Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 10827.5-2023 |
Industrial vehicles - Safety requirements and verification - Part 5: Pedestrian vehicles {译} 工业车辆 安全要求和验证 第5部分：步行式车辆 |
China National Standards Requirement verification |
 English PDF |
| GB/T 32592-2023 |
Rail transit current receiving system Requirements and verification for dynamic interaction measurement between pantograph and catenary {译} 轨道交通 受流系统 受电弓与接触网动态相互作用测量的要求和验证 |
China National Standards Requirement verification |
English PDF |
| GB/T 30256-2023 |
Energy Savings Measurement and Verification Technical Requirements Motor System {译} 节能量测量和验证技术要求 电机系统 |
China National Standards Requirement verification |
English PDF |
| GB/T 10827.6-2023 |
Industrial vehicles - Safety requirements and verification - Part 6: Goods and personnel carriers {译} 工业车辆 安全要求和验证 第6部分：货物及人员载运车 |
China National Standards Requirement verification |
English PDF |
| GB/T 10827.4-2023 |
Industrial vehicles - Safety requirements and verification - Part 4: Unmanned industrial vehicles and their systems {译} 工业车辆 安全要求和验证 第4部分：无人驾驶工业车辆及其系统 |
China National Standards Requirement verification |
English PDF |
| GB/T 35205.6-2023 |
Rough terrain forklifts - Safety requirements and verification - Part 6: Inclined cab {译} 越野叉车 安全要求及验证 第6部分：倾斜式司机室 |
China National Standards Requirement verification |
English PDF |
| GB/T 35205.2-2023 |
Rough terrain forklifts - Safety requirements and verification - Part 2: Swivel forklifts {译} 越野叉车 安全要求及验证 第2部分：回转式叉车 |
China National Standards Requirement verification |
English PDF |
| GB/T 42157.1-2023 |
Rough terrain forklifts - Non-integrated personnel working platforms - Part 1: Design, safety requirements and verification {译} 越野叉车 非集成式人员工作平台 第1部分：设计、安全要求及验证 |
China National Standards Requirement verification |
English PDF |
| GB/T 10827.3-2022 |
Industrial vehicles - Safety requirements and verification - Part 3: Additional requirements for vehicles with lifted operating platforms and vehicles specially designed to operate with lifted loads {译} 工业车辆 安全要求和验证 第3部分：对带有起升操作台的车辆和专门设计为带起升载荷运行的车辆的附加要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 27029-2022 |
General principles and requirements for conformity assessment, validation and verification institutions {译} 合格评定 审定与核查机构通用原则和要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 39777-2021 |
Technical requirements of measurement and verification of energy savings—Industrial boiler system 节能量测量和验证技术要求 工业锅炉系统 |
China National Standards Requirement verification |
English PDF |
| GB/T 10827.2-2021 |
Industrial trucks -- Safety requirements and verification -- Part 2: Self-propelled variable-reach trucks 工业车辆? 安全要求和验证? 第2部分：自行式伸缩臂式叉车 |
China National Standards Requirement verification |
English PDF |
| GB/T 40742.3-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 3:Functional gauges and fixtures—Verification when applying maximum material requirements and minimum material requirements 产品几何技术规范（GPS） 几何精度的检测与验证 第3部分：功能量规与夹具 应用最大实体要求和最小实体要求时的检测与验证 |
China National Standards Requirement verification |
English PDF |
| GB/T 38563-2020 |
General technical requirements for anti-counterfeiting traceability verification based on mobile internet 基于移动互联网的防伪溯源验证通用技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 38325-2019 |
Ground-based verification requirements for space science experiments 空间科学实验地面验证要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 38314-2019 |
Lithium ion battery design and verification requirements for space application 宇航用锂离子蓄电池组设计与验证要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 38313-2019 |
Design and verification requirements of fibre optic components for space application 宇航用纤维光学器件设计与验证要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 38325-2019 |
Ground-based verification requirements for space science experiments 空间科学实验地面验证要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 38314-2019 |
Lithium ion battery design and verification requirements for space application 宇航用锂离子蓄电池组设计与验证要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 38313-2019 |
Design and verification requirements of fibre optic components for space application 宇航用纤维光学器件设计与验证要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 36629.3-2018 |
Information security technology—Security technique requirements for citizen cyber electronic identity—Part 3: Verification service message and processing rules 信息安全技术-公民网络电子身份标识安全技术要求-第3部分：验证服务消息及其处理规则 |
China National Standards Requirement verification |
English PDF |
| GB/T 37016-2018 |
Technical requirements of measurement and verification about power saving in demand response for power users 电力用户需求响应节约电力测量与验证技术要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 35205.1-2017 |
Rough-terrain trucks－Safety requirements and verification－Part 1:Variable-reach trucks 越野叉车 安全要求及验证 第1部分：伸缩臂式叉车 |
China National Standards Requirement verification |
English PDF |
| GB/T 35285-2017 |
Information security technology—Public key infrastructure—Technical requirements for digital certificate based reliable electronic signature creation and verification 信息安全技术 公钥基础设施 基于数字证书的可靠电子签名生成及验证技术要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 32666.3-2016 |
High grade and popular numerical control systems of machine tool—Part 3: Requirements and verification specifications for A.C. servo device 高档与普及型机床数控系统 第3部分：交流伺服驱动装置的要求及验收规范 |
China National Standards Requirement verification |
English PDF |
| GB/T 32666.2-2016 |
High grade and popular numerical control system of machine tool—Part 2: Requirements and verification specifications for spindle drive device 高档与普及型机床数控系统 第2部分：主轴驱动装置的要求及验收规范 |
China National Standards Requirement verification |
English PDF |
| GB/T 32666.1-2016 |
High-grade and popular numerical control system of machine tool—Part 1: Requirements and verification specifications for numerical control device 高档与普及型机床数控系统 第1部分: 数控装置的要求及验收规范 |
China National Standards Requirement verification |
English PDF |
| GB/T 32465-2015 |
Requirement for verification & validation of detection methods and internal quality control on chemical analysis 化学分析方法验证确认和内部质量控制要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 31349-2014 |
Technical requirements of measurement and verification of energy savings—Central air-conditioning system 节能量测量和验证技术要求 中央空调系统 |
China National Standards Requirement verification |
English PDF |
| GB/T 31348-2014 |
Technical requirements of measurement and verification of energy savings—Lighting system 节能量测量和验证技术要求 照明系统 |
China National Standards Requirement verification |
English PDF |
| GB/T 31347-2014 |
Technical requirements of measurement and verification of energy savings—Communication room project 节能量测量和验证技术要求 通信机房项目 |
China National Standards Requirement verification |
English PDF |
| GB/T 31346-2014 |
Technical requirements of measurement and verification of energy savings—Waste heat power generation project in cement production 节能量测量和验证技术要求 水泥余热发电项目 |
China National Standards Requirement verification |
English PDF |
| GB/T 31345-2014 |
Technical requirements of measurement and verification of energy savings, heating system project for residential building 节能量测量和验证技术要求 居住建筑供暖项目 |
China National Standards Requirement verification |
English PDF |
| GB/T 31344-2014 |
Technical requirements of measurement and verification of energy savings—Slab reheating furnace system 节能量测量和验证技术要求 板坯加热炉系统 |
China National Standards Requirement verification |
English PDF |
| GB/Z 30993-2014 |
Safety requirements for electrical equipment for measurement, control, and laboratory use―Conformity verification report for GB 4793.1-2007 测量、控制和实验室用电气设备的安全要求 GB 4793.1-2007的符合性验证报告格式 |
China National Standards Requirement verification |
English PDF |
| GB/T 30992-2014 |
Conformity verification protocol for safety requirements for industrial automation products―General rule 工业自动化产品安全要求符合性验证规程 总则 |
China National Standards Requirement verification |
English PDF |
| GB 10827.1-2014 |
Industrial trucks――Safety requirements and verification―Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks 工业车辆 安全要求和验证 第1部分：自行式工业车辆（除无人驾驶车辆、伸缩臂式叉车和载运车） |
China National Standards Requirement verification |
English PDF |
| GB/T 10827.1-2014 |
Industrial trucks—Safety requirements and verification—Part 1:Self-propelled industrial trucks, other than driverless trucks,variable-reach trucks and burden-carrier trucks 工业车辆 安全要求和验证 第1部分：自行式工业车辆（除无人驾驶车辆、伸缩臂式叉车和载运车） |
China National Standards Requirement verification |
English PDF |
| GB 10827.5-2013 |
Industrial trucks―Safety requirements and verification―Part 5: Pedestrian-propelled trucks 工业车辆 安全要求和验证 第5部分：步行式车辆 |
China National Standards Requirement verification |
English PDF |
| GB/T 30257-2013 |
Technical requirements of measurement and verification of energy savings, fan system 节能量测量和验证技术要求 通风机系统 |
China National Standards Requirement verification |
English PDF |
| GB/T 30256-2013 |
Technical requirements of measurement and verification of energy savings,pumped liquid delivery system 节能量测量和验证技术要求 泵类液体输送系统 |
China National Standards Requirement verification |
English PDF |
| GB/T 28550-2012 |
Piping verification requirement during nuclear power plant commissioning 核电厂调试阶段管道验证要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 28549-2012 |
Verification requirement of supports in nuclear island during nuclear power plant commissioning 核电厂调试阶段核岛管道与主设备支吊装置验证要求 |
China National Standards Requirement verification |
English PDF |
| GB/T 9239.1-2006 |
Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances 机械振动 恒态（刚性）转子平衡品质要求 第1部分：规范与平衡允差的检验 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.9-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 9:Technical requirements of verification for platform brake tester 机动车安全检测设备 检定技术条件 第9部分:平板制动试验台检定技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.8-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 8:Technical requirements of verification of motorcycle wheel deviation tester 机动车安全检测设备 检定技术条件 第8部分:摩托车轮偏检测仪检定技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.7-2001 |
Motorvehicle safety testing equipment--Technical requirements of verification--Part 7:Technical requirements of verification for Axle(Wheel) load scales 机动车安全检测设备 检定技术条件 第7部分:轴(轮)重仪检定技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.6-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 6:Technical requirements of verification for symmetrical beam headlamp tester 机动车安全检测设备 检定技术条件 第6部分:对称光前照灯检测仪检定技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.5-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 5:Technical requirements of verification for filter type smokemeter 机动车安全检测设备 检定技术条件 第5部分:滤纸式烟度计检定技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.4-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 4:Technical requirements of verification for speedometer tester of roller type 机动车安全检测设备 检定技术条件 第4部分:滚筒式车速表试验台检定技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.3-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 3:Technical requirements of verification for gasoline motor vehicle emission analyzer 机动车安全检测设备 检定技术条件 第3部分:汽油车排气分析仪检定技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.2-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 2:Technical requirements of verification for opposite force roller brake tester 机动车安全检测设备 检定技术条件 第2部分:滚筒反力式制动试验台检定技术条件 |
China National Standards Requirement verification |
English PDF |
| GB/T 11798.1-2001 |
Motor vehicle safety testing equipment--Technical requirements of verification--Part 1:Technical requirements of verification for side slip tester of slipper type 机动车安全检测设备 检定技术条件 第1部分:滑板式汽车侧滑试验台检定技术条件 |
China National Standards Requirement verification |
English PDF |
| Find out:53Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
