Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 22076-2024 |
Pneumatics - Cylindrical quick-change connectors {译} 气动-圆柱形快换接头 |
China National Standards Cylindrical |
 English PDF |
| GB/T 43480-2023 |
Non-destructive testing Phased array ultrasonic Cylindrical imaging guided wave testing {译} 无损检测 相控阵超声柱面成像导波检测 |
China National Standards Cylindrical |
English PDF |
| GB/T 10095.2-2023 |
Cylindrical gear ISO tooth surface tolerance classification system Part 2: Definition and allowable value of radial comprehensive deviation {译} 圆柱齿轮 ISO齿面公差分级制 第2部分：径向综合偏差的定义和允许值 |
China National Standards Cylindrical |
English PDF |
| GB/T 20333-2023 |
Basic Dimensions and Designations of Taps for Cylindrical and Conical Pipe Threads {译} 圆柱和圆锥管螺纹丝锥的基本尺寸和标志 |
China National Standards Cylindrical |
English PDF |
| GB/T 1115-2022 |
Cylindrical milling cutter {译} 圆柱形铣刀 |
China National Standards Cylindrical |
English PDF |
| GB/T 41103-2022 |
Rolling bearings - Ceramic Cylindrical rollers - Dimensions, product geometric specifications (GPS) and tolerance values {译} 滚动轴承 陶瓷圆柱滚子 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards Cylindrical |
English PDF |
| GB/T 5900.4-2022 |
Machine tools - Dimensions of spindle end and chuck connections - Part 4: Cylindrical connections {译} 机床 主轴端部与卡盘连接尺寸 第4部分：圆柱连接 |
China National Standards Cylindrical |
English PDF |
| GB/T 22131-2022 |
Ultrasonic Testing Method for the Inner Surface of Cylindrical Forgings {译} 筒形锻件内表面超声波检测方法 |
China National Standards Cylindrical |
English PDF |
| GB/T 10095.1-2022 |
Cylindrical gears - ISO tooth surface tolerance classification system - Part 1: Definition and permissible values of tooth surface deviations {译} 圆柱齿轮 ISO齿面公差分级制 第1部分：齿面偏差的定义和允许值 |
China National Standards Cylindrical |
English PDF |
| GB/T 1973.1-2021 |
Small Cylindrical springs—Part 1：Technical specification 小型圆柱螺旋弹簧 第1部分：技术条件 |
China National Standards Cylindrical |
English PDF |
| GB/T 283-2021 |
Rolling bearings—Cylindrical roller bearings—Boundary dimensions 滚动轴承 圆柱滚子轴承 外形尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 26978-2021 |
Design and manufacture of site built, vertical, Cylindrical, flat-bottomed steel tanks for the storage of cryogenic liquefied gas 现场组装立式圆筒平底钢质低温液化气储罐的设计与建造 |
China National Standards Cylindrical |
English PDF |
| GB/T 39519-2020 |
Hydranlic Cylindrically helical compression spring with high working stress—Technical specifications 高应力液压件圆柱螺旋压缩弹簧 技术条件 |
China National Standards Cylindrical |
English PDF |
| GB/T 2078-2019 |
Dimensions of indexable hardmetal (carbide) inserts with rounded corners,with Cylindrical fixing hole 带圆角圆孔固定的硬质合金可转位刀片尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 12760-2018 |
Cylindrical worm and wormwheel information of the dimensional data to be givem on the drawing 圆柱蜗杆、蜗轮图样上应注明的尺寸数据 |
China National Standards Cylindrical |
English PDF |
| GB/T 10088-2018 |
Module and diameter of Cylindrical worm 圆柱蜗杆模数和直径 |
China National Standards Cylindrical |
English PDF |
| GB/T 10085-2018 |
Basic paramaters of Cylindrical worm gears 圆柱蜗杆传动基本参数 |
China National Standards Cylindrical |
English PDF |
| GB/T 10087-2018 |
Basic tooth profile of Cylindrical worm 圆柱蜗杆基本齿廓 |
China National Standards Cylindrical |
English PDF |
| GB/T 10089-2018 |
Accuracy of Cylindrical worm and wormwheel 圆柱蜗杆、蜗轮精度 |
China National Standards Cylindrical |
English PDF |
| GB/T 10086-2018 |
Symbols for Cylindrical worm and wormwheel 圆柱蜗杆、蜗轮代号 |
China National Standards Cylindrical |
English PDF |
| GB/T 4663-2017 |
Rolling bearings—Cylindrical thrust roller bearings—Boundary dimensions 滚动轴承 推力圆柱滚子轴承 外形尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 1132-2017 |
Machine chucking reamers with Cylindrical shanks and Morse taper shanks 直柄和莫氏锥柄机用铰刀 |
China National Standards Cylindrical |
English PDF |
| GB/T 7064-2017 |
Specific requirements for Cylindrical rotor synchronous machines 隐极同步发电机技术要求 |
China National Standards Cylindrical |
English PDF |
| GB/T 13235.1-2016 |
Petroleum and liquid petroleum products—Calibration of vertical Cylindrical tanks—Part 1: Strapping method 石油和液体石油产品 立式圆筒形油罐容积标定 第1部分：围尺法 |
China National Standards Cylindrical |
English PDF |
| GB/T 20140-2016 |
Measurement method and evaluation criteria of dynamic characteristic and vibration on stator end windings of Cylindrical synchronous generators 隐极同步发电机定子绕组端部动态特性和振动测量方法及评定 |
China National Standards Cylindrical |
English PDF |
| GB/T 4661-2015 |
Rolling bearings—Cylindrical rollers 滚动轴承 圆柱滚子 |
China National Standards Cylindrical |
English PDF |
| GB/T 9989.4-2015 |
Vitreous and porcelain enamels—Determination of resistance to chemical corrosion—Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a Cylindrical vessel 搪瓷耐化学侵蚀的测定 第4部分：用圆柱形容器进行耐碱溶液侵蚀的测定 |
China National Standards Cylindrical |
English PDF |
| GB 50341-2014 |
Code for design of vertical Cylindrical welded steel oil tanks 立式圆筒形钢制焊接油罐设计规范 |
China National Standards Cylindrical |
English PDF |
| GB 50128-2014 |
Code for construction of vertical Cylindrical steel welded storage tanks 立式圆筒形钢制焊接储罐施工规范 |
China National Standards Cylindrical |
English PDF |
| GB/T 30474.2-2013 |
Holding fixtures of Cylindrical abrasive sleeves―Part 2: Holding fixtures for stationary machines 筒形砂套夹紧装置 第2部分：用于固定式磨削机上的夹紧装置 |
China National Standards Cylindrical |
English PDF |
| GB/T 30474.1-2013 |
Holding fixtures of Cylindrical abrasive sleeves―Part 1: Holding fixtures with shank for hand-held grinding machines 筒形砂套夹紧装置 第1部分：用于手持式磨削机上的带轴夹紧装置 |
China National Standards Cylindrical |
English PDF |
| GB/T 30473-2013 |
Coated abrasives―Cylindrical abrasive sleeves 涂附磨具 筒形砂套 |
China National Standards Cylindrical |
English PDF |
| GB/T 285-2013 |
Rolling bearings - Double row Cylindrical roller bearings - Boundary dimensions 滚动轴承 双列圆柱滚子轴承 外形尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 5106-2012 |
Straight Cylindrical involute splines - Gauge 圆柱直齿渐开线花键 量规 |
China National Standards Cylindrical |
English PDF |
| GB/T 19382.2-2012 |
Textile machinery and accessories - Cylindrical sliver cans - Part 2:Spring bottoms 纺织机械与附件 圆柱形条筒 第2部分：弹簧托盘 |
China National Standards Cylindrical |
English PDF |
| GB/T 19382.1-2012 |
Textile machinery and accessories - Cylindrical sliver cans - Part 1: Main dimensions 纺织机械与附件 圆柱形条筒 第1部分：主要尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 20057-2012 |
Rolling bearings - Single-row Cylindrical roller bearings - Chamfer dimensions for loose rib and non-rib sides 滚动轴承 圆柱滚子轴承 平挡圈和套圈无挡边端倒角尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 27559-2011 |
Rolling bearing - Cylindrical roller bearings for spindles of machines 滚动轴承 机床主轴用圆柱滚子轴承 |
China National Standards Cylindrical |
English PDF |
| GB/T 20060-2011 |
Rolling bearings - Cylindrical roller bearings,separate thrust collars - Boundary dimensions 滚动轴承 圆柱滚子轴承 可分离斜挡圈 外形尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 26978.5-2011 |
Design and manufacture of site built, vertical, Cylindrical flat-bottomed steel tanks for the storage of liquefied nature gases - Part 5: Testing, drying, purging and cool-down 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第5部分：试验、干燥、置换及冷却 |
China National Standards Cylindrical |
English PDF |
| GB/T 26978.4-2011 |
Design and manufacture of site built, vertical, Cylindrical, flat-bottomed steel tanks for the storage of liquefied nature gases - Part 4: Insulation components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第4部分：绝热构件 |
China National Standards Cylindrical |
English PDF |
| GB/T 26978.3-2011 |
Design and manufacture of site built, vertical, Cylindrical,flat-bottomed steel tanks for the storage of liquefied nature gases - Part 3: Concrete components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第3部分：混凝土构件 |
China National Standards Cylindrical |
English PDF |
| GB/T 26978.2-2011 |
Design and manufacture of site built, vertical, Cylindrical flat-bottomed steel tanks for the storage of liquefied nature gases - Part 2: Metallic components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第2部分：金属构件 |
China National Standards Cylindrical |
English PDF |
| GB/T 26978.1-2011 |
Design and manufacture of site built, vertical, Cylindrical，flat-bottomed steel tanks for the storage of liquefied nature gases - Part 1: General 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第1部分：总则 |
China National Standards Cylindrical |
English PDF |
| GB/T 26703-2011 |
Determination of abrasion resistance for top piece of leather shoes -Rotation Cylindrical drum method 皮鞋跟面耐磨性能试验方法 旋转辊筒式磨耗机法 |
China National Standards Cylindrical |
English PDF |
| GB/T 25992-2010 |
Solid ball-nosed end mills with Cylindrical shanks made of carbide and ceramic materials - Dimensions 整体硬质合金和陶瓷直柄球头立铣刀 尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 25964-2010 |
Petroleum and liquid petroleum products - Determination of volume,density and mass of the hydrocarbon content of vertical Cylindrical tanks by hybrid tank measurement systems 石油和液体石油产品 采用混合式油罐测量系统测量立式圆筒形油罐内油品体积、密度和质量的方法 |
China National Standards Cylindrical |
English PDF |
| GB/T 25665-2010 |
Solid end mills with corner radii and Cylindrical shanks made of hard cutting materials - Dimensions 整体硬切削材料直柄圆弧立铣刀 尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 25768-2010 |
Rolling bearings - Combined needle roller bearings with double direction thrust Cylindrical roller bearings 滚动轴承 滚针和双向推力圆柱滚子组合轴承 |
China National Standards Cylindrical |
English PDF |
| GB/T 756-2010 |
Cylindrical shaft extension for rotating electrical machines 旋转电机 圆柱形轴伸 |
China National Standards Cylindrical |
English PDF |
| GB/T 24759-2009 |
Cylindrical coordinate measuring machines 柱坐标测量机 |
China National Standards Cylindrical |
English PDF |
| GB/T 24610.4-2009 |
Rolling bearings - Measuring methods for vibration - Part 4: Radial Cylindrical roller bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第4部分：具有圆柱孔和圆柱外表面的圆柱滚子轴承 |
China National Standards Cylindrical |
English PDF |
| GB/T 24633.1-2009 |
Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of Cylindrical form 产品几何技术规范（GPS） 圆柱度 第1部分：词汇和参数 |
China National Standards Cylindrical |
English PDF |
| GB/T 24610.3-2009 |
Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with Cylindrical bore and outside surface 滚动轴承 振动测量方法 第3部分：具有圆柱孔和圆柱外表面的调心滚子轴承和圆锥滚子轴承 |
China National Standards Cylindrical |
English PDF |
| GB/T 24610.2-2009 |
Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with Cylindrical bore and outside surface 滚动轴承 振动测量方法 第2部分：具有圆柱孔和圆柱外表面的向心球轴承 |
China National Standards Cylindrical |
English PDF |
| GB 24384-2009 |
External Cylindrical grinding machines - Safeguarding specifications 外圆磨床 安全防护技术条件 |
China National Standards Cylindrical |
English PDF |
| GB/T 24349.7-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 7: Dimensions, tolerances and designation of perforated tubes for cheese dyeing 纺织机械与附件 圆柱形筒管 第7部分：筒子纱染色用网眼筒管的尺寸、偏差和标记 |
China National Standards Cylindrical |
English PDF |
| GB/T 24349.6-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 6: Dimensions, tolerances and designation of tubes for cross wound packages in winding and twisting 纺织机械与附件 圆柱形筒管 第6部分：卷绕和加捻用交叉卷绕筒管的尺寸、偏差和标记 |
China National Standards Cylindrical |
English PDF |
| GB/T 24349.5-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns 纺织机械与附件 圆柱形筒管 第5部分：合成长丝用筒管的尺寸、偏差和标记 |
China National Standards Cylindrical |
English PDF |
| GB/T 24349.4-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 4: Dimensions, tolerances and designation of tubes for textured yarns 纺织机械与附件 圆柱形筒管 第4部分：变形丝用筒管的尺寸、偏差和标记 |
China National Standards Cylindrical |
English PDF |
| GB/T 24349.3-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 3: Dimensions, tolerances and designation of tubes for tape yarns 纺织机械与附件 圆柱形筒管 第3部分：扁丝用筒管的尺寸、偏差和标记 |
China National Standards Cylindrical |
English PDF |
| GB/T 24349.2-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 2: Dimensions, tolerances and designation of tubes for open-end spinning machines 纺织机械与附件 圆柱形筒管 第2部分：自由端纺纱机用筒管的尺寸、偏差和标记 |
China National Standards Cylindrical |
English PDF |
| GB/T 24349.1-2009 |
Textile machinery and accessories - Cylindrical tubes - Part 1: Recommended main dimensions 纺织机械与附件 圆柱形筒管 第1部分：主要尺寸推荐值 |
China National Standards Cylindrical |
English PDF |
| GB/T 18325.2-2009 |
Plain bearing - Bearing fatigue - Part 2: Test with a Cylindrical specimen of a metallic bearing material 滑动轴承 轴承疲劳 第2部分：金属轴承材料圆柱形试样试验 |
China National Standards Cylindrical |
English PDF |
| GB/T 23778-2009 |
Cylindrical cork stoppers for alcohol and food packaging 酒类及其他食品包装用软木塞 |
China National Standards Cylindrical |
English PDF |
| GB/T 22838.16-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 16: Cigarettes - Determination of loss of tobacco from the ends - Method using a rotating Cylindrical cage 卷烟和滤棒物理性能的测定 第16部分：卷烟 端部掉落烟丝的测定 旋转笼法 |
China National Standards Cylindrical |
English PDF |
| GB/T 23935-2009 |
Design of Cylindrical helical springs 圆柱螺旋弹簧设计计算 |
China National Standards Cylindrical |
English PDF |
| GB/T 2089-2009 |
Cylindrical coiled compression spring dimensions and parameters 普通圆柱螺旋压缩弹簧尺寸及参数（两端圈并紧磨平或制扁） |
China National Standards Cylindrical |
English PDF |
| GB/T 2088-2009 |
Cylindrical coiled tension spring dimensions and parameters 普通圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards Cylindrical |
English PDF |
| GB/T 13828-2009 |
Stranded wire Cylindrical helical springs 多股圆柱螺旋弹簧 |
China National Standards Cylindrical |
English PDF |
| GB/T 1358-2009 |
Cylindrical helical spring seriate sizes 圆柱螺旋弹簧尺寸系列 |
China National Standards Cylindrical |
English PDF |
| GB/T 1357-2008 |
Cylindrical gears for general engineering and for heavy engineering - Modules 通用机械和重型机械用圆柱齿轮 模数 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.9-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 9: Measuring pin 圆柱直齿渐开线花键（米制模数 齿侧配合） 第9部分：量棒 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.8-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 8: 45°pressure angle M and W values 圆柱直齿渐开线花键 （米制模数 齿侧配合） 第8部分：45°压力角 M值和W值 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.7-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 7: 37.5°pressure angle M and W values 圆柱直齿渐开线花键 （米制模数 齿侧配合) 第7部分：37.5°压力角M值和W值 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.6-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 6: 30°pressure angle M and W values 圆柱直齿渐开线花键（米制模数 齿侧配合） 第6部分：30°压力角M值和W值 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.5-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 5: Inspection 圆柱直齿渐开线花键（米制模数 齿侧配合） 第5部分：检验 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.4-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 4: 45°pressure angle dimensions tables 圆柱直齿渐开线花键 （米制模数 齿侧配合） 第4部分：45°压力角尺寸表 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.3-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 3: 37.5°pressure angle dimensions tables 圆柱直齿渐开线花键（米制模数 齿侧配合） 第3部分：37.5°压力角尺寸表 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.2-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 2: 30°pressure angle dimensions tables 圆柱直齿渐开线花键（米制模数 齿侧配合） 第2部分： 30°压力角尺寸表 |
China National Standards Cylindrical |
English PDF |
| GB/T 3478.1-2008 |
Straight Cylindrical involute splines - Metric module, side fit - Part 1: Generalities 圆柱直齿渐开线花键（米制模数 齿侧配合） 第1部分：总论 |
China National Standards Cylindrical |
English PDF |
| GB/T 18842-2008 |
Taper Cylindrical involute splines 圆锥直齿渐开线花键 |
China National Standards Cylindrical |
English PDF |
| GB/T 22076-2008 |
Pneumatic fluid power - Cylindrical quick-action couplings - Plug connecting dimensions, specifications, application guidelines and testing 气动圆柱形快换接头 插头连接尺寸、技术要求、应用指南和试验 |
China National Standards Cylindrical |
English PDF |
| GB/T 7064-2008 |
Specific requirements for Cylindrical rotor synchronous machines 隐极同步发电机技术要求 |
China National Standards Cylindrical |
English PDF |
| GB/T 22131-2008 |
Practice for ultrasonic examination from bored surfaces of Cylindrical forgings 筒形锻件内表面超声波检测方法 |
China National Standards Cylindrical |
English PDF |
| GB/T 971-2008 |
thread rolling Cylindrical dies 滚丝轮 |
China National Standards Cylindrical |
English PDF |
| GB/T 15307-2008 |
Drills with Indexable inserts - Cylindrical shanks with a parallel flat 可转位钻头用削平直柄 |
China National Standards Cylindrical |
English PDF |
| GB/T 15306.2-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 2: Dimensions of inserts with Cylindrical fixing hole 陶瓷可转位刀片 第2部分：带孔刀片尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 13924-2008 |
Inspection code for accuracy of involute Cylindrical gears 渐开线圆柱齿轮精度 检验细则 |
China National Standards Cylindrical |
English PDF |
| GB/T 21663-2008 |
Specific requirements for small capacity Cylindrical rotor synchronous machines in energy save and environment protection projects 小容量节能环保隐极同步发电机技术要求 |
China National Standards Cylindrical |
English PDF |
| GB/T 2861.6-2008 |
Guide unit for stamping dies - Part 6: Cylindrical helical compression springs 冲模导向装置 第6部分：圆柱螺旋压缩弹簧 |
China National Standards Cylindrical |
English PDF |
| GB/T 9867-2008 |
Rubber, vulcanized or thermoplastic-Determination of abrasion resistance using a rotating Cylindrical drum device 硫化橡胶或热塑性橡胶耐磨性能的测定（旋转辊筒式磨耗机法） |
China National Standards Cylindrical |
English PDF |
| GB/Z 18620.4-2008 |
Cylindrical gears - Code of inspection practice - Part 4: Reommendations relative to surface texture and tooth contact pattern checking 圆柱齿轮 检验实施规范 第4部分：表面结构和轮齿接触斑点的检验 |
China National Standards Cylindrical |
English PDF |
| GB/Z 18620.3-2008 |
Cylindrical gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes 圆柱齿轮 检验实施规范 第3部分: 齿轮坯、轴中心距和轴线平行度的检验 |
China National Standards Cylindrical |
English PDF |
| GB/Z 18620.2-2008 |
Cylindrical gears - Code of inspection practice - Part 2: Inspetion related to radial composite deviations,runout, tooth thickness and backlash 圆柱齿轮 检验实施规范 第2部分: 径向综合偏差、径向跳动、齿厚和侧隙的检验 |
China National Standards Cylindrical |
English PDF |
| GB/Z 18620.1-2008 |
Cylindrical gears - Code of inspection practice-Part 1: Inspection of corresponding flanks of gear teeth 圆柱齿轮 检验实施规范 第1部分: 轮齿同侧齿面的检验 |
China National Standards Cylindrical |
English PDF |
| GB/T 10095.2-2008 |
Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information 圆柱齿轮 精度制 第2部分：径向综合偏差与径向跳动的定义和允许值 |
China National Standards Cylindrical |
English PDF |
| GB/T 10095.1-2008 |
Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth 圆柱齿轮 精度制 第1部分：轮齿同侧齿面偏差的定义和允许值 |
China National Standards Cylindrical |
English PDF |
| GB/T 21470-2008 |
Machining allowances and tolerances for steel open die forgings on hammer - Disks, columns, rings and seamless Cylindrical sleeves 锤上钢质自由锻件机械加工余量与公差 盘、柱、环、筒类 |
China National Standards Cylindrical |
English PDF |
| GB/T 21466.3-2008 |
Hydrodynamic plain journal bearings under steady-state conditions - Circular Cylindrical bearings - Part 3: Permissible operational parameters 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第3部分：许用的运行参数 |
China National Standards Cylindrical |
English PDF |
| GB/T 21466.2-2008 |
Hydrodynamic plain journal bearings under steady-state conditions - Circular Cylindrical bearings - Part 2: Functions used in the calculation procedure 稳态条件下流体动压径向滑动轴承 圆形滑动轴承 第2部分：计算过程中所用函数 |
China National Standards Cylindrical |
English PDF |
| GB/T 21466.1-2008 |
Hydrodynamic plain journal bearings under steady-state conditions - Circular Cylindrical bearings -- Part 1: Calculation procedure 稳态条件下流体动压径向滑动轴承 圆柱滑动轴承 第1部分：计算过程 |
China National Standards Cylindrical |
English PDF |
| GB/T 2080-2007 |
Indexable hard material inserts with rounded corners, with partly Cylindrical fixing hole - Dimensions 带圆角沉孔固定的硬质合金可转位刀片尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 2078-2007 |
Indexable hardmetal(carbide) insers with rounded corners, with Cylindrical fixing hole - Dimensions 带圆角圆孔固定的硬质合金可转位刀片尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 6742-2007 |
Paints and varnishes - Bend test (Cylindrical mandrel) 色漆和清漆 弯曲试验(圆柱轴) |
China National Standards Cylindrical |
English PDF |
| GB/T 4685-2007 |
External Cylindrical grinding machines - Testing of the accuracy 外圆磨床 精度检验 |
China National Standards Cylindrical |
English PDF |
| GB/T 4682-2007 |
Internal Cylindrical grinding machines with horizontal spindle - Testing of the accuracy 内圆磨床 精度检验 |
China National Standards Cylindrical |
English PDF |
| GB/T 4681-2007 |
External Cylindrical centreless grinding machines - Testing of the accuracy 无心外圆磨床 精度检验 |
China National Standards Cylindrical |
English PDF |
| GB/T 6138.1-2007 |
Subland twist drills for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with Cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分：直柄阶梯麻花钻的型式和尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 4127.3-2007 |
Bonded abrasive products - Dimensions - Part 3: Grinding wheels for internal Cylindrical grinding 固结磨具 尺寸 第3部分：内圆磨砂轮 |
China National Standards Cylindrical |
English PDF |
| GB/T 4127.2-2007 |
Bonded abrasive products - Dimensions - Part 2: Grinding wheels for centreless external Cylindrical grinding 固结磨具 尺寸 第2部分：无心外圆磨砂轮 |
China National Standards Cylindrical |
English PDF |
| GB/T 4127.1-2007 |
Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external Cylindrical grinding between centres 固结磨具 尺寸 第1部分：外圆磨砂轮（工件装夹在顶尖间） |
China National Standards Cylindrical |
English PDF |
| GB/T 283-2007 |
Rolling bearings - Cylindrical roller bearings - Boundary dimensions 滚动轴承 圆柱滚子轴承 外形尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 6131.4-2006 |
Cylindrical shanks for milling cutters - part 4: Types and sizes of threaded cylindrical shanks 铣刀直柄 第4部分: 螺纹柄的型式和尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 6131.2-2006 |
Cylindrical shanks for milling cutters - part 2: Types and sizes of flatted cylindrical shanks 铣刀直柄 第2部分：削平直柄的型式和尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 6131.1-2006 |
Cylindrical shanks for milling cutters - part 1: Types and sizes of plain cylindrical shanks 铣刀直柄 第1部分：普通直柄的型式和尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 20336-2006 |
Boring bars (tool holders with Cylindrical shank) for indexable inserts - Designation 装可转位刀片的镗刀杆（圆柱形）-代号 |
China National Standards Cylindrical |
English PDF |
| GB/T 20335-2006 |
Boring bars (tool holders with Cylindrical shank) for indexable inserts - Dimensions 装可转位刀片的镗刀杆（圆柱形）-尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 1973.3-2005 |
Small Cylindrically coiled compression spring—Dimensions and parameters 小型圆柱螺旋压缩弹簧尺寸及参数 |
China National Standards Cylindrical |
English PDF |
| GB/T 1973.2-2005 |
Small Cylindrically coiled tension spring—Dimensions and parameters 小型圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards Cylindrical |
English PDF |
| GB/T 1973.1-2005 |
