测器用镅241α放射源 |
China National Standards 24 |
English PDF |
| GB/T 12714-2009 |
Americium-241 Beryllium neutron sources 镅铍中子源 |
China National Standards 24 |
English PDF |
| GB 17466.24-2008 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing pro tective devices and similar power consuming devices 家用和类似用途固定式电气装置的电器附件安装盒和外壳 第24部分：住宅保护装置和类似电源功耗装置的外壳的特殊要求 |
China National Standards 24 |
English PDF |
| GB/T 5169.24-2008 |
Fire hazard testing for electric and electronic products - Part 24: Guidance for assessing the fire hazard - Insulating liquids 电工电子产品着火危险试验 第24部分：着火危险评定导则 绝缘液体 |
China National Standards 24 |
English PDF |
| GB 5007.2-2008 |
Information technology - Chinese ideogram coded character set (auxiliary set) - 24 Dot matrix font - Song Ti 信息技术 汉字编码字符集(辅助集) 24点阵字型 宋体 |
China National Standards 24 |
English PDF |
| GB 22323-2008 |
Information technology - Tibetan coded character set (basic set & extension set A) - 24×48 dot matrix font - Ucen khyungyik 信息技术 藏文编码字符集(基本集及扩充集A) 24×48点阵字型 吾坚琼体 |
China National Standards 24 |
English PDF |
| GB 22322.1-2008 |
Information technology - Chinese coded character set - 24-dots matrix font of Chinese ideogram - Part 1: Song ti 信息技术 中文编码字符集 汉字24点阵字型 第1部分：宋体 |
China National Standards 24 |
English PDF |
| GB/T 7672.24-2008 |
Glass-fiber wound winding wires - Part 24: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 玻璃丝包绕组线 第24部分：200级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
China National Standards 24 |
English PDF |
| GB/T 5121.24-2008 |
Methods for chemical analysis of copper and copper alloys - Part 24:Determination of selenium and tellurium content 铜及铜合金化学分析方法 第24部分：硒、碲含量的测定 |
China National Standards 24 |
English PDF |
| GB/T 7095.5-2008 |
Enamelled rectangular copper winding wires - Part 5:Aromatic polyimide enamelled rectangular copper wire, class 240 漆包铜扁绕组线 第5部分：240级芳族聚酰亚胺漆包铜扁线 |
China National Standards 24 |
English PDF |
| GB/T 16456.2-2008 |
End mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分：7:24 锥柄立铣刀 型式和尺寸 |
China National Standards 24 |
English PDF |
| GB/T 3765-2008 |
24° cone connectors - Specification 卡套式管接头技术条件 |
China National Standards 24 |
English PDF |
| GB/T 3764-2008 |
24° cone connectors - Ferrule 卡套 |
China National Standards 24 |
English PDF |
| GB/T 3763-2008 |
24° cone connectors and flared couplings - Hexagon thin nut 管接头用六角薄螺母 |
China National Standards 24 |
English PDF |
| GB/T 3760-2008 |
24° cone connectors - Plug with O-ring 卡套式管接头用锥密封堵头 |
China National Standards 24 |
English PDF |
| GB/T 3759-2008 |
24° cone connectors - Nut 卡套式管接头用连接螺母 |
China National Standards 24 |
English PDF |
| GB/T 3758-2008 |
24° cone connectors - Weld-on nipple 卡套式管接头用锥密封焊接接管 |
China National Standards 24 |
English PDF |
| GB/T 3757-2008 |
24° cone connectors - Weld-in bulkhead straight connector 卡套式过板焊接管接头 |
China National Standards 24 |
English PDF |
| GB/T 3756-2008 |
24° cone connectors - Swivel stud straight adapter with O-ring with stud end 卡套式锥密封组合直通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3755-2008 |
24° cone connectors - Branch tee with O-ring 卡套式锥密封组合三通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3754-2008 |
24° cone connectors - Swivel elbow with O-ring 卡套式锥密封组合弯通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3753-2008 |
24° cone connectors - Adjustable tee 卡套式组合三通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3752-2008 |
24° cone connectors - Adjustable elbow 卡套式组合弯通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3751-2008 |
24° cone connectors - Connector for pressure gauge 卡套式压力表管接头 |
China National Standards 24 |
English PDF |
| GB/T 3750-2008 |
24° cone connectors - Angle swivel screw connector 卡套式铰接管接头 |
China National Standards 24 |
English PDF |
| GB/T 3749-2008 |
24° cone connectors - Bulkhead union elbow 卡套式过板弯通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3748-2008 |
24° cone connectors - Bulkhead union 卡套式过板直通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3747-2008 |
24° cone connectors - Weld male 卡套式焊接管接头 |
China National Standards 24 |
English PDF |
| GB/T 3746-2008 |
24° cone connectors - Union cross 卡套式四通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3745-2008 |
24° cone connectors - Union tee 卡套式三通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3744-2008 |
24° cone connectors - Male run tee 卡套式锥螺纹弯通三通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3743-2008 |
24° cone connectors - Straight thread run tee 卡套式可调向端弯通三通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3742-2008 |
24° cone connectors - Male tee 卡套式锥螺纹三通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3741-2008 |
24° cone connectors - Straight thread tee 卡套式可调向端三通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3740-2008 |
24° cone connectors - Union elbow 卡套式弯通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3739-2008 |
24° cone connectors - Male elbow 卡套式锥螺纹弯通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3738-2008 |
24° cone connectors - Straight thread elbow 卡套式可调向端弯通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3737-2008 |
24° cone connectors - Union 卡套式直通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3736-2008 |
24° cone connectors - Male long 卡套式锥螺纹长管接头 |
China National Standards 24 |
English PDF |
| GB/T 3735-2008 |
24° cone connectors - Straight thread long 卡套式端直通长管接头 |
China National Standards 24 |
English PDF |
| GB/T 3734-2008 |
24° cone connectors - Male 卡套式锥螺纹直通管接头 |
China National Standards 24 |
English PDF |
| GB/T 3733-2008 |
24° cone connectors - Straight thread 卡套式端直通管接头 |
China National Standards 24 |
English PDF |
| GB/T 6109.22-2008 |
Enamelled round winding wire - Part 22: Aromatic polyimide enamelled round copper wire,class 240 漆包圆绕组线 第22部分：240级芳族聚酰亚胺漆包铜圆线 |
China National Standards 24 |
English PDF |
| GB/T 20975.24-2008 |
Methods for chemical analysis of aluminium and aluminium alloys - Part 24：Determination of total rare earth contents 铝及铝合金化学分析方法 第24部分：稀土总含量的测定 |
China National Standards 24 |
English PDF |
| GB/T 20014.24-2008 |
Good agricultural practice - Part 24: Chinese mitten crab net enclosure culture control points and compliance criteria 良好农业规范 第24部分：中华绒螯蟹围拦养殖控制点与符合性规范 |
China National Standards 24 |
English PDF |
| GB/T 328.24-2007 |
Test methods for building sheets for waterproofing - Part 24: Bitumen,plastic and rubber sheets for waterproofing-resistance to impact 建筑防水卷材试验方法 第24部分：沥青和高分子防水卷材 抗冲击性能 |
China National Standards 24 |
English PDF |
| GB/T 5053.1-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage 道路车辆 牵引车与挂车之间电连接器 7芯24V标准型(24N) |
China National Standards 24 |
English PDF |
| GB/T 20717-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 24V15芯型 |
China National Standards 24 |
English PDF |
| GB/T 20716.1-2006 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running gears of vehicles with 24V nominal supply voltage 道路车辆 牵引车和挂车之间的电连接器 第1部分：24V标称电压车辆的制动系统和行走系的连接 |
China National Standards 24 |
English PDF |
| GB/T 20337-2006 |
Milling cutters mounted on centring arbors having a 7:24 taper - lnsered tooth cutters 装在7:24锥柄心轴上的镶齿套式面铣刀 |
China National Standards 24 |
English PDF |
| GB 19967.1-2005 |
Information technology -- Universal multiple-octet coded character set(Basic Multilinggual plane)-24-dots matrix font of Chinese ideogram 信息技术 通用多八位编码字符集(基本多文种平面)汉字24点阵字型 第1部分:宋体 |
China National Standards 24 |
English PDF |
| GB 19212.24-2005 |
