Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 45155-2024 |
Quality management-Guidelines for understanding, evaluating and improving the quality cuLTure of organizations {译} 质量管理-理解、评价和改进组织的质量文化指南 |
China National Standards LT |
 English PDF |
| GB/T 30137-2024 |
Power quality-voLTage swell, voltage sag and short interruption {译} 电能质量-电压暂升、电压暂降与短时中断 |
China National Standards LT |
English PDF |
| GB/T 22247-2024 |
Determination of icariin in heaLTh foods {译} 保健食品中淫羊藿苷的测定 |
China National Standards LT |
English PDF |
| GB/T 22249-2024 |
Determination of lycopene in heaLTh foods {译} 保健食品中番茄红素的测定 |
China National Standards LT |
English PDF |
| GB/T 22252-2024 |
Determination of coenzyme Q10 in heaLTh foods {译} 保健食品中辅酶Q10的测定 |
China National Standards LT |
English PDF |
| GB/T 22251-2024 |
Determination of puerarin in heaLTh foods {译} 保健食品中葛根素的测定 |
China National Standards LT |
English PDF |
| GB/T 45168-2024 |
Determination of chromium picolinate in heaLTh foods {译} 保健食品中吡啶甲酸铬的测定 |
China National Standards LT |
English PDF |
| GB/T 45167-2024 |
Investment castings of steel, nickel alloy castings and cobaLT alloy castings-Visual inspection method for surface quality {译} 熔模铸钢件、镍合金铸件和钴合金铸件-表面质量目视检测方法 |
China National Standards LT |
English PDF |
| GB/T 18216.11-2024 |
Electrical safety of low-voLTage distribution systems of AC 1000V and DC 1500V and below-Test, measuring or monitoring equipment for protective measures-Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems {译} 交流1000V和直流1500V及以下低压配电系统电气安全-防护措施的试验、测量或监控设备-第11部分：TT、TN和IT系统中剩余电流监视器（RCM）的有效性 |
China National Standards LT |
English PDF |
| GB/T 29301-2024 |
Toner cartridges for electrostatic copying (including muLTi-function) equipment {译} 静电复印（包括多功能）设备用鼓粉盒 |
China National Standards LT |
English PDF |
| GB/T 22371-2024 |
Environmental protection requirements for fax machines, muLTi-function composite fax machines {译} 传真机、多功能复合型传真机环境保护要求 |
China National Standards LT |
English PDF |
| GB/T 18892-2024 |
Environmental protection requirements for copying machinery-Energy-saving requirements for copying machines and muLTi-function machines {译} 复印机械环境保护要求-复印机及多功能一体机节能要求 |
China National Standards LT |
English PDF |
| GB/T 16895.3-2024 |
Low voLTage electrical installations - Part 5-54: Selection and installation of electrical equipment - Grounding arrangements and protective conductors {译} 低压电气装置-第5-54部分：电气设备的选择和安装-接地配置和保护导体 |
China National Standards LT |
English PDF |
| GB/T 45119-2024 |
Technical requirements for insulation monitoring of low-voLTage power systems in power plants and stations {译} 电力厂站低压用电系统的绝缘监测技术要求 |
China National Standards LT |
English PDF |
| GB/Z 45152-2024 |
Aging society - framework for integrated community-based heaLTh and care services {译} 老龄化社会-基于社群的综合保健与照顾服务框架 |
China National Standards LT |
English PDF |
| GB/T 44930-2024 |
Requirements for the interface between high-aLTitude scientific balloon platforms and payloads {译} 高空科学气球平台与有效载荷接口要求 |
China National Standards LT |
English PDF |
| GB/T 45120-2024 |
Road vehicles - 48V supply voLTage - Electrical requirements and tests {译} 道路车辆-48V供电电压-电气要求及试验 |
China National Standards LT |
English PDF |
| GB/T 44985.3-2024 |
General technical requirements for agricuLTural Internet of Things - Part 3: Aquaculture {译} 农业物联网通用技术要求-第3部分：水产养殖 |
China National Standards LT |
English PDF |
| GB/T 44985.4-2024 |
General technical requirements for agricuLTural Internet of Things - Part 4: Livestock and poultry farming {译} 农业物联网通用技术要求-第4部分：畜禽养殖 |
China National Standards LT |
English PDF |
| GB/T 44985.1-2024 |
General technical requirements for agricuLTural Internet of Things - Part 1: Field planting {译} 农业物联网通用技术要求-第1部分：大田种植 |
China National Standards LT |
English PDF |
| GB/T 12357.1-2024 |
MuLTimode optical fiber for communication - Part 1: Characteristics of multimode optical fiber of category A1 {译} 通信用多模光纤-第1部分：A1类多模光纤特性 |
China National Standards LT |
English PDF |
| GB/T 45112-2024 |
LTE-based wireless communication technology for Internet of Vehicles - Technical requirements for safety certificate management system {译} 基于LTE的车联网无线通信技术-安全证书管理系统技术要求 |
China National Standards LT |
English PDF |
| GB/T 44923-2024 |
Three-dimensional head model of aduLTs {译} 成年人三维头部模型 |
China National Standards LT |
English PDF |
| GB/T 45148-2024 |
Basic requirements for resources and technologies of digital cuLTural centers {译} 数字文化馆资源和技术基本要求 |
China National Standards LT |
English PDF |
| GB/T 45137-2024 |
Technical regulations for genome editing breeding of livestock and pouLTry {译} 畜禽基因组编辑育种技术规程 |
China National Standards LT |
English PDF |
| GB/T 45021.1-2024 |
PhotovoLTaic module performance test and energy assessment-Part 1: Irradiance and temperature performance measurement and power assessment {译} 光伏组件性能测试和能量评定-第1部分：辐照度和温度性能测量和功率评定 |
China National Standards LT |
English PDF |
| GB/T 45075-2024 |
General specification for cascade utilization of retired photovoLTaic modules {译} 退役光伏组件梯次利用通用规范 |
China National Standards LT |
English PDF |
| GB/T 19799.2-2024 |
Non-destructive testing-ULTrasonic test blocks-Part 2: Standard test blocks No. 2 {译} 无损检测-超声检测试块-第2部分：2号标准试块 |
China National Standards LT |
English PDF |
| GB/T 44916-2024 |
Ships and marine technology-Marine uLTra-low temperature gate valves-Design and test requirements {译} 船舶和海上技术-船用超低温闸阀-设计与试验要求 |
China National Standards LT |
English PDF |
| GB/T 45035-2024 |
Cotton concentrated maturity CuLTivation technology requirements {译} 棉花集中成熟栽培技术要求 |
China National Standards LT |
English PDF |
| GB/T 19701.5-2024 |
Surgical implants-ULTra-high molecular weight polyethylene-Part 5: Morphological evaluation methods {译} 外科植入物-超高分子量聚乙烯-第5部分：形态评价方法 |
China National Standards LT |
English PDF |
| GB/T 19701.3-2024 |
Surgical implants-ULTra-high molecular weight polyethylene-Part 3: Accelerated aging Chemical methods {译} 外科植入物-超高分子量聚乙烯-第3部分：加速老化方法 |
China National Standards LT |
English PDF |
| GB/T 19701.2-2024 |
Surgical implants-ULTra-high molecular weight polyethylene-Part 2: Molding compounds {译} 外科植入物-超高分子量聚乙烯-第2部分：模塑料 |
China National Standards LT |
English PDF |
| GB/T 19701.1-2024 |
Surgical implants-ULTra-high molecular weight polyethylene-Part 1: Powders {译} 外科植入物-超高分子量聚乙烯-第1部分：粉料 |
China National Standards LT |
English PDF |
| GB/T 23367.1-2024 |
Chemical analysis methods for lithium cobaLT oxide - Part 1: Determination of cobalt content - EDTA - Titration and potentiometric titration {译} 钴酸锂化学分析方法-第1部分：钴含量的测定-EDTA-滴定法和电位滴定法 |
China National Standards LT |
English PDF |
| GB/T 18281.5-2024 |
Sterilization of heaLThcare products - Biological indicators - Part 5: Biological indicators for low-temperature steam formaldehyde sterilization {译} 医疗保健产品灭菌-生物指示物-第5部分：低温蒸汽甲醛灭菌用生物指示物 |
China National Standards LT |
English PDF |
| GB/T 18281.8-2024 |
Sterilization of heaLThcare products - Biological indicators - Part 8: Confirmation method for shortening the incubation time of biological indicators {译} 医疗保健产品灭菌-生物指示物-第8部分：缩短生物指示物培养时间的确认方法 |
China National Standards LT |
English PDF |
| GB/T 45079-2024 |
Artificial intelligence - Technical specifications for deep learning framework muLTi-hardware platform adaptation {译} 人工智能-深度学习框架多硬件平台适配技术规范 |
China National Standards LT |
English PDF |
| GB/T 18281.4-2024 |
Sterilization of heaLThcare products - Biological indicators - Part 4: Biological indicators for dry heat sterilization {译} 医疗保健产品灭菌-生物指示物-第4部分：干热灭菌用生物指示物 |
China National Standards LT |
English PDF |
| GB/T 18281.3-2024 |
Sterilization of heaLTh care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization {译} 医疗保健产品灭菌-生物指示物-第3部分：湿热灭菌用生物指示物 |
China National Standards LT |
English PDF |
| GB/T 18281.2-2024 |
Sterilization of heaLTh care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization {译} 医疗保健产品灭菌-生物指示物-第2部分：环氧乙烷灭菌用生物指示物 |
China National Standards LT |
English PDF |
| GB/T 18281.1-2024 |
Sterilization of heaLTh care products - Biological indicators - Part 1: General {译} 医疗保健产品灭菌-生物指示物-第1部分：通则 |
China National Standards LT |
English PDF |
| GB/T 36732-2024 |
Ecological leisure and heaLTh base construction and operation service specifications {译} 生态休闲养生基地建设和运营服务规范 |
China National Standards LT |
English PDF |
| GB/T 3260.1-2024 |
Chemical analysis method for tin - Part 1: Determination of copper, lead, zinc, cadmium, silver, nickel and cobaLT content - Flame atomic absorption spectrometry {译} 锡化学分析方法-第1部分：铜、铅、锌、镉、银、镍和钴含量的测定-火焰原子吸收光谱法 |
China National Standards LT |
English PDF |
| GB/Z 44946-2024 |
Hydraulic transmission - FiLTer element test method - Actual life assessment {译} 液压传动-滤芯试验方法-实际寿命评定 |
China National Standards LT |
English PDF |
| GB/T 45006-2024 |
Fiber-reinforced composite puLTruded sheets for wind turbine blades {译} 风电叶片用纤维增强复合材料拉挤板材 |
China National Standards LT |
English PDF |
| GB/T 21099.5-2024 |
Equipment and integration in enterprise systems-Function blocks (FB) and electronic device description language (EDDL) for process control-Part 5: EDDL buiLT-in library {译} 企业系统中的设备和集成-过程控制用功能块（FB）和电子设备描述语言（EDDL）-第5部分：EDDL内置库 |
China National Standards LT |
English PDF |
| GB/T 44922-2024 |
Additive manufacturing Manufacturing-Identification Principles-Qualification of Operators of Metal Laser Powder Bed MeLTing Equipment for Aerospace {译} 增材制造-鉴定原则-航空航天用金属激光粉末床熔融设备操作人员资格鉴定 |
China National Standards LT |
English PDF |
| GB/T 45016-2024 |
Test method for mechanical automatic tensioner of engine accessory beLT drive system {译} 发动机附件带传动系统机械式自动张紧轮试验方法 |
China National Standards LT |
English PDF |
| GB/T 44836-2024 |
Textiles-Determination of glyphosate and its saLTs {译} 纺织品-草甘膦及其盐的测定 |
China National Standards LT |
English PDF |
| GB/T 45019-2024 |
