Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 40516-2021 |
Metal valves for use in marine J-flanged pipe face-to-face and Centre-to-face dimensions J类船用法兰连接金属阀门的结构长度 |
China National Standards Centre |
 English PDF |
| GB/T 40509-2021 |
Test method of transition test for the quantification of vehicle on-Centre handling 汽车转向中心区操纵性过渡特性试验方法 |
China National Standards Centre |
English PDF |
| GB/T 18400.10-2021 |
Test conditions for machining Centres—Part 10：Evaluation of thermal distortions 加工中心检验条件 第10部分：热变形的评定 |
China National Standards Centre |
English PDF |
| GB/T 38428.2-2021 |
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data Centres and telecom central offices—Part 2: Plug and socket-outlet system for 5.2 kW 数据中心和电信中心机房安装的信息和通信技术（ICT）设备用直流插头插座 第2部分：5.2 kW插头插座系统 |
China National Standards Centre |
English PDF |
| GB/T 38428.1-2019 |
Direct current (DC) plugs and socket-outlets for information and communication technology (ICT) equipment installed in data Centres and telecom central offices—Part 1: General requirements 数据中心和电信中心机房安装的信息和通信技术（ICT）设备用直流插头插座 第1部分：通用要求 |
China National Standards Centre |
English PDF |
| GB/T 37245-2018 |
General technical requirements for Centre-axle trailer 中置轴挂车通用技术条件 |
China National Standards Centre |
English PDF |
| GB/T 18233.5-2018 |
Information technology—Generic cabling for customer premises—Part 5: Data Centres 信息技术-用户建筑群通用布缆-第5部分：数据中心 |
China National Standards Centre |
English PDF |
| GB/T 23567.3-2018 |
Reliability evaluation for numerical control machine tools—Part 3: Numerically controlled turning machines and turning Centres 数控机床可靠性评定 第3部分：数控车床与车削中心 |
China National Standards Centre |
English PDF |
| GB/T 23567.2-2018 |
Reliability evaluation for numerical control machine tools—Part 2: Machining Centres 数控机床可靠性评定 第2部分：加工中心 |
China National Standards Centre |
English PDF |
| GB/T 36112-2018 |
Specification for service site management of administrative service Centre 政务服务中心服务现场管理规范 |
China National Standards Centre |
English PDF |
| GB/T 36114-2018 |
Specifications for service items guideline of administrative service Centre 政务服务中心进驻事项服务指南编制规范 |
China National Standards Centre |
English PDF |
| GB/T 36113-2018 |
Specification for complaint-handling administrative service Centre 政务服务中心服务投诉处置规范 |
China National Standards Centre |
English PDF |
| GB/T 34633.3-2017 |
Plain bearings—Pedestal plain bearings—Part 3: Centre flange bearings 滑动轴承 壳体支撑滑动轴承 第3部分：居中法兰式滑动轴承 |
China National Standards Centre |
English PDF |
| GB/T 16462.3-2017 |
Test conditions for numerically controlled turning machines and turning Centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分：倒置立式机床几何精度检验 |
China National Standards Centre |
English PDF |
| GB/T 35780.2-2017 |
Customer contact service—Part 2: Requirements for clients using the services of customer contact Centres 顾客联络服务 第2部分：使用顾客联络中心服务的委托方要求 |
China National Standards Centre |
English PDF |
| GB/T 35780.1-2017 |
Customer contact service—Part 1: Requirements for customer contact Centres 顾客联络服务 第1部分：顾客联络中心要求 |
China National Standards Centre |
English PDF |
| GB/T 33165-2016 |
Quantitative analysis method of Centre segregation for high carbon wire rod 高碳钢盘条中心偏析定量分析方法 |
China National Standards Centre |
English PDF |
| GB/T 32619-2016 |
Specifications for information disclosure coding of government affairs service Centres 政务服务中心信息公开编码规范 |
China National Standards Centre |
English PDF |
| GB/T 32618-2016 |
Specifications for information disclosure business of government affairs service Centres 政务服务中心信息公开业务规范 |
China National Standards Centre |
English PDF |
| GB/T 32617-2016 |
Specifications for information disclosure data of government affairs service Centres 政务服务中心信息公开数据规范 |
China National Standards Centre |
English PDF |
| GB/T 6078-2016 |
Centre drills 中心钻 |
China National Standards Centre |
English PDF |
| GB/T 32170.2-2015 |
Guide to standardization of administrative service Centre—Part 2: Standard system 政务服务中心标准化工作指南 第2部分：标准体系 |
China National Standards Centre |
English PDF |
| GB/T 32170.1-2015 |
Guide to standardization of administrative service Centre—Part 1: Basic requirements 政务服务中心标准化工作指南 第1部分：基本要求 |
China National Standards Centre |
English PDF |
| GB/T 32169.4-2015 |
Specification for operation of administrative service Centre—Part 4: Requirements for counter service appraisal 政务服务中心运行规范 第4部分：窗口服务评价要求 |
China National Standards Centre |
English PDF |
| GB/T 32169.3-2015 |
Specification for operation of administrative service Centre— Part 3: Requirements for counter services 政务服务中心运行规范 第3部分：窗口服务提供要求 |
China National Standards Centre |
English PDF |
| GB/T 32169.2-2015 |
Specification for operation of administrative service Centre—Part 2: Requirements for stationing 政务服务中心运行规范 第2部分：进驻要求 |
China National Standards Centre |
English PDF |
| GB/T 32169.1-2015 |
Specification for operation of administrative service Centre—Part 1: Basic requirements 政务服务中心运行规范 第1部分：基本要求 |
China National Standards Centre |
English PDF |
| GB/T 31383-2015 |
Standard of setting-up and services of tourist Centre 旅游景区游客中心设置与服务规范 |
China National Standards Centre |
English PDF |
| GB/T 19797-2012 |
Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution 农业灌溉设备 中心支轴式和平移式喷灌机 水量分布均匀度的测定 |
China National Standards Centre |
English PDF |
| GB/T 28224-2011 |
Service of relief and protection Centre for minor vagrants 流浪未成年人救助保护机构服务 |
China National Standards Centre |
English PDF |
| GB/T 27769-2011 |
The facility and equipment requirements of social security service Centre 社会保障服务中心设施设备要求 |
China National Standards Centre |
English PDF |
| GB/T 22188.3-2010 |
Ergonomic design of control Centres - Part 3：Control room layout 控制中心的人类工效学设计 第3部分：控制室的布局 |
China National Standards Centre |
English PDF |
| GB/T 22188.2-2010 |
Ergonomic design of control Centres - Part 2：Principles for the arrangement of control suites 控制中心的人类工效学设计 第2部分：控制套室的布局原则 |
China National Standards Centre |
English PDF |
| GB/T 26354-2010 |
Standard of setting-up and services of tourist information Centre 旅游信息咨询中心设置与服务规范 |
China National Standards Centre |
English PDF |
| GB/T 25661.2-2010 |
Plano-machining Centres with traveling overhead cross rail - Part 2: Specifications 高架横梁移动龙门加工中心 第2部分：技术条件 |
China National Standards Centre |
English PDF |
| GB/T 25661.1-2010 |
Plano-machining Centres with traveling overhead cross rail - Part 1: Testing of the accuracy 高架横梁移动龙门加工中心 第1部分：精度检验 |
China National Standards Centre |
English PDF |
| GB 10395.19-2010 |
Agricultural and forestry machinery - Safety - Part 19：Centre pivot and moving lateral types irrigation machines 农林机械 安全 第19部分：中心支轴式和平移式喷灌机 |
China National Standards Centre |
English PDF |
| GB/T 18400.7-2010 |
Test conditions for machining Centres - Part 7: Accuracy of a finished test piece 加工中心检验条件 第7部分：精加工试件精度检验 |
China National Standards Centre |
English PDF |
| GB/T 18400.5-2010 |
Test conditions for machining Centres - Part 5: Accuracy and repeatability of positioning of work-holding pallets 加工中心检验条件 第5部分：工件夹持托板的定位精度和重复定位精度检验 |
China National Standards Centre |
English PDF |
| GB/T 18400.4-2010 |
Test conditions for machining Centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验 |
China National Standards Centre |
English PDF |
| GB/T 18400.2-2010 |
Test conditions for machining Centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) 加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴) |
China National Standards Centre |
English PDF |
| GB/T 18400.1-2010 |
Test conditions for machining Centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z -axis) 加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards Centre |
English PDF |
| GB/T 24547-2009 |
Mopeds - Measurement method for location of Centre of gravity 轻便摩托车重心位置的测量方法 |
China National Standards Centre |
English PDF |
| GB/T 24546-2009 |
Motorcycles - Measurement method for location of Centre of gravity 摩托车重心位置的测量方法 |
China National Standards Centre |
English PDF |
| GB/T 23700-2009 |
Ergonomics-Ergonomics of human-system interaction - Human-Centred lifecycle process descriptions 人-系统交互人类工效学 以人为中心的生命周期过程描述 |
China National Standards Centre |
English PDF |
| GB/T 16462.8-2009 |
Test conditions for numerically controlled turning machines and turning Centres - Part 8: Evaluation of thermal distortions 数控车床和车削中心检验条件 第8部分：热变形的评定 |
China National Standards Centre |
English PDF |
| GB/T 16462.7-2009 |
Test conditions for numerically controlled turning machines and turning Centres - Part 7: Evaluation of contouring performance in the coordinate planes 数控车床和车削中心检验条件 第7部分：在坐标平面内轮廓特性的评定 |
China National Standards Centre |
English PDF |
| GB 22998-2008 |
Safety of machine tools - Large numerically controlled turning machines and turning Centres 机床安全 大规格数控车床与车削中心 |
China National Standards Centre |
English PDF |
| GB 22997-2008 |
Safety of machine tools - Small numerically controlled turning machines and turning Centres 机床安全 小规格数控车床与车削中心 |
China National Standards Centre |
English PDF |
| GB/T 15531-2008 |
Belt drives - Pulleys - Limiting values for adjustment of Centres 带传动 带轮 中心距调整极限值 |
China National Standards Centre |
English PDF |
| GB/T 9204-2008 |
Dead Centre 固定顶尖 |
China National Standards Centre |
English PDF |
| GB/T 22188.1-2008 |
Ergonomics design of control Centres-Part 1: Principles for the design of control centres 控制中心的人类工效学设计 第1部分:控制中心的设计原则 |
China National Standards Centre |
English PDF |
| GB/Z 18620.3-2008 |
Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft Centre distance and parallelism of axes 圆柱齿轮 检验实施规范 第3部分: 齿轮坯、轴中心距和轴线平行度的检验 |
China National Standards Centre |
English PDF |
| GB/T 21051-2007 |
Ergonomics of human-system interaction - Usability methods supporting human-Centred design 人-系统交互工效学 支持以人为中心设计的可用性方法 |
China National Standards Centre |
English PDF |
| GB/T 4681-2007 |
External cylindrical Centreless grinding machines - Testing of the accuracy 无心外圆磨床 精度检验 |
China National Standards Centre |
English PDF |
| GB/T 20957.4-2007 |
Test conditions for precision machining Centres - Part 4：Accuracy and repeatability of positioning of linear and rotary axes 精密加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验 |
China National Standards Centre |
English PDF |
| GB/T 18400.9-2007 |
Test conditions for machining Centres - Part 9: Evaluation of the operating times of tool change and pallet change 加工中心检验条件 第9部分：刀具交换和托板交换操作时间的评定 |
China National Standards Centre |
English PDF |
| GB/T 16462.4-2007 |
Test conditions for numerically controlled turning machines and turning Centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验 |
China National Standards Centre |
English PDF |
| GB/T 4127.2-2007 |
Bonded abrasive products - Dimensions - Part 2: Grinding wheels for Centreless external cylindrical grinding 固结磨具 尺寸 第2部分：无心外圆磨砂轮 |
China National Standards Centre |
English PDF |
| GB/T 4127.1-2007 |
Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between Centres 固结磨具 尺寸 第1部分：外圆磨砂轮（工件装夹在顶尖间） |
China National Standards Centre |
English PDF |
| GB/T 20957.7-2007 |
Test conditions for precision machining Centres - Part 7: Accuracy of a finished test piece 精密加工中心检验条件 第7部分：精加工试件精度检验 |
China National Standards Centre |
English PDF |
| GB/T 20957.5-2007 |
Test conditions of precision machining Centres - Part 5: Tests for accuracy and repeatability of positioning of work-holding pallets 精密加工中心检验条件 第5部分：工件夹持托板的定位精度和重复定位精度检验 |
China National Standards Centre |
English PDF |
| GB/T 20957.2-2007 |
Test conditions for machining Centres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) 精密加工中心检验条件 第2部分：立式或带垂直主回转轴的万能主轴头机床 几何精度检验(垂直Z轴) |
China National Standards Centre |
English PDF |
| GB/T 20957.1-2007 |
Test conditions for precision machining Centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z axis) 精密加工中心检验条件 第1部分：卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards Centre |
English PDF |
| GB/T 13490-2006 |
V-belts - Uniformity of belts - Test method for determination of Centre distance variation V带 带的均匀性 测量中心距变化量的试验方法 |
China National Standards Centre |
English PDF |
| GB/T 3871.15-2006 |
Agricultural tractors - Test procedures - Part 15: Centre of gravity 农业拖拉机 试验规程 第15部分：质心 |
China National Standards Centre |
English PDF |
| GB/T 19935-2005 |
Worm gears-Geometry of worms-Name plates for worm gear units,Centre distances,information to be supplied to gear manufacturer by the purchaser 蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数 |
China National Standards Centre |
