Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43289-2023 |
Plastics. Test method for determining the rate of decomposition and extent of disintegration of plastic materials in matrices exposed to the marine environment under laboratory conditions. {译} 塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法 |
China National Standards Plastics Test |
 English PDF |
| GB/T 43288-2023 |
Plastics. Soil biodegradable materials for agricultural and horticultural mulch films. Requirements and test methods for biodegradability, ecotoxicity and composition control. {译} 塑料 农业和园艺地膜用土壤生物降解材料 生物降解性能、生态毒性和成分控制的要求和试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 41312.3-2023 |
Permeability testing methods for equipment used in chemical industry Part 3: Plastics and their lining equipment {译} 化工用设备渗透性检测方法 第3部分：塑料及其衬里设备 |
China National Standards Plastics Test |
English PDF |
| GB/T 42764-2023 |
Plastics - Evaluation of the intrinsic aerobic biodegradability of materials exposed to marine inoculum under laboratory mesophilic conditions - Test methods and requirements {译} 塑料 在实验室中温条件下暴露于海洋接种物的材料固有需氧生物分解能力评估 试验方法与要求 |
China National Standards Plastics Test |
English PDF |
| GB/T 1040.2-2022 |
Plastics - Determination of tensile properties - Part 2: Test conditions for molded and extruded plastics {译} 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 |
China National Standards Plastics Test |
English PDF |
| GB/T 18743.2-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials {译} 热塑性塑料管材 简支梁冲击强度的测定 第2部分：不同材料管材的试验条件 |
China National Standards Plastics Test |
English PDF |
| GB/T 18743.1-2022 |
Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods {译} 热塑性塑料管材 简支梁冲击强度的测定 第1部分：通用试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 16422.4-2022 |
Plastics - laboratory light source exposure test methods - Part 4: open carbon arc lamps {译} 塑料 实验室光源暴露试验方法 第4部分：开放式碳弧灯 |
China National Standards Plastics Test |
English PDF |
| GB/T 16422.3-2022 |
Plastics - laboratory light source exposure test methods - Part 3: fluorescent ultraviolet lamps {译} 塑料 实验室光源暴露试验方法 第3部分：荧光紫外灯 |
China National Standards Plastics Test |
English PDF |
| GB/T 16422.2-2022 |
Plastics - laboratory light source exposure test methods - Part 2: Xenon arc lamps {译} 塑料 实验室光源暴露试验方法 第2部分：氙弧灯 |
China National Standards Plastics Test |
English PDF |
| GB/T 5568-2022 |
Rubber or plastics hoses and hose assemblies - Hydraulic impulse test without deflection {译} 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 8333-2022 |
Plastics - Test method for combustion behavior of rigid foamed plastics - Vertical combustion method {译} 塑料 硬质泡沫塑料燃烧性能试验方法 垂直燃烧法 |
China National Standards Plastics Test |
English PDF |
| GB/T 41929-2022 |
Plastics - epoxy resins - test methods {译} 塑料 环氧树脂 试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 41931-2022 |
Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test {译} 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 2406.3-2022 |
Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料 用氧指数法测定燃烧行为 第3部分：高温试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 41937-2022 |
Rubber or plastics coated fabrics-Physical-mechanical property tests-Determination of flex resistance by deflectionometer method {译} 橡胶或塑料涂覆织物 物理机械性能试验 挠度仪法测定耐曲挠性 |
China National Standards Plastics Test |
English PDF |
| GB/T 1038.2-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 2: Equal pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第2部分：等压法 |
China National Standards Plastics Test |
English PDF |
| GB/T 1038.1-2022 |
Plastics - Films and sheets - Test methods for gas permeability - Part 1: Differential pressure method {译} 塑料制品 薄膜和薄片 气体透过性试验方法 第1部分：差压法 |
China National Standards Plastics Test |
English PDF |
| GB/T 24135-2022 |
Rubber or plastics coated fabrics - Accelerated aging test {译} 橡胶或塑料涂覆织物 加速老化试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 41879-2022 |
Plastics - Burning behavior - Medium-scale fire tests of fiber-reinforced polymer composites {译} 塑料 燃烧性能 纤维增强聚合物复合材料的中等尺寸耐火测试 |
China National Standards Plastics Test |
English PDF |
| GB/T 41758.2-2022 |
Plastics - Polyketone (PK) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties {译} 塑料 聚酮（PK）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 40440-2021 |
Plastics—Extruded sheets of impact-modified acrylonitrile-styrene copolymers(ABS,AEPDS and ASA)—Requirements and test methods 塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 40340-2021 |