BasaLT fiber asphalt mixture for roads {译} 道路用玄武岩纤维沥青混合料 |
China National Standards LT |
English PDF |
| GB/T 34430.4-2024 |
Ships and marine technology-Protective coatings and inspection methods-Part 4: Automated measurement method for total content of water-soluble saLTs {译} 船舶与海上技术-保护涂层和检查方法-第4部分：水溶性盐总含量的自动化测量方法 |
China National Standards LT |
English PDF |
| GB/T 44969-2024 |
Methods for eliminating metal ions in water-soluble extracts of agricuLTural products-ion exchange method {译} 农产品水溶性提取物中金属离子消除方法-离子交换法 |
China National Standards LT |
English PDF |
| GB/T 44995-2024 |
Polypropylene packaging containers-Guidelines for the construction of preliminary screening test methods for aduLTerated recycled plastics {译} 聚丙烯包装容器-掺杂回收塑料初筛测试方法构建指南 |
China National Standards LT |
English PDF |
| GB/T 44970-2024 |
Grain and oil machinery-air cushion beLT conveyor {译} 粮油机械-气垫带式输送机 |
China National Standards LT |
English PDF |
| GB/T 18912-2024 |
SaLT spray corrosion test for photovoltaic modules {译} 光伏组件盐雾腐蚀试验 |
China National Standards LT |
English PDF |
| GB/T 44996-2024 |
General technical requirements for forming, filling and sealing machines for edible saLT bags {译} 食用盐袋成型充填封口机通用技术要求 |
China National Standards LT |
English PDF |
| GB 4234.7-2024 |
Surgical implants - Metallic materials - Part 7: Forged and cold worked cobaLT-chromium-nickel-molybdenum-iron alloys {译} 外科植入物-金属材料-第7部分：可锻和冷加工的钴-铬-镍-钼-铁合金 |
China National Standards LT |
English PDF |
| GB 4234.12-2024 |
Surgical implants - Metallic materials - Part 12: Forged cobaLT-chromium-molybdenum alloys {译} 外科植入物-金属材料-第12部分：锻造钴-铬-钼合金 |
China National Standards LT |
English PDF |
| GB/T 44900-2024 |
Technical specifications for uLTra-gravity enhanced fluorination reaction process reengineering {译} 超重力强化氟化反应流程再造技术规范 |
China National Standards LT |
English PDF |
| GB/T 16895.24-2024 |
Low-voLTage electrical installations-Part 7-710: Requirements for special installations or places- Medical facilities {译} 低压电气装置-第7-710部分：特殊装置或场所的要求-医疗场所 |
China National Standards LT |
English PDF |
| GB/T 28773-2024 |
Toothed wedge beLTs {译} 齿楔带 |
China National Standards LT |
English PDF |
| GB/T 42707.2-2024 |
Remote operation and maintenance of CNC machine tools-Part 2: FauLT diagnosis and predictive maintenance {译} 数控机床远程运维-第2部分：故障诊断与预测性维护 |
China National Standards LT |
English PDF |
| GB/T 16896.3-2024 |
Instruments and Software for High VoLTage and High Current Tests and Measurements - Part 3: Requirements for Hardware for AC and DC Voltage and Current Tests {译} 高电压和大电流试验测量用仪器和软件-第3部分：对交直流电压和电流试验用硬件的要求 |
China National Standards LT |
English PDF |
| GB/T 44773-2024 |
High-voLTage direct current converter Technical Specifications for Remote Automatic Control (ADC) of DC Power for Flow Stations {译} 高压直流换流站直流功率远方自动控制（ADC）技术规范 |
China National Standards LT |
English PDF |
| GB/Z 44472-2024 |
Instructions for mathematical addition of working voLTage, insulation between circuits and use of PELV in lighting standards {译} 照明标准中工作电压数学加法、电路间绝缘和PELV使用的说明 |
China National Standards LT |
English PDF |
| GB/T 44760-2024 |
ULTrasonic testing method for zirconium and zirconium alloy pipes {译} 锆及锆合金管材超声检测方法 |
China National Standards LT |
English PDF |
| GB/T 44600.2-2024 |
MuLTimedia distribution services based on IPv4/IPv6 - Part 2: Technical requirements for Internet TV content transmission platforms and terminals {译} 基于IPv4/IPv6的多媒体分发业务-第2部分：互联网电视内容传输平台及终端技术要求 |
China National Standards LT |
English PDF |
| GB/T 44659.2-2024 |
Short-circuit current calculation for new energy stations and access systems-Part 2: PhotovoLTaic power generation {译} 新能源场站及接入系统短路电流计算-第2部分：光伏发电 |
China National Standards LT |
English PDF |
| GB/T 44741-2024 |
Determination method for effective arsenic in soil of agricuLTural product production areas {译} 农产品产地土壤有效态砷的测定方法 |
China National Standards LT |
English PDF |
| GB/T 44805.1-2024 |
Digital electrical documentation-Part 1: Interactive fauLT diagnosis manual {译} 数字化电气文件编制-第1部分：交互式故障诊断手册 |
China National Standards LT |
English PDF |
| GB/T 44753-2024 |
Test methods for liquidus temperature of uLTra-thin glass {译} 超薄玻璃液相线温度试验方法 |
China National Standards LT |
English PDF |
| GB/T 5054.2-2024 |
Road vehicles-muLTi-core connecting cables-Part 2: Performance requirements and test methods for high-performance sheathed cables {译} 道路车辆-多芯连接电缆-第2部分：高性能护套电缆的性能要求和试验方法 |
China National Standards LT |
English PDF |
| GB/T 5054.1-2024 |
Road vehicles-muLTi-core connecting cables-Part 1: Performance requirements and test methods for ordinary sheathed cables {译} 道路车辆-多芯连接电缆-第1部分：普通护套电缆的性能要求和试验方法 |
China National Standards LT |
English PDF |
| GB/T 44793-2024 |
Nanotechnology - Nanofiber fiLTer materials for air filtration - Technical requirements {译} 纳米技术-空气过滤用纳米纤维滤材-技术要求 |
China National Standards LT |
English PDF |
| GB/T 44800-2024 |
