China National Standards

China Gears GB Standards List


  •  China "Gears" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/Z 3480.22-2024 Calculation of load capacity of spur and helical Gears - Part 22: Calculation of load capacity of micropitting {译}
    直齿轮和斜齿轮承载能力计算-第22部分:微点蚀承载能力计算
    China National Standards
    Gears

    English PDF
    GB/Z 3480.4-2024 Calculation of load capacity of spur and helical Gears - Part 4: Calculation of load capacity of tooth surface fracture {译}
    直齿轮和斜齿轮承载能力计算-第4部分:齿面断裂承载能力计算
    China National Standards
    Gears

    English PDF
    GB/T 19936.2-2024 Gears - FZG test procedure - Part 2: Relative bonding load capacity of high extreme pressure oils FZG step loading test A10/16.6R/120 {译}
    齿轮-FZG试验程序-第2部分:高极压油的相对胶合承载能力FZG阶梯加载试验A10/16.6R/120
    China National Standards
    Gears

    English PDF
    GB/T 17879-2023 Gears - chemical etching test for surface tempering after grinding {译}
    齿轮 磨削后表面回火的化学浸蚀检验
    China National Standards
    Gears

    English PDF
    GB/T 10095.1-2022 Cylindrical Gears - ISO tooth surface tolerance classification system - Part 1: Definition and permissible values of tooth surface deviations {译}
    圆柱齿轮 ISO齿面公差分级制 第1部分:齿面偏差的定义和允许值
    China National Standards
    Gears

    English PDF
    GB/T 3480.5-2021 Calculation of load capacity of spur and helical Gears—Part 5:Strength and quality of materials
    直齿轮和斜齿轮承载能力计算 第5部分:材料的强度和质量
    China National Standards
    Gears

    English PDF
    GB/T 3480.3-2021 Calculation of load capacity of spur and helical Gears—Part 3: Calculation of tooth bending strength
    直齿轮和斜齿轮承载能力计算 第3部分:轮齿弯曲强度计算
    China National Standards
    Gears

    English PDF
    GB/T 3480.2-2021 Calculation of load capacity of spur and helical Gears—Part 2: Calculation of surface durability (pitting)
    直齿轮和斜齿轮承载能力计算 第2部分:齿面接触强度(点蚀)计算
    China National Standards
    Gears

    English PDF
    GB/T 38805-2020 Technical requirements of heat treatment for heavy duty Gears
    重载齿轮热处理技术要求
    China National Standards
    Gears

    English PDF
    GB/T 39430-2020 Specifications for the blanks of high reliability Gears
    高可靠性齿轮毛坯技术要求
    China National Standards
    Gears

    English PDF
    GB/T 39332-2020 General requirements for the anti-fatigue manufacturing of precision Gears
    高精度齿轮抗疲劳制造通用技术要求
    China National Standards
    Gears

    English PDF
    GB/T 3480.1-2019 Calculation of load capacity of spur and helical Gears—Part 1: Basic principles, introduction and general influence factors
    直齿轮和斜齿轮承载能力计算 第1部分:基本原理、概述及通用影响系数
    China National Standards
    Gears

    English PDF
    GB/T 3480.6-2018 Calculation of load capacity of spur and helical Gears—Part 6:Calculation of service life under variable load
    直齿轮和斜齿轮承载能力计算-第6部分:变载荷条件下的使用寿命计算
    China National Standards
    Gears

    English PDF
    GB/T 37161-2018 Gears—Evaluation of instruments for measurement of individual gears
    齿轮-齿轮测量仪的评价
    China National Standards
    Gears

    English PDF
    GB/T 10085-2018 Basic paramaters of cylindrical worm Gears
    圆柱蜗杆传动基本参数
    China National Standards
    Gears

    English PDF
    GB/T 32256-2015 Steel forgings for rings for reduction Gears—General specification
    钢质减速齿环锻件 通用技术条件
    China National Standards
    Gears

    English PDF
    GB/T 30104.210-2013 Digital addressable lighting interface―Part 210: Particular requirements for control Gears―Sequencer (Device Type 9)
    数字可寻址照明接口 第210部分:控制装置的特殊要求 程序装置(设备类型9)
    China National Standards
    Gears

    English PDF
    GB/T 29127-2012 Measures for periodic servicing and maintenance of lifeboats and release Gears
    救生艇及吊钩释放系统定期检验维护方法
    China National Standards
    Gears

    English PDF
    GB/T 26777-2011 Semitrailer landing Gears
    挂车支撑装置
    China National Standards
    Gears

    English PDF
    GB/T 25509-2010 Mechanical systems and components for general use - Reference dictionary for Gears
    机械系统和通用件 齿轮参考字典
    China National Standards
    Gears

    English PDF
    GB/T 22775-2008 Gears for timekeeping instruments - Contrate gears
    计时仪器用齿轮 端面齿轮
    China National Standards
    Gears

    English PDF
    GB/Z 22559.2-2008 Gears - Thermal capacity - Part 2: Thermal load-carrying capacity
    齿轮 热功率 第2部分:热承载能力计算
    China National Standards
    Gears

    English PDF
    GB/T 3480.5-2008 Calculation of load capacity of spur and helical Gears - Part 5: Strength and quality of materials
    直齿轮和斜齿轮承载能力计算 第5部分:材料的强度和质量
    China National Standards
    Gears

    English PDF
    GB/T 1357-2008 Cylindrical Gears for general engineering and for heavy engineering - Modules
    通用机械和重型机械用圆柱齿轮 模数
    China National Standards
    Gears

    English PDF
    GB/T 13924-2008 Inspection code for accuracy of involute cylindrical Gears
    渐开线圆柱齿轮精度 检验细则
    China National Standards
    Gears

    English PDF
    GB/Z 18620.4-2008 Cylindrical Gears - Code of inspection practice - Part 4: Reommendations relative to surface texture and tooth contact pattern checking
    圆柱齿轮 检验实施规范 第4部分:表面结构和轮齿接触斑点的检验
    China National Standards
    Gears

    English PDF
    GB/Z 18620.3-2008 Cylindrical Gears - Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
    圆柱齿轮 检验实施规范 第3部分: 齿轮坯、轴中心距和轴线平行度的检验
    China National Standards
    Gears

    English PDF
    GB/Z 18620.2-2008 Cylindrical Gears - Code of inspection practice - Part 2: Inspetion related to radial composite deviations,runout, tooth thickness and backlash
    圆柱齿轮 检验实施规范 第2部分: 径向综合偏差、径向跳动、齿厚和侧隙的检验
    China National Standards
    Gears

    English PDF
    GB/Z 18620.1-2008 Cylindrical Gears - Code of inspection practice-Part 1: Inspection of corresponding flanks of gear teeth
    圆柱齿轮 检验实施规范 第1部分: 轮齿同侧齿面的检验
    China National Standards
    Gears

    English PDF
    GB/T 10095.2-2008 Cylindrical Gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
    圆柱齿轮 精度制 第2部分:径向综合偏差与径向跳动的定义和允许值
    China National Standards
    Gears

    English PDF
    GB/T 10095.1-2008 Cylindrical Gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
    圆柱齿轮 精度制 第1部分:轮齿同侧齿面偏差的定义和允许值
    China National Standards
    Gears

    English PDF
    GB/T 6960.4-2007 Tractor terminology - Part 4: Running Gears and undercarriages
    拖拉机术语 第4部分:行走系
    China National Standards
    Gears

    English PDF
    GB/T 20716.2-2006 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 2: Connectors for braking systems and running Gears of vehicles with 12V nominal supply voltage
    道路车辆 牵引车和挂车之间的电连接器 第2部分:12V标称电压车辆的制动系统和行走系的连接
    China National Standards
    Gears

    English PDF
    GB/T 20716.1-2006 Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Part 1: Connectors for braking systems and running Gears of vehicles with 24V nominal supply voltage
    道路车辆 牵引车和挂车之间的电连接器 第1部分:24V标称电压车辆的制动系统和行走系的连接
    China National Standards
    Gears

    English PDF
    GB/T 19936.1-2005 Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils
    齿轮 FZG 试验程序 第1部分:油品的相对胶合承载能力 FZG 试验方法 A/8.3/90
    China National Standards
    Gears

    English PDF
    GB/T 19935-2005 Worm Gears-Geometry of worms-Name plates for worm gear units,centre distances,information to be supplied to gear manufacturer by the purchaser
    蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数
    China National Standards
    Gears

    English PDF
    GB/Z 6413.2-2003 Calculation of scuffing load capacity of cylindrical,bevel and hypoid Gears--Part 2:Integral temperature method
    圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第2部分:积分温度法
    China National Standards
    Gears

    English PDF
    GB/Z 6413.1-2003 Calculation of scuffing load capacity of cylindrical,bevel and hypoid Gears--Part 1:Flash temperature method
    圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第1部分:闪温法
    China National Standards
    Gears

    English PDF
    GB/T 19406-2003 Calculation methods of load capacity for involute cylindrical spur and helical Gears--Application for industrical gears
    渐开线直齿和斜齿圆柱齿轮承载能力计算方法 工业齿轮应用
    China National Standards
    Gears

    English PDF
    GB/T 4459.2-2003 Mechanical drawings--Conventional representation of Gears
    机械制图 齿轮表示法
    China National Standards
    Gears

    English PDF
    GB/T 1356-2001 Cylindrical Gears for general and heavy engineering--Standard basic rack tooth profile
    通用机械和重型机械用圆柱齿轮 标准基本齿条齿廓
    China National Standards
    Gears

    English PDF
    GB/T 17879-1999 Gears--Surface temper etch inspection after grinding
    齿轮 磨削后表面回火的浸蚀检验
    China National Standards
    Gears

    English PDF
    GB/T 3480-1997 Calculation methods of load capacity for involute cylindrical Gears
    渐开线圆柱齿轮承载能力计算方法
    China National Standards
    Gears

    English PDF
    GB/T 7631.7-1995 Lubricants and related products (class L)--Classification--Part 7:Family C (Gears)
    润滑剂和有关产品(L类)的分类 第7部分:C组(齿轮)
    China National Standards
    Gears

    English PDF
    GB/T 14230-1993 Standard of test method for bending load capacity of Gears
    齿轮弯曲疲劳强度试验方法
    China National Standards
    Gears

    English PDF
    GB/T 14229-1993 Standard of test method for surface load capacity of Gears
    齿轮接触疲劳强度试验方法
    China National Standards
    Gears

    English PDF
    GB/T 3374-1992 Basic terminology of Gears
    齿轮基本术语
    China National Standards
    Gears

    English PDF
    GB/T 13672-1992 Standard test method for scuffing load capacity of Gears
    齿轮胶合承载能力试验方法
    China National Standards
    Gears

    English PDF
    GB/T 12759-1991 Double-circular-arc tooth profile of basic rack for cylindrical Gears
    双圆弧圆柱齿轮基本齿廓
    China National Standards
    Gears

    English PDF
    GB/T 2363-1990 Accuracy of fine-pitch involute cylindrical Gears
    小模数渐开线圆柱齿轮精度
    China National Standards
    Gears

    English PDF
    GB/T 2362-1990 Basic rack tooth profile of fine-pitch involute cylindrical Gears
    小模数渐开线圆柱齿轮基本齿廓
    China National Standards
    Gears

    English PDF
    GB/T 12371-1990 Bevel Gears--Information of the dimensional data to be given on the drawing
    锥齿轮 图样上应注明的尺寸数据
    China National Standards
    Gears

    English PDF
    GB/T 12370-1990 Terminology for bevel and hypoid Gears
    锥齿轮和准双曲面齿轮 术语
    China National Standards
    Gears

    English PDF
    GB/T 12369-1990 Basic tooth profile of straight and skew bevel Gears
    直齿及斜齿锥齿轮基本齿廓
    China National Standards
    Gears

    English PDF
    GB/T 12368-1990 Modules of bevel Gears
    锥齿轮模数
    China National Standards
    Gears

    English PDF
    GB/T 11365-1989 Accuracy of bevel and hypoid Gears
    锥齿轮和准双曲面齿轮 精度
    China National Standards
    Gears

    English PDF
    GB/T 10225-1988 Accuracy of fine-pitch bevel Gears
    小模数锥齿轮精度
    China National Standards
    Gears

    English PDF
    GB/T 10224-1988 Basic rack tooth profile of fine-pitch bevel Gears
    小模数锥齿轮基本齿廓
    China National Standards
    Gears

    English PDF
    GB/T 10085-1988 Basic parameters of cylindrical worm Gears
    圆柱蜗杆传动基本参数
    China National Standards
    Gears

    English PDF
    GB/T 10063-1988 Simplified methods for the calculation of load capacity of involute cylindrical Gears for general machines
    通用机械渐开线圆柱齿轮 承载能力简化计算方法
    China National Standards
    Gears

    English PDF
    GB/T 6443-1986 Involute cylindrical Gears--Information of the dimensional data to be given on the drawing
    渐开线圆柱齿轮图样上应注明的尺寸数据
    China National Standards
    Gears

    English PDF

    Find out:61Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards