Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 2820.9-2024 |
Alternating current generator sets driven by reciprocating Internal combustion engines - Part 9: Measurement and evaluation of mechanical vibrations {译} 往复式内燃机驱动的交流发电机组-第9部分：机械振动的测量和评价 |
China National Standards Internal combustion engines |
 English PDF |
| GB/T 20064.1-2023 |
Reciprocating Internal combustion engines - Handle starters - Part 1: Safety requirements and tests {译} 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.17-2023 |
Internal combustion engines - Piston rings - Part 17: Steel spiral spring oil rings {译} 内燃机 活塞环 第17部分：钢质螺旋撑簧油环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.12-2023 |
Internal combustion engines - Piston rings - Part 12: Wedge steel rings {译} 内燃机 活塞环 第12部分：楔形钢环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.11-2023 |
Internal combustion engines - Piston rings - Part 11: Wedge cast iron rings {译} 内燃机 活塞环 第11部分：楔形铸铁环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 15548-2023 |
General technical conditions for three-phase synchronous generators driven by reciprocating Internal combustion engines {译} 往复式内燃机驱动的三相同步发电机通用技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20787-2023 |
Reciprocating Internal combustion engines—Measurement methods for structure-borne noise {译} 往复式内燃机 结构噪声测量方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 14097-2023 |
Reciprocating Internal combustion engines Noise limits {译} 往复式内燃机 噪声限值 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.4-2023 |
Reciprocating Internal combustion engines - Emissions measurement - Part 4: Steady-state and transient test cycles for engines of different uses {译} 往复式内燃机 排放测量 第4部分：不同用途发动机的稳态和瞬态试验循环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.1-2023 |
Reciprocating Internal combustion engines - Emission measurements - Part 1: Test bench measurement systems for gaseous and particulate emissions {译} 往复式内燃机 排放测量 第1部分：气体和颗粒排放物的试验台测量系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 41517-2022 |
Ships and offshore technology - Ventilation of cargo spaces of vehicles capable of traveling with Internal combustion engines - Theoretical calculation of the total airflow demand {译} 船舶和海上技术 可行驶内燃机车辆的货舱的通风 气流总需量的理论计算 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 24141.2-2022 |
Rubber hoses and tubing for fuel circuits for Internal combustion engines—Specification—Part 2: Gasoline fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 41161-2022 |
Reciprocating Internal combustion engines—Measurement method for combustion noise 往复式内燃机 燃烧噪声测量方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 2820.8-2022 |
Alternating generator sets driven by reciprocating Internal combustion engines - Part 8: Requirements and tests for low power generator sets {译} 往复式内燃机驱动的交流发电机组 第8部分：对小功率发电机组的要求和试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 2820.1-2022 |
Alternating generator sets driven by reciprocating Internal combustion engines - Part 1: Purpose, rating and performance {译} 往复式内燃机驱动的交流发电机组 第1部分：用途、定额和性能 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.8-2022 |
Internal combustion engines - Piston rings - Part 8: Rectangular steel rings {译} 内燃机 活塞环 第8部分：矩形钢环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 25361.1-2022 |
Internal combustion engines - Piston pins - Part 1: Technical requirements {译} 内燃机 活塞销 第1部分：技术要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 21404-2022 |
Internal combustion engines - Methods of determining and measuring engine power - General requirements {译} 内燃机 发动机功率的确定和测量方法 一般要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.6-2022 |
Reciprocating Internal combustion engines - Emission measurements - Part 6: Measurement results and test reports {译} 往复式内燃机 排放测量 第6部分：测量结果和试验报告 |
China National Standards Internal combustion engines |
English PDF |
| GB 14023-2022 |
Vehicles, boats and Internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for protection of off-vehicle receivers {译} 车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 12773-2021 |
Valve steel and superalloy bars for Internal combustion engines 内燃机气阀用钢及合金棒材 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.12-2021 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分：颗粒计数法滤清效率和容灰量 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.12-2021 |
Reciprocating Internal combustion engines—Vocabulary of components and systems—Part 12:Exhaust emission control systems 往复式内燃机 零部件和系统术语 第12部分：排放控制系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.6-2021 |
Internal combustion engines—Piston rings—Part 6: Scraper rings made of cast iron 内燃机 活塞环 第6部分：铸铁刮环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.4-2021 |
Internal combustion engines—Piston rings—Part 4:Quality requirements 内燃机 活塞环 第4部分：质量要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20969.4-2021 |
Special environmental condition—Machinery for plateau—Part 4:Guide rule of test for plateau natural environment—Internal combustion engines 特殊环境条件 高原机械 第4部分：高原自然环境试验导则 内燃动力机械 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20969.1-2021 |
Special environmental condition—Machinery for plateau—Part 1: Requirements for Internal combustion engines on plateau 特殊环境条件 高原机械 第1部分：高原对内燃动力机械的要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 38750.2-2020 |
Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 2:Gasoline engines 往复式内燃机能效评定规范 第2部分：汽油机 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 38750.1-2020 |
Reciprocating internal combustion engine energy efficiency evaluating specifications—Part 1:Diesel engines 往复式内燃机能效评定规范 第1部分：柴油机 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.14-2020 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法 第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 38340-2019 |
Small craft—Reciprocating Internal combustion engines exhaust emission measurement—Test-bed measurement of gaseous and particulate exhaust emissions 小艇 往复式内燃机排放测量 气体和颗粒排放物的试验台测量 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.11-2018 |
Reciprocating Internal combustion engines—Vocabulary of components and systems—Part 11: Fuel systems 往复式内燃机-零部件和系统术语-第11部分：燃油系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20651.1-2018 |
Reciprocating Internal combustion engines—Safety—Part 1: Compression ignition engines 往复式内燃机-安全-第1部分：压燃式发动机 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.10-2018 |
Reciprocating Internal combustion engines—Vocabulary of components and systems—Part 10: Ignition systems 往复式内燃机-零部件和系统术语-第10部分：点火系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.8-2018 |
Reciprocating Internal combustion engines—Exhaust emission measurement—Part 8：Engine group determination 往复式内燃机-排放测量-第8部分：发动机系组的确定 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1147.1-2017/XG1-2018 |
Small and medium power Internal combustion engines - Part 1：General requirements 《中小功率内燃机-第1部分：通用技术条件》国家标准第1号修改单 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 18655-2018 |
Vehicles, boats and Internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 14097-2018 |
Reciprocating Internal combustion engines—Limit values of emitted noise 往复式内燃机 噪声限值 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 23340-2018 |
Internal combustion engines—Connecting-rods—Specification 内燃机 连杆 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.5-2018 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability 内燃机全流式机油滤清器试验方法 第5部分：冷起动模拟和液压脉冲耐久试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 23338-2018 |
Internal combustion engines—Charge air coolers—Specification 内燃机 增压空气冷却器 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 23339-2018 |
Internal combustion engines—Crankshafts—Specification 内燃机 曲轴 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.15-2018 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分：复合材料滤清器的振动疲劳试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.7-2018 |
Reciprocating Internal combustion engines—Exhaust emission measurement—Part 7：Engine family determination 往复式内燃机 排放测量 第7部分：发动机系族的确定 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 18948-2017 |
Rubber hoses and tubing for cooling systems for internal-combustion engines—Specification 内燃机冷却系统用橡胶软管和纯胶管 规范 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 33928-2017 |
Reciprocating Internal combustion engines—Measurement method for exhaust silencers—Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio 往复式内燃机 排气消声器测量方法 声压法排气噪声声功率级和插入损失及功率损失比 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.15-2017 |
Internal combustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron 内燃机 活塞环 第15部分：薄型铸铁螺旋撑簧油环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.9-2017 |
Reciprocating Internal combustion engines—Exhaust emission measurement—Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8188-2017 |
Reciprocating Internal combustion engines—Emissions terminology and nomenclature 往复式内燃机 排放术语和定义 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.7-2017 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 7：Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分：振动疲劳试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.6-2017 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1859.4-2017 |
Reciprocating Internal combustion engines—Measurement of sound power levels using sound pressure—Part 4:Survey method using a reference sound source 往复式内燃机 声压法声功率级的测定 第4部分：使用标准声源简易法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1147.1-2017 |
Small and medium power Internal combustion engines—Part 1: General requirements 中小功率内燃机 第1部分：通用技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1147.2-2017 |
Small and medium power Internal combustion engines—Part 2: Test methods 中小功率内燃机 第2部分：试验方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 33349-2016 |
General specification for gas electric power plant system with reciprocating Internal combustion engines 往复式内燃燃气电站系统通用技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.5-2016 |
Reciprocating Internal combustion engines—Vocabulary of components and systems—Part 5: Cooling systems 往复式内燃机 零部件和系统术语 第5部分：冷却系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.13-2015 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分：复合材料滤清器的静压耐破度试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 3821-2015 |
Small and medium power Internal combustion engines—Cleanliness limits and measurements 中小功率内燃机 清洁度限值和测定方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20064.1-2015 |
Reciprocating Internal combustion engines—Handle starting equipment—Part 1: Safety requirements and tests 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1859.3-2015 |
Reciprocating Internal combustion engines—Measurement of sound power level using sound pressure—Part 3: Precision methods for hemi-anechoic rooms 往复式内燃机 声压法声功率级的测定 第3部分：半消声室精密法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1859.2-2015 |
Reciprocating Internal combustion engines—Measurement of sound power level using sound pressure—Part 2: Survey method 往复式内燃机 声压法声功率级的测定 第2部分：简易法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1859.1-2015 |
Reciprocating Internal combustion engines—Measurement of sound power level using sound pressure—Part 1: Engineering method 往复式内燃机 声压法声功率级的测定 第1部分：工程法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.16-2015 |
Internal combustion engines—Piston rings—Part 16: Expander/segment oil-control rings 内燃机 活塞环 第16部分：钢带组合油环 |
China National Standards Internal combustion engines |
English PDF |
| GB 20651.2-2014 |
Reciprocating Internal combustion engines―safety―Part 2: Spark ignition engines 往复式内燃机 安全 第2部分：点燃式发动机 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.9-2013 |
Reciprocating Internal combustion engines―Vocabulary of components and systems―Part 9: Control and monitoring systems 往复式内燃机 零部件和系统术语 第9部分：监控系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.3-2013 |
Reciprocating Internal combustion engines―Vocabulary of components and systems―Part 3: Main running gear 往复式内燃机 零部件和系统术语 第3部分：主要运动件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.2-2013 |
Reciprocating Internal combustion engines—Vocabulary of components and systems—Part 2: Valves,camshaft drives and actuating mechanisms 往复式内燃机 零部件和系统术语 第2部分：气门、凸轮轴传动和驱动机构 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 30462-2013 |
Remanufactured non-road Internal combustion engines―General specifications 再制造非道路用内燃机 通用技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.12-2013 |
Internal combustion engines―Piston rings―Part 12: Half keystone rings made of steel 内燃机 活塞环 第12部分：楔形钢环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.10-2013 |
Internal combustion engines-Piston rings―Part 10: Keystone rings made of steel 内燃机 活塞环 第10部分：梯形钢环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 30138-2013 |
Design code for exhaust and cooling water heat recovery system of gas electric power plant with reciprocating Internal combustion engines 往复式内燃燃气电站余热利用系统设计规范 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 28950.2-2012 |
Road vehicles and Internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components 道路车辆和内燃机 滤清器名词术语 第2部分：滤清器及其部件性能指标定义 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 28950.1-2012 |
Road vehicles and Internal combustion engines - Filter vocabulary - Part 1: Definitions of filters and filter components 道路车辆和内燃机 滤清器名词术语 第1部分：滤清器和滤清器部件定义 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 28949-2012 |
Inlet air cleaning equipment for Internal combustion engines and compressors - Performance testing 内燃机和空气压缩机用进气空气滤清器 性能试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1151-2012 |
Internal combustion engines - Main and connecting rod bearings - Specifications 内燃机 主轴瓦及连杆轴瓦 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6072.4-2012 |
Reciprocating Internal combustion engines - Performance - Part 4: Speed governing 往复式内燃机 性能 第4部分：调速 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.9-2012 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests 内燃机全流式机油滤清器试验方法 第9部分：进、出口止回阀试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.5-2011 |
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 5: Test fuels 往复式内燃机 排放测量 第5部分：试验燃料 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.2-2011 |
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site 往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 18655-2010 |
Vehicles, boats and Internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.9-2010 |
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分：压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.4-2010 |
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications 往复式内燃机 排放测量 第4部分：不同用途发动机的稳态试验循环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.1-2010 |
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions 往复式内燃机 排放测量 第1部分：气体和颗粒排放物的试验台测量 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.10-2010 |
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第10部分：压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.8-2010 |
Reciprocating Internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems 往复式内燃机 零部件和系统术语 第8部分：起动系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.5-2010 |
Reciprocating Internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems 往复式内燃机 零部件和系统术语 第5部分：冷却系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 25361.2-2010 |
Internal combustion engines - Piston pins - Part 2: Inspection measuring principles 内燃机 活塞销 第2部分：检验规则 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 25361.1-2010 |
Internal combustion engines - Piston pins - Part 1: General specifications 内燃机 活塞销 第1部分：技术要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1150-2010 |
Internal combustion engines - Cast iron wet cylinder liners - Specifications 内燃机 湿式铸铁气缸套 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.7-2010 |
Internal combustion engines - Piston rings - Part 7: Rectangular rings made of cast iron 内燃机 活塞环 第7部分：矩形铸铁环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.3-2010 |
Internal combustion engines - Piston rings - Part 3: Material specifications 内燃机 活塞环 第3部分：材料规范 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.2-2010 |
Internal combustion engines - Piston rings - Part 2: Vocabulary 内燃机 活塞环 第2部分：术语 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.11-2010 |
Internal combustion engines - Piston rings - Part 11: Half keystone rings made of cast iron 内燃机 活塞环 第11部分：楔形铸铁环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1148-2010 |
Internal combustion engines - Aluminium pistons - Specifications 内燃机 铝活塞 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 24748-2009 |
Reciprocating Internal combustion engines - Flywheels - General specifications 往复式内燃机 飞轮 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 24141.2-2009 |
Rubber hoses and tubing for fuel circuits for Internal combustion engines - Specification - Part 2: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 24141.1-2009 |
Rubber hoses and tubing for fuel circuits for Internal combustion engines - Specification - Part 1: Diesel fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第1部分：柴油燃料 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 24140-2009 |
Rubber hose and tubing for air and vacuum systems for internal-combustion engines - Specification 内燃机空气和真空系统用橡胶软管和纯胶管 规范 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 18948-2009 |
Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification 内燃机冷却系统用橡胶软管和纯胶管 规范 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 2820.2-2009 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 2: Engines 往复式内燃机驱动的交流发电机组 第2部分：发动机 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.11-2009 |
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions 往复式内燃机 排放测量 第11部分：非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.7-2009 |
Reciprocating Internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems 往复式内燃机 零部件和系统术语 第7部分：调节系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.6-2009 |
Reciprocating Internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems 往复式内燃机 零部件和系统术语 第6部分：润滑系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.1-2009 |
Reciprocating Internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers 往复式内燃机 零部件和系统术语 第1部分：固定件及外部罩盖 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 4759-2009 |
Exhaust silencers for Internal combustion engines - Measurement procedure 内燃机排气消声器 测量方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 23342-2009 |
Reciprocal Internal combustion engines - Recoil starting equipment - General safety requirements 往复式内燃机 回弹式绳索起动装置 基本安全要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 23340-2009 |
Internal combustion engines - Connecting-rods - Specification 内燃机 连杆 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 23339-2009 |
Internal combustion engines - Crankshafts - Specification 内燃机 曲轴 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 23338-2009 |
Internal combustion engines - Charge air coolers - Specification 内燃机 增压空气冷却器 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 23337-2009 |
Internal combustion engines - Intake and exhaust valves - Specification 内燃机 进、排气门 技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 17804-2009 |
Reciprocating Internal combustion engines - Graphical symbols 往复式内燃机 图形符号 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 11700-2009 |
Small craft - Marine propulsion reciprocating Internal combustion engines - Power measurements and declarations 小艇 船用推进往复式内燃机 功率的测定和标定 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6072.3-2008 |
Reciprocating Internal combustion engines - Performance - Part 3: Test measurements 往复式内燃机 性能 第3部分：试验测量 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.9-2008 |
Internal combustion engines - Piston rings - Part 9: Keystone rings made of cast iron 内燃机 活塞环 第9部分：梯形铸铁环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.8-2008 |
Internal combustion engines - Piston rings - Part 8: Rectangular rings made of steel 内燃机 活塞环 第8部分：矩形钢环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.6-2008 |
Internal combustion engines - Piston rings - Part 6: Scraper rings made of cast iron 内燃机 活塞环 第6部分：铸铁刮环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.5-2008 |
Internal combustion engines - Piston rings - Part 5: Inspection measuring principles 内燃机 活塞环 第5部分：检验方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.4-2008 |
Internal combustion engines - Piston rings - Part 4: Quality requirements 内燃机 活塞环 第4部分：质量要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.14-2008 |
Internal combustion engines - Piston rings - Part 14: Coil-spring-loaded oil control rings 内燃机 活塞环 第14部分：螺旋撑簧油环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.13-2008 |
Internal combustion engines - Piston rings - Part 13: Oil control rings 内燃机 活塞环 第13部分：油环 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1149.1-2008 |
Internal combustion engines - Piston rings - Part 1: General specifications 内燃机 活塞环 第1部分：通用规则 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 725-2008 |
Internal combustion engines - Nomenclature and code of designations 内燃机产品名称和型号编制规则 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 12773-2008 |
Valve steel and superalloy bars for Internal combustion engines 内燃机气阀用钢及合金棒材 |
China National Standards Internal combustion engines |
English PDF |
| GB 20800.3-2008 |
General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 3: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust 爆炸性环境用往复式内燃机防爆技术通则 第3部分：存在甲烷和（或）可燃性粉尘的地下矿区巷道用I类内燃机 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6072.1-2008 |
Reciprocating Internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use 往复式内燃机 性能 第1部分：功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 21406-2008 |
Internal combustion engines - Engine weight (mass) declaration 内燃机 发动机的重量（质量）标定 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20969.4-2008 |
Special environmental condition - Machinery for plateau - Part 4: Guide rule of test for plateau natural environment - Internal combustion engines 特殊环境条件 高原机械 第4部分：高原自然环境试验导则 内燃动力机械 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 21427-2008 |
Special environmental condition - Requirements and test methods for electric powerplant with Internal combustion engines in dry heat-desert 特殊环境条件 干热沙漠对内燃机电站系统的技术要求及试验方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 21426-2008 |
Special environmental condition - Requirements for electric power plant with Internal combustion engines on plateau 特殊环境条件 高原对内燃机电站的要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 21156.1-2007 |
Special environmental condition - Machinery for desert - Part 1: Internal combustion engines on dry heat-desert condition 特殊环境条件 沙漠机械 第1部分：干热沙漠内燃动力机械 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20969.1-2007 |
Special environmental condition - Machinery for plateau - Part 1: Requirements for Internal combustion engines on plateau 特殊环境条件 高原机械 第1部分：高原对内燃动力机械的要求 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.12-2007 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分：采用颗粒计数法测定滤清效率和容灰量 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.11-2007 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法 第11部分：自净式滤清器 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6809.4-2007 |
Reciprocating Internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems 往复式内燃机 零部件和系统术语 第4部分：增压及进排气管系统 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1147.2-2007 |
Small and medium power Internal combustion engines - Part 2: Test methods 中小功率内燃机 第2部分：试验方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1147.1-2007 |
Small and medium power Internal combustion engines - Part 1：General requirements 中小功率内燃机 第1部分：通用技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.7-2006 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 7: Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.6-2006 |
Reciprocating Internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test 往复式内燃机 排放测量 第6部分：测量结果和试验报告 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20787-2006 |
Reciprocating Internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet 往复式内燃机 中、高速往复式内燃机底脚结构噪声测试规范 |
China National Standards Internal combustion engines |
English PDF |
| GB 20800.2-2006 |
General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 2: Group Ⅱengines for use in flammable dust atmospheres 爆炸性环境用往复式内燃机防爆技术通则 第2部分：可燃性粉尘环境用Ⅱ类内燃机 |
China National Standards Internal combustion engines |
English PDF |
| GB 20800.1-2006 |
General rules of explosion-protect techniques of reciprocating Internal combustion engines for explosive atmospheres - Part 1: Group Ⅱengines for use in flammable gas and vapor atmospheres 爆炸性环境用往复式内燃机防爆技术通则 第1部分：可燃性气体和蒸汽环境用 Ⅱ类内燃机 |
China National Standards Internal combustion engines |
English PDF |
| GB 20651.1-2006 |
Reciprocating Internal combustion engines - Safety - Part 1: Compression ignition engines 往复式内燃机 安全 第1部分：压燃式发动机 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 12786-2006 |
Automatic electric power plant with Internal combustion engines for general specification 自动化内燃机电站通用技术条件 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.6-2006 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines - Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分：静压耐破度试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.5-2006 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test 内燃机全流式机油滤清器试验方法 第5部分：冷起动模拟和液压脉冲耐久试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20064.2-2006 |
Reciprocating Internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement 往复式内燃机 手柄起动装置 第2部分：脱开角试验方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20064.1-2006 |
Reciprocating Internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests 往复式内燃机 手柄起动装置 第1部分：安全要求和试验 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1883.2-2005 |
Reciprocating Internal combustion engines-Vocabulary-Part 2:Terms for engine maintenance 往复式内燃机 词汇 第2部分：发动机维修术语 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1883.1-2005 |
Reciprocating Internal combustion engines-Vocabulary-Part 1:Terms for engine design and operation 往复式内燃机 词汇 第1部分：发动机设计和运行术语 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 20024-2005 |
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 3821-2005 |
Small and medium power Internal combustion engines-Cleanliness measurement 中小功率内燃机清洁度测定方法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6072.5-2003 |
Reciprocating Internal combustion engines--Performance--Part 5: Torsional vibrations 往复式内燃机 性能 第5部分: 扭转振动 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 4672-2003 |
Reciprocating Internal combustion engines--Hand-operated control devices--Standard direction of motion 往复式内燃机 手操纵控制机构 标准动作方向 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.4-2003 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 4: Initial particle retention efficiency，life and cumulative efficiency(gravimetric method) 内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法) |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.3-2003 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.2-2003 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 2: Element by-pass valve characteristics 内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8243.1-2003 |
Methods of test for full-flow lubricating oil filters for Internal combustion engines--Part 1: Differential pressure/flow characteristics 内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.8-2003 |
Reciprocating Internal combustion engines--Exhaust emission measurement--Part 8: Engine group determination 往复式内燃机 排放测量 第8部分: 发动机系组的确定 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.7-2003 |
Reciprocating Internal combustion engines--Exhaust emission measurement--Part 7: Engine family determination 往复式内燃机 排放测量 第7部分: 发动机系族的确定 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 8190.3-2003 |
Reciprocating Internal combustion engines--Exhaust emission measurement--Part 3:Definitions and methods of measurement of exhaust gas smoke under steady-state conditions 往复式内燃机 排放测量 第3部分: 稳态工况排气烟度的定义和测量方法 |
China National Standards Internal combustion engines |
English PDF |
| GB 4556-2001 |
Reciprocating Internal combustion engines--Fire protection 往复式内燃机 防火 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 1859-2000 |
Reciprocating Internal combustion engines--Measurement of emitted airborne noise--Engineering method and survey method 往复式内燃机 辐射的空气噪声测量 工程法及简易法 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 6072.6-2000 |
Reciprocating internal combustionengines--Performance--Part 6:Overspeed protection 往复式内燃机 性能 第6部分:超速保护 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 726-1994 |
Reciprocating Internal combustion engines--Designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in line engines and locations on an engine 往复式内燃机 旋转方向、气缸和气缸盖上气门的标志及直列式内燃机右机、左机和发动机方位的定义 |
China National Standards Internal combustion engines |
English PDF |
| GB/T 14024-1992 |
Limits and methods of measurement of radio interference characteristics of electric power plant with Internal combustion engines--Conducted interference 内燃机电站无线电干扰特性的测量方法及允许值 传导干扰 |
China National Standards Internal combustion engines |
English PDF |
| Find out:165Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