Small Cylindrically coiled springs—Specification 小型圆柱螺旋弹簧技术条件 |
China National Standards Cylindrical |
English PDF |
| GB/T 9217.3-2005 |
Hardmetal burrs--Part 3:Cylindrical round-(ball-)nose burrs(style C) 硬质合金旋转锉 第3部分:圆柱形球头旋转锉（C型） |
China National Standards Cylindrical |
English PDF |
| GB/T 9217.2-2005 |
Hardmetal burrs--Part 2:Cylindrical burrs(style A) 硬质合金旋转锉 第2部分:圆柱形旋转锉（A型） |
China National Standards Cylindrical |
English PDF |
| GB/T 1569-2005 |
Cylindrical shaft ends 圆柱形轴伸 |
China National Standards Cylindrical |
English PDF |
| GB/T 6340-2004 |
Inverse dovetail cutters and dovetail cutters with Cylindrical shanks--Technical specifications 直柄反燕尾槽铣刀和直柄燕尾槽铣刀 技术条件 |
China National Standards Cylindrical |
English PDF |
| GB/T 6338-2004 |
Inverse dovetail cutters and dovetailcutters with Cylindrical shanks 直柄反燕尾槽铣刀和直柄燕尾槽铣刀 |
China National Standards Cylindrical |
English PDF |
| GB/T 19448.8-2004 |
Tool holders with Cylindrical shank--Part 8:Type Z，accessories 圆柱柄刀夹 第8部分:Z型，附件 |
China National Standards Cylindrical |
English PDF |
| GB/T 19448.7-2004 |
Tool holders with Cylindricalshank--Part 7:Type F with taper seat 圆柱柄刀夹 第7部分:装锥柄刀具的F型刀夹 |
China National Standards Cylindrical |
English PDF |
| GB/T 19448.6-2004 |
Tool holders with Cylindrical shank--Part 6:Type E with cylindrical seat 圆柱柄刀夹 第6部分:装圆柱柄刀具的E型刀夹 |
China National Standards Cylindrical |
English PDF |
| GB/T 19448.5-2004 |
Tool holders with Cylindrical shank--Part 5:Type D with more than one rectangular seat 圆柱柄刀夹 第5部分:装一个以上矩形车刀的D型刀夹 |
China National Standards Cylindrical |
English PDF |
| GB/T 19448.4-2004 |
Tool holders with Cylindrical shank--Part 4:Type C with rectangular axial seat 圆柱柄刀夹 第4部分:装轴向矩形车刀的C型刀夹 |
China National Standards Cylindrical |
English PDF |
| GB/T 19448.3-2004 |
Tool holders with Cylindrical shank--Part 3:Type B with rectangular radial seat 圆柱柄刀夹 第3部分:装径向矩形车刀的B型刀夹 |
China National Standards Cylindrical |
English PDF |
| GB/T 19448.2-2004 |
Tool holders with Cylindrical shank--Part 2:Type A，shanks for tool holders of special designs 圆柱柄刀夹 第2部分:制造专用刀夹的A型半成品 |
China National Standards Cylindrical |
English PDF |
| GB/T 19448.1-2004 |
Tool holders with Cylindrical shank--Part 1:Cylin-drical shank，location bore--Technical delivery conditions 圆柱柄刀夹 第1部分:圆柱柄、安装孔----供货技术条件 |
China National Standards Cylindrical |
English PDF |
| GB/Z 6413.2-2003 |
Calculation of scuffing load capacity of Cylindrical，bevel and hypoid gears--Part 2:Integral temperature method 圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第2部分:积分温度法 |
China National Standards Cylindrical |
English PDF |
| GB/Z 6413.1-2003 |
Calculation of scuffing load capacity of Cylindrical，bevel and hypoid gears--Part 1:Flash temperature method 圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第1部分:闪温法 |
China National Standards Cylindrical |
English PDF |
| GB/T 19406-2003 |
Calculation methods of load capacity for involute Cylindrical spur and helical gears--Application for industrical gears 渐开线直齿和斜齿圆柱齿轮承载能力计算方法 工业齿轮应用 |
China National Standards Cylindrical |
English PDF |
| GB/T 4661-2002 |
Rolling bearings--Cylindrical rollers 滚动轴承 圆柱滚子 |
China National Standards Cylindrical |
English PDF |
| GB/T 1115.2-2002 |
Cylindrical cutters--Part 2:The technicalspecifications 圆柱形铣刀 第2部分:技术条件 |
China National Standards Cylindrical |
English PDF |
| GB/T 1115.1-2002 |
Cylindrical cutters--Part 1:The types and dimensions 圆柱形铣刀 第1部分:型式和尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 1356-2001 |
Cylindrical gears for general and heavy engineering--Standard basic rack tooth profile 通用机械和重型机械用圆柱齿轮 标准基本齿条齿廓 |
China National Standards Cylindrical |
English PDF |
| GB/T 17605-1998 |
Petroleum andliquid petroleum products--Volumetric calibration of horizontal Cylindrical metal tanks(Manual methods) 石油和液体石油产品 卧式圆筒形金属油罐容积标定法(手工法) |
