Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 39560.12-2024 |
Determination of certain substances in electronic and electrical products-Part 12: SIMUltaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry {译} 电子电气产品中某些物质的测定-第12部分：气相色谱-质谱法同时测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯 |
China National Standards IMU |
 English PDF |
| GB/T 44126.2-2024 |
Road vehicles - Roller brake test bench test method for brake systems of vehicles with a maxIMUm allowable total mass of more than 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems {译} 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 |
China National Standards IMU |
English PDF |
| GB/T 18222.2-2024 |
Small craft - Determination of maxIMUm propulsion rating by maneuvering speed - Part 2: Craft with a hull length between 8m and 24m {译} 小艇-用操纵速度确定最大推进额定功率-第2部分：艇体长度在8m～24m之间的艇 |
China National Standards IMU |
English PDF |
| GB/T 43917.4-2024 |
Welding fume capture and separation equipment-Part 4: Determination of minIMUm air volume of capture device {译} 焊接烟尘捕集和分离设备-第4部分：捕集装置最小风量的测定 |
China National Standards IMU |
English PDF |
| GB/T 44000-2024 |
Space Environment - General Requirements for Ground SIMUlation Test Devices for Space Environment Effects on Materials {译} 空间环境-材料空间环境效应地面模拟试验装置通用要求 |
China National Standards IMU |
English PDF |
| GB/T 17592-2024 |
Textiles-Determination of drying rate at maxIMUm water absorption of fabrics {译} 纺织品-禁用偶氮染料的测定 |
China National Standards IMU |
English PDF |
| GB/T 43537-2023 |
Sound system equipment Headphones and personal music players MaxIMUm sound pressure level measurement method {译} 声系统设备 耳机及个人音乐播放器 最大声压级测量方法 |
China National Standards IMU |
English PDF |
| GB/T 12552-2023 |
MaxIMUm safe depth for industrial diving {译} 产业潜水最大安全深度 |
China National Standards IMU |
English PDF |
| GB/T 16886.23-2023 |
Biological evaluation of medical devices Part 23: StIMUlation test {译} 医疗器械生物学评价 第23部分：刺激试验 |
China National Standards IMU |
English PDF |
| GB 31610.5-2023 |
National food safety standards Inspection of ParagonIMUs in animal aquatic products and their products {译} 食品安全国家标准 动物性水产品及其制品中并殖吸虫的检验 |
China National Standards IMU |
English PDF |
| GB 31650-2019 |
National Food Safety Standards MaxIMUm Residue Limits of Veterinary Drugs in Food {译} 食品安全国家标准 食品中兽药最大残留限量 |
China National Standards IMU |
English PDF |
| GB 2763-2019 |
National Food Safety Standards MaxIMUm Residue Limits of Pesticides in Food {译} 食品安全国家标准 食品中农药最大残留限量 |
China National Standards IMU |
English PDF |
| GB/Z 21223.3-2023 |
Guidelines for statistical analysis of aging test data Part 3: MinIMUm number of specimens under different test conditions given test data {译} 老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量 |
China National Standards IMU |
English PDF |
| GB/T 43080.3-2023 |
Ventilators Ventilator efficiency classes Part 3: Ventilators without maxIMUm drive speed {译} 通风机 通风机效率等级 第3部分：不含驱动装置最高转速时的通风机 |
China National Standards IMU |
English PDF |
| GB/T 42992.1-2023 |
Chemicals SIMUlation tests to evaluate the biodegradability of chemical substances discharged from wastewater General principles {译} 化学品 评价废水中排放化学物质的生物降解性的模拟试验 通则 |
China National Standards IMU |
English PDF |
| GB/T 42833-2023 |
MinIMUm Performance Specifications for Beidou Satellite-Based Augmentation System Single-frequency Augmentation Service Airborne Equipment {译} 北斗星基增强系统单频增强服务机载设备最低性能规范 |
China National Standards IMU |
English PDF |
| GB/T 42854-2023 |
General technical specifications for civil aircraft customer training flight sIMUlators {译} 民用飞机客户培训飞行模拟机通用技术规范 |
China National Standards IMU |
English PDF |
| GB/T 42846-2023 |
Space environment Ground sIMUlation method of space radiation effects of non-metallic materials {译} 空间环境 非金属材料空间辐射效应地面模拟方法 |
China National Standards IMU |
English PDF |
| GB/T 20147.3-2023 |
Colorimetry Part 3: CIE TristIMUlus Values {译} 色度学 第3部分：CIE三刺激值 |
China National Standards IMU |
English PDF |
| GB/T 42661-2023 |
Corrosion of metals and alloys Test method for stress corrosion susceptibility of steel bars in sIMUlated marine environment {译} 金属和合金的腐蚀 模拟海洋环境中钢筋应力腐蚀敏感性试验方法 |
China National Standards IMU |
English PDF |
| GB/T 42599-2023 |
Wind power generation system electrical sIMUlation model verification {译} 风能发电系统 电气仿真模型验证 |
China National Standards IMU |
English PDF |
| GB/T 36237-2023 |
Wind Power Generation System General Electric SIMUlation Model {译} 风能发电系统 通用电气仿真模型 |
China National Standards IMU |
English PDF |
| GB/T 42383.5-2023 |
Intelligent Manufacturing Network Collaborative Design Part 5: Multidisciplinary Collaborative SIMUlation {译} 智能制造 网络协同设计 第5部分：多学科协同仿真 |
