Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 9536.1-2024 |
Electromechanical switches for electrical and electronic equipment-Part 1: General specifications {译} 电气和电子设备用机电开关-第1部分：总规范 |
China National Standards Electromechanical |
 English PDF |
| GB/T 21711.2-2024 |
Basic Electromechanical relays-Part 2-1: Reliability-B10 value verification procedure {译} 基础机电继电器-第2部分：可靠性 |
China National Standards Electromechanical |
English PDF |
| GB/T 14799-2024 |
Basic Electromechanical relays-Part 2: Reliability {译} 土工合成材料-有效孔径的测定-干筛法 |
China National Standards Electromechanical |
English PDF |
| GB/T 42897-2023 |
MicroElectromechanical systems (MEMS) technology Silicon-based MEMS nano-thickness film tensile strength test method {译} 微机电系统（MEMS）技术 硅基MEMS纳米厚度膜抗拉强度试验方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 42896-2023 |
MicroElectromechanical systems (MEMS) technology Silicon-based MEMS nanoscale structure impact test method {译} 微机电系统（MEMS）技术 硅基MEMS纳尺度结构冲击试验方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 42895-2023 |
MicroElectromechanical systems (MEMS) technology Silicon-based MEMS microstructure bending strength test method {译} 微机电系统（MEMS）技术 硅基MEMS微结构弯曲强度试验方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 42709.7-2023 |
Semiconductor devices MicroElectromechanical devices Part 7: MEMS bulk acoustic wave filters and duplexers for radio frequency control and selection {译} 半导体器件 微电子机械器件 第7部分：用于射频控制和选择的MEMS体声波滤波器和双工器 |
China National Standards Electromechanical |
English PDF |
| GB/T 42709.5-2023 |
Semiconductor devices MicroElectromechanical devices Part 5: RF MEMS switches {译} 半导体器件 微电子机械器件 第5部分：射频MEMS开关 |
China National Standards Electromechanical |
English PDF |
| GB/T 16608.1-2023 |
Basic Electromechanical relays for telecommunications with qualification - Part 1: General specification and blank detail specification {译} 有质量评定的电信用基础机电继电器 第1部分：总规范与空白详细规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 21711.1-2023 |
Basic Electromechanical relays - Part 1: General principles and safety requirements {译} 基础机电继电器 第1部分：总则与安全要求 |
China National Standards Electromechanical |
English PDF |
| GB/T 41852-2022 |
Semiconductor devices; microElectromechanical devices; bending and shearing test methods for bonding strength of MEMS structures {译} 半导体器件 微机电器件 MEMS结构黏结强度的弯曲和剪切试验方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2507-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) 电子设备用机电元件 基本试验规程及测量方法 第25-7部分：试验25g：阻抗、反射系数和电压驻波比（VSWR） |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2505-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-5：Test 25e: Return loss 电子设备用机电元件 基本试验规程及测量方法 第25-5部分：试验25e：回波损耗 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2504-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-4: Test 25d: Propagation delay 电子设备用机电元件 基本试验规程及测量方法 第25-4部分：试验25d：传输时延 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2503-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-3: Test 25c: Rise time degradation 电子设备用机电元件 基本试验规程及测量方法 第25-3部分：试验25c：上升时间衰减 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2502-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-2: Test 25b: Attenuation (insertion loss) 电子设备用机电元件 基本试验规程及测量方法 第25-2部分：试验25b：衰减（插入损耗） |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2501-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-1: Test 25a: Crosstalk ratio 电子设备用机电元件 基本试验规程及测量方法 第25-1部分：试验25a：串扰比 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2307-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-7: Screening and filtering tests—Test 23g: Effective transfer impedance of connectors 电子设备用机电元件 基本试验规程及测量方法 第23-7部分：屏蔽和滤波试验 试验23g：连接器的有效转移阻抗 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2304-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-4: Screening and filtering tests—Test 23d: Transmission line reflections in the time domain 电子设备用机电元件 基本试验规程及测量方法 第23-4部分：屏蔽和滤波试验 试验23d：时域内传输线的反射 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2303-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c：Shielding effectiveness of connectors and accessories—Line injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分：屏蔽和滤波试验 试验23c：连接器和附件的屏蔽效果 线注入法 |
China National Standards Electromechanical |
English PDF |
| GB/T 2900.104-2021 |
Electrotechnical terminology—Micro-Electromechanical devices 电工术语 微机电装置 |
China National Standards Electromechanical |
English PDF |
| GB/T 40580-2021 |
Technical guide for modeling HVDC transmission systems in Electromechanical transient simulations 高压直流输电系统机电暂态仿真建模技术导则 |
China National Standards Electromechanical |
English PDF |
| GB/T 14048.4-2020 |
Low-voltage switchgear and controlgear—Part 4-1: Contactors and motor-starters—Electromechanical contactors and motor-starters (Including motor protector) 低压开关设备和控制设备 第4-1部分：接触器和电动机起动器 机电式接触器和电动机起动器（含电动机保护器） |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2509-2020 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-9: Signal integrity tests－Test 25i: Alien crosstalk 电子设备用机电元件 基本试验规程及测量方法 第25-9部分：信号完整性试验 试验25i：外来串扰 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2506-2020 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-6：Test 25f：Eye pattern and jitter 电子设备用机电元件 基本试验规程及测量方法 第25-6部分：试验25f：眼图和抖动 |
China National Standards Electromechanical |
English PDF |
| GB/T 38446-2020 |
Micro-Electromechanical system technology—Test methods for tensile property measurement of strip thin films 微机电系统（MEMS）技术 带状薄膜抗拉性能的试验方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 38447-2020 |
Micro-Electromechanical system technology—Fatigue testing method of MEMS structure using resonant vibration 微机电系统（MEMS）技术 MEMS结构共振疲劳试验方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 38341-2019 |
Micro-Electromechanical system technology—The reliability test methods of MEMS in integrated environments 微机电系统（MEMS）技术 MEMS器件的可靠性综合环境试验方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 37048-2018 |
Technical specification for lightning protection of expressway Electromechanical systems 高速公路机电系统防雷技术规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 21711.7-2018 |
Electromechanical elementary relays—Part 7:Test and measurement procedures 基础机电继电器 第7部分：试验和测量程序 |
China National Standards Electromechanical |
English PDF |
| GB/T 34898-2017 |
Micro Electromechanical system technology—Test method for the nonlinear vibration of the MEMS resonant sensitive element 微机电系统（MEMS）技术 MEMS谐振敏感元件非线性振动测试方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 34894-2017 |
Micro-Electromechanical system technology—Measuring method for strain gradient measurements of MEMS microstructures using an optical interferometer 微机电系统（MEMS）技术 基于光学干涉的MEMS微结构应变梯度测量方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 34900-2017 |
Micro-Electromechanical system technology—Measuring method for residual strain measurements of MEMS microstructures using an optical interferometer 微机电系统（MEMS）技术 基于光学干涉的MEMS微结构残余应变测量方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 14048.5-2017 |
Low-voltage switchgear and controlgear—Part 5-1: Control circuit devices and switching element—Electromechanical control circuit devices 低压开关设备和控制设备 第5-1部分：控制电路电器和开关元件 机电式控制电路电器 |
China National Standards Electromechanical |
English PDF |
| GB/T 34893-2017 |
Micro-Electromechanical system technology—Measuring method for in-plane length measurements of MEMS microstructures using an optical interferometer 微机电系统（MEMS）技术 基于光学干涉的MEMS微结构面内长度测量方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 34899-2017 |
Micro-Electromechanical system technology—Measuring method of microstructure surface stress based on Raman spectroscopy 微机电系统（MEMS）技术 基于拉曼光谱法的微结构表面应力测试方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 17215.821-2017 |
Electricity metering equipment (AC)—Acceptance inspection—Part 21: Particular requirements for Electromechanical meters for active energy (classes 0.5, 1 and 2) 交流电测量设备 验收检验 第21部分：机电式有功电能表的特殊要求(0.5级、1级和2级) |
China National Standards Electromechanical |
English PDF |
| GB/T 35553-2017 |
Energy conservation requirements for Electromechanical equipment of urban rail transit 城市轨道交通机电设备节能要求 |
China National Standards Electromechanical |
English PDF |
| GB/T 32817-2016 |
Semiconductor devices—Micro-Electromechanical devices—Generic specification for MEMS 半导体器件 微机电器件 MEMS总规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 18110-2016 |
Electromechanical equipment guide for small hydroelectric installations 小型水电站机电设备导则 |
China National Standards Electromechanical |
English PDF |
| GB/T 17885-2016 |
Electromechanical contactors for household and similar purposes 家用及类似用途机电式接触器 |
China National Standards Electromechanical |
English PDF |
| GB/T 4210-2015 |
Electrotechnical terminology—Electromechanical components for electronic equipment 电工术语 电子设备用机电元件 |
China National Standards Electromechanical |
English PDF |
| GB/T 16608.55-2012 |
Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11mm×7,5mm (max)base 有或无机电继电器 第55部分：空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点，11mm×7.5mm(最大)底座 |
China National Standards Electromechanical |
English PDF |
| GB/T 16608.54-2012 |
Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15mm×7,5mm base 有或无机电继电器 第54部分：空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点，15mm×7.5mm底座 |
China National Standards Electromechanical |
English PDF |
| GB/T 16608.53-2012 |
Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14mm×9mm base 有或无机电继电器 第53部分：空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点，14mm×9mm底座 |
China National Standards Electromechanical |
English PDF |
| GB/T 16608.52-2012 |
Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20mm×10mm base 有或无机电继电器 第52部分：空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点，20mm×10mm底座 |
China National Standards Electromechanical |
English PDF |
| GB/T 16608.51-2012 |
Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction 有或无机电继电器 第51部分：空白详细规范 电信用有质量评定的有或无机电继电器 非标准类型和结构 |
China National Standards Electromechanical |
English PDF |
| GB/T 16608.50-2012 |
Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality 有或无机电继电器 第50部分：分规范 电信用有质量评定的有或无机电继电器 |
China National Standards Electromechanical |
English PDF |
| GB/T 9536-2012 |
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification 电气和电子设备用机电开关 第1部分：总规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 26852-2011 |
Requirements concerning the interoperability between Electromechanical and electrical applications in CAx-systems CAx系统中机电和电气应用之间的互操作要求 |
China National Standards Electromechanical |
English PDF |
| GB/T 26113-2010 |
Micro-Electromechanical system technology - General rules for the assessment of micro-geometrical parameters 微机电系统（MEMS）技术 微几何量评定总则 |
China National Standards Electromechanical |
English PDF |
| GB/T 26112-2010 |
Micro-Electromechanical system technology - General rules for the assessment of micro-mechanical parameters 微机电系统（MEMS）技术 微机械量评定总则 |
China National Standards Electromechanical |
English PDF |
| GB/T 26111-2010 |
Micro-Electromechanical system technology - Terms 微机电系统（MEMS）技术 术语 |
China National Standards Electromechanical |
English PDF |
| GB/T 50658-2011 |
Standard for preparing design document of construction project of Electromechanical equipment repair plant in mining area of coal industry 煤炭工业矿区机电设备修理厂工程建设项目设计文件编制标准 |
China National Standards Electromechanical |
English PDF |
| GB 14048.4-2010 |
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Including motor protector) 低压开关设备和控制设备 第4-1部分：接触器和电动机起动器 机电式接触器和电动机起动器（含电动机保护器） |
China National Standards Electromechanical |
English PDF |
| GB/T 25363-2010 |
Electromechanical solenoid fuel injector assemblies of gasoline engines - Testing methods 汽油机电磁阀式喷油器总成 试验方法 |
China National Standards Electromechanical |
English PDF |
| GB/T 25362-2010 |
Electromechanical solenoid fuel injector assemblies of gasoline engines - Technical requirements 汽油机电磁阀式喷油器总成 技术条件 |
China National Standards Electromechanical |
English PDF |
| GB 17885-2009 |
Electromechanical contactors for household and similar purposes 家用及类似用途机电式接触器 |
China National Standards Electromechanical |
English PDF |
| GB/T 17215.311-2008 |
Electricity metering equipment(a.c) - Particular Requirements - Part 11: Electromechanical meter for active energy(classes0.5、1and2) 交流电测量设备 特殊要求 第11部分：机电式有功电能表（0.5、1和2级） |
China National Standards Electromechanical |
English PDF |
| GB 14048.5-2008 |
Low-voltage switchgear and controlgear - Part 5-1:Control circuit devices and switching element - Electromechanical control circuit devices 低压开关设备和控制设备 第5-1部分：控制电路电器和开关元件 机电式控制电路电器 |
China National Standards Electromechanical |
English PDF |
| GB/T 21711.1-2008 |
Electromechanical elementary relays - Part 1: General and safety requirements 基础机电继电器 第1部分：总则与安全要求 |
China National Standards Electromechanical |
English PDF |
| GB/T 16514.2-2005 |
Electromechanical switches for use in electronic equipment Part 5:Sectional specification for pushbutton switches Section 1-Blank detail specification 电子设备用机电开关 第5-1部分：按钮开关 空白详细规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 18496.2-2005 |
Electromechanical switches for use in electronic equipment Part 4-1:Sectional specification for lever(toggle)switches Blank detail specification 电子设备用机电开关 第4-1部分:钮子(倒扳)开关 空白详细规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 16608.1-2003 |
Electromechanical elementary all-or-nothing relays of assessed quality--Part 1:Generic specification 有质量评定的有或无基础机电继电器 第1部分:总规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 18496-2001 |
Electromechanical switches for use in electronic equipment--Part 4:Sectional specification for lever(toggle) switches 电子设备用机电开关 第4部分:钮子(倒扳)开关分规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 18110-2000 |
Electromechanical equipment guide for small hydroelectric installations 小水电站机电设备导则 |
China National Standards Electromechanical |
English PDF |
| GB/T 13420-1998 |
Electromechanical switches for use in electronic equipment--Part 6:Sectional specification for sensitive switches--Section 1:Blank detail specification 电子设备用机电开关 第6部分:微动开关分规范 第1篇:空白详细规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 13419-1998 |
Electromechanical switches for use in electronic equipment--Part 6:Sectional specification for sensitive switches 电子设备用机电开关 第6部分:微动开关分规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 17210-1998 |
Electromechanical switches for use in electronic equipment--Part 2:Sectional specification for rotary switches--Sectional 1:Blank detail specification 电子设备用机电开关 第2部分:旋转开关分规范 第一篇 空白详细规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 17209-1998 |
Electromechanical switches for use in electronic equipment--Part 2:Sectional specification for rotary switches 电子设备用机电开关 第2部分:旋转开关分规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.9-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 9:Miscellaneous tests 电子设备用机电元件 基本试验规程及测量方法 第9部分:杂项试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.8-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 8:Connector tests(mechanical)and mechanical tests on contacts and terminations 电子设备用机电元件 基本试验规程及测量方法 第8部分:连接器、接触件及引出端的机械试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.7-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 7:Mechanical operating tests and sealing tests 电子设备用机电元件 基本试验规程及测量方法 第7部分:机械操作试验和密封性试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.6-1997 |
Electromechanical components for electronic equipment--Basic testing proceduresand measuring methods--Part 6:Climatic tests and soldering tests 电子设备用机电元件 基本试验规程及测量方法 第6部分:气候试验和锡焊试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.5-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 5:Impact tests(free components)，static load tests(fixed components)，endurance tests and overload tests 电子设备用机电元件 基本试验规程及测量方法 第5部分:撞击试验(自由元件)、静负荷试验(固定元件)、寿命试验和过负荷试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.4-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 4:Dynamic stress tests 电子设备用机电元件 基本试验规程及测量方法 第4部分:动态应力试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.3-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 3:Current-carrying capacity tests 电子设备用机电元件 基本试验规程及测量方法 第3部分:载流容量试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.2-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 2:Generalexamination，electrical continuity and contact resistance tests，insulationtests and voltage stress tests 电子设备用机电元件 基本试验规程及测量方法 第2部分:一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.15-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 15:Mechanical tests on contacts and terminations--Section 8:Test 15h--Contact retention system resistance to tool application 电子设备用机电元件 基本试验规程及测量方法 第15部分:接触件和引出端的机械试验 第八篇:试验15h接触件固定机构耐工具使用性 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.12-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 12:Soldering tests--Section 6:Test 12f--Sealing against flux and cleaning solvents inmachine soldering 电子设备用机电元件 基本试验规程及测量方法 第12部分:锡焊试验 第六篇:试验12f在机器焊接中封焊处耐焊剂和清洁剂 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.1-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuringmethods--Part 1:General 电子设备用机电元件 基本试验规程及测量方法 第1部分:总则 |
China National Standards Electromechanical |
English PDF |
| GB/T 5095.11-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 11:Climatic tests 电子设备用机电元件 基本试验规程及测量方法 第11部分:气候试验 |
China National Standards Electromechanical |
English PDF |
| GB/T 16514-1996 |
Electromechanical switches for use in electronic equipment--Part 5:Sectional specification for pushbutton switches 电子设备用机电开关 第5部分:按钮开关分规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 15462-1995 |
Electromechanical switches for use in electronic equipments--Part 3-1:Blank detail specification for in-line package switches 电子设备用机电开关 第3-1部分:成列直插封装式开关 空白详细规范 |
China National Standards Electromechanical |
English PDF |
| GB/T 15461-1995 |
Electromechanicalswitches for use in electronic equipments--Part 3:Sectional specification for in-line package switches 电子设备用机电开关 第3部分:成列直插封装式开关分规范 |
China National Standards Electromechanical |
English PDF |
| Find out:85Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
