Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43846.1-2024 |
Microscope-Nomenclature of microscope objectives-Part 1: Image field Flatness/flat field {译} 显微镜-显微镜物镜的命名-第1部分：像场平面度/平场 |
China National Standards Flat |
 English PDF |
| GB/T 43685-2024 |
General technical requirements for inFlatable membrane structure cabins and controlled environments {译} 充气膜结构舱室及受控环境通用技术要求 |
China National Standards Flat |
English PDF |
| GB/T 43774-2024 |
Flat panel display substrate glass stress test - point scanning method {译} 平板显示器基板玻璃应力测试-点扫描法 |
China National Standards Flat |
English PDF |
| GB/T 43793.2-2024 |
Test methods for color photoresist for Flat panel displays-Part 3: Reliability {译} 平板显示用彩色光刻胶测试方法-第2部分：光学性能 |
China National Standards Flat |
English PDF |
| GB/T 43836-2024 |
Test methods for color photoresist for Flat panel displays-Part 2: Optical properties {译} 企业科技创新系统能力水平评价规范 |
China National Standards Flat |
English PDF |
| GB/T 43758.1-2024 |
Test methods for color photoresist for Flat panel displays-Part 1: Physical and chemical properties {译} 智能网联汽车运行安全测试环境技术条件-第1部分：公共道路 |
China National Standards Flat |
English PDF |
| GB/T 43725-2024 |
Test methods for positive photoresist materials for Flat panel display arrays {译} 直写成像式曝光设备 |
China National Standards Flat |
English PDF |
| GB/T 32151.7-2023 |
Carbon Emission Accounting and Reporting Requirements Part 7: Flat Glass Manufacturing Enterprises {译} 碳排放核算与报告要求 第7部分：平板玻璃生产企业 |
China National Standards Flat |
English PDF |
| GB/T 28819-2023 |
Aluminum alloy housing for inFlatable high-voltage switchgear {译} 充气高压开关设备用铝合金外壳 |
China National Standards Flat |
English PDF |
| GB 37219-2023 |
Safety regulations for inFlatable amusement equipment {译} 充气式游乐设施安全规范 |
China National Standards Flat |
English PDF |
| GB/T 43300-2023 |
Ceramic Flat Membrane Pure Water Flux Test Method {译} 陶瓷平板膜 纯水通量试验方法 |
China National Standards Flat |
English PDF |
| GB 31653-2021 |
National Food Safety Standards Specifications for Control of AFlatoxin Contamination in Food {译} 食品安全国家标准 食品中黄曲霉毒素污染控制规范 |
China National Standards Flat |
English PDF |
| GB/T 9126.2-2023 |
Non-metallic Flat gaskets for pipe flanges Part 2: Class series {译} 管法兰用非金属平垫片 第2部分：Class系列 |
China National Standards Flat |
English PDF |
| GB/T 9126.1-2023 |
Non-metallic Flat gaskets for pipe flanges Part 1: PN series {译} 管法兰用非金属平垫片 第1部分：PN系列 |
China National Standards Flat |
English PDF |
| GB/T 43077.4-2023 |
Hydraulic Transmission Connections Plain Threaded Flat Ports and Stud Ends Part 4: Hexagonal Screw Plug {译} 液压传动连接 普通螺纹平油口和螺柱端 第4部分：六角螺塞 |
China National Standards Flat |
English PDF |
| GB/T 43059-2023 |
Flatness control requirements for printed boards and printed board assemblies {译} 印制板及印制板组装件的平整度控制要求 |
China National Standards Flat |
English PDF |
| GB/T 3114-2023 |
Copper and copper alloy Flat wire {译} 铜及铜合金扁线 |
China National Standards Flat |
English PDF |
| GB/T 42669-2023 |
Corrosion-resistant Flat bulb steel for cargo tanks of crude oil tankers {译} 原油船货油舱用耐腐蚀球扁钢 |
China National Standards Flat |
English PDF |
| GB/T 4678.16-2023 |
Die-casting mold parts - Part 16: Flat push rods {译} 压铸模 零件 第16部分：扁推杆 |
China National Standards Flat |
English PDF |
| GB/T 25680-2023 |
Printing Machinery Horizontal Flat Press Die Cutting Machine {译} 印刷机械 卧式平压模切机 |
China National Standards Flat |
English PDF |
| GB/T 42329.1-2023 |
Ships and offshore technology - InFlatable buoyancy support systems for ships for protection against flooding - Part 1: Air supply systems {译} 船舶与海上技术 船舶浸水防护用充气浮力支持系统 第1部分：供气系统 |
China National Standards Flat |
English PDF |
| GB 41731-2022 |
InFlatable lifejackets for boats {译} 船用气胀式救生衣 |
China National Standards Flat |
English PDF |
| GB/T 20632.3-2022 |
Steel paper for electrical purposes - Part 3: Flat steel paper {译} 电气用钢纸 第3部分：平板钢纸 |
China National Standards Flat |
English PDF |
| GB/T 1453-2022 |
Test method for Flat compressive properties of sandwich structures or cores {译} 夹层结构或芯子平压性能试验方法 |
China National Standards Flat |
English PDF |
| GB/T 25279-2022 |
Hollow fiber Flat-plat membrane module 中空纤维帘式膜组件 |
China National Standards Flat |
English PDF |
| GB/T 30586-2022 |
Copper clad aluminium Flat bars 铜包铝扁棒 |
China National Standards Flat |
English PDF |
| GB/T 31148-2022 |
Wooden Flat pallet—General technical requirement 木质平托盘 通用技术要求 |
China National Standards Flat |
English PDF |
| GB/T 41321-2022 |
Test method for stiffness of self-supporting run-Flat tires {译} 自体支撑型缺气保用轮胎刚度试验方法 |
China National Standards Flat |
English PDF |
| GB/T 30196-2022 |
Self-supporting run-Flat tires {译} 自体支撑型缺气保用轮胎 |
China National Standards Flat |
English PDF |
| GB/T 21296.6-2022 |
Automatic weighing instruments for road vehicles in motion - Part 6: Flat modular {译} 动态公路车辆自动衡器 第6部分：平板模块式 |
China National Standards Flat |
English PDF |
| GB/T 42166-2022 |
inFlatable clothing {译} 充气服装 |
China National Standards Flat |
English PDF |
| GB/T 41891.2-2022 |
Ships and marine technology - InFlatable buoyancy support systems for ships for protection against flooding - Part 2: Buoyancy tanks {译} 船舶与海上技术 船舶浸水防护用充气浮力支持系统 第2部分：浮箱 |
China National Standards Flat |
English PDF |
| GB/T 34315.1-2022 |
Small boats - InFlatable liferafts - Part 1: Type I {译} 小艇 气胀式救生筏 第1部分：I型 |
China National Standards Flat |
English PDF |
| GB/T 18916.63-2022 |
Water withdrawal quotas - Part 63: Flat glass {译} 取水定额 第63部分：平板玻璃 |
China National Standards Flat |
English PDF |
| GB/T 40314-2021 |
Corrosion of metals and alloys—Crevice corrosion formers with disc springs for Flat specimens or tubes made from stainless steel 金属和合金的腐蚀 适用于不锈钢平板或管状试样的碟形弹簧缝隙腐蚀构型 |
China National Standards Flat |
English PDF |
| GB/T 13345-2021 |
Oil film bearing for Flat rolling mill 板带轧机轧辊油膜轴承 |
China National Standards Flat |
English PDF |
| GB/T 39809-2021 |
Measuring method of the energy consumption of Flat glass furnace 平板玻璃窑炉能耗测定方法 |
China National Standards Flat |
English PDF |
| GB/T 39848-2021 |
Methods of measurement for Flat panel display color gamut 平板显示器色域测量方法 |
China National Standards Flat |
English PDF |
| GB/T 39803-2021 |
Technical regulation of energy consumption evaluation for Flat glass manufacturing 平板玻璃制造能耗评价技术要求 |
China National Standards Flat |
English PDF |
| GB/T 39773-2021 |
Energy consumption test technical regulation for Flat glass manufacturing 平板玻璃制造能耗测试技术规程 |
China National Standards Flat |
English PDF |
| GB/T 6424-2021 |
Flat plate solar collectors 平板型太阳能集热器 |
China National Standards Flat |
English PDF |
| GB/T 3098.26-2021 |
Mechanical properties of fasteners—Flat washers 紧固件机械性能 平垫圈 |
China National Standards Flat |
English PDF |
| GB/T 26978-2021 |
Design and manufacture of site built, vertical, cylindrical, Flat-bottomed steel tanks for the storage of cryogenic liquefied gas 现场组装立式圆筒平底钢质低温液化气储罐的设计与建造 |
China National Standards Flat |
English PDF |
| GB/T 40826-2021 |
Test method for hand-arranging staple length of dehaired cashmere—Flatbed scanner method 分梳山羊绒手排长度试验方法 图板电子扫描仪法 |
China National Standards Flat |
English PDF |
| GB 24850-2020 |
Minimum allowable values of energy efficiency and energy efficiency grades for Flat panel televisions and set-top boxes 平板电视与机顶盒能效限定值及能效等级 |
China National Standards Flat |
English PDF |
| GB/T 39717-2020 |
Ceramic Flat membrane for water treatment 水处理用陶瓷膜板 |
China National Standards Flat |
English PDF |
| GB/T 39158-2020 |
High purity copper rotatable tube target for Flat panel display 平面显示用高纯铜旋转管靶 |
China National Standards Flat |
English PDF |
| GB 38450-2019 |
Minimum allowable values of energy efficiency and energy efficiency grades of LED Flat panel luminaires 普通照明用LED平板灯能效限定值及能效等级 |
China National Standards Flat |
English PDF |
| GB/T 38425.2-2019 |
Textile machinery and accessories—Flat steel healds with closed end loops—Part 2：Dimensions of healds manufactured of hardened strip steel 纺织机械与附件 闭口综耳钢片综 第2部分：淬火钢带钢片综的尺寸 |
China National Standards Flat |
English PDF |
| GB/T 38399.3-2019 |
Textile machinery and accessories—Vocabulary of Flat warp knitting machines—Part 3: Patterning devices 纺织机械与附件 平型经编机词汇 第3部分：提花装置 |
China National Standards Flat |
English PDF |
| GB/T 38399.4-2019 |
Textile machinery and accessories—Vocabulary of Flat warp knitting machines—Part 4: Stitch bonding machines and stitch bonding devices 纺织机械与附件 平型经编机词汇 第4部分：缝编机和缝编装置 |
China National Standards Flat |
English PDF |
| GB/T 38399.2-2019 |
Textile machinery and accessories—Vocabulary of Flat warp knitting machines—Part 2: Warp let-off, fabric take-up and batching 纺织机械与附件 平型经编机词汇 第2部分：送经、织物牵拉和卷取 |
China National Standards Flat |
English PDF |
| GB/T 38399.1-2019 |
Textile machinery and accessories—Vocabulary of Flat warp knitting machines—Part 1: Basic structure and knitting elements 纺织机械与附件 平型经编机词汇 第1部分：基本结构和成圈机件 |
China National Standards Flat |
English PDF |
| GB/T 50527-2019 |
Standard for design of energy conservation of Flat glass plant 平板玻璃工厂节能设计标准 |
China National Standards Flat |
English PDF |
| GB/T 37854-2019 |
Wide-mouth glass containers—Deviation from Flatness of top sealing surface—Test methods 广口玻璃容器 封合面平面度偏差 试验方法 |
China National Standards Flat |
English PDF |
| GB/T 37751.32-2019 |
：Residual current operated circuit-breakers for household and similar use—Part 3-2: Particular requirements for RCDs with Flat quick-connect terminations 家用和类似用途的剩余电流动作断路器 第3-2部分：带扁平快速连接端头的RCD的特殊要求 |
China National Standards Flat |
English PDF |
| GB/T 20897.4-2019 |
InFlatable boats—Part 4:Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater 充气艇 第4部分：发动机额定功率为15 kW及以上且船长在8m～24m之间的艇 |
China National Standards Flat |
English PDF |
| GB/T 17030-2019 |
Polyvinylidene chloride(PVDC)Flat-film for food-packaging 食品包装用聚偏二氯乙烯（PVDC）片状肠衣膜 |
China National Standards Flat |
English PDF |
| GB/T 2673.1-2018 |
Hexalobular socket countersunk Flat head screws 内六角花形沉头螺钉 |
China National Standards Flat |
English PDF |
| GB/T 37219-2018 |
Safety requirements of inFlatable play equipment 充气式游乐设施安全规范 |
China National Standards Flat |
English PDF |
| GB/T 31370.5-2018 |
Test method of Flat panel display (FPD) color filters—Part 5: Contrast ratio 平板显示器(FPD)彩色滤光片测试方法-第5部分：对比度 |
China National Standards Flat |
English PDF |
| GB/T 50559-2018 |
Flat glass factory environmental protection facility design standards 平板玻璃工厂环境保护设施设计标准 |
China National Standards Flat |
English PDF |
| GB/T 37210-2018 |
Nuclear radiation-resistant inFlatable and water-filled rubber sealing products 耐核辐射充气和充水橡胶密封制品 |
China National Standards Flat |
English PDF |
| GB/T 2980-2018 |
Size designation，dimensions,inFlation pressure and load capacity for earth-mover tyres 工程机械轮胎规格、尺寸、气压与负荷 |
China National Standards Flat |
English PDF |
| GB/T 36952-2018 |
Test method for surface scratch resistance of Flat panel display（FPD）polarizing film 平板显示器（FPD）偏光膜表面耐划伤性的测试方法 |
China National Standards Flat |
English PDF |
| GB/T 36404-2018 |
On-line detection for spot faults of Flat glass 平板玻璃点状缺陷在线检测 |
China National Standards Flat |
English PDF |
| GB/T 36508-2018 |
InFlatable life preservers for aviation 航空用气胀式救生衣 |
China National Standards Flat |
English PDF |
| GB/T 36858-2018 |
Determination of aFlatoxin B1 in feeds—High performance liquid chromatography 饲料中黄曲霉毒素B1的测定 高效液相色谱法 |
China National Standards Flat |
English PDF |
| GB/T 1452-2018 |
Test method for Flatwise tension strength of sandwich constructions 夹层结构平拉强度试验方法 |
China National Standards Flat |
English PDF |
| GB/T 36405-2018 |
Test method for stress in Flat glass 平板玻璃应力检测方法 |
China National Standards Flat |
English PDF |
| GB/T 36138-2018 |
Flat-plate microfiltration membrane of polytetrafluoroethylene for sterilizing 除菌用聚四氟乙烯平板式微滤膜 |
China National Standards Flat |
English PDF |
| GB/T 34394-2017 |
Maximum working load for Flat pallets 平托盘最大工作载荷 |
China National Standards Flat |
English PDF |
| GB/T 34396-2017 |
Repair of Flat wooden pallets used in pallet pool system 托盘共用系统木质平托盘维修规范 |
China National Standards Flat |
English PDF |
| GB/T 2979-2017 |
Size designation, dimensions, inFlation pressure and load capacity for agricultural tyres 农业轮胎规格、尺寸、气压与负荷 |
China National Standards Flat |
English PDF |
| GB/T 20897.3-2017 |
InFlatable boats—Part3: Boats with a maximum motor power rating of 15 kW and greater 充气艇 第3部分：发动机最大额定功率为15 kW及以上的艇 |
China National Standards Flat |
English PDF |
| GB/T 34315.3-2017 |
Small craft—InFlatable liferafts—Part 3：Materials 小艇 气胀式救生筏 第3部分：材料 |
China National Standards Flat |
English PDF |
| GB/T 34315.2-2017 |
Small craft—InFlatable liferafts—Part 2: Type II 小艇 气胀式救生筏 第2部分：Ⅱ型 |
China National Standards Flat |
English PDF |
| GB/T 246-2017 |
Metallic materials—Tube—Flattening test 金属材料 管 压扁试验方法 |
China National Standards Flat |
English PDF |
| GB/T 73-2017 |
Slotted set screws with Flat point 开槽平端紧定螺钉 |
China National Standards Flat |
English PDF |
| GB/T 5283-2017 |
Slotted countersunk (Flat) head tapping screws 开槽沉头自攻螺钉 |
China National Standards Flat |
English PDF |
| GB/T 32076.9-2017 |
High-strength structural bolting assemblies for preloading—Part 9: Torshear type bolt with hexagon head with large width across Flats，and nut assemblies 预载荷高强度栓接结构连接副 第9部分：扭剪型大六角头螺栓和螺母连接副 |
China National Standards Flat |
English PDF |
| GB/T 846-2017 |
Cross-recessed countersunk (Flat) head tapping screws 十字槽沉头自攻螺钉 |
China National Standards Flat |
English PDF |
| GB/T 17196-2017 |
Connecting devices—Flat quick-connect terminations for electrical copper conductors—Safety requirements 连接器件 连接铜导线用的扁形快速连接端头 安全要求 |
China National Standards Flat |
English PDF |
| GB/T 4127.18-2017 |
Bonded abrasive products—Dimensions—Part 18: Grinding wheels for Flat glass edge grinding machines 固结磨具 尺寸 第18部分：平板玻璃磨边用砂轮 |
China National Standards Flat |
English PDF |
| GB/T 35781-2017 |
Plastic Flat pallet for pool system 托盘共用系统塑料平托盘 |
China National Standards Flat |
English PDF |
| GB/T 35762-2017 |
Textiles—Test method for thermal transmittance—Flat plate test 纺织品 热传递性能试验方法 平板法 |
China National Standards Flat |
English PDF |
| GB 5009.22-2016 |
National Food Safety Standard - Determination of B-group and G-group AFlatoxins in Foods 食品安全国家标准 食品中黄曲霉毒素B族和G族的测定 |
China National Standards Flat |
English PDF |
| GB 5009.24-2016 |
National food safety standard - Determination of M AFlatoxins in Foods 食品安全国家标准 食品中黄曲霉毒素M族的测定 |
China National Standards Flat |
English PDF |
| GB/T 33326-2016 |
Rubber strips used in Flat-plate solar collectors 平板太阳能集热器用橡胶密封条 |
China National Standards Flat |
English PDF |
| GB/T 33164.1-2016 |
Spring steels for automotive suspension system—Part 1: Hot rolled spring steel Flat bars 汽车悬架系统用弹簧钢 第1部分：热轧扁钢 |
China National Standards Flat |
English PDF |
| GB/T 2977-2016 |
Size designation,dimensions,inFlation pressure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards Flat |
English PDF |
| GB 50435-2016 |
Code for design of Flat glass plant 平板玻璃工厂设计规范 |
China National Standards Flat |
English PDF |
| GB/T 32648-2016 |
Specification for Flat panel display glass substrates shipment 平板显示器基板玻璃包装箱装运规范 |
China National Standards Flat |
English PDF |
| GB/T 32647-2016 |
Specification for Flat panel display glass substrates 平板显示器基板玻璃规范 |
China National Standards Flat |
English PDF |
| GB/T 32646-2016 |
Specification for Flat panel display glass substrates packaging 平板显示器用基板玻璃包装规范 |
China National Standards Flat |
English PDF |
| GB/T 32645-2016 |
Specification for edge condition of Flat panel display glass substrates 平板显示器基板玻璃边缘条件规范 |
China National Standards Flat |
English PDF |
| GB/T 32644-2016 |
Test method for chemical durability of Flat panel display glass substrates 平板显示器基板玻璃化学耐久性的试验方法 |
China National Standards Flat |
English PDF |
| GB/T 32643-2016 |
Flat panel displays glass substrates surface waviness measurement method 平板显示器基板玻璃表面波纹度的测量方法 |
China National Standards Flat |
English PDF |
| GB/T 32642-2016 |
Flat panel displays glass substrate surface roughness measurement method 平板显示器基板玻璃表面粗糙度的测量方法 |
China National Standards Flat |
English PDF |
| GB/T 32641-2016 |
Standard size for Flat panel display glass substrates 平板显示器基板玻璃标准尺寸 |
China National Standards Flat |
English PDF |
| GB/T 32640-2016 |
Quality area specification for Flat panel display glass substrates 平板显示器基板玻璃有效区域规范 |
China National Standards Flat |
English PDF |
| GB/T 32639-2016 |
Terminology for Flat panel display glass substrates 平板显示器基板玻璃术语 |
China National Standards Flat |
English PDF |
| GB/T 819.2-2016 |
Countersunk Flat head screws with cross recess—Part 2: Property class 8.8, stainless steel screws and non-ferrous metal screws 十字槽沉头螺钉 第2部分：8.8级、不锈钢及有色金属螺钉 |
China National Standards Flat |
English PDF |
| GB/T 819.1-2016 |
Countersunk Flat head screws with cross recess—Part 1: Property class 4.8 十字槽沉头螺钉 第1部分：4.8级 |
China National Standards Flat |
English PDF |
| GB/T 68-2016 |
Slotted countersunk Flat head screws 开槽沉头螺钉 |
China National Standards Flat |
English PDF |
| GB/T 32278-2015 |
Test methods for Flatness of monocrystalline silicon carbide wafers 碳化硅单晶片平整度测试方法 |
China National Standards Flat |
English PDF |
| GB/T 32184-2015 |
Extruded aluminum alloy Flat bars and plates with high conductivity 高电导率铝合金挤压扁棒及板 |
China National Standards Flat |
English PDF |
| GB/T 32151.7-2015 |
Requirements of the greenhouse gas emission accounting and reporting—Part 7: Flat glass enterprise 温室气体排放核算与报告要求 第7部分：平板玻璃生产企业 |
China National Standards Flat |
English PDF |
| GB/T 32076.7-2015 |
High-strength structural bolting assemblies for preloading—Part 7: M39~M64—Hexagon bolt with large width across Flats and nut assemblies 预载荷高强度栓接结构连接副 第7部分：M39~M64 大六角头螺栓和螺母连接副 |
China National Standards Flat |
English PDF |
| GB/T 32076.4-2015 |
High-strength structural bolting assemblies for preloading—Part 4: System HV—Hexagon bolt with large width across Flats and nut assemblies 预载荷高强度栓接结构连接副 第4部分：HV型 大六角头螺栓和螺母连接副 |
China National Standards Flat |
English PDF |
| GB/T 32076.3-2015 |
High-strength structural bolting assemblies for preloading—Part 3: System HR—Hexagon bolt with large width across Flats and nut assemblies 预载荷高强度栓接结构连接副 第3部分：HR型 大六角头螺栓和螺母连接副 |
China National Standards Flat |
English PDF |
| GB/T 32043-2015 |
Implementation guidance for energy management systems in Flat glass industry 平板玻璃行业能源管理体系实施指南 |
China National Standards Flat |
English PDF |
| GB/T 15876-2015 |
Semiconductor integrated circuits—Specification of leadframes for plastic quad Flat package 半导体集成电路 塑料四面引线扁平封装引线框架规范 |
China National Standards Flat |
English PDF |
| GB/T 31379-2015 |
Test method for Flat panel display (FPD) polarizing films 平板显示器（FPD）偏光膜试验方法 |
China National Standards Flat |
English PDF |
| GB/T 31378-2015 |
Test method for surface hardness of Flat panel display (FPD) polarizing film 平板显示器（FPD）偏光膜表面硬度的测试方法 |
China National Standards Flat |
English PDF |
| GB/T 31370.4-2015 |
Test mothod of Flat panel display (FPD) color filters—Part 4: Chemical resistance 平板显示器（FPD）彩色滤光片测试方法 第4部分：耐化学性 |
China National Standards Flat |
English PDF |
| GB/T 31370.3-2015 |
Test mothod of Flat panel display (FPD) color filters—Part 3: Heat resistance 平板显示器（FPD）彩色滤光片测试方法 第3部分：耐热性 |
China National Standards Flat |
English PDF |
| GB/T 31370.2-2015 |
Test mothod of Flat panel display (FPD) color filters—Part 2: Light resistance 平板显示器（FPD）彩色滤光片测试方法 第2部分：耐光性 |
China National Standards Flat |
English PDF |
| GB/T 31370.1-2015 |
Test mothod of Flat panel display (FPD) color filters—Part 1: Color and transmitance 平板显示器（FPD）彩色滤光片测试方法 第1部分：颜色和透光率 |
China National Standards Flat |
English PDF |
| GB/T 30672-2014 |
Moulded Flat pallets from plants fiber 模压平托盘 植物纤维类 |
China National Standards Flat |
English PDF |
| GB/T 2982-2014 |
Designation,dimensions,inFlation pressure and load capacity of pneumatic tyres for industrial vehicles 工业车辆充气轮胎规格、尺寸、气压与负荷 |
China National Standards Flat |
English PDF |
| GB/T 2978-2014 |
Size designation,dimensions,inFlation pressure and load capacity for passenger car tyres 轿车轮胎规格、尺寸、气压与负荷 |
China National Standards Flat |
English PDF |
| GB/T 11063-2014 |
Polyamide plate based Flat belt 聚酰胺片基平带 |
China National Standards Flat |
English PDF |
| GB/T 4996-2014 |
General-purpose Flat pallets for through transit of goods—Test methods 联运通用平托盘 试验方法 |
China National Standards Flat |
English PDF |
| GB/T 4995-2014 |
General-purpose Flat pallets for through transit of goods―Performance requirements and selection of tests 联运通用平托盘 性能要求和试验选择 |
China National Standards Flat |
English PDF |
| GB/T 31148-2014 |
General-purpose Flat pallets for through transit of goods―Wooden flat pallet 联运通用平托盘 木质平托盘 |
China National Standards Flat |
English PDF |
| GB/T 30955-2014 |
Determination of aFlatoxin B1, B2, G1, G2 content in feeds―High performance liquid chromatography with immunoaffinity column clean-up 饲料中黄曲霉毒素B1、B2、G1、G2的测定 免疫亲和柱净化-高效液相色谱法 |
China National Standards Flat |
English PDF |
| GB/T 30586-2014 |
Copper clad aluminum Flat bars and wires manufactured by continuous-casting and rolling 连铸轧制铜包铝扁棒、扁线 |
China National Standards Flat |
English PDF |
| GB/T 30480-2013 |
Woodworking machines―Hand-loading veneering presses for Flat surfaces―Nomenclature 木工机床 手动上料平面压机 术语 |
China National Standards Flat |
English PDF |
| GB/T 30196-2013 |
Self-supporting run Flat tyre 自体支撑型缺气保用轮胎 |
China National Standards Flat |
English PDF |
| GB/T 20014.18-2013 |
Good agricultural practice―Part 18: Intertidal mudFlat culture/ hanging culture/ bottom-sowing culture base control points and compliance criteria 良好农业规范 第18部分：水产滩涂、吊养、底播养殖基础控制点与符合性规范 |
China National Standards Flat |
English PDF |
| GB 21340-2013 |
The norm of energy consumption per unit product of Flat glass 平板玻璃单位产品能源消耗限额 |
China National Standards Flat |
English PDF |
| GB 24850-2013 |
Minimum allowable values of energy efficiency and energy efficiency grades for Flat panel televisions 平板电视能效限定值及能效等级 |
China National Standards Flat |
English PDF |
| GB/T 29507-2013 |
Test method for measuring Flatness, thickness and total thickness variation on silicon wafers by automated non-contact scanning 硅片平整度、厚度及总厚度变化测试 自动非接触扫描法 |
China National Standards Flat |
English PDF |
| GB/T 9945-2012 |
Hot-rolled bulb Flats 热轧球扁钢 |
China National Standards Flat |
English PDF |
| GB/T 28804-2012 |
Copper-free silver mirror on Flat glass 无铜镀银玻璃镜 |
China National Standards Flat |
English PDF |
| GB/T 28387.5-2012 |
Safety requirements of the design and construction of printing and paper converting machines - Part 5：Machines for the production of corrugated board and machines for the conversion of Flat and corrugated board 印刷机械和纸加工机械的设计及结构安全规则 第5部分：瓦楞纸板生产机械以及纸板和瓦楞纸板加工设备 |
China National Standards Flat |
English PDF |
| GB/T 28384-2012 |
Flat-type planographic screen-process press 平台式平型网版印刷机 |
China National Standards Flat |
English PDF |
| GB 28261-2012 |
Technical specification of safety production for gas generator initiator for air inFlator 安全气囊气体发生器用点火具生产安全技术条件 |
China National Standards Flat |
English PDF |
| GB/T 27708-2011 |
General technical requirements of inFlatable toys 充气玩具通用技术要求 |
China National Standards Flat |
English PDF |
| GB/T 14566.3-2011 |
Specification and type for bursting discs - Part 3：Flat bursting discs 爆破片型式与参数 第3部分：平板形爆破片 |
China National Standards Flat |
English PDF |
| GB/T 26974-2011 |
Specification for absorber of Flat plate solar collector 平板型太阳能集热器吸热体技术要求 |
China National Standards Flat |
English PDF |
| GB/T 26978.5-2011 |
Design and manufacture of site built, vertical, cylindrical Flat-bottomed steel tanks for the storage of liquefied nature gases - Part 5: Testing, drying, purging and cool-down 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第5部分：试验、干燥、置换及冷却 |
China National Standards Flat |
English PDF |
| GB/T 26978.4-2011 |
Design and manufacture of site built, vertical, cylindrical, Flat-bottomed steel tanks for the storage of liquefied nature gases - Part 4: Insulation components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第4部分：绝热构件 |
China National Standards Flat |
English PDF |
| GB/T 26978.3-2011 |
Design and manufacture of site built, vertical, cylindrical,Flat-bottomed steel tanks for the storage of liquefied nature gases - Part 3: Concrete components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第3部分：混凝土构件 |
China National Standards Flat |
English PDF |
| GB/T 26978.2-2011 |
Design and manufacture of site built, vertical, cylindrical Flat-bottomed steel tanks for the storage of liquefied nature gases - Part 2: Metallic components 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第2部分：金属构件 |
China National Standards Flat |
English PDF |
| GB/T 26978.1-2011 |
Design and manufacture of site built, vertical, cylindrical，Flat-bottomed steel tanks for the storage of liquefied nature gases - Part 1: General 现场组装立式圆筒平底钢质液化天然气储罐的设计与建造 第1部分：总则 |
China National Standards Flat |
English PDF |
| GB/T 26466-2011 |
Stationary Flat steel ribbon wound vessels for storage of high pressure hydrogen 固定式高压储氢用钢带错绕式容器 |
China National Standards Flat |
English PDF |
| GB 26453-2011 |
Emission standard of air pollutants for Flat glass industry 平板玻璃工业大气污染物排放标准 |
China National Standards Flat |
English PDF |
| GB/T 25279-2010 |
Hollow fiber Flat-plat membrane module 中空纤维帘式膜组件 |
China National Standards Flat |
English PDF |
| GB 25115.5-2010 |
Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers,feeders and folders 工业洗涤机械的安全要求 第5部分：熨平机、送料机和折叠机 |
China National Standards Flat |
English PDF |
| GB 5413.37-2010 |
National Food Safety Standard-Determination of aFlatoxin M1 in milk and milk products 食品安全国家标准 乳和乳制品中黄曲霉毒素M1的测定 |
China National Standards Flat |
English PDF |
| GB 5009.24-2010 |
National Food Safety Standard-Determination of aFlatoxin M1 and B1 in foods 食品安全国家标准 食品中黄曲霉毒素M1和B1的测定 |
China National Standards Flat |
English PDF |
| GB/T 24685-2009 |
Flatting and puddling paddy field machine 水田平地搅浆机 |
China National Standards Flat |
English PDF |
| GB/T 24630.2-2009 |
Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators 产品几何技术规范（GPS） 平面度 第2部分：规范操作集 |
China National Standards Flat |
English PDF |
| GB/T 24630.1-2009 |
Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness 产品几何技术规范（GPS） 平面度 第1部分：词汇和参数 |
China National Standards Flat |
English PDF |
| GB/T 6621-2009 |
Testing methods for surface Flatness of silicon slices 硅片表面平整度测试方法 |
China National Standards Flat |
English PDF |
| GB/T 13388-2009 |
Method for measuring crystallographic orientation of Flats on single-crystal silicon slices and wafers by X-ray techniques 硅片参考面结晶学取向X射线测试方法 |
China National Standards Flat |
English PDF |
| GB/T 13387-2009 |
Test method for measuring Flat length wafers of silicon and other electronic materials 硅及其它电子材料晶片参考面长度测量方法 |
China National Standards Flat |
English PDF |
| GB 50527-2009 |
Code for design of energy conservation of Flat glass plant 平板玻璃工厂节能设计规范 |
China National Standards Flat |
English PDF |
| GB/T 23898-2009 |
Wood-based panel for wooden Flat pallets 木质平托盘用人造板 |
China National Standards Flat |
English PDF |
| GB/T 20528.2-2009 |
Ergonomics requirements for work with visual display based on Flat panels - Part 2: Ergonomics requirements for flat panel displays 使用基于平板视觉显示器工作的人类工效学要求 第2部分：平板显示器的人类工效学要求 |
China National Standards Flat |
English PDF |
| GB/T 2980-2009 |
Size designation, dimensions, inFlation pressure and load capacity for earth-mover tyres 工程机械轮胎规格、尺寸、气压与负荷 |
China National Standards Flat |
English PDF |
| GB 11614-2009 |
Flat glass 平板玻璃 |
China National Standards Flat |
English PDF |
| GB/T 23303-2009 |
Ships and marine technology - InFlatable rescue boats - Coated fabrics for inflatable chambers 船舶与海上技术 充气式救助艇 充气腔用胶布 |
China National Standards Flat |
English PDF |
| GB/T 23298-2009 |
Ships and marine technology - Gas inFlation systems for inflatable life-saving appliances 船舶与海上技术 气胀式救生装置用充气系统 |
China National Standards Flat |
English PDF |
| GB/T 23212-2008 |
Determination of aFlatoxin B1, B2, G1, G2, M1, M2 content in milk and milk powder - HPLC-fluorescence detection method 牛奶和奶粉中黄曲霉毒素B1、B2、G1、G2、M1、M2的测定 液相色谱-荧光检测法 |
China National Standards Flat |
English PDF |
| GB/T 22906.9-2008 |
Testing of cores - Part 9: Determination of Flat crush resistance 纸芯的测定 第9部分：平压强度的测定 |
China National Standards Flat |
English PDF |
| GB/T 22874-2008 |
Single-faced and single-wall corrugated fibreboard - Determination of Flat crush resistance 单面和单瓦楞纸板 平压强度的测定 |
China National Standards Flat |
English PDF |
| GB/T 22636-2008 |
Door leaves - Dimensions, rectangularity and Flatness - Test method 门扇 尺寸、直角度和平面度检测方法 |
China National Standards Flat |
English PDF |
| GB/T 8381-2008 |
Determination of aFlatoxin B1 in animal feeding stuffs - Semi-quantitative thin layer chromatographic methods 饲料中黄曲霉毒素B1的测定 半定量薄层色谱法 |
China National Standards Flat |
English PDF |
| GB/T 17480-2008 |
Determination of aFlatoxin B1 in animal feeding stuffs - Enzyme-linked immunosorbent assay 饲料中黄曲霉毒素B1的测定 酶联免疫吸附法 |
China National Standards Flat |
English PDF |
| GB/T 15764-2008 |
Standard terminology of Flat glass 平板玻璃术语 |
China National Standards Flat |
English PDF |
| GB/T 9126-2008 |
Dimensions of non-metallic Flat gaskets for pipe flanges 管法兰用非金属平垫片 尺寸 |
China National Standards Flat |
English PDF |
| GB/T 18788-2008 |
General specification for Flatbed scanner 平板式扫描仪通用规范 |
China National Standards Flat |
English PDF |
| GB/T 2885.5-2008 |
Narrow gauge mine cars - Part 5: Flat deck car 矿用窄轨车辆 第5部分: 平板车 |
China National Standards Flat |
English PDF |
| GB/T 17030-2008 |
Polyvinylidene chloride (PVDC) Flat-film for food-packaging 食品包装用聚偏二氯乙烯（PVDC）片状肠衣膜 |
China National Standards Flat |
English PDF |
| GB/T 2979-2008 |
Size desination,dimensions,inFlation pressure and load capacity for agricultural tyres 农业轮胎规格、尺寸、气压与负荷 |
China National Standards Flat |
English PDF |
| GB/T 2977-2008 |
Size designation，dimensions，inFlation pressure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards Flat |
English PDF |
| GB/T 972-2008 |
Thread rolling Flat dies 搓丝板 |
China National Standards Flat |
English PDF |
| GB/T 21899-2008 |
Mowing and Flattening machine 割草压扁机 |
China National Standards Flat |
English PDF |
| GB/T 15307-2008 |
Drills with Indexable inserts - Cylindrical shanks with a parallel Flat 可转位钻头用削平直柄 |
China National Standards Flat |
English PDF |
| GB/T 524-2007 |
Flat transmission belt 平型传动带 |
China National Standards Flat |
English PDF |
| GB/T 6424-2007 |
Flat plate solar collectors 平板型太阳能集热器 |
China National Standards Flat |
English PDF |
| GB/T 21159.2-2007 |
Equipment for sowing and planting - Disk - part 2: Flat disks type D2 with single bevel - Dimensions 播种和种植机械 圆盘 第2部分：D2型单边倒角的平面圆盘 尺寸 |
China National Standards Flat |
English PDF |
| GB/T 2934-2007 |
General-purpose Flat pallets for through transit of goods - Principal dimensions and tolerances 联运通用平托盘 主要尺寸及公差 |
China National Standards Flat |
English PDF |
| GB/T 246-2007 |
Metal materials-Tube - Flattening test 金属管 压扁试验方法 |
China National Standards Flat |
English PDF |
| GB/T 20897.2-2007 |
InFlatable boats - Part 2: Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive 充气艇 第2部分: 发动机最大额定功率为4.5kW～15kW的艇 |
China National Standards Flat |
English PDF |
| GB/T 77-2007 |
Hexagon socket set screws with Flat point 内六角平端紧定螺钉 |
China National Standards Flat |
English PDF |
| GB/T 328.7-2007 |
Test methods for building sheets for waterproofing - Part 7: Plastic and rubber sheets for waterproofing-length,width,straightness and Flatness 建筑防水卷材试验方法 第7部分：高分子防水卷材 长度、宽度、平直度和平整度 |
China National Standards Flat |
English PDF |
| GB/T 20897.1-2007 |
InFlatable boats - Part 1: Boats with a maximum motor power rating of 4.5kW 充气艇 第1部分：发动机最大额定功率为4.5kW的艇 |
China National Standards Flat |
English PDF |
| GB/T 5340.1-2006 |
End mill with indexable inserts - Part 1: End mill with Flatted parallel shank 可转位立铣刀 第1部分：削平直柄立铣刀 |
China National Standards Flat |
English PDF |
| GB/T 4169.15-2006 |
Components of injection moulds for plastics - Part 15: Flat ejector pin 塑料注射模零件 第15部分: 扁推杆 |
China National Standards Flat |
English PDF |
| GB/T 20528.1-2006 |
Ergonomic requirements for work with visual displays based on Flat panels - Part 1: Introduction 使用基于平板视觉显示器工作的人类工效学要求 第1部分：概述 |
China National Standards Flat |
English PDF |
| GB/T 5009.23-2006 |
Determination of aFlatoxins B1,B2,G1,G2 in foods 食品中黄曲霉毒素B1、B2、G1、G2的测定 |
China National Standards Flat |
English PDF |
| GB/T 6133.2-2006 |
Tool chucks for Flated parallel shank tools - Part 2: Connecting dimensions of chucks and designation 削平型直柄刀具夹头 第2部分: 夹头的连接尺寸和标记 |
China National Standards Flat |
English PDF |
| GB/T 6133.1-2006 |
Tool chucks for Flated parallel shank tools - part 1: Dimensions of the driving system of tool shanks 削平型直柄刀具夹头 第1部分：刀具柄部传动系统的尺寸 |
China National Standards Flat |
English PDF |
| GB/T 6131.2-2006 |
Cylindrical shanks for milling cutters - part 2: Types and sizes of Flatted cylindrical shanks 铣刀直柄 第2部分：削平直柄的型式和尺寸 |
China National Standards Flat |
English PDF |
| GB/T 20119-2006 |
Flat steel wire ropes for balance 平衡用扁钢丝绳 |
China National Standards Flat |
English PDF |
| GB/T 19949.3-2005 |
Road vehicle Airbag components Part3:Testing of inFlator assemblies 道路车辆 安全气囊部件 第3部分:气体发生器总成试验 |
China National Standards Flat |
English PDF |
| Find out:247Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
