China National Standards

China Plastics—Determination GB Standards List


  •  China "Plastics—Determination" GB Standards List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 40611-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface—Method by measuring the oxygen demand in closed respirometer
    塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定密闭呼吸计内耗氧量的方法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 40384-2021 Plastics—Determination of the transient extensional viscosity of polymer melts
    塑料 聚合物熔体瞬态拉伸黏度的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 40367-2021 Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide
    塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 40302-2021 Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
    塑料 立式软薄试样与小火焰源接触的燃烧性能测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 15596-2021 Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
    塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 2408-2021 Plastics—Determination of burning characteristics—Horizontal and vertical test
    塑料 燃烧性能的测定 水平法和垂直法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 40612-2021 Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide
    塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 39822-2021 Plastics—Determination of yellowness index and change in yellowness index
    塑料 黄色指数及其变化值的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 39821-2021 Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel
    塑料 不能从规定漏斗流出的模塑材料表观密度的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 24282-2021 Plastics—Determination of xylene-soluble matter fraction in polypropylene
    塑料 聚丙烯中二甲苯可溶物含量的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 8813-2020 Rigid cellular Plastics—Determination of compression properties
    硬质泡沫塑料 压缩性能的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 38737-2020 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production
    塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 1632.4-2020 Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials
    塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分:聚碳酸酯(PC)模塑和挤出材料
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 39691-2020 Plastics—Determination of refractive index
    塑料 折光率的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 36805.2-2020 Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method
    塑料 高应变速率下的拉伸性能测定 第2部分:直接测试法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography
    塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯(PS-I)中残留苯乙烯单体含量的测定 气相色谱法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography
    塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯(PS-I)中残留苯乙烯单体含量的测定 气相色谱法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method
    塑料 负荷变形温度的测定 第1部分:通用试验方法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 1040.1-2018 Plastics—Determination of tensile properties—Part 1:General principles
    塑料-拉伸性能的测定-第1部分:总则
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
    塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分:光散射法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 36214.4-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method
    塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分:高温法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 36214.2-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method
    塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分:普适校正法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
    塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分:低温法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
    塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分:通则
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 36805.1-2018 Plastics—Determination of tensile properties at high strain rates—Part 1:Equation fitting method
    塑料 高应变速率下的拉伸性能测定 第1部分:方程拟合法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture
    塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第2部分:对时间-温度历史和(或)湿度敏感的材料的试验方法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 1043.2-2018 Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test
    塑料 简支梁冲击性能的测定 第2部分:仪器化冲击试验
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method
    塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分:标准方法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 33797-2017 Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas
    塑料 在高固体份堆肥条件下最终厌氧生物分解能力的测定 采用分析测定释放生物气体的方法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 12000-2017 Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist
    塑料 暴露于湿热、水喷雾和盐雾中影响的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 33388-2016 Plastics—Determination of phenolic resin compositions—Liquid chromatography
    塑料 酚醛树脂组分的测定 液相色谱法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 33061.1-2016 Plastics—Determination of dynamic mechanical properties—Part 1: General principles
    塑料 动态力学性能的测定 第1部分:通则
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 33061.10-2016 Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
    塑料 动态力学性能的测定 第10部分:使用平行平板振荡流变仪测定复数剪切黏度
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 32682-2016 Plastics—Determination of environment stress cracking (ESC) of polyethylene—Full-notch creep test (FNCT)
    塑料 聚乙烯环境应力开裂(ESC)的测定 全缺口蠕变试验(FNCT)
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 32683.1-2016 Plastics—Determination of viscosity using a falling-ball viscometer—Part 1: Inclined-tube method
    塑料 用落球黏度计测定黏度 第1部分:斜管法
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 32477-2016 Plastics—Determination of total chlorine content in toluene diisocyanates for use in the production of polyurethanes
    塑料 用于聚氨酯生产的甲苯二异氰酸酯中总氯含量的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 32471-2016 Plastics—Determination of the isomer ratio in toluene diisocyanates for use in the production of polyurethanes
    塑料 用于聚氨酯生产的甲苯二异氰酸酯异构比的测定
    China National Standards
    Plastics—Determination

    English PDF
    GB/T 32106-2015 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system—Method by measurement of biogas production
    塑料 在水性培养液中最终厌氧生物分解能力的测定 通过测量生物气体产物的方法
    China National Standards
    Plastics—Determination

    English PDF

    Find out:38Items   |  To Page of: First -Previous-Next -Last  | 1

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards