Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/Z 29014.3-2024 |
Cut Cutting tool data expression and exchange - Part 3: Tool project reference dictionary {译} 切削刀具数据表达与交换-第3部分：刀具项目参考字典 |
China National Standards Cut |
 English PDF |
| GB/T 43905.2-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, Cutting and gouging {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分：电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定 |
China National Standards Cut |
English PDF |
| GB/T 43905.5-2024 |
Laboratory methods for sampling fumes and gases in welding and related processes - Part 5: Based on pyrolysis-gas chromatography-mass spectrometry Identification of thermal degradation products of organic materials in welding or Cutting by the method {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第5部分：基于热解-气相色谱-质谱法的焊接或切割中有机材料热降解物的识别 |
China National Standards Cut |
English PDF |
| GB/T 23897-2024 |
Post-harvest treatment of major Cut flower products Technical regulations for management {译} 主要切花产品采后处理技术规程 |
China National Standards Cut |
English PDF |
| GB/Z 29014.5-2024 |
Cutting tool data representation and exchange-Part 100: Reference dictionary Definitions, principles and methods of the Code {译} 切削刀具数据表达与交换-第5部分：装配项目参考字典 |
China National Standards Cut |
English PDF |
| GB/Z 29014.4-2024 |
Cutting tool data representation and exchange-Part 5: Reference dictionary for assembly items {译} 切削刀具数据表达与交换-第4部分：适应项目参考字典 |
China National Standards Cut |
English PDF |
| GB/Z 29014.2-2024 |
Cutting tool data representation and exchange-Part 4: Reference dictionary for adaptation items {译} 切削刀具数据表达与交换-第2部分：切削项目参考字典 |
China National Standards Cut |
English PDF |
| GB/T 20936.2-2024 |
Cutting tool data representation and exchange-Part 2: Reference dictionary for cutting items {译} 爆炸性环境用气体探测器-第2部分：可燃气体和氧气探测器的选型、安装、使用和维护 |
China National Standards Cut |
English PDF |
| GB/T 19518.1-2024 |
Cutting tool data representation and exchange-Part 1: Overview, basic principles and general information model {译} 爆炸性环境-电阻式伴热器-第1部分：通用和试验要求 |
China National Standards Cut |
English PDF |
| GB/T 30420.3-2023 |
Sewing Machinery Terminology Part 3: Spreading and Cutting Equipment Terminology {译} 缝制机械术语 第3部分: 铺布裁剪设备术语 |
China National Standards Cut |
English PDF |
| GB/T 4893.4-2023 |
Testing of physical and chemical properties of paint films on furniture surfaces Part 4: Adhesion cross-Cut determination method {译} 家具表面漆膜理化性能试验 第4部分：附着力交叉切割测定法 |
China National Standards Cut |
English PDF |
| GB/T 43450-2023 |
Chemicals ACute Eye Irritation In Vitro Cellular Test TRPV1 Activity Assay {译} 化学品 急性眼刺激体外细胞试验 TRPV1活性检测法 |
China National Standards Cut |
English PDF |
| GB/T 43325-2023 |
Foundry machinery - Cutting, grinding and finishing equipment for cleaning of castings - Technical safety regulations {译} 铸造机械 铸件清理用切割、磨削和精整设备 安全技术规范 |
China National Standards Cut |
English PDF |
| GB/T 14713-2023 |
General technical conditions for rotary Cutting machines {译} 旋切机通用技术条件 |
China National Standards Cut |
English PDF |
| GB 31652-2021 |
National Food Safety Standards Hygienic Specifications for the Production of Ready-to-Eat Fresh-Cut Fruits and Vegetables {译} 食品安全国家标准 即食鲜切果蔬生产卫生规范 |
China National Standards Cut |
English PDF |
| GB/T 1127-2023 |
Half round keyway milling Cutter {译} 半圆键槽铣刀 |
China National Standards Cut |
English PDF |
| GB/T 27683-2023 |
Copper and copper alloy Cutting chips and recycling specifications {译} 铜及铜合金切削屑料及其回收规范 |
China National Standards Cut |
English PDF |
| GB/T 42572-2023 |
Information Security Technology Trusted ExeCution Environment Service Specification {译} 信息安全技术 可信执行环境服务规范 |
China National Standards Cut |
English PDF |
| GB/T 18961-2023 |
Portable Brush Cutters and Lawn Mowers Vocabulary {译} 便携式割灌机和割草机 词汇 |
China National Standards Cut |
English PDF |
| GB/T 25680-2023 |
Printing Machinery Horizontal Flat Press Die Cutting Machine {译} 印刷机械 卧式平压模切机 |
China National Standards Cut |
English PDF |
| GB/T 32800.2-2023 |
Hand-held non-electric power tools - Safety requirements - Part 2: Cutting off and crimping power tools {译} 手持式非电类动力工具 安全要求 第2部分：切断和扣压动力工具 |
China National Standards Cut |
English PDF |
| GB/T 42325-2023 |
Electrical interface specification for phase-Cut dimmers in phase-cut dimming lighting systems {译} 切相调光照明系统中切相调光器的电气接口规范 |
China National Standards Cut |
English PDF |
| GB/T 42475-2023 |
Chemicals Apis chinensis ACute Oral Toxicity Test {译} 化学品 中华蜜蜂急性经口毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 41509-2022 |
Green manufacturing - Dry Cutting process performance evaluation specification {译} 绿色制造 干式切削工艺性能评价规范 |
China National Standards Cut |
English PDF |
| GB/T 1115-2022 |
Cylindrical milling Cutter {译} 圆柱形铣刀 |
China National Standards Cut |
English PDF |
| GB/T 41622-2022 |
Chemicals - Hornet aCute oral toxicity test {译} 化学品 大黄蜂急性经口毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 41623-2022 |
Chemicals ACute oral toxicity test for birds {译} 化学品 鸟类急性经口毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 21604-2022 |
Chemicals ACute skin irritation/corrosion test method {译} 化学品 急性皮肤刺激性/腐蚀性试验方法 |
China National Standards Cut |
English PDF |
| GB/T 21606-2022 |
Chemicals ACute dermal toxicity test method {译} 化学品 急性经皮毒性试验方法 |
China National Standards Cut |
English PDF |
| GB/T 41518-2022 |
Treatment method and control index of oil-based Cuttings in shale gas exploration and development {译} 页岩气勘探开发油基岩屑处理方法及控制指标 |
China National Standards Cut |
English PDF |
| GB/T 41388-2022 |
Information security technology trusted exeCution environment basic security specification {译} 信息安全技术 可信执行环境 基本安全规范 |
China National Standards Cut |
English PDF |
| GB/T 41356-2022 |
Superabrasive products - Test method for Cutting performance of diamond circular saw blades {译} 超硬磨料制品 金刚石圆锯片切割性能测试方法 |
China National Standards Cut |
English PDF |
| GB/T 42175-2022 |
Determination of copper, lead, zinc, cadmium and chromium in drilling mud and drilling Cuttings for offshore oil exploration and development Microwave digestion-inductively coupled plasma mass spectrometry {译} 海洋石油勘探开发钻井泥浆和钻屑中铜、铅、锌、镉、铬的测定 微波消解-电感耦合等离子体质谱法 |
China National Standards Cut |
English PDF |
| GB/T 41665-2022 |
Manufacturing ExeCution System Modular Framework {译} 制造执行系统模块化框架 |
China National Standards Cut |
English PDF |
| GB/T 36917.4-2022 |
Dentistry - Laboratory Cutting tools - Part 4: Microtungsten carbide cutting tools for laboratory use {译} 牙科学 技工室用刃具 第4部分：技工室用微型硬质合金刃具 |
China National Standards Cut |
English PDF |
| GB/T 36917.3-2022 |
Dentistry - Laboratory Cutting tools - Part 3: Carbide cutting tools for milling machines {译} 牙科学 技工室用刃具 第3部分：铣床用硬质合金刃具 |
China National Standards Cut |
English PDF |
| GB/T 2766-2022 |
Surgical instruments - General requirements and test methods for non-Cutting articulated instruments {译} 外科器械 非切割铰接器械通用要求和试验方法 |
China National Standards Cut |
English PDF |
| GB/T 41861-2022 |
Gas Welding Equipment Hose Assemblies for Welding, Cutting and Allied Process Equipment {译} 气焊设备 焊接、切割及相关工艺设备用软管组件 |
China National Standards Cut |
English PDF |
| GB/T 42066-2022 |
ACute viral infection respiratory sample collection {译} 急性病毒性感染呼吸道样本采集 |
China National Standards Cut |
English PDF |
| GB/Z 41595-2022 |
Safety of woodworking tools - Requirements for shanks of milling Cutters {译} 木工刀具安全 柄铣刀柄部的要求 |
China National Standards Cut |
English PDF |
| GB/T 40371-2021 |
Gas welding equipment—Materials for equipment used in gas welding, Cutting and allied processes 气焊设备 焊接、切割及相关工艺设备用材料 |
China National Standards Cut |
English PDF |
| GB/T 31214.2-2021 |
Springs—Shot peening—Part 2：Cut wire shot technical specification and testing 弹簧 喷丸 第2部分：钢丝切丸技术要求与检测 |
China National Standards Cut |
English PDF |
| GB/T 29076-2021 |
ExeCution requirements of quality problem closed loop for aerospace product 航天产品质量问题归零实施要求 |
China National Standards Cut |
English PDF |
| GB/T 9286-2021 |
Paints and varnishes—Cross-Cut test 色漆和清漆 划格试验 |
China National Standards Cut |
English PDF |
| GB/T 6132-2021 |
Interchangeability dimensions for milling Cutter or milling cutter arbors 铣刀和铣刀刀杆的互换尺寸 |
China National Standards Cut |
English PDF |
| GB/T 39981-2021 |
Building construction machinery and equipment—Portable,hand-held,internal combustion engine driven Cut-off machines—Safety requirements 建筑施工机械与设备 便携、手持、内燃机式切割机 安全要求 |
China National Standards Cut |
English PDF |
| GB/T 2076-2021 |
Indexable inserts for Cutting tools—Designation 切削刀具用可转位刀片 型号表示规则 |
China National Standards Cut |
English PDF |
| GB/T 39918-2021 |
Fabrication of ovine carcass and Cuts 羊胴体及鲜肉分割 |
China National Standards Cut |
English PDF |
| GB/T 39932-2021 |
Footwear manufacturing machines—Cutting and punching machines—Safety requirements 制鞋机械 裁断机与冲孔机 安全要求 |
China National Standards Cut |
English PDF |
| GB/T 39823-2021 |
Light conveyor belts—Tolerances on widths and lengths of Cut light conveyor belts 轻型输送带 切割式轻型输送带的宽度和长度极限偏差 |
China National Standards Cut |
English PDF |
| GB/T 39745-2021 |
CNC punching and laser Cutting composite machines 数控冲压激光切割复合机 |
China National Standards Cut |
English PDF |
| GB/T 41206-2021 |
Space environment (natural and artificial) -- Cosmic ray and solar energetic particle penetration inward the magnetosphere -- Method of determination of the effective vertical Cut-off rigidity 空间环境（自然和人工） 宇宙线和太阳能量粒子穿入磁层 有效垂直地磁截止刚度的确定方法 |
China National Standards Cut |
English PDF |
| GB/T 41201-2021 |
Grade of rose Cut flower 月季切花等级 |
China National Standards Cut |
English PDF |
| GB/T 41202-2021 |
Grade of carnation Cut flower 香石竹切花等级 |
China National Standards Cut |
English PDF |
| GB/T 41200-2021 |
Grade of lilium oriental hybrids Cut flower 东方百合切花等级 |
China National Standards Cut |
English PDF |
| GB/T 40966-2021 |
Quality assessment requirements for severe aCute respiratory syndrome coronavirus 2(SARS-CoV-2) antigen detection kit 新型冠状病毒抗原检测试剂盒质量评价要求 |
China National Standards Cut |
English PDF |
| GB/T 40999-2021 |
Quality assessment requirements for Severe ACute Respiratory Syndrome Coronavirus 2(SARS-CoV-2) total antibody detection kit 新型冠状病毒抗体检测试剂盒质量评价要求 |
China National Standards Cut |
English PDF |
| GB/T 40984-2021 |
Quality assessment requirements for severe aCute respiratory syndrome coronavirus 2(SARS-CoV-2）IgM antibody detection kit 新型冠状病毒IgM抗体检测试剂盒质量评价要求 |
China National Standards Cut |
English PDF |
| GB/T 40983-2021 |
Quality assessment requirements for severe aCute respiratory syndrome coronavirus 2(SARS-CoV-2) IgG antibody detection kit 新型冠状病毒IgG抗体检测试剂盒质量评价要求 |
China National Standards Cut |
English PDF |
| GB/T 40982-2021 |
Quality assessment requirements for severe aCute respiratory syndrome coronavirus 2(SARS-CoV-2) nucleic acid detection kit 新型冠状病毒核酸检测试剂盒质量评价要求 |
China National Standards Cut |
English PDF |
| GB/T 40804-2021 |
Short-term capability evaluation of machining processes on metal-Cutting machine tools 金属切削机床加工过程的短期能力评估 |
China National Standards Cut |
English PDF |
| GB/T 40806-2021 |
Airborne noise emitted by machine tools—Operating conditions for metal-Cutting machines 机床发射空气传播噪声 金属切削机床的操作条件 |
China National Standards Cut |
English PDF |
| GB/T 11094-2020 |
Gallium arsenide single crystal and Cutting wafer grown by horizontal bridgman method 水平法砷化镓单晶及切割片 |
China National Standards Cut |
English PDF |
| GB/T 38998-2020 |
Cut-size office paper—Measurement of edge quality 裁切后办公用纸 边缘质量的测定 |
China National Standards Cut |
English PDF |
| GB/T 9771.2-2020 |
Single-mode optical fibres for telecommunication—Part 2: Characteristics of a Cut-off wavelength shifted single-mode optical fibre 通信用单模光纤 第2部分：截止波长位移单模光纤特性 |
China National Standards Cut |
English PDF |
| GB/T 19725.2-2020 |
Agricultural and forestry machinery — Safety requirements and testing for portable, hand-held ,powered brush-Cutters and grass-trimmers — Part 2: Machines for use with back-pack power unit 农林机械 便携式割灌机和割草机安全要求和试验 第2部分：背负式动力机械 |
China National Standards Cut |
English PDF |
| GB/T 19725.1-2020 |
Agricultural and forestry machinery—Safety requirements and testing for portable,hand-held,powered brush-Cutters and grass-trimmers—Part 1:Machines fitted with an integral combustion engine 农林机械 便携式割灌机和割草机安全要求和试验 第1部分：侧挂式动力机械 |
China National Standards Cut |
English PDF |
| GB/T 19724-2020 |
Forestry machinery—Portable chain-saws and brush-Cutters—Exhaust system-caused fire risk 林业机械 便携式油锯和割灌机 易引起火险的排放系统 |
China National Standards Cut |
English PDF |
| GB/T 38613-2020 |
ExceCution requirements for independent assessment of space project 航天项目独立评估工作实施要求 |
China National Standards Cut |
English PDF |
| GB/T 38557.1-2020 |
Systems and software engineering—Interface and data exchange—Part 1:Interface specification for enterprise resource planning system and manufacturing exeCution system 系统与软件工程 接口和数据交换 第1部分：企业资源计划系统与制造执行系统的接口规范 |
China National Standards Cut |
English PDF |
