Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 232-2024 |
Metallic materials - Bend test method {译} 金属材料-弯曲试验方法 |
China National Standards Bend |
 English PDF |
| GB/T 23144-2023 |
Paper and paperboard Determination of Bending stiffness General principles of the two-point, three-point and four-point methods {译} 纸和纸板 弯曲挺度的测定 两点法、三点法和四点法的通用原理 |
China National Standards Bend |
English PDF |
| GB/T 43354-2023 |
Plane Bending fatigue test method for copper alloy elastic strips {译} 铜合金弹性带材平面弯曲疲劳试验方法 |
China National Standards Bend |
English PDF |
| GB/T 43296-2023 |
Test method for room temperature Bending fatigue properties of fine ceramics {译} 精细陶瓷室温弯曲疲劳性能试验方法 |
China National Standards Bend |
English PDF |
| GB/T 43316.3-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method {译} 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 |
China National Standards Bend |
English PDF |
| GB/T 5334-2021 |
Passenger car wheel Bending and radial fatigue performance requirements and test methods "Modification No. 1" {译} 乘用车 车轮 弯曲和径向疲劳性能要求及试验方法《第1号修改单》 |
China National Standards Bend |
English PDF |
| GB/T 42895-2023 |
Microelectromechanical systems (MEMS) technology Silicon-based MEMS microstructure Bending strength test method {译} 微机电系统（MEMS）技术 硅基MEMS微结构弯曲强度试验方法 |
China National Standards Bend |
English PDF |
| GB/T 42667-2023 |
Test method for room temperature isobiaxial Bending strength of fine ceramics - double loop method {译} 精细陶瓷室温等双轴弯曲强度试验方法 双环法 |
China National Standards Bend |
English PDF |
| GB/T 33061.5-2023 |
Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant Bending vibration method {译} 塑料 动态力学性能的测定 第5部分：非共振弯曲振动法 |
China National Standards Bend |
English PDF |
| GB/T 42472-2023 |
Critical current measurement Retained critical current of silver-coated Bi-2223 superconducting wire after double Bending at room temperature {译} 临界电流测量 银包套Bi-2223超导线室温双弯曲后的保留临界电流 |
China National Standards Bend |
English PDF |
| GB/T 42471-2023 |
Nanotechnology - Bending test method for flexible nano energy storage devices {译} 纳米技术 柔性纳米储能器件弯曲测试方法 |
China National Standards Bend |
English PDF |
| GB/T 41264-2022 |
Sheet metal Bending robot safety requirements {译} 板料折弯机器人 安全要求 |
China National Standards Bend |
English PDF |
| GB/T 11546.2-2022 |
Plastics - Determination of creep properties - Part 2: Three-point Bending creep {译} 塑料 蠕变性能的测定 第2部分:三点弯曲蠕变 |
China National Standards Bend |
English PDF |
| GB/T 9771.7-2022 |
Single-mode optical fibers for telecommunication - Part 7: Characteristics of Bend loss insensitive single-mode optical fibers {译} 通信用单模光纤 第7部分：弯曲损耗不敏感单模光纤特性 |
China National Standards Bend |
English PDF |
| GB/T 41762.2-2022 |
Fiber reinforced plastic composites - Determination of through-thickness properties of laminates - Part 2: Determination of elastic modulus, strength and Weibull size effect of carbon fiber unidirectional laminates by Bending tests {译} 纤维增强塑料复合材料 层合板厚度方向性能的测定 第2部分：弯曲试验测定碳纤维单向层合板的弹性模量、强度和威布尔尺寸效应 |
China National Standards Bend |
English PDF |
| GB/T 41852-2022 |
Semiconductor devices; microelectromechanical devices; Bending and shearing test methods for bonding strength of MEMS structures {译} 半导体器件 微机电器件 MEMS结构黏结强度的弯曲和剪切试验方法 |
China National Standards Bend |
English PDF |
| GB/T 40403-2021 |
Corrosion of metals and alloys—Methodology for determining the resistance of metals to stress corrosion cracking using the four-point Bend method 金属和合金的腐蚀 用四点弯曲法测定金属抗应力腐蚀开裂的方法 |
China National Standards Bend |
English PDF |
| GB/T 29168.1-2021 |
Petroleum and natural gas industries—Induction Bends, fittings and flanges for pipeline transportation systems—Part 1: Induction bends 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第1部分：感应加热弯管 |
China National Standards Bend |
English PDF |
| GB/T 15970.10-2021 |
Corrosion of metals and alloys—Stress corrosion testing—Part l0: Reverse U-Bend method 金属和合金的腐蚀 应力腐蚀试验 第10部分：反向U型弯曲试验方法 |
China National Standards Bend |
English PDF |
| GB/T 15972.47-2021 |
Specifications for optical fibre test method - Part 47: Measurement methods and test procedures for transmission characteristics - MacroBending loss 光纤试验方法规范 第47部分：传输特性的测量方法和试验程序 宏弯损耗 |
China National Standards Bend |
English PDF |
| GB/T 14230-2021 |
Test method of tooth Bending strength for gear load capacity 齿轮弯曲疲劳强度试验方法 |
China National Standards Bend |
English PDF |
| GB/T 3480.3-2021 |
Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth Bending strength 直齿轮和斜齿轮承载能力计算 第3部分：轮齿弯曲强度计算 |
China National Standards Bend |
English PDF |
| GB/T 39826-2021 |
Fine ceramics—Determining flexural bond strength—Four-point Bending method 精细陶瓷 界面弯曲强度测定 四点弯曲法 |
China National Standards Bend |
English PDF |
| GB/T 22565.1-2021 |
Metallic materials -- Sheet and strip -- Method for spring back evaluation -- Part 1: Stretch Bending 金属材料 薄板和薄带 回弹性能评估方法 第1部分：拉弯法 |
China National Standards Bend |
English PDF |
| GB/T 1927.17-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact Bending strength 无疵小试样木材物理力学性质试验方法 第17部分：冲击韧性测定 |
China National Standards Bend |
English PDF |
| GB/T 1927.10-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 10: Determination of modulus of elasticity in Bending 无疵小试样木材物理力学性质试验方法 第10部分：抗弯弹性模量测定 |
China National Standards Bend |
English PDF |
| GB/T 1927.9-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 9: Determination of Bending strength 无疵小试样木材物理力学性质试验方法 第9部分：抗弯强度测定 |
China National Standards Bend |
English PDF |
| GB/T 18426-2021 |
Rubber-or plastics-coated fabrics—Low-temperature Bend test 橡胶或塑料涂覆织物 低温弯曲试验 |
China National Standards Bend |
English PDF |
| GB/T 39152-2020 |
Test method of the Bending stress relaxation for copper and copper alloy 铜及铜合金弯曲应力松弛试验方法 |
China National Standards Bend |
English PDF |
| GB/T 38978-2020 |
Refractory products—Determination of stress-strain (three-point Bending method） 耐火材料 应力应变试验方法(三点弯曲法) |
China National Standards Bend |
English PDF |
| GB/T 39542.3-2020 |
Mechanical pencils for technical drawings—Part 3: Black leads—Bending strengths of HB leads 技术制图活动铅笔 第3部分：黑铅芯 HB铅芯弯曲强度 |
China National Standards Bend |
English PDF |
| GB/T 38806-2020 |
Metallic materials—Sheet and strip—Test method for Bending and folding properties 金属材料 薄板和薄带 弯折性能试验方法 |
China National Standards Bend |
English PDF |
| GB/T 244-2020 |
Metallic material—Tube—Bend test method 金属材料 管 弯曲试验方法 |
China National Standards Bend |
English PDF |
| GB/T 38686-2020 |
Test method for flexibility of ultrathin glass—Two point Bending method 超薄玻璃柔韧性试验方法 两点弯曲法 |
China National Standards Bend |
English PDF |
| GB/T 39374-2020 |
Leather—Physical and mechanical tests—Determination of Bending force 皮革 物理和机械试验 弯折力的测定 |
China National Standards Bend |
English PDF |
| GB/T 21296.4-2020 |
Automatic instruments for weighing road vehicles in motion─Part 4：Bending plate type 动态公路车辆自动衡器 第4部分：弯板式 |
China National Standards Bend |
English PDF |
| GB/T 37363.4-2020 |
Determination of biocides content of coating materials—Part 4: Determination of carBendazim content 涂料中生物杀伤剂含量的测定 第4部分：多菌灵含量的测定 |
China National Standards Bend |
English PDF |
| GB/T 37781-2019 |
Test methods for Bending strength of glass 玻璃材料弯曲强度试验方法 |
China National Standards Bend |
English PDF |
| GB/T 37587-2019 |
Technical specification for corrosion resistance of buried steel Bend pipe polyethylene anti-corrosion tapes 埋地钢质弯管聚乙烯防腐带耐蚀作业技术规范 |
China National Standards Bend |
English PDF |
| GB/T 22364-2018 |
Paper and board—Determination of Bending resistance 纸和纸板-弯曲挺度的测定 |
China National Standards Bend |
English PDF |
| GB/T 35067-2018 |
Corrosion resistant alloy bimetal Bends for petroleum and natural gas industries 石油天然气工业用耐腐蚀合金复合弯管 |
China National Standards Bend |
English PDF |
| GB/T 17737.314-2018 |
Coaxial communication cables—Part 1-314: Mechanical test methods—Test for cable Bending 同轴通信电缆 第1-314部分：机械试验方法 电缆的弯曲试验 |
China National Standards Bend |
English PDF |
| GB/T 34375-2017 |
Reliability assessment method of NC ship plate Bending machine 数控船用卷板机可靠性评定方法 |
China National Standards Bend |
English PDF |
| GB/T 34171-2017 |
Test method for flexural property of thin and ultrathin glass—Three-point Bending method 薄与超薄玻璃弯曲性能试验方法 三点弯曲法 |
China National Standards Bend |
English PDF |
| GB/T 5565.2-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 |
China National Standards Bend |
English PDF |
| GB/T 5565.3-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 |
China National Standards Bend |
English PDF |
| GB/T 5565.1-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 |
China National Standards Bend |
English PDF |
| GB/T 33621-2017 |
Test method for Bending properties of 3D braided fabric and its polymer matrix composites 三维编织物及其树脂基复合材料弯曲性能试验方法 |
China National Standards Bend |
English PDF |
| GB/T 18318.6-2017 |
Textiles—Determination of Bending behavior—Part 6: Saddle method 纺织品 弯曲性能的测定 第6部分：马鞍法 |
China National Standards Bend |
English PDF |
| GB/T 33001-2016 |
Thermal insulating products for building applications—Determination of Bending behaviour 建筑用绝热制品 弯曲性能的测定 |
China National Standards Bend |
English PDF |
| GB/T 33099-2016 |
Test methods of stiffness for dipped reinforcing material—Three-point Bending 浸胶骨架材料硬挺度的测定 三点弯曲法 |
China National Standards Bend |
English PDF |
| GB/T 33021-2016 |
Analytical method for organic wood preservatives —Triazoles and carBendazim 有机型木材防腐剂分析方法 三唑及苯并咪唑类 |
China National Standards Bend |
English PDF |
| GB/T 32976-2016 |
Metallic materials—Tubes—Transverse Bending test 金属材料 管 横向弯曲试验方法 |
China National Standards Bend |
English PDF |
| GB/T 10501-2016 |
CarBendazim technical material 多菌灵原药 |
China National Standards Bend |
English PDF |
| GB 23200.87-2016 |
National food safety standard—Determination of thiaBendazole residue in milk and milk products - Fluorescence spectrophotometry 食品安全国家标准 乳及乳制品中噻菌灵残留量的测定 荧光分光光度法 |
China National Standards Bend |
English PDF |
| GB 23200.76-2016 |
National food safety standards—Determination of fluBendiamide residue in foods - Liquid chromatography-mass spectrometry 食品安全国家标准 食品中氟苯虫酰胺残留量的测定 液相色谱-质谱/质谱法 |
China National Standards Bend |
English PDF |
| GB 23200.17-2016 |
National food safety standards—Determination of thiaBendazole residue in fruits and vegetables Liquid chromatography 食品安全国家标准 水果和蔬菜中噻菌灵残留量的测定 液相色谱法 |
China National Standards Bend |
English PDF |
| GB/T 32378-2015 |
Glass-reinforced thermosetting plastics (GRP) pipes—Determination of the long-term ultimate Bending strain and the long-term ultimate relative ring deflection under wet conditions 玻璃纤维增强热固性塑料（GRP）管 湿态环境下长期极限弯曲应变和长期极限相对环变形的测定 |
China National Standards Bend |
English PDF |
| GB/T 31967.2-2015 |
Test method for physical property of rare earth permanent magnetic materials—Part 2：Determination of Bending strength and fracture toughness 稀土永磁材料物理性能测试方法 第2部分：抗弯强度和断裂韧度的测定 |
China National Standards Bend |
English PDF |
| GB/T 4337-2015 |
Metallic materials—Fatigue testing—Rotating bar Bending method 金属材料 疲劳试验 旋转弯曲方法 |
China National Standards Bend |
English PDF |
| GB/T 17737.201-2015 |
Coaxial communication cables—Part 1-201: Environmental test methods—Test for cold Bend performance of cable 同轴通信电缆 第1-201部分：环境试验方法 电缆的冷弯性能试验 |
China National Standards Bend |
English PDF |
| GB/T 30791-2014 |
Paints and varnishes―T-Bend test 色漆和清漆 T弯试验 |
China National Standards Bend |
English PDF |
| GB/T 30463-2013 |
NC Plate Bending machine 数控卷板机 |
China National Standards Bend |
English PDF |
| GB 30458-2013 |
Safety requirement of plate Bending machine 卷板机 安全技术要求 |
China National Standards Bend |
English PDF |
| GB 29687-2013 |
National Food Safety Standard-Determination of alBendazole and its metabolites in aquatic products by high performance liquid chromatography 食品安全国家标准 水产品中阿苯达唑及其代谢物多残留的测定 高效液相色谱法 |
China National Standards Bend |
English PDF |
| GB/T 238-2013 |
Metallic materials - Wire - Reverse Bend test 金属材料 线材 反复弯曲试验方法 |
China National Standards Bend |
English PDF |
| GB/T 235-2013 |
Metallic materials - Sheet and strip - Reverse Bend test 金属材料 薄板和薄带 反复弯曲试验方法 |
China National Standards Bend |
English PDF |
| GB/T 29168.3-2012 |
Petroleum and natural gas industries - Induction Bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第3部分：法兰 |
China National Standards Bend |
English PDF |
| GB/T 29168.2-2012 |
Petroleum and natural gas industries - Induction Bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第2部分：管件 |
China National Standards Bend |
English PDF |
| GB/T 29168.1-2012 |
Petroleum and natural gas industries - Induction Bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends 石油天然气工业 管道输送系统用感应加热弯管、管件和法兰 第1部分：感应加热弯管 |
China National Standards Bend |
English PDF |
| GB 28760-2012 |
Tube Bending machine - Safety requirements 弯管机 安全技术要求 |
China National Standards Bend |
English PDF |
| GB/T 28763-2012 |
Numerically controlled tube Bending machine 数控弯管机 |
China National Standards Bend |
