Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 20042.6-2024 |
Proton exchange membrane fuel ceLLS - Part 6 ：Test methods for bipolar plate characteristics {译} 质子交换膜燃料电池-第6部分：双极板特性测试方法 |
China National Standards LLS |
 English PDF |
| GB/T 43789.32-2024 |
Determination of silver content in silver paste for solar ceLLS - Thiocyanate standard solution titration method {译} 电子纸显示器件-第3-2部分：光电性能测试方法 |
China National Standards LLS |
English PDF |
| GB/T 43672-2024 |
Operation procedures for permanent sealing and disposal of abandoned weLLS in oil and gas field exploitation {译} 油气田开采废弃井永久性封井处置作业规程 |
China National Standards LLS |
English PDF |
| GB/T 43496-2023 |
Detection methods for thermal cycle and condensation of building curtain waLLS {译} 建筑幕墙热循环和结露检测方法 |
China National Standards LLS |
English PDF |
| GB/T 29043-2023 |
Methods for testing the thermal insulation performance of building curtain waLLS {译} 建筑幕墙保温性能检测方法 |
China National Standards LLS |
English PDF |
| GB 21252-2023 |
Energy consumption limit per unit product for building sanitary ceramics and wear-resistant alumina baLLS {译} 建筑卫生陶瓷和耐磨氧化铝球单位产品能源消耗限额 |
China National Standards LLS |
English PDF |
| GB/T 43361-2023 |
Gas Analysis Validation of Hydrogen Fuel Analysis Methods for Proton Exchange Membrane Fuel CeLLS for Road Vehicles {译} 气体分析 道路车辆用质子交换膜燃料电池氢燃料分析方法的确认 |
China National Standards LLS |
English PDF |
| GB/T 43403-2023 |
Road vehicles Trailers below 3.5t Quality inspection after fatigue test of welded traction brackets for connecting baLLS {译} 道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查 |
China National Standards LLS |
English PDF |
| GB/T 42466-2023 |
Technical specifications for the management of pluripotent stem ceLLS in biobanks {译} 生物样本库多能干细胞管理技术规范 |
China National Standards LLS |
English PDF |
| GB/T 42729-2023 |
Lithium-Ion CeLLS and Battery Packs Safety Guide {译} 锂离子电池和电池组安全使用指南 |
China National Standards LLS |
English PDF |
| GB/T 42633-2023 |
General specification for space solar ceLLS {译} 空间用太阳电池通用规范 |
China National Standards LLS |
English PDF |
| GB/T 42539-2023 |
Rolling bearings - Ceramic baLLS for bearings - Determination of strength (notched ball test) {译} 滚动轴承 轴承用陶瓷球 强度测定（缺口球试验） |
China National Standards LLS |
English PDF |
| GB/T 42614-2023 |
Sliding bearings - Determination of the limit value of σ0.01* for metal flangeless thin-walled bearing sheLLS {译} 滑动轴承 金属无法兰薄壁轴瓦 σ0.01*极限值的测定 |
China National Standards LLS |
English PDF |
| GB/T 3883.201-2017 |
Safety of Handheld, Portable Power Tools and Garden Tools Part 2: Particular Requirements for Electric DriLLS and Impact Drills "Amendment No. 1" {译} 手持式、可移式电动工具和园林工具的安全 第2部分：电钻和冲击电钻的专用要求《第1号修改单》 |
China National Standards LLS |
English PDF |
| GB/T 20042.2-2023 |
Proton Exchange Membrane Fuel CeLLS Part 2: General Specifications for Cell Stacks {译} 质子交换膜燃料电池 第2部分：电池堆通用技术条件 |
China National Standards LLS |
English PDF |
| GB/T 37047-2022 |
Earth-to-ground flash density based on the Lightning Location System (LLS) General {译} 基于雷电定位系统（LLS）的地闪密度 总则 |
China National Standards LLS |
English PDF |
| GB/T 4256-2022 |
Straight Shank and Morse Taper Shank Reaming DriLLS {译} 直柄和莫氏锥柄扩孔钻 |
China National Standards LLS |
English PDF |
| GB/Z 41506-2022 |
Hydraulic transmission - Fatigue pressure test for metal pressure sheLLS - Evaluation method {译} 液压传动 金属承压壳体的疲劳压力试验 评价方法 |
China National Standards LLS |
English PDF |
| GB/T 41605-2022 |
Silicon nitride materials for rolling bearing baLLS - Test method for indentation fracture resistance at room temperature - Indentation method {译} 滚动轴承球用氮化硅材料 室温压痕断裂阻力试验方法 压痕法 |
China National Standards LLS |
English PDF |
| GB/T 17445-2022 |
Cast grinding baLLS 铸造磨球 |
China National Standards LLS |
English PDF |
| GB/T 42120-2022 |
Frozen Lamb RoLLS {译} 冻卷羊肉 |
China National Standards LLS |
English PDF |
| GB 31241-2022 |
Lithium-ion ceLLS and batteries for portable electronic products Safety technical specifications {译} 便携式电子产品用锂离子电池和电池组 安全技术规范 |
China National Standards LLS |
English PDF |
| GB/T 41898-2022 |
Determination of corrosion resistance and compactness of coatings on inner waLLS of food metal containers-electrochemical method {译} 食品金属容器内壁涂覆层耐蚀力和致密性的测定 电化学法 |
China National Standards LLS |
English PDF |
| GB/T 41744-2022 |
Substrate glass for copper indium gallium selenide thin film solar ceLLS {译} 铜铟镓硒薄膜太阳能电池用基板玻璃 |
China National Standards LLS |
English PDF |
| GB/T 41895-2022 |
Determination of DNA virus in ceLLS MNP labeling method {译} 细胞中DNA病毒测定 MNP标记法 |
China National Standards LLS |
English PDF |
| GB 40165-2021 |
Lithium ion ceLLS and batteries used in stationary electronic equipments—Safety technical specification 固定式电子设备用锂离子电池和电池组 安全技术规范 |
China National Standards LLS |
English PDF |
| GB/T 40548-2021 |
Technical specification of separate layers pressure control and combined layers drainage for coalbed methane weLLS 煤层气井分层控压合层排采技术规范 |
China National Standards LLS |
English PDF |
| GB/T 38051.1-2021 |
Household electric cooking appliances—Part 1：Ranges, ovens, steam ovens and griLLS—Methods for measuring performance 家用烹饪电器 第1部分：电灶、烤箱、蒸箱和烤架 性能测试方法 |
China National Standards LLS |
English PDF |
| GB 40165-2021 |
Lithium ion ceLLS and batteries used in stationary electronic equipments—Safety technical specification 固定式电子设备用锂离子电池和电池组 安全技术规范 |
China National Standards LLS |
English PDF |
| GB/T 4214.8-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for electric cooking ranges, ovens, griLLS, microwave ovens and any combination of these 家用和类似用途电器噪声测试方法 电灶、烤箱、烤架、微波炉及其组合器具的特殊要求 |
China National Standards LLS |
English PDF |
| GB/T 26548.10-2021 |
Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 10: Percussive driLLS, hammers and breakers 手持便携式动力工具? 振动试验方法? 第10部分：冲击式凿岩机、锤和破碎器 |
China National Standards LLS |
English PDF |
| GB/T 40559-2021 |
Lithium ion ceLLS and batteries used in self-balancing vehicle—Safety requirements 平衡车用锂离子电池和电池组 安全要求 |
China National Standards LLS |
English PDF |
| GB/T 18910.201-2021 |
Liquid crystal display devices—Part 20-1:Visual inspection—Monochrome liquid crystal display ceLLS 液晶显示器件 第20-1部分：目检 单色液晶显示屏 |
China National Standards LLS |
English PDF |
| GB/T 39096-2020 |
Petroleum and natural gas industries—Aluminium alloy pipe for use as tubing for weLLS 石油天然气工业 油气井油管用铝合金管 |
China National Standards LLS |
English PDF |
| GB/T 38788-2020 |
Technical specification for establishment of porcine pluripotent stem ceLLS 猪多能干细胞建系技术规范 |
China National Standards LLS |
English PDF |
| GB/T 39482.3-2020 |
Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens—Part 3: Processing and analysis of data from dummy ceLLS 涂漆和未涂漆金属试样的电化学阻抗谱（EIS） 第3部分：从模拟电解池获得数据的处理和分析 |
China National Standards LLS |
English PDF |
| GB/T 39160-2020 |
Cadmium zinc telluride target for thin-film solar ceLLS 薄膜太阳能电池用碲锌镉靶材 |
China National Standards LLS |
English PDF |
| GB/T 38303-2019 |
Agricultural service—Specifications of skiLLS training for farmers 农业社会化服务 农民技能培训规范 |
China National Standards LLS |
English PDF |
| GB/T 15227-2019 |
Test method of air permeability, watertightness, wind load resistance performance for curtain waLLS 建筑幕墙气密、水密、抗风压性能检测方法 |
China National Standards LLS |
English PDF |
| GB/T 38303-2019 |
Agricultural service—Specifications of skiLLS training for farmers 农业社会化服务 农民技能培训规范 |
China National Standards LLS |
English PDF |
| GB/T 15227-2019 |
Test method of air permeability, watertightness, wind load resistance performance for curtain waLLS 建筑幕墙气密、水密、抗风压性能检测方法 |
China National Standards LLS |
English PDF |
| GB/T 37853-2019 |
Gel ink ball pens and refiLLS 中性墨水圆珠笔和笔芯 |
China National Standards LLS |
English PDF |
| GB/T 26714-2019 |
Ball point pens and refiLLS 油墨圆珠笔和笔芯 |
China National Standards LLS |
English PDF |
| GB/T 32017-2019 |
Roller ball pens and refiLLS 水性墨水圆珠笔和笔芯 |
China National Standards LLS |
English PDF |
| GB/T 37745-2019 |
Static and cyclic lateral load test methods for timber structure shear waLLS 木结构剪力墙静载和低周反复水平加载试验方法 |
China National Standards LLS |
English PDF |
| GB/T 19314.7-2019 |
Small craft—Hull construction and scantlings—Part 7:Scantling determination of multihuLLS 小艇 艇体结构和构件尺寸 第7部分：多体船尺寸的确定 |
China National Standards LLS |
English PDF |
| GB/T 19314.5-2019 |
Small craft—Hull construction and scantlings—Part 5:Design pressures for monohuLLS,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第5部分：单体船设计压力、设计应力、构件尺寸的确定 |
China National Standards LLS |
English PDF |