China National Standards IMU |
English PDF |
| GB/T 2423.24-2022 |
Environmental testing - Part 2: Test methods - Test S: SIMUlation of solar radiation on the ground and guidelines for solar radiation tests and weathering tests {译} 环境试验 第2部分：试验方法 试验S：模拟地面上的太阳辐射及太阳辐射试验和气候老化试验导则 |
China National Standards IMU |
English PDF |
| GB/T 41639-2022 |
Plastics Determination of disintegration rate of plastic materials under laboratory-scale sIMUlated composting conditions {译} 塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定 |
China National Standards IMU |
English PDF |
| GB/T 41543-2022 |
Space environment General specification for space environment effect sIMUlation test of aerospace materials {译} 空间环境 航天材料空间环境效应模拟试验通用规范 |
China National Standards IMU |
English PDF |
| GB/T 41398-2022 |
MinIMUm requirements for binocular barrel of microscope {译} 显微镜 双目镜筒最低要求 |
China National Standards IMU |
English PDF |
| GB/T 41309-2022 |
Nanotechnology, Endotoxin in vitro testing of nanomaterials, LIMUlus reagent method {译} 纳米技术 纳米材料的内毒素体外测试 鲎试剂法 |
China National Standards IMU |
English PDF |
| GB/T 23920-2022 |
Low-speed vehicles - MaxIMUm speed measurement method {译} 低速汽车 最高车速测定方法 |
China National Standards IMU |
English PDF |
| GB/T 13786-2022 |
SIMUlated Daylight Illumination of Cotton Grading Room {译} 棉花分级室的模拟昼光照明 |
China National Standards IMU |
English PDF |
| GB/T 30661.6-2022 |
Seats for wheelchairs - Part 6: SIMUlated use and determination of seat cushion performance changes {译} 轮椅车座椅 第6部分：模拟使用和座垫性能变化的测定 |
China National Standards IMU |
English PDF |
| GB/T 6538-2022 |
Determination of apparent viscosity of engine oil - Cold start sIMUlator method {译} 发动机油表观黏度的测定 冷启动模拟机法 |
China National Standards IMU |
English PDF |
| GB 9706.229-2021 |
Medical electrical equipment—Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy sIMUlators 医用电气设备 第2-29部分：放射治疗模拟机的基本安全和基本性能专用要求 |
China National Standards IMU |
English PDF |
| GB 9706.229-2021 |
Medical electrical equipment—Part 2-29:Particular requirements for the basic safety and essential performance of radiotherapy sIMUlators 医用电气设备 第2-29部分：放射治疗模拟机的基本安全和基本性能专用要求 |
China National Standards IMU |
English PDF |
| GB/T 12265-2021 |
Safety of machinery—MinIMUm gaps to avoid crushing of parts of the human body 机械安全 防止人体部位挤压的最小间距 |
China National Standards IMU |
English PDF |
| GB/T 40089-2021 |
Steel wire ropes for the petroleum and natural gas industries—MinIMUm requirements and terms of acceptance 石油和天然气工业用钢丝绳 最低要求和验收条件 |
China National Standards IMU |
English PDF |
| GB/T 39967-2021 |
5-axis sIMUltaneous machining center -- Accuracy of S-shaped test piece 五轴联动加工中心 S形试件精度检验 |
China National Standards IMU |
English PDF |
| GB/T 39953-2021 |
5-axis sIMUltaneous machining center—Testing of the accuracy for RTCP 五轴联动加工中心 RTCP精度检验 |
China National Standards IMU |
English PDF |
| GB/T 39926-2021 |
Hydraulic fluid power—Filter element test methods—Thermal conditioning and cold start-up sIMUlation 液压传动 滤芯试验方法 热工况和冷启动模拟 |
China National Standards IMU |
English PDF |
| GB/T 39819-2021 |
Conveyor belts—Determination of minIMUm transition distance on three idler rollers 输送带 三辊托辊最小过渡距离的确定 |
China National Standards IMU |
English PDF |
| GB/T 41073-2021 |
Surface chemical analysis -- Electron spectroscopies -- MinIMUm reporting requirements for peak fitting in X-ray photoelectron spectroscopy 表面化学分析 电子能谱 X射线光电子能谱峰拟合报告的基本要求 |
China National Standards IMU |
English PDF |
| GB/T 20076-2021 |
Measurement methods of maxIMUm torque and maximum net power of engines for motorcycles and mopeds 摩托车和轻便摩托车发动机最大扭矩和最大净功率测量方法 |
China National Standards IMU |
English PDF |
| GB 34914-2021 |
MinIMUm allowable value of water efficiency and water efficiency grades for water purifier 净水机水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB/T 40616-2021 |
Technical requirements for sIMUlation test of control system functions of the rural photovoltaic power station cluster 村镇光伏发电站集群控制系统仿真测试技术要求 |
China National Standards IMU |
English PDF |
| GB/T 40605-2021 |
Guidelines for modeling and testing of HVDC project digital-analog hybrid sIMUlation 高压直流工程数模混合仿真建模及试验导则 |
China National Standards IMU |
English PDF |
| GB/T 40601-2021 |
Technical requirements for real time digital sIMUlation technology of power system 电力系统实时数字仿真技术要求 |
China National Standards IMU |
English PDF |
| GB/T 40580-2021 |
Technical guide for modeling HVDC transmission systems in electromechanical transient sIMUlations 高压直流输电系统机电暂态仿真建模技术导则 |
China National Standards IMU |
English PDF |
| GB/T 40742.4-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minIMUm zone 产品几何技术规范（GPS） 几何精度的检测与验证 第4部分：尺寸和几何误差评定、最小区域的判别模式 |
China National Standards IMU |
English PDF |
| GB/T 40742.3-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 3:Functional gauges and fixtures—Verification when applying maxIMUm material requirements and minimum material requirements 产品几何技术规范（GPS） 几何精度的检测与验证 第3部分：功能量规与夹具 应用最大实体要求和最小实体要求时的检测与验证 |
China National Standards IMU |
English PDF |
| GB 12021.9-2021 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for electric fans 电风扇能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 40879-2021 |
MaxIMUm allowable values of energy efficiency and energy efficiency grades for data centers 数据中心能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 40876-2021 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for commercial induction cookers 商用电磁灶能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 21454-2021 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for multi-connected air-condition (heat pump) units 多联式空调（热泵）机组能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 39206-2020 |
Code of practice for installation and commissioning of fixed azIMUth thruster 固定式全回转舵桨装置安装与调试规程 |
China National Standards IMU |
English PDF |
| GB/T 39208-2020 |
Code of practice for installation and commissioning of retractable azIMUth thruster 可伸缩式全回转舵桨装置安装与调试规程 |
China National Standards IMU |
English PDF |
| GB 24850-2020 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for flat panel televisions and set-top boxes 平板电视与机顶盒能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 39177-2020 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for electric pressure cookers 电压力锅能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 24328.3-2020 |
Tissue paper and tissue products—Part 3: Determination of tensile strength, stretch at maxIMUm force and tensile energy absorption 卫生纸及其制品 第3部分: 抗张强度、最大力值时伸长率和抗张能量吸收的测定 |
China National Standards IMU |
English PDF |
| GB/T 38918-2020 |
Civil airplane landing gear structure design and sIMUlation 民用飞机起落架结构设计与仿真 |
China National Standards IMU |
English PDF |
| GB 24500-2020 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of industrial boilers 工业锅炉能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 20052-2020 |
MinIMUm allowable values of energy efficiency and the energy efficiency grades for power transformers 电力变压器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 19761-2020 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for fan 通风机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 18613-2020 |
MinIMUm allowable values of energy efficiency and values of efficiency grades for motors 电动机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 5137.3-2020 |
Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and sIMUlated weathering resistance tests 汽车安全玻璃试验方法 第3部分：耐辐照、高温、潮湿、燃烧和耐模拟气候试验 |
China National Standards IMU |
English PDF |
| GB/T 8243.14-2020 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start sIMUlation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法 第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验 |
China National Standards IMU |
English PDF |
| GB/T 38554-2020 |
General requirements for sIMUlation service used in cloud manufacturing 云制造仿真服务通用要求 |
China National Standards IMU |
English PDF |
| GB/T 24635.4-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using sIMUlation 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第4部分：应用仿真技术评估特定任务的测量不确定度 |
China National Standards IMU |
English PDF |
| GB/T 39413-2020 |
Performance requirements and test methods for BeiDou navigation satellite system signal sIMUlator 北斗卫星导航系统信号模拟器性能要求及测试方法 |
China National Standards IMU |
English PDF |
| GB/T 39334.5-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 5: Requirements of typical process simulation 机械产品制造过程数字化仿真 第5部分：典型工艺仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 39334.4-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 4: Requirements of NC machining process simulation 机械产品制造过程数字化仿真 第4部分：数控加工过程仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 39334.3-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 3: Requirements of assembly workshop logistics simulation 机械产品制造过程数字化仿真 第3部分：装配车间物流仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 39334.2-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 2: Requirements of production line planning and layout simulation 机械产品制造过程数字化仿真 第2部分：生产线规划和布局仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 39334.1-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 1: General requirements 机械产品制造过程数字化仿真 第1部分：通用要求 |
China National Standards IMU |
English PDF |
| GB 21455-2019 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for room air conditioners 房间空气调节器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 2763-2019 |
National food safety standard - MaxIMUm residue limits for pesticides in food 食品安全国家标准 食品中农药最大残留限量 |
China National Standards IMU |
English PDF |
| GB 38450-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of LED flat panel luminaires 普通照明用LED平板灯能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 38449-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grade of regenerative rolling reheating furnace 蓄热式轧钢加热炉能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 38448-2019 |
MinIMUm allowable values and grades of the energy efficiency and water efficiency for smart water closets 智能坐便器能效水效限定值及等级 |
China National Standards IMU |
English PDF |
| GB 30717-2019 |
MinIMUm allowable values of water efficiency and water efficiency grades for squatting pans 蹲便器水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB 28736-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for welding machines 电焊机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 28378-2019 |
MinIMUm allowable values of water efficiency and water efficiency grades for showers 淋浴器水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB 28377-2019 |
MinIMUm allowable values of water efficiency and water efficiency grades for urinals 小便器水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB 25501-2019 |
MinIMUm allowable values of water efficiency and water efficiency grades for faucets 水嘴水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB 38383-2019 |
The minIMUm allowable values of the energy，water consumption and grades for dishwashers 洗碗机能效水效限定值及等级 |
China National Standards IMU |
English PDF |
| GB 26920.3-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances—Part 3: Refrigerated beverage vending machines 商用制冷器具能效限定值和能效等级 第3部分：制冷自动售货机 |
China National Standards IMU |
English PDF |
| GB/T 37977.32-2019 |
Electrostatics—Part 3-2:Methods for sIMUlation of electrostatic effects—Machine model(MM)electrostatic discharge test waveform 静电学 第3-2部分:静电效应的模拟方法 机器模型(MM)的静电放电试验波形 |
China National Standards IMU |
English PDF |
| GB/T 37825-2019 |
Test method for sIMUlating wind pressure resistance of building glass under the uniform static loads 建筑玻璃均布静载模拟风压试验方法 |
China National Standards IMU |
English PDF |
| GB 19153-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for displacement air compressors 容积式空气压缩机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37485-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for submersible mixers of wastewater 污水处理用潜水推流式搅拌机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37484-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for precipitator 除尘器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37483-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for rotary aerator in wastewater treatment 污水处理用旋转曝气机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37480-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for low ambient temperature air source heat pumps（water chiller） packages 低环境温度空气源热泵（冷水）机组能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37479-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for ducted air conditioners 风管送风式空调机组能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37478-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of LED luminaires for road and tunnel lighting 道路和隧道照明用LED灯具能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 30255-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of LED products for indoor lighting 室内照明用LED产品能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 19576-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for unitary air conditioners 单元式空气调节机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 37586-2019 |
Technical regulation for sIMUlation on heat treatment process of heavy steel forgings 大型锻钢件热处理工艺模拟技术规范 |
China National Standards IMU |
English PDF |
| GB/T 37477-2019 |
SIMUlation test methods of surface support,launch and recovery for rescue system 救援装备水面搭载与吊放仿真试验方法 |
China National Standards IMU |
English PDF |
| GB/T 37322-2019 |
Test method for evaluating gasoline cleanliness—SIMUlation test of intake valve deposit (IVD) of gasoline engine 汽油清净性评价 汽油机进气阀沉积物模拟试验法 |
China National Standards IMU |
English PDF |
| GB/T 37320-2019 |
Ships and marine technology—Marine magnetic compasses, binnacles and azIMUth reading devices 船舶和海上技术 船用磁罗经、罗经柜和方位读数仪 |
China National Standards IMU |
English PDF |
| GB/T 37158-2018 |
Non-destructive testing—Test method for measuring the maxIMUm detectable steel thickness by industrial computed tomography(CT) 无损检测-工业计算机层析成像（CT）检测最大可检测钢厚度测试方法 |
China National Standards IMU |
English PDF |
| GB/T 37122-2018 |
Non-destructive testing—Phantom of maxIMUm detectable steel thickness for industrial computed tomography(CT) 无损检测-工业计算机层析成像（CT）-检测用最大可检测钢厚度测试卡 |
China National Standards IMU |
English PDF |
| GB/T 16430-2018 |
Determination of the minIMUm ignition temperature of dust layer 粉尘层最低着火温度测定方法 |
China National Standards IMU |
English PDF |
| GB/T 16425-2018 |
Determination for minIMUm explosive concentration of dust clouds 粉尘云爆炸下限浓度测定方法 |
China National Standards IMU |
English PDF |
| GB 36893-2018 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for air cleaners 空气净化器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GBZ/T 308-2018 |
SIMUltaneous determination of various metals in urine by inductively coupled plasma mass spectrometry 尿中多种金属同时测定-电感耦合等离子体质谱法 |
China National Standards IMU |
English PDF |
| GB 2763.1-2018 |
National Food Safety Standard - MaxIMUm residue limits for 43 pesticides such as paraquat in food 食品安全国家标准-食品中百草枯等43种农药最大残留限量 |
China National Standards IMU |
English PDF |
| GB/T 36237-2018 |
Wind turbines—Electrical sIMUlation models 风力发电机组 电气仿真模型 |
China National Standards IMU |
English PDF |
| GB/T 34880.3-2018 |
Inspection condition for 5-axis sIMUltaneous machining center—Part 3: Specifications 五轴联动加工中心检验条件 第3部分：技术条件 |
China National Standards IMU |
English PDF |
| GB/T 33260.4-2018 |
Capability of detection—Part 4: Methodology for comparing the minIMUm detectable value with a given value 检出能力 第4部分：最小可检出值与给定值的比较方法 |
China National Standards IMU |
English PDF |
| GB/T 18338-2018 |
Business machines—MinIMUm information to be included in specification sheets of duplicators 办公机械 速印机规格表中包含的基本内容 |
China National Standards IMU |
English PDF |
| GB/T 16671-2018 |
Geometrical product specifications (GPS)—Geometrical tolerancing—MaxIMUm material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) 产品几何技术规范（GPS） 几何公差 最大实体要求（MMR）、最小实体要求（LMR）和可逆要求（RPR） |
China National Standards IMU |
English PDF |
| GB 35971-2018 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for hermetic motor-compressor in room air conditioners 空气调节器用全封闭型电动机-压缩机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 8243.5-2018 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 5: Test for cold start sIMUlation and hydraulic pulse durability 内燃机全流式机油滤清器试验方法 第5部分：冷起动模拟和液压脉冲耐久试验 |
China National Standards IMU |
English PDF |
| GB/T 35916-2018 |
SIMUltaneous determination of 16 kinds of permitted sunscreen agents and other 8 kinds of ultraviolet absorbents in cosmetics—HPLC 化妆品中16种准用防晒剂和其他8种紫外线吸收物质的测定 高效液相色谱法 |
China National Standards IMU |
English PDF |
| GB/T 35010.6-2018 |
Semiconductor die products—Part 6: Requirements for concerning thermal sIMUlation 半导体芯片产品 第6部分：热仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 35010.5-2018 |
Semiconductor die products—Part 5：Requirements for concerning electrical sIMUlation 半导体芯片产品 第5部分：电学仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 17737.316-2018 |
Coaxial communication cables—Part 1-316:echanical test methods—Test for maxIMUm pulling force of cable 同轴通信电缆 第1-316部分：机械试验方法 电缆的最大抗拉力试验 |
China National Standards IMU |
English PDF |
| GB 34914-2017 |
MinIMUm allowable value of water efficiency and water efficiency grades for reverse osmosis drinking water treatment purifiers 反渗透净水机水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB/T 25102.8-2017 |
Electroacoustics—Hearing aids—Part 8: Methods of measurement of performance characteristics of hearing aids under sIMUlated in situ working conditions 电声学 助听器 第8部分：模拟实际工作条件下的助听器性能测量方法 |
China National Standards IMU |
English PDF |
| GB/T 34907-2017 |
Technical specifications and fitness for service evaluation method for thermal well casing under cyclic steam stIMUlation process 稠油蒸汽热采井套管技术条件与适用性评价方法 |
China National Standards IMU |
English PDF |
| GB/T 34880.2-2017 |
Test conditions for the 5-axis sIMUltaneous machining centers—Part 2: Testing of the accuracy for vertical machine 五轴联动加工中心检验条件 第2部分：立式机床精度检验 |
China National Standards IMU |
English PDF |
| GB/T 34880.1-2017 |
Test conditions for the 5-axis sIMUltaneous machining centers—Part 1: Testing of the accuracy for horizontal machine 五轴联动加工中心检验条件 第1部分：卧式机床精度检验 |
China National Standards IMU |
English PDF |
| GB/T 34394-2017 |
MaxIMUm working load for flat pallets 平托盘最大工作载荷 |
China National Standards IMU |
English PDF |
| GB/T 34569-2017 |
SIMUlation training system for live working 带电作业仿真训练系统 |
China National Standards IMU |
English PDF |
| GB/T 20897.3-2017 |
Inflatable boats—Part3: Boats with a maxIMUm motor power rating of 15 kW and greater 充气艇 第3部分：发动机最大额定功率为15 kW及以上的艇 |
China National Standards IMU |
English PDF |
| GB/T 34629-2017 |
Conveyor belts—Determination of minIMUm pulley diameters 输送带 最小滚筒直径的确定 |
China National Standards IMU |
English PDF |
| GB/T 34550.4-2017 |
Method for evaluation of cooling seawater treatment agents—Part 4: Dynamic sIMUlation test 海水冷却水处理药剂性能评价方法 第4部分：动态模拟试验 |
China National Standards IMU |
English PDF |
| GB/T 25498.5-2017 |
Electroacoustics—SIMUlators of human head and ear—Part 5：2 cm3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts 电声学 人头模拟器和耳模拟器 第5部分：测量助听器和以插入方式与人耳耦合的耳机用2cm3声耦合器 |
China National Standards IMU |
English PDF |
| GB/T 9574-2017 |
Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maxIMUm working pressure 橡胶和塑料软管及软管组合件 验证压力、爆破压力与最大工作压力的比率 |
China National Standards IMU |
English PDF |
| GB 24849-2017 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for household and similar microwave ovens 家用和类似用途微波炉能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 12021.6-2017 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for electric rice cookers 电饭锅能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 33707-2017 |
Meteorological solar sIMUlator 气象太阳模拟器 |
China National Standards IMU |
English PDF |
| GB 25502-2017 |
MinIMUm allowable values of water efficiency and water efficiency grades for water closets 坐便器水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB/T 35523-2017 |
Chemicals—Aerobic mineralisation in surface water—SIMUlation biodegradation test 化学品 地表水中好氧矿化 生物降解模拟试验 |
China National Standards IMU |
English PDF |
| GB/T 15544.4-2017 |
Short-circuit current calculation in three-phase a.c.systems—Part 4: Currents during two separate sIMUltaneous line-to-earth short circuits and partial short-circuit currents flowing through earth 三相交流系统短路电流计算 第4部分：同时发生两个独立单相接地故障时的电流以及流过大地的电流 |
China National Standards IMU |
English PDF |
| GB/T 26398-2017 |
Evaluation guide of detergence,water costing and saving for laundry detergents—SIMUlated household washing test method 衣料用洗涤剂去污性能、耗水量与节水性能评估指南 模拟家庭洗涤试验法 |
China National Standards IMU |
English PDF |
| GB/T 33267-2016 |
The interface of robot sIMUlation environment 机器人仿真开发环境接口 |
China National Standards IMU |
English PDF |
| GB/T 33012.3-2016 |
Road vehicles—Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy—Part 3: On-board transmitter sIMUlation 道路车辆 车辆对窄带辐射电磁能的抗扰性试验方法 第3部分：车载发射机模拟法 |
China National Standards IMU |
English PDF |
| GB/T 33150-2016 |
Five-axis sIMUltaneous control plano-milling machines with a traveling overhead cross raill—Testing of the accuracy 五轴联动高架横梁移动龙门铣床 精度检验 |
China National Standards IMU |
English PDF |
| GB 31604.9-2016 |
National Food Safety Standard-Food contact materials and products-Determination of heavy metals in food sIMUlants 食品安全国家标准 食品接触材料及制品 食品模拟物中重金属的测定 |
China National Standards IMU |
English PDF |
| GB/T 7247.9-2016 |
Safety of laser products—Part 9: Compilation of maxIMUm permissible exposure to incoherent optical radiation 激光产品的安全 第9部分：非相干光辐射最大允许照射量 |
China National Standards IMU |
English PDF |
| GB/T 32766-2016 |
Detection and identification of paralongidorus maxIMUs (Bütschli,1874) Siddiqi,1964 最大拟长针线虫检疫鉴定方法 |
China National Standards IMU |
English PDF |
| GB/T 7249-2016 |
MaxIMUm lamp outlines for incandescent lamps 白炽灯的最大外形尺寸 |
China National Standards IMU |
English PDF |
| GB/T 32591-2016 |
Railway applications—Current collection systems—Validation of sIMUlation of the dynamic interaction between pantograph and overhead contact line 轨道交通 受流系统 受电弓与接触网动态相互作用仿真的验证 |
China National Standards IMU |
English PDF |
| GB/T 32497-2016 |
Test method of ballistic resistance against fragment sIMUlating projectiles for fiber-reinforced composites—V50 method 纤维增强复合材料抗破片模拟弹性能试验方法 V50法 |
China National Standards IMU |
English PDF |
| GB/T 32526-2016 |
General specification for the equipment of passing azIMUth angle vertically 方位垂直传递装置通用规范 |
China National Standards IMU |
English PDF |
| GB/T 17948.5-2016 |
Rotating electrical machines—Functional evaluation of insulation systems—Test procedures for form-wound windings—Multifactor evaluation by endurance under sIMUltaneous thermal and electrical stresses 旋转电机 绝缘结构功能性评定 成型绕组试验规程 热、电综合应力耐久性多因子评定 |
China National Standards IMU |
English PDF |
| GB 2763-2016 |
National food safety standard—MaxIMUm residue limits for pesticides in food 食品安全国家标准 食品中农药最大残留限量 |
China National Standards IMU |
English PDF |
| GB/T 32330-2015 |
Light conveyor belts—Determination of the maxIMUm tensile strength 轻型输送带 最大拉伸强度的测定 |
China National Standards IMU |
English PDF |
| GB/T 32297-2015 |
SIMUlation requirements for space control system 航天控制系统仿真要求 |
China National Standards IMU |
English PDF |
| GB 9706.16-2015 |
Medical electrical equipment—Part 2: Particular requirements for the safety of radiotherapy sIMUlators 医用电气设备 第2部分：放射治疗模拟机安全专用要求 |
China National Standards IMU |
English PDF |
| GB/T 32221-2015 |
Vacuum technology—Vacuum thermal environmental sIMUlation test equipment of spacecraft—General specification 真空技术 航天器用真空热环境模拟试验设备 通用技术条件 |
China National Standards IMU |
English PDF |
| GB 32311-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for hydrogen producing systems by water electrolysis 水电解制氢系统能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 32284-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for petrochemical centrifugal pumps 石油化工离心泵能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 26920.2-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances—Part 2: Commercial refrigerated cabinets with self-contained condensing unit 商用制冷器具能效限定值和能效等级 第2部分：自携冷凝机组商用冷柜 |
China National Standards IMU |
English PDF |
| GB 20054-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for metal-halide lamps 金属卤化物灯能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 20053-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for ballasts of metal-halide lamps 金属卤化物灯用镇流器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 19577-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for water chillers 冷水机组能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 32188-2015 |
The method for full width at half maxIMUm of double crystal X-ray rocking curve of GaN single crystal substrate 氮化镓单晶衬底片x射线双晶摇摆曲线半高宽测试方法 |
China National Standards IMU |
English PDF |
| GB/T 32095.4-2015 |
Test specification on sIMUlative test and evaluation methods with food for non-stick surface of domestic metal utensils for household food 家用食品金属烹饪器具不粘表面性能及测试规范 第4部分：食物模拟测试规范及评价方法 |
China National Standards IMU |
English PDF |
| GB 32049-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for household and similar purposes A.C. electric ventilating fans 家用和类似用途交流换气扇能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 32031-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for waste submersible motor-pumps 污水污物潜水电泵能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 32030-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for submersible pumps for deep well 井用潜水电泵能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 32029-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for small-size submersible motor-pumps 小型潜水电泵能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 32028-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for projectors 投影机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 21520-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for computer monitors 计算机显示器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 12021.2-2015 |
The maxIMUm allowable values of the energy consumption and energy efficiency grade for household refrigerators 家用电冰箱耗电量限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 17430-2015 |
Estimating the maxIMUm service temperature of thermal insulation 绝热材料最高使用温度的评估方法 |
China National Standards IMU |
English PDF |
| GB/T 31858-2015 |
SIMUltaneous determination of acid yellow 1 and acid orange 7 prohibited using in eye cosmetics—High performance liquid chromatography 眼部护肤化妆品中禁用水溶性着色剂酸性黄 1和酸性橙 7的测定 高效液相色谱法 |
China National Standards IMU |
English PDF |
| GB 20665-2015 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for domestic gas instantaneous water heater and gas fired heating and hot water combi-boilers 家用燃气快速热水器和燃气采暖热水炉能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 325.5-2015 |
Packing containers—Steel drums—Part 5：Non-removable head（tight head）drums with a maxIMUm total capacity of 200L 包装容器 钢桶 第5部分：200L及以下闭口钢桶 |
China National Standards IMU |
English PDF |
| GB/T 325.4-2015 |
Packing containers—Steel drums—Part 4：Removable head(open head)drums with a maxIMUm total capacity of 200L 包装容器 钢桶 第4部分：200L及以下全开口钢桶 |
China National Standards IMU |
English PDF |
| GB/T 31569-2015 |
6-axis sIMUltaneous CNC spiral bevel gear milling machines—Testing of the accuracy 六轴联动数控螺旋锥齿轮铣齿机 精度检验 |
China National Standards IMU |
English PDF |
| GB/T 31558-2015 |
5-axis sIMUltaneous CNC spiral bevel gear grinding machines—Testing of the accuracy 五轴联动数控螺旋 锥齿轮磨齿机 精度检验 |
China National Standards IMU |
English PDF |
| GB/T 19133-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Test methond of maxIMUm stable side-inclination 三轮汽车和低速货车 最大侧倾稳定角试验方法 |
China National Standards IMU |
English PDF |
| GB/T 6324.6-2014 |
Test method of organic chemical products—Part 6: Determination of color for liquids—TristIMUlus colorimetry 有机化工产品试验方法 第6部分：液体色度的测定 三刺激值比色法 |
China National Standards IMU |
English PDF |
| GB 31276-2014 |
MinIMUm allowable values of energy efficiency and evaluating values of energy conservation of tungsten halogen lamp 普通照明用卤钨灯能效限定值及节能评价值 |
China National Standards IMU |
English PDF |
| GB/T 31210.2-2014 |
Green manufacturing—Near dry cutting—Part 2: Technical requirements for minIMUm quantity lubricating system 绿色制造 亚干式切削 第2部分：微量润滑系统技术要求 |
China National Standards IMU |
English PDF |
| GB 30978-2014 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for water dispensers 饮水机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 30846-2014 |
High-voltage alternating current circuit-breakers with intentionally non-sIMUltaneous pole operation 具有预定极间不同期操作高压交流断路器 |
China National Standards IMU |
English PDF |
| GB 30721-2014 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for water-source（ground-source）heat pumps 水(地)源热泵机组能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 30720-2014 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for domestic gas cooking appliances 家用燃气灶具能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 30717-2014 |
MinIMUm allowable values of water efficiency and water efficiency grades for squatting pans 蹲便器用水效率限定值及用水效率等级 |
China National Standards IMU |
English PDF |
| GB 30531-2014 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for commercial gas cooking appliances 商用燃气灶具能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 21521-2014 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for copy machines, printers and fax machines 复印机、打印机和传真机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 21456-2014 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for household induction cookers 家用电磁灶能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 2763-2014 |
National food safety safety standard-MaxIMUm residue limits for pesticides in food 食品安全国家标准 食品中农药最大残留限量（2014-8-1实施） |
China National Standards IMU |
English PDF |
| GB 30255-2013 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of non-directional self-ballasted LED-lamps for general lighting services 普通照明用非定向自镇流LED灯能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 30254-2013 |
MinIMUm allowable values of energy efficiency and the energy efficiency grades for cage three-phase high voltage induction motor 高压三相笼型异步电动机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 30253-2013 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for permanent magnet synchronous motors 永磁同步电动机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 19415-2013 |
MinIMUm allowable values of energy efficiency and evaluating values of energy conservation for single-capped fluorescent lamps 单端荧光灯能效限定值及节能评价值 |
China National Standards IMU |
English PDF |
| GB/T 783-2013 |
Lifting appliances - Range of maxIMUm capacities for basic models 起重机械 基本型的最大起重量系列 |
China National Standards IMU |
English PDF |
| GB/T 4389-2013 |
Double-headed open-ended wrenches,double-headed box wrenches and combination wrenches - MaxIMUm widths of heads 双头呆扳手、双头梅花扳手、两用扳手 头部外形的最大尺寸 |
China National Standards IMU |
English PDF |
| GB/T 2423.24-2013 |
Environmental testing - Part 2: Test methods - Test Sa: SIMUlated solar radiation at ground level and guidance for solar radiation testing 环境试验 第2部分：试验方法 试验Sa：模拟地面上的太阳辐射及其试验导则 |
China National Standards IMU |
English PDF |
| GB/T 3923.2-2013 |
Textiles - Tensile properties of fabrics - Part 2 :Determination of maxIMUm force using the grab method 纺织品 织物拉伸性能 第2部分：断裂强力的测定（抓样法） |
China National Standards IMU |
English PDF |
| GB/T 3923.1-2013 |
Textiles - Tensile properties of fabrics - Part 1: Determination of maxIMUm force and elongation at maximum force using the strip method 纺织品 织物拉伸性能 第1部分：断裂强力和断裂伸长率的测定（条样法） |
China National Standards IMU |
English PDF |
| GB 20943-2013 |
MinIMUm allowable values of energy efficiency and evaluating values of energy conservation for single voltage external AC-DC and AC-AC power supplies 单路输出式交流－直流和交流－交流外部电源能效限定值及节能评价值 |
China National Standards IMU |
English PDF |
| GB/T 9575-2013 |
Rubber and plastics hoses - Hose sizes, minIMUm and maximum inside diameters, and tolerances on cut-to-length hoses 橡胶和塑料软管 软管规格和最大最小内径及切割长度公差 |
China National Standards IMU |
English PDF |
| GB 29541-2013 |
The minIMUm allowable values of the energy efficiency and energy efficiency grades for heat pump water heaters 热泵热水机（器）能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| Find out:391Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
