Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 17737.11-2024 |
Coaxial communication cables - Part 11: Sectional specification for polyEthylene insulated semi-rigid cables {译} 同轴通信电缆-第11部分：聚乙烯绝缘半硬电缆分规范 |
China National Standards Ethylene |
 English PDF |
| GB/T 43922-2024 |
Inspection and evaluation of in-service polyEthylene gas pipelines {译} 在役聚乙烯燃气管道检验与评价 |
China National Standards Ethylene |
English PDF |
| GB/T 33285.2-2024 |
Leather and fur - Determination of alkylphenols and alkylphenol polyoxyEthylene ethers - Part 2: Indirect method {译} 皮革和毛皮-烷基酚及烷基酚聚氧乙烯醚的测定-第2部分：间接法 |
China National Standards Ethylene |
English PDF |
| GB/T 28799.4-2024 |
Heat-resistant polyEthylene (PE-RT) piping systems for hot and cold water-Part 4: Valves {译} 冷热水用耐热聚乙烯（PE-RT）管道系统-第4部分：阀门 |
China National Standards Ethylene |
English PDF |
| GB/T 43730-2024 |
Industrial water quota-Part 13: Ethylene and propylene {译} 食品生产数据管理技术规范 |
China National Standards Ethylene |
English PDF |
| GB 29436-2023 |
Energy consumption limit per unit product for methanol, Ethylene glycol and dimethyl ether {译} 甲醇、乙二醇和二甲醚单位产品能源消耗限额 |
China National Standards Ethylene |
English PDF |
| GB/T 3394-2023 |
Determination of trace amounts of carbon monoxide, carbon dioxide and acetylene in Ethylene and propylene for industrial use - Gas chromatography {译} 工业用乙烯、丙烯中微量一氧化碳、二氧化碳和乙炔的测定 气相色谱法 |
China National Standards Ethylene |
English PDF |
| GB/T 15558.5-2023 |
Buried polyEthylene (PE) piping systems for gas use Part 5: System suitability {译} 燃气用埋地聚乙烯（PE）管道系统 第5部分：系统适用性 |
China National Standards Ethylene |
English PDF |
| GB/T 15558.4-2023 |
Buried polyEthylene (PE) piping systems for gas use Part 4: Valves {译} 燃气用埋地聚乙烯（PE）管道系统 第4部分：阀门 |
China National Standards Ethylene |
English PDF |
| GB/T 15558.3-2023 |
Buried polyEthylene (PE) piping systems for gas use Part 3: Pipe fittings {译} 燃气用埋地聚乙烯（PE）管道系统 第3部分：管件 |
China National Standards Ethylene |
English PDF |
| GB/T 15558.2-2023 |
Buried polyEthylene (PE) piping systems for gas use Part 2: Pipes {译} 燃气用埋地聚乙烯（PE）管道系统 第2部分：管材 |
China National Standards Ethylene |
English PDF |
| GB/T 15558.1-2023 |
Buried polyEthylene (PE) piping systems for gas use Part 1: General principles {译} 燃气用埋地聚乙烯（PE）管道系统 第1部分：总则 |
China National Standards Ethylene |
English PDF |
| GB/T 21461.2-2023 |
Plastics Ultra-high molecular weight polyEthylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Ethylene |
English PDF |
| GB/T 21461.1-2023 |
Plastics Ultra-high molecular weight polyEthylene (PE-UHMW) molding and extrusion materials Part 1: Nomenclature system and basis for classification {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Ethylene |
English PDF |
| GB 1886.302-2021 |
National Food Safety Standards Food Additives PolyEthylene Glycol {译} 食品安全国家标准 食品添加剂 聚乙二醇 |
China National Standards Ethylene |
English PDF |
| GB 18279-2023 |
Sterilization of healthcare products Ethylene oxide Requirements for the development, validation and routine control of medical device sterilization processes {译} 医疗保健产品灭菌 环氧乙烷 医疗器械灭菌过程的开发、确认和常规控制要求 |
China National Standards Ethylene |
English PDF |
| GB/T 43198-2023 |
PolyEthylene blow molded containers for food packaging {译} 食品包装用聚乙烯吹塑容器 |
China National Standards Ethylene |
English PDF |
| GB/T 43005-2023 |
Continuous fiberglass tape wrapped reinforced polyEthylene composite pipe for water supply {译} 给水用连续玻纤带缠绕增强聚乙烯复合管 |
China National Standards Ethylene |
English PDF |
| GB/T 42921-2023 |
Optical functional film PolyEthylene terephthalate (PET) film Protective film adhesion measurement method {译} 光学功能薄膜 聚对苯二甲酸乙二醇酯（PET）薄膜 保护膜黏着力测定方法 |
China National Standards Ethylene |
English PDF |
| GB/T 42948-2023 |
Daily protective polyEthylene gloves {译} 日用防护聚乙烯手套 |
China National Standards Ethylene |
English PDF |
| GB/T 11060.2-2023 |
Natural gas - Determination of sulfur compounds - Part 2: Determination of hydrogen sulfide content by the mEthylene blue method {译} 天然气 含硫化合物的测定 第2部分：用亚甲蓝法测定硫化氢含量 |
China National Standards Ethylene |
English PDF |
| GB/T 19812.6-2022 |
Plastic water-saving irrigation equipment - Part 6: PolyEthylene (PE) pipes for water delivery {译} 塑料节水灌溉器材 第6部分：输水用聚乙烯（PE）管材 |
China National Standards Ethylene |
English PDF |
| GB/T 14571.3-2022 |
Test methods for Ethylene glycol for industrial use - Part 3: Determination of aldehyde content {译} 工业用乙二醇试验方法 第3部分：醛含量的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 26255-2022 |
Steel plastic conversion fittings of polyEthylene (PE) pipeline system for gas {译} 燃气用聚乙烯（PE）管道系统的钢塑转换管件 |
China National Standards Ethylene |
English PDF |
| GB/T 25254-2022 |
PolytetramEthylene ether glycol (PTMEG) for industrial use {译} 工业用聚四亚甲基醚二醇(PTMEG) |
China National Standards Ethylene |
English PDF |
| GB/T 14571.4-2022 |
Test methods for Ethylene glycol for industrial use Part 4: Determination of ultraviolet transmittance ultraviolet spectrophotometric method {译} 工业用乙二醇试验方法 第4部分：紫外透光率的测定 紫外分光光度法 |
