Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 17692-2024 |
Test methods for net power of Automobile engines and drive motors {译} 汽车发动机及驱动电机净功率测试方法 |
China National Standards Automobile |
 English PDF |
| GB/T 19055-2024 |
Automobile engine reliability test methods {译} 汽车发动机可靠性试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 44082-2024 |
Road vehicles - Connection devices between multiple vehicles of Automobile trains - Strength requirements {译} 道路车辆-汽车列车多车辆间连接装置-强度要求 |
China National Standards Automobile |
English PDF |
| GB/T 18297-2024 |
Automobile engine performance test methods {译} 汽车发动机性能试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 12674-2024 |
Measurement methods for mass parameters of Automobiles, trailers and automobile trains {译} 汽车、挂车及汽车列车质量参数测量方法 |
China National Standards Automobile |
English PDF |
| GB/T 44123-2024 |
Test methods for Automobile hydraulic brake systems {译} 汽车液压制动系统试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 19533-2024 |
Periodic inspection and evaluation of compressed natural gas cylinders for Automobiles {译} 汽车用压缩天然气钢瓶定期检验与评定 |
China National Standards Automobile |
English PDF |
| GB/T 29041-2023 |
Road wear test method for Automobile tires {译} 汽车轮胎道路磨耗试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 43250-2023 |
Active infrared detection system for Automobiles {译} 汽车用主动红外探测系统 |
China National Standards Automobile |
English PDF |
| GB/T 43249-2023 |
Passive infrared detection system for Automobiles {译} 汽车用被动红外探测系统 |
China National Standards Automobile |
English PDF |
| GB/T 17867-2023 |
Location of Automobile hand controls, indicators and signaling devices {译} 汽车手操纵件、指示器及信号装置的位置 |
China National Standards Automobile |
English PDF |
| GB/T 16739.2-2023 |
Business conditions for Automobile maintenance industry Part 2: Comprehensive minor repair and special maintenance of automobiles {译} 汽车维修业经营业务条件 第2部分：汽车综合小修及专项维修业户 |
China National Standards Automobile |
English PDF |
| GB/T 16739.1-2023 |
Business conditions for Automobile repair industry Part 1: Complete automobile repair enterprises {译} 汽车维修业经营业务条件 第1部分：汽车整车维修企业 |
China National Standards Automobile |
English PDF |
| GB/T 13552-2023 |
Automobile poly V-belt {译} 汽车多楔带 |
China National Standards Automobile |
English PDF |
| GB/T 20564.14-2023 |
High-strength cold-rolled steel plates and strips for Automobiles Part 14: Low-density steel {译} 汽车用高强度冷连轧钢板及钢带 第14部分：低密度钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.13-2023 |
High-strength cold-rolled steel plates and strips for Automobiles Part 13: Medium manganese steel {译} 汽车用高强度冷连轧钢板及钢带 第13部分：中锰钢 |
China National Standards Automobile |
English PDF |
| GB/T 12541-2023 |
Automobile Passability Test Method {译} 汽车通过性试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 14951-2023 |
Automobile fuel-saving technology evaluation method {译} 汽车节油技术评定方法 |
China National Standards Automobile |
English PDF |
| GB/T 26778-2023 |
Performance requirements and test methods for Automobiles and trains {译} 汽车列车性能要求及试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 17346-2023 |
Method for measuring the position and size of the pedals of Automobiles {译} 汽车脚踏板位置尺寸测量方法 |
China National Standards Automobile |
English PDF |
| GB/T 20564.6-2022 |
High-strength cold-rolled steel sheets and strips for Automobiles—Part 6: Transformation-induced plasticity steels {译} 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.5-2022 |
High-strength cold-rolled steel sheets and strips for Automobiles - Part 5: Isotropic steels {译} 汽车用高强度冷连轧钢板及钢带 第5部分：各向同性钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.4-2022 |
High-strength cold-rolled steel sheets and strips for Automobiles - Part 4: Low-alloy high-strength steels {译} 汽车用高强度冷连轧钢板及钢带 第4部分：低合金高强度钢 |
China National Standards Automobile |
English PDF |
| GB/T 24162-2022 |
Periodic inspection and evaluation of compressed natural gas metal liner fiber ring wound gas cylinders for Automobiles {译} 汽车用压缩天然气金属内胆纤维环缠绕气瓶定期检验与评定 |
China National Standards Automobile |
English PDF |
| GB/T 41600-2022 |
Test method for straight-line running stability of Automobiles {译} 汽车直线行驶稳定性试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 20887.5-2022 |
High strength hot rolled steel sheet and strip for Automobile part 5: martensitic steel {译} 汽车用高强度热连轧钢板及钢带 第5部分:马氏体钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.4-2022 |
High strength hot rolled steel sheet and strip for Automobile part 4: transformation induced plastic steel {译} 汽车用高强度热连轧钢板及钢带 第4部分:相变诱导塑性钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.3-2022 |
High strength hot rolled steel sheet and strip for Automobile part 3: dual phase steel {译} 汽车用高强度热连轧钢板及钢带 第3部分：双相钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.2-2022 |
High strength hot rolled steel sheet and strip for Automobile part 2: high reaming steel {译} 汽车用高强度热连轧钢板及钢带 第2部分：高扩孔钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.7-2022 |
High strength tandem cold rolled steel sheet and strip for Automobile part 7: martensitic steel {译} 汽车用高强度冷连轧钢板及钢带 第7部分：马氏体钢 |
China National Standards Automobile |
English PDF |
| GB/T 41484-2022 |
Ultrasonic sensor assembly for Automobile {译} 汽车用超声波传感器总成 |
China National Standards Automobile |
English PDF |
| GB/T 13564-2022 |
Roller opposite forces type Automobile brake tester 滚筒反力式汽车制动检验台 |
China National Standards Automobile |
English PDF |
| GB/T 12782-2022 |
Automobile heating performance requirements and test methods {译} 汽车采暖性能要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 41871-2022 |
Information Security Technology - Security Requirements for Automobile Data Processing {译} 信息安全技术 汽车数据处理安全要求 |
China National Standards Automobile |
English PDF |
| GB/T 17258-2022 |
Compressed Natural Gas Cylinders for Automobiles {译} 汽车用压缩天然气钢瓶 |
China National Standards Automobile |
English PDF |
| GB/T 19910-2022 |
Technical requirements for repairing electronic control system of Automobile engine {译} 汽车发动机电子控制系统修理技术要求 |
China National Standards Automobile |
English PDF |
| GB 40164-2021 |
Automobiles and trailer — Specifications and test methods of brake part 汽车和挂车 制动器用零部件技术要求及试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 40316-2021 |
Welded high strength shaped and round steel tubes for Automobile structure 汽车结构用高强度异型及圆形焊接钢管 |
China National Standards Automobile |
English PDF |
| GB 40164-2021 |
Automobiles and trailer - Specifications and test methods of brake part 汽车和挂车 制动器用零部件技术要求及试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 39870-2021 |
Brand valuation—Automobile manufacturing industry 品牌价值评价 汽车制造业 |
China National Standards Automobile |
English PDF |
| GB/T 41158-2021 |
Management requirements for circulation information of Automobile aftermarket parts 汽车后市场配件流通信息管理要求 |
China National Standards Automobile |
English PDF |
| GB/T 29632-2021 |
Range of main parts and the guarantees certificate in repair,replacement and return warranty of household Automobile 家用汽车产品三包主要零部件种类范围及三包凭证 |
China National Standards Automobile |
English PDF |
| GB/T 40726-2021 |
Rubber-or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of Automobiles 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定 |
China National Standards Automobile |
English PDF |
| GB/T 38796-2020 |
Performance requirements and test methods of Automobile blow-out emergency safety device 汽车爆胎应急安全装置性能要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 26036-2020 |
Aluminum alloy die forgings for Automobile wheels 汽车轮毂用铝合金模锻件 |
China National Standards Automobile |
English PDF |
| GB/T 38933-2020 |
Cold rolled steel sheet for Automobile—Test method of phosphate conversion coatings 汽车用冷轧钢板 磷酸盐转化膜试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 24595-2020 |
Hot-rolled steel bars for quenched and tempered Automobile crankshafts 汽车调质曲轴用热轧钢棒 |
China National Standards Automobile |
English PDF |
| GB/T 39491-2020 |
General technical requirements of carbon fiber composites covering parts for Automobiles 汽车用碳纤维复合材料覆盖部件通用技术要求 |
China National Standards Automobile |
English PDF |
| GB 18296-2019 |
Safety property requirements and test methods for Automobile fuel tank and its installation 汽车燃油箱及其安装的安全性能要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB 15083-2019 |
Strength requirement and test method of Automobile seats,their anchorages and any head restraints 汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB 15083-2019 |
Strength requirement and test method of Automobile seats,their anchorages and any head restraints 汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 37930-2019 |
Non-destructive testing instruments—Technical specifications of X-ray real-time imaging system for Automobile wheel 无损检测仪器 汽车轮毂X射线实时成像检测仪技术要求 |
China National Standards Automobile |
English PDF |
| GB/T 37427-2019 |
Plastics—Acrylonitrile-butadiene-styrene(ABS) compound for Automobile 塑料 汽车用丙烯腈-丁二烯-苯乙烯(ABS)专用料 |
China National Standards Automobile |
English PDF |
| GB/T 20564.12-2019 |
Continuously cold rolled high strength steel sheet and strip for Automobile—Part 12:Dual phase steel with high formability 汽车用高强度冷连轧钢板及钢带 第12部分：增强成形性双相钢 |
China National Standards Automobile |
English PDF |
| GB/T 37474-2019 |
Methods and requirements of airbag system abuse test for Automobile 汽车安全气囊系统误作用试验的方法和要求 |
China National Standards Automobile |
English PDF |
| GB/T 37336-2019 |
Brake drum for Automobile 汽车制动鼓 |
China National Standards Automobile |
English PDF |
| GB/T 36986-2018 |
Dynamic testing methods of brake performance for Automobiles 汽车制动性能动态检测方法 |
China National Standards Automobile |
English PDF |
| GB/T 36987-2018 |
Testing methods of anti lock braking system(ABS) performance for Automobiles 汽车防抱制动系统(ABS)性能检测方法 |
China National Standards Automobile |
English PDF |
| GB/T 37269-2018 |
Brake pad assemblly for Automobile 汽车用盘式制动衬块总成 |
China National Standards Automobile |
English PDF |
| GB/T 37224-2018 |
Drum brake linings for Automobile 汽车用鼓式制动片 |
China National Standards Automobile |
English PDF |
| GB/T 37259-2018 |
Test method for aging Automobile tyres 汽车轮胎老化试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 22038-2018 |
Method of Automobile tyre static contact pressure distribution 汽车轮胎静态接地压力分布试验方法 |
China National Standards Automobile |
English PDF |
| GB 19147-2016/XG1-2018 |
Automobile diesel fuels 《车用柴油》国家标准第1号修改单 |
China National Standards Automobile |
English PDF |
| GB 5763-2018 |
Brake linings for Automobiles 汽车用制动器衬片 |
China National Standards Automobile |
English PDF |
| GB/T 21360-2018 |
Refrigerant compressor for Automobile air conditioning 汽车空调用制冷剂压缩机 |
China National Standards Automobile |
English PDF |
| GB/T 22068-2018 |
Electrically driven compressor assembly for Automobile air conditioning 汽车空调用电动压缩机总成 |
China National Standards Automobile |
English PDF |
| GB 13895-2018 |
Heavy duty gear oils for Automobile (GL-5) 重负荷车辆齿轮油(GL-5) |
China National Standards Automobile |
English PDF |
| GB/T 36683-2018 |
Specification for assessment of Automobile after-sales service 汽车售后服务评价规范 |
China National Standards Automobile |
English PDF |
| GB/T 36686-2018 |
Specification for Automobile after-sales services 汽车售后服务规范 |
China National Standards Automobile |
English PDF |
| GB/T 36684-2018 |
Service specification for Automobile afer-sales spare and accessory parts market 汽车售后零配件市场服务规范 |
China National Standards Automobile |
English PDF |
| GB 36581-2018 |
Safety performance requirements and test methods of Automobile wheels 汽车车轮安全性能要求及试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 36765-2018 |
1,1,1,2-Tetrafluoroethane for Automobile air-conditioning use（aerosol product） 汽车空调用1,1,1,2-四氟乙烷（气雾罐型） |
China National Standards Automobile |
English PDF |
| GB/T 24149.2-2017 |
Plastics―Polypropylene(PP) compound for Automobile―Part 2: Instrument panel 塑料 汽车用聚丙烯（PP）专用料 第2部分：仪表板 |
China National Standards Automobile |
English PDF |
| GB/T 24149.3-2017 |
Plastics―Polypropylene(PP) compound for Automobile―Part 3: Door panel 塑料 汽车用聚丙烯（PP）专用料 第3部分：门内板 |
China National Standards Automobile |
English PDF |
| GB/T 34566-2017 |
Hot stamping steel sheet and strip for Automobile 汽车用热冲压钢板及钢带 |
China National Standards Automobile |
English PDF |
| GB/T 34422-2017 |
Brake disc for Automobile 汽车用制动盘 |
China National Standards Automobile |
English PDF |
| GB/T 34592-2017 |
Steering force steering angle detector for steering wheel of Automobile 汽车转向盘转向力-转向角检测仪 |
China National Standards Automobile |
English PDF |
| GB/T 20564.1-2017 |
Continuously cold rolled high strength steel sheet and strip for Automobile—Part 1: Bake hardening steel 汽车用高强度冷连轧钢板及钢带 第1部分：烘烤硬化钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.3-2017 |
Continuously cold rolled high strength steel sheet and strip for Automobile—Part 3: High strength interstitial free steel 汽车用高强度冷连轧钢板及钢带 第3部分: 高强度无间隙原子钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.7-2017 |
Continuously hot rolled high strength steel sheet and strip for Automobile—Part 7：Steels for hydraulic forming 汽车用高强度热连轧钢板及钢带 第7部分：液压成形用钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.11-2017 |
Continuously cold rolled high strength steel sheet and strip for Automobile—Part 11：Carbon manganese steel 汽车用高强度冷连轧钢板及钢带 第11部分：碳锰钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.2-2017 |
Continuously cold rolled high strength steel sheet and strip for Automobile—Part 2: Dual phase steel 汽车用高强度冷连轧钢板及钢带 第2部分：双相钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.6-2017 |
Continuously hot rolled high strength steel sheet and strip for Automobile—Part 6: Complex phase steel 汽车用高强度热连轧钢板及钢带 第6部分：复相钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.10-2017 |
Continuously cold rolled high strength steel sheet and strip for Automobile—Part 10: Twinning induced plasticity steel 汽车用高强度冷连轧钢板及钢带 第10部分：孪晶诱导塑性钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.1-2017 |
Continuously hot rolled high strength steel sheet and strip for Automobile—Part 1: High yield strength steel for cold forming 汽车用高强度热连轧钢板及钢带 第1部分：冷成形用高屈服强度钢 |
China National Standards Automobile |
English PDF |
| GB/T 34020.2-2017 |
Double wall copper-brazed steel tubes—Part 2:Tubing system for Automobiles 双层卷焊钢管 第2部分：汽车管路系统用管 |