China National Standards Cylindrical |
English PDF |
| GB/T 3480-1997 |
Calculation methods of load capacity for involute Cylindrical gears 渐开线圆柱齿轮承载能力计算方法 |
China National Standards Cylindrical |
English PDF |
| GB/T 13235.3-1995 |
Petroleumand liquid petroleum products--Volumetric calibration of vertical Cylindrical metal tanks--Electro-optical distance-ranging internal method 石油和液体石油产品立式圆筒形金属油罐容积标定法(光电内测距法) |
China National Standards Cylindrical |
English PDF |
| GB/T 15753-1995 |
Accuracy of Cylindrical gear with circular-arc toothprofile 圆弧圆柱齿轮精度 |
China National Standards Cylindrical |
English PDF |
| GB/T 4663-1994 |
Rolling bearings--Cylindrical thrust roller bearings--Boundary dimensions 滚动轴承 推力圆柱滚子轴承 外形尺寸 |
China National Standards Cylindrical |
English PDF |
| GB/T 13799-1992 |
Methods of the calculation for load capacity of Cylindrical gear with double-circular-arc tooth profile 双圆弧圆柱齿轮承载能力计算方法 |
China National Standards Cylindrical |
English PDF |
| GB/T 13235.2-1991 |
Petroleum and liquid petroleum products--Volumetric calibration of vertical Cylindrical metal tanks--Optical reference line method 石油和液体石油产品 立式圆筒形金属油罐容积标定法 (光学参比线法) |
China National Standards Cylindrical |
English PDF |
| GB/T 13235.1-1991 |
Petroleum and liquid petroleum products--Volumetric calibration of vertical Cylindrical metal tanks--Strapping method 石油和液体石油产品 立式圆筒形金属油罐容积标定法 (围尺法) |
China National Standards Cylindrical |
English PDF |
| GB/T 12760-1991 |
Cylindrical worm and wormwheel information of the dimensional data to be given on the drawing 圆柱蜗杆、蜗轮图样上应注明的尺寸数据 |
China National Standards Cylindrical |
English PDF |
| GB/T 12759-1991 |
Double-circular-arc tooth profile of basic rack for Cylindrical gears 双圆弧圆柱齿轮基本齿廓 |
China National Standards Cylindrical |
English PDF |
| GB/T 2363-1990 |
Accuracy of fine-pitch involute Cylindrical gears 小模数渐开线圆柱齿轮精度 |
China National Standards Cylindrical |
English PDF |
| GB/T 2362-1990 |
Basic rack tooth profile of fine-pitch involute Cylindrical gears 小模数渐开线圆柱齿轮基本齿廓 |
China National Standards Cylindrical |
English PDF |
| GB/T 1840-1989 |
Modules of Cylindrical gear with circular arc profiles 圆弧圆柱齿轮模数 |
China National Standards Cylindrical |
English PDF |
| GB/T 10227-1988 |
Accuracy of fine-pitch Cylindrical worm and wormwheel 小模数圆柱蜗杆、蜗轮精度 |
China National Standards Cylindrical |
English PDF |
| GB/T 10226-1988 |
Basic rack tooth profile of fine-pitch Cylindrical worm 小模数圆柱蜗杆基本齿廓 |
China National Standards Cylindrical |
English PDF |
| GB/T 10089-1988 |
Accuracy of Cylindrical worm and wormwheel 圆柱蜗杆、蜗轮精度 |
China National Standards Cylindrical |
English PDF |
| GB/T 10088-1988 |
Module and diameter of Cylindrical worm 圆柱蜗杆模数和直径 |
China National Standards Cylindrical |
English PDF |
| GB/T 10087-1988 |
Basic tooth profile of Cylindrical worm 圆柱蜗杆基本齿廓 |
China National Standards Cylindrical |
English PDF |
| GB/T 10086-1988 |
Terminology and symbols for Cylindrical worm and worm wheel 圆柱蜗杆、蜗轮术语及代号 |
China National Standards Cylindrical |
English PDF |
| GB/T 10085-1988 |
Basic parameters of Cylindrical worm gears 圆柱蜗杆传动基本参数 |
China National Standards Cylindrical |
English PDF |
| GB/T 10063-1988 |
Simplified methods for the calculation of load capacity of involute Cylindrical gears for general machines 通用机械渐开线圆柱齿轮 承载能力简化计算方法 |
China National Standards Cylindrical |
English PDF |
| GB/T 6443-1986 |
Involute Cylindrical gears--Information of the dimensional data to be given on the drawing 渐开线圆柱齿轮图样上应注明的尺寸数据 |
China National Standards Cylindrical |
English PDF |
| GB/T 5076-1985 |
Measurement of the dimensionsof a Cylindrical component having two axial terminations 具有两个轴向引出端的圆柱体元件的尺寸测量 |
China National Standards Cylindrical |
English PDF |
| Find out:164Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