| GB/T 19314.4-2019 |
Small craft—Hull construction and scantlings—Part 5:Design pressures for monohuLLS,design stresses,scantlings determination 小艇 艇体结构和构件尺寸 第4部分：车间和制造 |
China National Standards LLS |
English PDF |
| GB/T 37047-2018 |
Lightning density based on lightning location systems(LLS)—General principles 基于雷电定位系统（LLS）的地闪密度-总则 |
China National Standards LLS |
English PDF |
| GB/T 37146-2018 |
Basic information description of electrical shipping biLLS for cross-border electronic commerce 跨境电子商务电子舱单基础信息描述 |
China National Standards LLS |
English PDF |
| GB/T 15163-2018 |
Technical regulations for setting apart hiLLS including sand area for tree growing 封山（沙）育林技术规程 |
China National Standards LLS |
English PDF |
| GB/T 36785-2018 |
Test methods of structural insulated panel waLLS of timber structures 结构用木质覆面板保温墙体试验方法 |
China National Standards LLS |
English PDF |
| GB/T 26071-2018 |
Monocrystalline silicon wafers for solar ceLLS 太阳能电池用硅单晶片 |
China National Standards LLS |
English PDF |
| GB/T 35989.1-2018 |
Petroleum and natural gas industries—Floating offshore structures—Part 1: MonohuLLS, semi-submersibles and spars 石油天然气工业 海上浮式结构 第1部分：单体船、半潜式平台和深吃水立柱式平台 |
China National Standards LLS |
English PDF |
| GB/T 6494-2017 |
Measurement method for electrical characteristics of aerospace solar ceLLS 航天用太阳电池电性能测试方法 |
China National Standards LLS |
English PDF |
| GB/T 34872-2017 |
Technical requirement of hydrogen supply system for proton exchange membrane fuel ceLLS 质子交换膜燃料电池供氢系统技术要求 |
China National Standards LLS |
English PDF |
| GB/T 6496-2017 |
Test method of aerospace solar ceLLS calibration 航天用太阳电池标定方法 |
China National Standards LLS |
English PDF |
| GB/T 34582-2017 |
Single cell and stack performance test methods for solid oxide fuel ceLLS (SOFC) 固体氧化物燃料电池单电池和电池堆性能试验方法 |
China National Standards LLS |
English PDF |
| GB/T 3883.201-2017 |
Safety of motor-operated hand-held,transportable and garden tools―Part 2: Particular requirements for driLLS and impact drills 手持式、可移式电动工具和园林工具的安全 第2部分：电钻和冲击电钻的专用要求 |
China National Standards LLS |
English PDF |
| GB/T 3883.306-2017 |
Safety of motor-operated hand-held,transportable and garden tools―Part 3: Particular requirements for transportable diamond driLLS with liquid systems 手持式、可移式电动工具和园林工具的安全 第3部分：可移式带液源金刚石钻的专用要求 |
China National Standards LLS |
English PDF |
| GB/T 15670.21-2017 |
Toxicological test methods for pesticides registration—Part 21: Unscheduled DNA synthesis (UDS) test with mammalian liver ceLLS in vivo 农药登记毒理学试验方法 第21部分：体内哺乳动物肝细胞程序外DNA合成(UDS)试验 |
China National Standards LLS |
English PDF |
| GB/T 15670.22-2017 |
Toxicological test methods for pesticides registration—Part 22:DNA damage and repair/unscheduled DNA synthesis in mammalian ceLLS in vitro 农药登记毒理学试验方法 第22部分：体外哺乳动物细胞DNA损害与修复/程序外DNA合成试验 |
China National Standards LLS |
English PDF |
| GB/T 15670.19-2017 |
Toxicological test methods for pesticides registration—Part 19: In vitro mammalian ceLLS chromosome aberration test 农药登记毒理学试验方法 第19部分：体外哺乳动物细胞染色体畸变试验 |
China National Standards LLS |
English PDF |
| GB/T 19830-2017 |
Petroleum and natural gas industries—Steel pipes for use as casing or tubing for weLLS 石油天然气工业 油气井套管或油管用钢管 |
China National Standards LLS |
English PDF |
| GB/T 33657-2017 |
Nanotechnologies—Electrical operating parameter test specification of wafer level nano-scale phase change memory ceLLS 纳米技术 晶圆级纳米尺度相变存储单元电学操作参数测试规范 |
China National Standards LLS |
English PDF |
| GB/T 26548.5-2017 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 5: DriLLS and impact drills 手持便携式动力工具 振动试验方法 第5部分：钻和冲击钻 |
China National Standards LLS |
English PDF |
| GB/T 23541-2017 |
Bonded abrasive products—Grinding wheel for steel baLLS 固结磨具 磨钢球砂轮 |
China National Standards LLS |
English PDF |
| GB/T 35569-2017 |
Code of practice of progeny test for Chinese Holstein buLLS 中国荷斯坦牛公牛后裔测定技术规程 |
China National Standards LLS |
English PDF |
| GB/T 35288-2017 |
Information security technology—Specification on the job skiLLS of certificate authority employees 信息安全技术 电子认证服务机构从业人员岗位技能规范 |
China National Standards LLS |
English PDF |
| GB/T 33292-2016 |
Metal hydride hydrogen storage system for fuel ceLLS backup power 燃料电池备用电源用金属氢化物储氢系统 |
