Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44148.3-2024 |
Steel forgings, Rolled or forged steel bars for pressure equipment-Part 3: Low temperature toughness nickel steel {译} 承压设备用钢锻件、轧制或锻制钢棒-第3部分:低温韧性镍钢 |
China National Standards Rolled |
 English PDF |
| GB/T 44148.2-2024 |
Steel forgings, Rolled or forged steel bars for pressure equipment-Part 2: Low alloy and alloy (molybdenum, chromium and chromium-molybdenum) steels with specified high temperature properties {译} 承压设备用钢锻件、轧制或锻制钢棒-第2部分：规定高温性能的低合金及合金（钼、铬和铬钼）钢 |
China National Standards Rolled |
English PDF |
| GB/T 44148.1-2024 |
Steel forgings, Rolled or forged steel bars for pressure equipment-Part 1: General requirements {译} 承压设备用钢锻件、轧制或锻制钢棒-第1部分：一般要求 |
China National Standards Rolled |
English PDF |
| GB-13788-2024 |
Cold-Rolled ribbed steel bars {译} 冷轧带肋钢筋 |
China National Standards Rolled |
English PDF |
| GB-1499.2-2024 |
Steel for reinforced concrete-Part 2: Hot-Rolled ribbed steel bars {译} 钢筋混凝土用钢-第2部分：热轧带肋钢筋 |
China National Standards Rolled |
English PDF |
| GB-1499.1-2024 |
Steel for reinforced concrete-Part 1: Hot-Rolled plain round steel bars {译} 钢筋混凝土用钢-第1部分：热轧光圆钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 44051-2024 |
Non-destructive testing of welds-Phase-contRolled array ultrasonic testing of thin-walled steel components-Acceptance levels {译} 焊缝无损检测-薄壁钢构件相控阵超声检测-验收等级 |
China National Standards Rolled |
English PDF |
| GB/T 12668.7202-2024 |
Speed-contRolled electric drive systems - Part 7-202: General interface and use specifications for electric drive systems - Type 2 specification description {译} 调速电气传动系统-第7-202部分：电气传动系统的通用接口和使用规范-2型规范说明 |
China National Standards Rolled |
English PDF |
| GB/T 32285-2024 |
Hot-Rolled H-beam piles {译} 热轧H型钢桩 |
China National Standards Rolled |
English PDF |
| GB/T 43893-2024 |
Hot-Rolled steel for prefabricated steel structure buildings {译} 装配式钢结构建筑用热轧型钢 |
China National Standards Rolled |
English PDF |
| GB/T 43947-2024 |
General technical requirements for low-speed wire-contRolled chassis {译} 低速线控底盘通用技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 36306-2024 |
Clean rooms and related contRolled environments - Technical requirements for control of chemical pollution in air {译} 洁净室及相关受控环境-空气化学污染控制技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 43657.2-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 2: Self-propelled vehicles, tractors and carriers contRolled by operators {译} 工业车辆能效-试验方法-第2部分：操作者控制的自行式车辆、牵引车和载运车 |
China National Standards Rolled |
English PDF |
| GB/T 25915.16-2024 |
Clean rooms and related contRolled environments-Part 16: Improving the energy efficiency of clean rooms and air purification devices {译} 洁净室及相关受控环境-第16部分：提升洁净室和空气净化装置的能效 |
China National Standards Rolled |
English PDF |
| GB/T 43685-2024 |
General technical requirements for inflatable membrane structure cabins and contRolled environments {译} 充气膜结构舱室及受控环境通用技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 25915.3-2024 |
Clean rooms and related contRolled environments-Part 3: Detection methods {译} 洁净室及相关受控环境-第3部分：检测方法 |
China National Standards Rolled |
English PDF |
| GB/T 43727-2024 |
Thyristor valves for thyristor contRolled series capacitors (TCSC)-Electrical test {译} 晶闸管控制串联电容器（TCSC）用晶闸管阀-电气试验 |
China National Standards Rolled |
English PDF |
| GB/T 43665-2024 |
Hot-Rolled rare earth steel bars for reinforced concrete {译} 钢筋混凝土用热轧稀土钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 43619-2023 |
Overpressure protection safety device ContRolled safety pressure relief system {译} 超压保护安全装置 受控安全泄压系统 |
China National Standards Rolled |
English PDF |
| GB/T 43459-2023 |
Technical specifications for cell culture operations in clean rooms and contRolled environments {译} 洁净室及受控环境中细胞培养操作技术规范 |
China National Standards Rolled |
English PDF |
| GB/T 3195-2023 |
Aluminum and aluminum alloy drawn (Rolled) round wire rods {译} 铝及铝合金拉（轧）制圆线材 |
China National Standards Rolled |
English PDF |
| GB/T 3279-2023 |
Spring steel hot Rolled steel plates and strips {译} 弹簧钢热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 3278-2023 |
Hot Rolled steel plates and strips for tools {译} 工具用热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 25368-2023 |
Diesel engine electronically contRolled common rail system high-pressure fuel supply pump assembly {译} 柴油机电控共轨系统 高压供油泵总成 |
China National Standards Rolled |
English PDF |
| GB/T 42678-2023 |
Hot Rolled steel for oil and gas engineering {译} 石油天然气工程用热轧型钢 |
China National Standards Rolled |
English PDF |
| GB/T 34215-2023 |
Cold-Rolled non-oriented electrical steel strip (sheet) for electric vehicle drive motor {译} 电动汽车驱动电机用冷轧无取向电工钢带（片） |
China National Standards Rolled |
English PDF |
| GB/T 20564.14-2023 |
High-strength cold-Rolled steel plates and strips for automobiles Part 14: Low-density steel {译} 汽车用高强度冷连轧钢板及钢带 第14部分：低密度钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.13-2023 |
High-strength cold-Rolled steel plates and strips for automobiles Part 13: Medium manganese steel {译} 汽车用高强度冷连轧钢板及钢带 第13部分：中锰钢 |
China National Standards Rolled |
English PDF |
| GB/T 42826-2023 |
Radio contRolled clock signal reception test method {译} 电波钟 信号接收测试方法 |
China National Standards Rolled |
English PDF |
| GB/T 2523-2022 |
Method for measuring surface roughness, peak number and waviness of cold-Rolled metal sheet and strip {译} 冷轧金属薄板和薄带表面粗糙度、峰值数和波纹度测量方法 |
China National Standards Rolled |
English PDF |
| GB/T 20564.6-2022 |
High-strength cold-Rolled steel sheets and strips for automobiles—Part 6: Transformation-induced plasticity steels {译} 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.5-2022 |
High-strength cold-Rolled steel sheets and strips for automobiles - Part 5: Isotropic steels {译} 汽车用高强度冷连轧钢板及钢带 第5部分：各向同性钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.4-2022 |
High-strength cold-Rolled steel sheets and strips for automobiles - Part 4: Low-alloy high-strength steels {译} 汽车用高强度冷连轧钢板及钢带 第4部分：低合金高强度钢 |
China National Standards Rolled |
English PDF |
| GB/T 41408-2022 |
Sensory analysis methodology - General guidelines for testing consumer preferences in contRolled areas {译} 感官分析 方法学 受控区域消费者喜好测试一般导则 |
China National Standards Rolled |
English PDF |
| GB/T 20887.5-2022 |
High strength hot Rolled steel sheet and strip for automobile part 5: martensitic steel {译} 汽车用高强度热连轧钢板及钢带 第5部分:马氏体钢 |
China National Standards Rolled |
English PDF |
| GB/T 20887.4-2022 |
High strength hot Rolled steel sheet and strip for automobile part 4: transformation induced plastic steel {译} 汽车用高强度热连轧钢板及钢带 第4部分:相变诱导塑性钢 |
China National Standards Rolled |
English PDF |
| GB/T 20887.3-2022 |
High strength hot Rolled steel sheet and strip for automobile part 3: dual phase steel {译} 汽车用高强度热连轧钢板及钢带 第3部分：双相钢 |
China National Standards Rolled |
English PDF |
| GB/T 20887.2-2022 |
High strength hot Rolled steel sheet and strip for automobile part 2: high reaming steel {译} 汽车用高强度热连轧钢板及钢带 第2部分：高扩孔钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.7-2022 |
High strength tandem cold Rolled steel sheet and strip for automobile part 7: martensitic steel {译} 汽车用高强度冷连轧钢板及钢带 第7部分：马氏体钢 |
China National Standards Rolled |
English PDF |
| GB/T 4162-2022 |
Ultrasonic testing method for forged and Rolled steel bars {译} 锻轧钢棒超声检测方法 |
China National Standards Rolled |
English PDF |
| GB/T 6893-2022 |
Aluminium and aluminium alloys cold drawn (Rolled) tubes 铝及铝合金拉（轧）制管材 |
China National Standards Rolled |
English PDF |
| GB/T 25915.15-2022 |
Clean rooms and related contRolled environments - Part 15: Suitability assessment of equipment and materials by concentration of gaseous chemicals {译} 洁净室及相关受控环境 第15部分： 按气态化学物浓度评定设备及材料的适用性 |
China National Standards Rolled |
English PDF |
| GB/T 25915.14-2022 |
Clean rooms and related contRolled environments - Part 14: Assessment of equipment suitability by particle concentration {译} 洁净室及相关受控环境 第14部分：按粒子浓度评估设备适用性 |
China National Standards Rolled |
English PDF |
| GB/T 25915.13-2022 |
Cleanrooms and related contRolled environments - Part 13: Surface cleaning to particle and chemical cleanliness requirements {译} 洁净室及相关受控环境 第13部分：达到粒子和化学洁净度要求的表面清洁 |
China National Standards Rolled |
English PDF |
| GB/T 42125.19-2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically contRolled valves {译} 测量、控制和实验室用电气设备的安全要求 第19部分：电动控制阀门执行器的特殊要求 |
China National Standards Rolled |
English PDF |
| GB/T 41763-2022 |
Dimensions, shapes, weights and allowable deviations of twin-roll cast-Rolled hot-rolled steel sheets and strips {译} 双辊铸轧热轧薄钢板及钢带的尺寸、外形、重量及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 17396-2022 |
Hot-Rolled seamless steel pipes for hydraulic props {译} 液压支柱用热轧无缝钢管 |
China National Standards Rolled |
English PDF |
| GB/T 41747-2022 |