Technical requirements for working media for heat storage/heat transfer in solar thermal power stations - MoLTen salts {译} 太阳能光热发电站储热/传热用工作介质技术要求-熔融盐 |
China National Standards LT |
English PDF |
| GB/T 22500-2024 |
Animal and vegetable oils and fats - Determination of uLTraviolet absorbance {译} 动植物油脂-紫外吸光度的测定 |
China National Standards LT |
English PDF |
| GB/T 44792-2024 |
HeaLTh management - Information access and data exchange of telemedicine platform {译} 健康管理-远程医疗平台信息接入与数据交换 |
China National Standards LT |
English PDF |
| GB/T 44780-2024 |
HeaLTh management - Health information storage architecture {译} 健康管理-健康信息存储架构 |
China National Standards LT |
English PDF |
| GB/T 5054.3-2024 |
Road vehicles - MuLTicore connecting cables - Part 3: Structure, dimensions and marking of unshielded sheathed low-voltage cables {译} 道路车辆-多芯连接电缆-第3部分：无屏蔽护套低压电缆的结构、尺寸和标记 |
China National Standards LT |
English PDF |
| GB/T 5054.4-2024 |
Road vehicles - MuLTicore connecting cables - Part 4: Test methods and requirements for spiral cable assemblies {译} 道路车辆-多芯连接电缆-第4部分：螺旋电缆总成的试验方法和要求 |
China National Standards LT |
English PDF |
| GB/T 44755-2024 |
Low-pressure high-intensity uLTraviolet lamp {译} 低压高强紫外线灯 |
China National Standards LT |
English PDF |
| GB 14167-2024 |
Motor vehicle seat beLTs and restraint systems installation points {译} 机动车乘员用安全带和约束系统安装固定点 |
China National Standards LT |
English PDF |
| GB 14166-2024 |
Motor vehicle seat beLTs and restraint systems {译} 机动车乘员用安全带和约束系统 |
China National Standards LT |
English PDF |
| GB/T 32151.43-2024 |
Greenhouse gas emission accounting and reporting requirements-Part 43: lead smeLTing enterprises {译} 温室气体排放核算与报告要求-第43部分：铅冶炼企业 |
China National Standards LT |
English PDF |
| GB/T 32151.42-2024 |
Greenhouse gas emission accounting and reporting requirements-Part 42: copper smeLTing enterprises {译} 温室气体排放核算与报告要求-第42部分：铜冶炼企业 |
China National Standards LT |
English PDF |
| GB/T 32151.44-2024 |
Greenhouse gas emission accounting and reporting requirements-Part 44: zinc smeLTing enterprises {译} 温室气体排放核算与报告要求-第44部分：锌冶炼企业 |
China National Standards LT |
English PDF |
| GB/T 26958.29-2024 |
Product Geometric Specification (GPS) - FiLTering - Part 29: Linear Profile Filter - Wavelet {译} 产品几何技术规范（GPS）-滤波-第29部分：线性轮廓滤波器-小波 |
China National Standards LT |
English PDF |
| GB/T 18269-2024 |
Hand tools for live working at voLTage levels of 1-kV AC, 1.5-kV DC and below {译} 交流1-kV、直流1.5-kV及以下电压等级带电作业用手工工具 |
China National Standards LT |
English PDF |
| GB/T 44691-2024 |
Requirements for indoor sports and heaLTh facilities for the elderly {译} 老年人室内运动健康设施要求 |
China National Standards LT |
English PDF |
| GB/T 44603-2024 |
HeaLTh informatics-basic content and data specifications for cardiac arrest investigation {译} 健康信息学-心脏骤停调查基本内容与数据规范 |
China National Standards LT |
English PDF |
| GB/T 44585.1-2024 |
Application of risk management in medical devices connected to IT networks - Part 1: Safety, effectiveness and network security of networked medical devices or heaLTh software in their implementation and use {译} 风险管理在接入IT网络的医疗器械中的应用-第1部分：联网医疗器械或健康软件在其实施和使用中的安全、有效性和网络安全 |
China National Standards LT |
English PDF |
| GB/T 16896.1-2024 |
Instruments and software for high voLTage and high current testing and measurement - Part 1: Requirements for impact testing instruments {译} 高电压和大电流试验测量用仪器和软件-第1部分：对冲击试验用仪器的要求 |
China National Standards LT |
English PDF |
| GB/T 30519-2024 |
Determination of hydrocarbon composition and benzene content in light petroleum fractions and products-MuLTidimensional gas chromatography {译} 轻质石油馏分和产品中烃族组成和苯含量的测定-多维气相色谱法 |
China National Standards LT |
English PDF |
| GB/T 18281.7-2024 |
Sterilization of heaLTh care products-Biological indicators-Part 7: Selection, use and result judgment guide {译} 医疗保健产品灭菌-生物指示物-第7部分：选择、使用和结果判断指南 |
China National Standards LT |
English PDF |
| GB/T 11017.3-2024 |
Power cables with cross-linked polyethylene insulation and accessories for rated voLTages of 66-kV (Um=72.5-kV) and 110-kV (Um=126-kV) - Part 3: Cable accessories {译} 额定电压66-kV（Um=72.5-kV）和110-kV（Um=126-kV）交联聚乙烯绝缘电力电缆及其附件-第3部分：电缆附件 |
China National Standards LT |
English PDF |
| GB/T 11017.2-2024 |
Power cables with cross-linked polyethylene insulation and accessories for rated voLTages of 66-kV (Um=72.5-kV) and 110-kV (Um=126-kV) - Part 2: - Cables {译} 额定电压66-kV（Um=72.5-kV）和110-kV（Um=126-kV）交联聚乙烯绝缘电力电缆及其附件-第2部分:-电缆 |
China National Standards LT |
English PDF |
| GB/T 11017.1-2024 |
Power cables with cross-linked polyethylene insulation and accessories for rated voLTages of 66-kV (Um=72.5-kV) and 110-kV (Um=126-kV) - Part 1: Test methods and requirements {译} 额定电压66-kV（Um=72.5-kV）和110-kV（Um=126-kV）交联聚乙烯绝缘电力电缆及其附件-第1部分：试验方法和要求 |
China National Standards LT |
English PDF |
| GB/T 1984-2024 |
High-voLTage AC circuit breakers {译} 高压交流断路器 |
China National Standards LT |
English PDF |
| GB/T 44600.1-2024 |
Based on IPv4/IPv6 MuLTimedia distribution services - Part 1: Technical requirements for IPTV content transmission platforms and terminals {译} 基于IPv4/IPv6的多媒体分发业务-第1部分：IPTV内容传输平台及终端技术要求 |
China National Standards LT |
English PDF |
| GB/T 44598-2024 |
Overall technical requirements for muLTi-domain IPv6 single-stack networks {译} 多域IPv6单栈网络总体技术要求 |
China National Standards LT |
English PDF |
| GB/T 28267.3-2024 |
Wire rope conveyor beLTs - Part 3: Special safety requirements for conveyor belts for underground use {译} 钢丝绳芯输送带-第3部分：井下用输送带的特殊安全要求 |
China National Standards LT |
English PDF |
| GB/T 44525-2024 |
Non-destructive testing - ULTrasonic testing - Specifications for comparison test blocks of resin-based composite materials {译} 无损检测-超声检测-树脂基复合材料制件对比试块规范 |
China National Standards LT |
English PDF |
| GB/T 1231-2024 |
High-strength large hexagonal boLT connection for steel structures {译} 钢结构用高强度大六角头螺栓连接副 |
China National Standards LT |
English PDF |
| GB/T 33757.2-2024 |
Energy saving rate of distributed cooling, heating and power energy systems - Part 2: MuLTi-energy complementary drive systems {译} 分布式冷热电能源系统的节能率-第2部分：多能源互补驱动系统 |
China National Standards LT |
English PDF |
| GB/T 22838.7-2024 |
Determination of physical properties of cigarettes and fiLTer rods - Part 7: Cigarette dust content {译} 卷烟和滤棒物理性能的测定-第7部分：卷烟含末率 |
China National Standards LT |
English PDF |
| GB/T 22838.6-2024 |
Determination of physical properties of cigarettes and fiLTer rods - Part 6: Hardness {译} 卷烟和滤棒物理性能的测定-第6部分：硬度 |
China National Standards LT |
English PDF |
| GB/T 22838.5-2024 |
Determination of physical properties of cigarettes and fiLTer rods - Part 5: Cigarette draw resistance and filter rod pressure drop {译} 卷烟和滤棒物理性能的测定-第5部分：卷烟吸阻和滤棒压降 |
China National Standards LT |
English PDF |
| GB/T 44512-2024 |
Inspection and testing of large-scale amusement facilities-ULTrasonic stress test {译} 大型游乐设施检验检测-超声应力测试 |
China National Standards LT |
English PDF |
| GB/T 44586.1-2024 |
In vitro diagnostic medical devices-MuLTiple nucleic acid molecular detection-Part 1: Nucleic acid quality evaluation terms and general requirements {译} 体外诊断医疗器械-多重核酸分子检测-第1部分：核酸质量评价术语和通用要求 |
China National Standards LT |
English PDF |
| GB/T 44615-2024 |
Detection method for volatile organic compounds in soil of agricuLTural product production areas-Dual column gas chromatography {译} 农产品产地土壤中挥发性有机物检测方法-双柱气相色谱法 |
China National Standards LT |
English PDF |
| GB/T 44650-2024 |
Hardware-in-the-loop test procedures for grid-connected performance of inverters in photovoLTaic power stations {译} 光伏发电站逆变器并网性能硬件在环测试规程 |
China National Standards LT |
English PDF |
| GB/T 44436-2024 |
Laboratory testing and calibration methods for soft X-ray - extreme uLTraviolet band space imaging instruments {译} 软X射线-极紫外波段空间成像仪器实验室检测与定标方法 |
China National Standards LT |
English PDF |
| GB/T 44662-2024 |
HeaLTh management - Data collection and transmission protocol for terminal equipment {译} 健康管理-终端设备数据采集与传输协议 |
China National Standards LT |
English PDF |
| GB/T 6402-2024 |
ULTrasonic testing method for steel forgings {译} 钢锻件超声检测方法 |
China National Standards LT |
English PDF |
| GB/T 44611-2024 |
Procedure for detection of pests in cuLTivation media {译} 栽培介质有害生物检测规程 |
China National Standards LT |
English PDF |
| GB/T 2428-2024 |
AduLT head and face dimensions {译} 成年人头面部尺寸 |
China National Standards LT |
English PDF |
| GB/T 44482-2024 |
Chemicals - MuLTi-generation reproduction toxicity test of thermophilic Tetrahymena {译} 化学品-嗜热四膜虫多代繁殖毒性试验 |
China National Standards LT |
English PDF |
| GB/T 33290.31-2024 |
Specifications for the review of cuLTural relics out of the country - Part 31: jewelry {译} 文物出境审核规范-第31部分：首饰 |
China National Standards LT |
English PDF |
| GB/T 33290.30-2024 |
Specifications for the review of cuLTural relics out of the country - Part 30: vehicles, ships, sedan chairs {译} 文物出境审核规范-第30部分：车船舆轿 |
China National Standards LT |
English PDF |
| GB/T 33290.29-2024 |
Specifications for the review of cuLTural relics out of the country - Part 29: vehicle and horse gear {译} 文物出境审核规范-第29部分：车具马具 |
China National Standards LT |
English PDF |
| GB/T 33290.28-2024 |
Specifications for the review of cuLTural relics out of the country - Part 28: accessories {译} 文物出境审核规范-第28部分：佩饰 |
China National Standards LT |
English PDF |
| GB/T 33290.27-2024 |
Specifications for the review of cuLTural relics out of the country - Part 27: oil paintings, watercolors, gouache paintings {译} 文物出境审核规范-第27部分：油画、水彩画、水粉画 |
China National Standards LT |
English PDF |
| GB/T 33290.26-2024 |
Specifications for the review of cuLTural relics out of the country - Part 26: murals {译} 文物出境审核规范-第26部分：壁画 |
China National Standards LT |
English PDF |
| GB/T 33290.25-2024 |
Review of cuLTural relics leaving the country Specifications - Part 25: Chinese paintings and calligraphy {译} 文物出境审核规范-第25部分：中国画及书法 |
China National Standards LT |
English PDF |
| GB/T 33290.24-2024 |
Regulations for the review of cuLTural relics leaving the country - Part 24: Enamelware {译} 文物出境审核规范-第24部分：珐琅器 |
China National Standards LT |
English PDF |
| GB/T 33290.23-2024 |
Regulations for the review of cuLTural relics leaving the country - Part 23: Glassware {译} 文物出境审核规范-第23部分：玻璃器 |
China National Standards LT |
English PDF |
| GB/T 33290.22-2024 |
Regulations for the review of cuLTural relics leaving the country - Part 22: Jade and stoneware {译} 文物出境审核规范-第22部分：玉石器 |
China National Standards LT |
English PDF |
| GB/T 33290.21-2024 |
Regulations for the review of cuLTural relics leaving the country - Part 21: Relics of ethnic minority celebrities {译} 文物出境审核规范-第21部分：少数民族名人遗物 |
China National Standards LT |
English PDF |
| GB/T 33290.20-2024 |
Regulations for the review of cuLTural relics leaving the country - Part 20: Articles for religious sacrifices and ritual activities of ethnic minorities {译} 文物出境审核规范-第20部分：少数民族宗教祭祀和礼仪活动用品 |
China National Standards LT |
English PDF |
| GB/T 33290.19-2024 |
Regulations for the review of cuLTural relics leaving the country - Part 19: Physical materials of minority buildings {译} 文物出境审核规范-第19部分：少数民族建筑物实物资料 |
China National Standards LT |
English PDF |
| GB/T 33290.18-2024 |
Regulations for the review of cuLTural relics leaving the country - Part 18: Minority costumes {译} 文物出境审核规范-第18部分：少数民族服饰 |
China National Standards LT |
English PDF |
| GB/T 44591-2024 |
AgricuLTural social services - Community fresh food store service specifications {译} 农业社会化服务-社区生鲜店服务规范 |
China National Standards LT |
English PDF |
| GB/T 20730.1-2024 |
Analog input two-digit or muLTi-digit output instruments for industrial process control systems - Part 1: Performance evaluation methods {译} 工业过程控制系统用模拟输入两位或多位输出仪表-第1部分：性能评定方法 |
China National Standards LT |
English PDF |
| GB/T 32151.22-2024 |
Greenhouse gas emission accounting and reporting requirements - Part 22: Livestock and pouLTry breeding enterprises {译} 温室气体排放核算与报告要求-第22部分：畜禽养殖企业 |
China National Standards LT |
English PDF |
| GB 30254-2024 |
Energy efficiency limits and energy efficiency grades for high-voLTage three-phase cage-type asynchronous motors {译} 高压三相笼型异步电动机能效限定值及能效等级 |
China National Standards LT |
English PDF |
| GB 44498-2024 |
Household and similar electrical appliances-HeaLTh technical specifications {译} 家用和类似用途电器-健康技术规范 |
China National Standards LT |
English PDF |
| GB/T 2423.65-2024 |
Environmental testing - Part 2: Test methods - Test: saLT spray/temperature/humidity/solar radiation combination {译} 环境试验-第2部分：试验方法-试验：盐雾/温度/湿度/太阳辐射综合 |
China National Standards LT |
English PDF |
| GB/T 2423.17-2024 |
Environmental testing - Part 2: Test methods - Test Ka: SaLT spray {译} 环境试验-第2部分：试验方法-试验Ka：盐雾 |
China National Standards LT |
English PDF |
| GB/T 5590-2024 |
Explosion-proof low-voLTage electromagnetic starter for mining {译} 矿用防爆低压电磁起动器 |
China National Standards LT |
English PDF |
| GB/T 44362-2024 |
Nondestructive testing of welds - ULTrasonic testing - Automatic total focusing technology (TFM) {译} 焊缝无损检测-超声检测-自动全聚焦技术（TFM） |
China National Standards LT |
English PDF |
| GB/Z 44235-2024 |
Nanotechnology - Characteristics and measurement methods of air fiLTer media containing polymer nanofibers {译} 纳米技术-含聚合物纳米纤维的空气过滤介质特性及测量方法 |
China National Standards LT |
English PDF |
| GB/T 44430-2024 |
Container muLTimodal transport waybills {译} 集装箱多式联运运单 |
China National Standards LT |
English PDF |
| GB/T 44264-2024 |
General technical conditions for photovoLTaic module cleaning robots {译} 光伏组件清洁机器人通用技术条件 |
China National Standards LT |
English PDF |
| GB/T 34370.12-2024 |
Nondestructive testing of amusement facilities-Part 12: BoLT phased array ultrasonic testing {译} 游乐设施无损检测-第12部分：螺栓相控阵超声检测 |
China National Standards LT |
English PDF |
| GB/T 44357-2024 |
Test methods for performance grade evaluation of petroleum asphaLT {译} 石油沥青性能等级评价试验方法 |
China National Standards LT |
English PDF |
| GB/T 44408-2024 |
Smart city-smart muLTifunctional pole system-functional requirements {译} 智慧城市-智慧多功能杆系统-功能要求 |
China National Standards LT |
English PDF |
| GB/T 44229-2024 |
Basic requirements for community service systems in major public heaLTh emergencies based on cloud computing Request {译} 基于云计算的重大突发公众卫生事件中社区服务系统基本要求 |
China National Standards LT |
English PDF |
| GB/T 44461.2-2024 |
Intelligent networked vehicles - Technical requirements and test methods for combined driver assistance systems - Part 2: MuLTi-lane driving control {译} 智能网联汽车-组合驾驶辅助系统技术要求及试验方法-第2部分：多车道行驶控制 |
China National Standards LT |
English PDF |
| GB/T 44384-2024 |
Human-system interaction ergonomics - HeaLThy home design guidelines {译} 人-系统交互工效学-健康家居设计导则 |
China National Standards LT |
English PDF |
| GB/T 44441-2024 |
Visual heaLTh and comfort test for LED lighting products {译} LED照明产品视觉健康舒适度测试 |
China National Standards LT |
English PDF |
| GB/T 44292-2024 |
Test for electrostatic discharge sensitivity of bypass diodes for photovoLTaic modules {译} 光伏组件用旁路二极管静电放电敏感度测试 |
China National Standards LT |
English PDF |
| GB/T 44232-2024 |
Technical specifications for battery charge and discharge controllers for stand-alone photovoLTaic systems {译} 独立光伏系统用蓄电池充放电控制器技术规范 |
China National Standards LT |
English PDF |
| GB/T 29320-2024 |
Technical requirements for solar tracking systems for photovoLTaic power stations {译} 光伏电站太阳跟踪系统技术要求 |
China National Standards LT |
English PDF |
| GB/T 44295-2024 |
Epoxy E-glass cloth adhesive sheets for muLTilayer printed circuit boards {译} 多层印制板用环氧E玻纤布粘结片 |
China National Standards LT |
English PDF |
| GB/T 44447-2024 |
Green product evaluation - Printers and muLTifunction machines {译} 绿色产品评价-打印机及多功能一体机 |
China National Standards LT |
English PDF |
| GB/T 44419-2024 |
Basic technical terms for protection of cuLTural relics in museums {译} 馆藏文物保护技术基础术语 |
China National Standards LT |
English PDF |
| GB/T 44420-2024 |
Rapid determination of moisture content of bamboo and wooden cuLTural relics in museums {译} 馆藏竹木器文物含水率快速测定 |
China National Standards LT |
English PDF |
| GB/T 16895.36-2024 |
Low-voLTage electrical devices - Part 7-722: Requirements for special devices or places - Electric vehicle power supply {译} 低压电气装置-第7-722-部分：特殊装置或场所的要求-电动车供电 |
China National Standards LT |
English PDF |
| GB/T 4706.120-2024 |
Safety of household and similar electrical appliances - Part 120: Special requirements for uLTraviolet radiation water treatment equipment {译} 家用和类似用途电器的安全-第120部分：紫外线辐射水处理器具的特殊要求 |
China National Standards LT |
English PDF |
| GB/T 44252.1-2024 |
Internet of Things-Sports heaLTh monitoring equipment-Part 1: Data classification and description {译} 物联网-运动健康监测设备-第1部分：数据分类和描述 |
China National Standards LT |
English PDF |
| GB/T 18216.7-2024 |
Electrical safety of low-voLTage distribution systems of AC 1000V and DC 1500V and below-Test, measurement or monitoring equipment for protective measures-Part 7: Phase sequence {译} 交流1000V和直流1500V及以下低压配电系统电气安全-防护措施的试验、测量或监控设备-第7部分：相序 |
China National Standards LT |
English PDF |
| GB/T 44228.1-2024 |
Smart photovoLTaic power station-Part 1: General {译} 智能光伏发电站-第1部分：总则 |
China National Standards LT |
English PDF |
| GB/T 44179-2024 |
Hollow post composite insulators for substations with AC voLTage higher than 1000-V and DC voltage higher than 1500-V- Definitions, test methods and acceptance criteria {译} 交流电压高于1000-V和直流电压高于1500-V的变电站用空心支柱复合绝缘子-定义、试验方法和接收准则 |
China National Standards LT |
English PDF |
| GB/T 44195-2024 |
LTE mobile communications Test methods for terminals supporting Beidou positioning {译} LTE移动通信终端支持北斗定位的测试方法 |
China National Standards LT |
English PDF |
| GB/T 44201-2024 |
ULTra-thin glass cutting machines {译} 超薄玻璃切割机 |
China National Standards LT |
English PDF |
| GB/T 23862-2024 |
Specifications for packaging and transportation of cuLTural relics {译} 文物包装与运输规范 |
China National Standards LT |
English PDF |
| GB/T 30306-2024 |
FiLTer cartridges for drinking water treatment for household and similar purposes {译} 家用和类似用途饮用水处理滤芯 |
China National Standards LT |
English PDF |
| GB/T 4706.40-2024 |
Safety of household and similar electrical appliances - Part 40: Particular requirements for commercial muLTi-purpose electric cooking pots {译} 家用和类似用途电器的安全-第40部分：商用多用途电平锅的特殊要求 |
China National Standards LT |
English PDF |
| GB/T 4706.100-2024 |
Safety of household and similar electrical appliances - Part 100: Particular requirements for muLTi-function shower cubicles {译} 家用和类似用途电器的安全-第100部分：多功能淋浴房的特殊要求 |
China National Standards LT |
English PDF |
| GB/T 44206-2024 |
Specifications for the construction of a database of diseases of cuLTural relics in collections {译} 馆藏文物病害数据库建设规范 |
China National Standards LT |
English PDF |
| GB/T 44208-2024 |
Basic elements for description and illustration of diseases of cuLTural relics in collections {译} 馆藏文物病害描述及图示基础要素 |
China National Standards LT |
English PDF |
| GB/T 44203-2024 |
Management specifications for scientific and technological archives of cuLTural relics {译} 文物科学技术档案管理规范 |
China National Standards LT |
English PDF |
| GB/T 44152-2024 |
ULTrasonic testing methods for seamless steel pipe ends {译} 无缝钢管管端超声检测方法 |
China National Standards LT |
English PDF |
| GB/T 44150-2024 |
Metallic and other inorganic coatings-Zinc and nickel, cobaLT or iron alloy electroplating layers {译} 金属及其他无机覆盖层-锌与镍、钴或铁合金电镀层 |
China National Standards LT |
English PDF |
| GB/T 43723-2024 |
Performance requirements for semi-integrated LED lamps with a power supply voLTage not greater than 50V AC effective value or 120V DC without ripple for general lighting {译} 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯-性能要求 |
China National Standards LT |
English PDF |
| GB/T 39560.12-2024 |
Determination of certain substances in electronic and electrical products-Part 12: SimuLTaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry {译} 电子电气产品中某些物质的测定-第12部分：气相色谱-质谱法同时测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯 |
China National Standards LT |
English PDF |
| GB/T 30894-2024 |
SaLTed fish {译} 咸鱼 |
China National Standards LT |
English PDF |
| GB/T 27988-2024 |
Technical specifications for saLTed fish processing {译} 咸鱼加工技术规范 |
China National Standards LT |
English PDF |
| GB/T 4585-2024 |
Artificial pollution test for high voLTage porcelain and glass insulators for AC systems {译} 交流系统用高压瓷和玻璃绝缘子的人工污秽试验 |
China National Standards LT |
English PDF |
| GB/T 18802.12-2024 |
Low-voLTage surge protective devices (SPDs)-Part 12: Surge protective devices for low-voltage power supply systems-Guidelines for selection and use {译} 低压电涌保护器（SPD）-第12部分：低压电源系统的电涌保护器-选择和使用导则 |
China National Standards LT |
English PDF |
| GB/T 28182-2024 |
Rated voLTage 52-kV and below with series gap arresters {译} 额定电压52-kV及以下带串联间隙避雷器 |
China National Standards LT |
English PDF |
| GB/T 14048.9-2024 |
Low-voLTage switchgear and control equipment-Part 6-2: Multifunctional electrical appliances-Control and protection switchgear (equipment) (CPS) {译} 低压开关设备和控制设备-第6-2部分:多功能电器-控制与保护开关电器（设备）（CPS） |
China National Standards LT |
English PDF |
| GB/Z 43996.1-2024 |
Fine bubble technology-AgricuLTural application-Part 1: Test method for evaluating the growth promotion effect of hydroponic lettuce {译} 微细气泡技术-农业应用-第1部分：评价水培生菜生长促进作用的测试方法 |
China National Standards LT |
English PDF |
| GB/T 33475.6-2024 |
Information technology - High-efficiency muLTimedia coding - Part 6: Intelligent media transmission {译} 信息技术-高效多媒体编码-第6部分：智能媒体传输 |
China National Standards LT |
English PDF |
| GB/T 33475.2-2024 |
Information technology - High-efficiency muLTimedia coding - Part 2: Video {译} 信息技术-高效多媒体编码-第2部分：视频 |
China National Standards LT |
English PDF |
| GB/T 44051-2024 |
Non-destructive testing of welds-Phase-controlled array uLTrasonic testing of thin-walled steel components-Acceptance levels {译} 焊缝无损检测-薄壁钢构件相控阵超声检测-验收等级 |
China National Standards LT |
English PDF |
| GB/T 35717-2024 |
Measurement of flow rates of turbines, storage pumps and pump-turbines-ULTrasonic propagation time method {译} 水轮机、蓄能泵和水泵水轮机流量的测量-超声传播时间法 |
China National Standards LT |
English PDF |
| GB/T 44052-2024 |
Hydraulic transmission-FiLTers-Identification of performance characteristics {译} 液压传动-过滤器-性能特性的标识 |
China National Standards LT |
English PDF |
| GB/T 44114-2024 |
Operation control specifications for electrochemical energy storage systems connected to low-voLTage distribution networks {译} 电化学储能系统接入低压配电网运行控制规范 |
China National Standards LT |
English PDF |
| GB/Z 44074-2024 |
Low-voLTage switchgear and control equipment and complete sets of equipment-environmental factors {译} 低压开关设备和控制设备及其成套设备-环境因素 |
China National Standards LT |
English PDF |
| GB/T 24194-2024 |
Ferrosilicon - Determination of muLTi-element content - Inductively coupled plasma atomic emission spectrometry {译} 硅铁-多元素含量的测定-电感耦合等离子体原子发射光谱法 |
China National Standards LT |
English PDF |
| GB/T 33348-2024 |
VoLTage source converter valves for high-voltage direct current transmission - Electrical tests {译} 高压直流输电用电压源换流器阀-电气试验 |
China National Standards LT |
English PDF |
| GB/T 44082-2024 |
Road vehicles - Connection devices between muLTiple vehicles of automobile trains - Strength requirements {译} 道路车辆-汽车列车多车辆间连接装置-强度要求 |
China National Standards LT |
English PDF |
| GB/T 44083.2-2024 |
Road vehicles - Methods and rules for evaluating the usability of child restraint systems and their installation in vehicle fixing systems - Part 2: Child restraint systems fixed with vehicle seat beLTs {译} 道路车辆-儿童约束系统以及与车辆固定系统配装的使用性评价方法和规则-第2部分：用车辆安全带固定儿童约束系统 |
China National Standards LT |
English PDF |
| GB/T 26764-2024 |
MuLTi-function road condition rapid detection equipment {译} 多功能路况快速检测设备 |
China National Standards LT |
English PDF |
| GB/T 44040-2024 |
Measurement methods for external noise of heavy-duty vehicles in muLTi-operating conditions {译} 重型汽车多工况行驶车外噪声测量方法 |
China National Standards LT |
English PDF |
| GB/T 44081-2024 |
Bypass diode thermal runaway test for photovoLTaic modules {译} 光伏组件用旁路二极管热失控测试 |
China National Standards LT |
English PDF |
| GB/T 44068-2024 |
LTE mobile Technical requirements for communication terminals supporting Beidou positioning {译} LTE移动通信终端支持北斗定位的技术要求 |
China National Standards LT |
English PDF |
| GB/T 18802.331-2024 |
Low voLTage surge protector components - Part 331: Performance requirements and test methods for metal oxide varistors (MOVs) {译} 低压电涌保护器元件-第331部分：金属氧化物压敏电阻（MOV）的性能要求和试验方法 |
China National Standards LT |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