China National Standards Ethylene |
English PDF |
| GB/T 29461-2012 |
No. 1 Amendment List for Ultrasonic Testing of PolyEthylene Pipeline Electrofusion Joints {译} 聚乙烯管道电熔接头超声检测《第1号修改单》 |
China National Standards Ethylene |
English PDF |
| GB/T 17737.8-2022 |
Coaxial communication cables—Part 8: Sectional specification for semi-flexible cables with polytetrafluoroEthylene (PTFE) dielectric 同轴通信电缆 第8部分：聚四氟乙烯绝缘半柔电缆分规范 |
China National Standards Ethylene |
English PDF |
| GB/T 17737.801-2022 |
Coaxial communication cables—Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroEthylene (PTFE) dielectric 同轴通信电缆 第8-1部分：聚四氟乙烯绝缘半柔电缆空白详细规范 |
China National Standards Ethylene |
English PDF |
| GB/T 3396-2022 |
Determination of trace oxygen in Ethylene and propylene for industrial use - Electrochemical method {译} 工业用乙烯、丙烯中微量氧的测定 电化学法 |
China National Standards Ethylene |
English PDF |
| GB/T 42268-2022 |
Ethylene-propylene-diene rubber (EPDM) evaluation method {译} 乙烯-丙烯-二烯烃橡胶(EPDM) 评价方法 |
China National Standards Ethylene |
English PDF |
| GB/T 41926-2022 |
Plastics - Determination of 1,2-Ethylene glycol content in epoxy resins {译} 塑料 环氧树脂 1,2-乙二醇含量的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 41791-2022 |
Plastics Films and sheets Non-oriented polyEthylene terephthalate (PET) sheet {译} 塑料制品 薄膜和薄片 无取向聚对苯二甲酸乙二醇酯（PET）片材 |
China National Standards Ethylene |
English PDF |
| GB/T 41877.1-2022 |
Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Ethylene |
English PDF |
| GB/T 41877.2-2022 |
Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Ethylene |
English PDF |
| GB/T 40402-2021 |
Pre-insulated composite plastic pipes with polyEthylene casing 聚乙烯外护管预制保温复合塑料管 |
China National Standards Ethylene |
English PDF |
| GB/T 40351-2021 |
Ecological technical requirements for recycled Poly(Ethylene terephthalate) fiber 循环再利用涤纶生态技术要求 |
China National Standards Ethylene |
English PDF |
| GB/T 29047-2021 |
Prefabricated directly buried insulating pipes and fittings with polyurethane foamed-plastics and high density polyEthylene casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 |
China National Standards Ethylene |
English PDF |
| GB/T 1845.2-2021 |
Plastics—PolyEthylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Ethylene |
English PDF |
| GB/T 40006.2-2021 |
Plastics—Recycled plastics—Part 2:PolyEthylene(PE) materials 塑料 再生塑料 第2部分：聚乙烯(PE)材料 |
China National Standards Ethylene |
English PDF |
| GB/T 22114-2021 |
Humectants for toothpastes - Glycerin and polyEthylene glycol 牙膏用保湿剂 甘油和聚乙二醇 |
China National Standards Ethylene |
English PDF |
| GB/T 40169-2021 |
Compression-moulded plates of ultra-high-molecular-weight polyEthylene(PE-UHMW)and high density polyethylene (PE-HD) 超高分子量聚乙烯（PE-UHMW）和高密度聚乙烯（PE-HD）模塑板材 |
China National Standards Ethylene |
English PDF |
| GB/T 39882-2021 |
Examination methods for mEthylene dioxymetham phetamine in suspected drugs -- Gas chromatography and gas chromatography-mass spectrometry 疑似毒品中二亚甲基双氧安非他明检验 气相色谱和气相色谱-质谱法 |
China National Standards Ethylene |
English PDF |
| GB/T 39827.2-2021 |
Plastics -- Post-consumer poly(Ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards Ethylene |
English PDF |
| GB/T 39827.1-2021 |
Plastics -- Post-consumer poly(Ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第1部分：命名系统和分类基础 |
China National Standards Ethylene |
English PDF |
| GB/T 41003.1-2021 |
General technical specification for plastic foam mats—Part 1:PolyEthylene/ethylene vinylacetate copolymer foam mats for children 塑料泡沫垫通用技术条件 第1部分：聚乙烯/乙烯-醋酸乙烯酯共聚物儿童泡沫垫 |
China National Standards Ethylene |
English PDF |
| GB/T 41167-2021 |
General requirements for polyEthylene terephthalate(PET) bottle for drinks 聚对苯二甲酸乙二醇酯(PET)饮品瓶通用技术要求 |
China National Standards Ethylene |
English PDF |
| GB/T 40967-2021 |
PolyEthylene(PE)pipes and fittings for nuclear power plants 核电厂用聚乙烯（PE）管材及管件 |
China National Standards Ethylene |
English PDF |
| GB/T 40919-2021 |
PolyEthylene materials for piping systems—Determination of Strain Hardening Modulus in relation to slow crack growth 管道系统用聚乙烯材料 与慢速裂纹增长相关的应变硬化模量的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 40896-2021 |
Determination of diEthylene glycol monoethyl ether in cosmetics—Gas chromatography mass spectrometry 化妆品中二乙二醇单乙醚的测定 气相色谱-质谱法 |
China National Standards Ethylene |
English PDF |
| GB/T 40897-2021 |
Determination of alkali sulfides and alkaline earth sulfides in cosmetics—MEthylene blue spectrophotometric method 化妆品中碱金属硫化物和碱土金属硫化物的测定 亚甲基蓝分光光度法 |
China National Standards Ethylene |
English PDF |
| GB/T 40006.9-2021 |
Plastics—Recycled plastics—Part 9:Poly(Ethylene terephthalate) (PET) materials 塑料 再生塑料 第9部分：聚对苯二甲酸乙二醇酯(PET)材料 |
China National Standards Ethylene |
English PDF |
| GB/T 40907-2021 |
Methods for the determination of prohibited substances in furniture products and related materials -- 2, 4-diaminotoluene and 4, 4'-mEthylenedianiline 家具产品及其材料中禁限用物质测定方法? 2,4-二氨基甲苯、4，4’-二氨基二苯甲烷 |
China National Standards Ethylene |
English PDF |
| GB/T 40872-2021 |
Plastics—Test methods of polyEthylene cellular 塑料 聚乙烯泡沫试验方法 |
China National Standards Ethylene |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- PolyoxymEthylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Ethylene |
English PDF |
| GB/T 22271.1-2021 |
Plastics -- PolyoxymEthylene(POM) moulding and extrusion materials -- Part 1: Designation system and basis for specification 塑料 聚甲醛（POM）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Ethylene |
English PDF |
| GB/T 39199-2020 |
Characterization and testing methods of recycled polyEthylene (PE) 聚乙烯（PE）塑料再生料的表征特性及检测方法 |
China National Standards Ethylene |
English PDF |
| GB/T 39026-2020 |
Test method for the identification of recycled polyEthylene terephthalate (PET) fiber 循环再利用聚酯（PET）纤维鉴别方法 |
China National Standards Ethylene |
English PDF |
| GB/T 38592-2020 |
Determination of 4,4’-mEthylene-bis(2-chloroaniline) in textile dyeing and finishing auxiliaries 纺织染整助剂产品中4,4’-亚甲基双(2-氯苯胺)的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 39714.2-2020 |
Plastics—PolytetrafluoroEthylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 |
China National Standards Ethylene |
English PDF |
| GB/T 39714.1-2020 |
Plastics—PolytetrafluoroEthylene(PTFE) semi-finished products—Part 1:Requirements and designation 塑料 聚四氟乙烯(PTFE)半成品 第1部分：要求和命名 |
China National Standards Ethylene |
English PDF |
| GB/T 39690.2-2020 |
Plastics—Mixtures of polypropylene (PP) and polyEthylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 |
China National Standards Ethylene |
English PDF |
| GB/T 39690.1-2020 |
Plastics—Mixtures of polypropylene (PP) and polyEthylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 1: Designation system and basis for specification 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第1部分： 命名系统和分类基础 |
China National Standards Ethylene |
English PDF |
| GB/T 28799.5-2020 |
PolyEthylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 5： Fitness for purpose of the system 冷热水用耐热聚乙烯(PE-RT)管道系统 第5部分：系统适用性 |
China National Standards Ethylene |
English PDF |
| GB/T 28799.3-2020 |
PolyEthylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 3: Fittings 冷热水用耐热聚乙烯(PE-RT)管道系统 第3部分：管件 |
China National Standards Ethylene |
English PDF |
| GB/T 28799.2-2020 |
PolyEthylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 2: Pipes 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分：管材 |
China National Standards Ethylene |
English PDF |
| GB/T 28799.1-2020 |
PolyEthylene of raised temperature resistance（PE-RT）piping systems for hot and cold water installations—Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分：总则 |
China National Standards Ethylene |
English PDF |
| GB/T 20674.4-2020 |
Plastics pipes and fittings—Equipment for fusion jointing polyEthylene systems—Part 4: Traceability coding 塑料管材和管件 聚乙烯系统熔接设备 第4部分：可追溯编码 |
China National Standards Ethylene |
English PDF |
| GB/T 20674.3-2020 |
Plastics pipes and fittings—Equipment for fusion jointing polyEthylene systems—Part 3:Operator's badge 塑料管材和管件 聚乙烯系统熔接设备 第3部分：操作者代码 |
China National Standards Ethylene |
English PDF |
| GB/T 20674.2-2020 |
Plastics pipes and fittings—Equipment for fusion jointing polyEthylene systems—Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 |
China National Standards Ethylene |
English PDF |
| GB/T 20674.1-2020 |
Plastics pipes and fittings—Equipment for fusion jointing polyEthylene systems—Part 1:Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 |
China National Standards Ethylene |
English PDF |
| GB/T 39302-2020 |
Reclaimed water quality—Determination of anionic surfactants—MEthylene blue spectrophotometric method 再生水水质 阴离子表面活性剂的测定 亚甲蓝分光光度法 |
China National Standards Ethylene |
English PDF |
| GB/T 39246-2020 |
Prefabricated directly buried insulating fittings with seamless high density polyEthylene casing pipe 高密度聚乙烯无缝外护管预制直埋保温管件 |
China National Standards Ethylene |
English PDF |
| GB/T 20202-2019 |
Ethylene-vinyl acetate copolymer (EVA) blown covering film for agriculture 农业用乙烯-乙酸乙烯酯共聚物（EVA）吹塑棚膜 |
China National Standards Ethylene |
English PDF |
| GB/T 38286-2019 |
PolyEthylene(PE)，polypropylene(PP) and polystyrene(PS) resin―Determination of peroxide value 聚乙烯、聚丙烯、聚苯乙烯树脂 过氧化值的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 4455-2019 |
PolyEthylene blown covering film for agriculture 农业用聚乙烯吹塑棚膜 |
China National Standards Ethylene |
English PDF |
| GB/T 38286-2019 |
PolyEthylene(PE)，polypropylene(PP) and polystyrene(PS) resin―Determination of peroxide value 聚乙烯、聚丙烯、聚苯乙烯树脂 过氧化值的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 4455-2019 |
PolyEthylene blown covering film for agriculture 农业用聚乙烯吹塑棚膜 |
China National Standards Ethylene |
English PDF |
| GB/T 37838-2019 |
Pulp—Determination of dynamic viscosity number in cupri-Ethylenediamine(CED) solution 纸浆 铜乙二胺(CED)溶液动力粘度的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 20202-2019 |
Ethylene-vinyl acetate copolymer (EVA) blown covering film for agriculture 农业用乙烯-乙酸乙烯酯共聚物（EVA）吹塑棚膜 |
China National Standards Ethylene |
English PDF |
| GB/T 19472.1-2019 |
PolyEthylene structure wall pipeline system for underground usage—Part 1: Polyethylene double wall corrugated pipes 埋地用聚乙烯（PE）结构壁管道系统 第1部分：聚乙烯双壁波纹管材 |
China National Standards Ethylene |
English PDF |
| GB/T 37587-2019 |
Technical specification for corrosion resistance of buried steel bend pipe polyEthylene anti-corrosion tapes 埋地钢质弯管聚乙烯防腐带耐蚀作业技术规范 |
China National Standards Ethylene |
English PDF |
| GB/T 37580-2019 |
Requirements for buried polyEthylene（PE） gas pipeline corrosion control engineering life cycle 聚乙烯（PE）埋地燃气管道腐蚀控制工程全生命周期要求 |
China National Standards Ethylene |
English PDF |
| GB/T 37557-2019 |
DiEthylenetriamine 二乙烯三胺 |
China National Standards Ethylene |
English PDF |
| GB/T 37633-2019 |
Textiles―Determination of 1,2-dichloroethane,Ethylene chlorohydrin and chloroacetic acid 纺织品 1,2-二氯乙烷、氯乙醇和氯乙酸的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 37042-2018 |
HexamEthylene diisocyanate 六亚甲基二异氰酸酯 |
China National Standards Ethylene |
English PDF |
| GB/T 19812.4-2018 |
Plastic equipment for water saving irrigation—Part 4：PolyEthylene (PE) flexible pipe 塑料节水灌溉器材-第4部分:-聚乙烯(PE)软管 |
China National Standards Ethylene |
English PDF |
| GB/T 36948-2018 |
Fibre ropes for offshore stantionkeeping—High modulus polyEthylene（HMPE） 海洋平台定位系泊纤维绳-高模量聚乙烯（HMPE） |
China National Standards Ethylene |
English PDF |
| GB/T 36965-2018 |
Test method for cross-linking degree of Ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC） 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 |
China National Standards Ethylene |
English PDF |
| GB/T 29848-2018 |
Ethylene-vinyl acetate copolymer (EVA) film for PV module 光伏组件封装用乙烯-醋酸乙烯酯共聚物(EVA)胶膜 |
China National Standards Ethylene |
English PDF |
| GB/T 37197-2018 |
Ethylene-vinyl acetate resin 乙烯-乙酸乙烯酯(EVAC)树脂 |
China National Standards Ethylene |
English PDF |
| GB/T 17931-2018 |
Poly(Ethylene terephthalate) (PET) resin for bottles 瓶用聚对苯二甲酸乙二酯（PET）树脂 |
China National Standards Ethylene |
English PDF |
| GB/T 37193-2018 |
Optical functional films—PolyEthylene terephthalate（PET) film—Determination of extraction rate 光学功能薄膜-聚对苯二甲酸乙二醇酯（PET）薄膜-萃取率测定方法 |
China National Standards Ethylene |
English PDF |
| GB/T 37263-2018 |
Prefabricated directly buried insulating plastic-steel-plastic composite pipes with polyurethane [PUR]foamed-plastics and high density polyEthylene [PE]casing pipes 高密度聚乙烯外护管聚氨酯发泡预制直埋保温钢塑复合管 |
China National Standards Ethylene |
English PDF |
| GB 1886.298-2018 |
National Food Safety Standard - Food Additives - Polyoxypropylene Ethylene Oxide Glycerol Ether 食品安全国家标准-食品添加剂-聚氧丙烯氧化乙烯甘油醚 |
China National Standards Ethylene |
English PDF |
| GB/T 18916.36-2018 |
Norm of water intake—Part 36: Ethylene glycol produced with coal as raw material 取水定额 第36部分：煤制乙二醇 |
China National Standards Ethylene |
English PDF |
| GB/T 36289.1-2018 |
Insulating films of crystalline silicon photovoltaic(PV) modules—Part 1：PolyEthylene terephthalate films 晶体硅太阳电池组件用绝缘薄膜 第1部分：聚酯薄膜 |
China National Standards Ethylene |
English PDF |
| GB/T 36761-2018 |
Ethylenediamine for industrial use 工业用乙二胺 |
China National Standards Ethylene |
English PDF |
| GB/T 35859-2018 |
Determination of Ethylene glycol monoethyl ether insoluble contents in polymer materials for offset printing plates—Filtering method 胶印版材用高聚物中乙二醇单乙醚不溶物含量的测定 过滤法 |
China National Standards Ethylene |
English PDF |
| GB/T 13663.3-2018 |
PolyEthylene(PE)piping systems for water supply—Part 3: Fittings 给水用聚乙烯（PE）管道系统 第3部分：管件 |
China National Standards Ethylene |
English PDF |
| GB/T 13663.5-2018 |
PolyEthylene (PE) piping systems for water supply—Part 5: Fitness for purpose of the system 给水用聚乙烯（PE）管道系统 第5部分：系统适用性 |
China National Standards Ethylene |
English PDF |
| GB/T 13663.2-2018 |
PolyEthylene(PE) piping systems for water supply—Part2: Pipes 给水用聚乙烯（PE）管道系统 第2部分：管材 |
China National Standards Ethylene |
English PDF |
| GB/T 14571.2-2018 |
Test method of Ethylene glycol for industrial use—Part 2: Determination of purity and impurities—Gas chromatography 工业用乙二醇试验方法 第2部分：纯度和杂质的测定 气相色谱法 |
China National Standards Ethylene |
English PDF |
| GB/T 36118-2018 |
Filter elementsof pleated polytetrafluoroEthylene microfiltration membrane for gas sterilizing 气体除菌用聚四氟乙烯微滤膜折叠式过滤芯 |
China National Standards Ethylene |
English PDF |
| GB/T 36172-2018 |
PolyEthylene sleeving of ductile iron pipelines for site application 现场安装聚乙烯套球墨铸铁管线 |
China National Standards Ethylene |
English PDF |
| GB/T 36138-2018 |
Flat-plate microfiltration membrane of polytetrafluoroEthylene for sterilizing 除菌用聚四氟乙烯平板式微滤膜 |
China National Standards Ethylene |
English PDF |
| GB/T 4649-2018 |
Ethylene glycol for industrial use 工业用乙二醇 |
China National Standards Ethylene |
English PDF |
| GB/T 34847-2017 |
General technical requirements of polyEthylene barrier 聚乙烯隔离墩通用技术条件 |
China National Standards Ethylene |
English PDF |
| GB/T 34611-2017 |
Rigid polyurethane spray polyEthylene winding prefabricated directly buried insulating pipes 硬质聚氨酯喷涂聚乙烯缠绕预制直埋保温管 |
China National Standards Ethylene |
English PDF |
| GB 13735-2017 |
PolyEthylene blown mulch film for agricultural uses 聚乙烯吹塑农用地面覆盖薄膜 |
China National Standards Ethylene |
English PDF |
| GB/T 13747.1-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 1：Determination of tin content—Potassium iodate titration and phenylfluorone-polyEthylene glycoloctyl phenyl ether spectrophotometry 锆及锆合金化学分析方法 第1部分：锡量的测定 碘酸钾滴定法和苯基荧光酮-聚乙二醇辛基苯基醚分光光度法 |
China National Standards Ethylene |
English PDF |
| GB/T 23257-2017 |
PolyEthylene coating for buried steel pipeline 埋地钢质管道聚乙烯防腐层 |
China National Standards Ethylene |
English PDF |
| GB/T 33578.1-2017 |
Guideline of risk based inspection of complete units—Part 1：Ethylene units 成套装置基于风险的检验细则 第1部分：乙烯装置 |
China National Standards Ethylene |
English PDF |
| GB/T 13663.1-2017 |
PolyEthylene(PE) piping systems for water supply—Part 1: General 给水用聚乙烯（PE）管道系统 第1部分：总则 |
China National Standards Ethylene |
English PDF |
| GB/T 19472.2-2017 |
PolyEthylene structure-wall piping systems for underground usage—Part2: Polyethylene spirally enwound structure-wall pipes 埋地用聚乙烯（PE）结构壁管道系统 第2部分：聚乙烯缠绕结构壁管材 |
China National Standards Ethylene |
English PDF |
| GB/T 35268-2017 |
Textiles—Quantitative chemical analysis—Mixtures of polytetrafluoroEthylene and certain other fibres 纺织品 定量化学分析 聚四氟乙烯纤维与某些其他纤维的混合物 |
China National Standards Ethylene |
English PDF |
| GB/T 35748-2017 |
PolytetrafluoroEthylene filament 聚四氟乙烯长丝 |
China National Standards Ethylene |
English PDF |
| GB/T 17830-2017 |
Determination of polyEthylene glycol content in nonionic ethoxylated surfactants—HPLC method 聚乙氧基化非离子表面活性剂中聚乙二醇含量的测定 高效液相色谱法 |
China National Standards Ethylene |
English PDF |
| GB/T 35173-2017 |
Characterisation and testing methods of recycled poly (Ethylene terephthalate)(PET) 聚对苯二甲酸乙二醇酯（PET）塑料回收料的表征特性及检测方法 |
China National Standards Ethylene |
English PDF |
| GB/T 33398-2016 |
Optical functional films—PolyEthylene terephthalate(PET) film—Determination of surface resistance 光学功能薄膜 聚对苯二甲酸乙二醇酯(PET)薄膜 表面电阻测定方法 |
China National Standards Ethylene |
English PDF |
| GB/T 33418-2016 |
Test method of chemical indicator for Ethylene oxide sterilization processes 环氧乙烷灭菌化学指示物检验方法 |
China National Standards Ethylene |
English PDF |
| GB/T 33419-2016 |
Test method of biological indicator for Ethylene oxide sterilization processes 环氧乙烷灭菌生物指示物检验方法 |
China National Standards Ethylene |
English PDF |
| GB/T 33399-2016 |
Optical functional films—PolyEthylene terephthalate(PET) film—Determination of thickness 光学功能薄膜 聚对苯二甲酸乙二醇酯(PET)薄膜 厚度测定方法 |
China National Standards Ethylene |
English PDF |
| GB/T 19701.1-2016 |
Implants for surgery—Ultra-high-molecular-weight polyEthylene—Part 1: Powder form 外科植入物 超高分子量聚乙烯 第1部分：粉料 |
China National Standards Ethylene |
English PDF |
| GB/T 19701.2-2016 |
Implants for surgery—Ultra-high-molecular-weight polyEthylene—Part 2: Moulded forms 外科植入物 超高分子量聚乙烯 第2部分：模塑料 |
China National Standards Ethylene |
English PDF |
| GB/T 33319-2016 |
Plastics—polyEthylene compounds for breathable film 塑料 聚乙烯（PE）透气膜专用料 |
China National Standards Ethylene |
English PDF |
| GB/T 33317-2016 |
Plastics—Phenolic resins—Determination of hexamEthylenetetramine content—Kjeldahl method,perchloric acid method and hydrochloric acid method 塑料 酚醛树脂 六次甲基四胺含量的测定 凯氏定氮法、高氯酸法和盐酸法 |
China National Standards Ethylene |
English PDF |
| GB/T 1548-2016 |
Pulps—Determination of limiting viscosity number in cupri-Ethylenediamine (CED) solution 纸浆 铜乙二胺（CED）溶液中特性粘度值的测定 |
China National Standards Ethylene |
English PDF |
| GB 31604.44-2016 |
National Food Safety Standard-Food contact materials and products-Determination of migration amounts of Ethylene glycol and diethylene glycol 食品安全国家标准 食品接触材料及制品 乙二醇和二甘醇迁移量的测定 |
China National Standards Ethylene |
English PDF |
| GB 31604.43-2016 |
National Food Safety Standard-Food contact materials and products-Determination of migration amount of Ethylenediamine and hexamethylene diamine 食品安全国家标准 食品接触材料及制品 乙二胺和己二胺迁移量的测定 |
China National Standards Ethylene |
English PDF |
| GB 31604.27-2016 |
National Food Safety Standard-Food contact materials and products-Plastics - Determination of Ethylene oxide and propylene oxide 食品安全国家标准 食品接触材料及制品 塑料中环氧乙烷和环氧丙烷的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 33090-2016 |
Chemical reagent—N-(1-naphthyl)Ethylenediamine dihydrochloride 化学试剂 N-(1-萘基)乙二胺盐酸盐 |
China National Standards Ethylene |
English PDF |
| GB/T 1845.1-2016 |
Plastics—PolyEthylene(PE) moulding and extrusion materials—Part 1: Designation system and basis for specifications 塑料 聚乙烯（PE）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Ethylene |
English PDF |
| GB/T 14571.1-2016 |
Test method of monoEthylene glycol for industrial use—Part 1: Determination of acidity—Titration method 工业用乙二醇试验方法 第1部分：酸度的测定 滴定法 |
China National Standards Ethylene |
English PDF |
| GB/T 14571.5-2016 |
Test method of monoEthylene glycol for industrial use—Part 5: Determination of chloride ion—Ion chromatography 工业用乙二醇试验方法 第5部分：氯离子的测定 离子色谱法 |
China National Standards Ethylene |
English PDF |
| GB/T 30924.1-2016 |
Plastics—Ethylene-vinyl acetate(EVAC) moulding and extrusion materials—Part 1: Designation system and basis for specification 塑料 乙烯-乙酸乙烯酯（EVAC）模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Ethylene |
English PDF |
| GB 5009.249-2016 |
National Food Safety Standard - Determination of ferrous sodium Ethylenediaminetetraacetate in iron fortified soy sauce 食品安全国家标准 铁强化酱油中乙二胺四乙酸铁钠的测定 |
China National Standards Ethylene |
English PDF |
| GB 1886.72-2016 |
National Food Safety Standard-Food Additives-PolyoxyEthylene polyoxypropylene amine ether 食品安全国家标准 食品添加剂 聚氧乙烯聚氧丙烯胺醚 |
China National Standards Ethylene |
English PDF |
| GB/T 32679-2016 |
Ultra-high-molecular-weight polyEthylene(PE-UHMW) resin 超高分子量聚乙烯（PE-UHMW）树脂 |
China National Standards Ethylene |
English PDF |
| GB/T 32682-2016 |
Plastics—Determination of environment stress cracking (ESC) of polyEthylene—Full-notch creep test (FNCT) 塑料 聚乙烯环境应力开裂（ESC）的测定 全缺口蠕变试验（FNCT） |
China National Standards Ethylene |
English PDF |
| GB/T 32696-2016 |
Photography—Determination of residual thiosulfate and other related chemicals in processed photographic materials—Methods using iodine-amylose,mEthylene blue and silver sulfide 摄影 已加工过的摄影材料上残留的硫代硫酸盐和其它相关的化学品的测定方法 碘直链淀粉、亚甲基蓝和硫化银法 |
China National Standards Ethylene |
English PDF |
| GB/T 22271.3-2016 |
Plastics—PolyoxymEthylene(POM) moulding and extrusion materials—Part 3: Requirements for general materials 塑料 聚甲醛（POM）模塑和挤塑材料 第3部分：通用产品要求 |
China National Standards Ethylene |
English PDF |
| GB/T 13519-2016 |
PolyEthylene heat-shrinkable film for packaging applications 包装用聚乙烯热收缩薄膜 |
China National Standards Ethylene |
English PDF |
| GB 15558.1-2015 |
Buried polyEthylene(PE) piping systems for the supply of gaseous fuels—Part 1 :Pipes 燃气用埋地聚乙烯（PE）管道系统 第1部分：管材 |
China National Standards Ethylene |
English PDF |
| GB/T 32439-2015 |
Cross helically wound steel wires reinforced-polyEthylene composite pipelines for water supply 给水用钢丝网增强聚乙烯复合管道 |
China National Standards Ethylene |
English PDF |
| GB/T 32434-2015 |
Plastics pipes and fittings—Butt fusion jointing procedures fortpolyEthylene (PE) pipes and fittings used in the construction of gas and water distribution systems 塑料管材和管件 燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序 |
China National Standards Ethylene |
English PDF |
| GB/T 32346.3-2015 |
Long AC submarine cables with cross-linked polyEthylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 3: Accessories for submarine cables 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第3部分：海底电缆附件 |
China National Standards Ethylene |
English PDF |
| GB/T 32346.2-2015 |
Long AC submarine cables with cross-linked polyEthylene insulation and their accessoried for rated voltage of 220kV(Um=252kV)—Part 2: Long AC submarine cables 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第2部分: 大长度交流海底电缆 |
China National Standards Ethylene |
English PDF |
| GB/T 32346.1-2015 |
Long AC submarine cables with cross-linked polyEthylene insulation and their accessories for rated voltage of 220 kV(Um=252 kV)—Part 1: Test methods and requirements 额定电压220 kV(Um=252 kV)交联聚乙烯绝缘大长度交流海底电缆及附件 第1部分：试验方法和要求 |
China National Standards Ethylene |
English PDF |
| GB/T 13658-2015 |
PolymEthylene polyphenylene isocyanate 多亚甲基多苯基异氰酸酯 |
China National Standards Ethylene |
English PDF |
| GB/T 18279.2-2015 |
Sterilization of health care products—Ethylene oxide—Part 2: Guidance on the application of GB 18279.1 医疗保健产品的灭菌 环氧乙烷 第2部分：GB 18279.1应用指南 |
China National Standards Ethylene |
English PDF |
| GB/T 16886.7-2015 |
Biological evaluation of medical devices—Part 7: Ethylene oxide sterilization residuals 医疗器械生物学评价 第7部分：环氧乙烷灭菌残留量 |
China National Standards Ethylene |
English PDF |
| GB 18281.2-2015 |
Sterilization of health care products—Biological indicators—Part 2: Biological indicators for Ethylene oxide sterilization processes 医疗保健产品灭菌 生物指示物 第2部分：环氧乙烷灭菌用生物指示物 |
China National Standards Ethylene |
English PDF |
| GB 18279.1-2015 |
Sterilization of health care products—Ethylene oxide—Part 1: Requirements for development,validation and routine control of a sterilization process for medical devices 医疗保健产品灭菌 环氧乙烷 第1部分：医疗器械灭菌过程的开发、确认和常规控制的要求 |
China National Standards Ethylene |
English PDF |
| GB/T 32164-2015 |
Water saving enterprises—Ethylene production 节水型企业 乙烯行业 |
China National Standards Ethylene |
English PDF |
| GB/T 32115-2015 |
Determination of Ethylene glycol and diethylene glycol in oral care products 口腔护理产品中乙二醇与二甘醇的测定方法 |
China National Standards Ethylene |
English PDF |
| GB/T 18890.3-2015 |
Power cables with cross-linked polyEthylene insulation and their accessories for rated voltage of 220 kV（Um=252 kV）—Part 3: Accessories 额定电压220kV（Um=252 kV）交联聚乙烯绝缘电力电缆及其附件 第3部分：电缆附件 |
China National Standards Ethylene |
English PDF |
| GB/T 18890.2-2015 |
Power cables with cross-linked polyEthylene insulation and their accessories for rated voltage of 220 kV（Um=252 kV）—Part 2: Power cables 额定电压220kV（Um=252 kV）交联聚乙烯绝缘电力电缆及其附件 第2部分：电缆 |
China National Standards Ethylene |
English PDF |
| GB/T 18890.1-2015 |
Power cables with cross-linked polyEthylene insulation and their accessories for rated voltage of 220 kV（Um=252 kV）—Part 1: Test methods and requirements 额定电压220kV（Um=252 kV）交联聚乙烯绝缘电力电缆及其附件 第1部分：试验方法和要求 |
China National Standards Ethylene |
English PDF |
| GB 1886.112-2015 |
National food safety standard — Food additive — PolyoxyEthylene xylitol monostearate 食品安全国家标准 食品添加剂 聚氧乙烯木糖醇酐单硬脂酸酯 |
China National Standards Ethylene |
English PDF |
| GB 1886.99-2015 |
National Food Safety Standard-Food Additives-L-α-aspartyl-N- (2,2,4,4-tetramethyl-3-sulfenyltrimEthylene) 食品安全国家标准 食品添加剂 L-α-天冬氨酰-N-（2,2,4,4-四甲基-3-硫化三亚甲基） |
China National Standards Ethylene |
English PDF |
| GB 32048-2015 |
The norm of energy consumption per unit product of Ethylene glycol 乙二醇单位产品能源消耗限额 |
China National Standards Ethylene |
English PDF |
| GB/T 31984-2015 |
Test method for determining the content of vinyl acetate in Ethylene-vinyl acetate copolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA) 光伏组件用乙烯-醋酸乙烯共聚物中醋酸乙烯酯含量测试方法 热重分析法（TGA） |
China National Standards Ethylene |
English PDF |
| GB/T 5711-2015 |
Textiles—Tests for colour fastness—Colour fastness to drycleaning using perchloroEthylene solvent 纺织品 色牢度试验 耐四氯乙烯干洗色牢度 |
China National Standards Ethylene |
English PDF |
| GB/T 6346.11-2015 |
Fixed capacitors for use in electronic equipment—Part 11: Sectional specification—―Fixed polyEthylene-terephthalate film dielectric metal foil d.c. capacitors 电子设备用固定电容器 第11部分：分规范 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器 |
China National Standards Ethylene |
English PDF |
| GB/T 6346.1101-2015 |
Fixed capacitors for use in electronic equipment—Part 11-1: Blank detail specification—Fixed polyEthylene-terephthalate film dielectric metal foil d.c.capacitors—Assessment level EZ 电子设备用固定电容器 第11-1部分：空白详细规范 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器 评定水平EZ |
China National Standards Ethylene |
English PDF |
| GB/T 31530-2015 |
Low-level mercury catalyst for chloroEthylene synthesis 氯乙烯合成用低汞触媒 |
China National Standards Ethylene |
English PDF |
| GB/T 31515-2015 |
Seamless polyEthylene-aluminum coextruded composite tube 无缝铝塑共挤出复合软管 |
China National Standards Ethylene |
English PDF |
| GB/T 30668-2014 |
Ultra high molecular weight polyEthylene fibre 8 strand braided ropes, 12 strand braided ropes and covered ropes 超高分子量聚乙烯纤维8股、12股编绳和复编绳索 |
China National Standards Ethylene |
English PDF |
| GB/T 14837.1-2014 |
Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 1：Butadiene, Ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers 橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第1部分：丁二烯橡胶、乙烯-丙烯二元和三元共聚物、异丁烯-异戊二烯橡胶、异戊二烯橡胶、苯乙烯-丁二烯橡胶 |
China National Standards Ethylene |
English PDF |
| GB/T 1400-2014 |
Chemical reagent―HexamEthylene tetramine 化学试剂 六次甲基四胺 |
China National Standards Ethylene |
English PDF |
| GB/T 11017.3-2014 |
Power cables with cross-linked polyEthylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）―Part 3: Accessories 额定电压110kV（Um=126kV）交联聚乙烯绝缘电力电缆及其附件 第3部分：电缆附件 |
China National Standards Ethylene |
English PDF |
| GB/T 11017.2-2014 |
Power cables with cross-linked polyEthylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）—Part 2: Power cables 额定电压110kV（Um=126kV） 交联聚乙烯绝缘电力电缆及其附件 第2部分: 电缆 |
China National Standards Ethylene |
English PDF |
| GB/T 11017.1-2014 |
Power cables with cross-linked polyEthylene insulation and their accessories for rated voltage of 110 kV（Um=126 kV）―Part 1: Test methods and requirements 额定电压110kV（Um=126kV）交联聚乙烯绝缘电力电缆及其附件 第1部分：试验方法和要求 |
China National Standards Ethylene |
English PDF |
| GB/T 7715-2014 |
Ethylene for industrial use―Specification 工业用乙烯 |
China National Standards Ethylene |
English PDF |
| GB/T 30925-2014 |
Plastics―Ethylene-vinyl acetate copolymer(EVAC) thermoplastics―Determination of vinyl acetate content 塑料 乙烯-乙酸乙烯酯共聚物（EVAC）热塑性塑料 乙酸乙烯酯含量的测定 |
China National Standards Ethylene |
English PDF |
| GB/T 30924.2-2014 |
Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Ethylene |
English PDF |
| GB/T 30920-2014 |
Chlorosulfonted polyEthylene(CSM) rubber 氯磺化聚乙烯（CSM）橡胶 |
China National Standards Ethylene |
English PDF |
| GB/T 24797.3-2014 |
Film for wrapping rubber bales―Part 3: Ethylene-propylene-diene rubber (EPDM)，acrylonitrilebutadiene rubber (NBR)，hydrogenated nitrile-butadiene rubber(HNBR)，acrylic-ethylene rubber (AEM) and acrylic rubber (ACM) 橡胶包装用薄膜 第3部分：乙烯-丙烯-二烯烃橡胶（EPDM）、丙烯腈-丁二烯橡胶（NBR）、氢化丙烯腈-丁二烯橡胶（HNBR）、乙烯基丙烯酸酯橡胶（AEM）和丙烯酸酯橡胶（ACM） |
China National Standards Ethylene |
English PDF |
| GB/T 13289-2014 |
Ethylene for industrial use―Sampling in the liquid and the gaseous phase 工业用乙烯液态和气态采样法 |
China National Standards Ethylene |
English PDF |
| GB/T 12701-2014 |
Ethylene and propylene for industrial use—Determination of trace oxygenates—Gas chromatographic method 工业用乙烯、丙烯中微量含氧化合物的测定 气相色谱法 |
China National Standards Ethylene |
English PDF |
| GB 30609-2014 |
National Food Safety Standard-Food Additives-PolyoxyEthylene polyoxypropylene pentaerythritol ether 食品安全国家标准 食品添加剂 聚氧乙烯聚氧丙烯季戊四醇醚 |
China National Standards Ethylene |
English PDF |
| GB/T 16467-2013 |
Fixed capacitors for use in electronic equipment―Part 19-1: Blank detail specification—Fixed metallized polyEthylene-terephthalate film dielectric surface mount d.c.capacitors―Assessment level EZ 电子设备用固定电容器 第19-1部分：空白详细规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 评定水平EZ |
China National Standards Ethylene |
English PDF |
| GB/T 15448-2013 |
Fixed capacitors for use in electronic equipment—Part 19: Sectional specification—Fixed metallized polyEthylene-terephthalate film dielectric surface mount d.c.capacitors 电子设备用固定电容器 第19部分:分规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
China National Standards Ethylene |
English PDF |
| GB 30250-2013 |
The norm of energy consumption per unit product of Ethylene plant 乙烯装置单位产品能源消耗限额 |
China National Standards Ethylene |
English PDF |
| GB/T 29848-2013 |
Ethylene-vinyl acetate copolymer(EVA) film for encapsulant solar module 光伏组件封装用乙烯-醋酸乙烯酯共聚物（EVA）胶膜 |
China National Standards Ethylene |
English PDF |
| GB/T 29640-2013 |
Plastics - Glass fiber reinforced poly(decamEthylene terephthalamide) compound 塑料 玻璃纤维增强聚对苯二甲酰癸二胺 |
China National Standards Ethylene |
English PDF |
| GB/T 29554-2013 |
Ultra high molecular weight polyEthylene fibre 超高分子量聚乙烯纤维 |
China National Standards Ethylene |
English PDF |
| GB 29438-2012 |
The norm of energy consumption per unit product of polyoxymEthylene 聚甲醛单位产品能源消耗限额 |
China National Standards Ethylene |
English PDF |
| GB/T 29047-2012 |
Prefabricated directly buried insulating pipes and fittings with polyurethane [PUR]foamed-plastics and high density polyEthylene [PE]casing pipes 高密度聚乙烯外护管硬质聚氨酯泡沫塑料预制直埋保温管及管件 |
China National Standards Ethylene |
English PDF |
| GB/T 7385-2012 |
Non-ionic surface active agents - Polyethoxylated derivatives - Iodometric determination of oxyEthylene groups 非离子型表面活性剂 聚乙氧基化衍生物中氧乙烯基含量的测定 碘量法 |
China National Standards Ethylene |
English PDF |
| GB/T 29461-2012 |
Ultrasonic testing for electrofusion joint of polyEthylene pipe 聚乙烯管道电熔接头超声检测 |
China National Standards Ethylene |
English PDF |
| GB/T 29460-2012 |
Safey assessment for electrofusion joint of polyEthylene pipes containing defects 含缺陷聚乙烯管道电熔接头安全评定 |
China National Standards Ethylene |
English PDF |
| GB 29222-2012 |
National Food Safety Standard - Food Additive - PolyoxyEthylene (20) Sorbitan Monopalmitate (Tween 40) 食品安全国家标准 食品添加剂 聚氧乙烯（20）山梨醇酐单棕榈酸酯（吐温40） |
China National Standards Ethylene |
English PDF |
| GB 29221-2012 |
National Food Safety Standard - Food Additive - PolyoxyEthylene (20) Sorbitan Monolaurate (Tween 20) 食品安全国家标准 食品添加剂 聚氧乙烯（20）山梨醇酐单月桂酸酯（吐温20） |
China National Standards Ethylene |
English PDF |
| GB/T 28799.3-2012 |
Plastics piping systems for hot and cold water installations - PolyEthylene of raised temperature resistance (PE-RT) - Part 3: Fittings 冷热水用耐热聚乙烯（PE-RT）管道系统 第3部分：管件 |
China National Standards Ethylene |
English PDF |
| GB/T 28799.2-2012 |
Plastics piping systems for hot and cold water installations - PolyEthylene of raised temperature resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯（PE-RT）管道系统 第2部分：管材 |
China National Standards Ethylene |
English PDF |
| GB/T 28799.1-2012 |
Plastics piping systems for hot and cold water installations - PolyEthylene of raised temperature resistance (PE-RT) - Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分：总则 |
China National Standards Ethylene |
English PDF |
| GB/T 7333-2012 |
Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyEthylene-terephthalate film dielectric d.c.capacitors - Assessment levels E and EZ 电子设备用固定电容器 第2-1部分：空白详细规范 金属化聚乙烯对苯二甲酸酯膜介质 直流固定电容器 评定水平E和EZ |
China National Standards Ethylene |
English PDF |
| GB/T 28596-2012 |
Internal carbon coated PolyEthylene terephthalate (PET) bottle 内壁碳涂层聚对苯二甲酸乙二醇酯瓶 |
China National Standards Ethylene |
English PDF |
| Find out:363Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
