Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 26600-2024 |
Microscopes - Immersion liquids for optical microscopy {译} 显微镜-光学显微术用浸液 |
China National Standards Immersion |
English PDF |
GB/T 42912-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static Immersion in molten salts or other liquids {译} 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 |
China National Standards Immersion |
English PDF |
GB/T 12085.8-2022 |
Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, Immersion {译} 光学和光子学 环境试验方法 第8部分:高内压、低内压、浸没 |
China National Standards Immersion |
English PDF |
GB/T 3836.29-2021 |
Explosive atmospheres—Part 29:Non-electrical equipment for explosive atmospheres—Constructional safety “c”,control of ignition source “b”, liquid Immersion “k” 爆炸性环境 第29部分:爆炸性环境用非电气设备 结构安全型“c”、控制点燃源型“b”、液浸型“k” |
China National Standards Immersion |
English PDF |
GB/T 24328.6-2020 |
Tissue paper and tissue products—Part 6: Determination of water-absorption time and water-absorption capacity—Basket-Immersion test method 卫生纸及其制品 第6部分: 吸水时间和吸水能力的测定 篮筐浸没法 |
China National Standards Immersion |
English PDF |
GB/T 32065.19-2020 |
Environmental test methods for oceanographic instruments—Part 19 : Immersion test 海洋仪器环境试验方法 第19部分:浸渍试验 |
China National Standards Immersion |
English PDF |
GB/T 19746-2018 |
Corrosion of metals and alloys—Alternate Immersion test in salt solution 金属和合金的腐蚀 盐溶液周浸试验 |
China National Standards Immersion |
English PDF |
GB/T 13477.11-2017 |
Test method for building sealants—Part 11:Determination of tensile properties at maintained extension after Immersion in wates 建筑密封材料试验方法 第11部分:浸水后定伸粘结性的测定 |
China National Standards Immersion |
English PDF |
GB/T 13477.9-2017 |
Test method for building sealants—Part 9:Determination of adhesion/cohesion properties after Immersion in water 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定 |
China National Standards Immersion |
English PDF |
GB/T 8753.1-2017 |
Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1:Measurement of the loss of mass after Immersion in acid solution(s) 铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第1部分:酸浸蚀失重法 |
China National Standards Immersion |
English PDF |
GB/T 3836.6-2017 |
Explosive atmospheres—Part 6:Equipment protection by liquid Immersion“o” 爆炸性环境 第6部分:由液浸型“o”保护的设备 |
China National Standards Immersion |
English PDF |
GB/T 30648.2-2015 |
Paints and varnishes—Determination of resistance to liquids—Part 2: Water Immersion method 色漆和清漆 耐液体性的测定 第2部分:浸水法 |
China National Standards Immersion |
English PDF |
GB/T 30648.1-2014 |
Paints and varnishes―Determination of resistance to liquids―Part 1: Immersion in liquids other than water 色漆和清漆 耐液体性的测定 第1部分:浸入除水之外的液体中 |
China National Standards Immersion |
English PDF |
GB/T 30807-2014 |
Thermal insulating products for building applications―Determination of long-term water absorption by Immersion 建筑用绝热制品 浸泡法测定长期吸水性 |
China National Standards Immersion |
English PDF |
GB/T 30805-2014 |
Thermal insulating products for building applications—Determination of short term water absorption by partial Immersion 建筑用绝热制品 部分浸入法测定短期吸水量 |
China National Standards Immersion |
English PDF |
GB/T 5161-2014 |
Metallic powders―Determination of effective density―Liquid Immersion method 金属粉末 有效密度的测定 液体浸透法 |
China National Standards Immersion |
English PDF |
GB/T 2423.30-2013 |
Environmental testing―Part 2: Test methods―Test XA and guidance: Immersion in cleaning solvents 环境试验 第2部分:试验方法 试验XA和导则:在清洗剂中浸渍 |
China National Standards Immersion |
English PDF |
GB/T 26600-2011 |
Microscopes - Immersion liquids for light microscopy 显微镜 光学显微术用浸液 |
China National Standards Immersion |
English PDF |
GB/T 12085.8-2010 |
Optics and optical instruments - Environmental test methods - Part 8: High pressure,low pressure,Immersion 光学和光学仪器 环境试验方法 第8部分:高压、低压、浸没 |
China National Standards Immersion |
English PDF |
GB 25286.8-2010 |
Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liquid Immersion “k” 爆炸性环境用非电气设备 第8部分:液浸型“k” |
China National Standards Immersion |
English PDF |
GB/T 24328.6-2009 |
Tissue paper and tissue products - Part 6: Water-absorption time and water-absorption capacity (basket-Immersion test method) 卫生纸及其制品 第6部分:吸水时间和吸水能力(篮筐浸没法) |
China National Standards Immersion |
English PDF |
GB 4706.77-2008 |
Household and similar electrical appliances-safety - Particular requirements for portable Immersion heaters 家用和类似用途电器的安全 便携浸入式加热器的特殊要求 |
China National Standards Immersion |
English PDF |
GB/T 22873-2008 |
Corrugated fibreboard - Determination of the water resistance of the glue bond(Immersion) 瓦楞纸板 胶粘抗水性的测定(浸水法) |
China National Standards Immersion |
English PDF |
GB/T 11983-2008 |
Surface active agents - Determination of wetting power by Immersion 表面活性剂 润湿力的测定 浸没法 |
China National Standards Immersion |
English PDF |
GB 4706.75-2008 |
Household and similar electrical appliances - Safety - Particular requirements for fixed Immersion heaters 家用和类似用途电器的安全 固定浸入式加热器的特殊要求 |
China National Standards Immersion |
English PDF |
GB/T 465.2-2008 |
Paper and board - Determination of tensile strength after Immersion in water 纸和纸板 浸水后抗张强度的测定 |
China National Standards Immersion |
English PDF |
GB/T 465.1-2008 |
Paper and board - Determination of bursting strength after Immersion in water 纸和纸板 浸水后耐破度的测定 |
China National Standards Immersion |
English PDF |
GB/T 11547-2008 |
Plastic - Methods of test for the determination of the effects of Immersion in liquid chemicals 塑料 耐液体化学试剂性能的测定 |
China National Standards Immersion |
English PDF |
GB/T 1033.1-2008 |
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 |
China National Standards Immersion |
English PDF |
GB/T 2951.21-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 21:Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil Immersion tests 电缆和光缆绝缘和护套材料通用试验方法 第21部分:弹性体混合料专用试验方法 耐臭氧试验-热延伸试验-浸矿物油试验 |
China National Standards Immersion |
English PDF |
GB/T 10834-2008 |
Ship coatings - Determination of resistance to salt water - Salt water and hot salt water Immersion method 船舶漆耐盐水性的测定 盐水和热盐水浸泡法 |
China National Standards Immersion |
English PDF |
GB/T 15972.53-2008 |
Specifications for optical fibre test methods - Part 53: Measurement methods and test procedures for environmental characteristics - Water Immersion 光纤试验方法规范 第53部分:环境性能的测量方法和试验程序 浸水 |
China National Standards Immersion |
English PDF |
GB/T 20898.3-2007 |
Immersion suits - Part 3: Test methods 浸水服 第3部分:试验方法 |
China National Standards Immersion |
English PDF |
GB/T 20898.2-2007 |
Immersion suits - Part 2: Abandonment suits,requirements including safety 浸水服 第2部分:弃船服安全要求 |
China National Standards Immersion |
English PDF |
GB/T 20898.1-2007 |
Immersion suits - Part 1: Constant wear suits,requirements including safety 浸水服 第1部分:常穿服安全要求 |
China National Standards Immersion |
English PDF |
GB/T 461.3-2005 |
Paper and board-Determination of water absorption(Immersion in water) 纸和纸板 吸水性的测定(浸水法) |
China National Standards Immersion |
English PDF |
GB/T 19746-2005 |
Corrosion of metals and alloys-Alternate Immersion test in salt solution 金属和合金的腐蚀 盐溶液周浸试验 |
China National Standards Immersion |
English PDF |
GB 3836.6-2004 |
Electrical apparatus for explosive gas atmospheres--Part 6:Oil-Immersion“o” 爆炸性气体环境用电气设备 第6部分:油浸型“o” |
China National Standards Immersion |
English PDF |
GB/T 18310.45-2003 |
Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-45:Tests--Durability test by water Immersion 纤维光学互连器件和无源器件 基本试验和测量程序 第2-45部分:试验 浸水耐久性 |
China National Standards Immersion |
English PDF |
GB/T 13477.9-2002 |
Test method for building sealants--Part 9:Determination of adhesion/cohesion properties after Immersion in water 建筑密封材料试验方法 第9部分:浸水后拉伸粘结性的测定 |
China National Standards Immersion |
English PDF |
GB/T 13477.11-2002 |
Test method for building sealants--Part 11:Determination of adhesion/cohesion properties at maintained extension after Immersion in water 建筑密封材料试验方法 第11部分:浸水后定伸粘结性的测定 |
China National Standards Immersion |
English PDF |
GB/T 8631-2001 |
Textiles--Determination of dimensional changes of fabrics induced by cold-water Immersion 纺织品 织物因冷水浸渍而引起的尺寸变化的测定 |
China National Standards Immersion |
English PDF |
GB 9953-1999 |
Immersion suits 浸水保温服 |
China National Standards Immersion |
English PDF |
GB/T 4857.12-1992 |
Packaging--Transport packages--Water Immersion test method 包装 运输包装件 浸水试验方法 |
China National Standards Immersion |
English PDF |
GB/T 11927-1989 |
Uranium dioxide pellets--Determination of density and amount of open porosity--Penetration Immersion method 二氧化铀芯块密度和开口孔隙度的测定 液体浸渍法 |
China National Standards Immersion |
English PDF |
GB/T 5209-1985 |
Paints and varnishes--Determination of resistance to water--Water Immersion method 色漆和清漆耐水性的测定 浸水法 |
China National Standards Immersion |
English PDF |
Find out:46Items | To Page of: First -Previous-Next -Last | 1 |