China National Standards

China Blast GB Standards List


  •  China "Blast" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 24189-2024 Iron ore for Blast furnaces - Determination of reducibility expressed as the final reduction index {译}
    高炉用铁矿石-用最终还原度指数表示的还原性的测定
    China National Standards
    Blast

    English PDF
    GB/T 27692-2024 Iron pellets for Blast furnaces {译}
    高炉用铁球团矿
    China National Standards
    Blast

    English PDF
    GB/T 30163-2023 Technical Specifications for Energy Saving of High Air Temperature Top-Fired Hot Air Stoves for Blast Furnaces {译}
    高炉用高风温顶燃式热风炉节能技术规范
    China National Standards
    Blast

    English PDF
    GB/T 10322.6-2022 Determination of hot cracking index of iron ore for Blast furnace charge {译}
    高炉炉料用铁矿石 热裂指数的测定
    China National Standards
    Blast

    English PDF
    GB/T 18512-2022 Commercial Coal Quality Blast Furnace Injection Coal {译}
    商品煤质量 高炉喷吹用煤
    China National Standards
    Blast

    English PDF
    GB/T 17850.9-2021 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic Blast-cleaning abrasives—Part 9: Staurolite
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第9部分:十字石
    China National Standards
    Blast

    English PDF
    GB/T 40497-2021 Evaluation principles for the design of offshore facilities against fire and Blast loading
    海上设施防火与防爆设计评估原则
    China National Standards
    Blast

    English PDF
    GB/T 25217.11-2019 Methods for test, monitoring and prevention of rock burst—Part 11: Prevention method of destress Blasting in coal seam
    冲击地压测定、监测与防治方法 第11部分:煤层卸压爆破防治方法
    China National Standards
    Blast

    English PDF
    GB/T 13240-2018 Iron ore pellets for Blast furnace feedstocks—Determination of the free-swelling index
    高炉用铁球团矿 自由膨胀指数的测定
    China National Standards
    Blast

    English PDF
    GB/T 14201-2018 Iron ore pellets for Blast furnace and direct reduction feedstocks—Determination of the crushing strength
    高炉和直接还原用铁球团矿 抗压强度的测定
    China National Standards
    Blast

    English PDF
    GB/T 34568-2017 Iron ores for Blast furnace and direct reduction feedstocks-Determination of bulk density
    高炉和直接还原用铁矿石 体积密度的测定
    China National Standards
    Blast

    English PDF
    GB/T 34193-2017 Guides for energy efficiency assessment of Blast furnace process
    高炉工序能效评估导则
    China National Standards
    Blast

    English PDF
    GB/T 33969-2017 Technical specification for injecting pulverized coal with oxygen-enriched into Blast furnace
    高炉富氧喷煤技术规范
    China National Standards
    Blast

    English PDF
    GB/T 10598.1-2017 Open-cut mine rotary Blast hole drill—Part 1:Common technology
    露天矿用牙轮钻机和旋转钻机 第1部分:通用技术
    China National Standards
    Blast

    English PDF
    GB/T 10598.2-2017 Open-cut mine rotary Blast hole drill—Part 2:Industrial test method
    露天矿用牙轮钻机和旋转钻机 第2部分:工业试验方法
    China National Standards
    Blast

    English PDF
    GB/T 33759-2017 The technical specification for recycling and utilization of dry Blast furnace dust in iron and steel industry
    高炉干法除尘灰回收利用技术规范
    China National Standards
    Blast

    English PDF
    GB/T 18046-2017 Ground granulated Blast furnace slag used for cement,mortar and concrete
    用于水泥、砂浆和混凝土中的粒化高炉矿渣粉
    China National Standards
    Blast

    English PDF
    GB/T 17850.4-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic Blast-cleaning abrasives—Part 4:Coal furnace slag
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣
    China National Standards
    Blast

    English PDF
    GB/T 17850.1-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic Blast-cleaning abrasives—Part1:General introduction and classification
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第1部分:导则和分类
    China National Standards
    Blast

    English PDF
    GB/T 18838.2-2017 Preparation of steel substrates before application of paints and related products—Specifications for metallic Blast-cleaning abrasives—Part 2: Chilled-iron grit
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁砂
    China National Standards
    Blast

    English PDF
    GB/T 17850.5-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic Blast-cleaning abrasives—Part 5:Nickel refinery slag
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第5部分:镍精炼渣
    China National Standards
    Blast

    English PDF
    GB/T 17850.7-2017 Preparation of steel substrates before application of paints and related products—Specifications for non-metallic Blast-cleaning abrasives—Part 7: Fused aluminium oxide
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝
    China National Standards
    Blast

    English PDF
    GB/T 32567-2016 Blast wheel
    抛丸器
    China National Standards
    Blast

    English PDF
    GB/T 32287-2015 Methods of determination and calculation of heat balance for hot Blast stove in blast furnace
    高炉热风炉热平衡测定与计算方法
    China National Standards
    Blast

    English PDF
    GB 8031-2015 Industrial electric Blasting cap
    工业电雷管
    China National Standards
    Blast

    English PDF
    GB/T 31923.2-2015 Iron ores for Blast furnace feedstocks—Determinaction of low-temperature reduction-disintegration indices by static method—Part 2: Reduction with CO and N2
    高炉炉料用铁矿石 低温还原粉化静态试验 第2部分:与CO和N2的反应
    China National Standards
    Blast

    English PDF
    GB/T 31923.1-2015 Iron ores for Blast furnace feedstocks—Determination of low-temperature reduction-disintegration indices by static method—Part 1: Reduction with CO、CO2、H2 and N2
    高炉炉料用铁矿石 低温还原粉化静态试验 第1部分:与CO、CO2、H2和N2的反应
    China National Standards
    Blast

    English PDF
    GB/T 18838.5-2015 Preparation of steel substrates before application of paints and related products—Specifications for metallic Blast-cleaning abrasives—Part 5: Steel cut wire shot
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分:钢丝切丸
    China National Standards
    Blast

    English PDF
    GB 50427-2015 Code for design of Blast furnace ironmaking plant
    高炉炼铁工程设计规范
    China National Standards
    Blast

    English PDF
    GB/T 31553-2015 External combustion hot Blast cupola
    外热风冲天炉
    China National Standards
    Blast

    English PDF
    GB 6722-2014 Safety regulations for Blasting
    爆破安全规程
    China National Standards
    Blast

    English PDF
    GB/T 30163-2013 Specifications of top combustion stove with high efficiency and high Blast temperature for blast furnace
    高炉用高风温顶燃式热风炉节能技术规范
    China National Standards
    Blast

    English PDF
    GB/T 29908-2013 Classification and test method of air-Blast resistance performance for curtain walls,windows and doors
    玻璃幕墙和门窗抗爆炸冲击波性能分级及检测方法
    China National Standards
    Blast

    English PDF
    GB 50907-2013 Code for design of Blast resistant chamber structures
    抗爆间室结构设计规范
    China National Standards
    Blast

    English PDF
    GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of Blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法
    China National Standards
    Blast

    English PDF
    GB 50862-2013 Standard method of measurement for Blasting works
    爆破工程工程量计算规范
    China National Standards
    Blast

    English PDF
    GB 50779-2012 Code for design of Blast resistant control building in petrochemical industry
    石油化工控制室抗爆设计规范
    China National Standards
    Blast

    English PDF
    GB 50201-2012 Code for construction and acceptance of earthwork and Blasting engineering
    土方与爆破工程施工及验收规范
    China National Standards
    Blast

    English PDF
    GB/T 27975-2011 Methods for chemical analysis of granulated Blastfurnace slag
    粒化高炉矿渣的化学分析方法
    China National Standards
    Blast

    English PDF
    GB/T 27692-2011 Acidity iron pellet for Blast furnace
    高炉用酸性铁球团矿
    China National Standards
    Blast

    English PDF
    GB/T 17850.6-2011 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic Blast-cleaning abrasives - Part 6: Iron furnace slag
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣
    China National Standards
    Blast

    English PDF
    GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of Blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法
    China National Standards
    Blast

