Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 22459.9-2024 |
Refractory mud - Part 9: Test method for shear bond strength at room temperature {译} 耐火泥浆-第9部分：常温抗剪粘接强度试验方法 |
China National Standards A method temperature |
 English PDF |
| GB/T 44030-2024 |
Metallic materials-High temperature compression test methods {译} 金属材料-高温压缩试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 43853-2024 |
High-temperature Friction and Wear Performance Test of Laser Repair Layer-Ball-disc Method {译} 激光修复层高温摩擦磨损性能试验-球-盘法 |
China National Standards A method temperature |
English PDF |
| GB/T 43870.1-2024 |
Measurement method of Curie temperature of magnetic materials - Part 1: permanent magnetic materials {译} 磁性材料居里温度的测量方法-第1部分：永磁材料 |
China National Standards A method temperature |
English PDF |
| GB/T 43870.2-2024 |
Measurement method of Curie temperature of magnetic materials - Part 2: soft magnetic materials {译} 磁性材料居里温度的测量方法-第2部分：软磁材料 |
China National Standards A method temperature |
English PDF |
| GB/T 43873-2024 |
Test method for upper and lower limit temperature of ultra-thin glass annealing {译} 超薄玻璃退火上下限温度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 43997.1-2024 |
Surface Temperature Thermal Infrared Remote Sensing Inversion - Part 1: Single Channel Method {译} 地表温度热红外遥感反演-第1部分：单通道法 |
China National Standards A method temperature |
English PDF |
| GB/T 43997.2-2024 |
Surface Temperature Thermal Infrared Remote Sensing Inversion - Part 2: Split Window Method {译} 地表温度热红外遥感反演-第2部分：分裂窗法 |
China National Standards A method temperature |
English PDF |
| GB/T 44006-2024 |
Infrared Image Temperature Representation Rules - RGB Method {译} 红外图像温度表示规则-RGB法 |
China National Standards A method temperature |
English PDF |
| GB/T 6803-2023 |
Drop weight test method for non-plastic transition temperature of ferritic steels {译} 铁素体钢的无塑性转变温度落锤试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 5072-2023 |
Refractory materials - Normal temperature compressive strength test method {译} 耐火材料 常温耐压强度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 43296-2023 |
Test method for room temperature bending fatigue properties of fine ceramics {译} 精细陶瓷室温弯曲疲劳性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 1965-2023 |
Porous ceramics - test method for room temperature flexural strength {译} 多孔陶瓷 室温弯曲强度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 1964-2023 |
Porous ceramics - Test method for compressive strength at room temperature {译} 多孔陶瓷 室温压缩强度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 43255-2023 |
Test method for low temperature cold starting performance of fuel cell electric vehicles {译} 燃料电池电动汽车低温冷起动性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 43118-2023 |
Corrosion of metals and alloys Test method for high-temperature corrosion of metallic materials under the action of deposits of salt, ash or other substances {译} 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 43115-2023 |
Metallic materials - Sheet and strip - Room temperature shear test methods {译} 金属材料 薄板和薄带 室温剪切试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 43092-2023 |
Electrochemical performance testing of lithium-ion battery cathode materials High temperature performance testing method {译} 锂离子电池正极材料电化学性能测试 高温性能测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 3780.30-2023 |
Carbon black Part 30: Determination of high temperature volatiles Thermogravimetric method {译} 炭黑 第30部分：高温挥发物的测定 热重法 |
China National Standards A method temperature |
English PDF |
| GB/T 42657-2023 |
Test method for infrared refractive index temperature coefficient of infrared optical glass - vertical incidence method {译} 红外光学玻璃红外折射率温度系数测试方法 垂直入射法 |
China National Standards A method temperature |
English PDF |
| GB/T 42653-2023 |
Glass high temperature viscosity test method {译} 玻璃高温黏度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 42667-2023 |
Test method for room temperature isobiaxial bending strength of fine ceramics - double loop method {译} 精细陶瓷室温等双轴弯曲强度试验方法 双环法 |
China National Standards A method temperature |
English PDF |
| GB/T 42655-2023 |
Test method for high temperature compression properties of continuous fiber reinforced ceramic matrix composites {译} 连续纤维增强陶瓷基复合材料高温压缩性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 42910-2023 |
Test method for high temperature compression shear strength of inorganic adhesives {译} 无机胶粘剂高温压缩剪切强度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 42913-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids {译} 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 42912-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids {译} 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 42900-2023 |
High strain rate and high temperature compression test method for metallic materials {译} 金属材料 高应变速率高温压缩试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 42919.6-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology {译} 塑料 导热系数和热扩散系数的测定 第6部分：基于温度调制技术的比较法 |
China National Standards A method temperature |
English PDF |
| GB/T 42919.3-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method {译} 塑料 导热系数和热扩散系数的测定 第3部分：温度波分析法 |
China National Standards A method temperature |
English PDF |
| GB/T 40261.1-2023 |
Ergonomics of the thermal environment Assessment of the thermal environment in vehicles Part 1: Principles and methods of heat stress assessment and equivalent temperature determination {译} 热环境的人类工效学 交通工具内热环境评价 第1部分:热应激评估原理与方法和等效温度测定 |
China National Standards A method temperature |
English PDF |
| GB/T 5989-2023 |
Refractories - Test method for softening temperature under load (differential heating method) {译} 耐火材料 荷重软化温度试验方法(示差升温法) |
China National Standards A method temperature |
English PDF |
| GB/T 42516-2023 |
Chemical analysis method of high temperature shape memory alloy - determination of platinum content - thiourea complex precipitation method {译} 高温形状记忆合金化学分析方法 铂含量的测定 硫脲络合沉淀法 |
China National Standards A method temperature |
English PDF |
| GB/T 42603.2-2023 |
Moderate temperature molding materials for investment casting - Part 2: Test methods for serviceability {译} 熔模铸造中温模料 第2部分:使用性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 42603.1-2023 |
Moderate temperature molding materials for investment casting - Part 1: Test methods for physical properties {译} 熔模铸造中温模料 第1部分：物理性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 4937.23-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life {译} 半导体器件 机械和气候试验方法 第23部分：高温工作寿命 |
China National Standards A method temperature |
English PDF |
| GB/T 4937.42-2023 |
Semiconductor devices - Mechanical and climatic test methods - Part 42: Temperature and humidity storage {译} 半导体器件 机械和气候试验方法 第42部分：温湿度贮存 |
China National Standards A method temperature |
English PDF |
| GB/T 42368-2023 |
Method for Determination of Explosive Limits of Combustible Gas (Steam) under High Temperature and High Pressure Conditions {译} 高温高压条件下可燃气体（蒸气）爆炸极限测定方法 |
China National Standards A method temperature |
English PDF |
| GB/T 5170.18-2022 |
Test methods for environmental test equipment - Part 18: Temperature/humidity combined cycle test equipment {译} 环境试验设备检验方法 第18部分：温度/湿度组合循环试验设备 |
China National Standards A method temperature |
English PDF |
| GB/T 41654-2022 |
Corrosion of metals and alloys - Method for metallographic examination of specimens after exposure to high temperature corrosive environments {译} 金属和合金的腐蚀 在高温腐蚀环境下暴露后试样的金相检验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 41605-2022 |
Silicon nitride materials for rolling bearing balls - Test method for indentation fracture resistance at room temperature - Indentation method {译} 滚动轴承球用氮化硅材料 室温压痕断裂阻力试验方法 压痕法 |
China National Standards A method temperature |
English PDF |
| GB/T 41490-2022 |
Test method for rolling contact fatigue of silicon nitride ceramics at room temperature ball plate method {译} 氮化硅陶瓷 室温下滚动接触疲劳试验方法 球板法 |
China National Standards A method temperature |
English PDF |
| GB/T 24581-2022 |
Test method for Ⅲ and Ⅴ impurities content in single crystal silicon—Low temperature FT-IR analysis method 硅单晶中III、V族杂质含量的测定 低温傅立叶变换红外光谱法 |
China National Standards A method temperature |
English PDF |
| GB/T 42261-2022 |
Metal and other inorganic coatings - thermal cycle test method for thermal barrier coatings under temperature gradient {译} 金属及其他无机覆盖层 温度梯度下热障涂层热循环试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards A method temperature |
English PDF |
| GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat {译} 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 |
China National Standards A method temperature |
English PDF |
| GB/T 12085.22-2022 |
Optics and photonics - Environmental test methods - Part 22: Combined test of low temperature, high temperature or temperature change with impact or random vibration {译} 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验 |
China National Standards A method temperature |
English PDF |
| GB/T 12085.2-2022 |
Optics and photonics - Environmental test methods - Part 2: Low temperature, high temperature, damp heat {译} 光学和光子学 环境试验方法 第2部分：低温、高温、湿热 |
China National Standards A method temperature |
English PDF |
| GB/T 41822-2022 |
Hot helium leak detection method for high temperature pressure-bearing parts of nuclear fusion reactor {译} 核聚变堆高温承压部件的热氦检漏方法 |
China National Standards A method temperature |
English PDF |
| GB/T 41641-2022 |
Measurement of mechanical properties - Tensile test method for REBCO strip at room temperature {译} 力学性能测量 REBCO带材室温拉伸试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 41872-2022 |
Heat exchangers used in refrigeration systems and heat pumps—Temperature, pressure and velocity three-field synergy performance test and evaluation method {译} 制冷系统及热泵用换热器 温度、压力和速度三场协同的性能测试和评价方法 |
China National Standards A method temperature |
English PDF |
| GB/T 40404-2021 |
Slag material—Measurement of melting temperature—High temperature metallographic method 渣类材料 熔化温度的测定 高温金相法 |
China National Standards A method temperature |
English PDF |
| GB/T 40396-2021 |
Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis（DMA） 聚合物基复合材料玻璃化转变温度试验方法 动态力学分析法（DMA） |
China National Standards A method temperature |
English PDF |
| GB/T 40320-2021 |
Measuring method for mechanical melting temperature of aluminum alloy 铝合金力学熔点测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 1425-2021 |
Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis 贵金属及其合金熔化温度范围的测定 热分析试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 40286-2021 |
The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization 低温双循环余热回收利用装置性能测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 31838.7-2021 |
Solid insulating materials - Dielecteric and resistive properties - Part 7: Resistive properties(DC method) - Measurement of volume resistance and volume resistivity at elevated temperatures 固体绝缘材料 介电和电阻特性 第7部分：电阻特性(DC方法) 高温下测量体积电阻和体积电阻率 |
China National Standards A method temperature |
English PDF |
| GB/T 19216.3-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3:Test method for fire with shock at a temperature of at least 830℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure 在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 19216.2-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions - Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not 在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 19216.1-2021 |
Circuit integrity test for electric cables or optical fiber cables under fire conditions-Part 1:Test method for fire with shock at atemperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/ 1 kV and with an overall diameter exceed 在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 39933-2021 |
Rotational moulding—Test method for low temperature impact 滚塑成型 低温冲击试验 |
China National Standards A method temperature |
English PDF |
| GB/T 39828-2021 |
Test method for determining elastic modulus of thick ceramic coating at elevated temperature 陶瓷厚涂层的高温弹性模量试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 19136-2021 |
Testing method of the accelerated storage stability at elevated temperature for pesticides 农药热储稳定性测定方法 |
China National Standards A method temperature |
English PDF |
| GB/T 228.1-2021 |
Metallic materials—Tensile testing—Part 1: Method of test at room temperature 金属材料 拉伸试验 第1部分:室温试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 40794-2021 |
Measurement method of irreversible magnetic flux loss due to high temperature of rare earth permanent magnet 稀土永磁材料高温磁通不可逆损失检测方法 |
China National Standards A method temperature |
English PDF |
| GB/T 38924.2-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 2: Low-temperature test 民用轻小型无人机系统环境试验方法 第2部分: 低温试验 |
China National Standards A method temperature |
English PDF |
| GB/T 38924.3-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 3: High-temperature test 民用轻小型无人机系统环境试验方法 第3部分：高温试验 |
China National Standards A method temperature |
English PDF |
| GB/T 38924.4-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 4: Temperature and altitude test 民用轻小型无人机系统环境试验方法 第4部分：温度和高度试验 |
China National Standards A method temperature |
English PDF |
| GB/T 38948-2020 |
Evaluation method for the cracking resistance of asphalt mixture at low temperature 沥青混合料低温抗裂性能评价方法 |
China National Standards A method temperature |
English PDF |
| GB/T 38912-2020 |
Test method for closed-end burst of zirconium tubes at room temperature 锆管室温闭端爆破试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 38804-2020 |
Test method for oxidation of metallic materials exposed in high-temperature steam 金属材料高温蒸汽氧化试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 2423.27-2020 |
Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests 环境试验 第2部分：试验方法 试验方法和导则：温度/低气压或温度/湿度/低气压综合试验 |
China National Standards A method temperature |
English PDF |
| GB/T 5137.3-2020 |
Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests 汽车安全玻璃试验方法 第3部分：耐辐照、高温、潮湿、燃烧和耐模拟气候试验 |
China National Standards A method temperature |
English PDF |
| GB/T 38534-2020 |
Test method for tensile properties of oriented fibre reinforced polymer matrix composite materials at ultra-low temperature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 38515-2020 |
The method for high temperature mechanical properties of quartz fabric-reinforced resin matrix composite materials 石英纤维织物增强树脂基复合材料高温力学性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 39682-2020 |
Fine ceramics—Determination of elastic modulus at high temperature or ultra-high temperature—Split ring relative method 精细陶瓷 高温和超高温弹性模量的测定 缺口环相对法 |
China National Standards A method temperature |
English PDF |
| GB/T 32065.8-2020 |
Environmental test methods for oceanographic instruments—Part 8：Change of temperature test 海洋仪器环境试验方法 第8部分：温度变化试验 |
China National Standards A method temperature |
English PDF |
| GB/T 38298-2019 |
Test method of auto-ignition temperature for solid chemicals 固体化学品自动点火温度的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards A method temperature |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards A method temperature |
English PDF |
| GB/T 38430-2019 |
Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 38426-2019 |
Test method for thermal resistance and use temperature of sleeping bags 睡袋的热阻和使用温度的测定方法 |
China National Standards A method temperature |
English PDF |
| GB/T 38298-2019 |
Test method of auto-ignition temperature for solid chemicals 固体化学品自动点火温度的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards A method temperature |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards A method temperature |
English PDF |
| GB/T 37945-2019 |
Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC) 有机发光二极管显示器用材料 玻璃化转变温度测试方法 差热法 |
China National Standards A method temperature |
English PDF |
| GB/T 37783-2019 |
Metallic materials—High strain rate tensile test method at elevated temperature 金属材料 高应变速率高温拉伸试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 228.3-2019 |
Metallic materials—Tensile testing—Part 3: Method of test at low temperature 金属材料 拉伸试验 第3部分：低温试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 13477.13-2019 |
Test method for building sealants－Part 13：Determination of adhesion/cohesion properties at variable temperatures 建筑密封材料试验方法 第13部分：冷拉-热压后粘结性的测定 |
China National Standards A method temperature |
English PDF |
| GB/T 1634.1-2019 |
Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 37631-2019 |
Man-made fiber—Test method for thermal decomposition temperature 化学纤维 热分解温度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards A method temperature |
English PDF |
| GB/T 21451.5-2019 |
Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 5: Measurement of temperature in marine vessels 石油和液体石油产品 储罐中液位和温度自动测量法 第5部分：油船舱中的温度测量 |
China National Standards A method temperature |
English PDF |
| GB/T 21451.2-2019 |
Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 2:Measurement of level in marine vessels 石油和液体石油产品 储罐中液位和温度自动测量法 第2部分: 油船舱中的液位测量 |
China National Standards A method temperature |
English PDF |
| GB/T 5170.19-2018 |
Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment 环境试验设备检验方法-第19部分：温度、振动(正弦)综合试验设备 |
China National Standards A method temperature |
English PDF |
| GB/T 14235.1-2018 |
Low temperature pattern wax material for investment casting—Part 1: Testing methods for physical properties 熔模铸造低温模料-第1部分：物理性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 14235.2-2018 |
Low temperature pattern wax materials for investment casting—Part 2: Testing methods for usability properties 熔模铸造低温模料-第2部分：使用性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 37052-2018 |
Test methods for nominal module operating temperature of building integrated photovoltaic(BIPV) modules 光伏建筑一体化（BIPV）组件电池额定工作温度测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 13477.12-2018 |
Test method for building sealants－Part 12：Determination of adhesion/cohesion properties at constant temperature 建筑密封材料试验方法-第12部分：同一温度下拉伸-压缩循环后粘结性的测定 |
China National Standards A method temperature |
English PDF |
| GB/T 36214.4-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法 |
China National Standards A method temperature |
English PDF |
| GB/T 36214.3-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法 |
China National Standards A method temperature |
English PDF |
| GB/T 36264-2018 |
Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment 超高温氧化环境下纤维复合材料拉伸强度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 4937.15-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 15: Resistance to soldering temperature for through-hole mounted devices 半导体器件 机械和气候试验方法 第15部分：通孔安装器件的耐焊接热 |
China National Standards A method temperature |
English PDF |
| GB/T 4937.11-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 11: Rapid change of temperature—Two-fluid-bath method 半导体器件 机械和气候试验方法 第11部分：快速温度变化 双液槽法 |
China National Standards A method temperature |
English PDF |
| GB/T 3682.2-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 24276-2017 |
A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation 通过计算进行低压成套开关设备和控制设备温升验证的一种方法 |
China National Standards A method temperature |
English PDF |
| GB/T 34699-2017 |
Test method of physical properties for low temperature sulphur tail gas hydrogenation catalyst 低温硫磺尾气加氢催化剂物理性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 34702-2017 |
Analytical method of chemical composition for low temperature sulphur tail gas hydrogenation catalyst 低温硫磺尾气加氢催化剂化学成分分析方法 |
China National Standards A method temperature |
English PDF |
| GB/T 34520.7-2017 |
Test methods for continuous silicon carbide fiber—Part 7 ：High temperature strength retention rate 连续碳化硅纤维测试方法 第7部分：高温强度保留率 |
China National Standards A method temperature |
English PDF |
| GB/T 34551-2017 |
Test method for alkali resistance of glass fiber reinforced polymer bars in high temperature condition 玻璃纤维增强复合材料筋高温耐碱性试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 13242-2017 |
Iron ores—Low-temperature disintegration test—Method using cold tumbling after static reduction 铁矿石 低温粉化试验 静态还原后使用冷转鼓的方法 |
China National Standards A method temperature |
English PDF |
| GB/T 34483-2017 |
β transus temperature determination methods of zirconium and zirconium alloys 锆及锆合金β相转变温度测定方法 |
China National Standards A method temperature |
English PDF |
| GB/T 21451.6-2017 |
Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated) 石油和液体石油产品 储罐中液位和温度自动测量法 第6部分：带压罐（非冷冻）中的温度测量 |
China National Standards A method temperature |
English PDF |
| GB/T 1817-2017 |
Test method for impact toughness of cemented carbides at room temperature 硬质合金常温冲击韧性试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 34618-2017 |
Temperature detection method for judging internal leakage faults of working valves in steam drainage steam 蒸汽疏水系统在线阀门内漏温度检测方法 |
China National Standards A method temperature |
English PDF |
| GB/T 34233-2017 |
Test method of activity for low temperature sulphur tail gas hydrogenation catalyst 低温硫磺尾气加氢催化剂活性试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 34228-2017 |
Dipped heat-resistant canvas―Test method for adhesion strength at high temperature 耐热浸胶帆布 高温粘合性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 34108-2017 |
Metallic materials—High strain rate compression test method at ambient temperature 金属材料 高应变速率室温压缩试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 33861-2017 |
Testing method of energy efficiency for temperature test chambers 高低温试验箱能效测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 7314-2017 |
Metallic materials—Compression test method at room temperature 金属材料 室温压缩试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 35306-2017 |
Test method for carbon and oxygen content of single crystal silicon—Low temperature fourier transform infrared spectrometry 硅单晶中碳、氧含量的测定 低温傅立叶变换红外光谱法 |
China National Standards A method temperature |
English PDF |
| GB/T 5170.2-2017 |
Inspection methods for environmental testing equipments—Part 2: Temperature testing equipments 环境试验设备检验方法 第2部分：温度试验设备 |
China National Standards A method temperature |
English PDF |
| GB/T 5170.10-2017 |
Inspection methods for environmental testing equipments—Part 10：Combined high and low temperature/low air pressure testing equipments 环境试验设备检验方法 第10部分：高低温低气压试验设备 |
China National Standards A method temperature |
English PDF |
| GB/T 33370-2016 |
The measuring method for copper and copper alloys soften temperature 铜及铜合金软化温度的测定方法 |
China National Standards A method temperature |
English PDF |
| GB/T 33466.1-2016 |
Rigid PVC pipes—Differential scanning calorimetry(DSC) method—Part 1: Measurement of the processing temperature 硬聚氯乙烯管材 差示扫描量热法(DSC) 第1部分：加工温度的测量 |
China National Standards A method temperature |
English PDF |
| GB/T 33291-2016 |
Measurement method of pressure-composition-temperature for reversable hydrogen asborption & desorption of hydrides 氢化物可逆吸放氢压力-组成-等温线（P-C-T）测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 33067-2016 |
Analysis method of chemical composition for Pd deoxidant catalyst at the middle temperature 中温钯系脱氧剂化学成分分析方法 |
China National Standards A method temperature |
English PDF |
| GB/T 32967.1-2016 |
Metallic materials—Torsional test method at high strain rates—Part 1: Method of test at room temperature 金属材料 高应变速率扭转试验 第1部分：室温试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 32498-2016 |
Metal matrix composites—Tensile testing—Method of test at ambient temperature 金属基复合材料 拉伸试验 室温试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 11297.10-2015 |
Test method for Curie temperature of pyroelectric materials 热释电材料居里温度Tc的测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 7166-2015 |
Characteristics and test methods for in-core and primary coolant circuit temperature sensors in nuclear power plants 核电厂反应堆堆芯和主冷却剂回路内温度计的特性和试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 21451.1-2015 |
Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 1: Measurement of level in atmospheric tanks 石油和液体石油产品 储罐中液位和温度自动测量法 第1部分：常压罐中的液位测量 |
China National Standards A method temperature |
English PDF |
| GB/T 31967.1-2015 |
Test method for physical property of rare earth permanent magnetic materials—Part 1：Determination of temperature coefficient of magnetic flux 稀土永磁材料物理性能测试方法 第1部分：磁通温度特性的测定 |
China National Standards A method temperature |
English PDF |
| GB/T 31923.2-2015 |
Iron ores for blast furnace feedstocks—Determinaction of low-temperature reduction-disintegration indices by static method—Part 2: Reduction with CO and N2 高炉炉料用铁矿石 低温还原粉化静态试验 第2部分：与CO和N2的反应 |
China National Standards A method temperature |
English PDF |
| GB/T 31923.1-2015 |
Iron ores for blast furnace feedstocks—Determination of low-temperature reduction-disintegration indices by static method—Part 1: Reduction with CO、CO2、H2 and N2 高炉炉料用铁矿石 低温还原粉化静态试验 第1部分：与CO、CO2、H2和N2的反应 |
China National Standards A method temperature |
English PDF |
| GB/T 228.2-2015 |
Metallic materials—Tensile testing—Part 2: Method of test at elevated temperature 金属材料 拉伸试验 第2部分：高温试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 31780-2015 |
Critical temperature measurement—Critical temperature of composite superconductors by a resistance method 临界温度测量 电阻法测复合超导体临界温度 |
China National Standards A method temperature |
English PDF |
| GB/T 31544-2015 |
Test method for elastic properties of glass at high temperatures—Impulse excitation of vibration 玻璃材料高温弹性性能试验方法 脉冲激振法 |
China National Standards A method temperature |
English PDF |
| GB/T 31536-2015 |
Analytical method of chemical composition for copper series arsenic removal agent at room temperature 常温铜系脱砷剂化学成分分析方法 |
China National Standards A method temperature |
English PDF |
| GB/T 31405-2015 |
Standard test method for cathodic disbonding of pipeline coatings subjected to elevated temperatures 管道耐蚀涂敷层高温阴极剥离试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 30648.5-2015 |
Paints and varnishes—Determination of resistance to liquids—Part 5: Temperature-gradient oven methods 色漆和清漆 耐液体性的测定 第5部分：采用具有温度梯度的烘箱法 |
China National Standards A method temperature |
English PDF |
| GB/T 30651-2014 |
Test method of flowability of petrolatum tape at high temperature 矿脂防蚀带耐高温流动性检测方法 |
China National Standards A method temperature |
English PDF |
| GB/T 30650-2014 |
Test method of operability of petrolatum tape at low temperature 矿脂防蚀带低温可操作性检测方法 |
China National Standards A method temperature |
English PDF |
| GB/T 1682-2014 |
Rubber,vulcanized―Determination of low-temperature brittleness―Single test piece method 硫化橡胶 低温脆性的测定 单试样法 |
China National Standards A method temperature |
English PDF |
| GB/T 15256-2014 |
Rubber, vulcanized or thermoplastic―Determination of low-temperature brittleness（multiple test piece method） 硫化橡胶或热塑性橡胶 低温脆性的测定(多试样法) |
China National Standards A method temperature |
English PDF |
| GB/T 31192-2014 |
Test method of arsenic content for copper series arsenic removal capacity at room temperature 常温铜系脱砷剂砷容试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 31191-2014 |
Test method of manganese deoxidizer deoxy performance at room temperature 常温锰系脱氧剂脱氧性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 30824-2014 |
Testing method for temperature uniformity of gas heat treatment furnace 燃气热处理炉温度均匀性测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 30518-2014 |
Determination of dissolved residues of liquefied petroleum gases―High temperature gas chromatographic method 液化石油气中可溶性残留物的测定 高温气相色谱法 |
China National Standards A method temperature |
English PDF |
| GB/T 11145-2014 |
Standard test method for measurement of low-temperature viscosity of lubricants―Brookfield viscometer method 润滑剂低温黏度的测定 勃罗克费尔特黏度计法 |
China National Standards A method temperature |
English PDF |
| GB/T 30103.1-2013 |
Methods of testing for thermal performance on cold store―Part 1: Temperature and humidity testing 冷库热工性能试验方法 第1部分：温度和湿度检测 |
China National Standards A method temperature |
English PDF |
| GB/T 30109-2013 |
AC loss measurements―Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method 交流损耗测量 液氦温度下横向交变磁场中圆形截面超导线总交流损耗的探测线圈测量法 |
China National Standards A method temperature |
English PDF |
| GB/T 5169.13-2013 |
Fire hazard testing for electric and electronic product―Part 13：Glowing/hot-wire based test methods―Glow-wire ignition temperature (GWIT) test method for materials 电工电子产品着火危险试验 第13部分：灼热丝/热丝基本试验方法 材料的灼热丝起燃温度（GWIT）试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 29174-2012 |
Thermal analysis test method for constant-temperature stability of materials 物质恒温稳定性的热分析试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 29459.2-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 2：Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分：室温下拉伸性能的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 28958-2012 |
Test methods of low temperature performance for passenger car 乘用车低温性能试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 2423.34-2012 |
Environmental testing - Part 2: Test methods - Test Z/AD: Composite temperature/humidity cyclic test 环境试验 第2部分：试验方法 试验Z/AD：温度/湿度组合循环试验 |
China National Standards A method temperature |
English PDF |
| GB/T 2423.22-2012 |
Environmental testing - Part 2: Tests methods - Test N: Change of temperature 环境试验 第2部分：试验方法 试验N：温度变化 |
China National Standards A method temperature |
English PDF |
| GB/T 9292-2012 |
Surface active agents method of testing of the migration action of levelling agents for disperse dyes on dyeing polyester textiles under high temperature condition 表面活性剂 高温条件下分散染料染聚酯织物用匀染剂的移染性测试法 |
China National Standards A method temperature |
English PDF |
| GB/T 28473.2-2012 |
Temperature transmitters for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance 工业过程测量和控制系统用温度变送器 第2部分：性能评定方法 |
China National Standards A method temperature |
English PDF |
| GB/T 27970-2011 |
Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures 非金属垫片材料烧失量试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 12085.21-2011 |
Optics and optical instruments - Environmental test methods - Part 21: Combined low pressure and ambient temperature or dry heat 光学和光学仪器 环境试验方法 第21部分：低压与大气温度、高温综合试验 |
China National Standards A method temperature |
English PDF |
| GB/T 7962.4-2010 |
Test methods of colourless optical glass - Part 4: Temperature coefficient of refractive index 无色光学玻璃测试方法 第4部分：折射率温度系数 |
China National Standards A method temperature |
English PDF |
| GB/T 7962.16-2010 |
Test methods of colourless optical glass - Part 16: Linear thermal expansion coefficient，transformation temperature and yield point temperature 无色光学玻璃测试方法 第16部分：线膨胀系数、转变温度和弛垂温度 |
China National Standards A method temperature |
English PDF |
| GB/T 228.1-2010 |
Metallic materials - Tensile testing - Part 1 : Method of test at room temperature 金属材料 拉伸试验 第1部分：室温试验方法 |
China National Standards A method temperature |
English PDF |
| GB 12476.8-2010 |
Electrical apparatus for use in the presence of combustible dust - Part 8: Test methods - Methods for determining the minimum ignition temperatures of dust 可燃性粉尘环境用电气设备 第8部分： 试验方法 确定粉尘最低点燃温度的方法 |
China National Standards A method temperature |
English PDF |
| GB/T 23595.7-2010 |
Test methods of rare earth yellow phosphor for white LED lamps - Part 7: Determination of temperature quenching 白光LED灯用稀土黄色荧光粉试验方法 第7部分：热猝灭性的测定 |
China National Standards A method temperature |
English PDF |
| GB/T 14634.7-2010 |
Test methods of rare earth three-band phosphors for fluorescent lamps - Part 7: Determination of temperature quenching 灯用稀土三基色荧光粉试验方法 第7部分：热猝灭性的测定 |
China National Standards A method temperature |
English PDF |
| GB/T 24581-2009 |
Test method for low temperature FT-IR analysis of single crystal silicon for Ⅲ-Ⅴ impurities 低温傅立叶变换红外光谱法测量硅单晶中III、V族杂质含量的测试方法 |
China National Standards A method temperature |
English PDF |
| GB/T 24392-2009 |
Standard method of measurement of lamp cap temperature rise 灯头温升的测量方法 |
China National Standards A method temperature |
English PDF |
| GB/T 24204-2009 |
Iron ores for blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by dynamic method 高炉炉料用铁矿石 低温还原粉化率的测定 动态试验法 |
China National Standards A method temperature |
English PDF |
| GB/T 24276-2009 |
A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear 评估部分型式试验的低压成套开关设备和控制设备（PTTA）温升的外推法 |
China National Standards A method temperature |
English PDF |
| GB/T 24270-2009 |
Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials 永磁材料磁性能温度系数测量方法 |
China National Standards A method temperature |
English PDF |
| GB/T 23806-2009 |
Fine ceramics (advanced ceramics,advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method 精细陶瓷断裂韧性试验方法 单边预裂纹梁(SEPB)法 |
China National Standards A method temperature |
English PDF |
| GB/T 23805-2009 |
Fine ceramics(advanced ceramics,advanced technical ceramics) - Test method for tensile strength of monolithic ceramics at room temperature 精细陶瓷室温拉伸强度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 16534-2009 |
Fine ceramics（advanced ceramics,advanced technical ceramics）- Test method for hardness of monolithic ceramics at room temperature 精细陶瓷室温硬度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 23711.3-2009 |
High temperature test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐高温试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 23711.2-2009 |
Low temperature test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐低温试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 23605-2009 |
Method for β transus temperature determination of titanium alloys 钛合金β转变温度测定方法 |
China National Standards A method temperature |
English PDF |
| GB/T 4074.8-2009 |
Winding wires - Test methods - Part 8: Test procedure for the determination of the temperature index of enamelled winding wires - Quick-Test method 绕组线试验方法 第8部分：测定漆包绕组线温度指数的试验方法 快速法 |
China National Standards A method temperature |
English PDF |
| GB/T 4074.7-2009 |
Winding wires - Test methods - Part 7: Test procedure for the determination of the temperature index of enamelled winding wires 绕组线试验方法 第7部分：测定漆包绕组线温度指数的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 2423.59-2008 |
Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature(cold and heat)/low air pressure/vibration（random） 电工电子产品环境试验 第2部分：试验方法 试验Z/ABMFh：温度（低温、高温）/低气压/振动（随机）综合 |
China National Standards A method temperature |
English PDF |
| GB/T 22567-2008 |
Electrical insulating materials - Methods of test for the determination of the glass transition temperature 电气绝缘材料 测定玻璃化转变温度的试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 22376.2-2008 |
Adhesives - Methods of preparing bulk specimens - Part 2: Elevated-temperature-curing one-part systems 胶粘剂 本体试样的制备方法 第2部分：热固化单组份体系 |
China National Standards A method temperature |
English PDF |
| GB/T 14390-2008 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at elevated temperature 精细陶瓷高温弯曲强度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 22307-2008 |
Standard test method for compressive strength of gaskets at elevated temperatures 密封垫片高温抗压强度试验方法 |
China National Standards A method temperature |
English PDF |
| GB/T 16582-2008 |
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods 塑料 用毛细管法和偏光显微镜法测定部分结晶聚合物熔融行为（熔融温度或熔融范围） |
China National Standards A method temperature |
English PDF |
| GB/T 9343-2008 |
Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature 塑料燃烧性能试验方法 闪燃温度和自燃温度的测定 |
China National Standards A method temperature |
English PDF |
| GB/T 22052-2008 |
Test method for vapor pressure - Temperature relationship and initial decompostition temperature of liquids by isoteniscope 用液体蒸气压力计测定液体的蒸气压力 温度关系和初始分解温度的方法 |
China National Standards A method temperature |
English PDF |
| GB/T 2951.51-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 51:Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive component 电缆和光缆绝缘和护套材料通用试验方法 第51部分：填充膏专用试验方法 滴点 油分离 低温脆性 总酸值 腐蚀性 23℃时的介电常数 23℃和100℃时的直流电阻率 |
China National Standards A method temperature |
English PDF |
| GB/T 2951.42-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrappi 电缆和光缆绝缘和护套材料通用试验方法 第42部分：聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增 |
China National Standards A method temperature |
English PDF |
| GB/T 2951.31-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking 电缆和光缆绝缘和护套材料通用试验方法 第31部分：聚氯乙烯混合料专用试验方法 高温压力试验-抗开裂试验 |
China National Standards A method temperature |
English PDF |
| GB/T 2951.14-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 14:Methods for general application - Test at low temperature 电缆和光缆绝缘和护套材料通用试验方法 第14部分：通用试验方法 低温试验 |
China National Standards A method temperature |
English PDF |
| GB/T 17357-2008 |
In-situ measurements of heat loss through thermal insulation of equipments and pipes - Heat flow meter apparatus and surface temperature method 设备及管道绝热层表面热损失现场测定 热流计法和表面温度法 |
China National Standards A method temperature |
English PDF |
| GB/T 3903.18-2008 |
Footwear - Test methods for uppers - High temperature behaviour 鞋类 帮面试验方法 高温性能 |
China National Standards A method temperature |
English PDF |
| GB/T 5170.2-2008 |
Inspection methods for environmental testing equipments for electric and electronic products - Temperature testing equipments 电工电子产品环境试验设备检验方法 温度试验设备 |
China National Standards A method temperature |
English PDF |
| GB/T 5170.10-2008 |
Inspection methods for environmental testing equipments for electric and electronic products - Combined high and low temperature/low air pressure testing equipments 电工电子产品环境试验设备检验方法 高低温低气压试验设备 |
China National Standards A method temperature |
English PDF |
| GB/T 3651-2008 |
Measuring method for thermal conductivity of metal at high temperature 金属高温导热系数测量方法 |
China National Standards A method temperature |
English PDF |
| GB/T 5989-2008 |
Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature 耐火材料 荷重软化温度试验方法 示差升温法 |
China National Standards A method temperature |
English PDF |
| GB/T 2423.102-2008 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test: combined temperature(cold and heat)/low air pressure/vibration（sinusoidal） 电工电子产品环境试验 第2部分：试验方法 试验：温度（低温、高温）/低气压/振动（正弦）综合 |
China National Standards A method temperature |
English PDF |
| GB/T 9291-2008 |
Surface active agents - Method of testing of the restraining effect of levelling agents for disperse dyes on dyeing polyester textile under high temperature conditions 表面活性剂 高温条件下分散染料染聚酯织物时匀染剂的抑染作用测试法 |
China National Standards A method temperature |
English PDF |
| Find out:252Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