English PDF |
| GB/T 9771.7-2012 |
Single-mode optical fibres for telecommunication - Part 7: Characteristics of a Bending loss insensitive single-mode optical fibre for the access network 通信用单模光纤 第7部分：接入网用弯曲损耗不敏感单模光纤特性 |
China National Standards Bend |
English PDF |
| GB/T 232-2010 |
Metallic materials - Bend test 金属材料 弯曲试验方法 |
China National Standards Bend |
English PDF |
| GB/T 18318.5-2009 |
Textiles - Determination of Bending behaviour - Part 5: Pure bending method 纺织品 弯曲性能的测定 第5部分：纯弯曲法 |
China National Standards Bend |
English PDF |
| GB/T 18318.4-2009 |
Textiles - Determination of Bending behaviour - Part 4: Cantilever beam 纺织品 弯曲性能的测定 第4部分：悬臂法 |
China National Standards Bend |
English PDF |
| GB/T 18318.3-2009 |
Textiles - Determination of Bending behavior - Part 3: Gurley method 纺织品 弯曲性能的测定 第3部分：格莱法 |
China National Standards Bend |
English PDF |
| GB/T 18318.2-2009 |
Textiles - Determination of Bending behaviour - Part 2: Heart loop method 纺织品 弯曲性能的测定 第2部分：心形法 |
China National Standards Bend |
English PDF |
| GB/T 18318.1-2009 |
Textiles - Determination of Bending behavior - Part 1: Incline method 纺织品 弯曲性能的测定 第1部分：斜面法 |
China National Standards Bend |
English PDF |
| GB/T 11185-2009 |
Paints and varnishes - Bend test(conical mandrel) 色漆和清漆 弯曲试验(锥形轴) |
China National Standards Bend |
English PDF |
| GB/T 23380-2009 |
Determination of carBendazim residues in fruits and vegetables - HPLC method 水果、蔬菜中多菌灵残留的测定 高效液相色谱法 |
China National Standards Bend |
English PDF |
| GB/T 4909.6-2009 |
Test methods for bare wires - Part 6: Bend test - Single bend test 裸电线试验方法 第6部分：弯曲试验 单向弯曲 |
China National Standards Bend |
English PDF |
| GB/T 4909.5-2009 |
Test methods for bare wires - Part 5: Bend test - Reverse bend test 裸电线试验方法 第5部分：弯曲试验 反复弯曲 |
China National Standards Bend |
English PDF |
| GB/T 1936.2-2009 |
Method for determination of the modulus of elasticity in static Bending of wood 木材抗弯弹性模量测定方法 |
China National Standards Bend |
English PDF |
| GB/T 1936.1-2009 |
Method of testing in Bending strength of wood 木材抗弯强度试验方法 |
China National Standards Bend |
English PDF |
| GB/T 22972-2008 |
Determination of thiaBendazole, albendazole, fenbendazole, oxfendazole and febantel residues in milk and milk powder - HPLC-MS-MS method 牛奶和奶粉中噻苯达唑、阿苯达唑、芬苯达唑、奥芬达唑、苯硫氨酯残留量的测定 液相色谱-串联质谱法 |
China National Standards Bend |
English PDF |
| GB/T 23144-2008 |
Paper and board - Determination of Bending stiffness by static methods - General principle 纸和纸板 静态弯曲挺度的测定 通用原理 |
China National Standards Bend |
English PDF |
| GB/T 22906.6-2008 |
Test of cores - Part 6: Determination of Bending strength by three-point method 纸芯的测定 第6部分：弯曲强度的测定（三点法） |
China National Standards Bend |
English PDF |
| GB/T 15825.5-2008 |
Sheet metal formability and test methods - Part 5: Bending test 金属薄板成形性能与试验方法 第5部分：弯曲试验 |
China National Standards Bend |
English PDF |
| GB/T 22565-2008 |
Metallic materials - Sheet and strip - Method for springback evaluation in stretch Bending 金属材料 薄板和薄带 拉弯回弹评估方法 |
China National Standards Bend |
English PDF |
| GB/T 22364-2008 |
Paper and board - Determination of resistance to Bending 纸和纸板弯曲挺度的测定 |
China National Standards Bend |
English PDF |
| GB/T 22363-2008 |
