China National Standards

China Ball GB Standards List


  •  China "Ball" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 43853-2024 High-temperature Friction and Wear Performance Test of Laser Repair Layer-Ball-disc Method {译}
    激光修复层高温摩擦磨损性能试验-球-盘法
    China National Standards
    Ball

    English PDF
    GB/T 18916.13-2024 Ship Ballast water treatment system-Part 2: Electrolysis method {译}
    工业用水定额-第13部分:乙烯和丙烯
    China National Standards
    Ball

    English PDF
    GB/T 15651.7-2024 Printed board assembly - Part 6: Evaluation requirements for voids in Ball grid array (BGA) and land grid array (LGA) solder joints and test methods {译}
    半导体器件-第5-7部分:光电子器件-光电二极管和光电晶体管
    China National Standards
    Ball

    English PDF
    GB/T 43566-2023 Artificial grass surface footBall fields for primary and secondary schools {译}
    中小学人造草面层足球场地
    China National Standards
    Ball

    English PDF
    GB/T 43565-2023 Synthetic surface basketBall courts for primary and secondary schools {译}
    中小学合成材料面层篮球场地
    China National Standards
    Ball

    English PDF
    GB/T 43515-2023 High-altitude scientific Balloon release test procedures {译}
    高空科学气球发放测试规程
    China National Standards
    Ball

    English PDF
    GB/T 43330.4-2023 Ship's Ballast water treatment systems Part 4: Discharge sampling devices and procedures {译}
    船舶压载水处理系统 第4部分:排放取样装置和规程
    China National Standards
    Ball

    English PDF
    GB/T 30422-2023 Electrodeless fluorescent lamps (other than self-Ballasted lamps) Safety regulations {译}
    无极荧光灯(自镇流灯除外) 安全规范
    China National Standards
    Ball

    English PDF
    GB/T 24906-2023 Safety regulations for self-Ballasted LED lamps above 50V for general lighting {译}
    普通照明用50V以上自镇流LED灯 安全规范
    China National Standards
    Ball

    English PDF
    GB/T 19510.212-2023 Light source control devices Part 2-12: Special requirements for DC or AC electronic Ballasts for discharge lamps (other than fluorescent lamps) {译}
    光源控制装置 第2-12部分:放电灯(荧光灯除外)用直流或交流电子镇流器的特殊要求
    China National Standards
    Ball

    English PDF
    GB/T 19510.208-2023 Light source control devices Part 2-8: Special requirements for Ballasts for fluorescent lamps {译}
    光源控制装置 第2-8部分:荧光灯用镇流器的特殊要求
    China National Standards
    Ball

    English PDF
    GB/T 16844-2023 Safety regulations for self-Ballasted fluorescent lamps for general lighting {译}
    普通照明用自镇流荧光灯 安全规范
    China National Standards
    Ball

    English PDF
    GB/Z 41275.4-2023 Avionics Process Management Aerospace and Defense Electronic Systems Containing Lead-Free Solder Part 4: Ball Grid Array Ball Installation {译}
    航空电子过程管理 含无铅焊料航空航天及国防电子系统 第4部分:球栅阵列植球
    China National Standards
    Ball

    English PDF
    GB/T 292-2023 Rolling bearings Angular contact Ball bearings Dimensions {译}
    滚动轴承 角接触球轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB 21252-2023 Energy consumption limit per unit product for building sanitary ceramics and wear-resistant alumina Balls {译}
    建筑卫生陶瓷和耐磨氧化铝球单位产品能源消耗限额
    China National Standards
    Ball

    English PDF
    GB/T 43371-2023 General requirements for safety of tethered Balloons {译}
    系留气球安全性通用要求
    China National Standards
    Ball

    English PDF
    GB/T 23538-2023 Ordinary abrasives - Determination method of Ball milling toughness {译}
    普通磨料 球磨韧性测定方法
    China National Standards
    Ball

    English PDF
    GB/T 43330.1-2023 Ship Ballast water treatment systems Part 1: Requirements {译}
    船舶压载水处理系统 第1部分:要求
    China National Standards
    Ball

    English PDF
    GB/T 43403-2023 Road vehicles Trailers below 3.5t Quality inspection after fatigue test of welded traction brackets for connecting Balls {译}
    道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查
    China National Standards
    Ball

    English PDF
    GB/T 43316.4-2023 Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method {译}
    塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法
    China National Standards
    Ball

    English PDF
    GB/T 43121.1-2023 Ships and offshore technology Aquatic harmful species Part 1: Ballast water discharge sampling interface {译}
    船舶和海上技术 水生有害物种 第1部分:压载水排放取样接口
    China National Standards
    Ball

    English PDF
    GB/T 42539-2023 Rolling bearings - Ceramic Balls for bearings - Determination of strength (notched ball test) {译}
    滚动轴承 轴承用陶瓷球 强度测定(缺口球试验)
    China National Standards
    Ball

    English PDF
    GB/T 15879.604-2023 Mechanical standardization of semiconductor devices - Part 6-4: General rules for drawing outline drawings of surface mount semiconductor device packages - Dimensional measurement methods for Ball array (BGA) packages {译}
    半导体器件的机械标准化 第6-4部分:表面安装半导体器件封装外形图绘制的一般规则 焊球阵列(BGA)封装的尺寸测量方法
    China National Standards
    Ball

    English PDF
    GB/T 41605-2022 Silicon nitride materials for rolling bearing Balls - Test method for indentation fracture resistance at room temperature - Indentation method {译}
    滚动轴承球用氮化硅材料 室温压痕断裂阻力试验方法 压痕法
    China National Standards
    Ball

    English PDF
    GB/T 41440-2022 Drawing and writing instruments - ink Ballpoint pens and water-based ballpoint pens - Vocabulary {译}
    绘图和书写工具 油墨圆珠笔和水性圆珠笔 词汇
    China National Standards
    Ball

    English PDF
    GB/T 41490-2022 Test method for rolling contact fatigue of silicon nitride ceramics at room temperature Ball plate method {译}
    氮化硅陶瓷 室温下滚动接触疲劳试验方法 球板法
    China National Standards
    Ball

    English PDF
    GB/T 17445-2022 Cast grinding Balls
    铸造磨球
    China National Standards
    Ball

    English PDF
    GB 17896-2022 Allowable values of energy efficiency and energy efficiency grades for Ballasts used in gas discharge lamps for general lighting {译}
    普通照明用气体放电灯用镇流器能效限定值及能效等级
    China National Standards
    Ball

    English PDF
    GB/T 41766-2022 weather Balloon {译}
    气象气球
    China National Standards
    Ball

    English PDF
    GB/T 26699-2022 Ballpoint pen for exam {译}
    考试用圆珠笔
    China National Standards
    Ball

    English PDF
    GB/T 40310.2-2021 Ball splines—Part 2:Dynamic and static load ratings and rating life
    滚动花键副 第2部分:动态和静态额定载荷和额定寿命
    China National Standards
    Ball

    English PDF
    GB/T 40310.1-2021 Ball splines—Part 1:General characteristics and requirements
    滚动花键副 第1部分:一般特征和要求
    China National Standards
    Ball

    English PDF
    GB/T 39983-2021 Ball arc guide—Acceptance specifications
    滚珠圆弧导轨副 验收技术条件
    China National Standards
    Ball

    English PDF
    GB/T 39961-2021 Ball screw assembly -- Dimension of shaft-end type screw
    滚珠丝杠副 支承结构型式尺寸
    China National Standards
    Ball

    English PDF
    GB/T 39814-2021 Test method for impact strength of ultrathin glass—Ball drop method
    超薄玻璃抗冲击强度试验方法 落球冲击法
    China National Standards
    Ball

    English PDF
    GB/T 12237-2021 Steel Ball valves for petroleum, petrochemical and allied industries
    石油、石化及相关工业用的钢制球阀
    China National Standards
    Ball

    English PDF
    GB/T 24604-2021 Rolling bearings-Angular contact thrust Ball bearings and units for machine tool screws
    滚动轴承 机床丝杠用推力角接触球轴承及单元
    China National Standards
    Ball

    English PDF
    GB/T 39507-2020 Leather—Physical and mechanical tests—Determination of abrasion resistance:Martindale Ball plate method
    皮革 物理和机械试验 耐磨性能的测定:马丁代尔球盘法
    China National Standards
    Ball

    English PDF
    GB/T 24328.7-2020 Tisue paper and tissue products—Part 7: Determination of Ball burst strength
    卫生纸及其制品 第7部分:球形耐破度的测定
    China National Standards
    Ball

    English PDF
    GB/T 24328.9-2020 Tissue paper and tissue products—Part 9: Determination of wet Ball burst strength
    卫生纸及其制品 第9部分:湿球形耐破度的测定
    China National Standards
    Ball

    English PDF
    GB/T 38695-2020 Technical specification for Ballastless track of urban rail transit
    城市轨道交通无砟轨道技术条件
    China National Standards
    Ball

    English PDF
    GB/T 25318-2019 Locking devices for Ball and socket couplings of string insulator units—Dimensions and tests
    绝缘子串元件球窝联接用锁紧销 尺寸和试验
    China National Standards
    Ball

    English PDF
    GB/T 4056-2019 Dimensions of Ball and socket couplings of string insulator units
    绝缘子串元件的球窝联接尺寸
    China National Standards
    Ball

    English PDF
    GB/T 25318-2019 Locking devices for Ball and socket couplings of string insulator units—Dimensions and tests
    绝缘子串元件球窝联接用锁紧销 尺寸和试验
    China National Standards
    Ball

    English PDF
    GB/T 4056-2019 Dimensions of Ball and socket couplings of string insulator units
    绝缘子串元件的球窝联接尺寸
    China National Standards
    Ball

    English PDF
    GB/T 37891.6-2019 Cutter arbors with parallel key and tenon drive—Part 6: Dimensions and designation of tool holders with modular taper interface with Ball track system
    带平键和端键传动的铣刀杆 第6部分:带钢球拉紧系统的模块圆锥柄刀杆的尺寸和标记
    China National Standards
    Ball

    English PDF
    GB/T 37853-2019 Gel ink Ball pens and refills
    中性墨水圆珠笔和笔芯
    China National Standards
    Ball

    English PDF
    GB/T 37842-2019 Ball valves of thermoplastics materials
    热塑性塑料球阀
    China National Standards
    Ball

    English PDF
    GB/T 37827-2019 Welded Ball valve for urban heating
    城镇供热用焊接球阀
    China National Standards
    Ball

    English PDF
    GB/T 26714-2019 Ball point pens and refills
    油墨圆珠笔和笔芯
    China National Standards
    Ball

    English PDF
    GB/T 32017-2019 Roller Ball pens and refills
    水性墨水圆珠笔和笔芯
    China National Standards
    Ball

    English PDF
    GB/T 37330-2019 Sleeper for Ballasted track—Concrete sleeper
    有砟轨道轨枕 混凝土枕
    China National Standards
    Ball

    English PDF
    GB/T 25330-2019 Ballast cleaning machinery
    道砟清筛机
    China National Standards
    Ball

    English PDF
    GB/T 3142-2019 Standard test method for determination of load-carrying capacity of lubricants—Four-Ball method
    润滑剂承载能力的测定 四球法
    China National Standards
    Ball

    English PDF
    GB/T 37261-2018 Ball joint compensator for district heating system
    城镇供热管道用球型补偿器
    China National Standards
    Ball

    English PDF
    GB/T 36221-2018 Thin extra light annular Ball bearings primarily for aircraft generators and motor-generators
    航空电机用薄超轻型深沟球轴承
    China National Standards
    Ball

    English PDF
    GB/T 36223-2018 Wide cartridge annular Ball bearings primarily for aircraft generators and motor-generators
    航空电机用宽型深沟球轴承
    China National Standards
    Ball

    English PDF
    GB/T 36510-2018 Hot-air Balloon
    热气球
    China National Standards
    Ball

    English PDF
    GB/T 36254-2018 Standard light annular Ball bearings primarily for aircraft generators and motor-generators
    航空电机用标准轻型深沟球轴承
    China National Standards
    Ball

    English PDF
    GB/T 24152-2018 Sports shoes for basketBall and volleyball
    篮排球专业运动鞋
    China National Standards
    Ball

    English PDF
    GB/T 20058-2017 Rolling bearings-Single-row angular contact Ball bearings-Chamfer dimensions for outer ring non-thrust side
    滚动轴承 单列角接触球轴承 外圈非推力端倒角尺寸
    China National Standards
    Ball

    English PDF
    GB/T 34430.1-2017 Ships and marine technology—Protective coatings and inspection method —Part 1: Dedicated sea water Ballast tanks
    船舶与海上技术 保护涂层和检查方法 第1部分:专用海水压载舱
    China National Standards
    Ball

    English PDF
    GB/T 17587.1-2017 Ball screws—Part 1: Vocabulary and designation
    滚珠丝杠副 第1部分:术语和符号
    China National Standards
    Ball

    English PDF
    GB/T 17587.3-2017 Ball screws—Part 3:Acceptance conditions and acceptance tests
    滚珠丝杠副 第3部分:验收条件和验收检验
    China National Standards
    Ball

    English PDF
    GB/T 22517.4-2017 Technical requirements and test methods for sports fields—Part 4: Synthetic surface for basketBall
    体育场地使用要求及检验方法 第4部分:合成面层篮球场地
    China National Standards
    Ball

    English PDF
    GB/T 19079.32-2017 Operation condition and technical requirements for gymnasium and playground—Part 32: FootBall place
    体育场所开放条件与技术要求 第32部分:足球运动场所
    China National Standards
    Ball

    English PDF
    GB/T 34279-2017 Safety for fence facilities of cage-footBall—General requirements
    笼式足球场围网设施安全 通用要求
    China National Standards
    Ball

    English PDF
    GB/T 33903-2017 Automatic solar tracker of shading Ball model for diffuse radiation measurement
    散射辐射测量用遮光球式全自动太阳跟踪器
    China National Standards
    Ball

    English PDF
    GB/T 33524.1-2017 Modular taper interface with Ball track system—Part 1: Dimensions and designation of shanks
    带有钢球拉紧系统的模块圆锥接口 第1部分:柄部尺寸和标记
    China National Standards
    Ball

    English PDF
    GB/T 33524.2-2017 Modular taper interface with Ball track system—Part 2: Dimensions and designation of receivers
    带有钢球拉紧系统的模块圆锥接口 第2部分:安装孔尺寸和标记
    China National Standards
    Ball

    English PDF
    GB/T 5169.21-2017 Fire hazard testing for electric and electronic products—Part 21: Abnormal heat—Ball pressure test method
    电工电子产品着火危险试验 第21部分:非正常热 球压试验方法
    China National Standards
    Ball

    English PDF
    GB/T 23541-2017 Bonded abrasive products—Grinding wheel for steel Balls
    固结磨具 磨钢球砂轮
    China National Standards
    Ball

    English PDF
    GB/T 24218.5-2016 Textiles—Test methods for nonwovens—Part 5: Determination of resistance to mechanical penetration (Ball burst method)
    纺织品 非织造布试验方法 第5部分:耐机械穿透性的测定(钢球顶破法)
    China National Standards
    Ball

    English PDF
    GB/T 20027.1-2016 Rubber-or plastics-coated fabrics—Determination of bursting strength—Part 1: Steel-Ball method
    橡胶或塑料涂覆织物 破裂强度的测定 第1部分:钢球法
    China National Standards
    Ball

    English PDF
    GB/T 15185-2016 Flanged iron and copper Ball valves
    法兰连接铁制和铜制球阀
    China National Standards
    Ball

    English PDF
    GB/T 28878.3-2016 Specification of the rotating component in space science experiments—Part 3:Ball bearing acceptance
    空间科学实验转动部件规范 第3部分:滚动轴承验收
    China National Standards
    Ball

    English PDF
    GB/T 32683.1-2016 Plastics—Determination of viscosity using a falling-Ball viscometer—Part 1: Inclined-tube method
    塑料 用落球黏度计测定黏度 第1部分:斜管法
    China National Standards
    Ball

    English PDF
    GB/T 32497-2016 Test method of Ballistic resistance against fragment simulating projectiles for fiber-reinforced composites—V50 method
    纤维增强复合材料抗破片模拟弹性能试验方法 V50法
    China National Standards
    Ball

    English PDF
    GB/T 32493-2016 Test method of Ballistic resistance for fibre reinforced composites—Specific absorbed energy by perforation method
    纤维增强复合材料抗弹性能试验方法 贯穿比吸能法
    China National Standards
    Ball

    English PDF
    GB/T 19706-2015 FootBall shoes
    足球鞋
    China National Standards
    Ball

    English PDF
    GB/T 32334-2015 Rolling bearings—Matched angular contact Ball bearings—Specifications
    滚动轴承 组配角接触球轴承 技术条件
    China National Standards
    Ball

    English PDF
    GB/T 32325-2015 Rolling bearings—Specifications for vibration(velocity)of deep groove Ball bearings
    滚动轴承 深沟球轴承振动(速度)技术条件
    China National Standards
    Ball

    English PDF
    GB/T 32323-2015 Rolling bearings—Measuring methods for axial internal clearance of four-point-contact Ball bearings
    滚动轴承 四点接触球轴承轴向游隙的测量方法
    China National Standards
    Ball

    English PDF
    GB/T 32321-2015 Rolling bearings—Sealed deep groove Ball bearings— Performance test rule of dustproofing,grease leakage and temperature rise
    滚动轴承 密封深沟球轴承 防尘、漏脂及温升性能试验规程
    China National Standards
    Ball

    English PDF
    GB/T 301-2015 Rolling bearings—Thrust Ball bearings—Boundary dimensions
    滚动轴承 推力球轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB 20053-2015 Minimum allowable values of energy efficiency and energy efficiency grades for Ballasts of metal-halide lamps
    金属卤化物灯用镇流器能效限定值及能效等级
    China National Standards
    Ball

    English PDF
    GB/T 32017-2015 Roller Ball pens and refills
    水性墨水圆珠笔和笔芯
    China National Standards
    Ball

    English PDF
    GB/T 31703-2015 Ceramic Ball bearings—Silicon nitride balls
    陶瓷球轴承 氮化硅球
    China National Standards
    Ball

    English PDF
    GB/T 9284.1-2015 Binders for paints and varnishes—Determination of softening point—Part 1:Ring-and-Ball method
    色漆和清漆用漆基 软化点的测定 第1部分:环球法
    China National Standards
    Ball

    English PDF
    GB/T 296-2015 Rolling bearings—Double row angular contact Ball bearings—Boundary dimensions
    滚动轴承 双列角接触球轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB/T 294-2015 Rolling bearings—Three-point and four-point contact Ball bearings—Boundary dimensions
    滚动轴承 三点和四点接触球轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB/T 32017-2015 Roller Ball pens and refills
    水性墨水圆珠笔和笔芯
    China National Standards
    Ball

    English PDF
    GB/T 31330-2014 The performance test procedures of recirculating Ball power steering lips seals?
    汽车循环球式动力转向器唇形密封圈性能试验方法
    China National Standards
    Ball

    English PDF
    GB/T 31112-2014 Classification of Non-directional Self-Ballasted LED-lamps for general lighting services
    普通照明用非定向自镇流LED灯规格分类
    China National Standards
    Ball

    English PDF
    GB/T 31111-2014 Classification of self-Ballasted LED reflector lamps
    反射型自镇流LED灯规格分类
    China National Standards
    Ball

    English PDF
    GB/T 24908-2014 Non-directional Self-Ballasted LED-lamps for general lighting services―Performance requirements
    普通照明用非定向自镇流LED灯 性能要求
    China National Standards
    Ball

    English PDF
    GB/T 30818-2014 Fully welded body Ball valves for pipeline transportation systems in petroleum and natural gas industries
    石油和天然气工业管线输送系统用全焊接球阀
    China National Standards
    Ball

    English PDF
    GB/T 4507-2014 Standard test method for softening point of bitumen―Ring-and-Ball apparatus
    沥青软化点测定法 环球法
    China National Standards
    Ball

    English PDF
    GB 19079.13-2013 Operation conditions and technical requirements for gymnasium and playground―Part 13: Balloon and airship place
    体育场所开放条件与技术要求 第13部分:气球与飞艇场所
    China National Standards
    Ball

    English PDF
    GB/T 30214-2013 Aircraft—Non-metallic pulleys with Ball bearings for control cables—Dimensions and loads
    飞机 操纵钢索用带球轴承非金属滑轮 尺寸和载荷
    China National Standards
    Ball

