Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 24820-2024 |
General technical conditions for Laboratory furniture {译} 实验室家具通用技术条件 |
China National Standards Laboratory |
 English PDF |
| GB/T 34877.4-2024 |
Industrial fans-Determination of sound power level of fans under standard Laboratory conditions-Part 4: Sound intensity method {译} 工业风机-标准实验室条件下风机声功率级的测定-第4部分：声强法 |
China National Standards Laboratory |
English PDF |
| GB/T 43905.1-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 1: Determination of emission rates of fumes from arc welding and collection of fumes for analysis {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第1部分：电弧焊中烟尘排放速率的测定和分析用烟尘的收集 |
China National Standards Laboratory |
English PDF |
| GB/T 43905.2-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 2: Determination of emission rates of carbon monoxide, carbon dioxide, nitric oxide and nitrogen dioxide during arc welding, cutting and gouging {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第2部分：电弧焊、切割及气刨中一氧化碳、二氧化碳、一氧化氮、二氧化氮排放速率的测定 |
China National Standards Laboratory |
English PDF |
| GB/T 43905.3-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 3: Determination of ozone emission rate during arc welding {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第3部分：电弧焊中臭氧排放速率的测定 |
China National Standards Laboratory |
English PDF |
| GB/T 43905.4-2024 |
Laboratory methods for sampling fumes and gases for welding and related processes - Part 4: Emission limits of welding fumes from welding materials {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第4部分：焊接材料焊接烟尘排放限值 |
China National Standards Laboratory |
English PDF |
| GB/T 43905.5-2024 |
Laboratory methods for sampling fumes and gases in welding and related processes - Part 5: Based on pyrolysis-gas chromatography-mass spectrometry Identification of thermal degradation products of organic materials in welding or cutting by the method {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第5部分：基于热解-气相色谱-质谱法的焊接或切割中有机材料热降解物的识别 |
China National Standards Laboratory |
English PDF |
| GB/T 43905.6-2024 |
Laboratory methods for sampling fumes and gases in welding and related processes - Part 6: Quantitative determination of fumes and gases in resistance spot welding {译} 焊接及相关工艺中烟尘和气体取样的实验室方法-第6部分：电阻点焊中烟尘和气体的定量化测定 |
China National Standards Laboratory |
English PDF |
| GB/T 43635-2024 |
Forensic science-DNA Laboratory construction specification {译} 法庭科学-DNA实验室检验规范 |
China National Standards Laboratory |
English PDF |
| GB/T 17737.113-2024 |
Forensic science-DNA Laboratory inspection specification {译} 同轴通信电缆-第1-113部分：-电气试验方法-衰减常数试验 |
China National Standards Laboratory |
English PDF |
| GB/T 43576-2023 |
Oral hygiene and care products. Laboratory test method for the effectiveness of toothpaste in removing exogenous stains. {译} 口腔清洁护理用品 牙膏对去除外源性色斑效果的实验室测试方法 |
China National Standards Laboratory |
English PDF |
| GB/T 43547-2023 |
Good Laboratory Practice (GLP) management, description and use of test items {译} 良好实验室规范(GLP) 管理、描述和测试项目的使用 |
China National Standards Laboratory |
English PDF |
| GB/T 43544-2023 |
Oral cleaning and care products Laboratory test method for the inhibition rate of toothpaste on dental calculus {译} 口腔清洁护理用品 牙膏对牙结石抑制率的实验室测试方法 |
China National Standards Laboratory |
English PDF |
| GB/T 34877.2-2023 |
Industrial fans - Determination of fan sound power levels under standard Laboratory conditions - Part 2: Reverberation chamber method {译} 工业风机 标准实验室条件下风机声功率级的测定 第2部分：混响室法 |
China National Standards Laboratory |
English PDF |
| GB/T 34877.1-2023 |
Industrial fans - Determination of fan sound power levels under standard Laboratory conditions - Part 1: General requirements {译} 工业风机 标准实验室条件下风机声功率级的测定 第1部分：通用要求 |
China National Standards Laboratory |
English PDF |
| GB 14925-2023 |
Laboratory animal environment and facilities {译} 实验动物 环境及设施 |
China National Standards Laboratory |
English PDF |
| GB/Z 43280-2023 |
Medical Laboratory Measurement Uncertainty Assessment Guide {译} 医学实验室 测量不确定度评定指南 |
China National Standards Laboratory |
English PDF |
| GB/T 43289-2023 |
Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under Laboratory conditions. {译} 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 43449-2023 |
Forensic Science Toxicology Laboratory Quality Control Practices {译} 法庭科学 毒物分析实验室质量控制规范 |
China National Standards Laboratory |
English PDF |
| GB/T 43278-2023 |
Medical Laboratory Risk Management Application in Medical Laboratory {译} 医学实验室 风险管理在医学实验室的应用 |
China National Standards Laboratory |
English PDF |
| GB/T 8419-2023 |
Earthmoving Machinery Laboratory Evaluation of Driver's Seat Vibration {译} 土方机械 司机座椅振动的实验室评价 |
