Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/Z 14048.24-2024 |
Low-voltage switchgear and control equipment - Part 7-5: Auxiliary devices - Terminal bLocks for aluminum conductors {译} 低压开关设备和控制设备-第7-5部分：辅助器件-铝导体的接线端子排 |
China National Standards Lock |
 English PDF |
| GB/T 18891-2024 |
CLock timing number identification of phase difference in three-phase AC system {译} 三相交流系统相位差的钟时序数标识 |
China National Standards Lock |
English PDF |
| GB/T 43785-2024 |
Performance characterization and measurement method of optical cLock {译} 光钟性能表征及测量方法 |
China National Standards Lock |
English PDF |
| GB/T 43757-2024 |
Locking discs {译} 锁紧盘 |
China National Standards Lock |
English PDF |
| GB/T 43582-2023 |
BLockchain and Distributed Accounting Technology Application Programming Interface Middleware Technology Guide {译} 区块链和分布式记账技术 应用程序接口 中间件技术指南 |
China National Standards Lock |
English PDF |
| GB/T 43580-2023 |
BLockchain and Distributed Accounting Technology General Service Guide for Certificate Deposits {译} 区块链和分布式记账技术 存证通用服务指南 |
China National Standards Lock |
English PDF |
| GB/T 43579-2023 |
BLockchain and distributed accounting technology Smart contract life cycle management technical specifications {译} 区块链和分布式记账技术 智能合约生命周期管理技术规范 |
China National Standards Lock |
English PDF |
| GB/T 43575-2023 |
BLockchain and distributed accounting technology system testing specifications {译} 区块链和分布式记账技术 系统测试规范 |
China National Standards Lock |
English PDF |
| GB/T 43572-2023 |
BLockchain and Distributed Ledger Technology Terminology {译} 区块链和分布式记账技术 术语 |
China National Standards Lock |
English PDF |
| GB 24542-2023 |
Fall protection Self-Locking device with rigid guide rails {译} 坠落防护 带刚性导轨的自锁器 |
China National Standards Lock |
English PDF |
| GB/T 43432.3-2023 |
Metallic materials - Barcol hardness test Part 3: Calibration of standard hardness bLocks {译} 金属材料 巴氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 42907-2023 |
Testing of non-equilibrium carrier recombination lifetime in silicon ingots, silicon bLocks and silicon wafers Non-contact eddy current induction method {译} 硅锭、硅块和硅片中非平衡载流子复合寿命的测试 非接触涡流感应法 |
China National Standards Lock |
English PDF |
| GB/T 42826-2023 |
Radio controlled cLock signal reception test method {译} 电波钟 信号接收测试方法 |
China National Standards Lock |
English PDF |
| GB/T 26716-2023 |
CLocks Antimagnetic Watches {译} 钟表 防磁手表 |
China National Standards Lock |
English PDF |
| GB/T 42570-2023 |
Information Security Technology BLockchain Technology Security Framework {译} 信息安全技术 区块链技术安全框架 |
China National Standards Lock |
English PDF |
| GB/T 42571-2023 |
Information Security Technology BLockchain Information Service Security Specifications {译} 信息安全技术 区块链信息服务安全规范 |
China National Standards Lock |
English PDF |
| GB/T 42752-2023 |
BLockchain and Distributed Ledger Technology Reference Architecture {译} 区块链和分布式记账技术 参考架构 |
China National Standards Lock |
English PDF |
| GB 18436-2022 |
Engine Logbook and CLock Record Book {译} 轮机日志和车钟记录簿 |
China National Standards Lock |
English PDF |
| GB/T 5900.2-2022 |
Machine tools - Dimensions of spindle end and chuck connection - Part 2: Cam-Lock type {译} 机床 主轴端部与卡盘连接尺寸 第2部分：凸轮锁紧型 |
China National Standards Lock |
English PDF |
| GB/T 17394.3-2022 |
Metallic materials - Leeb hardness test - Part 3: Calibration of standard hardness bLocks {译} 金属材料 里氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 230.3-2022 |
Metallic materials - Rockwell hardness test - Part 3: Calibration of standard hardness bLocks {译} 金属材料 洛氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 21838.3-2022 |
Metallic materials - Instrumented indentation tests for hardness and material parameters - Part 3: Calibration of standard bLocks {译} 金属材料 硬度和材料参数的仪器化压入试验 第3部分：标准块的标定 |
China National Standards Lock |
English PDF |
| GB/T 231.3-2022 |
Metallic materials - Brinell hardness test - Part 3: Calibration of standard hardness bLocks {译} 金属材料 布氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 34722-2017 |
Impregnated film paper veneer plywood and bLockboard "No. 1 Amendment" {译} 浸渍胶膜纸饰面胶合板和细木工板《第1号修改单》 |
China National Standards Lock |
English PDF |
| GB/T 19769.4-2022 |
Function bLocks - Part 4: Rules for consistent line rules {译} 功能块 第4部分：一致性行规的规则 |
China National Standards Lock |
English PDF |
| GB/T 19769.2-2022 |
Function bLocks - Part 2: requirements for software tools {译} 功能块 第2部分：软件工具要求 |
China National Standards Lock |
English PDF |
| GB/T 19769.1-2022 |
Function bLock part 1: structure {译} 功能块 第1部分：结构 |
China National Standards Lock |
English PDF |
| GB/T 41503-2022 |
Preparation of refractory sprayed material test bLock with amorphous refractory pneumatic nozzle and mixed spray gun {译} 不定形耐火材料 气动喷嘴混合型喷枪制备耐火喷射料试块 |
China National Standards Lock |
English PDF |
| GB/T 14536.13-2022 |
Electric automatic controllers - Part 13: Particular requirements for electric door Locks {译} 电自动控制器 第13部分：电动门锁的特殊要求 |
China National Standards Lock |
English PDF |
| GB/T 42207.5-2022 |
Connectors for electronic equipment - Product requirements - Rectangular connectors - Part 5: Detail specification for snap Lock rewirable power connectors with rated voltage DC 250 V and rated current 30 A {译} 电子设备用连接器 产品要求 矩形连接器 第5部分：额定电压直流250 V额定电流30 A卡扣锁紧可重复接线电源连接器详细规范 |
China National Standards Lock |
English PDF |
| GB/T 42098-2022 |
Thin Self-Locking Nuts with Lug Plates for Aerospace {译} 航空航天用单耳托板薄自锁螺母 |
China National Standards Lock |
English PDF |
| GB/T 42179-2022 |
MJ Thread Dodecagonal Spline Self-Locking Nuts for Aerospace {译} 航空航天用MJ螺纹十二角花键自锁螺母 |
China National Standards Lock |
English PDF |
| GB/T 42094-2022 |
Swimming self-Locking nuts for aerospace with MJ thread double lug support plate with countersunk head socket {译} 航空航天用带沉头窝的MJ螺纹双耳托板游动自锁螺母 |
China National Standards Lock |
English PDF |
| GB/T 42095-2022 |
Swimming self-aligning self-Locking nuts for MJ thread double-ear brackets for aerospace {译} 航空航天用MJ螺纹双耳托板游动自调心自锁螺母 |
China National Standards Lock |
English PDF |
| GB/T 42252-2022 |
Torque and pretightening force test method of high Lock nut for aviation {译} 航空用高锁螺母力矩及预紧力测试方法 |
China National Standards Lock |
English PDF |
| GB/T 42178-2022 |
Requirements for the interface of cargo entering and exiting the space station airLock {译} 空间站气闸舱进出货物接口要求 |
China National Standards Lock |
English PDF |
| GB/T 14048.22-2022 |
Low-voltage switchgear and controlgear - Part 7-4: Auxiliary devices - PCB terminal bLocks for copper conductors {译} 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排 |
China National Standards Lock |
English PDF |
| GB/T 28826.4-2022 |
Information technology - Common biometric interchange format framework - Part 4: Security bLock format specification {译} 信息技术 公用生物特征识别交换格式框架 第4部分：安全块格式规范 |
China National Standards Lock |
English PDF |
| GB/T 4678.15-2021 |
Die casting dies—Components—Part 15: Spacer bLocks 压铸模 零件 第15部分：垫块 |
China National Standards Lock |
English PDF |
| GB/T 37162.3-2021 |
Hydraulic fluid power-Monitoring the level of particulate contamination of the fluid-Part 3:Use of the filter bLockage technique 液压传动 液体颗粒污染度的监测 第3部分：利用滤膜阻塞技术 |
China National Standards Lock |
English PDF |
| GB/T 39992-2021 |
Sensory analysis—Methodology—Balanced incomplete bLock designs 感官分析 方法学 平衡不完全区组设计 |
China National Standards Lock |
English PDF |
| GB/T 24295-2021 |
Intelligent mail & parcel Locker 智能信包箱 |
China National Standards Lock |
English PDF |
| GB/T 39935-2021 |
Plastics—Film and sheeting—Determination of bLocking resistance 塑料制品 薄膜和片材 抗粘连性的测定 |
China National Standards Lock |
English PDF |
| GB/T 39934-2021 |
Plastics—Film and sheeting—Determination of bLocking resistance 家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法 |
China National Standards Lock |
English PDF |
| GB/T 11313.41-2021 |
Radio-frequency connectors—Part 41: Sectional specification for CQA series quick Lock R.F. coaxial connectors 射频连接器 第41部分: CQA系列快速锁紧射频连接器分规范 |
China National Standards Lock |
English PDF |
| GB/T 41108.3-2021 |
Safety of machinery -- Safety requirements for interLocking devices -- Part 3: Trapped key interlocking devices and systems 机械安全 联锁装置的安全要求 第3部分：截留钥匙联锁装置及系统 |
China National Standards Lock |
English PDF |
| GB/T 41108.2-2021 |
Safety of machinery -- Safety requirements for interLocking devices -- Part 2: Interlocking devices with guard-locking 机械安全 联锁装置的安全要求 第2部分：带防护锁定的联锁装置 |
China National Standards Lock |
English PDF |
| GB/T 41108.1-2021 |
Safety of machinery -- Safety requirements for interLocking devices -- Part 1: Direct opening position switches 机械安全 联锁装置的安全要求 第1部分：直接断开位置开关 |
China National Standards Lock |
English PDF |
| GB/T 41114-2021 |
Non-destructive testing -- Ultrasonic testing -- Specification for a calibration bLock for phased array testing(PAUT) 无损检测? 超声检测 相控阵超声检测标准试块规范 |
China National Standards Lock |
English PDF |
| GB/T 41027-2021 |
Aluminum alloy MJ thread with small flange blind hole self Locking insert for aviation 航空用MJ螺纹铝合金带小凸缘盲孔自锁镶嵌件 |
China National Standards Lock |
English PDF |
| GB/T 11313.42-2021 |
Radio-frequency connectors -- Part 42: Sectional specification for CQN series quick Lock RF connectors 射频连接器 第42部分：CQN系列快速锁紧射频连接器分规范 |
China National Standards Lock |
English PDF |
| GB/T 17964-2021 |
Information security technology—Modes of operation for a bLock cipher 信息安全技术 分组密码算法的工作模式 |
China National Standards Lock |
English PDF |
| GB/T 11968-2020 |
Autoclaved aerated concrete bLocks 蒸压加气混凝土砌块 |
China National Standards Lock |
English PDF |
| GB/T 39036-2020 |
Integrity requirements of bLock fabrication for ship 船舶分段制造完整性要求 |
China National Standards Lock |
English PDF |
| GB/T 38752-2020 |
Difficult-flammable bLockboard 难燃细木工板 |
China National Standards Lock |
English PDF |
| GB/T 39724-2020 |
Technical specifications and testing methods for cesium atomic cLock 铯原子钟技术要求及测试方法 |
China National Standards Lock |
English PDF |
| GB/T 15852.1-2020 |
Information technology—Security techniques—Message authentication codes—Part 1: Mechanisms using a bLock cipher 信息技术 安全技术 消息鉴别码 第1部分：采用分组密码的机制 |
China National Standards Lock |
English PDF |
| GB/T 39432-2020 |
Non-destructive testing—Ultrasonic testing—Specification for step wedge calibration bLock 无损检测 超声检测 阶梯试块 |
China National Standards Lock |
English PDF |
| GB/T 18852-2020 |
Non-destructive testing—Ultrasonic testing—Reference bLocks and test procedures for the characterization of contact probe sound beams 无损检测 超声检测 测量接触探头声束特性的参考试块和方法 |
China National Standards Lock |
English PDF |
| GB/T 25318-2019 |
Locking devices for ball and socket couplings of string insulator units—Dimensions and tests 绝缘子串元件球窝联接用锁紧销 尺寸和试验 |
China National Standards Lock |
English PDF |
| GB/T 25318-2019 |
Locking devices for ball and socket couplings of string insulator units—Dimensions and tests 绝缘子串元件球窝联接用锁紧销 尺寸和试验 |
China National Standards Lock |
English PDF |
| GB/T 38021-2019 |
Analogue quartz cLocks—Timing accuracy 指针式石英钟 走时精度 |
China National Standards Lock |
English PDF |
| GB/T 37981-2019 |
Analysis techniques for dependability—Reliability bLock diagram and boolean methods 可信性分析技术 可靠性框图法和布尔代数法 |
China National Standards Lock |
English PDF |
| GB/T 37737-2019 |
Information technology—Cloud computing—General technique requirements of distributed bLock storage system 信息技术 云计算 分布式块存储系统总体技术要求 |
China National Standards Lock |
English PDF |
| GB 38030.5-2019 |
Dimensions series of standard transport ship types passing the Locks of inland rivers—Part 5：Heilongjiang-Songhuajiang River 内河过闸运输船舶标准船型主尺度系列 第5部分：黑龙江-松花江 |
China National Standards Lock |
English PDF |
| GB 38030.4-2019 |
Dimensions series of standard transport ship types passing the Locks of inland rivers—Part 4：The “three lanes” of the Pearl River system 内河过闸运输船舶标准船型主尺度系列 第4部分：珠江水系“三线” |
China National Standards Lock |
English PDF |
| GB 38030.3-2019 |
Dimensions series of standard transport ship types passing the Locks of inland rivers—Part 3：Xijiang main river 内河过闸运输船舶标准船型主尺度系列 第3部分：西江航运干线 |
China National Standards Lock |
English PDF |
| GB 38030.2-2019 |
Dimensions series of standard transport ship types passing the Locks of inland rivers—Part 2：Grand Canal and Huai River system 内河过闸运输船舶标准船型主尺度系列 第2部分：京杭运河、淮河水系 |
China National Standards Lock |
English PDF |
| GB 38030.1-2019 |
Dimensions series of standard transport ship types passing the Locks of inland rivers—Part 1：Changjiang River system 内河过闸运输船舶标准船型主尺度系列 第1部分：长江水系 |
China National Standards Lock |
English PDF |
| GB/T 37751.1-2019 |
Residual current operated circuit-breakers for household and similar use—Part 1: Outline of bLocks and modules for residual current devices standard 家用和类似用途的剩余电流动作断路器 第1部分：剩余电流电器标准的独立模块和单元模块概述 |
China National Standards Lock |
English PDF |
| GB/T 37634-2019 |
Locksets—Test methods 锁具 测试方法 |
China National Standards Lock |
English PDF |
| GB/T 37462-2019 |
Locking threads with 30 degree wedge ramp 30°楔形防松螺纹 |
China National Standards Lock |
English PDF |
| GB/T 36920-2018 |
Locksets─Terminology 锁具-术语 |
China National Standards Lock |
English PDF |
| GB/T 36987-2018 |
Testing methods of anti Lock braking system(ABS) performance for automobiles 汽车防抱制动系统(ABS)性能检测方法 |
China National Standards Lock |
English PDF |
| GB/T 37157-2018 |
Safety of machinery—Evaluation of fault masking serial connection of interLocking devices with potential free contacts 机械安全-串联的无电势触点联锁装置故障掩蔽的评价 |
China National Standards Lock |
English PDF |
| GB/T 37600.6-2018 |
National central product classification—Product category core metadata—Part 6: CLock and watch 全国主要产品分类-产品类别核心元数据-第6部分：钟表 |
China National Standards Lock |
English PDF |
| GB/T 36224-2018 |
Inserts for aviation,self-Locking with MJ threads, open type, in aluminium alloy 航空用MJ螺纹铝合金通孔自锁镶嵌件 |
China National Standards Lock |
English PDF |
| GB/Z 21099.6-2018 |
Function bLocks(FB) for process control and electronic device description language(EDDL)—Part 6: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices 过程控制用功能块（FB）和电子设备描述语言（EDDL） 第6部分：满足现场设备工程工具对集成现场总线设备的需求 |
China National Standards Lock |
English PDF |
| GB/T 21099.3-2018 |
Function bLock(FB) for process control—Part 3: Electronic device description language(EDDL) 过程控制用功能块(FB) 第3部分：电子设备描述语言(EDDL) |
China National Standards Lock |
English PDF |
| GB/T 36153-2018 |
Aluminium alloy MJ threads inserts of self-Locking floating nut for aviation 航空用MJ螺纹铝合金带游动自锁螺母的镶嵌件 |
China National Standards Lock |
English PDF |
| GB/T 36515-2018 |
Concrete product machinery—Safety requirements for bLock making machines 混凝土制品机械 砌块成型机安全要求 |
China National Standards Lock |
English PDF |
| GB/T 36535-2018 |
Autoclaved fly ash hollow bricks and bLocks 蒸压粉煤灰空心砖和空心砌块 |
China National Standards Lock |
English PDF |
| GB/T 36253-2018 |
Inserts for aviation, self-Locking with MJ threads, closed type, in aluminium alloy 航空用MJ螺纹铝合金盲孔自锁镶嵌件 |
China National Standards Lock |
English PDF |
| GB/T 36534-2018 |
Foamed concrete bLocks filled with ceramsite 陶粒发泡混凝土砌块 |
China National Standards Lock |
English PDF |
| GB/T 7813-2018 |
Rolling bearings－Split type plummer bLock housings－Boundary dimensions 滚动轴承 剖分立式轴承座 外形尺寸 |
China National Standards Lock |
English PDF |
| GB/T 36600.6-2018 |
National central product classification—Product category core metadata—Part 6: CLock and watch 全国主要产品分类 产品类别核心元数据 第6部分：钟表 |
China National Standards Lock |
English PDF |
| GB/T 36873-2018 |
Code of practice for detection of avian leukosis infection in chicken pedigree breeder fLock 原种鸡群禽白血病净化检测规程 |
China National Standards Lock |
English PDF |
| GB/T 35910-2018 |
BLocking enzyme-linked immunosorbent assay for detecting the antibody to porcine circovirus type 2 猪圆环病毒2型阻断ELISA抗体检测方法 |
China National Standards Lock |
English PDF |
| GB/T 11313.39-2018 |
Radio frequency connectors—Part 39: Sectional specification for CQM series quick Lock RF connectors 射频连接器 第39部分:CQM系列快速锁紧射频连接器分规范 |
China National Standards Lock |
English PDF |
| GB/T 34633.1-2017 |
Plain bearings—Pedestal plain bearings—Part 1: Pillow bLocks 滑动轴承 壳体支撑滑动轴承 第1部分：座式滑动轴承 |
China National Standards Lock |
English PDF |
| GB/T 34729-2017 |
BLocking ELISA method to detect antibody against classical swine fever virus 猪瘟病毒阻断ELISA抗体检测方法 |
China National Standards Lock |
English PDF |
| GB/T 34722-2017 |
Surface decorated plywood and bLockboard with paper impregnated thermosetting resins 浸渍胶膜纸饰面胶合板和细木工板 |
China National Standards Lock |
English PDF |
| GB/T 34363-2017 |
Non-destructive testing—Test method for fabricating and checking aluminum alloy ultrasonic standard reference bLocks 无损检测 铝合金超声标准试块制作和校验方法 |
China National Standards Lock |
English PDF |
| GB/T 34151-2017 |
Stamping dies—Guide plates—U-and V-bLocks 冲模 导板 U形和V形块 |
China National Standards Lock |
English PDF |
| GB/T 34011-2017 |
Thermal insulation products for building applications—Determination of the pull-off resistance of external thermal insulation composite systems(ETICS)(foam bLock test) 建筑用绝热制品 外墙外保温系统抗拉脱性能的测定（泡沫块试验） |
China National Standards Lock |
English PDF |
| GB/T 9160.2-2017 |
Rolling bearings—Accessories—Part 2: Locknuts and locking devices 滚动轴承 附件 第2部分：锁紧螺母和锁紧装置 |
China National Standards Lock |
English PDF |
| GB/T 33727-2017 |
Analogue quartz cLocks—Fitting dimentions of movements to hands 指针式石英钟 机心与指针的配合尺寸 |
China National Standards Lock |
English PDF |
| GB/T 22779-2017 |
Liquid crystal displaying quartz cLocks 液晶式石英钟 |
China National Standards Lock |
English PDF |
| GB/T 33573-2017 |
General technical specification of reader of secure and smart Lock for container 集装箱安全智能锁阅读器通用技术规范 |
China National Standards Lock |
English PDF |
| GB/T 33579-2017 |
Safety of machinery—Control methods of hazardous energy—Lockout/Tagout 机械安全 危险能量控制方法 上锁/挂牌 |
China National Standards Lock |
English PDF |
| GB/T 14048.22-2017 |
Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal bLocks for copper conductors 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排 |
China National Standards Lock |
English PDF |
| GB/T 18831-2017 |
Safety of machinery—InterLocking devices associated with guards—Principles for design and selection 机械安全 与防护装置相关的联锁装置 设计和选择原则 |
China National Standards Lock |
English PDF |
| GB/T 35478-2017 |
Fastener—Steel bolts,screws and studs with polyamide Locking pre-coating technical specification 紧固件 螺栓、螺钉和螺柱预涂聚酰胺锁紧层技术条件 |
China National Standards Lock |
English PDF |
| GB/T 33290.12-2016 |
Specification for inspecting exit cultural relics—Part 12: CLock and watch 文物出境审核规范 第12部分：钟表 |
China National Standards Lock |
English PDF |
| GB/T 4341.3-2016 |
Metallic materials—Shore hardness test—Part 3: Calibration of reference bLocks 金属材料 肖氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 5849-2016 |
BLockboards and battenboards 细木工板 |
China National Standards Lock |
English PDF |
| GB/T 32851-2016 |
Requirements on air cargo transport services of space bLocked and aircraft ULD （container and pallet）chartered for international freight forwarders 国际货运代理包舱、包航空集装器（集装箱、集装板）运输服务质量要求 |
China National Standards Lock |
English PDF |
| GB/T 32907-2016 |
Information security technology—SM4 bLock cipher algorthm 信息安全技术 SM4分组密码算法 |
China National Standards Lock |
English PDF |
| GB/T 32660.3-2016 |
Metallic materials—Webster hardness test—Part 3: Calibration of reference bLocks 金属材料 韦氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 32600.1-2016 |
Textile machinery and accessories—Main dimensions for section wires for metallic card clothing—Part 1: Foot without interLocking or interchainning 纺织机械与附件 梳理机用金属针布齿条截面主要尺寸 第1部分：普通基部 |
China National Standards Lock |
English PDF |
| GB/T 14048.8-2016 |
Low-voltage switchgear and controlgear—Part 7-2: Ancillary equipment—Protective conductor terminal bLocks for copper conductors 低压开关设备和控制设备 第7-2部分：辅助器件 铜导体的保护导体接线端子排 |
China National Standards Lock |
English PDF |
| GB/T 6046-2016 |
Analogue quartz cLocks 指针式石英钟 |
China National Standards Lock |
English PDF |
| GB/T 20408-2016 |
Radio-controlled analogue cLocks 指针式电波钟 |
China National Standards Lock |
English PDF |
| GB/T 14048.7-2016 |
Low-voltage switchgear and controlgear—Part 7-1：Ancillary equipment—Terminal bLocks for copper conductors 低压开关设备和控制设备 第7-1部分：辅助器件 铜导体的接线端子排 |
China National Standards Lock |
English PDF |
| GB/T 14048.18-2016 |
Low-voltage switchgear and controlgear—Part 7-3: Ancillary equipment—Safety requirements for fuse terminal bLocks 低压开关设备和控制设备 第7-3部分：辅助器件 熔断器接线端子排的安全要求 |
China National Standards Lock |
English PDF |
| GB/T 11313.29-2015 |
Radio frequency connectors—Part 29: Sectional specification for miniature radio frequency coaxial connector(type 1.0/2.3)with screw, snap-on, push-pull or quick-Lock,slide-in （rack and panel applications）mechanism with characteristic impedance 50Ω 射频连接器 第29部分：50Ω和75Ω用特性阻抗为50Ω、具有螺纹、推拉、快锁或滑轨式机架或面板用小型射频同轴连接器（1.0/2.3型）分规范 |
China National Standards Lock |
English PDF |
| GB/T 21410-2015 |
Petroleum and netural gas industries—Downhole equipment—Lock mandrels and landing nipples 石油天然气工业 井下设备 锁定心轴和定位接头 |
China National Standards Lock |
English PDF |
| GB/T 21099.2-2015 |
Function bLocks(FB) for process control—Part 2: Specification of FB concept 过程控制用功能块（FB） 第2部分：功能块概念规范 |
China National Standards Lock |
English PDF |
| GB/T 19769.4-2015 |
Function bLock—Part 4: Rules for compliance profiles 功能块 第4部分：一致性行规指南 |
China National Standards Lock |
English PDF |
| GB/T 19769.2-2015 |
Function bLocks—Part 2: Software tools requirements 功能块 第2部分：软件工具要求 |
China National Standards Lock |
English PDF |
| GB/T 19769.1-2015 |
Function bLocks—Part 1: Architecture 功能块 第1部分：结构 |
China National Standards Lock |
English PDF |
| GB/T 26643.3-2015 |
Non-destructive testing—Infrared flash thermography—Part 3: BLocks 无损检测 闪光灯激励红外热像法 第3部分：试块 |
China National Standards Lock |
English PDF |
| GB/T 19799.1-2015 |
Non-destructive testing—Ultrasonic testing—Specification for calibration bLock No. 1 无损检测 超声检测 1号校准试块 |
China National Standards Lock |
English PDF |
| GB/T 11259-2015 |
Non-destructive testing—Practice for fabrication and control of steel reference bLocks used in ultrasonic testing 无损检测 超声检测用钢参考试块的制作和控制方法 |
China National Standards Lock |
English PDF |
| GB/T 11313.8-2015 |
Radio-frequency connectors—Part 8: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet Lock—Characteristic impedance 50Ω（75Ω）(type BNC) 射频连接器 第8部分：外导体内径为6.5mm(0.256in)、特性阻抗为50Ω（75Ω）、卡口连接的射频同轴连接器（BNC型）分规范 |
China National Standards Lock |
English PDF |
| GB 25324-2014 |
The norm of energy consumption for cathode carbon bLock for aluminium eletrolyzation 铝电解用石墨质阴极炭块单位产品能源消耗限额 |
China National Standards Lock |
English PDF |
| GB/T 13545-2014 |
Fired hollow bricks and bLocks 烧结空心砖和空心砌块 |
China National Standards Lock |
English PDF |
| GB/T 11918.4-2014 |
Plugs, socket-outlets and couplers for industrial purposes―Part 4: Switched socket-outlets and connectors with or without interLock 工业用插头插座和耦合器 第4部分：有或无联锁带开关的插座和连接器 |
China National Standards Lock |
English PDF |
| GB/T 8239-2014 |
Normal concrete small bLock 普通混凝土小型砌块 |
China National Standards Lock |
English PDF |
| GB/T 30416-2013 |
Technical specifications for cLocks and watches after-sale repair service 钟表售后维修服务技术规范 |
China National Standards Lock |
English PDF |
| GB/T 4111-2013 |
Test methods for the concrete bLock & brick 混凝土砌块和砖试验方法 |
China National Standards Lock |
English PDF |
| GB 30051-2013 |
General technical requirements for push-bar emergency exit Locks 推闩式逃生门锁通用技术要求 |
China National Standards Lock |
English PDF |
| GB 15086-2013 |
Motor vehicles’ door Locks and retention components performance requirements and test methods 汽车门锁及车门保持件的性能要求和试验方法 |
China National Standards Lock |
English PDF |
| GB/T 29752-2013 |
General technical specification of secure and smart Lock for containers 集装箱安全智能锁通用技术规范 |
China National Standards Lock |
English PDF |
| GB/T 29062-2012 |
Autoclaved foam concrete bricks and bLocks 蒸压泡沫混凝土砖和砌块 |
China National Standards Lock |
English PDF |
| GB/T 29060-2012 |
The bricks & bLocks composited insulation materials 复合保温砖和复合保温砌块 |
China National Standards Lock |
English PDF |
| GB/T 4340.3-2012 |
Metallic materials - Vickers hardness test - Part 3：Calibration of reference bLocks 金属材料 维氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 231.3-2012 |
Metallic materials - Brinell hardness test - Part 3: Calibration of reference bLocks 金属材料 布氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 230.3-2012 |
Metallic materials - Rockwell hardness test - Part 3：Calibration of reference bLocks(scales A,B,C,D,E,F,G,H,K,N,T) 金属材料 洛氏硬度试验 第3部分：标准硬度块（A、B、C、D、E、F、G、H、K、N、T标尺）的标定 |
China National Standards Lock |
English PDF |
| GB/T 18449.3-2012 |
Metallic materials - Knoop hardness test - Part 3：Calibration of reference bLocks 金属材料 努氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 17394.3-2012 |
Metallic materials - Leeb hardness test - Part 3: Calibration of reference bLocks 金属材料 里氏硬度试验 第3部分：标准硬度块的标定 |
China National Standards Lock |
English PDF |
| GB/T 28701-2012 |
Locking assemblies 胀紧联结套 |
China National Standards Lock |
English PDF |
| GB/T 19799.2-2012 |
Non-destructive testing - Ultrasonic testing - Specification for calibration bLock No.2 无损检测 超声检测 2号校准试块 |
China National Standards Lock |
English PDF |
| GB/T 19769.3-2012 |
Function bLock for industrial-process measurement and control systems - Part 3：Tutorial information 工业过程测量和控制系统用功能块 第3部分：指导信息 |
China National Standards Lock |
English PDF |
| GB/T 15229-2011 |
Lightweight aggregate concrete small hollow bLock 轻集料混凝土小型空心砌块 |
China National Standards Lock |
English PDF |
| GB/T 27561-2011 |
Styrene-butadiene-styrene bLock copolymers（SBS）adhesives 苯乙烯-丁二烯-苯乙烯嵌段共聚物（SBS）胶粘剂 |
China National Standards Lock |
English PDF |
| GB/T 26796.4-2011 |
EPA specification for use in industrial measurement and control system - Part 4: Function bLock technical specification 用于工业测量与控制系统的EPA规范 第4部分：功能块的技术规范 |
China National Standards Lock |
English PDF |
| GB 26538-2011 |
Fired heat preservation brick and bLock 烧结保温砖和保温砌块 |
China National Standards Lock |
English PDF |
| GB 13544-2011 |
Fired perforated bricks and bLock 烧结多孔砖和多孔砌块 |
China National Standards Lock |
English PDF |
| GB/T 5559-2010 |
Non-ionic surface active agents obtained from ethylene oxide and ethylene oxide/propylene oxide bLock copolymers - Determination of cloud point 环氧乙烷型及环氧乙烷-环氧丙烷嵌段聚合型非离子表面活性剂 浊点的测定 |
China National Standards Lock |
English PDF |
| GB/T 3849.2-2010 |
Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test bLocks 硬质合金 洛氏硬度试验（A标尺） 第2部分：标准试块的制备和校准 |
China National Standards Lock |
English PDF |
| GB/T 26297.1-2010 |
Sampling of carbonaceous materials used for aluminium production - Part 1: Cathode bLocks 铝用炭素材料取样方法 第1部分：底部炭块 |
China National Standards Lock |
English PDF |
| GB/T 26295-2010 |
Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode bLocks - Determination of flexural strength by the four-point method 铝电解用炭素材料 预焙阳极和阴极炭块 四点法测定抗折强度 |
China National Standards Lock |
English PDF |
| GB/T 26297.3-2010 |
Sampling of carbonaceous materials used for aluminium production - Part 3: Prebaked bLocks 铝用炭素材料取样方法 第3部分：预焙阳极 |
China National Standards Lock |
English PDF |
| GB/T 26297.2-2010 |
Sampling of carbonaceous materials used for aluminium production - Part 2: Sidewall bLocks 铝用炭素材料取样方法 第2部分：侧部炭块 |
China National Standards Lock |
English PDF |
| GB/T 21099.4-2010 |
Function bLocks (FB) for process control - Part 4：EDD interoperability guideline 过程控制用功能块(FB) 第4部分：EDD互操作指南 |
China National Standards Lock |
English PDF |
| GB/T 21099.3-2010 |
Function bLock (FB) for process control - Part 3：Electronic device description language (EDDL) 过程控制用功能块(FB) 第3部分：电子设备描述语言(EDDL) |
China National Standards Lock |
English PDF |
| GB/T 19283-2010 |
Dimensions series of container ship passing the Lock of Three Gorges Dam 三峡枢纽过坝集装箱船主尺度系列 |
China National Standards Lock |
English PDF |
| GB/T 18181-2010 |
Dimensions series of cargo carrier(train) passing the Lock of Three Gorges Dam 三峡枢纽过坝货船(队)尺度系列 |
China National Standards Lock |
English PDF |
| GB/T 25931-2010 |
Precision cLock synchronization protocol for networked measurement and control systems 网络测量和控制系统的精确时钟同步协议 |
China National Standards Lock |
English PDF |
| GB/T 25750-2010 |
Lockable gas spring technical specification 可锁定气弹簧技术条件 |
China National Standards Lock |
English PDF |
| GB/T 25457-2010 |
Piano pin bLock 钢琴弦轴板 |
China National Standards Lock |
English PDF |
| GB/T 25318-2010 |
Locking devices for ball and socket couplings of string insulator units：Dimensions and tests. 绝缘子串元件球窝联接用锁紧销：尺寸和试验 |
China National Standards Lock |
English PDF |
| GB/T 25293-2010 |
Mechanical door Lock for cabinets of electrotechnical and electronic equipment 电工电子设备机柜 机械门锁 |
China National Standards Lock |
English PDF |
| GB/T 25234-2010 |
Grain and oil machinery - Impeller airLock 粮油机械 叶轮闭风器 |
China National Standards Lock |
English PDF |
| GB/T 24975.7-2010 |
Guide of environmental design for low-voltage apparatus - Part 7: Terminal bLocks 低压电器环境设计导则 第7部分：接线端子 |
China National Standards Lock |
English PDF |
| GB/T 18831-2010 |
Safety of machinery - InterLocking devices associated with guards - Principles for design and selection 机械安全 带防护装置的联锁装置设计和选择原则 |
China National Standards Lock |
English PDF |
| GB/T 24763-2009 |
Steel slag for foamed concrete bLocks 泡沫混凝土砌块用钢渣 |
China National Standards Lock |
English PDF |
| GB/T 23982-2009 |
Test method for bLock resistance of wood coatings 木器涂料抗粘连性测定法 |
China National Standards Lock |
English PDF |
| GB/T 23911-2009 |
Non-destructive testing - BLocks for penetrant testing 无损检测 渗透检测用试块 |
China National Standards Lock |
English PDF |
| GB/T 23905-2009 |
Non-destructive testing - BLocks for ultrasonic testing 无损检测 超声检测用试块 |
China National Standards Lock |
English PDF |
| GB/T 15566.10-2009 |
Guidance system for public information - Setting principles and requirements - Part 10: Street bLocks 公共信息导向系统 设置原则与要求 第10部分：街区 |
China National Standards Lock |
English PDF |
| GB/T 14395-2009 |
Coding rules for urban geographical features - City roads, road intersections, bLocks and municipal pipe lines 城市地理要素编码规则 城市道路、道路交叉口、街坊、市政工程管线 |
China National Standards Lock |
English PDF |
| GB/T 23561.3-2009 |
Methods for determining the physical and mechanical properties of coal and rock - Part 3: Methods for determining the bLock density of coal and rock 煤和岩石物理力学性质测定方法 第3部分：煤和岩石块体密度测定方法 |
China National Standards Lock |
English PDF |
| GB/T 23433-2009 |
Dimensions series of roll-on/roll-off truck ship passing the Lock of the three gorges dam 三峡枢纽过坝载货汽车滚装船船型尺度系列 |
China National Standards Lock |
English PDF |
| GB/T 23432-2009 |
Dimensions series of river/coastal cargo ship passing the Lock of three gorges dam 三峡枢纽过坝江海直达货船尺度系列 |
China National Standards Lock |
English PDF |
| GB/T 13217.8-2009 |
Test method for bLocking resistance of liquid ink 液体油墨抗粘连检验方法 |
China National Standards Lock |
English PDF |
| GB 2099.5-2008 |
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets with interLock for fixed installations 家用和类似用途插头插座 第2部分：固定式有联锁带开关插座的特殊要求 |
China National Standards Lock |
English PDF |
| GB 2099.4-2008 |
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for switched socket-outlets without interLock for fixed installations 家用和类似用途插头插座 第2部分：固定式无联锁带开关插座的特殊要求 |
China National Standards Lock |
English PDF |
| GB 14536.13-2008 |
Automatic electrical controls for household and similar use - Particular requirements for electrically operated door Locks 家用和类似用途电自动控制器 电动门锁的特殊要求 |
China National Standards Lock |
English PDF |
| GB/T 14048.18-2008 |
Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal bLocks 低压开关设备和控制设备 第7-3部分：辅助器件 熔断器接线端子排的安全要求 |
China National Standards Lock |
English PDF |
| GB/T 22779-2008 |
Liquid crystal displaying quartz cLocks 液晶式石英钟 |
China National Standards Lock |
English PDF |
| GB/T 22774-2008 |
Mechanical alarm cLocks 机械闹钟 |
China National Standards Lock |
English PDF |
| GB/T 22772-2008 |
Mechanical cLocks with pendulum 机械摆钟 |
China National Standards Lock |
English PDF |
| GB 4706.70-2008 |
Safety of household and similar electrical appliances - Particular requirements for cLocks 家用和类似用途电器的安全 时钟的特殊要求 |
China National Standards Lock |
English PDF |
| GB/T 22521-2008 |
Angle bLock gauge 角度量块 |
China National Standards Lock |
English PDF |
| GB/T 16712-2008 |
Characteristics of synchronous digital hierarchy (SDH) equipment functional bLocks 同步数字体系（SDH）设备功能块特性 |
China National Standards Lock |
English PDF |
| GB/T 15838-2008 |
Test methods for the performances of switching equipment cLocks in digital network 数字网中交换设备时钟性能测试方法 |
China National Standards Lock |
English PDF |
| GB/T 18851.3-2008 |
Non-destructive testing - Penetrant testing - Part 3: Reference test bLocks 无损检测 渗透检测 第3部分：参考试块 |
China National Standards Lock |
English PDF |
| GB/T 22356-2008 |
Earth-moving machinery - Key-Locked starting systems 土方机械 钥匙锁起动系统 |
China National Standards Lock |
English PDF |
| GB/T 22355-2008 |
Earth-moving machinery - Articulated frame Lock - Performance requirements 土方机械 铰接机架锁紧装置 性能要求 |
China National Standards Lock |
English PDF |
| GB/T 94.1-2008 |
Specification for spring washers - Single coil Lock washers 弹性垫圈技术条件 弹簧垫圈 |
China National Standards Lock |
English PDF |
| GB/T 11259-2008 |
Non-destructive testing - Practice for fabrication and control of steel reference bLocks used in ultrasonic testing 无损检测 超声检测用钢参考试块的制作与检验方法 |
China National Standards Lock |
English PDF |
| GB/T 8533-2008 |
Small bLock machine 小型砌块成型机 |
China National Standards Lock |
English PDF |
| GB/T 15852.1-2008 |
Information technology - Security techniques - Message Authentication Codes(MACs) - Part 1: Mechanisms using a bLock cipher 信息技术 安全技术 消息鉴别码 第1部分：采用分组密码的机制 |
China National Standards Lock |
English PDF |
| GB/T 10609.1-2008 |
Technical drawings - Title bLocks 技术制图 标题栏 |
China National Standards Lock |
English PDF |
| GB/T 17964-2008 |
Information technology - Security Techniques - Modes of operation for a bLock cipher 信息安全技术 分组密码算法的工作模式 |
China National Standards Lock |
English PDF |
| GB/T 21838.3-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference bLocks 金属材料 硬度和材料参数的仪器化压痕试验 第3部分: 标准块的标定 |
China National Standards Lock |
English PDF |
| GB/T 3612-2008 |
Cemented carbide blanks for gauge bLocks or measuring tools 量规、量具用硬质合金毛坯 |
China National Standards Lock |
English PDF |
| GB/T 11880-2008 |
Specification of large die-bLocks used for die-forging hammer and mechanical forging press 模锻锤和大型机械锻压机用模块技术条件 |
China National Standards Lock |
English PDF |
| Find out:296Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
