Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43266-2023 |
Measurement method of magnetic declination Angle of permanent magnets {译} 永磁体磁偏角的测量方法 |
China National Standards Angle |
 English PDF |
| GB/T 42694-2023 |
Textiles - Testing and evaluation of surface wetting resistance - Contact Angle and rolling angle method {译} 纺织品 表面抗润湿性能的检测和评价 接触角和滚动角法 |
China National Standards Angle |
English PDF |
| GB/T 4096.1-2022 |
Product Geometric Specifications (GPS) Wedges Part 1: Angle and Slope Series {译} 产品几何技术规范（GPS） 楔体 第1部分：角度与斜度系列 |
China National Standards Angle |
English PDF |
| GB/T 38940-2020 |
Non-destructive testing—Testing method of small-Angle neutron scattering 无损检测 中子小角散射检测方法 |
China National Standards Angle |
English PDF |
| GB/T 37476-2019 |
Marine swing and rotate Angle hydraulic cylinder 船用摆动转角液压缸 |
China National Standards Angle |
English PDF |
| GB/T 35030-2018 |
Determination methods for launching height,launching deflection Angle and radiation radius of fireworks 烟花发射高度、发射偏斜角、辐射半径测定方法 |
China National Standards Angle |
English PDF |
| GB/T 26548.1-2018 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 1:Angle and vertical grinders 手持便携式动力工具 振动试验方法 第1部分：角式和端面式砂轮机 |
China National Standards Angle |
English PDF |
| GB/T 36086-2018 |
Nanotechnology—Determination of contact Angles of nanopowders—Washburn dynamic pressure method 纳米技术 纳米粉体接触角测量 Washburn动态压力法 |
China National Standards Angle |
English PDF |
| GB/T 34831-2017 |
Nanotechnologies—Electron microscopy imaging of noble metal nanoparticles—High Angle annular dark field imaging method 纳米技术 贵金属纳米颗粒电子显微镜成像 高角环形暗场法 |
China National Standards Angle |
English PDF |
| GB/T 34592-2017 |
Steering force steering Angle detector for steering wheel of automobile 汽车转向盘转向力-转向角检测仪 |
China National Standards Angle |
English PDF |
| GB/T 34184-2017 |
Test method for infrared refractive index of infrared optical glass—The deflection Angle measurement 红外光学玻璃红外折射率测试方法 偏折角法 |
China National Standards Angle |
English PDF |
| GB/T 32526-2016 |
General specification for the equipment of passing azimuth Angle vertically 方位垂直传递装置通用规范 |
China National Standards Angle |
English PDF |
| GB/T 11297.9-2015 |
Test method for dielectric tangent of loss Angle of pyroelectric materials 热释电材料介质损耗角正切tanδ的测试方法 |
China National Standards Angle |
English PDF |
| GB/T 5594.4-2015 |
Test methods for properties of structure ceramic used in electronic components and device—Part 4: Test method for permittivity and dielectric loss Angle tangent value 电子元器件结构陶瓷材料性能测试方法 第4部分：介电常数和介质损耗角正切值的测试方法 |
China National Standards Angle |
English PDF |
| GB/T 30693-2014 |
Measurement of water-contact Angle of plastic films 塑料薄膜与水接触角的测量 |
China National Standards Angle |
English PDF |
| GB/T 19658-2013 |
Method of measurement of center beam intensity and beam Angle(s)of reflector lamps 反射灯中心光强和光束角的测量方法 |
China National Standards Angle |
English PDF |
| GB/T 30447-2013 |
Measurement method for contact Angle of nano-film surface 纳米薄膜接触角测量方法 |
China National Standards Angle |
English PDF |
| GB/T 12164.3-2013 |
Reference beta radiations - Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and Angle of incidence β参考辐射 第3部分：场所和个人剂量仪的校准及其能量响应和角响应的确定 |
China National Standards Angle |
English PDF |
| GB/T 29537-2013 |
Pipe threads with 80 degree thread Angle where pressure-tight joints are not made on the threads 80°非密封管螺纹 |
China National Standards Angle |
English PDF |
| GB/T 13915-2013 |
Tolerance of Angles for stamping parts 冲压件角度公差 |
China National Standards Angle |
English PDF |
| GB/T 29485-2013 |
Ship and marine technology - Electric rudder Angle indicators 船舶和海上技术 电气舵角指示器 |
China National Standards Angle |
English PDF |
| GB/T 12311-2012 |
Sensory analysis method - TriAngle test 感官分析方法 三点检验 |
China National Standards Angle |
English PDF |
| GB/T 27944-2011 |
Dryseal pipe threads with the thread Angle of 60 degrees 60°干密封管螺纹 |
China National Standards Angle |
English PDF |
| GB/T 12716-2011 |
Pipe threads with the thread Angle of 60 degrees where pressure-tight joints are made on threads 60°密封管螺纹 |
China National Standards Angle |
English PDF |
| GB/T 13739-2011 |
Test methods for laser beam widths,divergence Angle and transverse mode 激光光束宽度、发散角的测试方法以及横模的鉴别方法 |
China National Standards Angle |
English PDF |
| GB/T 26599.1-2011 |
Lasers and laser-related equipment - Test methods for laser beam widths, divergence Angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beam 激光和激光相关设备 激光光束宽度、发散角和光束传输比的试验方法 第1部分：无像散和简单像散光束 |
China National Standards Angle |
English PDF |
| GB/T 26080-2010 |
Roll-forming rectAngle steel tube for tower crane 塔机用冷弯矩形管 |
China National Standards Angle |
English PDF |
| GB/T 25754-2010 |
Vacuum technology - Right-Angle valve - Dimensions and interfaces for pneumatic actuator 真空技术 直角阀 尺寸和气动装置的接口 |
China National Standards Angle |
English PDF |
| GB/T 25378-2010 |
Collets with 8°setting Angle for tool shanks - Collets，nuts and fitting dimensions 工具柄用8°安装锥的弹簧夹头 弹簧夹头、螺母和配合尺寸 |
China National Standards Angle |
English PDF |
| GB/T 25256-2010 |
Optical functional films - Release film - The measurement of peeling force at 180°Angle and subsequent adhesion 光学功能薄膜 离型膜 180°剥离力和残余黏着率测试方法 |
China National Standards Angle |
English PDF |
| GB/T 24553-2009 |
Motorcycles and mopeds-limitative device to steering and maximum wheel steer Angle-requirements and measurement methods 摩托车和轻便摩托车转向轮限位装置及最大转向角的技术要求和测定方法 |
China National Standards Angle |
English PDF |
| GB/T 24368-2009 |
Test method for hydrophobic contamination on glass by contact Angle measurement 玻璃表面疏水污染物检测 接触角测量法 |
China National Standards Angle |
English PDF |
| GB/T 6609.31-2009 |
Chemical analysis methods and determination of physical performance of alumina - Part 31: Determination of Angle of flow 氧化铝化学分析方法和物理性能测定方法 第31部分：流动角的测定 |
China National Standards Angle |
English PDF |
| GB/T 23481-2009 |
CNC Punching,marking & cutting line for Angles 数控角钢加工生产线 |
China National Standards Angle |
English PDF |
| GB/T 22521-2008 |
Angle block gauge 角度量块 |
China National Standards Angle |
English PDF |
| GB/T 3478.8-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 8: 45°pressure Angle M and W values 圆柱直齿渐开线花键 （米制模数 齿侧配合） 第8部分：45°压力角 M值和W值 |
China National Standards Angle |
English PDF |
| GB/T 3478.7-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 7: 37.5°pressure Angle M and W values 圆柱直齿渐开线花键 （米制模数 齿侧配合) 第7部分：37.5°压力角M值和W值 |
China National Standards Angle |
English PDF |
| GB/T 3478.6-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 6: 30°pressure Angle M and W values 圆柱直齿渐开线花键（米制模数 齿侧配合） 第6部分：30°压力角M值和W值 |
China National Standards Angle |
English PDF |
| GB/T 3478.4-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 4: 45°pressure Angle dimensions tables 圆柱直齿渐开线花键 （米制模数 齿侧配合） 第4部分：45°压力角尺寸表 |
China National Standards Angle |
English PDF |
| GB/T 3478.3-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 3: 37.5°pressure Angle dimensions tables 圆柱直齿渐开线花键（米制模数 齿侧配合） 第3部分：37.5°压力角尺寸表 |
China National Standards Angle |
English PDF |
| GB/T 3478.2-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 2: 30°pressure Angle dimensions tables 圆柱直齿渐开线花键（米制模数 齿侧配合） 第2部分： 30°压力角尺寸表 |
China National Standards Angle |
English PDF |
| GB/T 13576.4-2008 |
Buttress threads with the flank Angles of 3 and 30 degrees - Part 4: Tolerances 锯齿形(3°、30°)螺纹 第4部分：公差 |
China National Standards Angle |
English PDF |
| GB/T 13576.3-2008 |
Buttress threads with the flank Angles of 3 and 30 degrees - Part 3: Basic dimensions 锯齿形(3°、30°)螺纹 第3部分：基本尺寸 |
China National Standards Angle |
English PDF |
| GB/T 13576.2-2008 |
Buttress threads with the flank Angles of 3 and 30 degrees - Part 2: General plan 锯齿形(3°、30°)螺纹 第2部分：直径与螺距系列 |
China National Standards Angle |
English PDF |
| GB/T 13576.1-2008 |
Buttress threads with the flank Angles of 3 and 30 degrees - Part 1: Profiles 锯齿形(3°、30°)螺纹 第1部分：牙型 |
China National Standards Angle |
English PDF |
| GB/T 22091.1-2008 |
Gauges for pipe threads with 55 degree thread Angle where pressure-tight joints are made on the threads - Part 1:Verification of parallel internal and taper external threads 55°密封管螺纹量规 第1部分：用于检验圆柱内螺纹与圆锥外螺纹 |
China National Standards Angle |
English PDF |
| GB/T 529-2008 |
Rubber,vulcanized or thermoplastic - Determination of tear strength（Trouser，Angle and crescent test pieces） 硫化橡胶或热塑性橡胶撕裂强度的测定（裤形、直角形和新月形试样） |
China National Standards Angle |
English PDF |
| GB/T 4127.14-2008 |
Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an Angle grinder 固结磨具 尺寸 第14部分：角向砂轮机用去毛刺、荒磨和粗磨砂轮 |
China National Standards Angle |
English PDF |
| GB/T 11343-2008 |
Non-destructive testing - Practice for ultrasonic Angle-beam testing by the contact method 无损检测 接触式超声斜射检测方法 |
China National Standards Angle |
English PDF |
| GB/T 3750-2008 |
24° cone connectors - Angle swivel screw connector 卡套式铰接管接头 |
China National Standards Angle |
English PDF |
| GB/T 18311.30-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish Angle and fibre position on single ferrule multifibre connectors 纤维光学互连器件和无源器件 基本试验和测量程序 第3-30部分：检查和测量 单套管多芯光纤连接器抛光角度和光纤位置 |
China National Standards Angle |
English PDF |
| GB/T 6129-2007 |
Technical specifications for Angle cutters 角度铣刀 技术条件 |
China National Standards Angle |
English PDF |
| GB/T 6128.2-2007 |
Angle milling cutter - Part 2: The double equal--angle cutters 角度铣刀 第2部分：对称双角铣刀 |
China National Standards Angle |
English PDF |
| GB/T 6128.1-2007 |
Angle milling cutter - Part 1: The single and double unequal-angle cutters 角度铣刀 第1部分：单角和不对称双角铣刀 |
China National Standards Angle |
English PDF |
| GB/T 7442-2007 |
Angle grinders 角向磨光机 |
China National Standards Angle |
English PDF |
| GB 20553-2006 |
TriAngle sail mussel 三角帆蚌 |
China National Standards Angle |
English PDF |
| GB/T 20503-2006 |
Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss at Angles of 20°,45°,60°or 85° 铝及铝合金阳极氧化 阳极氧化膜镜面反射率和镜面光泽度的测定 20°、45°、60°、85°角度方向 |
China National Standards Angle |
English PDF |
| GB/T 20064.2-2006 |
Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the Angle of disengagement 往复式内燃机 手柄起动装置 第2部分：脱开角试验方法 |
China National Standards Angle |
English PDF |
| GB/T 10922-2006 |
Gauges for pipe threads with 55 degree thread Angle where pressure-tight joints are not made on the threads 55°非密封管螺纹量规 |
China National Standards Angle |
English PDF |
| GB/T 20035.5-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part 5: Dimensions,tolerances and designation of cones with half Angle 5°57′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第5部分：半锥角5°57′圆锥形筒管的尺寸、公差和标记 |
China National Standards Angle |
English PDF |
| GB/T 20035.4-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part 4: Dimensions,tolerances and designation of cones with half Angle 4°20′for winding for dyeing purposes 纺织机械与附件 交叉卷绕用圆锥形筒管 第4部分：半锥角4°20′染色用圆锥形筒管的尺寸、公差和标记 |
China National Standards Angle |
English PDF |
| GB/T 20035.3-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part 3: Dimensions,tolerances and designation of cones with half Angle 4°20′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第3部分：半锥角4°20′圆锥形筒管的尺寸、公差和标记 |
China National Standards Angle |
English PDF |
| GB/T 20035.2-2005 |
Textile machinery and accessories -- Cones for cross winding -- Part2: Dimensions,tolerances and designation of cones with half Angle 3°30′ 纺织机械与附件 交叉卷绕用圆锥形筒管 第2部分：半锥角3°30′圆锥形筒管的尺寸、公差和标记 |
China National Standards Angle |
English PDF |
| GB/T 17213.3-2005 |
Industrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,Angle pattern control valves 工业过程控制阀 第3-1部分：尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距 |
China National Standards Angle |
English PDF |
| GB/T 19804-2005 |
Welding-General tolerances for welded constructions-Dimensions for lengths and Angles-Shape and position 焊接结构的一般尺寸公差和形位公差 |
China National Standards Angle |
English PDF |
| GB/T 13221-2004 |
Nanometer powder--Determination of particle size distribution--Small Angle X-ray scattering method 纳米粉末粒度分布的测定 X射线小角散射法 |
China National Standards Angle |
English PDF |
| GB/T 4258-2004 |
Parallel shanks countersinks for Angles60°、90°and 120° inclusive 60°、90°、120°直柄锥面锪钻 |
China National Standards Angle |
English PDF |
| GB/T 1143-2004 |
Morse taper shank countersinks for Angles 60° and 90°，120° inclusive 60°、90°、120°莫氏锥柄锥面锪钻 |
China National Standards Angle |
English PDF |
| GB/T 6609.24-2004 |
Chemical analysis methods and determination of physical performance of alumina--Measurement of the Angle of repose 氧化铝化学分析方法和物理性能测定方法 安息角的测定 |
China National Standards Angle |
English PDF |
| GB 19151-2003 |
Warning triAngles for motor vehicle 机动车用三角警告牌 |
China National Standards Angle |
English PDF |
| GB/T 18702-2002 |
Determination of Angle of repose of coal 煤炭安息角测定方法 |
China National Standards Angle |
English PDF |
| GB/T 4096-2001 |
Geometrical product specifications(GPS)--Series of Angler and slopes on prisms 产品几何量技术规范(GPS) 棱体的角度与斜度系列 |
China National Standards Angle |
English PDF |
| GB/T 157-2001 |
Geometrical product specifications(GPS)--Series of conical tapers and taper Angles 产品几何量技术规范(GPS) 圆锥的锥度与锥角系列 |
China National Standards Angle |
English PDF |
| GB/T 7307-2001 |
Pipe threads with 55 degree thread Angle where pressure-tight joints are not made on the threads 55°非密封管螺纹 |
China National Standards Angle |
English PDF |
| GB/T 7306.2-2000 |
Pipe threads with 55 degree thread Angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹 |
China National Standards Angle |
English PDF |
| GB/T 7306.1-2000 |
Pipe threads with 55 degree thread Angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads 55°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹 |
China National Standards Angle |
English PDF |
| GB/T 3819-1997 |
Textiles--Determination of the recovery from creasing of a folded specimen by measuring the Angle of recovery 纺织品 织物折痕回复性的测定 回复角法 |
China National Standards Angle |
English PDF |
| GB/T 16672-1996 |
Welds--Working positions--Definitionsof Angles of slope and rotation 焊缝 工作位置 倾角和转角的定义 |
China National Standards Angle |
English PDF |
| GB/T 14675-1993 |
Air quality--Determination of odor--TriAngle odor bag method 空气质量 恶臭的测定 三点比较式臭袋法 |
China National Standards Angle |
English PDF |
| GB/T 11986-1989 |
Surface active agents--Powders and Granules--Measurement of the Angle of repose 表面活性剂 粉体和颗粒休止角的测量 |
China National Standards Angle |
English PDF |
| GB/T 11297.9-1989 |
Test method for dielectric tangent of loss Angle of pyroelectric material 热释电材料介质损耗角正切 tan δ的测试方法 |
China National Standards Angle |
English PDF |
| GB/T 963-1988 |
Spacers for self-locking nuts，Angle，anchor 角形托板自锁螺母垫片 |
China National Standards Angle |
English PDF |
| GB/T 941-1988 |
Boots for self-locking nuts，Angle，anchor 角形托板自锁螺母保护罩 |
China National Standards Angle |
English PDF |
| GB/T 931-1988 |
Self-locking nuts，Angle，anchor 角形托板自锁螺母 |
China National Standards Angle |
English PDF |
| GB/T 6598-1986 |
Determination of weight-average molecular weight of polystyrene standards by low Angle laser light scattering method 小角激光光散射法测定聚苯乙烯标准样品的重均分子量 |
China National Standards Angle |
English PDF |
| Find out:85Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