English PDF |
| GB/T 13829.4-2004 |
Grooved pins--Half-length Centre grooved 槽销 中部槽长为1/2全长 |
China National Standards Centre |
English PDF |
| GB/T 13829.3-2004 |
Grooved pins--One-third-length Centre grooved 槽销 中部槽长为1/3全长 |
China National Standards Centre |
English PDF |
| GB/T 12538-2003 |
Road vehicles with two axles--Determination of Centre of gravity 两轴道路车辆 重心位置的测定 |
China National Standards Centre |
English PDF |
| GB/T 18976-2003 |
Human-Centred design processes for interactive systems 以人为中心的交互系统设计过程 |
China National Standards Centre |
English PDF |
| GB 18568-2001 |
Machining Centres--Safeguarding specification 加工中心 安全防护技术条件 |
China National Standards Centre |
English PDF |
| GB/T 18400.8-2001 |
Test conditions for machining Centres--Part 8:Evaluation of the contouring performance in thethree coordinate planes 加工中心 检验条件 第8部分:三个坐标平面上轮廓特性的评定 |
China National Standards Centre |
English PDF |
| GB/T 18400.6-2001 |
Test conditionsfor machining Centres--Part 6:Accuracy of feeds，speeds and interpolations 加工中心 检验条件 第6部分:进给率、速度和插补精度检验 |
China National Standards Centre |
English PDF |
| GB/T 4459.5-1999 |
Mechanical drawings--Representation of Centre holes 机械制图 中心孔表示法 |
China National Standards Centre |
English PDF |
| GB/T 6078.4-1998 |
Centre drills--Part 4:Technical specifications 中心钻 第4部分:技术条件 |
China National Standards Centre |
English PDF |
| GB/T 6078.3-1998 |
Centre drills--Part 3:Centre drills for centre holes with radius form--Type R--Dimensions 中心钻 第3部分:弧形中心钻 R型 型式和尺寸 |
China National Standards Centre |
English PDF |
| GB/T 6078.2-1998 |
Centre drills--Part 2:Centre drills for centre holes with protecting chamfers--Type B--Dimensions 中心钻 第2部分:带护锥的中心钻 B型 型式和尺寸 |
China National Standards Centre |
English PDF |
| GB/T 6078.1-1998 |
Centre drills--Part 1:Centre drills for centre holes without protecting chamfers--Type A--Dimensions 中心钻 第1部分:不带护锥的中心钻 A型 型式和尺寸 |
China National Standards Centre |
English PDF |
| GB/T 16952-1997 |
General specification of satellite communication Centre station 卫星通信中央站通用技术条件 |
China National Standards Centre |
English PDF |
| GB 9670-1996 |
Hygienic standard for shopping Centre and book store 商场(店)、书店卫生标准 |
China National Standards Centre |
English PDF |
| GB/T 15396-1994 |
Dimensions for hexagonal and square crimping-die cavities， indentors， gauges，outer conductor crimp sleeves and Centre contact crimp barrels for r.f. cables and connectors 射频电缆和连接器用六角和正方形压模腔体、压头、标准规、外导体压接套和中心接触件压接导线筒的尺寸 |
China National Standards Centre |
English PDF |
| GB/T 14401-1993 |
Signalling between mobile station and base station and mobile services switching Centre in public land mobile communication network at 450MHz band 公用陆地移动通信网(450 MHz频段)中移动台-基站-移动电话交换局之间的信令 |
China National Standards Centre |
English PDF |
| GB/T 14236-1993 |
Specifications of equipement for video and pulse system of TV Centre 电视中心视频系统和脉冲系统设备技术要求 |
China National Standards Centre |
English PDF |
| GB/T 13497-1992 |
Codes of clearing Centre for countrywide inter-bank transaction 全国清算中心代码 |
China National Standards Centre |
English PDF |
| GB/T 9718-1988 |
Information processing--General purpose reels with 8mm Centre hole for magnetic tape for interchange instrumentation applications 信息处理 互换计测磁带用 8mm中心孔通用带盘 |
China National Standards Centre |
English PDF |
| GB/T 9714-1988 |
Information processing--General purpose hubs and reels with 76mm Centre hole for magnetic tape usedin interchange instrumentation applications 信息处理 互换计测磁带用的76mm中心孔通用带盘和盘芯 |
China National Standards Centre |
English PDF |
| GB/T 8499-1987 |
Earth-moving machinery--Method for locating the Centre of gravity 土方机械 测定重心位置的方法 |
China National Standards Centre |
English PDF |
| GB/T 3668.7-1983 |
Modular units for machine tool construction--Centre bases and columns--Dimensions 组合机床通用部件 中间底座和立柱尺寸 |
China National Standards Centre |
English PDF |
| GB/T 3668.3-1983 |
Modular units for machine tool construction--Rotary tables and multi-sided Centre bases for rotary tables--Dimensions 组合机床通用部件 回转工作台和回转工作台用多边形中间底座尺寸 |
China National Standards Centre |
English PDF |
| Find out:90Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