China National Standards Automobile |
English PDF |
| GB/T 33821-2017 |
Seamless steel tubes for Automobile stabilizer bar 汽车稳定杆用无缝钢管 |
China National Standards Automobile |
English PDF |
| GB/T 35789.1-2017 |
General specification for the electronic identification of motor vehicles—Part 1: Automobile 机动车电子标识通用规范 第1部分：汽车 |
China National Standards Automobile |
English PDF |
| GB/T 35790.1-2017 |
Specification for installation of the electronic identification of motor vehicles—Part 1:Automobile 机动车电子标识安装规范 第1部分：汽车 |
China National Standards Automobile |
English PDF |
| GB 16487.13-2017 |
Environmental protection control standard for imported solid wastes as raw materials—compressed piece of scrap Automobile 进口可用作原料的固体废物环境保护控制标准—废汽车压件 |
China National Standards Automobile |
English PDF |
| GB 19147-2016 |
Automobile diesel fuels 车用柴油 |
China National Standards Automobile |
English PDF |
| GB/T 33245-2016 |
Information description of product for electronic commerce transaction—Automobile parts 电子商务交易产品信息描述 汽车配件 |
China National Standards Automobile |
English PDF |
| GB/T 33166-2016 |
Hot-rolled steel plate,sheet and strip for Automobile axle housings 汽车桥壳用热轧钢板和钢带 |
China National Standards Automobile |
English PDF |
| GB/T 20564.9-2016 |
Continuously cold rolled high strength steel sheet and strip for Automobile—Part 9: Quenching and partitioning steel 汽车用高强度冷连轧钢板及钢带 第9部分：淬火配分钢 |
China National Standards Automobile |
English PDF |
| GB/T 33161-2016 |
Carburizing steels for Automobile bearings 汽车轴承用渗碳钢 |
China National Standards Automobile |
English PDF |
| GB/T 32691-2016 |
Automobile A/C electromagnetic clutch 汽车空调电磁离合器 |
China National Standards Automobile |
English PDF |
| GB/T 20564.8-2015 |
Continuously cold rolled high strength steel sheet and strip for Automobile—Part 8: Complex phase steel 汽车用高强度冷连轧钢板及钢带 第8部分：复相钢 |
China National Standards Automobile |
English PDF |
| GB 32086-2015 |
Requirement of vertical flammability characteristic and test method for certain category Automobile interior material 特定种类汽车内饰材料垂直燃烧特性技术要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 32085.2-2015 |
Automobiles—Cabin air filter—Part 2: Test for gas filtration 汽车 空调滤清器 第2部分：气体过滤测试 |
China National Standards Automobile |
English PDF |
| GB/T 32085.1-2015 |
Automobiles—Cabin air filter—Part 1: Test for particulate filtration 汽车 空调滤清器 第1部分：粉尘过滤测试 |
China National Standards Automobile |
English PDF |
| GB/T 3273-2015 |
Hot-rolled steel plates and strips for Automobile frames 汽车大梁用热轧钢板和钢带 |
China National Standards Automobile |
English PDF |
| GB/T 32011-2015 |
Textile trim materials in the interior of Automobiles—Test method for seam fatigue 汽车内饰用纺织材料 接缝疲劳试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 31970-2015 |
Performance requirements and bench test methods for air brake caliper assemble of Automobile 汽车用气压制动卡钳总成性能要求及台架试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 30912-2014 |
Rubber seals for Automobile hydraulic disc brake cylinders 汽车液压盘式制动缸用橡胶密封件 |
China National Standards Automobile |
English PDF |
| GB/T 5671-2014 |
General purpose lithium lubricating grease for Automobile 汽车通用锂基润滑脂 |
China National Standards Automobile |
English PDF |
| GB/T 30512-2014 |
Requirements for prohibited substances on Automobiles 汽车禁用物质要求 |
China National Standards Automobile |
English PDF |
| GB/T 29615-2013 |
Elastomeric boots used in Automobile hydraulic braking systems 汽车液压制动系统用橡胶护罩 |
China National Standards Automobile |
English PDF |
| GB/T 29632-2013 |