| GB/T 39389-2020 |
Plastic composite hose for gas welding，Cutting and allied processes 气体焊接、切割和类似作业用复合塑料软管 |
China National Standards Cut |
English PDF |
| GB/T 39255-2020 |
Gases and gas mixtures for welding and Cutting processes 焊接与切割用保护气体 |
China National Standards Cut |
English PDF |
| GB/T 20323-2020 |
Milling Cutters designation —Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges 铣刀代号 整体或镶齿结构或带可转位切削刃的带柄和带孔铣刀 |
China National Standards Cut |
English PDF |
| GB/T 25124-2019 |
Specification for exeCutive search service 高级人才寻访服务规范 |
China National Standards Cut |
English PDF |
| GB/T 38005-2019 |
Spectacle lenses—Fundamental requirements for unCut finished lenses 眼镜镜片 未割边镜片的基本要求 |
China National Standards Cut |
English PDF |
| GB/T 37895-2019 |
Dimensions of accessories for Cutter arbors with parallel key and tenon drive 带平键和端键传动铣刀杆附件的尺寸 |
China National Standards Cut |
English PDF |
| GB/T 37891.6-2019 |
Cutter arbors with parallel key and tenon drive—Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system 带平键和端键传动的铣刀杆 第6部分：带钢球拉紧系统的模块圆锥柄刀杆的尺寸和标记 |
China National Standards Cut |
English PDF |
| GB/T 37891.5-2019 |
Cutter arbors with parallel key and tenon drive—Part 5:Dimensions and designation of tool holders with polygonal taper interface with flange contact surface 带平键和端键传动的铣刀杆 第5部分：带法兰接触面的多棱锥柄刀杆的尺寸和标记 |
China National Standards Cut |
English PDF |
| GB/T 37891.4-2019 |
Cutter arbors with parallel key and tenon drive—Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers 带平键和端键传动的铣刀杆 第4部分：带7:24手动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards Cut |
English PDF |
| GB/T 37891.3-2019 |
Cutter arbors with parallel key and tenon drive—Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers 带平键和端键传动的铣刀杆 第3部分：带7:24自动换刀圆锥柄刀杆的尺寸和标记 |
China National Standards Cut |
English PDF |
| GB/T 37891.2-2019 |
Cutter arbors with parallel key and tenon drive—Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface 带平键和端键传动的铣刀杆 第2部分：带法兰接触面的空心圆锥柄刀杆的尺寸和标记 |
China National Standards Cut |
English PDF |
| GB/T 37891.1-2019 |
Cutter arbors with parallel key and tenon drive—Part 1: General dimensions 带平键和端键传动的铣刀杆 第1部分：通用尺寸 |
China National Standards Cut |
English PDF |
| GB/T 37810-2019 |
General matching specification for large Cutting height mining face 大采高综采工作面总体配套技术条件 |
China National Standards Cut |
English PDF |
| GB/T 37400.9-2019 |
Heavy mechanical general technical specification—Part 2：Flame Cutting parts 重型机械通用技术条件 第9部分：切削加工件 |
China National Standards Cut |
English PDF |
| GB/T 9959.3-2019 |
Fresh and frozen pork and pig by-products—Part 3：Pork Cuts 鲜、冻猪肉及猪副产品 第3部分：分部位分割猪肉 |
China National Standards Cut |
English PDF |
| GB/T 36917.2-2018 |
Dentistry—Laboratory Cutters—Part 2:Carbide laboratory cutters 牙科学-技工室用刃具-第2部分：技工室用硬质合金刃具 |
China National Standards Cut |
English PDF |
| GB/T 36917.1-2018 |
Dentistry—Laboratory Cutters—Part 1:Steel laboratory cutters 牙科学-技工室用刃具-第1部分：技工室用钢质刃具 |
China National Standards Cut |
English PDF |
| GB/T 26136-2018 |
Ultra-high pressure waterjet Cutting machine 超高压水切割机 |
China National Standards Cut |
English PDF |
| GB/T 35060.2-2018 |
General specification of shearer—Part 2: Cutting transmission unit 滚筒采煤机通用技术条件 第2部分：截割传动装置 |
China National Standards Cut |
English PDF |
| GB/T 12965-2018 |
Monocrystalline silicon as Cut wafers and lapped wafers 硅单晶切割片和研磨片 |
China National Standards Cut |
English PDF |
| GB/T 34380-2017 |
CNC laser Cutting machine 数控激光切割机 |
China National Standards Cut |
English PDF |
| GB/T 34493-2017 |
Aluminium alloys extruded rods for easy-Cutting 易切削铝合金挤压棒材 |
China National Standards Cut |
English PDF |
| GB/T 15972.44-2017 |
Specifications for optical fibre test methods—Part 44: Measurement methods and test procedures for transmission and optical characteristics—Cut-off wavelength 光纤试验方法规范 第44部分：传输特性和光学特性的测量方法和试验程序 截止波长 |
China National Standards Cut |
English PDF |
| GB/T 15670.4-2017 |
Toxicological test methods for pesticides registration—Part 4:ACute oral toxicity test—Miller and Taninter’s method 农药登记毒理学试验方法 第4部分：急性经口毒性试验 概率单位法 |
China National Standards Cut |
English PDF |
| GB/T 10598.1-2017 |
Open-Cut mine rotary blast hole drill—Part 1：Common technology 露天矿用牙轮钻机和旋转钻机 第1部分：通用技术 |
China National Standards Cut |
English PDF |
| GB/T 15670.5-2017 |