Composites and metal assemblies—Galvanic corrosion tests of carbon fibre reinforced plastics (CFRPs) related bonded or fastened structures in artificial atmospheres—Salt spray tests 复合材料与金属组合件 碳纤维增强聚合物基复合材料胶接或紧固件连接结构人工环境下的电偶腐蚀试验 盐雾试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 40315-2021 |
Plastics—Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value 塑料 采用水溶液保持湿度恒定进行状态调节和试验的小密闭容器 |
China National Standards Plastics Test |
English PDF |
| GB/T 2408-2021 |
Plastics—Determination of burning characteristics—Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards Plastics Test |
English PDF |
| GB/T 1845.2-2021 |
Plastics—Polyethylene (PE) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料 聚乙烯（PE）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 39937-2021 |
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 塑料制品 聚丙烯(PP)挤塑板材 要求和试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 39936-2021 |
Plastics—Extruded sheets of polypropylene (PP)—Requirements and test methods 深冷保冷用泡沫塑料 |
China National Standards Plastics Test |
English PDF |
| GB/T 39827.2-2021 |
Plastics -- Post-consumer poly(ethylene terephthalate)(PET) bottle recyclates -- Part 2: Preparation of test specimens and determination properties 塑料 用过的聚对苯二甲酸乙二醇酯(PET)瓶回收物 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 39812-2021 |
Plastics—Preparation of test specimens by machining 塑料 试样的机加工制备 |
China National Standards Plastics Test |
English PDF |
| GB/T 41061-2021 |
Test methods for creep properties of fiber reinforced plastics 纤维增强塑料蠕变性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 40933-2021 |
Plastics—Film and sheeting—Guidance on the testing of thermoplastic films 塑料制品 薄膜和薄片 热塑性塑料薄膜试验指南 |
China National Standards Plastics Test |
English PDF |
| GB/T 18426-2021 |
Rubber-or plastics-coated fabrics—Low-temperature bend test 橡胶或塑料涂覆织物 低温弯曲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 40872-2021 |
Plastics—Test methods of polyethylene cellular 塑料 聚乙烯泡沫试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 22271.2-2021 |
Plastics -- Polyoxymethylene(POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 38787-2020 |
Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials 塑料 材料生物分解试验用样品制备方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 39714.2-2020 |
Plastics—Polytetrafluoroethylene(PTFE) semi-finished products—Part 2:Preparation of test specimens and determination of properties 塑料 聚四氟乙烯(PTFE)半成品 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 39690.2-2020 |
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties 塑料 源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 17037.5-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy 塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备 |
China National Standards Plastics Test |
English PDF |
| GB/T 17037.2-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars 塑料 热塑性塑料材料注塑试样的制备 第2部分：小拉伸试样 |
China National Standards Plastics Test |
English PDF |
| GB/T 39383-2020 |
Thermoplastics piping systems for underground non-pressure applications—Test method for leaktightness of elastomeric sealing ring type joints 埋地用无压热塑性塑料管道系统 弹性密封圈接头的密封性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 39382-2020 |
Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints 建筑内排水排污用热塑性塑料管道系统 接头气密性试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 39379-2020 |
Thermoplastics piping systems for non-pressure applications—Test method for watertightness 无压热塑性塑料管道系统 水密性试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 39395-2020 |
Test method for buckling resistance of the thermoplastics inspection chamber bases 热塑性塑料检查井井座抗压失稳试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 39490-2020 |
Test method for liquid impingement erosion resistance of fiber-reinforced plastics—Rotating apparatus method 纤维增强塑料液体冲击抗侵蚀性试验方法 旋转装置法 |
China National Standards Plastics Test |
English PDF |
| GB/T 39249-2020 |
Rubber and plastics hoses and tubing—Textile-reinforced types—Sub-ambient temperature crush test 橡胶和塑料软管及非增强软管 织物增强型 低温压扁试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 36805.2-2020 |
Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method 塑料 高应变速率下的拉伸性能测定 第2部分：直接测试法 |
China National Standards Plastics Test |
English PDF |
| GB/T 38273.2-2019 |
Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.8-2019 |
Test method for pressure vessels lined with plastics—Part 8:High-resistance testing 塑料衬里压力容器试验方法 第8部分：耐高电阻试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.1-2019 |
Test method for pressure vessels lined with plastics—Part 1:Spark testing 塑料衬里压力容器试验方法 第1部分：电火花试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.7-2019 |
Test method for pressure vessels lined with plastics—Part 7:Leakage testing 塑料衬里压力容器试验方法 第7部分：泄漏试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.6-2019 |
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing 塑料衬里压力容器试验方法 第6部分：耐压试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.5-2019 |
Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection 塑料衬里压力容器试验方法 第5部分：冷热循环检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.4-2019 |
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection 塑料衬里压力容器试验方法 第4部分：耐负压检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.3-2019 |
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection 塑料衬里压力容器试验方法 第3部分：耐高温检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.2-2019 |
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing 塑料衬里压力容器试验方法 第2部分：耐低温试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 37890-2019 |
Rubber-or plastics-coated fabrics—Test method for wicking of the cloth 橡胶或塑料涂覆织物 芯吸性能测试方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 37889-2019 |
Rubber-or plastics-coated fabrics—Test method for liquid contamination 橡胶或塑料涂覆织物 致液体污染性测试方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 37426-2019 |
Plastics—Test specimens 塑料 试样 |
China National Standards Plastics Test |
English PDF |
| GB/T 17037.1-2019 |
Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens 塑料 热塑性塑料材料注塑试样的制备 第1部分：一般原理及多用途试样和长条形试样的制备 |
China National Standards Plastics Test |
English PDF |
| GB/T 1634.1-2019 |
Plastics—Determination of temperature of deflection under load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 24113.2-2019 |
Electrical equipment of machines—Computer control systems for plastics machinery—Part 2：Test and evaluation method 机械电气设备 塑料机械计算机控制系统 第2部分：试验与评价方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 2918-2018 |
Plastics—Standard atmospheres for conditioning and testing 塑料-试样状态调节和试验的标准环境 |
China National Standards Plastics Test |
English PDF |
| GB/T 37199.2-2018 |
Plastics—Polybutene(PB) moulding and extrusion materials—Part 2：Preparation of test specimens and determination of properties 塑料-聚丁烯（PB）模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 37194.2-2018 |
Plastics—Poly(phenylene sulfide)(PPS) moulding and extrusion materials—Part 2:Preparation of test specimens and determination of properties 塑料-聚苯硫醚(PPS)模塑和挤出材料-第2部分:试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 2408-2008/XG1-2018 |
Plastics - Determination of burning characteristics - Horizontal and vertical test 《塑料-燃烧性能的测定-水平法和垂直法》国家标准第1号修改单 |
China National Standards Plastics Test |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 36790-2018 |
Plastics—Polyamides—Accelerated conditioning of test specimens 塑料 聚酰胺 试样加速状态调节 |
China National Standards Plastics Test |
English PDF |
| GB/T 35974.5-2018 |
Plastics and plastic lining pressure vessels—Part 5: Fabrication, inspection and testing for pressure vessels with plastic lining 塑料及其衬里制压力容器 第5部分：塑料衬里制压力容器的制造、检查与检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 35974.4-2018 |
Plastics and plastic lining pressure vessels—Part 4: Fabrication, inspection and testing for plastic pressure vessels 塑料及其衬里制压力容器 第4部分：塑料制压力容器的制造、检查与检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 1043.2-2018 |
Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test 塑料 简支梁冲击性能的测定 第2部分：仪器化冲击试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 34691.2-2017 |
Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 热塑性聚酯(TP)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 34437-2017 |
Test method of the oxygen permeability of the multilayer composite plastics pipe 多层复合塑料管材氧气渗透性能测试方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 3854-2017 |
Test method for hardness of reinforced plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 5565.2-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第2部分：低于室温弯曲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 5565.3-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第3部分：高温和低温弯曲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 5565.1-2017 |
Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 1: Bending tests at ambient temperatures 橡胶和塑料软管及非增强软管 柔性及挺性的测量 第1部分：室温弯曲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 3857-2017 |
Test method for chemical resistance of glass fiber reinforced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 33488.4-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 4:Ultrasonic examination 化工用塑料焊接制承压设备检验方法 第4部分：超声检测 |
China National Standards Plastics Test |
English PDF |
| GB/T 33488.1-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 1: General requirements 化工用塑料焊接制承压设备检验方法 第1部分：总则 |
China National Standards Plastics Test |
English PDF |
| GB/T 33488.3-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 3: Radiographic examination 化工用塑料焊接制承压设备检验方法 第3部分：射线检测 |
China National Standards Plastics Test |
English PDF |
| GB/T 33488.2-2017 |
Test method of pressure equipments of thermoplastics welded for chemicals—Part 2: Visual examination 化工用塑料焊接制承压设备检验方法 第2部分：外观检测 |
China National Standards Plastics Test |
English PDF |
| GB/T 17603-2017 |
Standard practice for outdoor exposure testing of photodegradable plastics 光解性塑料户外暴露试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 35382-2017 |
Test methods for energy consumption of blow moulding machines for plastics 塑料中空成型机能耗检测方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 35513.2-2017 |
Plastics—Polycarbonate (PC) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚碳酸酯(PC)模塑和挤出材料 第2部分：试样制备和性能测试 |
China National Standards Plastics Test |
English PDF |
| GB/T 33580-2017 |
Testing and measuring methods of energy consumption for rubber and plastics extruder 橡胶塑料挤出机能耗检测方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 3960-2016 |
Plastics—Test method for friction and wear by sliding 塑料 滑动摩擦磨损试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 33316-2016 |
Plastics—Phenolic resins—Determination of reactivity on a B-transformation test plate 塑料 酚醛树脂 在乙阶转变试板上反应活性的测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 32682-2016 |
Plastics—Determination of environment stress cracking (ESC) of polyethylene—Full-notch creep test (FNCT) 塑料 聚乙烯环境应力开裂（ESC）的测定 全缺口蠕变试验（FNCT） |
China National Standards Plastics Test |
English PDF |
| GB/T 32363.2-2015 |
Plastics—Polyamide (PA) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料 聚酰胺模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 30924.2-2014 |
Plastics―Ethylene-vinyl acetate(EVAC) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 乙烯-乙酸乙烯酯(EVAC)模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 30200-2013 |
Test method for energy consumption of rubber and plastics injection moulding machines 橡胶塑料注射成型机能耗检测方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 5568-2013 |
Rubber or plastics hoses and hose assemblies—Hydraulic-pressure impulse test without flexing 橡胶或塑料软管及软管组合件 无曲挠液压脉冲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 5563-2013 |
Rubber and plastics hoses and hose assemblies—Hydrostatic testing 橡胶和塑料软管及软管组合件 静液压试验方法 |
China National Standards Plastics Test |
English PDF |
| GB 29993-2013 |
Rubber and/or plastics hoses and hoses assemblies for domestic gas-technical requirements and testing methods 家用燃气用橡胶和塑料软管及软管组合件技术条件和评价方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.4-2013 |
Fibre-reinforced plastics - Methods of producing test plates - Part 4：Moulding of prepregs 纤维增强塑料 试验板制备方法 第4部分：预浸料模塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 3403.2-2013 |
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF-and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties 塑料 粉状脲-甲醛和脲/三聚氰胺-甲醛模塑料（UF-和UF/MF-PMCs） 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 13454.2-2013 |
Plastics - Melamine-formaldehyde powder moulding compounds（MF-PMCs）-Part 2: Preparation of test specimens and determination of properties 塑料 粉状三聚氰胺-甲醛模塑料 (MF-PMCs) 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 14904-2011 |
Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing 钢丝增强橡胶和塑料软管及软管组合件 曲挠液压脉冲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.9-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC 纤维增强塑料 试验板制备方法 第9部分：GMT/STC模塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.8-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分：SMC及BMC模塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.7-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分：树脂传递模塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.6-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding 纤维增强塑料 试验板制备方法 第6部分：拉挤模塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.5-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding 纤维增强塑料 试验板制备方法 第5部分：缠绕成型 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.3-2011 |
Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分：湿法模塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.2-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分：接触和喷射模塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.1-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions 纤维增强塑料 试验板制备方法 第1部分：通则 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.11-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分：BMC和其他长纤维模塑料注射模塑 小方片 |
China National Standards Plastics Test |
English PDF |
| GB/T 27797.10-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 27726-2011 |
Thermoplastics valves - Pressure test methods and requirements 热塑性塑料阀门压力试验方法及要求 |
China National Standards Plastics Test |
English PDF |
| GB/T 25270-2010 |
Rubber and plastics test equipment - Tensile,flexural and compression types(constant rate of traverse) - Specification 橡胶塑料的拉伸、屈挠和压缩试验设备（恒速移动型） 技术要求 |
China National Standards Plastics Test |
English PDF |
| GB/T 15597.2-2010 |
Plastics - Poly(methyl methacrylate)(PMMA)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 3402.2-2010 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties 塑料 氯乙烯均聚和共聚树脂 第2部分：试样制备及性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 24148.2-2009 |
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties 塑料 不饱和聚酯树脂（UP-R） 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 24135-2009 |
Rubber or plastics coated fabrics - Accelerated ageing tests 橡胶或塑料涂覆织物 加速老化试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 24133-2009 |
Rubber-or plastics-coated fabrics - Standard atmospheres for conditioning and testing 橡胶或塑料涂覆织物 调节和试验的标准环境 |
China National Standards Plastics Test |
English PDF |
| GB/T 24128-2009 |
Method for testing resistance of plastics to mold 塑料防霉性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 24127-2009 |
Testing method for determining algal resistance of plastics 塑料抗藻性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 2406.2-2009 |
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test 塑料 用氧指数法测定燃烧行为 第2部分：室温试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.6-2009 |
Hydrostatic pressure test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 压力试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.5-2009 |
Expansion and contraction test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 热胀冷缩试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.4-2009 |
Vacuum test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐真空试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.3-2009 |
High temperature test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐高温试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.2-2009 |
Low temperature test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 耐低温试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 23711.1-2009 |
Spark test method for pressure vessels lined with fluoroplastics 氟塑料衬里压力容器 电火花试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 23296.1-2009 |
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and th 食品接触材料 塑料中受限物质 塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露条件选择的指南 |
China National Standards Plastics Test |
English PDF |
| GB/T 22410-2008 |
Packaging - Transport packaging for dangerous goods - Plastics compatibility testing 包装 危险货物运输包装 塑料相容性试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 12001.2-2008 |
Plastics - Unplasticized poly (vinyl chloride) (PVC-U) moulding and extruded materials - Part 2: Preparation of test specimens and determination of properties 塑料 未增塑聚氯乙烯模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 5478-2008 |
Plastics - Test method for wear by rolling 塑料 滚动磨损试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 5471-2008 |
Plastics - Compression moulding of test specimens of thermosetting materials 塑料 热固性塑料试样的压塑 |
China National Standards Plastics Test |
English PDF |
| GB/T 2408-2008 |
Plastics - Determination of burning characteristics - Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards Plastics Test |
English PDF |
| GB/T 22271.2-2008 |
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 聚甲醛（POM）模塑和挤塑材料 第2部分：试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 1404.2-2008 |
Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties 塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 1043.1-2008 |
Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test 塑料 简支梁冲击性能的测定 第1部分：非仪器化冲击试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 1040.5-2008 |
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites 塑料 拉伸性能的测定 第5部分：单向纤维增强复合材料的试验条件 |
China National Standards Plastics Test |
English PDF |
| GB/T 1036-2008 |
Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer 塑料 -30℃～30℃线膨胀系数的测定 石英膨胀计法 |
China National Standards Plastics Test |
English PDF |
| GB/T 1842-2008 |
Plastics - Test method for environmental stress-cracking of polyethylene 塑料 聚乙烯环境应力开裂试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 2573-2008 |
Test method for aging properties of glass fiber reinforced plastics 玻璃纤维增强塑料老化性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 15738-2008 |
Test method for resistivity of conducting and antistatic fiber reinforced plastics 导电和抗静电纤维增强塑料电阻率试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 1458-2008 |
Test method for mechanical properties of ring of filament-winding reinforced plastics 纤维缠绕增强塑料环形试样力学性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 9343-2008 |
Test method for flammability of plastics - Determination of flash-ignition temperature and self-ignition temperature 塑料燃烧性能试验方法 闪燃温度和自燃温度的测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 17200-2008 |
Technical specification for tensile, compression and flexural testing machines for rubber and plastics (constant rate of rtaverse) 橡胶塑料拉力、压力和弯曲试验机（恒速驱动） 技术规范 |
China National Standards Plastics Test |
English PDF |
| GB/T 22236-2008 |
Testing of plastics Size reduction of plastic products for test purposes 塑料的检验 检验用塑料制品的粉碎 |
China National Standards Plastics Test |
English PDF |
| GB/T 14522-2008 |
Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps 机械工业产品用塑料、涂料、橡胶材料人工气候老化试验方法 荧光紫外灯 |
China National Standards Plastics Test |
English PDF |
| GB/T 21991-2008 |
Plastics - Preparation of PVC paste for test purpose - Planetary-mixer method 塑料 试验用聚氯乙烯（PVC）糊的制备 行星混合器法 |
China National Standards Plastics Test |
English PDF |
| GB/T 16613-2008 |
Plastics - Preparation of PVC pastes for test purposes - Dissolver method 塑料 试验用聚氯乙烯（PVC）糊的制备 分散器法 |
China National Standards Plastics Test |
English PDF |
| GB/T 15907-2008 |
Rubber and plastics hoses - Method of test for flammability 橡胶和塑料软管 可燃性试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 12722-2008 |
Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test（half-omega test） 橡胶和塑料软管组合件 液压脉冲曲挠试验（半Ω试验） |
China National Standards Plastics Test |
English PDF |
| GB/T 12584-2008 |
Rubber or plastics coated fabrics - Low-temperature impact test 橡胶或塑料涂覆织物 低温冲击试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 21461.2-2008 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 21460.2-2008 |
Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 8811-2008 |
Test method for dimensional stability of rigid cellular plastics 硬质泡沫塑料 尺寸稳定性试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 21333-2008 |
Cellular plastics,rigid - Test methods for self-skinned,high-density materials 硬质泡沫塑料 自结皮高密度材料试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 8812.1-2007 |
Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test 硬质泡沫塑料 弯曲性能的测定 第1部分：基本弯曲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 3048.3-2007 |
Test methods for electrical properties of electric cables and wires - Part 3：Test of volume resistivity of semi-conducting rubbers and plastics 电线电缆电性能试验方法 第3部分：半导电橡塑材料体积电阻率试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 21189-2007 |
Verification of pendulum impact-testing machines used for Charpy, lzod and tensile impact-testing of plastics 塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 5565-2006 |
Rubber or plastics hoses tubing - Bending tests 橡胶或塑料增强软管和非增强软管 弯曲试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 5564-2006 |
Rubber and plastics hoses - Subambient temperature flexibility tests 橡胶及塑料软管 低温曲挠试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 1040.4-2006 |
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites 塑料 拉伸性能的测定 第4部分：各向同性和正交各向异性纤维增强复合材料的试验条件 |
China National Standards Plastics Test |
English PDF |
| GB/T 1040.3-2006 |
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets 塑料 拉伸性能的测定 第3部分：薄膜和薄片的试验条件 |
China National Standards Plastics Test |
English PDF |
| GB/T 1040.2-2006 |
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件 |
China National Standards Plastics Test |
English PDF |
| GB/T 20417.2-2006 |
Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 1845.2-2006 |
Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties 塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 19993-2005 |
Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling 冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 20024-2005 |
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 9979-2005 |
Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures 纤维增强塑料高低温力学性能 试验准则 |
China National Standards Plastics Test |
English PDF |
| GB/T 8924-2005 |
Test method for flammability characteristics of fiber reinforced plastics-Oxygen index method 纤维增强塑料燃烧性能试验方法 氧指数法 |
China National Standards Plastics Test |
English PDF |
| GB/T 7559-2005 |
Test method for bearing strength by bolted joints of fiber reinforced plastics laminates 纤维增强塑料层合板 螺栓连接挤压强度试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 6011-2005 |
Test method for flammability characteristics of fiber-reinforced plastics-Incandescent rod method 纤维增强塑料燃烧性能试验方法 炽热棒法 |
China National Standards Plastics Test |
English PDF |
| GB/T 3857-2005 |
Test method for chemical resistance of glass fiber reinforced thermosetting plastics 玻璃纤维增强热固性塑料耐化学介质性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 3856-2005 |
Test method for compression properties of unidirectional fiber reinforced plastics 单向纤维增强塑料平板压缩性能试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 3855-2005 |
Test method for resin content of carbon fiber reinforced plastics 碳纤维增强塑料树脂含量试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 3854-2005 |
Test method for hardness of reinforced plastics by means of a Barcol impresser 增强塑料巴柯尔硬度试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 2577-2005 |
Test method for resin content of glass fiber reinforced plastics 玻璃纤维增强塑料树脂含量试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 2576-2005 |
Test method for insoluble matter content of resin rsed in fiber reinforced plastics 纤维增强塑料树脂不可溶分含量试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 1463-2005 |
Test methods for density and relative density of fiber reinforced plastics 纤维增强塑料密度和相对密度试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 1462-2005 |
Test methods for water absorption of fiber reinforced plastics 纤维增强塑料吸水性试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 19811-2005 |
Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 在定义堆肥化中试条件下 塑料材料崩解程度的测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 19809-2005 |
Plastics pipes and fittings-Preparation of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 |
China National Standards Plastics Test |
English PDF |
| GB/T 19808-2005 |
Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm 塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 19807-2005 |
Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备 |
China National Standards Plastics Test |
English PDF |
| GB/T 19806-2005 |
Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies 塑料管材和管件 聚乙烯电熔组件的挤压剥离试验 |
China National Standards Plastics Test |
English PDF |
| GB/T 19712-2005 |
Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance 塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 19687-2005 |
Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods) 闭孔塑料长期热阻变化的测定 实验室加速测试方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 1634.1-2004 |
Plastics--Determination of temperature of deflection under load--Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 19471.2-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes--Test method for leaktightness under negative pressure 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 负压密封试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 19471.1-2004 |
Plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktighness under internal pressure and angular deflection 塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法 |
China National Standards Plastics Test |
English PDF |
| GB 19434.8-2004 |
Safety code for theinspection of rigid plastics IBCs for dangerous goods--Performance tests 危险货物刚性塑料中型散装容器检验安全规范 性能检验 |
China National Standards Plastics Test |
English PDF |
| GB/T 19280-2003 |
Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) 流体输送用热塑性塑料管材 耐快速裂纹扩展(RCP)的测定 小尺寸稳态试验(S4试验) |
China National Standards Plastics Test |
English PDF |
| GB/T 5566-2003 |
Rubber or plastics hoses--Test method for crush resistance 橡胶或塑料软管 耐压扁试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 6111-2003 |
Thermoplastics pipes for the conveyance of fluids--Resistance to internal pressure--Test method 流体输送用热塑性塑料管材耐内压试验方法 |
China National Standards Plastics Test |
English PDF |
| GB/T 6594.2-2003 |
Plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties 塑料 聚苯乙烯(PS)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 2546.2-2003 |
Plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties 塑料 聚丙烯(PP)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| GB/T 18964.2-2003 |
Plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastics Test |
English PDF |
| Find out:218Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