    English PDF
    GB 30255-2013 Minimum allowable values of energy efficiency and energy efficiency grades of non-directional self-Ballasted LED-lamps for general lighting services
    普通照明用非定向自镇流LED灯能效限定值及能效等级
    China National Standards
    Ball

    English PDF
    GB/T 17263-2013 Self-Ballasted lamps for general lighting service - Performance requirements
    普通照明用自镇流荧光灯 性能要求
    China National Standards
    Ball

    English PDF
    GB/T 30043-2013 Coal direct liquefaction―Determination of softening point of liquefaction residue―Ring and Ball apparatus
    煤炭直接液化 液化残渣软化点的测定 环球法
    China National Standards
    Ball

    English PDF
    GB/T 7218-2013 Rolling bearings - Miniature radial Ball bearings with flanged outer ring - Boundary dimensions
    滚动轴承 凸缘外圈微型向心球轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB/T 7217-2013 Rolling bearings - Radial Ball bearings with flanged outer ring - Flange dimensions
    滚动轴承 凸缘外圈向心球轴承 凸缘尺寸
    China National Standards
    Ball

    English PDF
    GB/T 4604.2-2013 Rolling bearings - Internal clearance - Part 2: Axial internal clearance for four-point-contact Ball bearings
    滚动轴承 游隙 第2部分:四点接触球轴承的轴向游隙
    China National Standards
    Ball

    English PDF
    GB/T 308.1-2013 Rolling bearings - Balls - Part 1: Steel balls
    滚动轴承 球 第1部分:钢球
    China National Standards
    Ball

    English PDF
    GB/T 281-2013 Rolling bearings - Self-aligning Ball bearings - Boundary dimensions
    滚动轴承 调心球轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB/T 276-2013 Rolling bearings - Deep groove Ball bearings - Boundary dimensions
    滚动轴承 深沟球轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB/T 19673.2-2013 Rolling bearings - Accessories for sleeve type linear Ball bearings - Part 2: Boundary dimensions and tolerances for series 5
    滚动轴承 套筒型直线球轴承附件 第2部分:5系列外形尺寸和公差
    China National Standards
    Ball

    English PDF
    GB/T 19673.1-2013 Rolling bearings - Accessories for sleeve type linear Ball bearings - Part 1:Boundary dimensions and tolerances for series 1 and 3
    滚动轴承 套筒型直线球轴承附件 第1部分:1、3系列外形尺寸和公差
    China National Standards
    Ball

    English PDF
    GB 19044-2013 Minimum allowable values of energy efficiency and the energy efficiency grades of self-Ballasted fluorescent lamps for general lighting service
    普通照明用自镇流荧光灯能效限定值及能效等级
    China National Standards
    Ball

    English PDF
    GB/T 29296-2012 Self-Ballasted LED reflector lamps - Performance requirements
    反射型自镇流LED灯 性能要求
    China National Standards
    Ball

    English PDF
    GB/T 29295-2012 Test methods of performance of self-Ballasted LED reflector lamps
    反射型自镇流LED灯性能测试方法
    China National Standards
    Ball

    English PDF
    GB 29144-2012 Minimum allowable values of energy efficiency and the energy efficiency grades for self-Ballasted electrodeless fluorescent lamps with general lighting service
    普通照明用自镇流无极荧光灯能效限定值及能效等级
    China National Standards
    Ball

    English PDF
    GB 29143-2012 Minimum allowable values of energy efficiency and energy efficiency grades of Ballasts for electrodeless fluorescent lamps
    单端无极荧光灯用交流电子镇流器能效限定值及能效等级
    China National Standards
    Ball

    English PDF
    GB/T 16940-2012 Rolling bearings - Sleeve type linear Ball bearings - Boundary dimensions and tolerances
    滚动轴承 套筒型直线球轴承 外形尺寸和公差
    China National Standards
    Ball

    English PDF
    GB/T 28698-2012 Rolling bearings - Deep groove Ball bearings for electric motors - Specifications
    滚动轴承 电机用深沟球轴承 技术条件
    China National Standards
    Ball

    English PDF
    GB/T 28697-2012 Rolling bearings - Aligning thrust Ball bearings and aligning seat washers - Boundary dimensions
    滚动轴承 调心推力球轴承和调心座垫圈 外形尺寸
    China National Standards
    Ball

    English PDF
    GB 17896-2012 Minimum allowable values of the energy efficiency and the energy efficiency grades of Ballasts for tubular fluorescent lamps
    管形荧光灯镇流器能效限定值及能效等级
    China National Standards
    Ball

    English PDF
    GB/T 27846-2011 Chemicals - Measurement of viscosity using the Hoppler falling-Ball viscometer
    化学品 黏度测定Hoppler落球式黏度计法
    China National Standards
    Ball

    English PDF
    GB/T 28230-2011 Enumeration of coliforms in Ballast water of entry-exit ships by membrane filtration
    膜过滤法测定入出境船舶压舱水中大肠菌群
    China National Standards
    Ball

    English PDF
    GB/T 28229-2011 Detection of diarrheagenic Escherichia coli in Ballast water of entry-exit ships
    入出境船舶压舱水中致泻大肠埃希氏菌的检验方法
    China National Standards
    Ball

    English PDF
    GB/T 28228-2011 Detection of Listeria monocytogenes in Ballast water of entry-exit ships
    入出境船舶压舱水中单核细胞增生李斯特氏菌的检验方法
    China National Standards
    Ball

    English PDF
    GB/T 26930.2-2011 Carbonaceous materials for the production of primary aluminium - Pitch for electrodes - Part 2:Determination of softening point by the ring and Ball method
    原铝生产用炭素材料 煤沥青 第2部分:软化点的测定 环球法
    China National Standards
    Ball

    English PDF
    GB/T 26714-2011 Ball point pens and refills
    油墨圆珠笔和笔芯
    China National Standards
    Ball

    English PDF
    GB/T 26699-2011 Ball pens for exam
    考试用圆珠笔
    China National Standards
    Ball

    English PDF
    GB/T 26697-2011 Low-frequency square wave electronic Ballasts for metal halide lamps
    金卤灯用低频方波电子镇流器
    China National Standards
    Ball

    English PDF
    GB/T 26692-2011 Frequency-flick-free a.c. supplied electronic Ballasts for tubular fluorescent lamps - Performance requirements
    管形荧光灯用无频闪电子镇流器 性能要求
    China National Standards
    Ball

    English PDF
    GB/T 26147-2010 Specification for Ball of ball valve
    球阀球体 技术条件
    China National Standards
    Ball

    English PDF
    GB/T 26146-2010 Eccentric stmi-Ball valve
    偏心半球阀
    China National Standards
    Ball

    English PDF
    GB/T 25992-2010 Solid Ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions
    整体硬质合金和陶瓷直柄球头立铣刀 尺寸
    China National Standards
    Ball

    English PDF
    GB/T 25980-2010 Road vehicles - Coupling Balls for caravans and light trailers - Dimensions
    道路车辆 旅居挂车和轻型挂车的连接球 尺寸
    China National Standards
    Ball

    English PDF
    GB/T 25708-2010 Ball mill and rod mill
    球磨机和棒磨机
    China National Standards
    Ball

    English PDF
    GB/T 25705-2010 Overflow Ball mill - Wear consumption of liner plate
    溢流型球磨机 衬板磨耗
    China National Standards
    Ball

    English PDF
    GB/T 25704-2010 Overflow Ball mill - Specific metal consumption
    溢流型球磨机 金属单耗
    China National Standards
    Ball

    English PDF
    GB/T 25703-2010 Overflow Ball mill - Energy consumption index
    溢流型球磨机 能耗指标
    China National Standards
    Ball

    English PDF
    GB/T 308.2-2010 Rolling bearings - Balls - Part 2: Ceramic balls
    滚动轴承 球 第2部分:陶瓷球
    China National Standards
    Ball

    English PDF
    GB/T 25765-2010 Rolling bearings - Ball bearings for automobile transmission
    滚动轴承 汽车变速箱用球轴承
    China National Standards
    Ball

    English PDF
    GB/T 25761-2010 Rolling bearings - Combined needle roller bearings with angular contact Ball bearings - Boundary dimensions
    滚动轴承 滚针和角接触球组合轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB/T 25760-2010 Rolling bearings - Combined needle roller bearings with thrust Ball bearings - Boundary dimensions
    滚动轴承 滚针和推力球组合轴承 外形尺寸
    China National Standards
    Ball

    English PDF
    GB/T 25318-2010 Locking devices for Ball and socket couplings of string insulator units:Dimensions and tests.
    绝缘子串元件球窝联接用锁紧销:尺寸和试验
    China National Standards
    Ball

    English PDF
    GB/T 25330-2010 General technical specifications for Ballast cleaning machinery
    道砟清筛机通用技术条件
    China National Standards
    Ball

    English PDF
    GB 24906-2010 Self-Ballasted LED-Lamps for general lighting services >50V safety specifications
    普通照明用50V以上自镇流LED灯 安全要求
    China National Standards
    Ball

    English PDF
    GB/T 19408.5-2009 Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 5: Dimensions of Ball-type coupling device
    农业车辆 挂车和牵引车的机械连接 第5部分:球形连接
    China National Standards
    Ball

    English PDF
    GB/T 24610.2-2009 Rolling bearings - Measuring methods for vibration - Part 2: Radial Ball bearings with cylindrical bore and outside surface
    滚动轴承 振动测量方法 第2部分:具有圆柱孔和圆柱外表面的向心球轴承
    China National Standards
    Ball

    English PDF
    GB/T 24604-2009 Rolling bearings - Angular contact thrust Ball bearings used for machine tool
    滚动轴承 机床丝杠用推力角接触球轴承
    China National Standards
    Ball

    English PDF
    GB/T 17445-2009 Cast grinding Balls
    铸造磨球
    China National Standards
    Ball

    English PDF
    GB 19510.9-2009 Lamp controlgear - Part 9: Particular requirements for Ballasts for fluorescent lamps
    灯的控制装置 第9部分:荧光灯用镇流器的特殊要求
    China National Standards
    Ball

    English PDF
    GB 19510.8-2009 Lamp controlgear - Part 8: Particular requirements for d.c. supplied electronic Ballasts for emergency lighting
    灯的控制装置 第8部分:应急照明用直流电子镇流器的特殊要求
    China National Standards
    Ball

    English PDF
    GB 19510.4-2009 Lamp controlgear - Part 4: Particular requirements for a.c.supplied electronic Ballasts for fluorescent lamps
    灯的控制装置 第4部分:荧光灯用交流电子镇流器的特殊要求
    China National Standards
    Ball

    English PDF
    GB 19510.10-2009 Lamp controlgear - Part 10: Particular requirements for Ballasts for discharge lamps(excluding fluorescent lamps)
    灯的控制装置 第10部分:放电灯(荧光灯除外)用镇流器的特殊要求
    China National Standards
    Ball

    English PDF
    GB/T 15144-2009 A.C. supplied electronic Ballasts for tubular fluorescent lamps - Performance requirements
    管形荧光灯用交流电子镇流器 性能要求
    China National Standards
    Ball

    English PDF
    GB/T 24328.7-2009 Tissue paper and tissue products - Part 7: Determination of Ball burst strength
    卫生纸及其制品 第7部分:球形耐破度的测定
    China National Standards
    Ball

    English PDF
    GB/T 15492-2009 Functional classification of wheelchair basketBall and swimming for disabled athletes
    残疾人轮椅篮球和游泳运动员功能分级
    China National Standards
    Ball

    English PDF
    GB/T 24152-2009 Sport footwear for basketBall and volleyball
    篮排球专业运动鞋
    China National Standards
    Ball

    English PDF
    GB/T 23541-2009 Bonded abrasive products - Grinding wheel for steel Balls
    固结磨具 磨钢球砂轮
    China National Standards
    Ball

    English PDF
    GB/T 23538-2009 Conventional abrasive - Testing method for toughness ( Ball mill method )
    普通磨料 球磨韧性测定方法
    China National Standards
    Ball

    English PDF
    GB/T 23564.4-2009 Ball-bearing guide steel-plate punch holders of stamping dies - Part 4: Four-pillar punch holders
    冲模滚动导向钢板上模座 第4部分:四导柱上模座
    China National Standards
    Ball

    English PDF
    GB/T 23564.3-2009 Ball-bearing guide steel-plate punch holders of stamping dies - Part 3: Center-pillar punch holders
    冲模滚动导向钢板上模座 第3部分:中间导柱上模座
    China National Standards
    Ball

    English PDF
    GB/T 23564.2-2009 Ball-bearing guide steel-plate punch holders of stamping dies - Part 2: Diagonal-pillar punch holders
    冲模滚动导向钢板上模座 第2部分:对角导柱上模座
    China National Standards
    Ball

    English PDF
    GB/T 23564.1-2009 Ball-bearing guide steel-plate punch holders of stamping dies - Part 1: Rear-pillar punch holders
    冲模滚动导向钢板上模座 第1部分:后侧导柱上模座
    China National Standards
    Ball

    English PDF
    GB/T 23563.4-2009 Ball-bearing guide steel-plate die sets of stamping dies - Part 4: Four-pillar die sets
    冲模滚动导向钢板模架 第4部分:四导柱模架
    China National Standards
    Ball

    English PDF
    GB/T 23563.3-2009 Ball-bearing guide steel-plate die sets of stamping dies - Part 3: Center-pillar die sets
    冲模滚动导向钢板模架 第3部分:中间导柱模架
    China National Standards
    Ball

    English PDF
    GB/T 23563.2-2009 Ball-bearing guide steel-plate die sets of stamping dies - Part 2: Diagonal-pillar die sets
    冲模滚动导向钢板模架 第2部分:对角导柱模架
    China National Standards
    Ball

    English PDF
    GB/T 23563.1-2009 Ball-bearing guide steel-plate die sets of stamping dies - Part 1: Rear-pillar die sets
    冲模滚动导向钢板模架 第1部分:后侧导柱模架
    China National Standards
    Ball

    English PDF
    GB/T 3917.1-2009 Textiles - Tear properties of fabrics - Part 1: Determination of tear force using Ballistic pendulum method (Elmendorf)
    纺织品 织物撕破性能 第1部分:冲击摆锤法撕破强力的测定
    China National Standards
    Ball

    English PDF
    GB/T 15722-2009 Competitive qualification of medical stardard of volleyBallsitting for disabled athletes
    残疾人坐地排球运动员参赛资格的医学标准
    China National Standards
    Ball

    English PDF
    GB/T 22706-2008 Self-Ballasted cold cathode fluorescent lamps - Service-performance requirements
    自镇流冷阴极荧光灯 性能要求
    China National Standards
    Ball

    English PDF
    GB 23176-2008 BasketBall backstop
    篮球架
    China National Standards
    Ball

    English PDF
    GB 14536.4-2008 Automatic electrical controls for household and similar use - Particular requirements for thermal protectors for Ballasts for tubular fluorescent lamps
    家用和类似用途电自动控制器 管形荧光灯镇流器热保护器的特殊要求
    China National Standards
    Ball

    English PDF
    GB/T 22892-2008 FootBall
    足球
    China National Standards
    Ball

    English PDF
    GB/T 22882-2008 VolleyBall
    排球
    China National Standards
    Ball

    English PDF
    GB/T 22868-2008 BasketBall
    篮球
    China National Standards
    Ball

    English PDF
    GB/T 22754-2008 Tennis Ball
    网球
    China National Standards
    Ball

