Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43149-2023 |
Design and metrological characteristics of Height calipers {译} 高度卡尺的设计和计量特性 |
China National Standards Height |
 English PDF |
| GB/T 26949.21-2023 |
Industrial vehicle stability verification Part 21: Picking vehicles with operator position lifting Height greater than 1 200 mm {译} 工业车辆 稳定性验证 第21部分：操作者位置起升高度大于1 200 mm的拣选车 |
China National Standards Height |
English PDF |
| GB/T 26949.4-2022 |
Industrial vehicles—Verification of stability—Part 4: Pallet stackers, double-deck stackers and orderers with a lift Height not greater than 1 200 mm at the operator's position {译} 工业车辆 稳定性验证 第4部分：托盘堆垛车、双层堆垛车和操作者位置起升高度不大于1 200 mm的拣选车 |
China National Standards Height |
English PDF |
| GB/T 10068-2020 |
Mechanical vibration of certain machines with shaft Heights 56 mm and higher—Measurement, evaluation and limits of vibration severity 轴中心高为56mm及以上电机的机械振动 振动的测量、评定及限值 |
China National Standards Height |
English PDF |
| GB/T 37852-2019 |
Class containers—Height and non-parallelism of finish with reference to container base—Test methods 玻璃容器 以容器底部作基准的高度和口部不平行度 试验方法 |
China National Standards Height |
English PDF |
| GB/T 37810-2019 |
General matching specification for large cutting Height mining face 大采高综采工作面总体配套技术条件 |
China National Standards Height |
English PDF |
| GB/T 36228-2018 |
Non-destructive testing—Guide for plannar flaw Height sizing by ultrasonic testing 无损检测 平面型伤高度超声定量导则 |
China National Standards Height |
English PDF |
| GB/T 35030-2018 |
Determination methods for launching Height,launching deflection angle and radiation radius of fireworks 烟花发射高度、发射偏斜角、辐射半径测定方法 |
China National Standards Height |
English PDF |
| GB/T 33217-2016 |
Burr Height for stampings 冲压件毛刺高度 |
China National Standards Height |
English PDF |
| GB/T 26949.4-2016 |
Industrial trucks—Verification of stability—Part 4: Pallet stackers,double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift Height 工业车辆 稳定性验证 第4部分：托盘堆垛车、双层堆垛车和操作者位置起升高度不大于1200mm的拣选车 |
China National Standards Height |
English PDF |
| GB/T 30165-2013 |
Textile machinery and accessories―Latch-type needles for knitting machines―Coordination of shank widths and hook Heights 纺织机械与附件 针织机用舌针 针杆厚度和针钩高度的对应尺寸 |
China National Standards Height |
English PDF |
| GB/T 29525-2013 |
Chair Height adjustment gas spring - Technical specification 座椅升降气弹簧 技术条件 |
China National Standards Height |
English PDF |
| GB/T 3608-2008 |
Classification of work at Heights 高处作业分级 |
China National Standards Height |
English PDF |
| GB/T 10175.2-2008 |
Earth moving machinery - Loaders and backhoe loaders - Part 2: Test method for measuring breakout forces and lift capacity to maximum lift Height 土方机械 装载机和挖掘装载机 第2部分：掘起力和最大提升高度提升能力的测试方法 |
China National Standards Height |
English PDF |
| GB/T 22094-2008 |
Height measuring instrument with electronic digital display 电子数显测高仪 |
China National Standards Height |
English PDF |
| GB 10068-2008 |
Mechanical vibration of certain machines with shaft Heights 56 mm and higher-measurement,evaluation and limits of vibration severity 轴中心高为56 mm及以上电机的机械振动 振动的测量、评定及限值 |
China National Standards Height |
English PDF |
| GB/T 21948.2-2008 |
Test conditions for CNC milling machines with table of variable Height - Testing of accuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分：立式铣床 |
China National Standards Height |
English PDF |
| GB/T 21948.1-2008 |
Test conditions for CNC milling machines with table of variable Height - Testing of accuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分：卧式铣床 |
China National Standards Height |
English PDF |
| GB/T 21390-2008 |
Vernier, dial and digital display Height callipers 游标、带表和数显高度卡尺 |
China National Standards Height |
English PDF |
| GB/T 18778.3-2006 |
Geometrical Product Specifications(GPS) - Surface texture: Profile method - Surface having stratified functional properties - Part 3: Height characterization using the material probability curve 产品几何技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第3部分: 用概率支承率曲线表征高度特性 |
China National Standards Height |
English PDF |
| GB/T 20427-2006 |
Height setting micrometers and riser blocks 可调高度测微仪及其垫高块 |
China National Standards Height |
English PDF |
| GB/T 3932.2-2006 |
Test conditions for manually controlled milling machines with table of fixed Height - Testing of the accuracy - Part 2: Machines with vertical spindle 床身铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards Height |
English PDF |
| GB/T 3932.1-2006 |
Test conditions for manually controlled milling machines with table of fixed Height - Testing of the accuracy - Part 1: Machines with horizontal spindle 床身铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards Height |
English PDF |
| GB/T 12217-2005 |
Machines-Shaft Heights 机器 轴高 |
China National Standards Height |
English PDF |
| GB/T 18778.2-2003 |
Geometrical Product Specifications(GPS)--Surface texture: Profile method--Surface having stratified functional properties--Part 2: Height characterization using the linear material ratio curve 产品几何量技术规范(GPS) 表面结构 轮廓法 具有复合加工特征的表面 第2部分: 用线性化的支承率曲线表征高度特性 |
China National Standards Height |
English PDF |
| GB/T 3933.3-2002 |
Test conditions for milling machines with table of variable Height--Testing of accuracy--Part 3:Machines with vertical spindle 升降台铣床检验条件 精度检验 第3部分:立式铣床 |
China National Standards Height |
English PDF |
| GB/T 3933.2-2002 |
Test conditions for milling machines with table of variable Height--Testing of accuracy--Part 2:Machines with horizontal spindle 升降台铣床检验条件 精度检验 第2部分:卧式铣床 |
China National Standards Height |
English PDF |
| GB/T 790-1995 |
Overhead travelling crane--Span series and lifting Height series 电动桥式起重机跨度和起升高度系列 |
China National Standards Height |
English PDF |
| Find out:28Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
