China Plastics Determination the GB Standards List

China "Plastics Determination the" GB Standards List:

Standard Code	Standard Title	Standard Class	Order
GB/T 43287-2023	Plastics Determination of the degree of disintegration of plastic materials in the marine environment under actual field conditions {译} 塑料在实际野外条件海洋环境中塑料材料崩解度的测定	China National Standards Plastics Determination the	English PDF
GB/T 43282.1-2023	Plastics. Determination of the aerobic biodegradation of plastic materials exposed to seawater. Part 1: Using methods to analyze the release of carbon dioxide. {译} 塑料暴露于海水中塑料材料需氧生物分解的测定第1部分：采用分析释放二氧化碳的方法	China National Standards Plastics Determination the	English PDF
GB/T 43355-2023	Determination of antiviral activity on surfaces of plastics and other non-porous materials {译} 塑料和其他无孔材料表面抗病毒活性的测定	China National Standards Plastics Determination the	English PDF
GB/T 42918.2-2023	Plastics - Thermoplastic polyurethanes for molding and extrusion - Part 2: Specimen preparation and property determination {译} 塑料模塑和挤出用热塑性聚氨酯第2部分：试样制备和性能测定	China National Standards Plastics Determination the	English PDF
GB/T 31402-2023	Determination of antimicrobial activity on surfaces of plastics and other non-porous materials {译} 塑料和其他无孔材料表面抗菌活性的测定	China National Standards Plastics Determination the	English PDF
GB/T 42919.6-2023	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method based on temperature modulation technology {译} 塑料导热系数和热扩散系数的测定第6部分：基于温度调制技术的比较法	China National Standards Plastics Determination the	English PDF
GB/T 42919.4-2023	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method {译} 塑料导热系数和热扩散系数的测定第4部分:激光闪光法	China National Standards Plastics Determination the	English PDF
GB/T 42919.3-2023	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method {译} 塑料导热系数和热扩散系数的测定第3部分：温度波分析法	China National Standards Plastics Determination the	English PDF
GB/T 42919.1-2023	Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles {译} 塑料导热系数和热扩散系数的测定第1部分:通则	China National Standards Plastics Determination the	English PDF
GB/T 18743.2-2022	Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 2: test conditions for pipes of different materials {译} 热塑性塑料管材简支梁冲击强度的测定第2部分：不同材料管材的试验条件	China National Standards Plastics Determination the	English PDF
GB/T 18743.1-2022	Thermoplastics pipes - Determination of impact strength of simply supported beams - Part 1: General test methods {译} 热塑性塑料管材简支梁冲击强度的测定第1部分：通用试验方法	China National Standards Plastics Determination the	English PDF
GB/T 2406.3-2022	Plastics - Determination of combustion behavior by the oxygen index method - Part 3: High temperature test {译} 塑料用氧指数法测定燃烧行为第3部分：高温试验	China National Standards Plastics Determination the	English PDF
GB/T 40611-2021	Plastics—Determination of aerobic biodegradation of non-floating plastic materials in a seawater/ sandy sediment interface—Method by measuring the oxygen demand in closed respirometer 塑料海水沙质沉积物界面非漂浮塑料材料最终需氧生物分解能力的测定通过测定密闭呼吸计内耗氧量的方法	China National Standards Plastics Determination the	English PDF
GB/T 40384-2021	Plastics—Determination of the transient extensional viscosity of polymer melts 塑料聚合物熔体瞬态拉伸黏度的测定	China National Standards Plastics Determination the	English PDF
GB/T 40367-2021	Plastics—Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment—Method by analysis of evolved carbon dioxide 塑料暴露于海洋沉积物中非漂浮材料最终需氧生物分解能力的测定通过分析释放的二氧化碳的方法	China National Standards Plastics Determination the	English PDF
GB/T 40280-2021	Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料液态或乳液态或分散体系的树脂用单筒旋转黏度计测定表观黏度	China National Standards Plastics Determination the	English PDF
GB/T 39715.3-2021	Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content 塑料生物基含量第3部分：生物基合成聚合物含量的测定	China National Standards Plastics Determination the	English PDF
GB/T 33047.3-2021	Plastics—Thermogravimetry (TG) of polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料聚合物热重法（TG）第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学	China National Standards Plastics Determination the	English PDF
GB/T 33047.2-2021	Plastics—Thermogravimetry (TG) of polymers—Part 2: Determination of activation energy 塑料聚合物热重法（TG）第2部分：活化能的测定	China National Standards Plastics Determination the	English PDF
GB/T 15596-2021	Plastics—Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources 塑料在玻璃过滤后太阳辐射、自然气候或实验室辐射源暴露后颜色和性能变化的测定	China National Standards Plastics Determination the	English PDF
GB/T 39818-2021	Plastics—Thermosetting moulding materials—Determination of shrinkage 塑料热固性模塑材料收缩率的测定	China National Standards Plastics Determination the	English PDF
GB/T 10006-2021	Plastics—Film and sheeting—Determination of the coefficients of friction 塑料薄膜和薄片摩擦系数的测定	China National Standards Plastics Determination the	English PDF
GB/T 40726-2021	Rubber-or plastics-coated fabrics—Determination of fogging characteristics of trim materials in the interior of automobiles 橡胶或塑料涂覆织物汽车内饰材料雾化性能的测定	China National Standards Plastics Determination the	English PDF
GB/T 38737-2020	Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料受控污泥消化系统中材料最终厌氧生物分解率测定采用测量释放生物气体的方法	China National Standards Plastics Determination the	English PDF
GB/T 1632.4-2020	Plastics—Determination of the viscosity of polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料使用毛细管黏度计测定聚合物稀溶液黏度第4部分：聚碳酸酯(PC)模塑和挤出材料	China National Standards Plastics Determination the	English PDF
GB/T 39385-2020	Plastics piping and ducting systems—Thermoplastics pipes—Determination of ring flexibility 塑料管道系统热塑性塑料管材环柔性的测定	China National Standards Plastics Determination the	English PDF
GB/T 18252-2020	Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统用外推法确定热塑性塑料材料以管材形式的长期静液压强度	China National Standards Plastics Determination the	English PDF
GB/T 38273.2-2019	Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties 塑料热塑性聚酯/酯和聚醚/酯模塑和挤塑弹性体第2部分：试样制备和性能测定	China National Standards Plastics Determination the	English PDF
GB/T 12009.5-2016	(Plastics - Aromatic isocyanates for the production of polyurethane - Part 5: Determination of acidity - amendment No. 1) 塑料聚氨酯生产用芳香族异氰酸酯第5部分：酸度的测定《第1号修改单》	China National Standards Plastics Determination the	English PDF
GB/T 37196-2018	Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定	China National Standards Plastics Determination the	English PDF
GB/T 36532-2018	Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics 纤维增强塑料热固性模塑料和预浸料固化特性测定	China National Standards Plastics Determination the	English PDF
GB/T 36800.2-2018	Plastics—Thermomechanical analysis(TMA)—Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature 塑料热机械分析法(TMA) 第2部分：线性热膨胀系数和玻璃化转变温度的测定	China National Standards Plastics Determination the	English PDF
GB/T 6111-2018	Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure 流体输送用热塑性塑料管道系统耐内压性能的测定	China National Standards Plastics Determination the	English PDF
GB/T 3682.2-2018	Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture 塑料热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法	China National Standards Plastics Determination the	English PDF
GB/T 3682.1-2018	Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method 塑料热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定第1部分：标准方法	China National Standards Plastics Determination the	English PDF
GB/T 34691.2-2017	Plastics—Thermoplastic polyester (TP) moulding and extrusion materials—Part 2: Preparation of test specimens and determination of properties 塑料热塑性聚酯(TP)模塑和挤出材料第2部分：试样制备和性能测定	China National Standards Plastics Determination the	English PDF
GB/T 33797-2017	Plastics—Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions—Method by analysis of released biogas 塑料在高固体份堆肥条件下最终厌氧生物分解能力的测定采用分析测定释放生物气体的方法	China National Standards Plastics Determination the	English PDF
GB/T 12000-2017	Plastics—Determination of the effects of exposure to damp heat,water spray and salt mist 塑料暴露于湿热、水喷雾和盐雾中影响的测定	China National Standards Plastics Determination the	English PDF
GB/T 32675-2016	Plastics—Phenloic resins—Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions 塑料酚醛树脂液体甲阶酚醛树脂在酸性条件下固化时假绝热温升的测定	China National Standards Plastics Determination the	English PDF
GB/T 32477-2016	Plastics—Determination of total chlorine content in toluene diisocyanates for use in the production of polyurethanes 塑料用于聚氨酯生产的甲苯二异氰酸酯中总氯含量的测定	China National Standards Plastics Determination the	English PDF
GB/T 32471-2016	Plastics—Determination of the isomer ratio in toluene diisocyanates for use in the production of polyurethanes 塑料用于聚氨酯生产的甲苯二异氰酸酯异构比的测定	China National Standards Plastics Determination the	English PDF
GB/T 12009.5-2016	Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 5: Determination of acidity 塑料聚氨酯生产用芳香族异氰酸酯第5部分：酸度的测定	China National Standards Plastics Determination the	English PDF
GB/T 12009.4-2016	Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 4: Determination of isocyanate content 塑料聚氨酯生产用芳香族异氰酸酯第4部分：异氰酸根含量的测定	China National Standards Plastics Determination the	English PDF
GB/T 12009.2-2016	Plastics—Aromatic isocyanates for use in the production of polyurethane—Part 2: Determination of hydrolysable chlorine 塑料聚氨酯生产用芳香族异氰酸酯第2部分：水解氯的测定	China National Standards Plastics Determination the	English PDF
GB/T 32378-2015	Glass-reinforced thermosetting plastics (GRP) pipes—Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions 玻璃纤维增强热固性塑料（GRP）管湿态环境下长期极限弯曲应变和长期极限相对环变形的测定	China National Standards Plastics Determination the	English PDF
GB/T 9647-2015	Thermoplastics pipes—Determination of ring stiffness 热塑性塑料管材环刚度的测定	China National Standards Plastics Determination the	English PDF
GB/T 32106-2015	Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system—Method by measurement of biogas production 塑料在水性培养液中最终厌氧生物分解能力的测定通过测量生物气体产物的方法	China National Standards Plastics Determination the	English PDF
GB/T 30925-2014	Plastics―Ethylene-vinyl acetate copolymer(EVAC) thermoplastics―Determination of vinyl acetate content 塑料乙烯-乙酸乙烯酯共聚物（EVAC）热塑性塑料乙酸乙烯酯含量的测定	China National Standards Plastics Determination the	English PDF
GB/T 25278-2010	Plastics - Determination of the fluidity of plastics using capillary and slit-die rheometers 塑料用毛细管和狭缝口模流变仪测定塑料的流动性	China National Standards Plastics Determination the	English PDF
GB/T 1632.3-2010	Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - part3: Polyethylenes and polypropylenes 塑料使用毛细管黏度计测定聚合物稀溶液黏度第3部分：聚乙烯和聚丙烯	China National Standards Plastics Determination the	English PDF
GB/T 12008.7-2010	Plastics - Polyether polyols - Part 7：Determination of viscosity 塑料聚醚多元醇第7部分：粘度的测定	China National Standards Plastics Determination the	English PDF
GB/T 12008.6-2010	Plastics - Polyether polyols - Part 6: Determination of degree of unsaturation 塑料聚醚多元醇第6部分：不饱和度的测定	China National Standards Plastics Determination the	English PDF
GB/T 12008.5-2010	Plastics - Polyether polyols - Part 5：Determination of acidity as acid number 塑料聚醚多元醇第5部分：酸值的测定	China National Standards Plastics Determination the	English PDF
GB/T 19466.6-2009	Plastics - Differential scanning calorimetry（DSC）- Part 6: Determination of oxidation induction time（isothermal OIT）and oxidation induction temperature（dynamic OIT）塑料差示扫描量热法（DSC）第6部分：氧化诱导时间(等温OIT)和氧化诱导温度（动态OIT）的测定	China National Standards Plastics Determination the	English PDF
GB/T 12008.4-2009	Plastics - Polyether polyols - Part 4: Determination of sodium and potassium 塑料聚醚多元醇第4部分：钠和钾的测定	China National Standards Plastics Determination the	English PDF
GB/T 12008.3-2009	Plastics - Polyether polyols - Part 3: Determination of hydroxyl number 塑料聚醚多元醇第3部分：羟值的测定	China National Standards Plastics Determination the	English PDF
GB/T 15596-2009	Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass，natural weathering or laboratory light sources 塑料在玻璃下日光、自然气候或实验室光源暴露后颜色和性能变化的测定	China National Standards Plastics Determination the	English PDF
GB/T 23296.1-2009	Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and th 食品接触材料塑料中受限物质塑料中物质向食品及食品模拟物特定迁移试验和含量测定方法以及食品模拟物暴露条件选择的指南	China National Standards Plastics Determination the	English PDF
GB/T 9639.1-2008	Plastics film and sheeting - Determination of impact resistance by the free-falling dart methord - Part 1: Staircase methords 塑料薄膜和薄片抗冲击性能试验方法自由落镖法第1部分：梯级法	China National Standards Plastics Determination the	English PDF
GB/T 18252-2008	Plastics piping and ducting systems - Determination of the long - term hydrostatic strength of thermoplastics materials in pipe form by extrapolation 塑料管道系统用外推法确定热塑性塑料材料以管材形式的长期静液压强度	China National Standards Plastics Determination the	English PDF
GB/T 5470-2008	Plastics - Determination of the brittleness temperature by impact 塑料冲击法脆化温度的测定	China National Standards Plastics Determination the	English PDF
GB/T 1632.5-2008	Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : Thermoplastic polyester(TP) homopolymers and copolymers 塑料使用毛细管粘度计测定聚合物稀溶液粘度第5部分：热塑性均聚和共聚型聚酯(TP)	China National Standards Plastics Determination the	English PDF
GB/T 4616-2008	Plastics - Phenolic moulding materials - Determination of acetone-soluble matter（apparent resin content of material in the unmoulded state）塑料　酚醛模塑料　丙酮可溶物（未模塑态材料的表观树脂含量）测定	China National Standards Plastics Determination the	English PDF
GB/T 2410-2008	Determination of the luminous transmittance and haze of transparent plastics 透明塑料透光率和雾度的测定	China National Standards Plastics Determination the	English PDF
GB/T 2407-2008	Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod 塑料硬质塑料小试样与炽热棒接触时燃烧特性的测定	China National Standards Plastics Determination the	English PDF
GB/T 22313-2008	Plastics - Polyols for use in the production of polyurethan - Determination of water content 塑料用于聚氨酯生产的多元醇水含量的测定	China National Standards Plastics Determination the	English PDF
GB/T 1632.1-2008	Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part1:General principles 塑料使用毛细管粘度计测定聚合物稀溶液粘度第1部分：通则	China National Standards Plastics Determination the	English PDF
GB/T 15223-2008	Plastics - Liquid resins - Determination of density by the pyknometer method 塑料液体树脂用比重瓶法测定密度	China National Standards Plastics Determination the	English PDF
GB/T 2412-2008	Plastics - Polypropylene(PP) and propylene copolymer thermoplastics - Determination of isotactic index 塑料聚丙烯(PP)和丙烯共聚物热塑性塑料等规指数的测定	China National Standards Plastics Determination the	English PDF
GB/T 22040-2008	Technical requirements and determination of weathering quality for plastics of highway furnatures 公路沿线设施塑料制品耐候性要求及测试方法	China National Standards Plastics Determination the	English PDF
GB/T 22047-2008	Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved 土壤中塑料材料最终需氧生物分解能力的测定采用测定密闭呼吸计中需氧量或测定释放的二氧化碳的方法	China National Standards Plastics Determination the	English PDF
GB/T 21989-2008	Plastics - Poly(vinyl chloride)pastes - Determination of apparent viscosity using the severs rheometer 塑料聚氯乙烯糊用Severs流变仪测定表观黏度	China National Standards Plastics Determination the	English PDF
GB/T 10799-2008	Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells 硬质泡沫塑料开孔和闭孔体积百分率的测定	China National Standards Plastics Determination the	English PDF
GB/T 21059-2007	Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate 塑料液态或乳液态或分散体系聚合物/树脂用旋转黏度计在规定剪切速率下黏度的测定	China National Standards Plastics Determination the	English PDF
GB/T 20673-2006	Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures 硬质泡沫塑料低于环境温度的线膨胀系数的测定	China National Standards Plastics Determination the	English PDF
GB/T 3139-2005	Fiber-reinforced plastics composites-Determination of thermal conductivity 纤维增强塑料导热系数试验方法	China National Standards Plastics Determination the	English PDF
GB/T 1446-2005	Fiber-reinforced plastics composites-The generals for determination of properties 纤维增强塑料性能试验方法总则	China National Standards Plastics Determination the	English PDF
GB/T 19811-2005	Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 在定义堆肥化中试条件下塑料材料崩解程度的测定	China National Standards Plastics Determination the	English PDF
GB/T 19687-2005	Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods) 闭孔塑料长期热阻变化的测定实验室加速测试方法	China National Standards Plastics Determination the	English PDF
GB/T 1634.3-2004	Plastics--Determination of temperature of deflection under load--Part 3:High-strength thermosetting laminates 塑料负荷变形温度的测定第3部分:高强度热固性层压材料	China National Standards Plastics Determination the	English PDF
GB/T 12000-2003	Determination of the effects of exposure to damp heat，water spray and salt mist for plastics 塑料暴露于湿热、水喷雾和盐雾中影响的测定	China National Standards Plastics Determination the	English PDF
GB/T 19280-2003	Thermoplastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test) 流体输送用热塑性塑料管材耐快速裂纹扩展(RCP)的测定小尺寸稳态试验(S4试验)	China National Standards Plastics Determination the	English PDF
GB/T 9647-2003	Thermoplastics pipes--Determination of ringstiffness 热塑性塑料管材环刚度的测定	China National Standards Plastics Determination the	English PDF
GB/T 18743-2002	Thermoplastics pipes for the transport of fluids--Determination of impact by the charpy method 流体输送用热塑性塑料管材简支梁冲击试验方法	China National Standards Plastics Determination the	English PDF
GB/T 8802-2001	Thermoplastics pipes and fitting--Determination of vicat softening temperature 热塑性塑料管材、管件维卡软化温度的测定	China National Standards Plastics Determination the	English PDF
GB/T 6671-2001	Thermoplastics pipes--Determination of longitudinal reversion 热塑性塑料管材纵向回缩率的测定	China National Standards Plastics Determination the	English PDF
GB/T 14152-2001	Thermoplastics pipes--Determination of resistance to external blows--Round-the-clock method 热塑性塑料管材耐外冲击性能试验方法时针旋转法	China National Standards Plastics Determination the	English PDF
GB/T 3682-2000	Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics 热塑性塑料熔体质量流动速率和熔体体积流动速率的测定	China National Standards Plastics Determination the	English PDF
GB/T 1633-2000	Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST) 热塑性塑料维卡软化温度(VST)的测定	China National Standards Plastics Determination the	English PDF
GB/T 18042-2000	Thermoplastics pipes--Determination of creep ratio 热塑性塑料管材蠕变比率的试验方法	China National Standards Plastics Determination the	English PDF
GB/T 11998-1989	Determination of glass transitiontemperature of plastics--Thermomechanical analysis 塑料玻璃化温度测定方法热机械分析法	China National Standards Plastics Determination the	English PDF
GB/T 10006-1988	Plastics--Film and sheeting--Determination of the coefficients of friction 塑料薄膜和薄片摩擦系数测定方法	China National Standards Plastics Determination the	English PDF
GB/T 12009.4-2016	(Plastics - Aromatic isocyanates for the production of polyurethane - Part 4: Determination of isocyanate content - amendment No. 1) 塑料聚氨酯生产用芳香族异氰酸酯第4部分：异氰酸根含量的测定《第1号修改单》	China National Standards Plastics Determination the	English PDF

Find out:93Items | To Page of: First -Previous-Next -Last | 1

- Since 2001 -
Focus on China Standards & Compliance Services

www.gbstandards.org
China National Standards