    English PDF
    GB/T 15042-2008 Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
    灯用附件 放电灯(管形荧光灯除外)用镇流器 性能要求
    China National Standards
    Ball

    English PDF
    GB/T 14625.5-2008 Test methods for basketBall, football, volleyball and handball - Part 5: Measurement of circumference and its variation
    篮球、足球、排球、手球试验方法 第5部分:圆周长、圆周差的测量
    China National Standards
    Ball

    English PDF
    GB/T 14625.4-2008 Test methods for basketBall, football, volleyball and handball - Part 4: Test conditions and sample preparation
    篮球、足球、排球、手球试验方法 第4部分:试验条件与试样准备
    China National Standards
    Ball

    English PDF
    GB/T 14625.3-2008 Test methods for basketBall, football, volleyball and handball - Part 3: The determination of resistance to shock
    篮球、足球、排球、手球试验方法 第3部分:动态耐冲击试验方法
    China National Standards
    Ball

    English PDF
    GB/T 14625.2-2008 Test methods for basketBall, football, volleyball and handball - Part 2: The measurement of bouncing altitude
    篮球、足球、排球、手球试验方法 第2部分:反弹高度测定方法
    China National Standards
    Ball

    English PDF
    GB/T 14625.1-2008 Test methods for basketBall, football, volleyball and handball - Part 1: The measurement of roundness
    篮球、足球、排球、手球试验方法 第1部分:圆度测定方法
    China National Standards
    Ball

    English PDF
    GB/T 14044-2008 Ballasts for tubular fluorescent lamps - Performance requirements
    管形荧光灯用镇流器 性能要求
    China National Standards
    Ball

    English PDF
    GB/T 22517.3-2008 Technical requirements and test method for sports field - Part 3: BaseBall and softball
    体育场地使用要求及检验方法 第3部分:棒球、垒球场地
    China National Standards
    Ball

    English PDF
    GB/T 7550-2008 Synchronizing universal coupling with Ball and socket - Test method
    球笼式同步万向联轴器 试验方法
    China National Standards
    Ball

    English PDF
    GB/T 7549-2008 Synchronizing universal coupling with Ball and socket
    球笼式同步万向联轴器
    China National Standards
    Ball

    English PDF
    GB/T 6670-2008 Flexible cellular polymeric materials - Determination of resilience by Ball rebound
    软质泡沫聚合材料 落球法回弹性能的测定
    China National Standards
    Ball

    English PDF
    GB/T 3398.1-2008 Plastics - Determination of hardness - Part 1: Ball indentation method
    塑料 硬度测定 第1部分:球压痕法
    China National Standards
    Ball

    English PDF
    GB/T 4056-2008 Ball and socket coupling dimensions of string insulator units
    绝缘子串元件的球窝连接尺寸
    China National Standards
    Ball

    English PDF
    GB 16844-2008 Self-Ballasted lamps for general lighting services - Safety requirements
    普通照明用自镇流灯的安全要求
    China National Standards
    Ball

    English PDF
    GB/T 6823-2008 Ballast tanks paint for ship
    船舶压载舱漆
    China National Standards
    Ball

    English PDF
    GB/T 17587.5-2008 Ball screws - Part 5: Static and dynamic load ratings and operational life
    滚珠丝杠副 第5部分:轴向额定静载荷和动载荷及使用寿命
    China National Standards
    Ball

    English PDF
    GB/T 17587.4-2008 Ball screws - Part 4: Static axial rigidity
    滚珠丝杠副 第4部分:轴向静刚度
    China National Standards
    Ball

    English PDF
    GB/T 2861.8-2008 Guide unit for stamping dies - Part 8: Guide pillars with taper lead for Ball-bearing
    冲模导向装置 第8部分:滚动导向可卸导柱
    China National Standards
    Ball

    English PDF
    GB/T 2861.4-2008 Guide unit for stamping dies - Part 4: Guide bushes for Ball-bearing
    冲模导向装置 第4部分:滚动导向导套
    China National Standards
    Ball

    English PDF
    GB/T 2861.2-2008 Guide unit for stamping dies - Part 2: Guide pillars for Ball-bearing
    冲模导向装置 第2部分:滚动导向导柱
    China National Standards
    Ball

    English PDF
    GB/T 2856.2-2008 Holders for Ball-bearing die sets for stamping dies - Part 2: Die holders for die sets
    冲模滚动导向模座 第2部分:下模座
    China National Standards
    Ball

    English PDF
    GB/T 2856.1-2008 Holders for Ball-bearing die sets for stamping dies - Part 1: Punch holders for die sets
    冲模滚动导向模座 第1部分:上模座
    China National Standards
    Ball

    English PDF
    GB/T 2852-2008 Ball-bearing die sets for stamping dies
    冲模滚动导向模架
    China National Standards
    Ball

    English PDF
    GB 21554-2008 Self-Ballasted electrodeless fluorescent lamps for general lighting services - Safety requirements
    普通照明用自镇流无极荧光灯 安全要求
    China National Standards
    Ball

    English PDF
    GB/T 21385-2008 Metal-seated Ball valve
    金属密封球阀
    China National Standards
    Ball

    English PDF

    Find out:246Items   |  To Page of: First -Previous-Next -Last  | 1 2

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards