Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 15597.2-2024 |
Plastics - Polymethyl methacrylate (PMMA) - Molding and extrusion materials - Part 2: Preparation of specimens and performance determination {译} 塑料-聚甲基丙烯酸甲酯（PMMA）-模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
 English PDF |
| GB/T 43287-2023 |
Plastics Determination of the degree of disintegration of plastic materials in the marine environment under actual field conditions {译} 塑料 在实际野外条件海洋环境中塑料材料崩解度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43282.2-2023 |
Plastics. Determination of aerobic biodegradation of plastic materials exposed to seawater. Part 2: Method for determination of oxygen demand in a closed respirometer. {译} 塑料 暴露于海水中塑料材料需氧生物分解的测定 第2部分：采用测定密闭呼吸计内需氧量的方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43282.1-2023 |
Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. {译} 塑料 暴露于海水中塑料材料需氧生物分解的测定 第1部分：采用分析释放二氧化碳的方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43275-2023 |
Screening and determination of antimony, arsenic, barium, cadmium, chromium, lead, mercury and selenium in toy plastics by energy dispersive X-ray fluorescence spectrometry {译} 玩具塑料中锑、砷、钡、镉、铬、铅、汞、硒元素的筛选测定 能量色散X射线荧光光谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43355-2023 |
Determination of antiviral activity on surfaces of plastics and other non-porous materials {译} 塑料和其他无孔材料表面抗病毒活性的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43316.6-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 6: Slow strain rate method {译} 塑料 耐环境应力开裂(ESC)的测定 第6部分:慢应变速率法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43316.5-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 5: Constant tensile deformation method {译} 塑料 耐环境应力开裂(ESC)的测定 第5部分:恒定拉伸变形法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43316.4-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin pressure method {译} 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43316.3-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 3: Bending method {译} 塑料 耐环境应力开裂(ESC)的测定 第3部分:弯曲法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43316.2-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 2: Constant tensile load method {译} 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43316.1-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 1: General principles {译} 塑料 耐环境应力开裂(ESC)的测定 第1部分:通则 |
China National Standards Plastics Determination |
English PDF |
| GB/T 42918.2-2023 |
Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination {译} 塑料 模塑和挤出用热塑性聚氨酯 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 31402-2023 |
Determination of antimicrobial activity on surfaces of plastics and other non-porous materials {译} 塑料和其他无孔材料表面抗菌活性的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 21461.2-2023 |
Plastics Ultra-high molecular weight polyethylene (PE-UHMW) molding and extrusion materials Part 2: Specimen preparation and property determination {译} 塑料 超高分子量聚乙烯（PE-UHMW）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43086-2023 |
Plastics Polymer dispersions Determination of sieve residue {译} 塑料 聚合物分散体 筛余物的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43085-2023 |
Plastics Polymer dispersions Determination of free formaldehyde content {译} 塑料 聚合物分散体 游离甲醛含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 43084.2-2023 |
Plastics - Fluoropolymer dispersions, molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 含氟聚合物分散体、模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1630.2-2023 |
Plastics Epoxy resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins {译} 塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12598-2023 |
Plastics Ion exchange resin Determination of sphericity rate after grinding and sphericity rate after grinding {译} 塑料 离子交换树脂 渗磨圆球率和磨后圆球率的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 42924.4-2023 |
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 4: Dynamic decomposition method using a cone corrosion meter. {译} 塑料 烟雾产生 燃烧流腐蚀性的测定 第4部分:使用锥形腐蚀计的动态分解法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 42924.1-2023 |
Plastics. Smoke generation. Determination of corrosiveness of combustion streams. Part 1: General terminology and applications. {译} 塑料 烟雾产生 燃烧流腐蚀性的测定 第1部分:通用术语和应用 |
China National Standards Plastics Determination |
English PDF |
| GB/T 42922-2023 |
Plastics - Determination of organic solvent extractables - Chemical methods {译} 塑料 有机溶剂可萃取物的测定 化学方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 42919.6-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology {译} 塑料 导热系数和热扩散系数的测定 第6部分：基于温度调制技术的比较法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 42919.4-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method {译} 塑料 导热系数和热扩散系数的测定 第4部分:激光闪光法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 42919.3-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method {译} 塑料 导热系数和热扩散系数的测定 第3部分：温度波分析法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 42919.1-2023 |
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles {译} 塑料 导热系数和热扩散系数的测定 第1部分:通则 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33061.7-2023 |
Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method {译} 塑料 动态力学性能的测定 第7部分: 非共振扭转振动法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33061.6-2023 |
Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method {译} 塑料 动态力学性能的测定 第6部分：非共振剪切振动法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33061.5-2023 |
Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method {译} 塑料 动态力学性能的测定 第5部分：非共振弯曲振动法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33061.4-2023 |
Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method {译} 塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 7139-2023 |
Plastics. Homopolymers and copolymers of vinyl chloride. Determination of chlorine content. {译} 塑料 氯乙烯均聚物和共聚物 氯含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1040.2-2022 |
Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics {译} 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41639-2022 |
Plastics Determination of disintegration rate of plastic materials under laboratory-scale simulated composting conditions {译} 塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 2546.2-2022 |
Plastics - Polypropylene (PP) molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 聚丙烯(PP)模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 18743.2-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials {译} 热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件 |
China National Standards Plastics Determination |
English PDF |
| GB/T 18743.1-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods {译} 热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41489-2022 |
Plastics polyamide determination by gas chromatography ε- Caprolactam and ω- Dodecalactam {译} 塑料 聚酰胺 气相色谱法测定ε-己内酰胺和ω-十二内酰胺 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41926-2022 |
Plastics - Determination of 1,2-ethylene glycol content in epoxy resins {译} 塑料 环氧树脂 1,2-乙二醇含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41928-2022 |
Plastics epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) {译} 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41932-2022 |
Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) method {译} 塑料 断裂韧性（GIC和KIC）的测定 线弹性断裂力学（LEFM）法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41933-2022 |
Plastics - Determination of tension-tension fatigue crack growth - Linear elastic fracture mechanics (LEFM) method {译} 塑料 拉-拉疲劳裂纹扩展的测定 线弹性断裂力学(LEFM)法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41934-2022 |
Plastics - Determination of vertical flame spread of films and sheets {译} 塑料 薄膜和薄片垂直火焰蔓延的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards Plastics Determination |
English PDF |
| GB/T 11546.2-2022 |
Plastics - Determination of creep properties - Part 2: Three-point bending creep {译} 塑料 蠕变性能的测定 第2部分:三点弯曲蠕变 |
China National Standards Plastics Determination |
English PDF |
| GB/T 19466.5-2022 |
Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction curve temperature, time, enthalpy of reaction and conversion {译} 塑料 差示扫描量热法(DSC) 第5部分: 特征反应曲线温度、时间，反应焓和转化率的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41936.2-2022 |
Plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homopolymers and copolymers {译} 塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41936.1-2022 |
Plastics - Determination of torsional stiffness of flexible materials - Part 1: General method {译} 塑料 柔性材料扭转刚度的测定 第1部分:通用方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33061.11-2022 |
Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature {译} 塑料 动态力学性能的测定 第11部分: 玻璃化转变温度 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41937-2022 |
Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method {译} 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41792-2022 |
Plastics - Films and sheets - Determination of cold cracking temperature {译} 塑料制品 薄膜和薄片 冷裂温度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41709-2022 |
Carbon fiber reinforced plastics - Determination of size and aspect ratio of pulverized material {译} 碳纤维增强塑料 粉碎料尺寸和长宽比的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41877.2-2022 |
Plastics - Ethylene-vinyl alcohol (EVOH) copolymer molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41878-2022 |
Plastics - Determination of scratch properties {译} 塑料 划痕性能的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41880-2022 |
Plastics - epoxy resins - determination of electrical conductivity of aqueous extracts {译} 塑料 环氧树脂 水萃取液电导率的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 41758.2-2022 |
Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties {译} 塑料 聚酮（PK）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40611-2021 |
Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface—Method by measuring the oxygen demand in closed respirometer 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定密闭呼吸计内耗氧量的方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40384-2021 |
Plastics—Determination of the transient extensional viscosity of polymer melts 塑料 聚合物熔体瞬态拉伸黏度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40426.3-2021 |
Plastics—Decorative solid surfacing materials—Part 3:Determination of properties—Non-sheet solid surfacing material 塑料制品 装饰性实体面材 第3部分：性能的测定 非板型实体面材 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40426.2-2021 |
Plastics—Decorative solid surfacing materials—Part 2: Determination of properties—Sheet solid surfacing material 塑料制品 装饰性实体面材 第2部分：性能的测定 板型实体面材 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40367-2021 |
Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide 塑料 暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定 通过分析释放的二氧化碳的方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40302-2021 |
Plastics—Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source 塑料 立式软薄试样与小火焰源接触的燃烧性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40280-2021 |
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39715.4-2021 |
Plastics—Biobased content—Part 4: Determination of biobased mass content 塑料 生物基含量 第4部分：生物基物质含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39715.3-2021 |
Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content 塑料 生物基含量 第3部分：生物基合成聚合物含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39715.2-2021 |
Plastics—Biobased content—Part 2: Determination of biobased carbon content 塑料 生物基含量 第2部分：生物基碳含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33047.3-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33047.2-2021 |
Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy 塑料 聚合物热重法（TG） 第2部分：活化能的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 15596-2021 |
Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources 塑料 在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 2408-2021 |
Plastics—Determination of burning characteristics—Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1845.2-2021 |
Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40612-2021 |
Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface—Method by analysis of evolved carbon dioxide 塑料 海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定 通过测定释放二氧化碳的方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39935-2021 |
Plastics—Film and sheeting—Determination of blocking resistance 塑料制品 薄膜和片材 抗粘连性的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39934-2021 |
Plastics—Film and sheeting—Determination of blocking resistance 家具中挥发性有机化合物的筛查检测方法 气相色谱-质谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39827.2-2021 |
Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39822-2021 |
Plastics—Determination of yellowness index and change in yellowness index 塑料 黄色指数及其变化值的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39821-2021 |
Plastics—Determination of apparent density of moulding material that cannot be poured from a specified funnel 塑料 不能从规定漏斗流出的模塑材料表观密度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39818-2021 |
Plastics—Thermosetting moulding materials—Determination of shrinkage 塑料 热固性模塑材料 收缩率的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 10006-2021 |
Plastics—Film and sheeting—Determination of the coefficients of friction 塑料 薄膜和薄片 摩擦系数的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 24282-2021 |
Plastics—Determination of xylene-soluble matter fraction in polypropylene 塑料 聚丙烯中二甲苯可溶物含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 40726-2021 |
Rubber-or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles 橡胶或塑料涂覆织物 汽车内饰材料雾化性能的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 30314-2021 |
Rubber- or plastics-coated fabrics—Determination of abrasion resistance—Taber abrader 橡胶或塑料涂覆织物 耐磨性的测定 泰伯法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 8813-2020 |
Rigid cellular plastics—Determination of compression properties 硬质泡沫塑料 压缩性能的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 38737-2020 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39714.2-2020 |
Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39690.2-2020 |
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1632.4-2020 |
Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39691-2020 |
Plastics—Determination of refractive index 塑料 折光率的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 39385-2020 |
Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility 塑料管道系统 热塑性塑料管材 环柔性的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 18252-2020 |
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统 用外推法确定热塑性塑料材料以管材形式的长期静液压强度 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36805.2-2020 |
Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 14905-2020 |
Rubber and plastics hoses—Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 38273.2-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12009.5-2016 |
(Plastics - Aromatic isocyanates for the production of polyurethane - Part 5: Determination of acidity - amendment No. 1) 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定《第1号修改单》 |
China National Standards Plastics Determination |
English PDF |
| GB/T 38271-2019 |
Plastics—Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I)—Gas chromatography 塑料 聚苯乙烯(PS)和抗冲击聚苯乙烯（PS-I）中残留苯乙烯单体含量的测定 气相色谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1634.2-2019 |
Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite 塑料 负荷变形温度的测定 第2部分：塑料和硬橡胶 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1634.1-2019 |
Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 37196-2018 |
Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 37199.2-2018 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 37194.2-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1040.1-2018 |
Plastics—Determination of tensile properties—Part 1:General principles 塑料-拉伸性能的测定-第1部分：总则 |
China National Standards Plastics Determination |
English PDF |
| GB/T 2408-2008/XG1-2018 |
Plastics - Determination of burning characteristics - Horizontal and vertical test 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36214.5-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分：光散射法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36214.4-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36214.2-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36214.3-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36214.1-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分：通则 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36532-2018 |
Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics 纤维增强塑料 热固性模塑料和预浸料 固化特性测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36793-2018 |
Determination of platicizers in rubber-plastics—Gas chromatography-mass spectrometry method 橡塑材料中增塑剂含量的测定 气相色谱质谱联用法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36805.1-2018 |
Plastics—Determination of tensile properties at high strain rates—Part 1:Equation fitting method 塑料 高应变速率下的拉伸性能测定 第1部分：方程拟合法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 36800.2-2018 |
Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature 塑料 热机械分析法(TMA) 第2部分：线性热膨胀系数和玻璃化转变温度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 6111-2018 |
Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure 流体输送用热塑性塑料管道系统 耐内压性能的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 3682.2-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1043.2-2018 |
Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test 塑料 简支梁冲击性能的测定 第2部分：仪器化冲击试验 |
China National Standards Plastics Determination |
English PDF |
| GB/T 3682.1-2018 |
Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method 塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分：标准方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 20027.2-2017 |
Rubber-or plastics-coated fabrics—Determination of bursting strength—Part 2: Hydraulic method 橡胶或塑料涂覆织物 破裂强度的测定 第2部分：液压法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 34691.2-2017 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33797-2017 |
Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas 塑料 在高固体份堆肥条件下最终厌氧生物分解能力的测定 采用分析测定释放生物气体的方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12000-2017 |
Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist 塑料 暴露于湿热、水喷雾和盐雾中影响的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 35513.2-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试 |
China National Standards Plastics Determination |
English PDF |
| GB/T 34705-2017 |
Rubber-or plastics-coated fabrics—Determination of oil permeability resistance—Cup method 橡胶或塑料涂覆织物 油扩散性能的测定 杯法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33388-2016 |
Plastics—Determination of phenolic resin compositions—Liquid chromatography 塑料 酚醛树脂组分的测定 液相色谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33316-2016 |
Plastics—Phenolic resins—Determination of reactivity on a B-transformation test plate 塑料 酚醛树脂 在乙阶转变试板上反应活性的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33317-2016 |
Plastics—Phenolic resins—Determination of hexamethylenetetramine content—Kjeldahl method,perchloric acid method and hydrochloric acid method 塑料 酚醛树脂 六次甲基四胺含量的测定 凯氏定氮法、高氯酸法和盐酸法 |
China National Standards Plastics Determination |
English PDF |
| GB 31604.27-2016 |
National Food Safety Standard-Food contact materials and products-Plastics - Determination of ethylene oxide and propylene oxide 食品安全国家标准 食品接触材料及制品 塑料中环氧乙烷和环氧丙烷的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33098-2016 |
Rubber-or plastics-coated fabrics—Determination of seam dead load shear resistance 橡胶或塑料涂覆织物 接缝耐静载剪切性能测试方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 19466.4-2016 |
Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity 塑料 差示扫描量热法（DSC） 第4部分：比热容的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33061.1-2016 |
Plastics—Determination of dynamic mechanical properties—Part 1: General principles 塑料 动态力学性能的测定 第1部分：通则 |
China National Standards Plastics Determination |
English PDF |
| GB/T 20027.1-2016 |
Rubber-or plastics-coated fabrics—Determination of bursting strength—Part 1: Steel-ball method 橡胶或塑料涂覆织物 破裂强度的测定 第1部分：钢球法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 33061.10-2016 |
Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer 塑料 动态力学性能的测定 第10部分：使用平行平板振荡流变仪测定复数剪切黏度 |
China National Standards Plastics Determination |
English PDF |
| GB/T 5474-2016 |
Plastics—Phenol formaldehyde mouldings—Determination of free ammonia and ammonium compounds—Colorimetric comparison method 塑料 酚醛模塑制品 游离氨和铵化合物的测定 比色法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32697-2016 |
Plastics—Phenol-formaldehyde—Determination of electrical conductivity of resin extracts 塑料 酚醛树脂 萃取液电导率的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 7130-2016 |
Plastics—Phenol-formaldehyde mouldings—Determination of free phenols—lodometric method 塑料 酚醛模塑制品 游离酚的测定 碘量法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32682-2016 |
Plastics—Determination of environment stress cracking (ESC) of polyethylene—Full-notch creep test (FNCT) 塑料 聚乙烯环境应力开裂（ESC）的测定 全缺口蠕变试验（FNCT） |
China National Standards Plastics Determination |
English PDF |
| GB/T 32681-2016 |
Plastics—Phenolic resin —Determination of heats and temperatures of reaction by differential scanning calorimetry 塑料 酚醛树脂 用差示扫描量热计法测定反应热和反应温度 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32675-2016 |
Plastics—Phenloic resins—Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions 塑料 酚醛树脂 液体甲阶酚醛树脂在酸性条件下固化时假绝热温升的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32683.1-2016 |
Plastics—Determination of viscosity using a falling-ball viscometer—Part 1: Inclined-tube method 塑料 用落球黏度计测定黏度 第1部分：斜管法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32688-2016 |
Plastics—Phenloic resin powder—Determination of flow distance on a heated glass plate 塑料 酚醛树脂 在加热玻璃板上流动距离的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32477-2016 |
Plastics—Determination of total chlorine content in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯中总氯含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32471-2016 |
Plastics—Determination of the isomer ratio in toluene diisocyanates for use in the production of polyurethanes 塑料 用于聚氨酯生产的甲苯二异氰酸酯异构比的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12009.5-2016 |
Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 5: Determination of acidity 塑料 聚氨酯生产用芳香族异氰酸酯 第5部分：酸度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12009.4-2016 |
Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 4: Determination of isocyanate content 塑料 聚氨酯生产用芳香族异氰酸酯 第4部分：异氰酸根含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12009.2-2016 |
Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 2: Determination of hydrolysable chlorine 塑料 聚氨酯生产用芳香族异氰酸酯 第2部分：水解氯的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32364-2015 |
Plastics—Phenloic resins—Determination of pH 塑料 酚醛树脂 pH值的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32378-2015 |
Glass-reinforced thermosetting plastics (GRP) pipes—Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions 玻璃纤维增强热固性塑料（GRP）管 湿态环境下长期极限弯曲应变和长期极限相对环变形的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 9647-2015 |
Thermoplastics pipes—Determination of ring stiffness 热塑性塑料管材 环刚度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32363.2-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 32106-2015 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system—Method by measurement of biogas production 塑料 在水性培养液中最终厌氧生物分解能力的测定 通过测量生物气体产物的方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 31064-2014 |
Rubber-or plastics-coated fabrics―Determination of puncture resistance 橡胶或塑料涂覆织物 抗刺穿性测试方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 30925-2014 |
Plastics―Ethylene-vinyl acetate copolymer(EVAC) thermoplastics―Determination of vinyl acetate content 塑料 乙烯-乙酸乙烯酯共聚物（EVAC）热塑性塑料 乙酸乙烯酯含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 30924.2-2014 |
Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 24148.9-2014 |
Plastics—Unsaturated polyester resins (UP-R)—Part 9: Determination of overall volume shrinkage 塑料 不饱和聚酯树脂(UP-R） 第9部分：总体积收缩率测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 24148.8-2014 |
Plastics—Unsaturated polyester resin—Part 8：Determination of color using platinum-cobalt colormetric method 塑料 不饱和聚酯树脂（UP-R） 第8部分：铂-钴比色法测定颜色 |
China National Standards Plastics Determination |
English PDF |
| GB/T 9572-2013 |
Rubber and plastics hoses and hose assemblies—Determination of electrical resistance and conductivity 橡胶和塑料软管及软管组合件 电阻和导电性的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 5567-2013 |
Rubber and plastics hoses and hose assemblies―Determination of resistance to vacuum 橡胶和塑料软管及软管组合件 耐真空性能的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 18422-2013 |
Rubber and plastics hoses and hose assemblies—Determination of permeability to gas 橡胶和塑料软管及软管组合件 透气性的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 30086-2013 |
Determination of axial coefficient of linear expansion of plastics pipes for water supply 给水塑料管道轴向线膨胀系数试验方法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 3403.2-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 29874-2013 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder 塑料 氯乙烯均聚和共聚树脂 气相色谱法对干粉中残留氯乙烯单体的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 13454.2-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: Preparation of test specimens and determination of properties 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 18423-2013 |
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls 橡胶和塑料软管及非增强软管 液体壁透性测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 19089-2012 |
Rubber-or plastics-coated fabrics - Determination of abrasion resistance - Martindale method 橡胶或塑料涂覆织物 耐磨性的测定 马丁代尔法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 26253-2010 |
Determination of water vapour transmission rate for plastics-filmand sheeting - Infrared detection sensor method 塑料薄膜和薄片水蒸气透过率的测定 红外检测器法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 25278-2010 |
Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers 塑料 用毛细管和狭缝口模流变仪测定塑料的流动性 |
China National Standards Plastics Determination |
English PDF |
| GB/T 25277-2010 |
Plastics - Determination of phenolic antioxidants and erucamide slip additives in polypropylene homopolymer formulations - liquid chromatography (LC) 塑料 均聚聚丙烯（PP-H）中酚类抗氧剂和芥酸酰胺爽滑剂的测定 液相色谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 1632.3-2010 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - part3: Polyethylenes and polypropylenes 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第3部分：聚乙烯和聚丙烯 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12008.7-2010 |
Plastics - Polyether polyols - Part 7：Determination of viscosity 塑料 聚醚多元醇 第7部分：粘度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12008.6-2010 |
Plastics - Polyether polyols - Part 6: Determination of degree of unsaturation 塑料 聚醚多元醇 第6部分：不饱和度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12008.5-2010 |
Plastics - Polyether polyols - Part 5：Determination of acidity as acid number 塑料 聚醚多元醇 第5部分：酸值的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 15597.2-2010 |
Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 3402.2-2010 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties 塑料 氯乙烯均聚和共聚树脂 第2部分：试样制备及性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12010.7-2010 |
Plastics - polyvinyl alcohol （PVAL）materials - Part 7: Determination for sodium hydroxide contents 塑料 聚乙烯醇材料（PVAL） 第7部分：氢氧化钠含量测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 9345.5-2010 |
Plastics - Determination of ash - Part 5: Poly(vinyl chloride) 塑料 灰分的测定 第5部分：聚氯乙烯 |
China National Standards Plastics Determination |
English PDF |
| GB/T 24282-2009 |
Plastics - Determination of xylene-soluble matter in polypropylene 塑料 聚丙烯中二甲苯可溶物含量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 4617-2009 |
Plastics - Phenolic mouldings - Determination of acetone-soluble matter 塑料 酚醛模塑制品 丙酮可溶物的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 24148.6-2009 |
Plastics - Unsaturated-polyester resins - Part 6: Determination of reactivity at 130℃ 塑料 不饱和聚酯树脂 (UP-R) 第6部分：130℃反应活性测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 24148.4-2009 |
Plastics - Unsaturated polyester resin - Part 4: Determination of viscosity 塑料 不饱和聚酯树脂(UP-R) 第4部分：粘度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 24148.2-2009 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties 塑料 不饱和聚酯树脂（UP-R） 第2部分：试样制备和性能测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 2406.2-2009 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test 塑料 用氧指数法测定燃烧行为 第2部分：室温试验 |
China National Standards Plastics Determination |
English PDF |
| GB/T 19466.6-2009 |
Plastics - Differential scanning calorimetry（DSC）- Part 6: Determination of oxidation induction time（isothermal OIT）and oxidation induction temperature（dynamic OIT） 塑料 差示扫描量热法（DSC）第6部分：氧化诱导时间(等温OIT)和氧化诱导温度（动态OIT）的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 16578.2-2009 |
Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method 塑料 薄膜和薄片 耐撕裂性能的测定 第2部分：埃莱门多夫（Elmendor）法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 14905-2009 |
Rubber and plastics hoses - Determination of adhesion between components 橡胶和塑料软管 各层间粘合强度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12009.3-2009 |
Plastics - Polymethylene polyphenyl isocyanate - Part 3: Determination of viscosity 塑料 多亚甲基多苯基异氰酸酯 第3部分：黏度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12008.4-2009 |
Plastics - Polyether polyols - Part 4: Determination of sodium and potassium 塑料 聚醚多元醇 第4部分：钠和钾的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12008.3-2009 |
Plastics - Polyether polyols - Part 3: Determination of hydroxyl number 塑料 聚醚多元醇 第3部分：羟值的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12006.2-2009 |
Plastics - Polyamides - Part 2: Determination of water content 塑料 聚酰胺 第2部分：含水量测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 12006.1-2009 |
Plastics - Polyamides - Part 1: Determination of viscosity number 塑料 聚酰胺 第1部分：黏数测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 15596-2009 |
Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass，natural weathering or laboratory light sources 塑料在玻璃下日光、自然气候或实验室光源暴露后颜色和性能变化的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 6343-2009 |
Cellular plastics and rubbers - Determination of apparent density 泡沫塑料及橡胶 表观密度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 23653-2009 |
Plastics - PVC resins for general use - Determination of hot plasticizer absorption 塑料 通用型聚氯乙烯树脂 热增塑剂吸收量的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 23652-2009 |
Plastics - PVC resins - Determination of compacted apparent bulk density 塑料 氯乙烯均聚和共聚树脂 振实表观密度的测定 |
China National Standards Plastics Determination |
English PDF |
| GB/T 23296.7-2009 |
Food contact materials - Determination of epichlorohydrin in plastics - High performance liquid chromatography 食品接触材料 塑料中表氯醇含量的测定 高效液相色谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 23296.3-2009 |
Food contact materials - Determination of 1,3-butadiene in plastics - Gas chromatography 食品接触材料 塑料中1,3-丁二烯含量的测定 气相色谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 23296.22-2009 |
Food contact materials - Determination of isocyanates in plastics - High performance liquid chromatography 食品接触材料 塑料中异氰酸酯含量的测定 高效液相色谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 23296.13-2009 |
Food contact materials - Determination of vinyl chloride monomer in plastics - Gas chromatography 食品接触材料 塑料中氯乙烯单体的测定 气相色谱法 |
China National Standards Plastics Determination |
English PDF |
| GB/T 23296.1-2009 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and th 食品接触材料 塑料中受限物质 塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露条件选择的指南 |
China National Standards Plastics Determination |
English PDF |
| GB/T 23296.11-2009 |
Food contact materials - Determination of ethylene oxide and propylene oxide in plastics - Gas chromatography 食品接触材料 塑料中环氧乙烷和环氧丙烷含量的测定 气相色谱法 |
China National Standards Plastics Determination |
English PDF |
| Find out:332Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