The range of main parts and the guarantees certificate in repair replacement and return warranty of Automobile 家用汽车产品三包主要零件种类范围与三包凭证 |
China National Standards Automobile |
English PDF |
| GB 19147-2013 |
Automobile diesel fuels 车用柴油(V) |
China National Standards Automobile |
English PDF |
| GB/T 17469-2012 |
Characteristics evaluation of brake linings for Automobile - Small sample bench test method 汽车制动器衬片摩擦性能评价 小样台架试验方法 |
China National Standards Automobile |
English PDF |
| GB 18075.1-2012 |
Health protection zone for manufacturing industry of transportation facilities - Part 1：Automobile industry 交通运输设备制造业卫生防护距离 第1部分：汽车制造业 |
China National Standards Automobile |
English PDF |
| GB 27695-2011 |
Safety rules for Automobile lift 汽车举升机安全规程 |
China National Standards Automobile |
English PDF |
| GB/T 26989-2011 |
Automobile recovery - Terminology 汽车回收利用 术语 |
China National Standards Automobile |
English PDF |
| GB/T 26988-2011 |
Marks for recoverability of Automobile parts 汽车部件可回收利用性标识 |
China National Standards Automobile |
English PDF |
| GB 26753-2011 |
Rubber diaphragms for brake chamber in Automobile 汽车制动气室橡胶隔膜 |
China National Standards Automobile |
English PDF |
| GB/T 26654-2011 |
Casting magnesium alloys for Automobile wheels 汽车车轮用铸造镁合金 |
China National Standards Automobile |
English PDF |
| GB/T 26649-2011 |
Magnesium alloy castings for Automobile wheels 镁合金汽车车轮铸件 |
China National Standards Automobile |
English PDF |
| GB/T 25984.1-2010 |
Automobiles electric fuel pump - Part 1: Brush’s electric fuel pump 汽车电动燃油泵 第1部分：有刷电动燃油泵 |
China National Standards Automobile |
English PDF |
| GB/T 25765-2010 |
Rolling bearings - Ball bearings for Automobile transmission 滚动轴承 汽车变速箱用球轴承 |
China National Standards Automobile |
English PDF |
| GB/T 25764-2010 |
Rolling bearings - Roller bearings for Automobile transmission 滚动轴承 汽车变速箱用滚子轴承 |
China National Standards Automobile |
English PDF |
| GB/T 25300-2010 |
Resistance welding equipment - Particular specfications applicable to transformers with one secondary winding for multi-spot welding, as used in the Automobile industry 电阻焊设备 汽车工业中使用的具有一个次级线圈的多点焊变压器特殊技术条件 |
China National Standards Automobile |
English PDF |
| GB/T 25299-2010 |
Resistance welding equipment - Particular specfications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the Automobile industry 电阻焊设备 汽车工业中使用的具有两个独立次级线圈的多点焊变压器特殊技术条件 |
China National Standards Automobile |
English PDF |
| GB/T 25348-2010 |
Technical specification of fuel saving products for Automobiles 汽车节油产品使用技术条件 |
China National Standards Automobile |
English PDF |
| GB/T 50610-2010 |
Code for design of Automobile ethanol gasoline storage and transportation 车用乙醇汽油储运设计规范 |
China National Standards Automobile |
English PDF |
| GB/T 20887.5-2010 |
Continuously hot rolled high strength steel sheet and strip for Automobile - Part 5: Martensitic steel 汽车用高强度热连轧钢板及钢带 第5部分：马氏体钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.4-2010 |
Continuously hot rolled high strength steel sheet and strip for Automobile - Part 4: Transformation induced plasticity steel 汽车用高强度热连轧钢板及钢带 第4部分：相变诱导塑性钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.3-2010 |
Continuously hot rolled high strength steel sheet and strip for Automobile - Part 3: Dual phase steel 汽车用高强度热连轧钢板及钢带 第3部分：双相钢 |
China National Standards Automobile |
English PDF |
| GB/T 20887.2-2010 |
Continuously hot rolled high strength steel sheet and strip for Automobile － Part 2: High hole expansion steel 汽车用高强度热连轧钢板及钢带 第2部分：高扩孔钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.7-2010 |
Continuously cold rolled high strength steel sheet and strip for Automobile - Part 7: Martensitic steels 汽车用高强度冷连轧钢板及钢带 第7部分：马氏体钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.6-2010 |
Continuously cold rolled high strength steel sheet and strip for Automobile - Part 6: Transformation induced plasticity steel 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.5-2010 |
Continuously cold rolled high strength steel sheet and strip for Automobile - Part 5: Isotropic steel 汽车用高强度冷连轧钢板及钢带 第5部分：各向同性钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.4-2010 |
Continuously cold rolled high strength steel sheet and strip for Automobile - Part 4: High strength low alloy steel 汽车用高强度冷连轧钢板及钢带 第4部分：低合金高强度钢 |
China National Standards Automobile |
English PDF |
| GB 11550-2009 |
Strength requirement and test of Automobile seats head restraints 汽车座椅头枕强度要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB 24409-2009 |
Limit of harmful substances of Automobile coatings 汽车涂料中有害物质限量 |
China National Standards Automobile |
English PDF |
| GB/T 24149.1-2009 |
Plastics - Polypropylene(PP) compound for Automobile - Part 1: Bumper 塑料 汽车用聚丙烯（PP）专用料 第1部分：保险杠 |
China National Standards Automobile |
English PDF |
| GB/T 23664-2009 |
Test method of non-destructive inspection for Automobile tyres - X-ray method 汽车轮胎无损检验方法 X射线法 |
China National Standards Automobile |
English PDF |
| GB/T 23663-2009 |
Test method of Automobile tyre longitudinal and lateral stiffness 汽车轮胎纵向和横向刚性试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 23437-2009 |
Polish for Automobiles 汽车上光蜡 |
China National Standards Automobile |
English PDF |
| GB/T 23435-2009 |
Cleaning fluids for electronic fuel injection Automobile nozzle 电喷汽车喷油嘴清洗液 |
China National Standards Automobile |
English PDF |
| GB/T 18437.2-2009 |
The technical criterion of refitting for vehicle by using gas - Part 2: Liquid petrol gas Automobile 燃气汽车改装技术要求 第2部分：液化石油气汽车 |
China National Standards Automobile |
English PDF |
| GB/T 18437.1-2009 |
The technical criterion of refitting for vehicle by using gas - Part 1: Compressed natural gas Automobile 燃气汽车改装技术要求 第1部分：压缩天然气汽车 |
China National Standards Automobile |
English PDF |
| GB/T 23301-2009 |
Casting aluminum alloy for Automobile wheels 汽车车轮用铸造铝合金 |
China National Standards Automobile |
English PDF |
| GB/T 23277-2009 |
Chemical analysis methods of catalysts containing precious metals - Determination of platinum, palladium and rhodium in Automobile exhaust-purifying catalysts - Spectrophotometry 贵金属催化剂化学分析方法 汽车尾气净化催化剂中铂、钯、铑量的测定 分光光度法 |
China National Standards Automobile |
English PDF |
| GB/T 12545.1-2008 |
Measurement methods of fuel consumption for Automobiles - Part 1: Measurement methods of fuel consumption for passenger cars 汽车燃料消耗量试验方法 第1部分：乘用车燃料消耗量试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 5335-2008 |
Automobile pressure test connection for hydraulic braking equipment 汽车液压制动装置压力测试连接器技术要求 |
China National Standards Automobile |
English PDF |
| GB 5763-2008 |
Brake linings for Automobiles 汽车用制动器衬片 |
China National Standards Automobile |
English PDF |
| GB/T 22068-2008 |
Automobile air conditioning electrically driven compressor assembly 汽车空调用电动压缩机总成 |
China National Standards Automobile |
English PDF |
| GB/T 22125-2008 |
The operation and management regulations for the enterprises of marketing Automobile parts 汽车配件营销企业经营管理规范 |
China National Standards Automobile |
English PDF |
| GB/T 22038-2008 |
Method of Automobile tyre static contact pressure distribution 汽车轮胎静态接地压力分布试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 21282-2007 |
Rubber/Plastics weatherstrip for Automobile 乘用车用橡塑密封条 |
China National Standards Automobile |
English PDF |
| GB/T 13563-2007 |
Roller Automobile speedometer tester 滚筒式汽车车速表检验台 |
China National Standards Automobile |
English PDF |
| GB/T 20887.1-2007 |
Continuously hot rolled high strength steel sheet and strip for Automobile - Part 1: High yield strength steel for cold forming 汽车用高强度热连轧钢板及钢带 第1部分：冷成形用高屈服强度钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.3-2007 |
Continuously cold rolled high strength steel sheet and strip for Automobile - Part 3: High strength interstitial free steel 汽车用高强度冷连轧钢板及钢带 第3部分：高强度无间隙原子钢 |
China National Standards Automobile |
English PDF |
| GB/T 20564.1-2007 |
Continuously cold rolled high strength steel sheet and strip for Automobile - Part 1：Bake hardening steel 汽车用高强度冷连轧钢板及钢带 第1部分：烘烤硬化钢 |
China National Standards Automobile |
English PDF |
| GB/T 14951-2007 |
Measurement method of fuel saving technology for Automobiles 汽车节油技术评定方法 |
China National Standards Automobile |
English PDF |
| GB/T 20564.2-2006 |
Continuously cold rolled high strength steel sheet and strip for Automobile - Part 2: Dual phase steel 汽车用高强度冷连轧钢板及钢带 第2部分:双相钢 |
China National Standards Automobile |
English PDF |
| GB 15083-2006 |
Strength requirement and test of Automobile seats, their anchorages and any head restraints 汽车座椅、座椅固定装置及头枕强度要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 20461-2006 |
Rubber hoses and hose assemblies for Automobile power-steering systems ―Specification 汽车动力转向系统用橡胶软管和软管组合件 规范 |
China National Standards Automobile |
English PDF |
| GB 16487.13-2005 |
Environmental protection control standard for imported solid wastes as raw materials -- compressed piece of scrap Automobile 进口可用作原料的固体废物环境保护控制标准 废汽车压件 |
China National Standards Automobile |
English PDF |
| GB/T 3273-2005 |
Hot-rolled steel plates(sheets)and strips for Automobile frames 汽车大梁用热轧钢板和钢带 |
China National Standards Automobile |
English PDF |
| GB/T 13564-2005 |
Roller opposite forces type Automobile brake tester 滚筒反力式汽车制动检验台 |
China National Standards Automobile |
English PDF |
| GB 18463-2001 |
Physical qualifications for Automobile drivers and their test protocol 机动车驾驶员身体条件及其测评要求 |
China National Standards Automobile |
English PDF |
| GB/T 18343-2001 |
Specification for Automobile disk brakes being overhauled 汽车盘式制动器修理技术条件 |
China National Standards Automobile |
English PDF |
| GB 18296-2001 |
Safety property requirements and test methods for Automobile fuel tank 汽车燃油箱 安全性能要求和试验方法 |
China National Standards Automobile |
English PDF |
| GB/T 18275.2-2000 |
Specifications for Automobile braking transmission device being overhauled--Hydraulic braking 汽车制动传动装置修理技术条件 液压制动 |
China National Standards Automobile |
English PDF |
| GB/T 18275.1-2000 |
Specifications for Automobile braking transmission device being overhauled--Air braking 汽车制动传动装置修理技术条件 气压制动 |
China National Standards Automobile |
English PDF |
| GB 13895-1992 |
Heavy duty gear oil for Automobile(GL-5) 重负荷车辆齿轮油(GL-5) |
China National Standards Automobile |
English PDF |
| GB/T 13493-1992 |
Primere for Automobiles 汽车用底漆 |
China National Standards Automobile |
English PDF |
| GB/T 13492-1992 |
Finishes for Automobiles 各色汽车用面漆 |
China National Standards Automobile |
English PDF |
| GB/T 12678-1990 |
Reliability running test method for Automobiles 汽车可靠性行驶试验方法 |
China National Standards Automobile |
English PDF |
| Find out:170Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