Toxicological test methods for pesticides registration—Part 5: ACute dermal toxicity test 农药登记毒理学试验方法 第5部分：急性经皮毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 15670.2-2017 |
Toxicological test methods for pesticides registration—Part 2: ACute oral toxicity test—Horn’s method 农药登记毒理学试验方法 第2部分：急性经口毒性试验 霍恩氏法 |
China National Standards Cut |
English PDF |
| GB/T 15670.6-2017 |
Toxicological test methods for pesticides registration—Part 6: ACute inhalation toxicity test 农药登记毒理学试验方法 第6部分：急性吸入毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 15670.8-2017 |
Toxicological test methods for pesticides registration—Part 8: ACute eye irritation/corrosion test 农药登记毒理学试验方法 第8部分：急性眼刺激性/腐蚀性试验 |
China National Standards Cut |
English PDF |
| GB/T 10598.2-2017 |
Open-Cut mine rotary blast hole drill—Part 2：Industrial test method 露天矿用牙轮钻机和旋转钻机 第2部分：工业试验方法 |
China National Standards Cut |
English PDF |
| GB/T 15670.25-2017 |
Toxicological test methods for pesticides registration—Part 25:ACute delayed neurotoxicity test 农药登记毒理学试验方法 第25部分：急性迟发性神经毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 15670.3-2017 |
Toxicological test methods for pesticides registration—Part 3: ACute oral toxicity test—Up-and-down-procedure 农药登记毒理学试验方法 第3部分：急性经口毒性试验 序贯法 |
China National Standards Cut |
English PDF |
| GB/T 11263-2017 |
Hot rolled H and Cut T section steel 热轧H型钢和剖分T型钢 |
China National Standards Cut |
English PDF |
| GB/T 18516-2017 |
Portable chain saws—Measurement of Cutting rate and fuel consumption—Engineering method 便携式油锯 锯切效率和燃油消耗率试验方法 工程法 |
China National Standards Cut |
English PDF |
| GB 51219-2017 |
Code for design of poultry slaughtering and Cutting rooms 禽类屠宰与分割车间设计规范 |
China National Standards Cut |
English PDF |
| GB/T 6122-2017 |
Corner-rounding Cutters 圆角铣刀 |
China National Standards Cut |
English PDF |
| GB/T 35217-2017 |
Cutting panel 锯切薄板 |
China National Standards Cut |
English PDF |
| GB/T 15067.2-2016 |
Stainless steel Cutlery 不锈钢餐具 |
China National Standards Cut |
English PDF |
| GB/T 32754-2016 |
Cut and opened degummed ramie 苎麻精干麻切段开松麻 |
China National Standards Cut |
English PDF |
| GB/T 17345-2016 |
SCutched flax 亚麻打成麻 |
China National Standards Cut |
English PDF |
| GB/T 32556.3-2016 |
Cutter arbors with tenon drive—Part 3: Dimensions of hollow taper interface with flange contact surface 带端键传动的铣刀杆 第3部分：带法兰接触面的空心锥柄的铣刀杆尺寸 |
China National Standards Cut |
English PDF |
| GB/T 32556.2-2016 |
Cutter arbors with tenon drive—Part 2: Dimensions of 7:24 taper 带端键传动的铣刀杆 第2部分：带7:24锥柄的铣刀杆尺寸 |
China National Standards Cut |
English PDF |
| GB/T 32556.1-2016 |
Cutter arbors with tenon drive—Part 1: Dimension of Morse taper 带端键传动的铣刀杆 第1部分：带莫氏锥柄的铣刀杆尺寸 |
China National Standards Cut |
English PDF |
| GB/T 32537-2016 |
Runouts, underCuts and chamfers for trapezoidal and buttress threads 梯形和锯齿形螺纹收尾、肩距、退刀槽和倒角 |
China National Standards Cut |
English PDF |
| GB/T 32535-2016 |
Runouts, underCuts and chamfers for pipe threads 管螺纹收尾、肩距、退刀槽和倒角 |
China National Standards Cut |
English PDF |
| GB/T 32532-2016 |
Nonconsumable tungsten electrodes for arc welding and Cutting 焊接与切割用钨极 |
China National Standards Cut |
English PDF |
| GB/T 2550-2016 |
Gas welding equipment—Rubber hoses for welding, Cutting and allied processes 气体焊接设备 焊接、切割和类似作业用橡胶软管 |
China National Standards Cut |
English PDF |
| GB/T 31301.5-2015 |
Footwear machines—Safety requirements—Part 5: Splitting,Trimming and Cutting machines 制鞋机械 安全要求 第5部分：片革机、修边机和裁条机 |
China National Standards Cut |
English PDF |
| GB/T 32111-2015 |
Rubber clamp ring for Cutting cold-rolling sheet 冷轧钢板剪切用橡胶压紧环 |
China National Standards Cut |
English PDF |
| GB/T 31908-2015 |
Tungsten electrodes for arc welding and plasma welding and Cutting 电弧焊和等离子焊接、切割用钨电极 |
China National Standards Cut |
English PDF |
| GB/T 18838.5-2015 |
Preparation of steel substrates before application of paints and related products—Specifications for metallic blast-cleaning abrasives—Part 5: Steel Cut wire shot 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 第5部分：钢丝切丸 |
China National Standards Cut |
English PDF |
| GB/T 31586.2-2015 |
Corrosion protection of steel structures by protective paint systems—Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating—Part 2: Cross-Cut testing and X-cut testing 防护涂料体系对钢结构的防腐蚀保护 涂层附着力/内聚力（破坏强度）的评定和验收准则 第2部分：划格试验和划叉试验 |