Structural-grade and high-strength continuous hot-dip galvanized twin-roll cast-Rolled steel sheet and strip {译} 结构级和高强度连续热镀锌双辊铸轧薄钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 41746-2022 |
Commercial-grade continuous hot-dip galvanized twin-roll cast-Rolled steel sheet and strip {译} 商品级连续热镀锌双辊铸轧薄钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 41749-2022 |
General requirements for surface quality of hot-Rolled section steel {译} 热轧型钢表面质量一般要求 |
China National Standards Rolled |
English PDF |
| GB/T 40383-2021 |
Hot-Rolled twin-roll cast carbon steel sheet and strip of commercial quality 商品级双辊铸轧热轧碳素钢薄钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 40410-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-contRolled method 金属材料 多轴疲劳试验 轴向-扭转应变控制方法 |
China National Standards Rolled |
English PDF |
| GB/T 40282-2021 |
Hot-Rolled twin roll cast steel sheets and strips of structural quality and high strength steel 结构级和高强度双辊铸轧热轧薄钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 25915.8-2021 |
Cleanrooms and associated contRolled environments—Part 8: Classification of air cleanliness by chemical concentration (ACC) 洁净室及相关受控环境 第8部分：按化学物浓度划分空气洁净度(ACC)等级 |
China National Standards Rolled |
English PDF |
| GB/T 25915.2-2021 |
Cleanrooms and associated contRolled environments—Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration 洁净室及相关受控环境 第2部分：洁净室空气粒子浓度的监测 |
China National Standards Rolled |
English PDF |
| GB/T 25915.1-2021 |
Cleanrooms and associated contRolled environments—Part 1: Classification of air cleanliness by particle concentration 洁净室及相关受控环境 第1部分：按粒子浓度划分空气洁净度等级 |
China National Standards Rolled |
English PDF |
| GB/T 25915.10-2021 |
Cleanrooms and associated contRolled environments—Part 10: Classification of surface cleanliness by chemical concentration 洁净室及相关受控环境 第10部分：按化学物浓度划分表面洁净度等级 |
China National Standards Rolled |
English PDF |
| GB/T 8749-2021 |
Hot-Rolled quality carbon structural steel strip 优质碳素结构钢热轧钢带 |
China National Standards Rolled |
English PDF |
| GB/T 3639-2021 |
Seamless cold-drawn or cold-Rolled steel tubes for precision applications 冷拔或冷轧精密无缝钢管 |
China National Standards Rolled |
English PDF |
| GB/T 3075-2021 |
Metallic materials—Fatigue testing—Axial force-contRolled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards Rolled |
English PDF |
| GB/T 26077-2021 |
Metallic materials—Fatigue testing—Axial-strain-contRolled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards Rolled |
English PDF |
| GB/T 39856-2021 |
Hot Rolled titanium and titanium alloy seamless tubes 热轧钛及钛合金无缝管材 |
China National Standards Rolled |
English PDF |
| GB/T 17421.10-2021 |
Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically contRolled machine tools 机床检验通则 第10部分：数控机床探测系统测量性能的测定 |
China National Standards Rolled |
English PDF |
| GB/T 2585-2021 |
Hot-Rolled steel rails for railway 铁路用热轧钢轨 |
China National Standards Rolled |
English PDF |
| GB/T 41154-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-contRolled thermo-mechanical fatigue testing method 金属材料 多轴疲劳试验 轴向-扭转应变控制热机械疲劳试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 3836.32-2021 |
Explosive atmospheres—Part 32:Intrinsically safe systems with electronically contRolled spark duration limitation 爆炸性环境 第32部分：电子控制火花时限本质安全系统 |
China National Standards Rolled |
English PDF |
| GB/T 12274.4-2021 |
Quartz crystal contRolled oscillators of assessed quality—Part 4: Sectional specification—Capability approval 有质量评定的石英晶体振荡器 第4部分:分规范 能力批准 |
China National Standards Rolled |
English PDF |
| GB/T 40868-2021 |
Planning and design of contRolled environments for research and production at the nanometer scale 纳米尺度科研生产受控环境规划与设计 |
China National Standards Rolled |
English PDF |
| GB/T 25915.12-2021 |
Cleanrooms and associated contRolled environments—Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration 洁净室及相关受控环境 第12部分：监测空气中纳米粒子浓度的技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 8601-2021 |
Forged and Rolled solid wheels for railway 铁路用辗钢整体车轮 |
China National Standards Rolled |
English PDF |
| GB/T 20933-2021 |
Hot Rolled sheet pile 热轧钢板桩 |
China National Standards Rolled |
English PDF |
| GB/T 39521-2020 |
Tractors and machinery for agriculture—Auto-guidance systems for operator-contRolled tractors and self-propelled machines—Safety requirements 农业拖拉机和机械 拖拉机和自走式机械的自动导航系统 安全要求 |
China National Standards Rolled |
English PDF |
| GB/T 22869-2020 |