China National Standards LLS |
English PDF |
| GB/T 33249-2016 |
Nanotechnology—Quantification of gold nanorods in living ceLLS—Extinction spectroscopy 纳米技术 活细胞内金纳米棒含量测定 消光光谱法 |
China National Standards LLS |
English PDF |
| GB/T 32800.3-2016 |
Hand-held non-electric power tools—Safety requirements—Part 3: DriLLS and tappers 手持式非电类动力工具 安全要求 第3部分：钻和攻丝机 |
China National Standards LLS |
English PDF |
| GB/T 19212.9-2016 |
Safety of transformers, reactors, power supply units and combinations thereof—Part 9: Particular requirements and tests for transformers and power supply units for beLLS and chimes 变压器、电抗器、电源装置及其组合的安全 第9部分：电铃和电钟用变压器及电源装置的特殊要求和试验 |
China National Standards LLS |
English PDF |
| GB/T 6078-2016 |
Centre driLLS 中心钻 |
China National Standards LLS |
English PDF |
| GB/T 1114-2016 |
shell end miLLS 套式立铣刀 |
China National Standards LLS |
English PDF |
| GB/T 31936-2015 |
RoLLS for welding steel pipe 焊接钢管轧辊 |
China National Standards LLS |
English PDF |
| GB/T 32017-2015 |
Roller ball pens and refiLLS 水性墨水圆珠笔和笔芯 |
China National Standards LLS |
English PDF |
| GB/T 31886.2-2015 |
Test method about the influence of gaseous contaminant(s) in reaction gas on the performance of proton exchange membrane fuel ceLLS——Part 2：Gaseous contaminant(s) in hydrogen 反应气中杂质对质子交换膜燃料电池性能影响的测试方法 第2部分：氢气中杂质 |
China National Standards LLS |
English PDF |
| GB/T 31886.1-2015 |
Test method about the influence of gaseous contaminant(s) in reaction gas on the performance of proton exchange membrane fuel ceLLS—Part 1：Gaseous contaminant(s) in air 反应气中杂质对质子交换膜燃料电池性能影响的测试方法 第1部分：空气中杂质 |
China National Standards LLS |
English PDF |
| GB/T 31703-2015 |
Ceramic ball bearings—Silicon nitride baLLS 陶瓷球轴承 氮化硅球 |
China National Standards LLS |
English PDF |
| GB/T 31433-2015 |
General specification for building curtain waLLS, windows and doors 建筑幕墙、门窗通用技术条件 |
China National Standards LLS |
English PDF |
| GB/T 31389-2015 |
Technical requirements and evaluation methods of solar reflective materials for exterior waLLS and roofs 建筑外墙及屋面用热反射材料技术条件及评价方法 |
China National Standards LLS |
English PDF |
| GB/T 31369-2015 |
Electronic grade hydrofluoric acid for solar ceLLS 太阳电池用电子级氢氟酸 |
China National Standards LLS |
English PDF |
| GB 15193.6-2014 |
National Food Safety Standard-Chromosome aberration test in mammalian bone marrow ceLLS 食品安全国家标准 哺乳动物骨髓细胞染色体畸变试验 |
China National Standards LLS |
English PDF |
| GB/T 32017-2015 |
Roller ball pens and refiLLS 水性墨水圆珠笔和笔芯 |
China National Standards LLS |
English PDF |
| GB 31241-2014 |
Lithium ion ceLLS and batteries used in portable electronic equipments―Safety requirements 便携式电子产品用锂离子电池和电池组 安全要求 |
China National Standards LLS |
English PDF |
| GB/T 20042.7-2014 |
Proton exchange membrane fuel ceLLS―Part 7: Test method of carbon paper properties 质子交换膜燃料电池 第7部分：炭纸特性测试方法 |
China National Standards LLS |
English PDF |
| GB 50410-2014 |
Code for design of section steel hot rolling MiLLS 型钢轧钢工程设计规范 |
China National Standards LLS |
English PDF |
| GB 15193.23-2014 |
National Food Safety Standard-Chromosome aberration test of mammalian ceLLS in vitro 食品安全国家标准 体外哺乳细胞染色体畸变试验 |
China National Standards LLS |
English PDF |
| GB 10395.9-2014 |
Agricultural and forestry machinery—Safety—Part 9: Seed driLLS 农林机械 安全 第9部分：播种机械 |
China National Standards LLS |
English PDF |
| GB/T 30860-2014 |
Test methods for surface roughness and saw mark of silicon wafers for solar ceLLS 太阳能电池用硅片表面粗糙度及切割线痕测试方法 |
China National Standards LLS |
English PDF |
| GB/T 30859-2014 |
Test method for warp and waviness of silicon wafers for solar ceLLS 太阳能电池用硅片翘曲度和波纹度测试方法 |
China National Standards LLS |
English PDF |
| GB 51010-2014 |
Code for design of shutting down/restarting aluminum reduction ceLLS without power interruption 铝电解系列不停电停开槽设计规范 |
China National Standards LLS |
English PDF |
| GB/T 30426-2013 |
Secondary ceLLS and batteries containing alkaline or other non-acid electrolytes—Secondary lithium cells and batteries for portable applications 含碱性或其它非酸性电解质的蓄电池和蓄电池组 便携式锂蓄电池和蓄电池组 |
China National Standards LLS |
English PDF |
| GB/T 30040.6-2013 |
Leak detection systems―Part 6：Sensors in monitoring weLLS 双层罐渗漏检测系统 第6部分：监测井用传感器显示系统 |
China National Standards LLS |
English PDF |
| GB/T 29908-2013 |