China National Standards Cut |
English PDF |
| GB/T 31469-2015 |
Semiconductor materials Cutting fluid 半导体材料切削液 |
China National Standards Cut |
English PDF |
| GB/T 31461-2015 |
Guide for run back and fast Cut back control in fossil fuel power plant 火力发电机组快速减负荷控制技术导则 |
China National Standards Cut |
English PDF |
| GB/T 3167-2015 |
Metal-Cutting machine tools—Graphical symbols for operation indications 金属切削机床 操作指示图形符号 |
China National Standards Cut |
English PDF |
| GB 15193.3-2014 |
National Food Safety Standard-ACute oral toxicity test 食品安全国家标准 急性经口毒性试验 |
China National Standards Cut |
English PDF |
| GB 15579.8-2014 |
Arc welding equipment—Part 8: Gas consoles for welding and plasma Cutting systems 弧焊设备 第8部分：焊接和等离子切割系统的气路装置 |
China National Standards Cut |
English PDF |
| GB/T 31322-2014 |
Multifunctional vegetable Cutter test method 多功能切菜机试验方法 |
China National Standards Cut |
English PDF |
| GB/T 31270.9-2014 |
Test guidelines on environmental safety assessment for chemical pesticides―Part 9: Avian aCute toxicity test 化学农药环境安全评价试验准则 第9部分：鸟类急性毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 31270.18-2014 |
Test guidelines on environmental safety assessment for chemical pesticides―Part 18: Amphibian aCute toxicity test 化学农药环境安全评价试验准则 第18部分：天敌两栖类急性毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 31270.17-2014 |
Test guidelines on environmental safety assessment for chemical pesticides―Part 17: Trichogramma aCute toxicity test 化学农药环境安全评价试验准则 第17部分：天敌赤眼蜂急性毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 31270.15-2014 |
Test guidelines on environmental safety assessment for chemical pesticides―Part 15: Earthworm aCute toxicity test 化学农药环境安全评价试验准则 第15部分：蚯蚓急性毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 31270.13-2014 |
Test guidelines on environmental safety assessment for chemical pesticides―Part 13: Daphnia sp. aCute immobilisation test 化学农药环境安全评价试验准则 第13部分： 类急性活动抑制试验 |
China National Standards Cut |
English PDF |
| GB/T 31270.12-2014 |
Test guidelines on environmental safety assessment for chemical pesticides―Part 12: Fish aCute toxicity test 化学农药环境安全评价试验准则 第12部分：鱼类急性毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 31270.11-2014 |
Test guidelines on environmental safety assessment for chemical pesticides―Part 11: Silkworm aCute toxicity test 化学农药环境安全评价试验准则 第11部分：家蚕急性毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 31270.10-2014 |
Test guidelines on environmental safety assessment for chemical pesticides―Part 10: Honeybee aCute toxicity test 化学农药环境安全评价试验准则 第10部分：蜜蜂急性毒性试验 |
China National Standards Cut |
English PDF |
| GB 31145-2014 |
Safety of woodworking machines—Circular saw benches/up-Cutting cross-cut sawing machines 木工机床安全 带上切式横截手动进给圆锯机 |
China National Standards Cut |
English PDF |
| GB 19725.2-2014 |
Agricultural and forestry machinery―Safety requirements and testing for portable hand-held powered brush-Cutters and grass-trimmers―Part 2: Machines for use with back-pack power unit 农林机械 便携式割灌机和割草机安全要求和试验 第2部分：背负式动力机械 |
China National Standards Cut |
English PDF |
| GB 19725.1-2014 |
Agricultural and forestry machinery―Safety requirements and testing for portable,hand-held,powered brush-Cutters and grass-trimmers―Part 1: Machines fitted with an integral combustion engine 农林机械 便携式割灌机和割草机安全要求和试验 第1部分：侧挂式动力机械 |
China National Standards Cut |
English PDF |
| GB/T 31210.2-2014 |
Green manufacturing—Near dry Cutting—Part 2: Technical requirements for minimum quantity lubricating system 绿色制造 亚干式切削 第2部分：微量润滑系统技术要求 |
China National Standards Cut |
English PDF |
| GB/T 31210.1-2014 |
Green manufacturing—Near dry Cutting—Part 1: General requirements 绿色制造 亚干式切削 第1部分：通用技术要求 |
China National Standards Cut |
English PDF |
| GB/T 31209-2014 |
Technical requirements for cryogenic cold air Cutting 绿色制造 低温冷风切削 技术要求 |
China National Standards Cut |
English PDF |
| GB 30865.1-2014 |
Hand protection―Gloves protecting against Cuts and stabs by hand knives - Part 1：Chain-mail gloves and arm guards 手部防护 手持刀具割伤和刺伤的防护手套 第1部分：金属链甲手套和护臂 |
China National Standards Cut |
English PDF |
| GB/T 30790.7-2014 |
Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 7: ExeCution and supervision of paint work 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第7部分：涂装的实施和管理 |
China National Standards Cut |
English PDF |
| GB/T 4457.5-2013 |
Mechanical drawings―Basic conventions for representing areas on Cuts and sections 机械制图 剖面区域的表示法 |
China National Standards Cut |
English PDF |
| GB 30000.18-2013 |
Rules for classification and labelling of chemicals - Part 18: ACute toxicity 化学品分类和标签规范 第18部分：急性毒性 |
China National Standards Cut |
English PDF |
| GB/T 4893.4-2013 |
Test of surface coatings of furniture - Part 4：Determination of adhesion - Cross Cut 家具表面漆膜理化性能试验 第4部分：附着力交叉切割测定法 |
China National Standards Cut |
English PDF |
| GB/T 29763-2013 |
Chemicals - Rare Minnow (Gobiocypris rarus) aCute toxicity test 化学品 稀有鮈鲫急性毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 9575-2013 |
Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on Cut-to-length hoses 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差 |
China National Standards Cut |
English PDF |
| GB/T 29508-2013 |
300mm monocrystalline silicon as Cut slices and grinded slices 300mm 硅单晶切割片和磨削片 |
China National Standards Cut |
English PDF |
| GB/Z 29014-2012 |
Cutting tool data representation and exchange - Definitions, principles and methods for reference dictionaries 切削刀具数据表达与交换 参考字典的定义、原则和方法 |
China National Standards Cut |
English PDF |
| GB/T 29076-2012 |
ExeCution requirements for quality problem close loop of aerospace product 航天产品质量问题归零实施要求 |
China National Standards Cut |
English PDF |
| GB/T 29392-2012 |
Beef Cuts grading for high rib、ribeye、striploin、tenderloin of normal beef 普通肉牛上脑、眼肉、外脊、里脊等级划分 |
China National Standards Cut |
English PDF |
| GB/T 28966-2012 |
Cutter/bucket-wheel dredger supervisory control system 绞吸/斗轮挖泥船疏浚监控系统 |
China National Standards Cut |
English PDF |
| GB/T 16125-2012 |
Method for aCute toxicity test of Daphnia magna straus 大型？急性毒性实验方法 |
China National Standards Cut |
English PDF |
| GB 10810.4-2012 |
UnCut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings 眼镜镜片 第4部分：减反射膜规范及测量方法 |
China National Standards Cut |
English PDF |
| GB/T 28685-2012 |
Product grade of eustoma Cut flowers 洋桔梗切花产品等级 |
China National Standards Cut |
English PDF |
| GB/T 28680-2012 |
Product grade of hydrangea Cut flowers 八仙花切花产品等级 |
China National Standards Cut |
English PDF |
| GB/T 28648-2012 |
Chemicals - ACute inhalation toxicity testing - Acute toxic class method 化学品 急性吸入毒性试验 急性毒性分类法 |
China National Standards Cut |
English PDF |
| GB 10810.5-2012 |
UnCut finished spectacle lenses - Part 5: Requirements of abrasion-resistant for spectacle lens surfaces 眼镜镜片 第5部分: 镜片表面耐磨要求 |
China National Standards Cut |
English PDF |
| GB/T 28615-2012 |
Green manufacturing - The technology specification for metal-Cutting machine tool remanufacturing 绿色制造 金属切削机床再制造技术导则 |
China National Standards Cut |
English PDF |
| GB/T 28614-2012 |
Green manufacturing - The general technique guideline for dry Cutting 绿色制造 干式切削 通用技术指南 |
China National Standards Cut |
English PDF |
| GB/T 28424-2012 |
Graphical symbols and Cutline for use in equipment of TV monitoring system for traffic 交通电视监控系统设备用图形符号及图例 |
China National Standards Cut |
English PDF |
| GB/T 28277-2012 |
Silicon-based MEMS fabrication technology - Measurement method of Cutting and pull-press strength of micro bonding area 硅基MEMS制造技术 微键合区剪切和拉压强度检测方法 |
China National Standards Cut |
English PDF |
| GB/T 18961-2012 |
Forestry machinery - Portable hand-held brush-Cutters and grass-trimmers - Vocabulary 林业机械 便携式割灌机和割草机 词汇 |
China National Standards Cut |
English PDF |
| GB/T 14176-2012 |
Forestry machinery - Gasoline powered portable brush Cutters and grass trimmers 林业机械 以汽油机为动力的便携式割灌机和割草机 |
China National Standards Cut |
English PDF |
| GB/T 6119-2012 |
Side and face milling Cutter 三面刃铣刀 |
China National Standards Cut |
English PDF |
| GB/T 28247-2012 |
Rotary gear milling Cutters 盘形齿轮铣刀 |
China National Standards Cut |
English PDF |
| GB/T 27683-2011 |
Specifications for recovery of Cutting filings of free-cutting copper alloys 易切削铜合金切削废屑回收规范 |
China National Standards Cut |
English PDF |
| GB/T 27672-2011 |
Copper and copper alloy seamless tube for welding and Cutting 焊割用铜及铜合金无缝管 |
China National Standards Cut |
English PDF |
| GB/T 27828-2011 |
Chemicals - Test method of in vitro skin corrosion - TransCutaneous electrical resistance test（TER） 化学品 体外皮肤腐蚀 经皮电阻试验方法 |
China National Standards Cut |
English PDF |
| GB/T 27824-2011 |
Chemicals - Test method of aCute inhalation toxicity - Fixed concentration procedure 化学品 急性吸入毒性 固定浓度试验方法 |
China National Standards Cut |
English PDF |
| GB/T 27823-2011 |
Chemicals - Test method of aCute dermal toxicity - Fixed dose procedure 化学品 急性经皮毒性 固定剂量试验方法 |
China National Standards Cut |
English PDF |
| GB/T 27861-2011 |
Chemicals - Fish aCute toxicity test 化学品 鱼类急性毒性试验 |
China National Standards Cut |
English PDF |
| GB/T 27643-2011 |
Beef carcass and Cuts 牛胴体及鲜肉分割 |
China National Standards Cut |
English PDF |
| GB 26787-2011 |
Safety specifications of line regulator used in welding,Cutting and allied processes 焊接、切割及类似工艺用管路减压器安全规范 |
China National Standards Cut |
English PDF |
| GB/T 26502.1-2011 |
Transmission belt rubber sheets Cutting and splicing machine 传动带胶片裁断拼接机 |
China National Standards Cut |
English PDF |
| GB/T 26306-2010 |
Free-Cutting copper alloy rod and bar 易切削铜合金棒 |
China National Standards Cut |
English PDF |
| GB/T 26136-2010 |
Ultra-high pressrue waterjet Cutting machine 超高压水切割机 |
China National Standards Cut |
English PDF |
| GB/T 26071-2010 |
Mono-crystalline silicon as Cut slices for photovoltaic solar cells 太阳能电池用硅单晶切割片 |
China National Standards Cut |
English PDF |
| GB/T 26048-2010 |
Free-Cutting copper alloy wire 易切削铜合金线材 |
China National Standards Cut |
English PDF |
| GB/T 11263-2010 |
Hot-rolled H and Cut T section steel 热轧H型钢和剖分T型钢 |
China National Standards Cut |
English PDF |
| GB/T 25680-2010 |
Printing machinery - Bed-type platen-die Cutting and creasing machine 印刷机械 卧式平压模切机 |
China National Standards Cut |
English PDF |
| GB/T 25671-2010 |
High speed steels metal Cutting tools with hard coating - Technical specifications 硬质涂层高速钢刀具 技术条件 |
China National Standards Cut |
English PDF |
| GB/T 25665-2010 |
Solid end mills with corner radii and cylindrical shanks made of hard Cutting materials - Dimensions 整体硬切削材料直柄圆弧立铣刀 尺寸 |
China National Standards Cut |
English PDF |
| GB/T 25664-2010 |
Milling Cutters for high speed machining - Safety requirements 高速切削铣刀 安全要求 |
China National Standards Cut |
English PDF |
| GB/T 25485-2010 |
Industrial automation systems and integration - Functional architecture of manufacturing exeCution system 工业自动化系统与集成 制造执行系统功能体系结构 |
China National Standards Cut |
English PDF |
| GB/T 25473-2010 |
Line regulator used in welding,Cutting and allied processes 焊接、切割及类似工艺用管路减压器 |
China National Standards Cut |
English PDF |
| GB/T 6117.3-2010 |
End mills - Part 3: Milling Cutters with 7：24 taper shanks 立铣刀 第3部分：7:24锥柄立铣刀 |
China National Standards Cut |
English PDF |
| GB/T 6117.2-2010 |
End mills - Part 2: Milling Cutters with morse taper shanks 立铣刀 第2部分：莫氏锥柄立铣刀 |
China National Standards Cut |
English PDF |
| GB/T 6117.1-2010 |
End mills - Part 1: Milling Cutters with parallel shanks 立铣刀 第1部分：直柄立铣刀 |
China National Standards Cut |
English PDF |
| GB/T 25376-2010 |
Metal-Cutting machine tools - General specifications of machining parts 金属切削机床 机械加工件通用技术条件 |
China National Standards Cut |
English PDF |
| GB/T 25375-2010 |
Metal-Cutting machine tools - Check and evaluation for combine surface by miniating 金属切削机床 结合面涂色法检验及评定 |
China National Standards Cut |
English PDF |
| GB/T 25374-2010 |
Metal-Cutting machine tools - Measuring method of cleanliness 金属切削机床 清洁度的测量方法 |
China National Standards Cut |
English PDF |
| GB/T 25373-2010 |
Metal-Cutting machine tools - General specifications of assembling 金属切削机床 装配通用技术条件 |
China National Standards Cut |
English PDF |
| GB/T 25372-2010 |
Metal-Cutting machine tools - Accuracy grade 金属切削机床 精度分级 |
China National Standards Cut |
English PDF |
| GB/T 25369-2010 |
Metal Cutting-bimetal band saw blades - Technical specifications 金属切割双金属带锯条 技术条件 |
China National Standards Cut |
English PDF |
| GB/T 12204-2010 |
Glossary of general terms in metal Cutting 金属切削 基本术语 |
China National Standards Cut |
English PDF |
| GB/T 14895-2010 |
Terms in metal Cutting tools - Gear cutters 金属切削刀具术语 切齿刀具 |
China National Standards Cut |
English PDF |
| GB/T 25124-2010 |
Specification for exeCutive search service 高级人才寻访服务规范 |
China National Standards Cut |
English PDF |
| Find out:404Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