Safety of power transformers, power supply units and similar devices -- Part 24: Particular requirements for transformers for construction sites 电力变压器、电源装置和类似产品的安全 第24部分：建筑工地用变压器的特殊要求 |
China National Standards 24 |
English PDF |
| GB/T 17980.124-2004 |
Pesticide--Guidelines for the field efficacy trials(Ⅱ)--Part 124:Fungicides againstalternaria leaf spot of apple 农药 田间药效试验准则(二) 第124部分:杀菌剂防治苹果斑点落叶病 |
China National Standards 24 |
English PDF |
| GB/T 11854-2003 |
Gauges of 7/24 tapers 7/24工具圆锥量规 |
China National Standards 24 |
English PDF |
| GB/T 17645.24-2003 |
Industrial automation systems and integration--Parts library--Part 24: Logical resources: Logical model of supplier library 工业自动化系统与集成 零件库 第24部分: 逻辑资源: 供应商库的逻辑模型 |
China National Standards 24 |
English PDF |
| GB/T 3837-2001 |
7/24 tapers for tool shanks for manual changing 7∶24手动换刀刀柄圆锥 |
China National Standards 24 |
English PDF |
| GB/T 5271.24-2000 |
Information technology--Vocabulary--Part 24:Computer-integrated manufacturing 信息技术 词汇 第24部分:计算机集成制造 |
China National Standards 24 |
English PDF |
| GB/T 9258.3-2000 |
Coatedabrasives--Grain size analysis--Part 3:Determination of grain size distributionof microgrits P240 to P2500 涂附磨具用磨料 粒度分析 第3部分:微粉P240～P2500粒度组成的测定 |
China National Standards 24 |
English PDF |
| GB/T 16960.1-1997 |
Information technology--Tibetan coded character set (basic set)--24×48 Dots matrix font--Part 1:Bai Ti 信息技术 藏文编码字符集(基本集) 24×48点阵字型 第1部分:白体 |
China National Standards 24 |
English PDF |
| GB/T 16683-1996 |
24×24 Dot matrix font set and data set of Yi character for information interchange 信息交换用彝文字符24×24点阵字模集及数据集 |
China National Standards 24 |
English PDF |
| GB/T 14398-1993 |
Data communication--Arrangements for DTE to DTE physical connection using V.24 and X.24 interchange circuits 数据通信 使用V.24和X.24互换电路的DTE到DTE物理连接的接法 |
China National Standards 24 |
English PDF |
| GB/T 13430-1992 |
Performance requirements for 24-channel submarine coaxial cable carrier telephone equipment 24路海底同轴电缆载波电话设备技术要求 |
China National Standards 24 |
English PDF |
| GB/T 13425-1992 |
Measurement for 24-channel submarine coaxial cable carrier telephone equipment 24路海底同轴电缆载波电话设备测试方法 |
China National Standards 24 |
English PDF |
| GB 14883.8-1994 |
Examination of radioactive materials for foods--Determination of plutonium-239，plutonium-240 食品中放射性物质检验 钚-239、钚-240的测定 |
China National Standards 24 |
English PDF |
| GB/T 12509-1990 |
16， 24 Dot matrix font setand data set of Uighur character for information interchange 信息交换用维吾尔文16、24点阵字母集及数据集 |
China National Standards 24 |
English PDF |
| GB/T 12051-1989 |
24 Dot matrix font set and data set of Mongolian characters for information processing 信息处理用蒙古文24点阵字模集及数据集 |
China National Standards 24 |
English PDF |
| GB/T 9541-1988 |
2400 bits per second duplex modem using the echo cancellation technique standardized for use on the general switched telephone network and on point-to-point 2 wire leased telephone-type-circuits 在普通电话交换网和点对点二线租用电话型电路上使用标准化的回波抵消技术的2400比特/ 秒双工调制解调器 |
China National Standards 24 |
English PDF |
| GB/T 9363-1988 |
Information processing--9-Track， 12.7mm (0.5in) wide magnetictape for information interchange--Format and recording，using group coding at 246 cpmm(6250 cpi) 信息处理 信息交换用9磁道12.7mm(0.5in)磁带成组编码方式246 cpmm (6250 cpi) 的格式及记录 |
China National Standards 24 |
English PDF |
| GB/T 7625-1987 |
2400/1200 bits per second modem standardized for use in the general switched telephone network 在电话自动交换网上使用的标准化 2400/1200比特/秒调制解调器 |
China National Standards 24 |
English PDF |
| GB/T 7624-1987 |
2400 bits persecond modem standardized for use on 4-wire leased telephone type circuits 在四线租用电话型电路上使用的标准化2400比特/秒调制解调器 |
China National Standards 24 |
English PDF |
| Find out:154Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