China National Standards Laboratory |
English PDF |
| GB/T 43051-2023 |
Laboratory animals General requirements for biosafety in animal experiments {译} 实验动物 动物实验生物安全通用要求 |
China National Standards Laboratory |
English PDF |
| GB/T 18950-2023 |
Rubber and plastic hoses. Laboratory test methods for exposure to light sources. Determination of changes in color, appearance and other physical properties. {译} 橡胶和塑料软管 实验室光源暴露试验法 颜色、外观和其他物理性能变化的测定 |
China National Standards Laboratory |
English PDF |
| GB/T 22362-2023 |
Laboratory glassware flask {译} 实验室玻璃仪器 烧瓶 |
China National Standards Laboratory |
English PDF |
| GB/T 42764-2023 |
Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under Laboratory mesophilic conditions - Test methods and requirements {译} 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 |
China National Standards Laboratory |
English PDF |
| GB/T 42552.1-2023 |
Acoustics - Laboratory method for measuring impact sound improvement of cladding with small slab modules - Part 1: Heavy dense slabs {译} 声学 小楼板模块测量覆面层撞击声改善量的实验室方法 第1部分：重质密实楼板 |
China National Standards Laboratory |
English PDF |
| GB/Z 42520-2023 |
Laboratory Manual for X-ray Fluorescence Spectroscopy Analysis of Iron Ore {译} 铁矿石X射线荧光光谱分析实验室操作指南 |
China National Standards Laboratory |
English PDF |
| GB/T 42580-2023 |
Intelligent Laboratory Microbial Mass Spectrometry Identification Platform {译} 智能实验室 微生物质谱鉴定平台 |
China National Standards Laboratory |
English PDF |
| GB/T 42549-2023 |
Specifications for Safety Management of Marine Survey Ship Laboratory {译} 海洋调查船舶实验室安全管理规范 |
China National Standards Laboratory |
English PDF |
| GB/T 42125.14-2023 |
Safety requirements for electrical equipment for measurement, control and Laboratory use - Part 14: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes {译} 测量、控制和实验室用电气设备的安全要求 第14部分：实验室用分析和其他目的自动和半自动设备的特殊要求 |
China National Standards Laboratory |
English PDF |
| GB/T 41639-2022 |
Plastics Determination of disintegration rate of plastic materials under Laboratory-scale simulated composting conditions {译} 塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定 |
China National Standards Laboratory |
English PDF |
| GB/T 16422.4-2022 |
Plastics - Laboratory light source exposure test methods - Part 4: open carbon arc lamps {译} 塑料 实验室光源暴露试验方法 第4部分：开放式碳弧灯 |
China National Standards Laboratory |
English PDF |
| GB/T 16422.3-2022 |
Plastics - Laboratory light source exposure test methods - Part 3: fluorescent ultraviolet lamps {译} 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 |
China National Standards Laboratory |
English PDF |
| GB/T 16422.2-2022 |
Plastics - Laboratory light source exposure test methods - Part 2: Xenon arc lamps {译} 塑料 实验室光源暴露试验方法 第2部分：氙弧灯 |
China National Standards Laboratory |
English PDF |
| GB/T 42218-2022 |
Laboratory medicine - In vitro diagnostic medical devices - Manufacturer's confirmation of quality control procedures provided to users {译} 检验医学 体外诊断医疗器械 制造商对提供给用户的质量控制程序的确认 |
China National Standards Laboratory |
English PDF |
| GB/T 41962-2022 |
Technical specifications for Laboratory waste storage devices {译} 实验室废弃物存储装置技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 42266-2022 |
Flexible porous polymeric materials - Laboratory evaluation of the combustion characteristics of small specimens in the horizontal direction under a small flame {译} 柔性多孔聚合物材料 小试样在小火焰下水平方向燃烧特性的实验室评估 |
China National Standards Laboratory |
English PDF |
| GB/T 27476.7-2022 |
Testing Laboratory safety - Part 7: Ergonomic factors {译} 检测实验室安全 第7部分：工效学因素 |
China National Standards Laboratory |
English PDF |
| GB/T 42011-2022 |
Laboratory Animals General Welfare {译} 实验动物 福利通则 |
China National Standards Laboratory |
English PDF |
| GB 14923-2022 |
Laboratory animals Genetic quality control {译} 实验动物 遗传质量控制 |
China National Standards Laboratory |
English PDF |
| GB/T 42125.19-2022 |
Safety requirements for electrical equipment for measurement, control and Laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves {译} 测量、控制和实验室用电气设备的安全要求 第19部分：电动控制阀门执行器的特殊要求 |
China National Standards Laboratory |
English PDF |
| GB/T 21919-2022 |
Laboratory medicine - Competence requirements for calibration laboratories operating reference measurement procedures {译} 检验医学 运行参考测量程序的校准实验室的能力要求 |
China National Standards Laboratory |
English PDF |
| GB/T 42125.10-2022 |
Safety requirements for electrical equipment for measurement, control and Laboratory use - Part 10: Particular requirements for insulation resistance measurement and dielectric strength test equipment {译} 测量、控制和实验室用电气设备的安全要求 第10部分：绝缘电阻测量和介电强度试验设备的特殊要求 |
China National Standards Laboratory |
English PDF |
| GB/T 42020-2022 |
Specifications for measurement of Laboratory power supply characteristics {译} 实验室电源特性的测量规范 |
China National Standards Laboratory |
English PDF |
| GB/T 18268.32-2022 |
Electrical equipment for measurement, control and Laboratory use - Electromagnetic compatibility requirements - Part 32: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) - Indu {译} 测量、控制和实验室用的电设备 电磁兼容性要求 第32部分：安全相关系统和预期执行安全相关功能（功能安全）设备的抗扰度要求 特定电磁环境的工业应用 |
China National Standards Laboratory |
English PDF |
| GB/T 18268.31-2022 |
Electrical equipment for measurement, control and Laboratory use - Electromagnetic compatibility requirements - Part 31: Immunity requirements for safety-related systems and equipment intended to perform safety-related functions (functional safety) Genera {译} 测量、控制和实验室用的电设备 电磁兼容性要求 第31部分：安全相关系统和预期执行安全相关功能（功能安全）设备的抗扰度要求 一般工业应用 |
China National Standards Laboratory |
English PDF |
| GB/T 36917.4-2022 |
Dentistry - Laboratory cutting tools - Part 4: Microtungsten carbide cutting tools for laboratory use {译} 牙科学 技工室用刃具 第4部分：技工室用微型硬质合金刃具 |
China National Standards Laboratory |
English PDF |
| GB/T 36917.3-2022 |
Dentistry - Laboratory cutting tools - Part 3: Carbide cutting tools for milling machines {译} 牙科学 技工室用刃具 第3部分：铣床用硬质合金刃具 |
China National Standards Laboratory |
English PDF |
| GB/Z 27429-2022 |
Guidelines for Uncertainty Assessment of Laboratory Scientific Data {译} 实验室科研数据不确定性评估指南 |
China National Standards Laboratory |
English PDF |
| GB/Z 27427-2022 |
Laboratory Equipment Management Guide {译} 实验室仪器设备管理指南 |
China National Standards Laboratory |
English PDF |
| GB/Z 27426-2022 |
Guidelines for monitoring the validity of chemical analysis Laboratory results {译} 化学分析实验室结果有效性监控指南 |
China National Standards Laboratory |
English PDF |
| GB/T 40343-2021 |
Intelligent Laboratory—Information management system—Functional requirements 智能实验室 信息管理系统 功能要求 |
China National Standards Laboratory |
English PDF |
| GB/T 40326-2021 |
Energy efficiency grades for Laboratory equipment—Drug stability test chambers 实验室设备能效等级 药品稳定性试验箱 |
China National Standards Laboratory |
English PDF |
| GB/T 15596-2021 |
Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or Laboratory radiation sources 塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定 |
China National Standards Laboratory |
English PDF |
| GB/T 12810-2021 |
Laboratory glassware—Capacity methods testing and use of volumetric instruments 实验室玻璃仪器 玻璃量器的容量校准和使用方法 |
China National Standards Laboratory |
English PDF |
| GB/T 40378-2021 |
Technical specification of treatment equipments for chemistry Laboratory waste water 化学实验室废水处理装置技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 40168-2021 |
Corrugating medium—Determination of the edge crush resistance after Laboratory fluting 瓦楞芯纸 实验室起楞后边压强度的测定 |
China National Standards Laboratory |
English PDF |
| GB/T 40149-2021 |
Construction specifications of credit files for employees of inspection body and Laboratory 检验检测机构从业人员信用档案建设规范 |
China National Standards Laboratory |
English PDF |
| GB/T 12807-2021 |
Laboratory glassware-Graduated pipettes 实验室玻璃仪器 分度吸量管 |
China National Standards Laboratory |
English PDF |
| GB/T 40024-2021 |
Laboratory instruments and equipment—Taxonomy 实验室仪器及设备 分类方法 |
China National Standards Laboratory |
English PDF |
| GB/T 39663-2021 |
Compilation specifications of integrity report for inspection body and Laboratory 检验检测机构诚信报告编制规范 |
China National Standards Laboratory |
English PDF |
| GB/T 31016-2021 |
General technical specification for mobile Laboratory of sample collection and treatment 样品采集与处理移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 39760-2021 |
Laboratory animal-Guidelines for euthanasia 实验动物 安乐死指南 |
China National Standards Laboratory |
English PDF |
| GB/T 39759-2021 |
Laboratory animal—Terminology 实验动物 术语 |
China National Standards Laboratory |
English PDF |
| GB/T 31723.413-2021 |
Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(Laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分：电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 |
China National Standards Laboratory |
English PDF |
| GB/T 40672-2021 |
Clinical Laboratory testing—Criteria for acceptable lots of dehydrated Mueller-Hinton agar and broth for antimicrobial susceptibility testing 临床实验室检验 抗菌剂敏感试验脱水MH琼脂和肉汤可接受批标准 |
China National Standards Laboratory |
English PDF |
| GB/Z 39502-2020 |
Laboratory animal—Guideline of COVID-19 animal models preparation 实验动物 新型冠状病毒肺炎（COVID-19）动物模型制备指南 |
China National Standards Laboratory |
English PDF |
| GB/T 30431-2020 |
Gas chromatography for Laboratory 实验室气相色谱仪 |
China National Standards Laboratory |
English PDF |
| GB/T 29479.2-2020 |
Mobile Laboratory—Part 2: Competence requirements 移动实验室 第2部分：能力要求 |
China National Standards Laboratory |
English PDF |
| GB/T 38740-2020 |
Laboratory animal—Method for examination of simian Marburg virus (MARV) 实验动物 猴马尔堡病毒检测方法 |
China National Standards Laboratory |
English PDF |
| GB/T 38502-2020 |
Test method for bactericidal effect of disinfectant in Laboratory 消毒剂实验室杀菌效果检验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 39647-2020 |
Laboratory animal—Quality control of reproductive and developmental health 实验动物 生殖和发育健康质量控制 |
China National Standards Laboratory |
English PDF |
| GB/T 39556-2020 |
Intelligent Laboratory—Instruments and equipment—Communication requirements 智能实验室 仪器设备 通信要求 |
China National Standards Laboratory |
English PDF |
| GB/T 39555-2020 |
Intelligent Laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment 智能实验室 仪器设备 气候、环境试验设备的数据接口 |
China National Standards Laboratory |
English PDF |
| GB/T 39650-2020 |
Laboratory animal—Rules for nomenclature of mouse and rat strains 实验动物 小鼠、大鼠品系命名规则 |
China National Standards Laboratory |
English PDF |
| GB/T 39649-2020 |
Laboratory animal—Quality control of laboratory fish 实验动物 实验鱼质量控制 |
China National Standards Laboratory |
English PDF |
| GB/T 39646-2020 |
Laboratory animal—General guidelines for health monitoring 实验动物 健康监测总则 |
China National Standards Laboratory |
English PDF |
| GB/T 29473-2020 |
Classification, code and marking of mobile Laboratory 移动实验室分类、代号及标记 |
China National Standards Laboratory |
English PDF |
| GB/T 29471-2020 |
General specification for mobile Laboratory of food safety inspection 食品安全检测移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 27425-2020 |
Good research Laboratory practice 科研实验室良好规范 |
China National Standards Laboratory |
English PDF |
| GB/T 8421-2020 |
Agricultural wheeled tractors—Operator's seat—Laboratory measurement of transmitted vibration 农业轮式拖拉机 驾驶员座椅 传递振动的实验室测量 |
China National Standards Laboratory |
English PDF |
| GB/T 28043-2019 |
Statistical methods for use in proficiency testing by interLaboratory comparison 利用实验室间比对进行能力验证的统计方法 |
China National Standards Laboratory |
English PDF |
| GB/T 16422.1-2019 |
Plastics—Methods of exposure to Laboratory light sources—Part 1:General guidance 塑料 实验室光源暴露试验方法 第1部分：总则 |
China National Standards Laboratory |
English PDF |
| GB/T 28043-2019 |
Statistical methods for use in proficiency testing by interLaboratory comparison 利用实验室间比对进行能力验证的统计方法 |
China National Standards Laboratory |
English PDF |
| GB/T 16422.1-2019 |
Plastics—Methods of exposure to Laboratory light sources—Part 1:General guidance 塑料 实验室光源暴露试验方法 第1部分：总则 |
China National Standards Laboratory |
English PDF |
| GB 4793.4-2019 |
Safety requirements for electrical equipment for measurement,control and Laboratory use—Part 4: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials 测量、控制和实验室用电气设备的安全要求 第4部分：用于处理医用材料的灭菌器和清洗消毒器的特殊要求 |
China National Standards Laboratory |
English PDF |
| GB/T 37986-2019 |
General technical specification for mobile Laboratory of engineering test 工程检测移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 37940-2019 |
General technical specification for mobil Laboratory of atmospheric environmental monitoring 大气环境监测移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 36917.2-2018 |
Dentistry—Laboratory cutters—Part 2:Carbide laboratory cutters 牙科学-技工室用刃具-第2部分：技工室用硬质合金刃具 |
China National Standards Laboratory |
English PDF |
| GB/T 36917.1-2018 |
Dentistry—Laboratory cutters—Part 1:Steel laboratory cutters 牙科学-技工室用刃具-第1部分：技工室用钢质刃具 |
China National Standards Laboratory |
English PDF |
| GB/T 36937-2018 |
Environmental consciousness design for Laboratory instruments and equipments 实验室仪器及设备环境意识设计 |
China National Standards Laboratory |
English PDF |
| GB/T 37140-2018 |
Technical requirements acceptance specification for inspection and testing Laboratory 检验检测实验室技术要求验收规范 |
China National Standards Laboratory |
English PDF |
| GB/T 36167-2018 |
Method for coal preparation Laboratory timed-release flotation analysis 选煤实验室分步释放浮选试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 36308-2018 |
Specification of integrity evaluation for inspection body and Laboratory 检验检测机构诚信评价规范 |
China National Standards Laboratory |
English PDF |
| GB/T 17213.14-2018 |
Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分：噪声的考虑 实验室内测量液动流流经控制阀产生的噪声 |
China National Standards Laboratory |
English PDF |
| GB/T 20441.2-2018 |
Electroacoustics—Measurement microphones—Part 2: Primary method for pressure calibration of Laboratory standard microphones by the reciprocity technique 电声学 测量传声器 第2部分：采用互易技术对实验室标准传声器声压校准的原级方法 |
China National Standards Laboratory |
English PDF |
| GB/T 17772-2018 |
Earth-moving machinery—Laboratory evaluations of protective structures—Specifications for deflection-limiting volume 土方机械 保护结构的实验室鉴定 挠曲极限量的规定 |
China National Standards Laboratory |
English PDF |
| GB/T 35892-2018 |
Laboratory animal—Guideline for ethical review of animal welfare 实验动物 福利伦理审查指南 |
China National Standards Laboratory |
English PDF |
| GB/T 35804-2018 |
Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in Laboratory test chambers 硫化橡胶或热塑性橡胶 耐臭氧龟裂 测定试验箱中臭氧浓度的试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 35823-2018 |
Laboratory animals－General requirements for animal experiment 实验动物 动物实验通用要求 |
China National Standards Laboratory |
English PDF |
| GB/T 34791-2017 |
Laboratory animal－Requirement for quality control 实验动物 质量控制要求 |
China National Standards Laboratory |
English PDF |
| GB/Z 34792-2017 |
Laboratory animal—Technical specification for breeds introducing 实验动物 引种技术规程 |
China National Standards Laboratory |
English PDF |
| GB/T 22159.5-2017 |
Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分：弹性支撑件低频平动动刚度的驱动点测量方法 |
China National Standards Laboratory |
English PDF |
| GB/T 22159.4-2017 |
Acoustics and vibration―Laboratory measurement of vibro-acoustic transfer properties of resilient elements―Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第4部分：弹性非支撑件平动动刚度 |
China National Standards Laboratory |
English PDF |
| GB/T 34877.3-2017 |
Industrial fans—Determination of fan sound power levels under standardized Laboratory conditions—Part3:Enveloping surface methods 工业风机 标准实验室条件下风机声功率级的测定 第3部分：包络面法 |
China National Standards Laboratory |
English PDF |
| GB/T 4157-2017 |
Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environment 金属在硫化氢环境中抗硫化物应力开裂和应力腐蚀开裂的实验室试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 3685-2017 |
Conveyor belts—Laboratory scale flammability characteristics—Test method 输送带 实验室规模的燃烧特性 试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 34240-2017 |
Laboratory animal—Feed producing 实验动物 饲料生产 |
China National Standards Laboratory |
English PDF |
| GB/T 33938-2017 |
Vertical roller mill Laboratory bench application test method 立磨试验台应用试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 33709-2017 |
Mobile Laboratory—Guidance on dissemination and traceability of the value of equipment 移动实验室 仪器设备量值溯源与传递指南 |
China National Standards Laboratory |
English PDF |
| GB/T 33710-2017 |
Mobile Laboratory—Method for classification and gradation 移动实验室 分类分级方法 |
China National Standards Laboratory |
English PDF |
| GB/T 33711-2017 |
Mobile Laboratory—General technical specification for information transmission system 移动实验室 信息传输系统通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 35599-2017 |
Laboratory glass and glassware outward defect terms 仪器用玻璃及其制品的外观缺陷术语 |
China National Standards Laboratory |
English PDF |
| GB/T 35400-2017 |
General technical specification for mobile Laboratory of fuel dispensers metrological verification 燃油加油机计量检定移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 35401-2017 |
Mobile Laboratory general specification for detection of groundwater 地下水检测移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 35395-2017 |
General technical specification for mobile testing Laboratory of quality and safety of agricultural products 农产品质量安全检测移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 19889.18-2017 |
Acoustics—Measurement of sound insulation in buildings and of building elements—Part 18: Laboratory measurement of sound generated by rainfall on building elements 声学 建筑和建筑构件隔声测量 第18部分：建筑构件雨噪声隔声的实验室测量 |
China National Standards Laboratory |
English PDF |
| GB/T 35396-2017 |
General specification for occupational hazardous agents monitoring mobile Laboratory 职业病危害因素检测移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 33246-2016 |
Mobile Laboratory—General specification for work table 移动实验室 操作台通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 33253-2016 |
Mobile Laboratory—General specification for carriers 移动实验室 载具通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 33247-2016 |
Mobile Laboratory—Design guideline of water supply and drainage system 移动实验室 供、排水系统设计指南 |
China National Standards Laboratory |
English PDF |
| GB/T 4502-2016 |
Laboratory test methods for passenger car tyres capabilities 轿车轮胎性能室内试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 32720-2016 |
Laboratory methods for determination of microbial soil respiration 土壤微生物呼吸的实验室测定方法 |
China National Standards Laboratory |
English PDF |
| GB/T 32725-2016 |
Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the Laboratory 实验室测定微生物过程、生物量与多样性用土壤的好氧采集、处理及贮存指南 |
China National Standards Laboratory |
English PDF |
| GB/T 4501-2016 |
Laboratory test methods for truck and bus tyres capabilities 载重汽车轮胎性能室内试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 32705-2016 |
Safety requirements for Laboratory instrument and equipment—Power supply for instrument and equipment 实验室仪器及设备安全规范 仪用电源 |
China National Standards Laboratory |
English PDF |
| GB/T 32704-2016 |
Safety requirements for Laboratory instrument and equipment—Balance instrument 实验室仪器及设备安全规范 天平仪器 |
China National Standards Laboratory |
English PDF |
| GB/T 32706-2016 |
Safety requirements for Laboratory instruments and equipment—Noise measuring instruments 实验室仪器和设备安全规范 噪声测量仪器 |
China National Standards Laboratory |
English PDF |
| GB/T 32708-2016 |
Safety requirements for Laboratory instrument and equipment—Autoclave 实验室仪器及设备安全规范 反应釜 |
China National Standards Laboratory |
English PDF |
| GB/T 32707-2016 |
Safety requirements for Laboratory instruments and equipment—Oxygen bomb calorimeter 实验室仪器及设备安全规范 氧弹式热量计 |
China National Standards Laboratory |
English PDF |
| GB/T 32709-2016 |
Safety requirements for Laboratory instruments and equipment—Industry analysis instrument 实验室仪器及设备安全规范 煤炭工业分析仪 |
China National Standards Laboratory |
English PDF |
| GB/T 20448.2-2016 |
Self-propelled machinery for forestry—Laboratory tests and performance requirements for roll-over protective structures—Part 2: Machines having a rotating platform with a cab and boom on the platform 自行式林业机械 滚翻保护结构实验室试验和性能要求 第2部分：回转平台上安装驾驶室和起重臂的机械 |
China National Standards Laboratory |
English PDF |
| GB/T 12809-2015 |
Laboratory glassware—Principles of design and construction of volumetric glassware 实验室玻璃仪器 玻璃量器的设计和结构原则 |
China National Standards Laboratory |
English PDF |
| GB/T 12808-2015 |
Laboratory glassware—One mark pipettes 实验室玻璃仪器 单标线吸量管 |
China National Standards Laboratory |
English PDF |
| GB/T 12803-2015 |
Laboratory glassware—Conical graduated 实验室玻璃仪器 量杯 |
China National Standards Laboratory |
English PDF |
| GB/T 32241-2015 |
Equipment for crop protection—Methods for the Laboratory measurement of spray drift—Wind tunnels 植物保护机械 喷雾飘移的实验室测量方法 风洞试验 |
China National Standards Laboratory |
English PDF |
| GB/T 32146.3-2015 |
Technical requirements of design and construction for inspection and testing Laboratory—Part 3: Food laboratory 检验检测实验室设计与建设技术要求 第3部分：食品实验室 |
China National Standards Laboratory |
English PDF |
| GB/T 32146.2-2015 |
Technical requirements of design and construction for inspection and testing Laboratory—Part 2: Electrical laboratory 检验检测实验室设计与建设技术要求 第2部分：电气实验室 |
China National Standards Laboratory |
English PDF |
| GB/T 32146.1-2015 |
Technical requirement of design and construction for inspection and testing Laboratory—Part 1: General specification 检验检测实验室设计与建设技术要求 第1部分：通用要求 |
China National Standards Laboratory |
English PDF |
| GB/T 17213.8-2015 |
Industrial-process control valves—Part 8-1: Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves 工业过程控制阀 第8-1部分：噪声的考虑 实验室内测量空气动力流流经控制阀产生的噪声 |
China National Standards Laboratory |
English PDF |
| GB/T 31880-2015 |
Essential requirements of integrity for inspection body and Laboratory 检验检测机构诚信基本要求 |
China National Standards Laboratory |
English PDF |
| GB/T 18260-2015 |
Method of Laboratory test for toxicity of wood preservatives against termites 木材防腐剂对白蚁毒效实验室试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 31429-2015 |
Guide for quality management in a coal Laboratory 煤炭实验室测试质量控制导则 |
China National Standards Laboratory |
English PDF |
| GB/T 51086-2015 |
Standard for terminology of pharmaceutical Laboratory engineering 医药实验工程术语标准 |
China National Standards Laboratory |
English PDF |
| GB 15193.2-2014 |
National Food Safety Standard-Code of Practice for Food Toxicology Laboratory 食品安全国家标准 食品毒理学实验室操作规范 |
China National Standards Laboratory |
English PDF |
| GB/T 31190-2014 |
Technical specifications for collecting Laboratory chemical waste 实验室废弃化学品收集技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 31137-2014 |
Temperature controller for Laboratory resistance furnaces 实验电阻炉温度控制器 |
China National Standards Laboratory |
English PDF |
| GB/T 31023-2014 |
Mobile Laboratory―General specification for equipment operating condition test 移动实验室 设备工况测试通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 31019-2014 |
Mobile Laboratory―Guidance on ergonomic principles 移动实验室 人类工效学设计指南 |
China National Standards Laboratory |
English PDF |
| GB/T 31018-2014 |
Mobile Laboratory―Modular design guide 移动实验室 模块化设计指南 |
China National Standards Laboratory |
English PDF |
| GB/T 31017-2014 |
Mobile Laboratory―terminology 移动实验室 术语 |
China National Standards Laboratory |
English PDF |
| GB/T 31016-2014 |
Mobile Laboratory―General specification for collecting and pre-treating of sample 移动实验室 样品采集与处理通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 31014-2014 |
Acoustics―Laboratory methods of underwater target strength measurement 声学 水声目标强度测量实验室方法 |
China National Standards Laboratory |
English PDF |
| GB/T 31010-2014 |
Spectral calibration in Laboratory for dispersive hyperspectral sensor 色散型高光谱遥感器实验室光谱定标 |
China National Standards Laboratory |
English PDF |
| GB/T 31004.3-2014 |
Acoustics―Measurement of sound insulation in buildings and of building elements using sound intensity―Part 3: Laboratory measurements at low frequencies 声学 建筑和建筑构件隔声声强法测量 第3部分：低频段的实验室测量 |
China National Standards Laboratory |
English PDF |
| GB/T 31004.1-2014 |
Acoustics―Measurement of sound insulation in buildings and of building elements using sound intensity―Part 1: Laboratory measurements 声学 建筑和建筑构件隔声声强法测量 第1部分：实验室测量 |
China National Standards Laboratory |
English PDF |
| GB/T 27416-2014 |
Laboratory animal institutions—General requirements for quality and competence 实验动物机构 质量和能力的通用要求 |
China National Standards Laboratory |
English PDF |
| GB/Z 30993-2014 |
Safety requirements for electrical equipment for measurement, control, and Laboratory use―Conformity verification report for GB 4793.1-2007 测量、控制和实验室用电气设备的安全要求 GB 4793.1-2007的符合性验证报告格式 |
China National Standards Laboratory |
English PDF |
| GB/T 19930.2-2014 |
Earth-moving machinery―Laboratory tests and performance requirements for protective structures of excavators―Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t 土方机械 挖掘机保护结构的实验室试验和性能要求 第2部分：6t以上挖掘机的滚翻保护结构(ROPS) |
China National Standards Laboratory |
English PDF |
| GB/T 17922-2014 |
Earth-moving machinery―Roll-over protective structures―Laboratory tests and performance requirements 土方机械 滚翻保护结构 实验室试验和性能要求 |
China National Standards Laboratory |
English PDF |
| GB/T 30790.6-2014 |
Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 6: Laboratory performance test methods 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第6部分：实验室性能测试方法 |
China National Standards Laboratory |
English PDF |
| GB/T 16422.4-2014 |
Plastics―Methods of exposure to Laboratory light sources―Part 4：Open-flame carbon-arc lamps 塑料 实验室光源暴露试验方法 第4部分：开放式碳弧灯 |
China National Standards Laboratory |
English PDF |
| GB/T 16422.3-2014 |
Plastics―Methods of exposure to Laboratory light sources―Part 3: Fluorescent UV lamps 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 |
China National Standards Laboratory |
English PDF |
| GB/T 16422.2-2014 |
Plastics―Methods of exposure to Laboratory light sources―Part 2：Xenon-arc sources 塑料 实验室光源暴露试验方法 第2部分：氙弧灯 |
China National Standards Laboratory |
English PDF |
| GB/T 30238-2013 |
Normalization construction and basic requirements of instruments and equipments of conservation and restoration Laboratory of Movable Cultural Relics 可移动文物保护修复室规范化建设与仪器装备基本要求 |
China National Standards Laboratory |
English PDF |
| GB/T 30431-2013 |
Gas chromatograph for Laboratory 实验室气相色谱仪 |
China National Standards Laboratory |
English PDF |
| GB/Z 30249-2013 |
Safety requirements for electrical equipment for measurement,control,and Laboratory use―Protocol for the preparation of conformity verfication reports for the GB 4793 series 测量、控制和实验室用电气设备的安全要求 GB 4793的符合性验证报告的编写规程 |
China National Standards Laboratory |
English PDF |
| GB 4793.9-2013 |
Safety requirements for electrical equipment for measurement, control and Laboratory use―Part 9: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes 测量、控制和实验室用电气设备的安全要求 第9部分：实验室用分析和其他目的自动和半自动设备的特殊要求 |
China National Standards Laboratory |
English PDF |
| GB/Z 30154-2013 |
Medical laboratories―Guidance on Laboratory implementation of GB/T 22576-2008 医学实验室 GB/T 22576-2008 实验室实施指南 |
China National Standards Laboratory |
English PDF |
| GB/T 30099-2013 |
General specifications for Laboratory centrifuge 实验室离心机通用技术条件 |
China National Standards Laboratory |
English PDF |
| GB/T 30098-2013 |
Laboratory magnetic driven autoclave 实验室用磁力驱动反应釜 |
China National Standards Laboratory |
English PDF |
| GB/T 30096-2013 |
Major letter symbols for Laboratory instrument and equipment 实验室仪器和设备常用文字符号 |
China National Standards Laboratory |
English PDF |
| GB/T 30046.1-2013 |
Forth flotation testing―Part 1: Laboratory procedure 煤粉（泥）浮选试验 第1部分：试验过程 |
China National Standards Laboratory |
English PDF |
| GB/T 29883-2013 |
Packaging for dangerous goods - Rigid plastics intermediate bulk containers - Methods of exposure to Laboratory light sources（fluorescence UV lamp） 危险品包装 刚性塑料中型散装容器 实验室光源（荧光紫外灯）暴露法 |
China National Standards Laboratory |
English PDF |
| GB/T 29905-2013 |
Laboratory method of determining the leachability of wood preservatives 木材防腐剂流失率试验方法 |
China National Standards Laboratory |
English PDF |
| GB/T 19277.2-2013 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a Laboratory-scale test 受控堆肥条件下材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法 第2部分: 用重量分析法测定实验室条件下二氧化碳的释放量 |
China National Standards Laboratory |
English PDF |
| GB/T 29643-2013 |
Sodium hydroxide for industrial use - Laboratory sample - Preparation of the main solution for carrying out certain determinations 工业用氢氧化钠 实验室样品和进行项目测定用主溶液的制备 |
China National Standards Laboratory |
English PDF |
| GB/T 29287-2012 |
Pulps - Laboratory beating - PFI mill method 纸浆 实验室打浆 PFI磨法 |
China National Standards Laboratory |
English PDF |
| GB/T 29285-2012 |
Pulps - Laboratory wet disintegration - Disintegration of mechanical pulps 纸浆 实验室湿解离 机械浆解离 |
China National Standards Laboratory |
English PDF |
| GB/T 29600-2012 |
Technical specification of the temperature & humidity control system for the mobile Laboratory 移动实验室用温湿度控制系统技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 29479-2012 |
General requirements of mobile Laboratory 移动实验室通用要求 |
China National Standards Laboratory |
English PDF |
| GB/T 29477-2012 |
General technical specification for mobile Laboratory shelter 移动实验室实验舱通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 29476-2012 |
General technical specification for mobile Laboratory instruments and equipments 移动实验室仪器设备通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 29475-2012 |
Design principles and basic requirements for mobile Laboratory 移动实验室设计原则及基本要求 |
China National Standards Laboratory |
English PDF |
| GB/T 29474-2012 |
General technical specification for the interior decoration material of mobile Laboratory 移动实验室内部装饰材料通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 29473-2012 |
Classification,code and marking of mobile Laboratory 移动实验室分类、代号及标记 |
China National Standards Laboratory |
English PDF |
| GB/T 29472-2012 |
Safety management specification for mobile Laboratory 移动实验室安全管理规范 |
China National Standards Laboratory |
English PDF |
| GB/T 29471-2012 |
General technical specification for mobile Laboratory of food safety inspection 食品安全检测移动实验室通用技术规范 |
China National Standards Laboratory |
English PDF |
| GB/T 29478-2012 |
Mobile Laboratory hazardous waste management specification 移动实验室有害废物管理规范 |
China National Standards Laboratory |
English PDF |
| GB/T 29170-2012 |
Petroleum and natural gas industries - Drilling fluids - Laboratory testing 石油天然气工业 钻井液实验室测试 |
China National Standards Laboratory |
English PDF |
| GB/T 27413-2012 |
Quality control and quality estimation in petroleum products testing Laboratory 石油产品检测实验室质量控制与质量评估 |
China National Standards Laboratory |
English PDF |
| GB/T 27412-2012 |
Detection of Laboratory bias using single test result from check standard 基于核查样品单次测量结果的实验室偏倚检出 |
China National Standards Laboratory |
English PDF |
| GB/T 27411-2012 |
Routine methods for evaluation and expression of measurement uncertainty in testing Laboratory 检测实验室中常用不确定度评定方法与表示 |
China National Standards Laboratory |
English PDF |
| GB/T 29254-2012 |
Laboratory autoclave controller 实验室反应釜用控制器 |
China National Standards Laboratory |
English PDF |
| GB/T 29253-2012 |
Major graphical symbols for Laboratory instruments and equipment 实验室仪器和设备常用图形符号 |
China National Standards Laboratory |
English PDF |
| GB/T 29252-2012 |
Rule of the quality inspection of Laboratory instruments and equipments 实验室仪器和设备质量检验规则 |
China National Standards Laboratory |
English PDF |
| GB/T 22159.2-2012 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第2部分：弹性支撑件平动动刚度的直接测量方法 |
China National Standards Laboratory |
English PDF |
| GB/T 22159.1-2012 |
Acoustics and vibration-Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1 : Principles and guidelines 声学与振动 弹性元件振动-声传递特性实验室测量方法 第1部分：原理与指南 |
China National Standards Laboratory |
English PDF |
| GB/T 27894.5-2012 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen,carbon dioxideand C1 to C5 and C6+ hydrocarbons for a Laboratory and on-line process application using three columns 天然气 在一定不确定度下用气相色谱法测定组成 第5部分：实验室和在线工艺系统中用三根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards Laboratory |
English PDF |
| GB/T 27894.4-2012 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen,carbon dioxide and C1 to C5 and C6+ hydrocarbons for a Laboratory and on-line measuring system using two columns 天然气 在一定不确定度下用气相色谱法测定组成 第4部分：实验室和在线测量系统中用两根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards Laboratory |
English PDF |
| Find out:415Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
