Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 39560.12-2024 |
Determination of certain substances in electronic and electrical products-Part 12: Simultaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in Polymers by gas chromatography-mass spectrometry {译} 电子电气产品中某些物质的测定-第12部分：气相色谱-质谱法同时测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯 |
China National Standards Polymer |
 English PDF |
| GB/T 5169.23-2024 |
Fire hazard tests for electrical and electronic products - Part 23: Test flame - 500W vertical flame test method for Polymer tubular materials {译} 电工电子产品着火危险试验-第23部分：试验火焰-聚合物管形材料500W垂直火焰试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 7716-2024 |
Polymer grade propylene {译} 聚合级丙烯 |
China National Standards Polymer |
English PDF |
| GB/T 17737.10-2024 |
Coaxial communication cables - Part 10: Sectional specification for fluoroPolymer insulated semi-rigid cables {译} 同轴通信电缆-第10部分：含氟聚合物绝缘半硬电缆分规范 |
China National Standards Polymer |
English PDF |
| GB/T 43297-2023 |
Plastics—Methods for evaluating photoaging properties of Polymers—Fourier transform infrared spectroscopy and UV/visible spectroscopy {译} 塑料 聚合物光老化性能评估方法 傅里叶红外光谱和紫外/可见光谱法 |
China National Standards Polymer |
English PDF |
| GB/T 43086-2023 |
Plastics Polymer dispersions Determination of sieve residue {译} 塑料 聚合物分散体 筛余物的测定 |
China National Standards Polymer |
English PDF |
| GB/T 43085-2023 |
Plastics Polymer dispersions Determination of free formaldehyde content {译} 塑料 聚合物分散体 游离甲醛含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 43084.2-2023 |
Plastics - FluoroPolymer dispersions, molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 含氟聚合物分散体、模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards Polymer |
English PDF |
| GB/T 43084.1-2023 |
Plastics - FluoroPolymer dispersions, molding and extrusion materials - Part 1: Nomenclature system and basis for classification {译} 塑料 含氟聚合物分散体、模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards Polymer |
English PDF |
| GB/T 26518-2023 |
Polymer reinforced composite waterproof sheet {译} 高分子增强复合防水片材 |
China National Standards Polymer |
English PDF |
| GB/T 42870-2023 |
Non-destructive testing Acoustic emission testing methods and evaluation criteria for fiber-reinforced Polymers {译} 无损检测 纤维增强聚合物的声发射检测方法和评价准则 |
China National Standards Polymer |
English PDF |
| GB/T 42790-2023 |
Acrylic coPolymer polyvinyl chloride resin {译} 丙烯酸共聚聚氯乙烯树脂 |
China National Standards Polymer |
English PDF |
| GB/T 7139-2023 |
Plastics. HomoPolymers and copolymers of vinyl chloride. Determination of chlorine content. {译} 塑料 氯乙烯均聚物和共聚物 氯含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 41638.2-2023 |
Plastics - Carbon and environmental footprints of bio-based plastics - Part 2: Carbon footprint of materials - Amount (mass) of CO2 incorporated into Polymer molecules from the air {译} 塑料 生物基塑料的碳足迹和环境足迹 第2部分：材料碳足迹 由空气中并入到聚合物分子中CO2的量（质量） |
China National Standards Polymer |
English PDF |
| GB/T 42544-2023 |
Corrosion evaluation of aluminum and aluminum alloy anodic oxidation film and organic Polymer film - grid method {译} 铝及铝合金阳极氧化膜及有机聚合物膜的腐蚀评定 栅格法 |
China National Standards Polymer |
English PDF |
| GB/T 42514-2023 |
Corrosion assessment of aluminum and aluminum alloy anodic oxidation film and organic Polymer film - chart method {译} 铝及铝合金阳极氧化膜及有机聚合物膜的腐蚀评定 图表法 |
China National Standards Polymer |
English PDF |
| GB/T 42618-2023 |
Additive Manufacturing Design Laser Powder Bed Fusion of Polymer Materials {译} 增材制造 设计 高分子材料激光粉末床熔融 |
China National Standards Polymer |
English PDF |
| GB/Z 28820.4-2022 |
Long-term radiation aging of Polymers - Part 4: Effect of different temperatures and dose rates under radiation conditions {译} 聚合物长期辐射老化 第4部分：辐射条件下不同温度和剂量率的影响 |
China National Standards Polymer |
English PDF |
| GB/T 12967.6-2022 |
Test methods for anodic oxidation coatings and organic Polymer coatings on aluminium and aluminium alloys—Part 6: Determination of color and appearance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第6部分：色差和外观质量 |
China National Standards Polymer |
English PDF |
| GB/T 12967.5-2022 |
Test methods for anodic oxidation coatings and organic Polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第5部分：抗破裂性的测定 |
China National Standards Polymer |
English PDF |
| GB/T 12967.4-2022 |
Test methods for anodic oxidation coatings and organic Polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第4部分：耐光热性能的测定 |
China National Standards Polymer |
English PDF |
| GB/T 12967.3-2022 |
Test methods for anodic oxidation coatings and organic Polymer coatings on aluminium and aluminium alloys—Part 3 : Salt spray test 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第3部分：盐雾试验 |
China National Standards Polymer |
English PDF |
| GB/T 18944.2-2022 |
Flexible cellular Polymeric materials—Sponge and expanded cellular rubber products—Specification—Part 2：Mouldings and extrusions 柔性多孔聚合物材料 海绵和发泡橡胶制品 规范 第2部分：模制品与挤出制品 |
China National Standards Polymer |
English PDF |
| GB/T 28817-2022 |
Single cell test methods for Polymer electrolyte fuel cell (PEFC) 聚合物电解质燃料电池单电池测试方法 |
China National Standards Polymer |
English PDF |
| GB/T 8754-2022 |
Anodic oxidation coatings and organic Polymer coatings on aluminium and aluminium alloys—Determination of electrical insulation 铝及铝合金阳极氧化膜及有机聚合物膜 绝缘性的测定 |
China National Standards Polymer |
English PDF |
| GB/T 30918-2022 |
Evaluation method of non-oil-extended solution Polymerized isoprene rubber (IR) {译} 非充油溶液聚合型异戊二烯橡胶（IR） 评价方法 |
China National Standards Polymer |
English PDF |
| GB/T 42266-2022 |
Flexible porous Polymeric materials - Laboratory evaluation of the combustion characteristics of small specimens in the horizontal direction under a small flame {译} 柔性多孔聚合物材料 小试样在小火焰下水平方向燃烧特性的实验室评估 |
China National Standards Polymer |
English PDF |
| GB/T 42258-2022 |
Determination of Fatigue Properties of Flexible Porous Polymer Materials by Constant Deformation Method {译} 柔性多孔聚合物材料 恒定形变法测定疲劳性能 |
China National Standards Polymer |
English PDF |
| GB/T 42267-2022 |
Determination of compression set of flexible porous Polymeric materials under wet conditions {译} 柔性多孔聚合物材料 在潮湿条件下压缩永久变形的测定 |
China National Standards Polymer |
English PDF |
| GB/T 41938-2022 |
Rubber compounding agent - Precipitated hydrated silica - Evaluation method in mixtures of solution-Polymerized styrene-butadiene rubber (S-SBR) and butadiene rubber (BR) {译} 橡胶配合剂 沉淀水合二氧化硅 在溶聚丁苯橡胶(S-SBR)和丁二烯橡胶(BR)混合物中的评价方法 |
China National Standards Polymer |
English PDF |
| GB/T 41955-2022 |
Non-opening compression test method for multidirectional laminates of Polymer matrix composites {译} 聚合物基复合材料多向层合板无开孔压缩试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 41931-2022 |
Plastics/Rubber Polymer Dispersions and Synthetic Rubber Latex Freeze-Thaw Cycle Stability Test {译} 塑料/橡胶 聚合物分散体和合成橡胶胶乳 冻融循环稳定性试验 |
China National Standards Polymer |
English PDF |
| GB/T 41936.2-2022 |
Plastics - Determination of torsional rigidity of flexible materials - Part 2: Plasticized vinyl chloride homoPolymers and copolymers {译} 塑料 柔性材料扭转刚度的测定 第2部分: 增塑氯乙烯均聚物和共聚物 |
China National Standards Polymer |
English PDF |
| GB/T 42238-2022 |
Surfactants - Determination of free propylene oxide in propylene oxide Polymeric surfactants - Gas chromatography {译} 表面活性剂 环氧丙烷聚合型表面活性剂中游离环氧丙烷的测定 气相色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 41767-2022 |
Test method for moisture absorption performance and equilibrium state adjustment of Polymer matrix composites {译} 聚合物基复合材料吸湿性能及平衡状态调节试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 1844.1-2022 |
Plastics - Symbols and abbreviations - Part 1: Base Polymers and their characteristic properties {译} 塑料 符号和缩略语 第1部分：基础聚合物及其特征性能 |
China National Standards Polymer |
English PDF |
| GB/T 41877.1-2022 |
Plastics - Ethylene-vinyl alcohol (EVOH) coPolymer molding and extrusion materials - Part 1: Nomenclature system and basis of classification {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Polymer |
English PDF |
| GB/T 41877.2-2022 |
Plastics - Ethylene-vinyl alcohol (EVOH) coPolymer molding and extrusion materials - Part 2: Specimen preparation and property determination {译} 塑料 乙烯-乙烯醇（EVOH）共聚物模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Polymer |
English PDF |
| GB/T 41879-2022 |
Plastics - Burning behavior - Medium-scale fire tests of fiber-reinforced Polymer composites {译} 塑料 燃烧性能 纤维增强聚合物复合材料的中等尺寸耐火测试 |
China National Standards Polymer |
English PDF |
| GB/T 40440-2021 |
Plastics—Extruded sheets of impact-modified acrylonitrile-styrene coPolymers(ABS,AEPDS and ASA)—Requirements and test methods 塑料制品 抗冲击改性丙烯腈-苯乙烯共聚物(ABS、AEPDS和ASA)挤出板材 要求和试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 40384-2021 |
Plastics—Determination of the transient extensional viscosity of Polymer melts 塑料 聚合物熔体瞬态拉伸黏度的测定 |
China National Standards Polymer |
English PDF |
| GB/T 40396-2021 |
Test method for glass transition temperature of Polymer matrix composites—Dynamic mechanical analysis（DMA） 聚合物基复合材料玻璃化转变温度试验方法 动态力学分析法（DMA） |
China National Standards Polymer |
English PDF |
| GB/T 39715.3-2021 |
Plastics—Biobased content—Part 3:Determination of biobased synthetic Polymer content 塑料 生物基含量 第3部分：生物基合成聚合物含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 33047.3-2021 |
Plastics—Thermogravimetry (TG) of Polymers—Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics 塑料 聚合物热重法（TG） 第3部分：使用 Ozawa-Friedman 绘图测定活化能和分析反应动力学 |
China National Standards Polymer |
English PDF |
| GB/T 33047.2-2021 |
Plastics—Thermogravimetry (TG) of Polymers—Part 2: Determination of activation energy 塑料 聚合物热重法（TG） 第2部分：活化能的测定 |
China National Standards Polymer |
English PDF |
| GB/T 8013.5-2021 |
Anodic oxide coatings and organic Polymer coatings on aluminium and its alloys—Part 5: Function coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第5部分：功能膜 |
China National Standards Polymer |
English PDF |
| GB/T 8013.4-2021 |
Anodic oxide coatings and organic Polymer coatings on aluminium and its alloys—Part 4: Texture coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第4部分：纹理膜 |
China National Standards Polymer |
English PDF |
| GB/T 40260-2021 |
Test method for determining gas permeability of Polymer membrane materials 高分子膜材料气体渗透性能测试方法 |
China National Standards Polymer |
English PDF |
| GB/T 39748.9-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing Polymer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分：称重法测定密度 |
China National Standards Polymer |
English PDF |
| GB/T 39748.8-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing Polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 |
China National Standards Polymer |
English PDF |
| GB/T 39748.7-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing Polymer-based absorbent materials—Part 7:Gravimetric determination of absorption under pressure 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第7部分：称重法测定压力作用下的吸液量 |
China National Standards Polymer |
English PDF |
| GB/T 39748.6-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing Polymer-based absorbent materials—Part 6:Gravimetric determination of fluid retention capacity in saline solution after centrifugation 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第 6 部分: 称重法测定离心后的生理盐水保液率 |
China National Standards Polymer |
English PDF |
| GB/T 39748.11-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing Polymer-based absorbent materials—Part 11:Determination of content of respirable particles 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第11部分：可吸入颗粒含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 39748.10-2021 |
Urine-absorbing aids for incontinence -- Test methods for characterizing Polymer-based absorbent materials -- Part 10: Determination of extractable polymer content by potentiometric titration 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测定方法 第10部分：电位滴定法测定可萃取聚合物量 |
China National Standards Polymer |
English PDF |
| GB/T 41003.1-2021 |
General technical specification for plastic foam mats—Part 1:Polyethylene/ethylene vinylacetate coPolymer foam mats for children 塑料泡沫垫通用技术条件 第1部分：聚乙烯/乙烯-醋酸乙烯酯共聚物儿童泡沫垫 |
China National Standards Polymer |
English PDF |
| GB/T 40722.2-2021 |
Styrene-butadiene rubber(SBR) -- Determination of the microstructure of solution-Polymerized SBR -- Part 2: FTIR with ATR method 苯乙烯-丁二烯橡胶（SBR）? 溶液聚合SBR微观结构的测定? 第2部分：红外光谱ATR 法 |
China National Standards Polymer |
English PDF |
| GB/T 39560.8-2021 |
Determination of certain substances in electrical and electronic products—Part 8:Phthalates in Polymers by gas chromatography-mass spectrometry (GC-MS),gas chromatography-mass spectrometry using a pyrolyzer/thermaldesorption accessory (Py/TD-GC-MS) 电子电气产品中某些物质的测定 第8部分：气相色谱-质谱法（GC-MS）与配有热裂解/热脱附的气相色谱-质谱法 （Py/TD-GC-MS）测定聚合物中的邻苯二甲酸酯 |
China National Standards Polymer |
English PDF |
| GB/T 39560.702-2021 |
Determination of certain substances in electrical and electronic products—Part 7-2:Hexavalent chrome—Determination of hexavalent chrome[Cr(VI)]in Polymers and electronics by the colormetric method 电子电气产品中某些物质的测定 第7-2部分：六价铬 比色法测定聚合物和电子件中的六价铬[Cr（VI）] |
China National Standards Polymer |
English PDF |
| GB/T 39560.5-2021 |
Determination of certain substances in electrical and electronic products—Part 5: Cadmium，lead and chromium in Polymers and electronics and cadmium and lead in metals by AAS，AFS，ICP-OES and ICP-MS 电子电气产品中某些物质的测定 第5部分： AAS、AFS、ICP-OES和ICP-MS法测定聚合物和电子件中镉、铅、铬以及金属中镉、铅的含量 |
China National Standards Polymer |
English PDF |
| GB/T 39560.4-2021 |
Determination of certain substances in electrical and electronic products—Part 4: Mercury in Polymers, metals and electronics by CV-AAS, CV-AFS , ICP-OES and ICP-MS 电子电气产品中某些物质的测定 第4部分：CV-AAS、CV-AFS、ICP-OES和ICP-MS测定聚合物、金属和电子件中的汞 |
China National Standards Polymer |
English PDF |
| GB/T 1232.3-2021 |
Rubber,unvulcanized—Determinations using a shearing-disc viscometer—Part 3:Determination of the Delta Mooney value for non-pigmented,oil-extended emulsion-Polymerized SBR 未硫化橡胶 用圆盘剪切黏度计进行测定 第3部分：无填料的充油乳液聚合型苯乙烯-丁二烯橡胶Delta门尼值的测定 |
China National Standards Polymer |
English PDF |
| GB/T 6346.24-2021 |
Fixed capacitors for use in electronic equipment—Part 24: Sectional specification—Fixed tantalum electrolytic surface mount capacitors with conductive Polymer solid electrolyte 电子设备用固定电容器 第24部分：分规范 表面安装导电聚合物固体电解质钽固定电容器 |
China National Standards Polymer |
English PDF |
| GB/T 22875-2018 |
Super-absorbent Polymer for sanitary towel and diapers 纸尿裤和卫生巾用高吸收性树脂+第1号修改单 |
China National Standards Polymer |
English PDF |
| GB/T 12967.1-2020 |
Test methods for anodic oxidation coatings and organic Polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance 铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第1部分：耐磨性的测定 |
China National Standards Polymer |
English PDF |
| GB/T 38534-2020 |
Test method for tensile properties of oriented fibre reinforced Polymer matrix composite materials at ultra-low temperature 定向纤维增强聚合物基复合材料超低温拉伸性能试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 39560.6-2020 |
Determination of certain substances in electrical and electronic products—Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in Polymers by gas chromatography-mass spectrometry（GC-MS） 电子电气产品中某些物质的测定 第6部分：气相色谱-质谱仪（GC-MS）测定聚合物中的多溴联苯和多溴二苯醚 |
China National Standards Polymer |
English PDF |
| GB/T 1632.4-2020 |
Plastics—Determination of the viscosity of Polymers in dilute solution using capillary viscometers—Part 4:Polycarbonate(PC) moulding and extrusion materials 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第4部分：聚碳酸酯(PC)模塑和挤出材料 |
China National Standards Polymer |
English PDF |
| GB/T 39699-2020 |
Rubber—Identification of Polymers—Pyrolytic gas-chromatographic method using mass-spectrometric detection 橡胶 聚合物的鉴定 裂解气相色谱-质谱法 |
China National Standards Polymer |
English PDF |
| GB/T 35465.6-2020 |
Test method for fatigue properties of Polymer matrix composite materials—Part 6:Fatige properties of adhesives in shear by tension 聚合物基复合材料疲劳性能测试方法 第6部分：胶粘剂拉伸剪切疲劳 |
China National Standards Polymer |
English PDF |
| GB/T 35465.5-2020 |
Test method for fatigue properties of Polymer matrix composite materials—Part 5: Flexural fatigue 聚合物基复合材料疲劳性能测试方法 第5部分：弯曲疲劳 |
China National Standards Polymer |
English PDF |
| GB/T 35465.4-2020 |
Test method for fatigue properties of Polymer matrix composite materials—Part 4: Tension-compression fatigue and compression-compression fatigue 聚合物基复合材料疲劳性能测试方法 第4部分：拉-压和压-压疲劳 |
China National Standards Polymer |
English PDF |
| GB/T 20202-2019 |
Ethylene-vinyl acetate coPolymer (EVA) blown covering film for agriculture 农业用乙烯-乙酸乙烯酯共聚物（EVA）吹塑棚膜 |
China National Standards Polymer |
English PDF |
| GB/T 50639-2019 |
Standard for design of polyamide Polymer and fiber plant 锦纶工厂设计标准 |
China National Standards Polymer |
English PDF |
| GB/T 22079-2019 |
HV Polymeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则 |
China National Standards Polymer |
English PDF |
| GB/T 38421-2019 |
Fur—Detection of animal derived material—Qualitative real-time Polymerase chain reaction (PCR) methods 毛皮 源性成分检测 实时荧光定性聚合酶链式反应（PCR）检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 22079-2019 |
HV Polymeric insulators for indoor and outdoor use—General definitions ,test methods and acceptance criteria 户内和户外用高压聚合物绝缘子 一般定义、试验方法和接收准则 |
China National Standards Polymer |
English PDF |
| GB/T 20202-2019 |
Ethylene-vinyl acetate coPolymer (EVA) blown covering film for agriculture 农业用乙烯-乙酸乙烯酯共聚物（EVA）吹塑棚膜 |
China National Standards Polymer |
English PDF |
| GB/T 8826-2019 |
Rubber antioxidant—Polymerized 2,2,4-trimethyl-1,2-dihydroquinoline (TMQ) 橡胶防老剂 2,2,4-三甲基-1,2-二氢化喹啉聚合物（TMQ） |
China National Standards Polymer |
English PDF |
| GB/T 37388-2019 |
Solution-Polymerized styrene butadiene rubber（SSBR） 溶液聚合型苯乙烯-丁二烯橡胶（SSBR） |
China National Standards Polymer |
English PDF |
| GB/T 37101-2018 |
Determination of 3,3’-dichloro-4,4’-diaminodiphenylmethane in Polymeric materials—Gas chromatography-mass spectrography 聚合物材料中3,3-二氯-4,4-二氨基二苯基甲烷的测定-气相色谱-质谱法 |
China National Standards Polymer |
English PDF |
| GB/T 36965-2018 |
Test method for cross-linking degree of ethylene-vinyl acetate coPolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC） 光伏组件用乙烯—醋酸乙烯共聚物交联度测试方法-差示扫描量热法 |
China National Standards Polymer |
English PDF |
| GB/T 29848-2018 |
Ethylene-vinyl acetate coPolymer (EVA) film for PV module 光伏组件封装用乙烯-醋酸乙烯酯共聚物(EVA)胶膜 |
China National Standards Polymer |
English PDF |
| GB/T 37196-2018 |
Plastics—Polyether polyols/Polymeric polyols—Determination of aldehydes and ketones 塑料-聚醚多元醇聚合物多元醇-醛酮含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 8656-2018 |
Emulsion-and solution-Polymerized styrene-butadiene rubber(SBR)—Evaluation procedures 乳液和溶液聚合型苯乙烯-丁二烯橡胶（SBR）-评价方法 |
China National Standards Polymer |
English PDF |
| GB/T 8660-2018 |
Solution Polymerized butadiene rubber（BR)—Evaluation procedures 溶液聚合型丁二烯橡胶（BR）-评价方法 |
China National Standards Polymer |
English PDF |
| GB/T 36214.5-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of Polymers using size-exclusion chromatography—Part5:Method using light-scattering detection 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分：光散射法 |
China National Standards Polymer |
English PDF |
| GB/T 8013.1-2018 |
Anodic oxide coatings and organic Polymer coatings on aluminium and its alloys—Part 1: Anodic oxide coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第1部分：阳极氧化膜 |
China National Standards Polymer |
English PDF |
| GB/T 36214.4-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of Polymers using size-exclusion chromatography—Part4:High-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法 |
China National Standards Polymer |
English PDF |
| GB/T 36214.2-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of Polymers using size-exclusion chromatography—Part 2:Universal calibration method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法 |
China National Standards Polymer |
English PDF |
| GB/T 36214.3-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of Polymers using size-exclusion chromatography—Part 3:Low-temperature method 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法 |
China National Standards Polymer |
English PDF |
| GB/T 36214.1-2018 |
Plastics—Determination of average molecular mass and molecular mass distribution of Polymers using size-exclusion chromatography—Part 1:General principles 塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分：通则 |
China National Standards Polymer |
English PDF |
| GB/T 8013.3-2018 |
Anodic oxide coatings and organic Polymer coatings on aluminium and its alloys—Part 3: Organic polymer coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第3部分：有机聚合物涂膜 |
China National Standards Polymer |
English PDF |
| GB/T 8013.2-2018 |
Anodic oxide coatings and organic Polymer coatings on aluminium and its alloys—Part 2: Combined coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第2部分:阳极氧化复合膜 |
China National Standards Polymer |
English PDF |
| GB/T 35083.2-2018 |
Plain bearings—Testing of the tribological behaviour of bearing materials—Part 2: Testing of Polymer-based bearing materials 滑动轴承 轴承材料摩擦学特性试验 第2部分: 聚合物轴承材料试验 |
China National Standards Polymer |
English PDF |
| GB/T 36262-2018 |
Fiber reinforced Polymer composite grids for civil engineering 结构工程用纤维增强复合材料网格 |
China National Standards Polymer |
English PDF |
| GB/T 36159-2018 |
Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic Polymer coatings on aluminium and its alloys in architectural applications 建筑用铝及铝合金表面阳极氧化膜及有机聚合物膜层、性能、检测方法的选择 |
China National Standards Polymer |
English PDF |
| GB/T 6346.26-2018 |
Fixed capacitors for use in electronic equipment—Part 26: Sectional specification—Fixed aluminium electrolytic capacitors with conductive Polymer solid electrolyte 电子设备用固定电容器 第26部分：分规范 导电高分子固体电解质铝固定电容器 |
China National Standards Polymer |
English PDF |
| GB/T 36374.1-2018 |
Plastics-Sulfone Polymer moulding and extrusion materials—Part1:Designation system and basis for specifications 塑料 砜聚合物模塑和挤出材料 第1部分：命名系统和分类基础 |
China National Standards Polymer |
English PDF |
| GB/T 36374.2-2018 |
Plastics—Sulfone Polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties 塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定 |
China National Standards Polymer |
English PDF |
| GB/T 6346.2601-2018 |
Fixed capacitors for use in electronic equipment—Part 26-1:Blank detail specification—Fixed aluminium electrolytic capacitors with conductive Polymer solid electrolyte—Assessment level EZ 电子设备用固定电容器 第26-1部分：空白详细规范 导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards Polymer |
English PDF |
| GB/T 36755-2018 |
BST DNA Polymerase BST DNA聚合酶 |
China National Standards Polymer |
English PDF |
| GB/T 36820-2018 |
Detection method of Sugarcane streak mosaic virus by real-time reverse transcription Polymerase chain reaction（RT-PCR） 甘蔗条纹花叶病毒实时荧光反转录聚合酶链式反应（RT-PCR）检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 19495.4-2018 |
Detection of genetically modified organisms and derived products—Qualitative real-time Polymerase chain reaction（PCR） methods 转基因产品检测 实时荧光定性聚合酶链式反应（PCR）检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 19495.5-2018 |
Detection of genetically modified organisms and derived products—Quantitative real-time Polymerase chain reaction（PCR） methods 转基因产品检测 实时荧光定量聚合酶链式反应（PCR）检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 35859-2018 |
Determination of ethylene glycol monoethyl ether insoluble contents in Polymer materials for offset printing plates—Filtering method 胶印版材用高聚物中乙二醇单乙醚不溶物含量的测定 过滤法 |
China National Standards Polymer |
English PDF |
| GB/T 35847-2018 |
Switchable glazing filmed by Polymer dispersed liquid crystal 电致液晶贴膜调光玻璃 |
China National Standards Polymer |
English PDF |
| GB/T 35927-2018 |
Standard practice for identification of Polymer layers or inclusions by fourier transform infrared microspectroscopy 傅里叶变换显微红外光谱法识别聚合物层或夹杂物的标准规程 |
China National Standards Polymer |
English PDF |
| GB/T 6346.2501-2018 |
Fixed capacitors for use in electronic equipment—Part 25:Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive Polymer solid electrolyte 电子设备用固定电容器 第25-1部分：空白详细规范 表面安装导电高分子固体电解质铝固定电容器 评定水平EZ |
China National Standards Polymer |
English PDF |
| GB/T 6346.25-2018 |
Fixed capacitors for use in electronic equipment—Part 25: Sectional specification—Fixed aluminium electrolytic surface mount capacitors with conductive Polymer solid electrolyte 电子设备用固定电容器 第25部分：分规范 表面安装导电高分子固体电解质铝固定电容器 |
China National Standards Polymer |
English PDF |
| GB/T 34777-2017 |
Detection of residual DNA in biological product which expressed from Chinese hamster ovary(CHO) cell—Fluorescent quantitative Polymerase chain reaction assay 中国仓鼠卵巢（CHO）细胞表达产品残留DNA检测 荧光定量PCR法 |
China National Standards Polymer |
English PDF |
| GB/T 34551-2017 |
Test method for alkali resistance of glass fiber reinforced Polymer bars in high temperature condition 玻璃纤维增强复合材料筋高温耐碱性试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 34557-2017 |
Latex and redispersible Polymer powder for mortar and concrete 砂浆、混凝土用乳胶和可再分散乳胶粉 |
China National Standards Polymer |
English PDF |
| GB/T 34408-2017 |
Detection of bovine, ovine and porcine derived materials in leather by qualitative Polymerase chain reaction (PCR) method 天然皮革牛、羊、猪源性成分定性PCR检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 34445-2017 |
Test method of hot-tack property for heat sealing surfaces of thermoplastic Polymer and thermoplastic composite material 热塑性塑料及其复合材料热封面热粘性能测定 |
China National Standards Polymer |
English PDF |
| GB/T 33622-2017 |
Flexible cellular Polymeric materials—Low-temperature flex test 软质泡沫聚合材料 低温柔性试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 33609-2017 |
Flexible cellular Polymeric materials—Determination of hysteresis loss 软质泡沫聚合材料 滞后损失试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 33614-2017 |
Test method for compression properties of 3D braided fabric and its Polymer matrix composites 三维编织物及其树脂基复合材料压缩性能试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 33613-2017 |
Test method for tensile properties of 3D braided fabric and its Polymer matrix composites 三维编织物及其树脂基复合材料拉伸性能试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 33621-2017 |
Test method for bending properties of 3D braided fabric and its Polymer matrix composites 三维编织物及其树脂基复合材料弯曲性能试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 33070-2016 |
1-Vinyl-2-pyrrolidinone homoPolymer for industrial use 工业用聚N-乙烯基吡咯烷酮 |
China National Standards Polymer |
English PDF |
| GB/T 35156-2017 |
Fiber reinforced Polymer composites structural cables 结构用纤维增强复合材料拉索 |
China National Standards Polymer |
English PDF |
| GB/T 35542-2017 |
Taq DNA Polymerase Taq DNA聚合酶 |
China National Standards Polymer |
English PDF |
| GB/T 16886.13-2017 |
Biological evaluation of medical devices—Part 13: Identification and quantification of degradation products from Polymeric medical devices 医疗器械生物学评价 第13部分：聚合物医疗器械降解产物的定性与定量 |
China National Standards Polymer |
English PDF |
| GB/T 35465.2-2017 |
Test method for fatigue properties of Polymer matrix composite materials -Part 2: Statistical analysis of linear or linearized stress-life(S-N) and strain-life(ε-N) fatigue data 聚合物基复合材料疲劳性能测试方法 第2部分：线性或线性化应力寿命（S-N）和应变寿命（ε-N）疲劳数据的统计分析 |
China National Standards Polymer |
English PDF |
| GB/T 35465.3-2017 |
Test method for fatigue properties of Polymer matrix composite materials -Part 3: Tension-tension fatigue 聚合物基复合材料疲劳性能测试方法 第3部分：拉-拉疲劳 |
China National Standards Polymer |
English PDF |
| GB/T 35465.1-2017 |
Test method for fatigue properties of Polymer matrix composite materials—Part 1：General principle 聚合物基复合材料疲劳性能测试方法 第1部分：通则 |
China National Standards Polymer |
English PDF |
| GB/T 35541-2017 |
pfu DNA Polymerase pfu DNA聚合酶 |
China National Standards Polymer |
English PDF |
| GB/T 33047.1-2016 |
Plastics—Thermogravimetry (TG) of Polymers—Part 1: General principles 塑料 聚合物热重法（TG） 第1部分：通则 |
China National Standards Polymer |
English PDF |
| GB/T 33069-2016 |
Determination of 1-vinyl-2-pyrrolidinone homoPolymer for industrial use 工业用聚N-乙烯基吡咯烷酮检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 32120-2015 |
Covering anticorrosion technology of oxiditive Polymerization for steel structures 钢结构氧化聚合型包覆防腐蚀技术 |
China National Standards Polymer |
English PDF |
| GB/T 31956-2015 |
Glass fiber reinforced phenolic Polymer panel for the construction 建筑用玻璃纤维增强酚醛树脂板 |
China National Standards Polymer |
English PDF |
| GB/T 31984-2015 |
Test method for determining the content of vinyl acetate in ethylene-vinyl acetate coPolymer applied in photovoltaic modules—Thermal gravimetric analysis (TGA) 光伏组件用乙烯-醋酸乙烯共聚物中醋酸乙烯酯含量测试方法 热重分析法（TGA） |
China National Standards Polymer |
English PDF |
| GB/T 31816-2015 |
Water treatment chemicals—Determination of the molecular weight and molecular weight distribution of Polymers—Gel filtration chromatography 水处理剂 聚合物分子量及其分布的测定 凝胶色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 31539-2015 |
Pultruded fiber reinforced Polymer composites structural profiles 结构用纤维增强复合材料拉挤型材 |
China National Standards Polymer |
English PDF |
| GB/T 18173.3-2014 |
Polymer water-proof materials―Part 3：Hydrophilic expasion rubber 高分子防水材料 第3部分：遇水膨胀橡胶 |
China National Standards Polymer |
English PDF |
| GB/T 31062-2014 |
Polymeric polyols 聚合物多元醇 |
China National Standards Polymer |
English PDF |
| GB/T 14837.1-2014 |
Rubber and rubber products―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 1：Butadiene, ethylene-propylene coPolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers 橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第1部分：丁二烯橡胶、乙烯-丙烯二元和三元共聚物、异丁烯-异戊二烯橡胶、异戊二烯橡胶、苯乙烯-丁二烯橡胶 |
China National Standards Polymer |
English PDF |
| GB 18173.2-2014 |
Polymer water-proof materials―Part 2: waterstop 高分子防水材料 第2部分：止水带 |
China National Standards Polymer |
English PDF |
| GB/T 3356-2014 |
Test method for flexural properties of orientational fiber reinforced Polymer metrix composite materials 定向纤维增强聚合物基复合材料弯曲性能试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 3355-2014 |
Test method for in-plane shear response of Polymer matrix composite materials 聚合物基复合材料纵横剪切试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 3354-2014 |
Test method for tensile properties of orientation fiber reinforced Polymer matrix composite materials 定向纤维增强聚合物基复合材料拉伸性能试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 30970-2014 |
Test method for the shear properties of Polymer matrix composite materials by V-notched beam method 聚合物基复合材料剪切性能V型缺口梁试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 30969-2014 |
Test method for short-beam shear strength of Polymer matrix composite materials 聚合物基复合材料短梁剪切强度试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 30968.4-2014 |
Test method for open-hole/loaded-hole of Polymer matrix composite laminates―Part 4: Test method of open-hole compressive strength 聚合物基复合材料层合板开孔/受载孔性能试验方法 第4部分：开孔压缩强度试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 30968.3-2014 |
Test method for open-hole/loaded-hole of Polymer matrix composite laminates―Part 3: Test method of open-hole tensile strength strength 聚合物基复合材料层合板开孔/受载孔性能试验方法 第3部分：开孔拉伸强度试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 30968.2-2014 |
Test method for open-hole/loaded-hole of Polymer matrix composite laminates―Part 2: Test method of filled-hole tension and compression 聚合物基复合材料层合板开孔/受载孔性能试验方法 第2部分：充填孔拉伸和压缩试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 30968.1-2014 |
Test method for open-hole/loaded-hole of Polymer matrix composite laminates—Part 1: Test method of bearing response 聚合物基复合材料层合板开孔/受载孔性能试验方法 第1部分：挤压性能试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 7716-2014 |
Propylene for Polymerization―Specification 聚合级丙烯 |
China National Standards Polymer |
English PDF |
| GB/T 30925-2014 |
Plastics―Ethylene-vinyl acetate coPolymer(EVAC) thermoplastics―Determination of vinyl acetate content 塑料 乙烯-乙酸乙烯酯共聚物（EVAC）热塑性塑料 乙酸乙烯酯含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 30918-2014 |
Isoprene rubber(IR)―Non-oil-extended,solution-Polymerized typs―Evaluation procedure 非充油溶液聚合型异戊二烯橡胶(IR) 评价方法 |
China National Standards Polymer |
English PDF |
| GB/T 30778-2014 |
Polyvinyl acetate-acrylate mulsion adhesive for the laminating of paper/Polymer films at room temperature 聚醋酸乙烯-丙烯酸酯乳液纸塑冷贴复合胶 |
China National Standards Polymer |
English PDF |
| GB/T 30546-2014 |
Suitability of typical electrical insulating material (EIM) for Polymer recycling 典型电气绝缘材料（EIM）对聚合物回收的适用性 |
China National Standards Polymer |
English PDF |
| GB/T 30022-2013 |
Test method for basic mechanical properties of fiber reinforced Polymer bar 纤维增强复合材料筋基本力学性能试验方法 |
China National Standards Polymer |
English PDF |
| GB/T 29874-2013 |
Plastics - HomoPolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder 塑料 氯乙烯均聚和共聚树脂 气相色谱法对干粉中残留氯乙烯单体的测定 |
China National Standards Polymer |
English PDF |
| GB/T 29848-2013 |
Ethylene-vinyl acetate coPolymer(EVA) film for encapsulant solar module 光伏组件封装用乙烯-醋酸乙烯酯共聚物（EVA）胶膜 |
China National Standards Polymer |
English PDF |
| GB/T 29613.1-2013 |
Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 1：Identification of Polymers （single polymers and polymer blends） 橡胶 裂解气相色谱分析法 第1部分：聚合物（单一及并用）的鉴定 |
China National Standards Polymer |
English PDF |
| GB/T 29594-2013 |
Redispersible Polymer powder 可再分散性乳胶粉 |
China National Standards Polymer |
English PDF |
| GB/T 29493.6-2013 |
Determination of harmful substances in textile dyeing and finishing auxiliaries - Part 6: Determination of isocyanate groups in polyurethane prePolymers 纺织染整助剂中有害物质的测定 第6部分：聚氨酯预聚物中异氰酸酯基含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 29493.5-2013 |
Determination of harmful substances in textile dyeing and fininshing auxiliaries - Part 5: Determination of free formaldehyde in emulsion Polymers 纺织染整助剂中有害物质的测定 第5部分：乳液聚合物中游离甲醛含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 29324-2012 |
Fiber reinforced Polymer matrix composite core for overhead electrical conductors 架空导线用纤维增强树脂基复合材料芯棒 |
China National Standards Polymer |
English PDF |
| GB/T 29305-2012 |
Measurement of the average viscometric degree of Polymerization of new and aged cellulosic electrically insulating materials 新的和老化后的纤维素电气绝缘材料粘均聚合度的测量 |
China National Standards Polymer |
English PDF |
| GB/Z 28820.3-2012 |
Long-term radiation ageing in Polymers - Part 3: Procedures for in-service monitoring of low-voltage cable materials 聚合物长期辐射老化 第3部分：低压电缆材料在役监测程序 |
China National Standards Polymer |
English PDF |
| GB/Z 28820.2-2012 |
Long-term radiation ageing in Polymers - Part 2: Procedures for predicting ageing at low dose rates 聚合物长期辐射老化 第2部分：预测低剂量率下老化的程序 |
China National Standards Polymer |
English PDF |
| GB/Z 28820.1-2012 |
Long-term radiation ageing in Polymers - Part 1: Techniques for monitoring diffusion-limited oxidation 聚合物长期辐射老化 第1部分：监测扩散限制氧化的技术 |
China National Standards Polymer |
English PDF |
| GB/Z 28818-2012 |
Selection guide for Polymeric materials for outdoor use under HV stress 高电压下户外用聚合物材料的选用导则 |
China National Standards Polymer |
English PDF |
| GB/T 28817-2012 |
Single cell test methods for Polymer electrolyte fuel cell (PEFC) 聚合物电解质燃料电池单电池测试方法 |
China National Standards Polymer |
English PDF |
| GB 18173.1-2012 |
Polymer water-proof materials - Part 1：Water-proof sheet 高分子防水材料 第1部分：片材 |
China National Standards Polymer |
English PDF |
| GB/T 28728-2012 |
Determination of the microstructure of solution-Polymerized SBR 溶液聚合苯乙烯-丁二烯橡胶（SSBR）微观结构的测定 |
China National Standards Polymer |
English PDF |
| GB/T 27844-2011 |
Chemicals - Solution/extraction behaviour of Polymers in water 化学品 聚合物在水中的溶解/析出特性 |
China National Standards Polymer |
English PDF |
| GB/T 27843-2011 |
Chemicals - Determination of the low molecular weight content of a Polymer using Gel permeation chromatography（GPC） 化学品 聚合物低分子量组分含量测定 凝胶渗透色谱法（GPC） |
China National Standards Polymer |
English PDF |
| GB/T 27573-2011 |
Vinyl acetate-ethylene coPolymer emulsion 乙酸乙烯酯-乙烯共聚乳液 |
China National Standards Polymer |
English PDF |
| GB/T 27561-2011 |
Styrene-butadiene-styrene block coPolymers（SBS）adhesives 苯乙烯-丁二烯-苯乙烯嵌段共聚物（SBS）胶粘剂 |
China National Standards Polymer |
English PDF |
| GB/T 27531-2011 |
Protocol of reverse transcription Polymerase chain reaction(RT-PCR) for the pathogen of Viral encephalopathy and retinopathy 病毒性脑病和视网膜病病原逆转录-聚合酶链式反应（RT-PCR）检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 28032-2011 |
The coPolymer used to toner for electrostatic copier 静电成像墨粉用树脂 |
China National Standards Polymer |
English PDF |
| GB/T 26696-2011 |
Polymer board for furniture 家具用高分子材料台面板 |
China National Standards Polymer |
English PDF |
| GB/T 26636-2011 |
Animal and vegetable fats and oils - Determination of Polymerized triglycerides content by high-performance size-exclusion chromatography (HPSEC) 动植物油脂 聚合甘油三酯的测定 高效空间排阻色谱法(HPSEC) |
China National Standards Polymer |
English PDF |
| GB/T 26518-2011 |
Reinforced and composite Polymeric sheets for water proof 高分子增强复合防水片材 |
China National Standards Polymer |
English PDF |
| GB/T 12688.3-2011 |
Test method of styrene for industrial use - Part 3：Determination of content of Polymer 工业用苯乙烯试验方法 第3部分：聚合物含量的测定 |
China National Standards Polymer |
English PDF |
| GB/T 5559-2010 |
Non-ionic surface active agents obtained from ethylene oxide and ethylene oxide/propylene oxide block coPolymers - Determination of cloud point 环氧乙烷型及环氧乙烷-环氧丙烷嵌段聚合型非离子表面活性剂 浊点的测定 |
China National Standards Polymer |
English PDF |
| GB/T 26296-2010 |
Defects for anodic oxide coatings and organic Polymer coatings on aluminum and its alloys 铝及铝合金阳极氧化膜和有机聚合物涂层缺陷 |
China National Standards Polymer |
English PDF |
| GB/T 25878-2010 |
Polymerase chain reaction (PCR) method for infectious hypodermal and haematopoietic necrosis virus (IHHNV) 对虾传染性皮下及造血组织坏死病毒(IHHNV)检测 PCR法 |
China National Standards Polymer |
English PDF |
| GB/T 25440.3-2010 |
Retrieval and analysis of surgical implants - Part 3: Analysis of retrieved Polymeric surgical implants 外科植入物的取出与分析 第3部分：取出聚合物外科植入物的分析 |
China National Standards Polymer |
English PDF |
| GB 50639-2010 |
Code for design of polyamide Polymer and fiber plant 锦纶工厂设计规范 |
China National Standards Polymer |
English PDF |
| GB/T 25277-2010 |
Plastics - Determination of phenolic antioxidants and erucamide slip additives in polypropylene homoPolymer formulations - liquid chromatography (LC) 塑料 均聚聚丙烯（PP-H）中酚类抗氧剂和芥酸酰胺爽滑剂的测定 液相色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 1632.3-2010 |
Plastics - Determination of the viscosity of Polymers in dilute solution using capillary viscometer - part3: Polyethylenes and polypropylenes 塑料 使用毛细管黏度计测定聚合物稀溶液黏度 第3部分：聚乙烯和聚丙烯 |
China National Standards Polymer |
English PDF |
| GB/T 3402.2-2010 |
Plastics - HomoPolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties 塑料 氯乙烯均聚和共聚树脂 第2部分：试样制备及性能测定 |
China National Standards Polymer |
English PDF |
| GB/T 12010.5-2010 |
Plastic - polyvinyl alcohol (PVAL) materials - Part 5: Determination for average Polymerization degree 塑料 聚乙烯醇材料（PVAL） 第5部分：平均聚合度测定 |
China National Standards Polymer |
English PDF |
| GB 18173.4-2010 |
Polymer water-proof materials - Part 4: Rubber gasket for shield-driven tunnel 高分子防水材料 第4部分：盾构法隧道管片用橡胶密封垫 |
China National Standards Polymer |
English PDF |
| GB/T 24764-2009 |
Steel slag sand for Polymer modified mortar for external thermal insulation on outer-walls 外墙外保温抹面砂浆和粘结砂浆用钢渣砂 |
China National Standards Polymer |
English PDF |
| GB/T 2910.17-2009 |
Textiles - Quantitative chemical analysis - Part 17: Mixtures of chlorofibers (homoPolymers of vinyl chloride) and certain other fibers (method using sulfuric acid) 纺织品 定量化学分析 第17部分：含氯纤维（氯乙烯均聚物）与某些其他纤维的混合物（硫酸法） |
China National Standards Polymer |
English PDF |
| GB/T 23815-2009 |
Protocol of the Polymerase chain reaction for detecting plant components in meat 猪肉制品中植物成分定性PCR检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 23814-2009 |
Protocol of the Polymerase chain reaction for detecting kidney beans components in lotus foods 莲蓉制品中芸豆成分定性PCR检测方法 |
China National Standards Polymer |
English PDF |
| GB/T 23893-2009 |
Thermoplastic Polymers for plain bearings - Classification and designation 滑动轴承用热塑性聚合物 分类和标记 |
China National Standards Polymer |
English PDF |
| GB/T 23296.25-2009 |
Food contact materials - Polymer - Determination of 1,3-benzenedimethanamine in food simulants - High performance liquid chromatography 食品接触材料 高分子材料 食品模拟物中1，3-苯二甲胺的测定 高效液相色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 23296.24-2009 |
Food contact materials - Polymer - Determination of 1,2-dihydroxybenzene,1,3-dihydroxybenzene,1,4-dihydroxybenzene,4,4’-dihydroxybenzophenone and 4,4’dihydroxybiphenyl in food simulants - High performance liquid chromatography 食品接触材料 高分子材料 食品模拟物中1,2-苯二酚、1,3-苯二酚、1,4-苯二酚、4,4’-二羟二苯甲酮、4,4'-二羟联苯的测定 高效液相色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 23296.23-2009 |
Food contact materials - Polymer - Determination of 1,1,1-trimethylolpropane in food simulants - Gas chromatography 食品接触材料 高分子材料 食品模拟物中1,1,1-三甲醇丙烷的测定 气相色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 23296.9-2009 |
Food contact materials - Polymer - Determination of acrylamide in food simulants - High performance liquid chromatography 食品接触材料 高分子材料 食品模拟物中丙烯酰胺的测定 高效液相色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 23296.8-2009 |
Food contact materials - Polymer - Determination of acrylonitrile in food simulants - Gas chromatography 食品接触材料 高分子材料 食品模拟物中丙烯腈的测定 气相色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 23296.6-2009 |
Food contact materials - Polymer - Determination of 4-methyl-1-pentene in food simulants - Gas chromatography 食品接触材料 高分子材料 食品模拟物中4-甲基-1-戊烯的测定 气相色谱法 |
China National Standards Polymer |
English PDF |
| GB/T 23296.5-2009 |
Food contact materials - Polymer - Determination of dimethylaminoethanol in food simulants - Gas chromatography 食品接触材料 高分子材料 食品模拟物中2-(N,N-二甲基氨基)乙醇的测定 气相色谱法 |
China National Standards Polymer |
English PDF |
| Find out:286Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