    English PDF
    GB/T 17850.11-2011 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic Blast-cleaning abrasives - Part 11: Special type grit of steel slag
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第11部分:钢渣特种型砂
    China National Standards
    Blast

    English PDF
    GB/T 26137-2010 Thermodynamic performance testing for Blast furnace gas energy recovery turbo-expander
    高炉煤气能量回收透平膨胀机热力性能试验
    China National Standards
    Blast

    English PDF
    GB 26448-2010 Transport of dangerous goods - Test methods and criteria relating to the sensitivity of ammonium nitrate emulsions, suspension or gels, intermediate for Blasting explosives(ANE)
    危险货物运输 炸药中间体(ANE)的敏感性试验方法和判据
    China National Standards
    Blast

    English PDF
    GB 50607-2010 Design regulations of pulverized coal injection for Blast furnace
    高炉喷吹煤粉工程设计规范
    China National Standards
    Blast

    English PDF
    GB/T 24531-2009 Iron ores for Blast furnace and direct reduction feedstocks - Determination of the tumble and abrasion indices
    高炉和直接还原用铁矿石 转鼓和耐磨指数的测定
    China National Standards
    Blast

    English PDF
    GB/T 24530-2009 Iron ores for Blast furnace feedstocks - Determination of reduction under load
    高炉用铁矿石 荷重还原性的测定
    China National Standards
    Blast

    English PDF
    GB/T 24515-2009 Iron ores for Blast furnace feedstocks - Determination of the reducibility by the rate of reduction index
    高炉用铁矿石 用还原速率表示的还原性的测定
    China National Standards
    Blast

    English PDF
    GB 24390-2009 Shot(air)Blast equipment - Safety requirements
    抛(喷)丸设备 安全要求
    China National Standards
    Blast

    English PDF
    GB/T 24204-2009 Iron ores for Blast furnace feedstocks - Determination of low-temperature reduction-disintegration indices by dynamic method
    高炉炉料用铁矿石 低温还原粉化率的测定 动态试验法
    China National Standards
    Blast

    English PDF
    GB/T 24201-2009 Test method for corrosion resistance of Blast furnace brick to pig iron
    高炉炭块抗铁水熔蚀性试验方法
    China National Standards
    Blast

    English PDF
    GB/T 24189-2009 Iron ores for Blast furnace feedstocks - Determination of the reducibility by the final degree of reduction index
    高炉用铁矿石 用最终还原度指数表示的还原性的测定
    China National Standards
    Blast

    English PDF
    GB/T 23576-2009 Abrasive Blasting equipment - General technical requirements
    抛喷丸设备 通用技术条件
    China National Standards
    Blast

    English PDF
    GB/T 15790-2009 Rules of investigation and forecast of the rice Blast[Pyricularia oryzae(Cavara)]
    稻瘟病测报调查规范
    China National Standards
    Blast

    English PDF
    GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of Blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分:表面粗糙度的测定方法 复制带法
    China National Standards
    Blast

    English PDF
    GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of Blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分:ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法
    China National Standards
    Blast

    English PDF
    GB/T 22584-2008 General technical specification for the Blasting-smoke purifying equipment for mine
    矿用炮烟净化装置通用技术条件
    China National Standards
    Blast

    English PDF
    GB/T 13343-2008 Blast hole tricone rock bits
    矿用三牙轮钻头
    China National Standards
    Blast

    English PDF
    GB/T 203-2008 Granulated Blastfurnace slag used for cement production
    用于水泥中的粒化高炉矿渣
    China National Standards
    Blast

    English PDF
    GB 16543-2008 Safety regulations for explosion prevention and protection on bituminous coal injection system into Blast furnace
    高炉喷吹烟煤系统防爆安全规程
    China National Standards
    Blast

    English PDF
    GB/T 18838.4-2008 Preparation of steel substrates before application of paints and related products-Specifications for metallic Blast-cleaning abrasives - Part 4:Low-carbon cast-steel shot
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第4部分: 低碳铸钢丸
    China National Standards
    Blast

    English PDF
    GB/T 18838.3-2008 Preparation of steel substrates before application of paints and related products-Specifications for metallic Blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第3部分: 高碳铸钢丸和砂
    China National Standards
    Blast

    English PDF
    GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of Blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl
    涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义
    China National Standards
    Blast

    English PDF
    GB/T 6060.3-2008 Surface roughness comparison specimen - Part 3:Spark-eroded,shot-Blasted,grit-blasted,lapped,filed and polished surface
    表面粗糙度比较样块 第3部分:电火花、抛(喷)丸、喷砂、研磨、锉、抛光加工表面
    China National Standards
    Blast

    English PDF
    GB/T 18046-2008 Ground granulated Blast furnace slag used for cement and concrete
    用于水泥和混凝土中的粒化高炉矿渣粉
    China National Standards
    Blast

    English PDF
    GB 21009-2007 Mine Blast-hole drills - Safety requirements
    矿用炮孔钻机 安全要求
    China National Standards
    Blast

    English PDF
    GB/T 10598.2-2005 Industrial test method of open-cut mine rotary Blast hole drill
    露天矿用牙轮钻机和旋转钻机 工业试验方法
    China National Standards
    Blast

    English PDF
    GB/T 10598.1-2005 Open-cut mine rotary Blast hole drill
    露天矿用牙轮钻机和旋转钻机
    China National Standards
    Blast

    English PDF
    GB/T 19816.7-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic Blast-cleaning abrasives-Part 7:Determination of moisture
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定
    China National Standards
    Blast

    English PDF
    GB/T 19816.6-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic Blast-cleaning abrasives-Part 6:Determination of foreign matter
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定
    China National Standards
    Blast

    English PDF
    GB/T 19816.5-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic Blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定
    China National Standards
    Blast

    English PDF
    GB/T 19816.4-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic Blast-cleaning abrasives-Part 4:Determination of apparent density
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定
    China National Standards
    Blast

    English PDF
    GB/T 19816.3-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic Blast-cleaning abrasives-Part 3:Determination of hardness
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定
    China National Standards
    Blast

    English PDF
    GB/T 19816.2-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic Blast-cleaning abrasives-Part 2:Determination of particle size distribution
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
    China National Standards
    Blast

    English PDF
    GB/T 19816.1-2005 Preparation of steel substrates before application of paints and related products-Test methods for metallic Blast-cleaning abrasives-Part 1:Sampling
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样
    China National Standards
    Blast

    English PDF
    GB/T 18839.2-2002 Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive Blast-cleaning
    涂覆涂料前钢材表面处理 表面处理方法 磨料喷射清理
    China National Standards
    Blast

    English PDF
    GB/T 18838.1-2002 Preparation of steel substrates before application of paints and related products--Specifications for metallic Blast-cleaning abrasives--General introduction and classification
    涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 导则和分类
    China National Standards
    Blast

    English PDF
    GB/T 17850.1-2002 Preparation of steel substrates before application of paints and related products--Specifications for non-metallic Blast-cleaning abrasives--General introductionand classification
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 导则和分类
    China National Standards
    Blast

    English PDF
    GB/T 17850.3-1999 Preparation of steel substrates before application of paints and related products--Specifications for non-metallic Blast-cleaning abrasives--Copper refinery slag
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 铜精炼渣
    China National Standards
    Blast

    English PDF
    GB/T 17849-1999 Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic Blast-cleaning abrasives
    涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法
    China National Standards
    Blast

    English PDF
    GB/T 16625-1996 Seismograph electric Blasting cap
    地震勘探电雷管
    China National Standards
    Blast

    English PDF
    GB 16391-1996 Diagnostic criteria and principles of management for combined radiation-Blast injury
    放冲复合伤诊断标准及处理原则
    China National Standards
    Blast

    English PDF
    GB 12950-1991 Safety regulations for seismic exploration Blasting practices
    地震勘探爆炸安全规程
    China National Standards
    Blast

    English PDF
    GB 11657-1989 Health protection zone standardfor copper smeltery (closed Blast furnace type)
    铜冶炼厂(密闭鼓风炉型)卫生防护距离标准
    China National Standards
    Blast

    English PDF

    Find out:85Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards