Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 269-2023 |
Test method for penetration of Lubricating grease and petroleum grease {译} 润滑脂和石油脂锥入度测定法 |
China National Standards Lubricating |
English PDF |
GB/T 17476-2023 |
Determination of Multiple Elements in Lubricating Oils and Base Oils by Inductively Coupled Plasma Emission Spectrometry {译} 润滑油和基础油中多种元素的测定 电感耦合等离子体发射光谱法 |
China National Standards Lubricating |
English PDF |
GB/T 41961-2022 |
Disposal method of waste mineral oil Lubricating oil {译} 废矿物油类润滑油处理处置方法 |
China National Standards Lubricating |
English PDF |
GB/T 8243.12-2021 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines—Part 12: Filtration efficiency using particle counting and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:颗粒计数法滤清效率和容灰量 |
China National Standards Lubricating |
English PDF |
GB/T 9142-2021 |
Specification of plastic-steel bilayer self-Lubricating materials—Part 1:Running-in layer with modified PTFE tape 建筑施工机械与设备 混凝土搅拌机 |
China National Standards Lubricating |
English PDF |
GB/T 39142.1-2020 |
Specification of plastic-steel bilayer self-Lubricating materials—Part 1:Running-in layer with modified PTFE tape 塑料-钢背二层粘接复合自润滑板材技术条件 第1部分:带改性聚四氟乙烯(PTFE)减摩层的板材 |
China National Standards Lubricating |
English PDF |
GB/T 8243.14-2020 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines—Part 14:Cold start simulation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法 第14部分:复合材料滤清器的冷起动模拟和液压脉冲耐久试验 |
China National Standards Lubricating |
English PDF |
GB/T 36990-2018 |
Classification of automotive service Lubricating greases 车用润滑脂分类 |
China National Standards Lubricating |
English PDF |
GB/T 8243.5-2018 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines—Part 5: Test for cold start simulation and hydraulic pulse durability 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验 |
China National Standards Lubricating |
English PDF |
GB/T 8243.15-2018 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines—Part 15: Vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分:复合材料滤清器的振动疲劳试验 |
China National Standards Lubricating |
English PDF |
GB/T 8243.7-2017 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines—Part 7:Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验 |
China National Standards Lubricating |
English PDF |
GB/T 8243.6-2017 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines—Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验 |
China National Standards Lubricating |
English PDF |
GB/T 11133-2015 |
Standard test method for determination of water in petroleum products, Lubricating oils and additives—Coulometric Karl Fischer titration method 石油产品、润滑油和添加剂中水含量的测定 卡尔费休库仑滴定法 |
China National Standards Lubricating |
English PDF |
GB/T 8243.13-2015 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines—Part 13: Static burst pressure test for composite filter housings 内燃机全流式机油滤清器试验方法 第13部分:复合材料滤清器的静压耐破度试验 |
China National Standards Lubricating |
English PDF |
GB/T 31210.2-2014 |
Green manufacturing—Near dry cutting—Part 2: Technical requirements for minimum quantity Lubricating system 绿色制造 亚干式切削 第2部分:微量润滑系统技术要求 |
China National Standards Lubricating |
English PDF |
GB/T 5671-2014 |
General purpose lithium Lubricating grease for automobile 汽车通用锂基润滑脂 |
China National Standards Lubricating |
English PDF |
GB/T 30507-2014 |
Ships and marine technology―Lubricating and hydraulic oil systems―Guidance for sampling to determine cleanliness and particle contamination 船舶和海上技术 润滑油系统和液压油系统 颗粒污染物取样和清洁度判定导则 |
China National Standards Lubricating |
English PDF |
GB/T 30506-2014 |
Ships and marine technology―Lubricating oil systems―Guidance for grades of cleanliness and flushing 船舶和海上技术 润滑油系统 清洁度等级和冲洗导则 |
China National Standards Lubricating |
English PDF |
GB/T 28954-2012 |
Automotive engines - Spin-on filters for Lubricating oil - Connect dimensions 汽车发动机 旋装式机油滤清器 连接尺寸 |
China National Standards Lubricating |
English PDF |
GB/T 8926-2012 |
Standard test method for insolubles in used Lubricating oils 在用的润滑油不溶物测定法 |
China National Standards Lubricating |
English PDF |
GB/T 8243.9-2012 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests 内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验 |
China National Standards Lubricating |
English PDF |
GB 11120-2011 |
Lubricating oils for turbines 涡轮机油 |
China National Standards Lubricating |
English PDF |
GB/T 27553.2-2011 |
Specification of plastics-bronze-steel backing triplelayer self-Lubricating materials - Part 2:plastic overlay with modified POM 塑料-青铜-钢背三层复合自润滑板材技术条件 第2部分:带改性聚甲醛(POM)减摩层的板材 |
China National Standards Lubricating |
English PDF |
GB/T 27553.1-2011 |
Specification of Plastics-Bronze-steel backing triplelayer self-Lubricating materials - Part 1:plastic overlay with modified PTFE 塑料-青铜-钢背三层复合自润滑板材技术条件 第1部分:带改性聚四氟乙烯(PTFE)减摩层的板材 |
China National Standards Lubricating |
English PDF |
GB 50730-2011 |
Code for construction of metallurgical mechanical hydraulic,Lubricating and dynamic equipment engineering 冶金机械液压、润滑和气动设备工程施工规范 |
China National Standards Lubricating |
English PDF |
GB/T 1156-2011 |
Sleeve type drip-feed Lubricating cups 旋套式注油油杯 |
China National Standards Lubricating |
English PDF |
GB/T 7324-2010 |
General purpose lithium Lubricating grease 通用锂基润滑脂 |
China National Standards Lubricating |
English PDF |
GB/T 6809.6-2009 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems 往复式内燃机 零部件和系统术语 第6部分:润滑系统 |
China National Standards Lubricating |
English PDF |
GB/T 14363-2009 |
Measure method of Lubricating oil consumption for diesel engines 柴油机机油消耗测定方法 |
China National Standards Lubricating |
English PDF |
GB/T 6403.2-2008 |
Lubricating grooves 润滑槽 |
China National Standards Lubricating |
English PDF |
GB/T 7323-2008 |
Extreme pressure lithium Lubricating grease 极压锂基润滑脂 |
China National Standards Lubricating |
English PDF |
GB/T 491-2008 |
Calcium Lubricating grease 钙基润滑脂 |
China National Standards Lubricating |
English PDF |
GB/T 3498-2008 |
Petrolum products - Determination of dropping point of Lubricating greases (wide temperature range ) 润滑脂宽温度范围滴点测定法 |
China National Standards Lubricating |
English PDF |
GB/T 5018-2008 |
Standard test method for determining corrosion preventive properties of Lubricating greases 润滑脂防腐蚀性试验法 |
China National Standards Lubricating |
English PDF |
GB/T 6072.1-2008 |
Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and Lubricating oil consumptions, and test methods - Additional requirements for engines for general use 往复式内燃机 性能 第1部分:功率、燃料消耗和机油消耗的标定及试验方法 通用发动机的附加要求 |
China National Standards Lubricating |
English PDF |
GB/T 11144-2007 |
Standard test method for measurement of extreme-perssure prosperties of Lubricating fluids - Timken method 润滑液极压性能测定法 梯姆肯法 |
China National Standards Lubricating |
English PDF |
GB/T 8243.12-2007 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分:采用颗粒计数法测定滤清效率和容灰量 |
China National Standards Lubricating |
English PDF |
GB/T 8243.11-2007 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法 第11部分:自净式滤清器 |
China National Standards Lubricating |
English PDF |
GB/T 8243.7-2006 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验 |
China National Standards Lubricating |
English PDF |
GB/T 8243.6-2006 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test 内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验 |
China National Standards Lubricating |
English PDF |
GB/T 8243.5-2006 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test 内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验 |
China National Standards Lubricating |
English PDF |
GB/T 5822.2-2004 |
Test method of petroleum ether insolubles in Lubricating oil for railway locomotive diesel engine 铁路内燃机车柴油机油 石油醚不溶物测定方法 |
China National Standards Lubricating |
English PDF |
GB/T 8243.4-2003 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines--Part 4: Initial particle retention efficiency,life and cumulative efficiency(gravimetric method) 内燃机全流式机油滤清器试验方法 第4部分: 原始滤清效率、寿命和累积效率(重量法) |
China National Standards Lubricating |
English PDF |
GB/T 8243.3-2003 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines--Part 3: Resistance to high differential pressure and to elevated temperature 内燃机全流式机油滤清器试验方法 第3部分: 耐高压差和耐高温特性 |
China National Standards Lubricating |
English PDF |
GB/T 8243.2-2003 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines--Part 2: Element by-pass valve characteristics 内燃机全流式机油滤清器试验方法 第2部分: 滤芯旁通阀特性 |
China National Standards Lubricating |
English PDF |
GB/T 8243.1-2003 |
Methods of test for full-flow Lubricating oil filters for internal combustion engines--Part 1: Differential pressure/flow characteristics 内燃机全流式机油滤清器试验方法 第1部分:压差-流量特性 |
China National Standards Lubricating |
English PDF |
GB/T 12579-2002 |
Determination of foaming characteristics of Lubricating oils 润滑油泡沫特性测定法 |
China National Standards Lubricating |
English PDF |
GB/T 2433-2001 |
Petroleum products--Lubricatingoils and additives--Determination of sulphated ash 添加剂和含添加剂润滑油硫酸盐灰分测定法 |
China National Standards Lubricating |
English PDF |
GB/T 12583-1998 |
Standard test method for measurement of extreme-pressure properties of Lubricating fluids(four-ball method) 润滑剂极压性能测定法(四球法) |
China National Standards Lubricating |
English PDF |
GB 15179-1994 |
Food machinery Lubricating grease 食品机械润滑脂 |
China National Standards Lubricating |
English PDF |
GB/T 269-1991 |
Lubricating grease and petrolatum--Determination of cone penetration 润滑脂和石油脂锥入度测定法 |
China National Standards Lubricating |
English PDF |
GB/T 12709-1991 |
Lubricating oils--Determination of aging characteristics--Conradson carbon residue method 润滑油老化特性测定法 (康氏残炭法) |
China National Standards Lubricating |
English PDF |
GB 439-1990 |
Aviation jet engine Lubricating oils 航空喷气机润滑油 |
China National Standards Lubricating |
English PDF |
GB/T 12578-1990 |
Lubricating oils--Determination of flow ability--U-tube method 润滑油流动性测定法 (U 形管法) |
China National Standards Lubricating |
English PDF |
GB/T 492-1989 |
Sodium base Lubricating grease 钠基润滑脂 |
China National Standards Lubricating |
English PDF |
GB 443-1989 |
Lubricating oils for total loss systems L-AN L-AN全损耗系统用油 |
China National Standards Lubricating |
English PDF |
GB/T 9170-1988 |
Lubricating oils and fueloils--Determination of total nitrogen--Modified Kjeldahl method 润滑油及燃料油中总氮含量测定法(改进的克氏法) |
China National Standards Lubricating |
English PDF |
GB/T 8022-1987 |
Lubricating oils--Determination of demulsibility characteristics 润滑油抗乳化性能测定法 |
China National Standards Lubricating |
English PDF |
GB/T 7326-1987 |
Lubricating grease--Corrosiveness to copper--Copper strip test 润滑脂铜片腐蚀试验法 |
China National Standards Lubricating |
English PDF |
GB/T 7325-1987 |
Petroleum products--Lubricating greases and oils--Determination of evaporation loss 润滑脂和润滑油蒸发损失测定法 |
China National Standards Lubricating |
English PDF |
GB/T 4929-1985 |
Lubricating grease--Determination of dropping point 润滑脂滴点测定法 |
China National Standards Lubricating |
English PDF |
GB 440-1977 |
Aviation Lubricating oil No.20 20号航空润滑油 |
China National Standards Lubricating |
English PDF |
GB/T 392-1977 |
Determination of colloid-stability of Lubricating greases 润滑脂压力分油测定法 |
China National Standards Lubricating |
English PDF |
GB/T 391-1977 |
Determination of corrosion of engine Lubricating oils 发动机润滑油腐蚀度测定法 |
China National Standards Lubricating |
English PDF |
GB/T 513-1977 |
Determination of mechanical impuritiesin Lubricating greases (acid decomposition method) 润滑脂机械杂质测定法 (酸分解法) |
China National Standards Lubricating |
English PDF |
GB/T 512-1965 |
Determination of water content in Lubricating greases 润滑脂水分测定法 |
China National Standards Lubricating |
English PDF |
Find out:66Items | To Page of: First -Previous-Next -Last | 1 |