Paper and board - Determination of roughness (air leak methods) - Bendtsen method and print-surf method 纸和纸板粗糙度的测定(空气泄漏法） 本特生法和印刷表面法 |
China National Standards Bend |
English PDF |
| GB/T 12347-2008 |
Steel wire ropes - Bending fatigue testing 钢丝绳弯曲疲劳试验方法 |
China National Standards Bend |
English PDF |
| GB/T 4337-2008 |
Metallic materials - Fatigue testing - Rotating bar Bending method 金属材料 疲劳试验 旋转弯曲方法 |
China National Standards Bend |
English PDF |
| GB/T 244-2008 |
Metallic materials-Tube - Bend test 金属管 弯曲试验方法 |
China National Standards Bend |
English PDF |
| GB/T 15972.47-2008 |
Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - MacroBending loss 光纤试验方法规范 第47部分：传输特性和光学特性的测量方法和试验程序 宏弯损耗 |
China National Standards Bend |
English PDF |
| GB/T 2653-2008 |
Bend test methods on welded joints 焊接接头弯曲试验方法 |
China National Standards Bend |
English PDF |
| GB/T 21472-2008 |
Stainless steel Bends and tees for the food industry 食品工业用不锈钢弯头和三通 |
China National Standards Bend |
English PDF |
| GB/T 8812.1-2007 |
Rigid cellular plastics - Determination of flexural properties - Part 1: Basic Bending test 硬质泡沫塑料 弯曲性能的测定 第1部分：基本弯曲试验 |
China National Standards Bend |
English PDF |
| GB/T 6742-2007 |
Paints and varnishes - Bend test (cylindrical mandrel) 色漆和清漆 弯曲试验(圆柱轴) |
China National Standards Bend |
English PDF |
| GB/T 13665-2007 |
Test method for damping capacity of metallic damping materials - Torsion pendulum method and Bending vibration 金属阻尼材料阻尼本领试验方法 扭摆法和弯曲振动法 |
China National Standards Bend |
English PDF |
| GB/T 5565-2006 |
Rubber or plastics hoses tubing - Bending tests 橡胶或塑料增强软管和非增强软管 弯曲试验 |
China National Standards Bend |
English PDF |
| GB/T 10700-2006 |
Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method 精细陶瓷弹性模量试验方法 弯曲法 |
China National Standards Bend |
English PDF |
| GB/T 5009.188-2003 |
Determination of thiophanate-methyl，carBendazim in vegetables and fruits 蔬菜、水果中甲基托布津、多菌灵的测定 |
China National Standards Bend |
English PDF |
| GB/T 18426-2001 |
Rubber or plastics-coated fabrics--Low-temperature Bend test 橡胶或塑料涂覆织物 低温弯曲试验 |
China National Standards Bend |
English PDF |
| GB 10501-2000 |
CarBendazim technical 多菌灵原药 |
China National Standards Bend |
English PDF |
| GB/T 4741-1999 |
Standard test method for Bending strength of ceramic materials 陶瓷材料抗弯曲强度试验方法 |
China National Standards Bend |
English PDF |
| GB/T 1965-1996 |
Test method for cross-Bending strength of porous ceramic 多孔陶瓷弯曲强度试验方法 |
China National Standards Bend |
English PDF |
| GB/T 2833-1996 |
Test method for cross-Bending strength of vitrified pipe 陶管弯曲强度试验方法 |
China National Standards Bend |
English PDF |
| GB/T 15970.3-1995 |
Corrosion of metals and alloys--Stress corrosion testing--Part 3:Preparation and use of U-Bend specimens 金属和合金的腐蚀 应力腐蚀试验 第3部分:U型弯曲试样的制备和应用 |
China National Standards Bend |
English PDF |
| GB/T 14235.2-1993 |
Testing method for Bending strength of pattern materials in investment casting 熔模铸造模料 抗弯强度测定方法 |
China National Standards Bend |
English PDF |
| GB/T 14230-1993 |
Standard of test method for Bending load capacity of gears 齿轮弯曲疲劳强度试验方法 |
China National Standards Bend |
English PDF |
| Find out:112Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