Classification and test method of air-blast resistance performance for curtain waLLS,windows and doors 玻璃幕墙和门窗抗爆炸冲击波性能分级及检测方法 |
China National Standards LLS |
English PDF |
| GB/T 29907-2013 |
Test method for watertightness of curtain waLLS under dynamic wind pressure 建筑幕墙动态风压作用下水密性能检测方法 |
China National Standards LLS |
English PDF |
| GB/T 308.1-2013 |
Rolling bearings - BaLLS - Part 1: Steel balls 滚动轴承 球 第1部分：钢球 |
China National Standards LLS |
English PDF |
| GB/T 29738-2013 |
Graduations and test method for performance of exterior windows and doors, curtain waLLS impacted by windborne debris in windstorm 建筑幕墙和门窗抗风携碎物冲击性能分级及检测方法 |
China National Standards LLS |
English PDF |
| GB/T 18423-2013 |
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing waLLS 橡胶和塑料软管及非增强软管 液体壁透性测定 |
China National Standards LLS |
English PDF |
| GB/T 18287-2013 |
General specification of lithium-ion ceLLS and batteries for mobile phone 移动电话用锂离子蓄电池及蓄电池组总规范 |
China National Standards LLS |
English PDF |
| GB/T 29043-2012 |
Graduation and test method for thermal insulating properties of curtain waLLS 建筑幕墙保温性能分级及检测方法 |
China National Standards LLS |
English PDF |
| GB/T 29331-2012 |
Photography - Paper dimensions - RoLLS for printers 摄影 相纸尺寸 印片机用卷筒相纸 |
China National Standards LLS |
English PDF |
| GB/T 1112-2012 |
Slot driLLS 键槽铣刀 |
China National Standards LLS |
English PDF |
| GB/T 29195-2012 |
General specification of crystalline silicon terrestrial solar ceLLS 地面用晶体硅太阳电池总规范 |
China National Standards LLS |
English PDF |
| GB/T 18270-2012 |
Electrolyte for vented nickel-cadmium ceLLS 排气式镉镍蓄电池用电解液 |
China National Standards LLS |
English PDF |
| GB 50500-2013 |
Code of biLLS of quantities and valuation for construction works 建设工程工程量清单计价规范 |
China National Standards LLS |
English PDF |
| GB/T 15547-2012 |
Blanks of forged steel roLLS for cold rolling mill 锻钢冷轧辊辊坯 |
China National Standards LLS |
English PDF |
| GB 3883.6-2012 |
Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for driLLS and impact drills 手持式电动工具的安全 第2部分：电钻和冲击电钻的专用要求 |
China National Standards LLS |
English PDF |
| GB/T 28872-2012 |
Testing method of magnetic lightly-striking mode atomic force microscope for nanotopography of living ceLLS 活细胞样品纳米结构的磁驱动轻敲模式原子力显微镜检测方法 |
China National Standards LLS |
English PDF |
| GB/T 28867-2012 |
Secondary ceLLS and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells 含碱性或其它非酸性电解质的蓄电池和蓄电池组 方形密封镉镍单体蓄电池 |
China National Standards LLS |
English PDF |
| GB/T 28248-2012 |
Cemented carbide driLLS for printed boards 印制板用硬质合金钻头 |
China National Standards LLS |
English PDF |
| GB/T 27820-2011 |
Chemicals - Test method of in vitro mammalian ceLLS sister chromatid exchange 化学品 体外哺乳动物细胞姊妹染色单体交换试验方法 |
China National Standards LLS |
English PDF |
| GB/T 7169-2011 |
Designation of secondary ceLLS and batteries containing alkaline or other non-acid electrolytes 含碱性或其它非酸性电解质的蓄电池和蓄电池组型号命名方法 |
China National Standards LLS |
English PDF |
| GB/T 28164-2011 |
Secondary ceLLS and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable application 含碱性或其它非酸性电解质的蓄电池和蓄电池组 便携式密封蓄电池和蓄电池组的安全性要求 |
China National Standards LLS |
English PDF |
| GB/T 28163-2011 |
Secondary ceLLS and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries 含碱性或其它非酸性电解质的蓄电池及蓄电池组 便携式密封蓄电池和蓄电池组的机械试验 |
China National Standards LLS |
English PDF |
| GB/T 15142-2011 |
Secondary ceLLS and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells 含碱性或其它非酸性电解质的蓄电池和蓄电池组 方形排气式镉镍单体蓄电池 |
China National Standards LLS |
English PDF |
| GB/T 19830-2011 |
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for weLLS 石油天然气工业 油气井套管或油管用钢管 |
China National Standards LLS |
English PDF |
| GB/Z 27753-2011 |
Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel ceLLS 质子交换膜燃料电池膜电极工况适应性测试方法 |
China National Standards LLS |
English PDF |
| GB/T 26791-2011 |
Glass ceLLS 玻璃比色皿 |
China National Standards LLS |
English PDF |
| GB/T 26714-2011 |
Ball point pens and refiLLS 油墨圆珠笔和笔芯 |
China National Standards LLS |
English PDF |
| GB/T 26071-2010 |
Mono-crystalline silicon as cut slices for photovoltaic solar ceLLS 太阳能电池用硅单晶切割片 |
China National Standards LLS |
English PDF |
| GB/T 25992-2010 |
Solid ball-nosed end miLLS with cylindrical shanks made of carbide and ceramic materials - Dimensions 整体硬质合金和陶瓷直柄球头立铣刀 尺寸 |
China National Standards LLS |
English PDF |
| GB/T 25980-2010 |
Road vehicles - Coupling baLLS for caravans and light trailers - Dimensions 道路车辆 旅居挂车和轻型挂车的连接球 尺寸 |
China National Standards LLS |
English PDF |
| GB/T 25825-2010 |
RoLLS for hot strip mill and plate mill 热轧钢板带轧辊 |
China National Standards LLS |
English PDF |
| GB/T 25672-2010 |
Hammer driLLS and Shell hammer drills 电锤钻和套式电锤钻 |
China National Standards LLS |
English PDF |
| GB/T 25670-2010 |
End miLLS with brazed angular hardmetal tips 硬质合金斜齿立铣刀 |
China National Standards LLS |
English PDF |
| GB/T 25667.3-2010 |
Solid carbide twist driLLS with parallel shank Part3: Technical specifications 整体硬质合金直柄麻花钻 第3部分：技术条件 |
China National Standards LLS |
English PDF |
| GB/T 25667.2-2010 |
Solid carbide twist driLLS with parallel shank Part2: The types and dimensions for parallel shank twist drills with 2°anguar fiants 整体硬质合金直柄麻花钻 第2部分：2°斜削平直柄麻花钻型式与尺寸 |
China National Standards LLS |
English PDF |
| GB/T 25667.1-2010 |
Solid carbide twist driLLS with parallel shank Part1: The types and dimensions for parallel shank twist drills 整体硬质合金直柄麻花钻 第1部分：直柄麻花钻型式与尺寸 |
China National Standards LLS |
English PDF |
| GB/T 25666-2010 |
Parallel shank twist driLLS with carbide tips 硬质合金直柄麻花钻 |
China National Standards LLS |
English PDF |
| GB/T 25665-2010 |
Solid end miLLS with corner radii and cylindrical shanks made of hard cutting materials - Dimensions 整体硬切削材料直柄圆弧立铣刀 尺寸 |
China National Standards LLS |
English PDF |
| GB/T 308.2-2010 |
Rolling bearings - BaLLS - Part 2: Ceramic balls 滚动轴承 球 第2部分：陶瓷球 |
China National Standards LLS |
English PDF |
| GB/T 25603-2010 |
Earth-moving machinery - Horizontal directional driLLS - Terminology 土方机械 水平定向钻机 术语 |
China National Standards LLS |
English PDF |
| GB/T 6118-2010 |
End miLLS - Technical specifications 立铣刀技术条件 |
China National Standards LLS |
English PDF |
| GB/T 6117.3-2010 |
End miLLS - Part 3: Milling cutters with 7：24 taper shanks 立铣刀 第3部分：7:24锥柄立铣刀 |
China National Standards LLS |
English PDF |
| GB/T 6117.2-2010 |
End miLLS - Part 2: Milling cutters with morse taper shanks 立铣刀 第2部分：莫氏锥柄立铣刀 |
China National Standards LLS |
English PDF |
| GB/T 6117.1-2010 |
End miLLS - Part 1: Milling cutters with parallel shanks 立铣刀 第1部分：直柄立铣刀 |
China National Standards LLS |
English PDF |
| GB/T 17984-2010 |
Twist driLLS - Technical specifications 麻花钻 技术条件 |
China National Standards LLS |
English PDF |
| GB/T 50625-2010 |
Technical code for water weLLS 机井技术规范 |
China National Standards LLS |
English PDF |
| GB/T 24764-2009 |
Steel slag sand for polymer modified mortar for external thermal insulation on outer-waLLS 外墙外保温抹面砂浆和粘结砂浆用钢渣砂 |
China National Standards LLS |
English PDF |
| GB 50520-2009 |
Code for safety design of uranium miLLS tailings pond in nuclear industry 核工业铀水冶厂尾矿库、尾渣库安全设计规范 |
China National Standards LLS |
English PDF |
| GB/T 24498-2009 |
Gaskets for doors , windows and curtain waLLS of buildings 建筑门窗、幕墙用密封胶条 |
China National Standards LLS |
English PDF |
| GB/T 24495-2009 |
Horizontal joints between load-bearing waLLS and concrete floors - Laboratory mechanical tests - Effect of vertical loading and of moments transmitted by the floors 承重墙与混凝土楼板间的水平接缝 实验室力学试验 由楼板传来的垂直荷载和弯矩的影响 |
China National Standards LLS |
English PDF |
| GB/T 17445-2009 |
Cast grinding baLLS 铸造磨球 |
China National Standards LLS |
English PDF |
| GB/T 23875-2009 |
Spray-dried animal blood ceLLS for feedstuffs 饲料用喷雾干燥血球粉 |
China National Standards LLS |
English PDF |
| GB/T 23541-2009 |
Bonded abrasive products - Grinding wheel for steel baLLS 固结磨具 磨钢球砂轮 |
China National Standards LLS |
English PDF |
| GB/T 15722-2009 |
Competitive qualification of medical stardard of volleybaLLSitting for disabled athletes 残疾人坐地排球运动员参赛资格的医学标准 |
China National Standards LLS |
English PDF |
| GB/T 22676-2008 |
Impact driLLS 冲击电钻 |
China National Standards LLS |
English PDF |
| GB 4706.37-2008 |
Household and similar electrical appliances - Safety - Particular requirements for commercial electric griddles and griddle griLLS 家用和类似用途电器的安全 商用单双面电热铛的特殊要求 |
China National Standards LLS |
English PDF |
| GB 4706.14-2008 |
Household and similar electrical appliances - Safety - Particular requirements for griLLS, toasters and similar portable cooking appliances 家用和类似用途电器的安全 烤架、面包片烘烤器及类似用途便携式烹饪器具的特殊要求 |
China National Standards LLS |
English PDF |
| GB 17498.6-2008 |
Stationary training equipment - Part 6: TreadmiLLS - Additional specific safety requirements and test methods 固定式健身器材 第6部分：跑步机 附加的特殊安全要求和试验方法 |
China National Standards LLS |
English PDF |
| GB/T 22665.1-2008 |
Measurement of vibrations at the handle of hand-held electric tools - Part 1: DriLLS and impact drills 手持式电动工具手柄的振动测量方法 第1部分：电钻和冲击钻 |
China National Standards LLS |
English PDF |
| GB/T 7025.2-2008 |
Lifts - Main specifications and the dimensions arrangements for its cars, weLLS and machine rooms - Part 2: Lifts of class Ⅳ 电梯主参数及轿厢、井道、机房的型式与尺寸 第2部分：Ⅳ类电梯 |
China National Standards LLS |
English PDF |
| GB/T 7025.1-2008 |
Lifts - Main specifications and the dimensions, arrangements for its cars, weLLS and machine rooms - Part 1: Lifts of classesⅠ、Ⅱ、Ⅲ、Ⅵ 电梯主参数及轿厢、井道、机房的型式与尺寸 第1部分：Ⅰ、Ⅱ、Ⅲ、Ⅵ类电梯 |
China National Standards LLS |
English PDF |
| GB/T 6135.4-2008 |
Parallel shank twist driLLS - Part 4: The types and dimensions for extra long parallel shank twist drills 直柄麻花钻 第4部分：直柄超长麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 6135.3-2008 |
Parallel shank twist driLLS - Part 3: The types and dimensions for parallel shank long series twist drills 直柄麻花钻 第3部分：直柄长麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 6135.2-2008 |
Parallel shank twist driLLS - Part 2: The types and dimensions for parallel shank stub series twisl drills and parallel shank jobber series twist drills 直柄麻花钻 第2部分：直柄短麻花钻和直柄麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 6135.1-2008 |
Parallel shank twist driLLS - Part 1: The types and dimensions for small type twist drills with oversize parallel shank 直柄麻花钻 第1部分：粗直柄小麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 1438.4-2008 |
Taper shank twist driLLS - Part 4: The types and dimensions extra-long for Morse taper shank twist drills 锥柄麻花钻 第4部分：莫氏锥柄超长麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 1438.3-2008 |
Taper shank twist driLLS - Part 3: The types and dimensions for lengthened Morse taper shank twist drills 锥柄麻花钻 第3部分：莫氏锥柄加长麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 1438.2-2008 |
Taper shank twist driLLS - Part 2: The types and dimensions for long Morse taper shank twist drills 锥柄麻花钻 第2部分：莫氏锥柄长麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 1438.1-2008 |
Taper shank twist driLLS - Part 1: The types and dimensions for Morse taper shank twist drills 锥柄麻花钻 第1部分：莫氏锥柄麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 17109-2008 |
Package of grain seLLS 粮食销售包装 |
China National Standards LLS |
English PDF |
| GB/T 13313-2008 |
Methods of shore and leeb hardness testing for roLLS 轧辊肖氏、里氏硬度试验方法 |
China National Standards LLS |
English PDF |
| GB/T 1504-2008 |
Cast iron roLLS 铸铁轧辊 |
China National Standards LLS |
English PDF |
| GB/T 1503-2008 |
Cast steel roLLS 铸钢轧辊 |
China National Standards LLS |
English PDF |
| GB/T 7551-2008 |
Load ceLLS 称重传感器 |
China National Standards LLS |
English PDF |
| GB/T 2900.41-2008 |
Electrotechnical terminology - Primary and secondary ceLLS and batteries 电工术语 原电池和蓄电池 |
China National Standards LLS |
English PDF |
| GB/T 6848-2008 |
Cinematography - Cores for motion-picture and magnetic film roLLS - Dimensions 电影 电影胶片和涂磁胶片卷的片芯 尺寸 |
China National Standards LLS |
English PDF |
| GB/T 22084.2-2008 |
Secondary ceLLS and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride 含碱性或其它非酸性电解质的蓄电池和蓄电池组 便携式密封单体蓄电池 第2部分：金属氢化物镍电池 |
China National Standards LLS |
English PDF |
| GB/T 22084.1-2008 |
Secondary ceLLS and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1:Nickel-cadmium 含碱性或其它非酸性电解质的蓄电池和蓄电池组 便携式密封单体蓄电池 第1部分：镉镍电池 |
China National Standards LLS |
English PDF |
| GB/T 18910.3-2008 |
Liquid crystal and solid-state display devices - Part 3: Sectional specification for liquid crystal display (LCD) ceLLS 液晶和固态显示器件 第3部分: 液晶显示屏分规范 |
China National Standards LLS |
English PDF |
| GB 21966-2008 |
Safety of primary and secondary lithium ceLLS and batteries during transport 锂原电池和蓄电池在运输中的安全要求 |
China National Standards LLS |
English PDF |
| GB/T 16770.2-2008 |
Solid hardmetal end miLLS with parallel shank - Part 2: Technical specifications 整体硬质合金直柄立铣刀 第2部分：技术条件 |
China National Standards LLS |
English PDF |
| GB/T 16770.1-2008 |
Solid hardmetal end miLLS with parallel shank - Part 1: Dimensions 整体硬质合金直柄立铣刀 第1部分：型式与尺寸 |
China National Standards LLS |
English PDF |
| GB/T 16456.4-2008 |
End miLLS with brazed helical hardmetal tips - Part 4：Technical specifications 硬质合金螺旋齿立铣刀 第4部分：技术条件 |
China National Standards LLS |
English PDF |
| GB/T 16456.3-2008 |
End miLLS with brazed helical hardmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分：莫氏锥柄立铣刀 型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 16456.2-2008 |
End miLLS with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分：7:24 锥柄立铣刀 型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 16456.1-2008 |
End miLLS with brazed helical hardmetal tips - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分：直柄立铣刀 型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 15307-2008 |
DriLLS with Indexable inserts - Cylindrical shanks with a parallel flat 可转位钻头用削平直柄 |
China National Standards LLS |
English PDF |
| GB/T 15305.2-2008 |
Coated abrasives - Abrasive roLLS 涂附磨具 砂卷 |
China National Standards LLS |
English PDF |
| GB/T 14298-2008 |
Helical end miLLS with indexable inserts 可转位螺旋立铣刀 |
China National Standards LLS |
English PDF |
| GB/T 13314-2008 |
General specifications of forged steel work roLLS for cold rolling 锻钢冷轧工作辊 通用技术条件 |
China National Standards LLS |
English PDF |
| GB/T 21768-2008 |
Chemical - Test method of DNA damage and repair/unscheduled DNA synthesis with mammalian ceLLS in vitro 化学品 体外哺乳动物细胞DNA损伤与修复/非程序性DNA合成试验方法 |
China National Standards LLS |
English PDF |
| GB/T 21767-2008 |
Chemical - Test method of unscheduled DNA synthesis (UDS) test with mammalian liver ceLLS In Vivo 化学品 体内哺乳动物肝细胞非程序性DNA合成(UDS)试验方法 |
China National Standards LLS |
English PDF |
| GB/T 17680.12-2008 |
Criteria for emergency planning and preparedness for nuclear power plants - Part 12：planning, development, conduct, and evaluation of nuclear emergency driLLS and exercises 核电厂应急计划与准备准则 第12部分：核应急练习与演习的计划、准备、实施与评估 |
China National Standards LLS |
English PDF |
| GB/T 10799-2008 |
Rigid cellular plastics - Determination of the volume percentage of open ceLLS and of closed cells 硬质泡沫塑料 开孔和闭孔体积百分率的测定 |
China National Standards LLS |
English PDF |
| GB/T 6971-2007 |
Test method for feed miLLS 饲料粉碎机 试验方法 |
China National Standards LLS |
English PDF |
| GB/T 15227-2007 |
Test method of air permeability, watertightness, wind load resistance performance for curtain waLLS 建筑幕墙气密、水密、抗风压性能检测方法 |
China National Standards LLS |
English PDF |
| GB/T 6139-2007 |
Subland twist driLLS - Technical specifications 阶梯麻花钻 技术条件 |
China National Standards LLS |
English PDF |
| GB 21009-2007 |
Mine blast-hole driLLS - Safety requirements 矿用炮孔钻机 安全要求 |
China National Standards LLS |
English PDF |
| GB/T 6138.2-2007 |
Subland twist driLLS for holes prior to tapping screw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分：莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 6138.1-2007 |
Subland twist driLLS for holes prior to tapping screw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分：直柄阶梯麻花钻的型式和尺寸 |
China National Standards LLS |
English PDF |
| GB/T 20954-2007 |
Metal cutting tools - Terms in twist driLLS 金属切削刀具 麻花钻术语 |
China National Standards LLS |
English PDF |
| GB/T 18910.4-2007 |
Liquid crystal and solid-state display devices - Part 4: Liquid crystal display modules and ceLLS - Essential ratings and characteristics 液晶和固态显示器件 第4部分：液晶显示模块和屏 基本额定值和特性 |
China National Standards LLS |
English PDF |
| GB/T 5580-2007 |
DriLLS 电钻 |
China National Standards LLS |
English PDF |
| GB/T 20773-2006 |
Die singking end miLLS 模具铣刀 |
China National Standards LLS |
English PDF |
| GB/T 10947-2006 |
Taper shank twist driLLS with carbide tips 硬质合金锥柄麻花钻 |
China National Standards LLS |
English PDF |
| GB/T 8910.6-2006 |
Hand-held portable power tools - Measurements of vibrations at the handle - Part 6: Impact driLLS 手持便携式动力工具 手柄振动测量方法 第6部分: 冲击钻 |
China National Standards LLS |
English PDF |
| Find out:233Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