Interleaving paper for cold Rolled metal sheets 冷轧金属板衬纸 |
China National Standards Rolled |
English PDF |
| GB/T 38960-2020 |
Cryogenic-resistant contRolled expansion alloys 耐低温定膨胀合金 |
China National Standards Rolled |
English PDF |
| GB/T 38933-2020 |
Cold Rolled steel sheet for automobile—Test method of phosphate conversion coatings 汽车用冷轧钢板 磷酸盐转化膜试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 38813-2020 |
General requirements for hot-Rolled pickled steel sheet and strip 热轧酸洗钢板及钢带的一般要求 |
China National Standards Rolled |
English PDF |
| GB/T 38749-2020 |
Technical requirements of contRolled atmosphere heat treatment 可控气氛热处理技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 38737-2020 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in contRolled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 |
China National Standards Rolled |
English PDF |
| GB/T 38690-2020 |
Corrosion-resistant alloy hot-Rolled sheets and strips 耐蚀合金热轧薄板及带材 |
China National Standards Rolled |
English PDF |
| GB/T 38689-2020 |
Corrosion-resistant alloy cold-Rolled sheets and strips 耐蚀合金冷轧薄板及带材 |
China National Standards Rolled |
English PDF |
| GB/T 38688-2020 |
Corrosion-resistant alloy of hot Rolled plates 耐蚀合金热轧厚板 |
China National Standards Rolled |
English PDF |
| GB/T 24595-2020 |
Hot-Rolled steel bars for quenched and tempered automobile crankshafts 汽车调质曲轴用热轧钢棒 |
China National Standards Rolled |
English PDF |
| GB 9706.217-2020 |
Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-contRolled brachytherapy afterloading equipment 医用电气设备 第2-17部分：自动控制式近距离治疗后装设备的基本安全和基本性能专用要求 |
China National Standards Rolled |
English PDF |
| GB/T 38347-2019 |
Hot-Rolled wire rod of ultra-low carbon steel with high boron 超低碳高硼钢热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 38364.2-2019 |
Garden equipment—Safety requirements for combustion-engine-powered lawnmowers—Part 2:Pedestrian-contRolled lawnmowers 园林机械 以内燃机为动力的草坪修剪机安全要求 第2部分：步进式草坪修剪机 |
China National Standards Rolled |
English PDF |
| GB/T 38347-2019 |
Hot-Rolled wire rod of ultra-low carbon steel with high boron 超低碳高硼钢热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 37892-2019 |
Digital integrated full frequency conversion contRolled constant pressure water supply equipment 数字集成全变频控制恒压供水设备 |
China National Standards Rolled |
English PDF |
| GB/T 37800-2019 |
Hot Rolled longitudinally profiled steel plate 热轧纵向变厚度钢板 |
China National Standards Rolled |
English PDF |
| GB/T 37622-2019 |
Hot Rolled steel bar of fire resistant for the reinforcement of concrete 钢筋混凝土用热轧耐火钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 37616-2019 |
Aluminium alloys extruded profiles-axial force contRolled fatigue testing method 铝合金挤压型材轴向力控制疲劳试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 37601-2019 |
Hot Rolled steel sheet and strip of alloy structure steel 合金结构钢热连轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 37593-2019 |
Cold-Rolled grain-oriented electrical steel strip specialized for UHV transformers 特高压变压器用冷轧取向电工钢带 |
China National Standards Rolled |
English PDF |
| GB/T 37591-2019 |
Cold-Rolled non-grain oriented electrical steel strip specialized for large generators with power of 700MW or higher 700MW及以上级大电机用冷轧无取向电工钢带 |
China National Standards Rolled |
English PDF |
| GB/T 37501-2019 |
Brass wires for unidirectional travelling wire electrical-discharge machining in numerically contRolled machines 数控机床用单向走丝电火花加工用黄铜线 |
China National Standards Rolled |
English PDF |
| GB/T 25832-2019 |
Hot Rolled steel plate and strip for porcelain enameling 搪瓷用热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 20564.12-2019 |
Continuously cold Rolled high strength steel sheet and strip for automobile—Part 12:Dual phase steel with high formability 汽车用高强度冷连轧钢板及钢带 第12部分：增强成形性双相钢 |
China National Standards Rolled |
English PDF |
| GB/T 5213-2019 |
Cold Rolled low carbon steel sheet and strip 冷轧低碳钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 709-2019 |
Dimension,shape,weight and tolerance for hot-Rolled steel strip,plate and sheet 热轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 708-2019 |
Dimension,shape,weight and tolerance for cold-Rolled steel strip and sheet 冷轧钢板和钢带的尺寸、外形、重量及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 4059-2018 |
Test method for phosphorus content in polycrystalline silicon by zone-melting method under contRolled atmosphere 硅多晶气氛区熔基磷检验方法 |
China National Standards Rolled |
English PDF |
| GB/T 36130-2018 |
Hot Rolled steel plate，sheet and strip for tower structural purpose 铁塔结构用热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 36146-2018 |
Rolled Copper foil for lithium ion battery 锂离子电池用压延铜箔 |
China National Standards Rolled |
English PDF |
| GB/T 25915.9-2018 |
Cleanrooms and associated contRolled environments—Part 9: Classification of surface cleanliness by particle concentration 洁净室及相关受控环境 第9部分：按粒子浓度划分表面洁净度等级 |
China National Standards Rolled |
English PDF |
| GB/T 23567.3-2018 |
Reliability evaluation for numerical control machine tools—Part 3: Numerically contRolled turning machines and turning centres 数控机床可靠性评定 第3部分：数控车床与车削中心 |
China National Standards Rolled |
English PDF |
| GB/T 36527-2018 |
Cleanroom and associated contRolled environments—Guideline of energy saving 洁净室及相关受控环境 节能指南 |
China National Standards Rolled |
English PDF |
| GB/T 36306-2018 |
Cleanrooms and associated contRolled environments—Guidelines for airborne chemical contamination control 洁净室及相关受控环境 空气化学污染控制指南 |
China National Standards Rolled |
English PDF |
| GB/T 36370-2018 |
Cleanroom and associated contRolled environments—Guidelines of application of air filters 洁净室及相关受控环境 空气过滤器应用指南 |
China National Standards Rolled |
English PDF |
| GB/T 36372-2018 |
Cleanrooms and associated contRolled environments—General technical requirements of combined envelope structure 洁净室及相关受控环境 组合式围护结构通用技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 36707-2018 |
Hot Rolled carbon steel and stainless steel clad bars for the reinforcement of concrete 钢筋混凝土用热轧碳素钢-不锈钢复合钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 36066-2018 |
Cleanrooms and associated contRolled environments—Analysis and application of test technology 洁净室及相关受控环境 检测技术分析与应用 |
China National Standards Rolled |
English PDF |
| GB/T 1499.2-2018 |
Steel for the reinforcement of concrete—Part 2:Hot Rolled ribbed bars 钢筋混凝土用钢 第2部分：热轧带肋钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 35011-2018 |
Microwave circuits—Measuring methods for voltage contRolled oscillater 微波电路 压控振荡器测试方法 |
China National Standards Rolled |
English PDF |
| GB/T 34560.1-2017 |
Structural steels—Part 1: General technical delivery condition for hot-Rolled products 结构钢 第1部分：热轧产品一般交货技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 34480-2017 |
Aluminum alloys die forgings, hand forgings, and Rolled ring forgings from spray-formed billet 喷射成形锭坯锻制的铝合金锻件 |
China National Standards Rolled |
English PDF |
| GB/T 34358-2017 |
Dimension measurement of hot free forgings and Rolled rings 自由锻件、辗轧环件热态尺寸测量 |
China National Standards Rolled |
English PDF |
| GB/T 4857.15-2017 |
Packaging—Basic tests for transport packages—Part 15：ContRolled horizontal impact test method 包装 运输包装件基本试验 第15部分：可控水平冲击试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 702-2017 |
Hot-Rolled steel bars—Dimensions,shape,weight and tolerances 热轧钢棒尺寸、外形、重量及允许偏差 |
China National Standards Rolled |
English PDF |
| GB/T 20564.1-2017 |
Continuously cold Rolled high strength steel sheet and strip for automobile—Part 1: Bake hardening steel 汽车用高强度冷连轧钢板及钢带 第1部分：烘烤硬化钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.3-2017 |
Continuously cold Rolled high strength steel sheet and strip for automobile—Part 3: High strength interstitial free steel 汽车用高强度冷连轧钢板及钢带 第3部分: 高强度无间隙原子钢 |
China National Standards Rolled |
English PDF |
| GB/T 34199-2017 |
Hot-Rolled H section steel for electrified railway pillars 电气化铁路接触网支柱用热轧H型钢 |
China National Standards Rolled |
English PDF |
| GB/T 20887.7-2017 |
Continuously hot Rolled high strength steel sheet and strip for automobile—Part 7：Steels for hydraulic forming 汽车用高强度热连轧钢板及钢带 第7部分：液压成形用钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.11-2017 |
Continuously cold Rolled high strength steel sheet and strip for automobile—Part 11：Carbon manganese steel 汽车用高强度冷连轧钢板及钢带 第11部分：碳锰钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.2-2017 |
Continuously cold Rolled high strength steel sheet and strip for automobile—Part 2: Dual phase steel 汽车用高强度冷连轧钢板及钢带 第2部分：双相钢 |
China National Standards Rolled |
English PDF |
| GB/T 20887.6-2017 |
Continuously hot Rolled high strength steel sheet and strip for automobile—Part 6: Complex phase steel 汽车用高强度热连轧钢板及钢带 第6部分：复相钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.10-2017 |
Continuously cold Rolled high strength steel sheet and strip for automobile—Part 10: Twinning induced plasticity steel 汽车用高强度冷连轧钢板及钢带 第10部分：孪晶诱导塑性钢 |
China National Standards Rolled |
English PDF |
| GB/T 34201-2017 |
Seamless hot-Rolled square and rectangular steel tubes for structure 结构用方形和矩形热轧无缝钢管 |
China National Standards Rolled |
English PDF |
| GB/T 20887.1-2017 |
Continuously hot Rolled high strength steel sheet and strip for automobile—Part 1: High yield strength steel for cold forming 汽车用高强度热连轧钢板及钢带 第1部分：冷成形用高屈服强度钢 |
China National Standards Rolled |
English PDF |
| GB/T 34200-2017 |
Cold Rolled stainless steel plate,sheet and strip for construction roof and curtain 建筑屋面和幕墙用冷轧不锈钢钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 34212-2017 |
Cold Rolled steel strip for battery shell 电池壳用冷轧钢带 |
China National Standards Rolled |
English PDF |
| GB/T 34215-2017 |
Cold-Rolled non-oriented electrical steel strip（sheet）for electric vehicle driving motor 电动汽车驱动电机用冷轧无取向电工钢带（片） |
China National Standards Rolled |
English PDF |
| GB/T 34103-2017 |
Hot Rolled H section steel for ocean engineering structure 海洋工程结构用热轧H型钢 |
China National Standards Rolled |
English PDF |
| GB/T 34096-2017 |
Mobile payment—Test methods for contactless reader terminal based on 2.45GHz range contRolled communication technology 手机支付 基于2.45GHz RCC（限域通信）技术的非接触式读写器终端测试方法 |
China National Standards Rolled |
English PDF |
| GB/T 33968-2017 |
Hot Rolled steel sections with improved weldability 改善焊接性能热轧型钢 |
China National Standards Rolled |
English PDF |
| GB/T 33972-2017 |
Hot Rolled steel sheet and strip for bogie frame of high-speed train 高速列车转向架构架用热轧钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 33976-2017 |
Corrosion resistant hot Rolled section steel for cargo oil tanks 原油船货油舱用耐腐蚀热轧型钢 |
China National Standards Rolled |
English PDF |
| GB/T 33971-2017 |
Hot Rolled wide strips for coal slurry line pipe 煤浆输送管用热轧宽钢带 |
China National Standards Rolled |
English PDF |
| GB/T 33975-2017 |
Hot-Rolled spring steel wire rod for high-speed railway fastener 高速铁路扣件用弹簧钢热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 4697-2017 |
Hot Rolled steel section for mine timbering 矿山巷道支护用热轧型钢 |
China National Standards Rolled |
English PDF |
| GB/T 13788-2017 |
Cold Rolled ribbed steel bars 冷轧带肋钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 33954-2017 |
Hot-Rolled wire rod for quenched and tempered spring steel wires 淬火-回火弹簧钢丝用热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 16462.3-2017 |
Test conditions for numerically contRolled turning machines and turning centres—Part 3: Geometric tests for machines with inverted vertical work-holding spindles 数控车床和车削中心检验条件 第3部分：倒置立式机床几何精度检验 |
China National Standards Rolled |
English PDF |
| GB/T 16462.2-2017 |
Test conditions for numerically contRolled turning machines and turning centers—Part 2: Geometric tests for machines with a vertical workholding spindle 数控车床和车削中心检验条件 第2部分：立式机床几何精度检验 |
China National Standards Rolled |
English PDF |
| GB/T 16462.5-2017 |
Test conditions for numerically contRolled turning machines and turning centers—Part 5: Accuracy of feeds, speeds and interpolations 数控车床和车削中心检验条件 第5部分：进给率、速度和插补精度检验 |
China National Standards Rolled |
English PDF |
| GB/T 16462.6-2017 |
Test conditions for numerically contRolled turning machines and turning centers—Part 6: Accuracy of a finished test piece 数控车床和车削中心检验条件 第6部分：精加工试件精度检验 |
China National Standards Rolled |
English PDF |
| GB/T 24238-2017 |
Hot-Rolled wire rod for prestressed steel wire and strand 预应力钢丝及钢绞线用热轧盘条 |
China National Standards Rolled |
English PDF |
| GB/T 33812-2017 |
Metallic material—Fatigue testing—Strain-contRolled thermomechanical fatigue testing method 金属材料 疲劳试验 应变控制热机械疲劳试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 11263-2017 |
Hot Rolled H and cut T section steel 热轧H型钢和剖分T型钢 |
China National Standards Rolled |
English PDF |
| GB/T 33556.1-2017 |
Application specification for hospital cleanrooms and associated contRolled environment—Part 1: General guidelines 医院洁净室及相关受控环境应用规范 第1部分：总则 |
China National Standards Rolled |
English PDF |
| GB/T 33740-2017 |
Mobile payment—Test methods of contactless radio frequency interface based on 2.45GHz range contRolled communication technology 手机支付 基于2.45GHz RCC（限域通信）技术的非接触射频接口测试方法 |
China National Standards Rolled |
English PDF |
| GB/T 33738-2017 |
Mobile Payment—Technical requirements for intellegent card based on 2.45GHz RRC(range contRolled communication) technology 手机支付 基于2.45GHz RCC（限域通信）技术的智能卡技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 33736-2017 |
Mobile payment—Technical requirements for contactless radio frequency interface based on 2.45GHz range contRolled communication technology 手机支付 基于2.45GHz RCC（限域通信）技术的非接触射频接口技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 33741-2017 |
Mobile payment—Technical requirements for contactless reader terminal based on 2.45GHz range contRolled communication technology 手机支付 基于2.45GHz RCC（限域通信）技术的非接触式读写器终端技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 33737-2017 |
Mobile payment—Test methods for intellegent card based on 2.45GHz RRC(range contRolled communication) technology 手机支付 基于2.45GHz RCC（限域通信）技术的智能卡测试方法 |
China National Standards Rolled |
English PDF |
| GB/T 33555-2017 |
Cleanroom and associated contRolled environments technical guidelines of electrostatic discharge control 洁净室及相关受控环境静电控制技术指南 |
China National Standards Rolled |
English PDF |
| GB/T 711-2017 |
Hot-Rolled quality carbon structural steel plates sheets and strips 优质碳素结构钢热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 3274-2017 |
Hot-Rolled plates、sheets and strips of carbon structural steels and high strength low alloy structural steels 碳素结构钢和低合金结构钢热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 12443-2017 |
Metallic materials—Torque-contRolled fatigue testing 金属材料 扭矩控制疲劳试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 1499.1-2017 |
Steel for the reinforcement of concrete—Part 1:Hot Rolled plain bars 钢筋混凝土用钢 第1部分：热轧光圆钢筋 |
China National Standards Rolled |
English PDF |
| GB/T 706-2016 |
Hot Rolled section steel 热轧型钢 |
China National Standards Rolled |
English PDF |
| GB/T 14987-2016 |
Iron-Nickel soft magnetic alloy cold-Rolled strips with high hardness and high electrical resistance 高硬度高电阻铁镍软磁合金冷轧带材 |
China National Standards Rolled |
English PDF |
| GB/T 33164.2-2016 |
Spring steels for automotive suspension system—Part 2: Hot Rolled round steel bar and wire rod 汽车悬架系统用弹簧钢 第2部分：热轧圆钢和盘条 |
China National Standards Rolled |
English PDF |
| GB/T 33166-2016 |
Hot-Rolled steel plate,sheet and strip for automobile axle housings 汽车桥壳用热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 33164.1-2016 |
Spring steels for automotive suspension system—Part 1: Hot Rolled spring steel flat bars 汽车悬架系统用弹簧钢 第1部分：热轧扁钢 |
China National Standards Rolled |
English PDF |
| GB/T 20564.9-2016 |
Continuously cold Rolled high strength steel sheet and strip for automobile—Part 9: Quenching and partitioning steel 汽车用高强度冷连轧钢板及钢带 第9部分：淬火配分钢 |
China National Standards Rolled |
English PDF |
| GB/T 33162-2016 |
Continuously hot-Rolled steel sheet and strip for cold-forming steel sections 冷弯型钢用热连轧钢板及钢带 |
China National Standards Rolled |
English PDF |
| GB/T 32977-2016 |
Hot Rolled improved corrosion resisting steel sections 改善耐蚀性能热轧型钢 |
China National Standards Rolled |
English PDF |
| GB/T 32957-2016 |
Cold-drawn or cold-Rolled precision inside diameter seamless steel tubes for hydraulic and pneumatic system service 液压和气动系统设备用冷拔或冷轧精密内径无缝钢管 |
China National Standards Rolled |
English PDF |
| GB/T 2521.1-2016 |
Cold-Rolled electrical steel delivered in the fully-processed state—Part 1: Grain non-oriented steel strip（sheet） 全工艺冷轧电工钢 第1部分：晶粒无取向钢带（片） |
China National Standards Rolled |
English PDF |
| GB/T 2521.2-2016 |
Cold-Rolled electrical steel delivered in the fully-processed state—Part 2: Grain-oriented steel strip（sheet） 全工艺冷轧电工钢 第2部分：晶粒取向钢带（片） |
China National Standards Rolled |
English PDF |
| GB/T 17421.4-2016 |
Test code for machine tools—Part 4: Circular tests for numerically contRolled machine tools 机床检验通则 第4部分：数控机床的圆检验 |
China National Standards Rolled |
English PDF |
| GB/T 17421.2-2016 |
Test code for machine tools—Partie 2: Determination of accuracy and repeatability positioning numerically contRolled axes 机床检验通则 第2部分：数控轴线的定位精度和重复定位精度的确定 |
China National Standards Rolled |
English PDF |
| GB/T 32540-2016 |
Technical requirements for accuracy-contRolled gas nitriding heat treatment 精密气体渗氮热处理技术要求 |
China National Standards Rolled |
English PDF |
| GB/T 32518.1-2016 |
Field test code of contRolled shunt reactor of extra high voltage—Part 1: Multistage controlled shunt reactor 超高压可控并联电抗器现场试验技术规范 第1部分：分级调节式 |
China National Standards Rolled |
English PDF |
| GB/T 32516-2016 |
Thyristor valves of multistage contRolled shunt reactors in extra high-voltage transmission systems 超高压分级式可控并联电抗器晶闸管阀 |
China National Standards Rolled |
English PDF |
| GB/T 20408-2016 |
Radio-contRolled analogue clocks 指针式电波钟 |
China National Standards Rolled |
English PDF |
| GB/T 33433-2016 |
Marine contRolled atmosphere(CA) fresh-keeping storage system 船用气调保鲜系统 |
China National Standards Rolled |
English PDF |
| GB/T 32216-2015 |
Hydraulic fluid power—Test method for the proportional/servo contRolled hydraulic cylinder 液压传动 比例/伺服控制液压缸的试验方法 |
China National Standards Rolled |
English PDF |
| GB/T 3414-2015 |
Hot-Rolled profiled steels for coal mechanism 煤机用热轧异型钢 |
China National Standards Rolled |
English PDF |
| GB/T 32285-2015 |
Hot-Rolled steel H piles 热轧 H 型钢桩 |
China National Standards Rolled |
English PDF |
| GB/T 20564.8-2015 |
Continuously cold Rolled high strength steel sheet and strip for automobile—Part 8: Complex phase steel 汽车用高强度冷连轧钢板及钢带 第8部分：复相钢 |
China National Standards Rolled |
English PDF |
| GB/T 32274-2015 |
Building construction machinery and equipment —Pedestrian-contRolled vibratory (percussion) rammers—Terminology and commercial specifications 建筑施工机械与设备 手扶随行式振动冲击夯 术语和商业规格 |
China National Standards Rolled |
English PDF |
| GB/T 32273-2015 |
Building construction machinery and equipment—Pedestrian-contRolled vibratory plates—Terminology and commercial specifications 建筑施工机械与设备 手扶随行式振动平板夯 术语和商业规格 |
China National Standards Rolled |
English PDF |
| GB/T 32249-2015 |
Aluminum and aluminum-alloy die forgings, hand forgings and Rolled ring forgings—General specification 铝及铝合金模锻件、自由锻件和轧制环形锻件 通用技术条件 |
China National Standards Rolled |
English PDF |
| GB/T 4237-2015 |
Hot Rolled stainless steel plate, sheet and strip 不锈钢热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 3524-2015 |
Hot-Rolled carbon and low alloy structural steel strips 碳素结构钢和低合金结构钢热轧钢带 |
China National Standards Rolled |
English PDF |
| GB/T 3280-2015 |
Cold Rolled stainless steel plate, sheet and strip 不锈钢冷轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 3273-2015 |
Hot-Rolled steel plates and strips for automobile frames 汽车大梁用热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 31943-2015 |
Continuously cold Rolled steel strips for precision welded tubes 精密焊接钢管用冷连轧钢带 |
China National Standards Rolled |
English PDF |
| GB/T 31939-2015 |
Hot-Rolled steel plates (sheets) and strips for coal mine refuge chamber 矿用救生舱用热轧钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 31922-2015 |
Hot-Rolled steel sheets and strips of higher yield strength with improved formability 改善成形性热轧高屈服强度钢板和钢带 |
China National Standards Rolled |
English PDF |
| GB/T 31955.1-2015 |
Control and protection system technical specification of contRolled shunt reactor of extra high voltage—Part 1: Multistage controlled shunt reactor 超高压可控并联电抗器控制保护系统技术规范 第1部分：分级调节式 |
China National Standards Rolled |
English PDF |
| GB 51113-2015 |
Code for design of photovoltaic Rolled glass plant 光伏压延玻璃工厂设计规范 |
China National Standards Rolled |
English PDF |
| GB/T 31462-2015 |
Main body technical specification for 500 kV and 750 kV multistage contRolled shunt reactors 500 kV和750 kV级分级式可控并联电抗器本体技术规范 |
China National Standards Rolled |
English PDF |
| GB/T 31399-2015 |
Sinking rubber roller for cold Rolled sheet 冷轧橡胶沉没辊 |
China National Standards Rolled |
English PDF |
| GB/T 31315-2014 |
Cold drawn or cold Rolled precision weld steel tubes for mechanical structures 机械结构用冷拔或冷轧精密焊接钢管 |
China National Standards Rolled |
English PDF |
| GB/T 30895-2014 |
Hot-Rolled rotary 热轧环件 |
China National Standards Rolled |
English PDF |
| GB/T 20933-2014 |
Hot Rolled sheet pile 热轧钢板桩 |
China National Standards Rolled |
English PDF |
| GB/T 31202-2014 |
Agricultural and forestry machinery and garden machinery—Pedestrian contRolled and hand-held machines—Determination of accessibility of hot surfaces 农业和林业机械及园林机械 手扶控制和手持控制机械 灼热表面可触及性的测定 |
China National Standards Rolled |
English PDF |
| GB/T 6115.4-2014 |
Series capacitors for power systems―Part 4:Thyristor-contRolled series capacitors 电力系统用串联电容器 第4部分：晶闸管控制的串联电容器 |
China National Standards Rolled |
English PDF |
| GB/T 17951.2-2014 |
Cold-Rolled non-oriented electrical steel strip delivered in the semi-processed state 半工艺冷轧无取向电工钢带 |
China National Standards Rolled |
English PDF |
| Find out:345Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
